• Aroma360, LLC v. Air Esscentials, Inc.Some claims unpatentable
  PTAB · Oct 6, 2026 · IPR2025-00707 · APJ Eric C Jeschke · IPR · Final written decision

  Claim 5 is unpatentable over Gao-2 and over Gao-2 with Goubet; claims 1, 3, 4, and 6–8 were not shown unpatentable on any ground, and substitute claim 17 was denied.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “As noted in the Decision on Institution, Petitioner’s proposed definition appears generally consistent with the record, including the prior art. See Dec. Inst. 8 (citing In re GPAC Inc., 57 F.3d at 1579). We remove the phrase “at least” in both listed options, however, as that phrase adds ambiguity. Further, Patent Owner has not argued at trial that Petitioner’s proposal for the level of ordinary skill leads to an improper understanding of how a skilled artisan would have understood either the challenged patent or the prior art. In the analysis below, we continue to apply the level of ordinary skill in the art adopted in the Decision on Institution, as proposed by Petitioner.” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Neither Petitioner nor Patent Owner propose explicit constructions for any claim terms. Pet. 16–17; PO Resp. 5–6. Based on the complete record, we need not construe explicitly any claim terms because doing so would not change the outcome of the analysis below. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 10

  • Expert testimonyPetitioner expert creditedDecided for patent owner

    “As an initial matter, the record here does not support any sound basis to disregard the entirety of Dr. Micklow’s Declaration for allegedly not reviewing the parties’ claim constructions. See Pet. Reply 2–3 (citing Ex. 1046, 115:15–18). Contrary to Petitioner’s argument, in the cited 11 This refers to the recitation in clauses 1F and 5F that the “diffusion assembly is disposed between said upper chamber and said lower chamber.” discussion, Dr. Micklow does not indicate that he applied an incorrect understanding of a claim term. Cf. Cordis Corp. v. Bos. Sci. Corp., 658 F.3d 1347, 1357–58 (Fed. Cir. 2011) (disregarding testimony “based on an incorrect understanding of the claim construction”), cited at Pet. Reply 1; see also Pet. Reply 3 (arguing that “Dr. Micklow’s opinion that the prior art does not render the claims obvious is premised on an interpretation of certain claim limitations that are inconsistent with both parties’ constructions” (emphasis added)). Instead, we read Dr. Micklow’s testimony as clarifying that he was not involved in claim construction at all and that, as stated, he “made [his] opinions based on what [he] read in the patents.” Ex. 1046, 112:11–12; see also id. at 115:15–18 (“I don’t know if I would even apply claim construction. I applied engineering principles to a document that had been published with the patent office.”).” slip op. at 12

  • BurdenNot shown unpatentable

    “referring to the same direction as the separation of the “upper chamber” and “lower chamber” (vertically in both Figure 6 of the challenged patent and Figure 1 of Goubet), we turn back now to Petitioner’s discussion of clause 1F, which includes the limitation at issue. There, Petitioner does not discuss why the “diffusion assembly” is allegedly “disposed between” the “upper chamber” and “lower chamber,” but instead, Petitioner discusses why a component of the “diffusion assembly”—the “atomizer assembly”—is allegedly “disposed between” the “upper chamber” and “lower chamber”: Pet. 39. In the end, we need not assess whether the “atomizer assembly” identified by Petitioner is “disposed between” the “upper chamber” and “lower chamber” under the proper construction of that term (which, again, we need not and do not determine here) because the “disposed between” limitation does not involve the “atomizer assembly.” Instead, we find that, by failing to address why the identified “diffusion assembly” is “disposed between” the identified “upper chamber” and “lower chamber,” Petitioner has failed to provide persuasive evidence that Goubet discloses or suggests the “disposed between” limitation. Pet. 38–39 (discussing the claim language “said diffusion assembly is disposed between said upper chamber and said lower chamber” but only discussing the location of the “atomizer assembly”); see 35 U.S.C. § 316(e) (“In an inter partes review . . . , the petitioner shall have the burden of proving a proposition of unpatentability by a preponderance of the evidence.”). For the reasons above, we find, based on the complete record, that Petitioner has not shown by a preponderance of the evidence that Goubet discloses or suggests the “disposed between” limitation.” slip op. at 22

