- PTAB · Oct 6, 2026 · IPR2025-00530 · APJ Scott C Moore · IPR · Final written decision
Original claims 1–9 were canceled; the non-contingent motion to add substitute claims 10–18 was denied for lack of written-description support, and claim 18 was also indefinite.
RulingsFinal written decision- 112 supportMotion to amend, deniedDenied
“that either the ’303 application or the ’838 provisional contain adequate written description support for the disputed feature of limitation [10.d]. Though the disclosures cited by Patent Owner indicate that a secondary identifier can be used to aid in verification of a UAV, these disclosures also make clear that both first and second identifiers are transmitted by and received from the UAV. See, e.g., Ex. 2002, 4:15–17, 30:24–31:6; Ex. 2003 ¶¶ 14, 66. Patent Owner’s reliance on disclosure characterized as transmitting an identifier from a remote computing system “through the UAV” (Reply 2) is not persuasive. The cited disclosures from the ’303 application and ’838 provisional generally disclose that the identifiers transmitted by a UAV can be “generated remotely,” such as by a “remote computing system.” Ex. 2002, 14:23–15:2; Ex. 2003 ¶ 45. But Patent Owner has not identified disclosure indicating that a remote computing system may transmit an identifier to the identification receiver. In the ’303 application and ’838 provisional, only the UAV (which is part of the discrimination system, and thus not “remote”) actually transmits identifiers to the identification receiver. Patent Owner is correct in its assertion that an “aerial system identifier can be generated on-board the aerial system” or “generated remotely . . . at a remote computing system.” Mot. 7 (citing Ex. 2002, 14:23–15:2; Ex. 2003 ¶ 45). But even if a UAV’s identifier was at some time in the past generated by a remote computing system, the subsequent transmission of that identifier from the UAV to the identification receiver would not satisfy the plain language of limitation [10.d]. The claim language “receive … a second identifier from a computing system that is remote to the discrimination system” requires the receipt of a transmission of the second identifier from a remote computing system. This claim language limits the source of the received transmission (i.e., where the particular transmission is “receive[d] … from”). Thus, the relevant issue is from where was the recited second identifier received. The relevant is not where the second identifier was originally generated.” slip op. at 12
- Disclosure Requirements (§112) › Definiteness (Nautilus)DefiniteIndefiniteMixed
“We determine that the disputed language in limitation [10.d] is not indefinite. There is no recitation in proposed substitute claim 10 that the second identifier is transmitted solely from the identifier transmission system. Thus, the alleged irreconcilable contradiction cited by Petitioner is not recited in the claims. Petitioner’s position appears to rest on the fact that the ’303 application and ’838 provisional do not disclose receiving the second identifier from a remote computing system. See Sur-reply 6 (“To manufacture written description support, [Patent Owner] argues the claim encompasses identifiers routed ‘through the UAV.’”). Though we agree that limitation [10.d] lacks adequate written description support, this defect does not render the claim indefinite because the scope of limitation [10.d] is otherwise reasonably certain based on its plain language. See supra § III.C.4.” slip op. at 18
- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportReference not prior artPriority date, deniedDecided for patent owner
“In contrast, the ’393 provisional never discloses that the described drone defense system may use the identity of a detected drone to develop a particular countermeasure. The disclosed RTSS certainly uses identity information to determine whether a drone is a threat. And if a threat is identified, the RTSS immediately starts “a series of processes … to determine what rule of engagement will be applied on the intruding drone.” Ex. 1006 ¶ 10. The ’393 provisional discloses that the system may select a particular countermeasure based on (i) the particular zone within a protected area within which a drone is located, (ii) “the behavior of the hostile drone,” or (iii) “other instructions.” Id. ¶¶ 9, 10. But the ’393 provisional never discloses that these “other instructions” may include the identity of the drone. The system disclosed in the ’393 provisional uses the identity of a drone to determine whether to activate the countermeasure system. See id. ¶¶ 16–18. But there is no disclosure in the ’393 provisional that the countermeasure system, once activated, uses the identity of the drone to develop the particular countermeasure to be employed. See generally Ex. 1006. Thus, though the Whitmarsh reference itself contains ample written description support for limitation [19e], the earlier-filed ’393 provisional does not. On this record, and having reviewed the ’393 provisional in its entirety, we determine that the ’393 provisional does not “reasonably convey[] to those skilled in the art that the inventor had possession of” the subject matter of limitation [19e] of Whitmarsh’s claim 19 “as of the filing date” of the ’393 provisional. See Ariad, 598 F.3d at 1351.” slip op. at 27
§ 102 anticipation§ 112 disclosurecites NautilusPatents in suitUS 10,249,199 - PTAB · Oct 6, 2026 · IPR2025-00525 · APJ Scott C Moore · IPR · Final written decision
Original claim 21 was canceled; the Board denied substitute claim 22 for new matter and held it obvious under §103 based on six combinations.