  Patent outcomesUS 10,092,918 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR
  Patents in suitUS 10,092,918
• Uatp IP LLC v. Slick Slide LLCSome claims unpatentable
  PTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision

  Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

    “1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20

  Patent outcomesUS 11,998,854 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
  Patents in suitUS 11,998,854
• Trove Brands, LLC v. Camelbak Products, LLCSome claims unpatentable
  PTAB · Jun 2, 2026 · IPR2025-00140 · APJ Carl M Defranco · IPR · Final written decision

  Claims 1–6 are unpatentable as obvious; claims 7–18 were not shown unpatentable because Ribarits does not disclose a mouthpiece disposed on the pivotal mount.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Trove contends that a person of ordinary skill in the art “would have had an undergraduate degree in mechanical engineering or equivalent coursework, and a year or more of experience in designing, prototyping, and/or manufacturing fluid containers or similar products” and that “[m]ore work experience may substitute for a lower level of education, and vice versa.” Pet. 15 (citing Ex. 1002 ¶ 25). While CamelBak offers “a similar, though slightly different level,” it nonetheless “discerns no material difference between the definitions provided by the parties for purposes of the Board’s decision in this proceeding.” PO Resp. 27. That being the case, we adopt Trove’s proposed definition of the level of skill in the art, as it is 2 JP 2002-211613A, published July 31, 2002 (Ex. 1004, “Nakajima”). 3 WO 2004/063042 A2, published July 29, 2004 (Ex. 1006, “Ribarits”). 4 US 4,485,963, issued Dec. 4, 1984 (Ex. 1007, “Panicci”). 5 US 6,523,711 B1, issued Feb. 25, 2003 (Ex. 1008, “Hughes”). reasonable and consistent with what is reflected in the asserted prior art and the specification of the ’250 patent. B. Claim Construction” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “We will not bite. CamelBak’s original assertion—that the plain and ordinary meaning of the constituent parts of “mouth” and “piece” is “a piece (or part) that goes in the mouth”—underscores the fallacy of CamelBak’s additional physical contact requirement. PO Resp. 28 (emphasis added). Indeed, in support of that earlier assertion, CamelBak pointed to the very dictionary definition that we relied on at institution in construing “mouthpiece” as a part that either “goes in the mouth or to which the mouth is applied.” See id. at 31 (citing Ex. 2005 (emphasis added)). Even the original testimony of CamelBak’s own expert confirms that one skilled in the art “would understand that the term ‘mouthpiece’ is commonly known in the art as a part designed for a user’s mouth,” without any requirement for physical contact with the mouth. Ex. 2016 ¶ 58 (citing Ex. 2005) (emphasis added)). And nothing in the Specification limits that common understanding. Although, indisputably, the Specification contemplates an embodiment where the user physically contacts the mouthpiece with their teeth (i.e., a bite-actuated mouthpiece), it also contemplates an embodiment where the user simply inserts the bottle in their mouth and commences fluid flow by squeezing it. See Ex. 1001, 10:9–13. That disclosure supports a meaning of “mouthpiece” that simply requires placement in the opening of the user’s mouth without necessarily incurring physical contact with some portion of the mouth, such as the teeth, tongue, or lips. Indeed, had CamelBak wished to premise the meaning of “mouthpiece” on some sort of physical contact with the mouth, it knew how to do so. For instance, the independent claims of CamelBak’s earlier ’255 patent, which is the subject of the related 1137 IPR, are limited in just such a manner, as they recite “wherein the resilient mouthpiece is adapted to resiliently compress responsive to compressive forces applied to the resilient mouthpiece by a user’s teeth.” Ex. 2023, at 20–25 (emphasis added). Thus, we reject CamelBak’s attempt to narrow our construction of “mouthpiece” to something other than “a part (as of an instrument) that goes in the mouth or to which the mouth is applied.” Neither the intrinsic nor extrinsic evidence supports the narrower construction proposed by CamelBak.” slip op. at 11

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “In reply, Trove argues that CamelBak’s “novel” construction that the mouthpiece moves with rotational motion about that same axis of rotation defined by the two joint as the pivotal mount and in the same direction as the pivotal mount “are inconsistent with the claim language’s plain and ordinary meaning and find no support in the intrinsic and extrinsic record.” See Pet. Reply 16. But, because we find that, when properly construed, the claimed “pivotal movement with the pivotal mount” about “two joints that define a pivotal axis” requires that the mouthpiece rotate about the same axis and in the same direction as the pivotal mount, we reject Trove’s argument as unavailing. And, although we agree with Trove that Nakajima’s mouthpiece engages in counter-clockwise rotation about a “Second Pivot Axis” when Nakajima’s lid 4 is opened (id. at 20–22), that rotation is about a different axis—one defined by Nakajima’s protrusions 24 rather than the claimed “pivotal axis” defined by Nakajima’s hinge shafts 19—and in a different manner—an upward and counterclockwise path rather than the claimed “pivotal movement with the pivotal mount” defined by Nakajima’s lid 4. Finally, in an alternative theory, Trove and its expert use “image- manipulation tools” in an attempt to show that Nakajima’s mouthpiece engages in some initial “clockwise-rotation” with Nakajima’s lid as it is opened. See Pet. Reply 18–24. We reject that theory as entirely conjectural and unsupported by the evidence.” slip op. at 39

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableNot shown unpatentable

    “We disagree. As discussed above, the proper construction of “for pivotal movement with the pivotal mount” requires that the mouthpiece mirror the rotational movement of the pivotal mount, i.e., rotate about the same axis as the pivotal mount and in the same direction as the pivotal mount. See supra § II.B.3. But Nakajima’s mouthpiece does neither, and, thus, does not exhibit the claimed “pivotal movement with the pivotal mount” about “two joints that define a pivotal axis for . . . the pivotal mount axis,” as properly construed.” slip op. at 36

  Patent outcomesUS 11,851,250 mixed
  Claim construction§ 103 obviousness
  Patents in suitUS 11,851,250
• Weatherford U.S., L.P v. Halliburton Energy Services, Inc.Some claims unpatentable
  PTAB · Dec 9, 2025 · IPR2024-00990 · APJ Brent M Dougal · IPR · Final written decision

  Claims 11–12 and 14–20 are unpatentable; claims 1–10 and 21–23 are not shown unpatentable. Substitute claims 29–37 are unpatentable, and the motion to amend is denied as to them.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The level of skill is uncontested. Patent Owner adopts the level of skill identified by Petitioner as: [at] the time of the alleged invention in 2018, a POSITA[2] would have had a B.S. degree in mechanical or petroleum engineering or a similar technical discipline, with at least five years of experience in oil or gas well drilling, completion, and/or subsurface production operations or in technical support of such operations including at least some experience in unconsolidated formations utilizing sand control methods and means. Also,” slip op. at 8

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed

    “on embodiments of Yeh with concentric sand screens having nine shunt tubes (six transport tubes and three packing tubes) (Yeh Figures 4A–B) and eccentric sand screens with four shunt tubes (two transport tubes and two packing tubes) (Yeh Figures 8A, 8C). See Pet. 32–37, 39, 41–43. Yet, Petitioner’s reasoning as to why “a higher-pressure shunt tube assembly necessitated greater wall thickness” rests on an unspoken one to one comparison between the shunt tubes of the different systems. See id.; see also Ex. 1003 ¶¶ 291–297 (Petitioner’s declarant comparing possible transport tubes of different pressure regions without considering or addressing any difference in the number of transport tubes). However, the embodiments relied on by Petitioner have different numbers of shunt tubes, and thus the greater wall thickness does not appear to be “necessitated” in the way inferred by Petitioner. Further, Petitioner’s analysis would seem to be most appropriate when comparing two concentric sand screens for different pressure regions, or two eccentric sand screens for different pressure regions. relies on Yeh’s teachings related to a horizontal well bore of 5000 feet for the “concentric screen → crossover tool → eccentric screen” arrangement, as well as, for why the concentric screen needs to be rated for a high pressure. Pet. 32–37, 39, 41–43. Petitioner also refers to these features for why one of skill in the art would combine the teachings of Yeh and Yeh2. Id. at 32. However, on cross-examination, Petitioner’s declarant agreed that it is concentric sand screens having a 6x3 shunt tube design that would provide the noted benefits of being rated for a higher pressure and being more robust (as relied on in the Petition), as compared to eccentric sand screens. Ex. 2013, 42:20–43:8; Sur-reply 4–5. This also exposes another issue with Petitioner’s arguments. Though Petitioner identifies that one of skill in the art would be aware that material choice, wall thickness, and pipe diameter all impact burst pressure of a pipe (Pet. 42 (citing Ex. 1017, 24 (Equation (14))), the Petition essentially ignores the fact that the claims do not require a single pipe in isolation. The claims require two shunt tube assemblies, each surrounding a base pipe within a wellbore. It is uncontested that a wellbore provides a confined space for such a system and thus any change in wall thickness of one pipe can result in a significant impact in the function of the other pipes. We find the testimony of Petitioner’s declarant (see, e.g., Ex. 1003 ¶¶ 290–297) unpersuasive when discussing wall thickness because it focusses on basic considerations of a standalone pipe, without sufficient consideration of the claimed completion assembly with its required pipe and tube structure. PO Resp. 20–26.” slip op. at 17