RulingsFinal written decision- 112 supportMotion to amend, deniedDenied
“First, Patent Owner has not shown possession of the disputed feature of a “radio communication module [that] is configured to utilize a secure identifier, the secure identifier comprising a specified excitation.” In the ’406 application, the term “excitation” is used exclusively to refer to a light beam signal. See Ex. 2015, 7:8–13, 9:8–10, 23:9.2 The ’406 application discloses that an identification box on an aircraft may include both an RF module and a separate light sensor. See Ex. 2015, 7:3–11. But nowhere does the ’406 application describe receiving a light beam (e.g., an excitation) with the RF module of the identification box (as opposed to the light sensor), so as to provide support for proposed substitute claim 22’s recitation of a “radio communication module” configured to utilize “a secure identifier . . . comprising a specified excitation.” We disagree with Patent Owner that it suffices that one of ordinary skill in the art “would recognize that these disclosures are equally applicable to the RF-only embodiments” (Reply 5). “It is not sufficient for purposes of the written description requirement . . . that the disclosure, when combined with the knowledge in the art, would lead one to speculate as to modifications that the inventor might have envisioned, but failed to disclose.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997). On this record, and having reviewed the ’959 Patent, the ’153 provisional, and the ’406 application, we find no evidence in those documents that the named inventor was in possession of the concept of a radio communications module “configured to utilize a secure identifier” where “the secure identifier compris[es] a specified excitation.” Second, setting aside the “radio communication module” in proposed substitute claim 22, Patent Owner also has not shown that the named inventor was in possession of the feature of a “secure identifier comprising a specified excitation.” Patent Owner’s argument that the ’406 application describes a light beam directed to a particular aircraft (see Reply 4–5) is 2 The same is true of the ’153 provisional. See Ex. 2016 ¶¶ 29, 34. unavailing. The fact that the properties of a particular light beam indicate that the light beam is intended for a particular aircraft does not demonstrate that the light beam is a “secure identifier,” as we have construed that term. Patent Owner has not identified any disclosure in the ’406 application of a “secure identifier” comprising a light beam, let alone that such light beam can be utilized by a “radio communication module.” The only references to “secure” identifiers in the ’406 application describe radio frequency signals. See Ex. 2015, 2:4–6, 15:21–17:12.3 Having reviewed the ’959 Patent, the ’153 provisional, and the ’406 application, we find no evidence in those documents that the named inventor was in possession of the concept of a “secure identifier comprising a specified excitation.”” slip op. at 15
- ScopeDecided for patent owner
“not impermissibly broaden the scope of the claims of the ’959 Patent. As Patent Owner suggests, there were no limitations in original claim 21 on the type of radio signal the radio communication module could receive, and so it follows that proposed substitute claim 22 does not now encompass receiving a broader set of radio signals. We see no basis for Petitioner’s argument that the past tense verb “received” limited original claim 21 to “signals of a compatible ‘type’ and ‘range.’” Opp. 7. Moreover, the claim language (with the proposed deletion shown double brackets) provides that “the radio communication module is configured to receive a [[received]] radio signal.” Any radio signal that the radio communications module receives would necessarily be a “received” radio signal. Thus, deleting the redundant word “received” does not enlarge the scope of this claim limitation. We also are not persuaded by Petitioner’s suggestion that removing the term “received” broadens original claim 21 by deleting a requirement that the radio signal have already been previously received by the claimed device. See Sur-reply 9. Original claim 21 simply recited, using redundant language, that “the radio communication module is configured to receive a received radio signal.” Ex. 1001, 18:5–7. The most natural reading of this language is that the phrase “received radio signal” is just a description of a radio signal that is received by the recited radio communications module. Petitioner has cited no persuasive evidence that one of ordinary skill in the art would have counterintuitively interpreted this language to impose an additional requirement that the “received radio signal” must have been received twice—a first time by some other component of the device, and a second time by the recited radio communication module. Accordingly, we determine that the proposed amendment does not improperly broaden claim scope.” slip op. at 10
- Disclosure Requirements (§112) › Definiteness (Nautilus)IndefiniteNot shown unpatentable
“572 U.S. 898 (2014). See Memorandum: Approach to Indefiniteness Under 35 U.S.C. § 112 in AIA Post-Grant Proceedings (Jan. 6, 2021).4 Under Nautilus, a claim is indefinite if fails to “inform those skilled in the art about the scope of the invention with reasonable certainty.” 572 U.S. at 910. We agree with Patent Owner that neither of the identified terms are indefinite. Regarding the term “low-altitude aircraft,” we determine the Specification provides a sufficient basis for understanding the scope and meaning of this term with reasonable certainty. The U.S. Court of Appeals for Federal Circuit has explained that, when a term of degree is recited in a claim, it is necessary “to determine whether the patent’s specification provides some standard for measuring that degree.” See Seattle Box Co. v. Indus. Crating & Packing, Inc., 731 F.2d 818, 826 (Fed. Cir. 1984); see also Datamize, LLC v. Plumtree Software, Inc., 417 F.3d 1342, 1350 (Fed. Cir. 2005) (“Some objective standard must be provided in order to allow the public to determine the scope of the claimed invention.”). Here, the Specification describes the related art as including “small UASs (e.g., aircrafts up to 25 pounds flying up to 500 ft of the low altitude airspace).” Ex. 1001, 1:50–52. One of ordinary skill in the art would understand from the Specification that the cited disclosure provides an objective standard for determining the scope of a low-altitude aircraft as one that is designed to fly up to a maximum altitude of about 500 feet.” slip op. at 20
- Skill levelSkill level petitioner adoptedDecided for petitioner
“In our Institution Decision, we adopted Petitioner’s proposal that one of ordinary skill in the art would have had the following qualifications: [E]ither (1) a Bachelor of Science in Mechanical Engineering, Electrical Engineering, Aerospace engineering, or an equivalent field, as well as at least 2 years of academic or industry experience in the aerospace, avionics, telecommunications, or electronic device manufacturing industry, or (2) at least four years of industry experience in any of the above industries. Paper 13, 5 (citing Pet. 21). Patent Owner has not disputed this formulation; thus, we adopt it for purposes of this Decision. See Paper 13, 10–11 n. 8.” slip op. at 23
§ 103 obviousness§ 112 disclosurecites Graham · NautilusPatents in suitUS 10,713,959 - Uatp IP LLC v. Slick Slide LLCSome claims unpatentablePTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision
Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner
“1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20
Patent outcomesUS 11,998,854 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · NautilusPatents in suitUS 11,998,854 - Alpinestars S.P.A. / Alipinestars USA Inc. v. Dainese S.P.A.Rehearing deniedPTAB · Feb 9, 2026 · IPR2025-00750 · APJ Benjamin D M Wood · IPR · Rehearing
The Board denied rehearing, leaving institution denied because Petitioner did not show a reasonable likelihood of prevailing on claims 1–22 under the challenged obviousness grounds.
RulingsRehearing decision- RehearingRehearing, deniedDenied
“Petitioner misstates the Decision’s reasoning. As is clear from the previous discussion, we determined that Petitioner’s articulated reasons for combining EP’536 with CN’180 lacked a rational underpinning, not because “EP’536 does not relate to ‘air bags,’” but because the means by which EP’536’s device inflates differs fundamentally from that of CN’180’s device. Dec. 17–18. Petitioner did not acknowledge this critical difference in the Petition, and continues not to do so in its Rehearing Request.” slip op. at 5
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“EP’536 with CN’180 lacked a rational underpinning because EP’536’s inflation mechanism differs fundamentally from CN’180’s inflation mechanism. Dec. 17–18. As we stated, whereas CN’180’s fall-protection belt uses an airbag that requires an external source of pressurized air to inflate, EP’536’s garment does not need an external inflation device because “the gas generating agent 18 in each envelope automatically generates gas and inflates the envelopes in response to rising temperatures.” Id. at 18 (citing Ex. 1004 ¶ 15; Ex. 1005 ¶¶ 5, 19). This difference reflects the fundamentally different purposes of the two devices: CN’180’s device is designed to provide “fall protection” to, e.g., “elderly people,” (Ex. 1005 ¶ 1, 3), whereas EP’536’s device provides “adaptive thermal insulation” for, e.g., garments worn by fire fighters. Ex. 1004 ¶¶ 1–3, 250. Because of the different means by which EP’536’s and CN’180’s devices inflate and the different purposes for doing so, we were not persuaded that one of ordinary skill in the art would have combined the references as Petitioner proposed. Dec. 18. We further noted that the modification would not have improved the reusability of EP’536’s device “by having only one mechanism to recharge,” because EP’536’s “gas generating agent does not need any ‘mechanism to recharge.’” Dec. 18. Instead, we noted EP’536’s teaching that its gas generating agent “automatically recombines or condenses in response to a temperature decrease to return the envelopes, and therefore the garment, to its original thickness, at which point the gas generating agent is ready for subsequent reactivation.” Id. (citing Ex. 1004 ¶¶ 139–141). Finally, we determined that replacing EP’536’s envelopes with CN’180’s airbag “would have made EP’536’s invention unsuitable for its intended purpose: providing a protective garment with ‘adaptive thermal insulation.’” Dec. 19. We stated that “Petitioner does not suggest, and we have found nothing in the record to establish, that CN’180’s airbag would provide this feature.” Id. at 20.” slip op. at 3
- Obviousness (§103) › KSR rationalesMotivation not foundNot shown unpatentable
“rationales for combining EP’536 and CN’180. Reh’g Req. 6–7. First, Petitioner asserts that we “improperly rejected Petitioner’s ‘simple substitution’ evidence in view of [the Board’s] incorrect conclusion that EP’536 does not disclose an ‘external source of inflation [EP’536’s dosing aids].’” Id. at 6 (citing Dec. 18–19). This argument is unpersuasive at least because, as we discussed above, EP’536’s dosing aids do not constitute an external source of inflation. Petitioner further argues that we incorrectly evaluated its “obvious to try” rationale because, contrary to our analysis, Petitioner did in fact identify a problem to be solved by its “finite number of solutions”: “simplify[ing] the design and reduc[ing] the number of required inflation mechanisms.” Id. at 6–7. The Petition’s entire “obvious to try” discussion is as follows: [A] POSITA would have found it obvious to try a one-piece airbag 10 with strip-shaped inflation units 12 in the EP’536- CN’180 airbag system because it would have been a selection from a finite number of identified predictable solutions (i.e., using one chamber with connected individual inflation units 12 versus multiple individual envelopes 20). 5 Petitioner also argues that dosing aids are “needed in order to make the disclosed device reusable.” Reh’g Req. 5–6. This is incorrect, as EP’536 conveys that the reusability of the device is a result of the gas generating agent condensing or recombining when temperatures fall. Ex. 1004 ¶¶ 139– 141. Even if it were true, however, it is unclear how it would support Petitioner’s argument. Pet. 16. As is evident, Petitioner did not identify a design need, market pressure, or other problem that would have been addressed by its identified “solutions,” and therefore we were not persuaded by this rationale. Dec. 19. Petitioner’s attempt to cure this deficiency in its Rehearing Request is tardy. We cannot misapprehend or overlook an assertion that Petitioner fails to make in the Petition. It is also insufficient. Petitioner does not provide any evidence of a known design need or market pressure to “simplify [EP’536’s] design” or reduce the number of “required inflation mechanism” it uses.” slip op. at 7
§ 103 obviousnessPatents in suitUS 12,012,065 - Solaris Oilfield Site Services Operating, LLC / Solaris Oilfield Site Services Personnel, LLC v. Masaba, Inc.All claims unpatentablePTAB · Jan 26, 2026 · IPR2024-01179 · APJ Carl M Defranco · IPR · Final written decision
Claims 1–25 are unpatentable under § 103 over the asserted combinations of Waldner, Dynatek, and additional references; the Board cancelled all challenged claims.