  • Strike new argumentNew argument disregardedDecided for patent owner

    “In response to Patent Owner’s argument concerning Yeh’s embodiments relied on in the Petition, Petitioner argues for the first time that Patent Owner’s declarant “conceded, Yeh discloses that both concentric and 47:19–48:21). Petitioner does not provide a citation to Yeh or a citation to where the Petition relies on the same number of shunt tubes between concentric and eccentric screens. The deposition cited by Petitioner discusses Yeh at column 16, lines 26 through 35. However, the Petition does not cite or rely on these teachings of Yeh. Thus, we decline to consider this late argument.4 See 35 U.S.C. § 312(a)(3) (requiring the petition to identify “with particularity . . . the grounds on which the challenge to each claim is based, and the evidence that supports the grounds”); 37 C.F.R. § 42.104(b)(5).” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable

    “Thus, we agree with Petitioner that the combination of Yeh and Yeh2 teaches determining the shunt tube system operating pressures associated with the distal end of the production zone, but also more generally, determining the operating pressures along the entire production zone. With this knowledge of the system operating pressures, Petitioner argues that one of skill in the art would have selected eccentric screens for the distal end of the production zone “at any point at which the slurry pressure dropped below the pressure capacity of the eccentric screen shunt tubes.” Pet. 66 (citing Ex. 1005, 30:16–20; Ex. 1003 ¶ 388). In other words, knowing that the pressure decreases as you approach the toe, Yeh’s low-pressure rated eccentric screens could be used from some point prior to and covering the toe. determined pressure.” PO Resp. 37–38. We disagree. As discussed above, the record supports Petitioner’s position that one of skill in the art would have “understood the need to determine the shunt tube system operating pressure throughout the horizontal wellbore.” Ex. 1003 ¶ 383; see also Pet. 64–65. We find convincing Petitioner’s argument that one of skill with this understanding of the system pressures would select a shunt tube system rated to not only address the distal end, but also to address the needs of the adjacent region, so long as the pressure rating supported such a selection. See Pet. 65–67; Ex. 1003 ¶¶ 385–388.” slip op. at 22

  Patent outcomesUS 11,333,007 mixed
  Claim construction§ 101 eligibility§ 103 obviousness§ 112 disclosurecites Graham
  Patents in suitUS 11,333,007
• Lululemon USA Inc. v. Nike, Inc.Some claims unpatentable
  PTAB · May 21, 2025 · IPR2024-00159 · APJ Carl M Defranco · IPR · Final written decision

  Claims 8, 9, 14, 15, and 19 are unpatentable over Minami; claims 1–3, 7, 16–18, and 20 were not shown unpatentable over Good or Munsing.