RulingsFinal written decision- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“Also, to the extent Masaba relies on extrinsic expert testimony, we note that Masaba’s expert cites absolutely no support for his understanding of the claims, much less explains why we should adopt his understanding over the plain and ordinary meaning of “conveying aggregate” and “moving aggregate.” See Ex. 2004 ¶ 34. Absent supporting citations, such extrinsic testimony is entitled to little, if any, weight. As such, we reject the notion that Waldner’s discharge chute member 242 is not a conveyor “for conveying aggregate” or “for moving aggregate,” as required by claim elements 1[h] and 1[i].” slip op. at 21
- Skill levelSkill level petitioner adoptedDecided for petitioner
“We disagree that Dr. Durham does not possess the necessary level of skill in the art to qualify as an expert in this case. Looking at the specification of the ’689 patent and the prior art of record, we think Masaba sets the bar too high. We acknowledge that one of ordinary skill in the art should have some education and/or experience in the mechanical art of conveying aggregate materials, but we do not think opining on the ’689 patent and asserted prior art necessarily requires that person to have the amount of education and experience that Masaba advocates. The ’689 patent relates generally to an “aggregate transferring system for receiving aggregate from a vehicle and elevating the aggregate to a higher vertical level for deposit into, for example, a silo.” Ex. 1001, 1:15– 18. And, as described in the ’689 patent and discussed later, the transferring system is an assembly of known types of conveyors, such as a belly-dump truck conveyor, a bucket elevator, and an articulated belt conveyor, for transferring the aggregate horizontally and vertically from a belly-dump truck to the discharge point, such as a silo. Without doubt, Dr. Durham has enough education and experience to reliably opine on the combination of known parts.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Plain and ordinary meaningNo construction needed
“We reject this argument for several reasons. First, nowhere does the plain language of the claims specify how the aggregate is conveyed or moved from the conveyor extension assembly’s inlet to its outlet, be it passively by means of gravity or actively by means of a conveyor belt. Instead, the claims simply use those verbs according to their plain and ordinary meaning, which is “to transfer or deliver” or “to cause to go or pass” from one place to another. See Ex. 3001, 253 (defining “convey”), 760 (defining “move”).10 Second, the specification of the ’689 patent similarly uses these terms in a plain and ordinary sense, without ever attributing to them some sort of special meaning. See, e.g., Ex. 1001, 4:9–12 (“The apparatus 10 is suitable for performing the transfer of aggregate from 10 We reference the original pagination of the dictionary in which these definitions appear. one location to another, such as, for example, from a vehicle carrying the aggregate to a silo 1 for storing the aggregate.”). The ’689 patent specification also makes clear that active conveyance of the aggregate is an option and not a requirement of the claimed invention, stating that the conveyor extension assembly “may further include a conveyor belt 150.” Ex. 1001, 10:60–66 (emphasis added). Limiting claim elements 1[h] and 1[i] to a device “for actively conveying” or “for actively moving aggregate” would improperly import limitations from the specification into the claims. Thus, based on the intrinsic evidence, we determine that claim elements 1h and 1k are properly construed to encompass passive and/or active movement of the aggregate via the conveyor extension assembly.” slip op. at 20
- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)Not reached
“Owner asserts” that two claim terms—“unloader structure” and “trailer structure”—should be construed as means-plus-function limitations under 35 U.S.C. § 112(f), Solaris submits an express construction detailing the corresponding structure in the specification for performing the recited function of the claimed unloader and trailer structures. See id. at 24–25. Only in disputing Solaris’s Ground 3 does Masaba advocate that the claim term “trailer structure” should be construed under § 112(f), and then only in conjunction with dependent claims 3 and 21. See PO Resp. 58. As such, we address Masaba’s proposed construction in our analysis of Ground 3. We now turn to Solaris’s grounds of unpatentability.” slip op. at 12
Patent outcomesUS 11,780,689 unpatentableClaim construction§ 103 obviousnesscites KSRPatents in suitUS 11,780,689 - Weatherford U.S., L.P v. Halliburton Energy Services, Inc.Some claims unpatentablePTAB · Dec 9, 2025 · IPR2024-00990 · APJ Brent M Dougal · IPR · Final written decision
Claims 11–12 and 14–20 are unpatentable; claims 1–10 and 21–23 are not shown unpatentable. Substitute claims 29–37 are unpatentable, and the motion to amend is denied as to them.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“The level of skill is uncontested. Patent Owner adopts the level of skill identified by Petitioner as: [at] the time of the alleged invention in 2018, a POSITA[2] would have had a B.S. degree in mechanical or petroleum engineering or a similar technical discipline, with at least five years of experience in oil or gas well drilling, completion, and/or subsurface production operations or in technical support of such operations including at least some experience in unconsolidated formations utilizing sand control methods and means. Also,” slip op. at 8
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed
“on embodiments of Yeh with concentric sand screens having nine shunt tubes (six transport tubes and three packing tubes) (Yeh Figures 4A–B) and eccentric sand screens with four shunt tubes (two transport tubes and two packing tubes) (Yeh Figures 8A, 8C). See Pet. 32–37, 39, 41–43. Yet, Petitioner’s reasoning as to why “a higher-pressure shunt tube assembly necessitated greater wall thickness” rests on an unspoken one to one comparison between the shunt tubes of the different systems. See id.; see also Ex. 1003 ¶¶ 291–297 (Petitioner’s declarant comparing possible transport tubes of different pressure regions without considering or addressing any difference in the number of transport tubes). However, the embodiments relied on by Petitioner have different numbers of shunt tubes, and thus the greater wall thickness does not appear to be “necessitated” in the way inferred by Petitioner. Further, Petitioner’s analysis would seem to be most appropriate when comparing two concentric sand screens for different pressure regions, or two eccentric sand screens for different pressure regions. relies on Yeh’s teachings related to a horizontal well bore of 5000 feet for the “concentric screen → crossover tool → eccentric screen” arrangement, as well as, for why the concentric screen needs to be rated for a high pressure. Pet. 32–37, 39, 41–43. Petitioner also refers to these features for why one of skill in the art would combine the teachings of Yeh and Yeh2. Id. at 32. However, on cross-examination, Petitioner’s declarant agreed that it is concentric sand screens having a 6x3 shunt tube design that would provide the noted benefits of being rated for a higher pressure and being more robust (as relied on in the Petition), as compared to eccentric sand screens. Ex. 2013, 42:20–43:8; Sur-reply 4–5. This also exposes another issue with Petitioner’s arguments. Though Petitioner identifies that one of skill in the art would be aware that material choice, wall thickness, and pipe diameter all impact burst pressure of a pipe (Pet. 42 (citing Ex. 1017, 24 (Equation (14))), the Petition essentially ignores the fact that the claims do not require a single pipe in isolation. The claims require two shunt tube assemblies, each surrounding a base pipe within a wellbore. It is uncontested that a wellbore provides a confined space for such a system and thus any change in wall thickness of one pipe can result in a significant impact in the function of the other pipes. We find the testimony of Petitioner’s declarant (see, e.g., Ex. 1003 ¶¶ 290–297) unpersuasive when discussing wall thickness because it focusses on basic considerations of a standalone pipe, without sufficient consideration of the claimed completion assembly with its required pipe and tube structure. PO Resp. 20–26.” slip op. at 17
- Strike new argumentNew argument disregardedDecided for patent owner
“In response to Patent Owner’s argument concerning Yeh’s embodiments relied on in the Petition, Petitioner argues for the first time that Patent Owner’s declarant “conceded, Yeh discloses that both concentric and 47:19–48:21). Petitioner does not provide a citation to Yeh or a citation to where the Petition relies on the same number of shunt tubes between concentric and eccentric screens. The deposition cited by Petitioner discusses Yeh at column 16, lines 26 through 35. However, the Petition does not cite or rely on these teachings of Yeh. Thus, we decline to consider this late argument.4 See 35 U.S.C. § 312(a)(3) (requiring the petition to identify “with particularity . . . the grounds on which the challenge to each claim is based, and the evidence that supports the grounds”); 37 C.F.R. § 42.104(b)(5).” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“Thus, we agree with Petitioner that the combination of Yeh and Yeh2 teaches determining the shunt tube system operating pressures associated with the distal end of the production zone, but also more generally, determining the operating pressures along the entire production zone. With this knowledge of the system operating pressures, Petitioner argues that one of skill in the art would have selected eccentric screens for the distal end of the production zone “at any point at which the slurry pressure dropped below the pressure capacity of the eccentric screen shunt tubes.” Pet. 66 (citing Ex. 1005, 30:16–20; Ex. 1003 ¶ 388). In other words, knowing that the pressure decreases as you approach the toe, Yeh’s low-pressure rated eccentric screens could be used from some point prior to and covering the toe. determined pressure.” PO Resp. 37–38. We disagree. As discussed above, the record supports Petitioner’s position that one of skill in the art would have “understood the need to determine the shunt tube system operating pressure throughout the horizontal wellbore.” Ex. 1003 ¶ 383; see also Pet. 64–65. We find convincing Petitioner’s argument that one of skill with this understanding of the system pressures would select a shunt tube system rated to not only address the distal end, but also to address the needs of the adjacent region, so long as the pressure rating supported such a selection. See Pet. 65–67; Ex. 1003 ¶¶ 385–388.” slip op. at 22
Patent outcomesUS 11,333,007 mixedClaim construction§ 101 eligibility§ 103 obviousness§ 112 disclosurecites GrahamPatents in suitUS 11,333,007 - Tesla, Inc. v. Iqar Inc.Rehearing deniedPTAB · Nov 6, 2025 · IPR2024-00543 · APJ Sean P O’Hanlon · IPR · Rehearing
The Board denied Tesla’s rehearing request and left claims 8 and 18 not shown unpatentable under §103 over Hongo, Obradovich, Niki, and Newstrom.