  RulingsFinal written decision

  • Skill levelSkill level board ownOther

    “lululemon contends, and Nike does not dispute, that a person skilled in the art in the relevant time frame would have had “at least a bachelor’s degree in mechanical engineering, textile engineering, or similar technical degree and at least 3 years of experience working with knitted textiles for use in fabric-based articles, including apparel such as footwear” and such person’s “additional experience compensates for any differences in that person’s education as stated above.” Pet. 13–14 (citing Ex.1003 ¶¶ 33–35); see also PO Resp. 14 (“For purposes of this proceeding, Nike applies lululemon’s proposed level of skill in the art.”). We find that lululemon’s proposed definition is consistent with the problems and solutions described in the ’046 patent and the prior art of record. Thus, we adopt the parties’ agreed-upon definition of the level of skill in the art.” slip op. at 6

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “We are not persuaded by lululemon’s attempt to equate the term “channel” in that passage with an open-periphery configuration. Nowhere does that passage indicate that the “channel” has an open-periphery. Instead, lululemon merely presumes, without support, that channels are open-periphery structures. More accurately, the terms “tunnel” and “channel” in the passage cited by lululemon are used synonymously. That is made clear by the overall context of the ’046 patent at issue, which is directed to how tubular rib structures 126 are formed by “first” and “second” curved portions 416 and 418 that are “knitted together” to define “hollow tube 112.” See Ex. 1001, 10:16–11:14, Figs. 4, 5 (emphasis added). In particular, the sentence cited by lululemon describes hollow tube 112 as being “disposed between” first and second curved portions 416 and 418, which Figures 4 and 5 of the ’046 patent clearly depict in a closed-periphery configuration. See id. at 10:66–11:3, Figs. 4, 5. Moreover, the very next sentence expressly describes that hollow tube 112 has “a generally cylindrical or elliptical shape” wherein “[t]he diameter of one hollow tube and the diameter of other hollow tubes may differ in some embodiments.” Id. at 11:3–14 (emphases added). We are not aware of any open-periphery channels being described as having a cylindrical or elliptical shape, nor are we aware of such a channel being described as having a diameter. Thus, lululemon’s proposed claim construction ignores the context surrounding the ’046 patent’s description of the tubular rib structures when it describes them as having the configuration of a tunnel or channel.” slip op. at 10

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “We agree with Nike, given our construction of the claimed “tubular structures.” As shown in annotated Figures 1, 3, and 4 of Good (reproduced below), Good discloses a sock 12 having rib portions 22 (red) and webbed areas 24 (green). See PO Resp. 19. lululemon contends that Good’s rib portions 22 meet the claimed “tubular structures” because each rib portion 22 “roll[s] substantially together in the relaxed condition” and “has the shape of a tube, namely an elongate hollow structure.” Pet. 29–30. In support, lululemon points to Good’s Figure 3 (reproduced below center) as allegedly showing the tubular shape of Good’s rib portions 22. Id. at 30. Annotated Figure 3 is a vertical cross-section of rib portions 22 (red) shown in Good’s Figure 1. But, as Nike correctly notes, Good’s rib portions 22 are “C-shaped knitted portions,” which when stretched, go from an essentially C-shaped configuration (Figure 3) to a relatively flat, linear configuration (Figure 4). PO Resp. 19–20 (citing Ex. 2006 ¶¶ 48–49). Nowhere does Good disclose that the ends of C-shaped rib portions 22 ever meet and remain in a closed periphery configuration to form a hollow tube per our construction of “tubular structures” (as discussed above in Section II.B). In at least this way, Good’s C-shaped rib portions 22 differ from the claimed “tubular structures.”7 Thus, we find that Good does not disclose or otherwise suggest the claimed “tubular structures,” as properly construed, meaning that lululemon fails to demonstrate, by a preponderance of the evidence, that Good either anticipates claims 1–3, 7, 16–18, and 20, or, alternatively, renders obvious claim 3.” slip op. at 16

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “In our Institution Decision, we said that Munsing lacks the claimed “tubular structures” because “nowhere does Munsing indicate that the rows of stitches or loops form a rib that is tubular-like, let alone one with a closed periphery.” Inst. Dec. 10–12. During the trial phase, lululemon’s expert likewise agreed, conceding (on cross-examination) that Munsing only discloses non-tubular structures. See Ex. 2007, 40:9–41:11 (“Q [by Patent Owner’s counsel]: So you agree that . . . Munsing only discloses a nontubular rib? A [by lululemon’s expert]: That’s what I said.”). Nowhere does lululemon rebut that admission by its own expert, despite Nike noting it explicitly as a reason for rejecting Ground 2. Compare PO Resp. 25–26 (noting the admission of lululemon’s expert), with Pet. Reply 1–26 (addressing only Grounds 1 and 3, while omitting any mention of Ground 2, which is based on Munsing). Nor does lululemon ever dispute the preliminary findings in our Institution Decision as to why Munsing is not an anticipatory reference. Compare Inst. Dec. 10–12, with Pet. Reply 1–22. Thus, lululemon fails to demonstrate, by a preponderance of the evidence, that Munsing anticipates challenged claims 1–3, 7, 17, 18, and 20.” slip op. at 18

  Patent outcomesUS 9,375,046 mixed
  Claim construction§ 102 anticipation§ 103 obviousness
  Patents in suitUS 9,375,046
• LG Electronics, Inc. / LG Electronics U.S.A., Inc. et al. v. Multimedia Technologies Pte. Ltd.Some claims unpatentable
  PTAB · May 19, 2025 · IPR2024-00699 · APJ St John Courtenay III · IPR · Final written decision

  Claims 1, 2, 6–11, and 14–18 are unpatentable under § 103; claims 3–5, 12, and 13 were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “contends that an ordinarily skilled artisan for the ’805 patent “would have been someone knowledgeable about and familiar with the television display technology that is pertinent to the ’805 patent. A POSITA would have had a bachelor’s degree in Electrical Engineering, Software Engineering, or Computer Engineering, or equivalent training, and approximately two years of experience working in the field of television systems and networking, human-computer interaction, or related technologies. Lack of work experience can be remedied by additional education, and vice versa.” Pet. 9 (citing Ex. 1003 ¶¶ 18–20). In its Preliminary Response Patent Owner indicated it “adopts Petitioner’s definition of a person of ordinary skill in the art (‘POSITA’) for the purposes of [its] Preliminary Response.” Prelim. Resp. 28. We note Patent Owner does not dispute or otherwise disavow Petitioner’s definition of a POSITA in its Response or Sur-reply. See generally PO Resp.; PO Surreply. level of ordinary skill in the art. On the present record, we are satisfied that this definition comports with the level of skill necessary to understand and implement the teachings of the ’805 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that the prior art itself can reflect appropriate level of ordinary skill in art).” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “We disagree with Patent Owner. Id. We see nothing in the preamble 1.0, or “receiving” step 1.1.1, or “wherein” clause 1.1.2 that defines a data format prior to organizing step 1.2.1, and we decline to read limitations from the specification into the claim, i.e., a “pre-defined format” being defined prior to organizing step 1.2.1, as argued by Patent Owner. 5 PO Resp. 20. Preamble 1.0 is silent regarding any mention of a data format: “A method of providing content for a television (TV), the method comprising: . . . .” Although step 1.1.1 requires “receiving, by a processor, data relevant to one or more scheduled events from one of a corresponding subservice of a plurality of subservices,” at best this merely requires a type of data that is “relevant to one or more scheduled events” and does not require a particular data format to be used for “data relevant to one or more scheduled events,” nor the “pre-defined” format argued by Patent Owner. PO Resp. 20–21. (emphases added). Nor do we read step 1.1.2 as defining a particular data format used by the three recited types of subservices: “[1.1.2] wherein the plurality of subservices comprises a video-on-demand (VOD) subservice, electronic programming guide (EPG) subservice, and a media subservice.” 5 We emphasize that patentability is based upon the claims. “It is the claims that measure the invention.” SRI Int’l v. Matsushita Elec. Corp. of America, 775 F.2d 1107, 1121 (Fed. Cir. 1985) (en banc). A basic canon of claim construction is that one may not read a limitation into a claim from the written description. Renishaw PLC v. Marposs Societa' per Azioni, 158 F.3d 1243, 1248 (Fed. Cir. 1998). according to a pre-defined format corresponding to each of the plurality of subservices.” (emphases added). However, we find Patent Owner’s contention unavailing that the term “pre-defined format” recited in step 1.2.1 requires three different data model pre-defined formats because claim 1 is silent regarding the argued term “different.” See PO Sur-reply 9 (regarding Patent Owner’s response to the question of “whether element [1.2.1] and the term ‘pre-defined format’ requires three different data models.” Patent Owner responds: “For the above reasons, they do.”). Moreover, we note the term “data model” is not introduced until subsequent “wherein” clause 1.2.2, which merely requires that “the predefined format comprises one of a VOD data model, an EPG data model and a media data model.” (emphasis added).” slip op. at 20