RulingsRehearing decision- RehearingRehearing, deniedDenied
“II. STANDARD OF REVIEW A party requesting rehearing bears the burden of showing that the decision should be modified. 37 C.F.R. § 42.71(d). The party must identify specifically all matters we misapprehended or overlooked, and the place where each matter was previously addressed in a motion, an opposition, or a reply. Id.” slip op. at 2
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“Petitioner’s counsel during the hearing or any of Petitioner’s arguments and evidence. As confirmed by Petitioner’s counsel, Petitioner relies solely on Newstrom’s disclosure of loading its spatial database 20 into solid state memory via a “wireless connection to [a] server” in asserting that the database “may be hosted on a server that is remote from a vehicle.” Pet. 83 (citing Ex. 1012, 8:26–38; Ex. 1003 ¶ 197). Column 8, lines 27–29 is the only disclosure in Newstrom of a “wireless connection.” Although Petitioner argues that Newstrom’s system communicates wirelessly with the geospatial database while the vehicle is being driven (see Dec. 38 (citing Pet. 83); Tr. 19:20–22), Petitioner relies solely on the single instance of “wireless” in Newstrom’s disclosure to satisfy the recitation that the database (which Petitioner maps to Newstrom’s geospatial database 20) is “remote.” In the Decision, we explained that Petitioner’s reliance on Newstrom’s “wireless connection” and its assertion that the geospatial database may be hosted on a remote server were not persuasive to satisfy Petitioner’s burden to prove the unpatentability of claims 8 and 18 by a preponderance of the evidence, especially given Newstrom’s express disclosure that the geospatial database is located on the vehicle. Dec. 40–42. For example, we stated: Petitioner does not explain adequately why Newstrom’s disclosure that, when first initializing the database manager, the geospatial database is loaded into solid state memory by, for example, wirelessly transferring data from a server means that the geospatial database is remote from the vehicle. Similarly, Petitioner does not explain adequately why Newstrom’s disclosure that the database manager can load new portions of the data into solid state memory as the vehicle location changes means that the geospatial database is remote from the vehicle. Nor does Petitioner’s conclusory contention that “the geospatial database 20 may be hosted on a server that is remote from a vehicle” (Pet. 83 (emphasis added)) apprise us of disclosure that Newstrom’s geospatial database is remote from the vehicle. Dr. Morellas’ testimony is substantially identical to the Petition (see Ex. 1003 ¶197) and, thus, also fails to provide adequate support for Petitioner’s assertions. During the hearing, counsel for Petitioner confirmed that it relied solely on Newstrom’s disclose of the database using a “wireless connection” by which the database manager communicates with the database in arguing that Newstrom’s geospatial database 20 is remote from vehicle 12. Tr. 19:14–24; see also Ex. 1012, 8:27–29. Petitioner, however, fails to explain adequately how such wireless communication indicates that the database is not located on vehicle, especially given Newstrom’s express disclosure (discussed above) that the database is onboard the vehicle.” slip op. at 5
- Strike new argumentNew argument disregardedDecided for patent owner
“Initially, Petitioner’s reliance on assertions made in its Reply, relying on Dr. Morellas’ second declaration, fail to persuade us that we overlooked or misapprehended any arguments made in the Petition. Such post-institution arguments attempting to bolster the Petition are untimely and, thus, improper. See Patent Trial and Appeal Board Consolidated Trial Practice Guide 73 (Nov. 2019).6 Even considering Petitioner’s Reply arguments, however, we are not” slip op. at 7
§ 103 obviousnessPatents in suitUS 10,882,399 - PTAB · Jun 11, 2025 · IPR2025-00262 · APJ Mitchell G Weatherly · IPR · Institution
The Board instituted IPR of claims 1–20 on all grounds, finding a reasonable likelihood that Haley and Lai render the claims obvious.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Institution of an inter partes review is authorized by statute when “the information presented in the petition filed under section 311 and any response filed under section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Based on our review of the record,1 we conclude that Petitioner is reasonably likely to prevail with respect to at least one of the challenged claims.” slip op. at 2
- Other 314aDenied
“Patent Owner argues that we should discretionarily deny the Petition based on alleged deficiencies in the Petition. Specifically, Patent Owner argues that “even if arguments as to a few claims might have been properly presented in the Petition, a decision to institute here would require the Board to address—for the first time and with no Petitioner input—critical claim construction issues affecting nearly every claim” in contravention of the requirements of 37 C.F.R. § 42.104(b)(3). Prelim. Resp. 34–35. For the reasons discussed above, we are not persuaded on the current record that Petitioner has violated 37 C.F.R. § 42.104(b)(3), or that critical and unresolved claim interpretation issues justifying discretionarily denying the Petition exist. We, therefore, decline to deny institution on this basis.” slip op. at 10
- Skill levelSkill level board ownOther
“we view the prior art and the claimed invention. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). The parties’ briefs do not propose a specific definition of a level of ordinary skill in the art. See generally, Pet., Prelim. Resp. Dr. Vallee, however, testifies that one of ordinary skill in the art relevant to the ’954 patent: would have either (i) a Master’s degree in mechanical engineering with at least two years of experience in power nailer design; (ii) a Bachelor’s degree in mechanical engineering with at least five years of experience in powered nailer design; or (iii) ten (or more) years of experience in powered nailer design. This experience in powered nailer design would include mechanical design, tool design, manufacturing, mechanics of materials, stress analysis, ergonomics, and human factors. Ex. 1003, ¶ 49. For purposes of this Decision, we adopt and apply Dr. Vallee’s formulation regarding the level of ordinary skill in the art.” slip op. at 6
- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesOther
“1. Lifter The Petition contends that the “lifter” limitation is a means-plus- function limitation, Pet. 7, which Patent Owner does not dispute, Prelim. Resp. 15–26. Patent Owner argues, however, that Petitioner has “fail[ed] to identify any structure in the ’007 [sic, ’954] Patent to perform the claimed function.” Prelim. Resp. 15. We disagree. Petitioner identifies the structures in the Specification corresponding to the “lifter” as follows: The “lifter member” of the ’954 patent includes a rotatable cam lifter 100 (yellow, below left), with pin 104, 106, and 108 (green) on its face surface that engage protrusions 92 (blue) on the driver member 90 (orange). ’954 patent, 9:25–41, 16:32–46, Fig. 12. The ’954 patent also discloses two-pin variants: lifter members 465 and 480 in Figs. 31, 33. ’954 patent, 32:12–27, 32:45–60. Pet. 15. This identification of corresponding structure is sufficient to satisfy 37 C.F.R. § 42.104(b)(3). We also note that at this stage of the proceeding, Patent Owner does not dispute that Petitioner has correctly identified the corresponding structure. The parties may further address the proper interpretation of “lifter” at trial.” slip op. at 7
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · GrahamPatents in suitUS 10,478,954 - PTAB · Jun 11, 2025 · IPR2025-00261 · APJ Mitchell G Weatherly · IPR · Institution
Instituted IPR of claims 1–20 on all grounds after finding a reasonable likelihood that Haley anticipates claims 1, 7, 8, 17, and 20 and Haley with Lai renders the remaining claims obvious.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Institution of an inter partes review is authorized by statute when “the information presented in the petition filed under section 311 and any response filed under section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Based on our review of the record,1 we conclude that Petitioner is reasonably likely to prevail with respect to at least one of the challenged claims.” slip op. at 2
- Other 314aInstitution denied discretionary otherDenied
“Patent Owner argues that we should discretionarily deny the Petition based on alleged deficiencies in the Petition. Specifically, Patent Owner argues that “even if arguments as to a few claims might have been properly presented in the Petition, a decision to institute here would require the Board to address—for the first time and with no Petitioner input—critical claim construction issues affecting nearly every claim” in contravention of the requirements of 37 C.F.R. § 42.104(b)(3). Prelim. Resp. 33–35. For the reasons discussed above, we are not persuaded on the current record that Petitioner has violated 37 C.F.R. § 42.104(b)(3), or that critical and unresolved claim interpretation issues justifying discretionarily denying the Petition exist. We, therefore, decline to deny institution on this basis. E. Claims 1, 7, 8, 17, and 20: Anticipation by Haley” slip op. at 11
- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for petitioner
“1. Lifter The Petition contends that the “lifter” limitation is a means-plus- function limitation, Pet. 7, which Patent Owner does not dispute, Prelim. Resp. 10–14. Patent Owner argues, however, that Petitioner has “fail[ed] to identify any structure in the ’007 Patent to perform the claimed function.” Prelim. Resp. 10. We disagree. Petitioner identifies the structures in the Specification corresponding to the “lifter” as follows: The “lifter” (“lifter member”) of the ’007 patent includes a rotatable cam lifter 100 (yellow below left), with pin 104, 106, and 108 (green) on its face surface that engage protrusions 92 (blue) on the driver member 90 (orange). ’007 patent, 9:36–52, 16:39–53, Fig. 12. The ’007 patent also discloses two-pin variants: lifter members 465 and 480 in Figs. 31, 33. ’007 patent, 32:23–38, 32:56–33:4. Pet. 17. This identification of corresponding structure is sufficient to satisfy 37 C.F.R. § 42.104(b)(3). We also note that at this stage of the proceeding, Patent Owner does not dispute that Petitioner has correctly identified the corresponding structure. The parties may further address the proper interpretation of “lifter” at trial.” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“gas pressure system” recited in the preamble of independent claims 1 and 17. Prelim. Resp. 21–22. Patent Owner further argues that Petitioner, through its comparison of claims 1 and 17 to Haley, improperly implies that the “gas pressure system” can be “limited to a distinct portion of a power tool.” Id. at 23. Patent Owner contends that such an interpretation is improper because the “gas pressure system” must refer to “the entire system,” because the “structure of the claims themselves . . . include[s] . . . every component of the tool.” Id. We disagree. The “gas pressure system” recited in the preambles of claims 1 and 17 expressly refers to a system that is “for a power tool” and thus does not necessarily refer to “the entire” tool or “every component of the tool.” Ex. 1001, 39:6 (claim 1), 40:51 (claim 17). Neither claim 1 nor claim 17 recites, for example, the lifter or driver, which are required elements of an “entire” tool. Id. at 39:6–22 (claim 1), 40:51–67 (claim 17). The lifter and driver are introduced in dependent claims 2 and 18. Id. at 39:23–30 (claim 2), 41:1–9 (claim 18). Still other necessary components of a tool, e.g., a motor and power source, are introduced in dependent claims 5 and 19. Id. at 39:40–42 (claim 5), 41:10–13 (claim 19). By contrast to claims 1 and 17, independent claims 9 and 14 recite a “portable fastener driving tool” and expressly recite many necessary components of such a tool including the driver, lifter, prime mover, and power source. Id. at 39:54 (claim 9), 40:20 (claim 14). Accordingly, we find that the “gas pressure system” of claims 1 and 17 broadly refers to a portion of a power tool rather than the “entire system” or “every component of the tool.” slip op. at 8
Claim construction§ 102 anticipation§ 103 obviousnessDiscretionary denialcites Phillips · KSRPatents in suitUS 11,034,007 - Shopify Inc. v. DKR Consulting LLCInstitution deniedPTAB · May 29, 2025 · IPR2025-00133 · APJ Miriam L Quinn · IPR · Institution
The Board denied institution of IPR2025-00133 because a district court had found all challenged claims patent-ineligible, making review administratively inefficient.
RulingsInstitution decision- Other 314aInstitution denied discretionary otherDenied
“B. Discretionary Denial Based on Hulu The Hulu decision held that “[b]ecause the patent claims already stand invalid, it is unnecessary to institute another proceeding to review them for patentability under other grounds.” Hulu at 2. The decision reasoned that “[i]n the event the Federal Circuit reverses the district court’s decision, Petitioner may raise such invalidity arguments in the district court on remand.” Hulu at 3 (remanding the panel’s institution decisions and denying institution). The Hulu rationale is grounded in the statutory estoppel provisions of 35 U.S.C. § 315(e) that apply only to a “final written decision;” statutory estoppel does not prevent a petitioner from raising the same invalidity grounds in district court if the petition is denied. See Intuitive Surgical, Inc. v. Ethicon LLC, 25 F.4th 1035, 1041 (Fed. Cir. 2022) decision.”). Even if inter partes review is instituted but later terminated with respect to a petitioner, e.g., after settlement, no statutory estoppel attaches to the petitioner, a real party in interest, or privy. See 35 U.S.C. § 317(a) (“If the inter partes review is terminated with respect to a petitioner under this section, no estoppel under section 315(e) shall attach to the petitioner, or to the real party in interest or privy of the petitioner, on the basis of that petitioner’s institution of that inter partes review.”). Thus, discretionary denial would not eclipse Petitioner’s ability to assert invalidity of the Challenged Claims in the District Court litigation. The Petition explains that the District Court granted a Motion to Dismiss and found all of the Challenged Claims to be patent ineligible under 35 U.S.C § 101. 130 Pet. 2 (citing Ex. 1025, 10, 14; DKR Consulting LLC v. Shopify, Inc., Case No. 2:23-cv-06904 (C.D. Cal.)); see also Ex. 3001 (District Court judgment stating “[p]ursuant to this Court’s Order Granting Defendant’s Motion to Dismiss, it is ordered that judgment is entered on all claims in favor of Defendant Shopify, Inc.”). In the Show Cause Paper, Petitioner confirms the scope of the District Court Judgment as applying to all of the challenged claims of the ’678 and ’237 patents. See Show Cause Paper at 6 (“All challenged claims are subject to the district court’s Order and Judgment.”). All of the Challenged Claims in this proceeding having been found invalid, we see no reason to institute inter partes review. As stated in Hulu, if the Federal Circuit reverses the District Court’s Judgment that the challenged claims are invalid as patent ineligible under Section 101, “Petitioner may raise such invalidity arguments in the district court on remand.” Hulu at 3. because the District Court has entered judgment determining all challenged claims of the ’678 and ’237 patents invalid under 35 U.S.C. § 101. Discretionary denial in the circumstances of this proceeding promotes administrative efficiency and the integrity of the patent system. Discretionary denial also preserves Petitioner’s ability to assert the same obviousness challenges, should the need arise, in the District Court litigation.” slip op. at 10
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied
“I. CONCLUSION For the reasons given above, we deny the Petitions in the 130 and 133 IPRs. Therefore, we do not institute inter partes review. II. ORDER In consideration of the foregoing, it is hereby ORDERED that the Petitions in IPR2025-00130 and IPR2025-00133 are denied, and inter partes review is not instituted.” slip op. at 15
Discretionary denialPatents in suitUS 11,488,237
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.