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner

    “Regarding the claim 1 term “uniform format” Petitioner replies that Patent Owner “does not dispute that the prior art teaches a ‘uniform format’” in step 1.2.4. Pet. Reply 8 (citing generally PO Resp.). Therefore, Petitioner argues “for the purposes of this proceeding, the term “uniform format” does not require express construction.” Pet. Reply 8 (citing Nidec (Fed. Cir. 2017)). Nevertheless, at the Board’s request (Dec. 29), Petitioner proceeds to address the scope of the claim 1 term “uniform format.” Pet. Reply 8. Petitioner notes that the ’805 patent uses the term “uniform format” in column 33: “The data models provide uniform formats for the respective subservices (i.e., VOD subservice 1420, EPG subservice 1424, and media subservice 1428) and/or the internal content provider modules 1416 which interface with applications 416.” Pet. Reply 8 (quoting Ex.1001, 33:25–30). Petitioner further notes that Dr. Lippmann explains, “the ’805 patent does not appear to ascribe any specific meaning to the term ‘uniform format’ and the passage does not limit the scope of this term to require a plurality of uniform formats.” Pet. Reply (quoting Ex. 1020 ¶ 13).” slip op. at 22

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityReference is prior artDecided for petitioner

    “Patent Owner’s arguments are not persuasive because on January 14, 2025, the Federal Circuit in Lynk Labs Inc. v. Samsung Electronics Co. Ltd., (125 F.4th 1120, 1132 (Fed. Cir. 2025)) held that Title 35 U.S.C. sections “311(b) and 102(e)(1) permit IPR challenges based upon published patent applications, and such published patent applications can be deemed prior art in IPRs as of their filing date.” (emphasis added). Accordingly, we conclude both Melnychenko and Choi are prior art for the purpose of this IPR pursuant to 35 U.S.C. § 311(b) under the holding of Lynk Labs.” slip op. at 6

  Patent outcomesUS 10,419,805 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,419,805
• LG Electronics, Inc. / LG Electronics U.S.A., Inc. et al. v. Multimedia Technologies Pte. Ltd.Some claims unpatentable
  PTAB · May 19, 2025 · IPR2024-00354 · APJ St John Courtenay III · IPR · Final written decision

  Claims 1, 2, 6–11, and 14–18 are unpatentable as obvious; claims 3–5, 12, and 13 were not shown unpatentable.

  RulingsFinal written decision

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityReference is prior artDecided for petitioner

    “Patent Owner’s arguments are not persuasive because on January 14, 2025, the Federal Circuit in Lynk Labs Inc. v. Samsung Electronics Co. Ltd., (125 F.4th 1120, 1132 (Fed. Cir. 2025)) held that Title 35 U.S.C. sections “311(b) and 102(e)(1) permit IPR challenges based upon published patent applications, and such published patent applications can be deemed prior art in IPRs as of their filing date.” (emphasis added). Accordingly, we conclude both Melnychenko and Choi are prior art for the purpose of this IPR pursuant to 35 U.S.C. § 311(b) under the holding of Lynk Labs.” slip op. at 6

  • Skill levelSkill level petitioner adoptedDecided for patent owner

    “Relying upon the declaration testimony of Dr. Lippman, Petitioner contends that an ordinarily skilled artisan for the ’805 patent “would have been someone knowledgeable about and familiar with the television display technology that is pertinent to the ’805 patent. A POSITA would have had a bachelor’s degree in Electrical Engineering, Software Engineering, or Computer Engineering, or equivalent training, and approximately two years of experience working in the field of television systems and networking, human-computer interaction, or related technologies. Lack of work experience can be remedied by additional education, and vice versa.” Pet. 9 (citing Ex. 1003 ¶¶ 18–20). In its Preliminary Response Patent Owner indicated it “adopts Petitioner’s definition of a person of ordinary skill in the art (‘POSITA’) for the purposes of [its] Preliminary Response.” Prelim. Resp. 28. We note Patent Owner does not dispute or otherwise disavow Petitioner’s definition of a POSITA in its Response or Sur-reply. See generally PO Resp.; PO Surreply. level of ordinary skill in the art. On the present record, we are satisfied that this definition comports with the level of skill necessary to understand and implement the teachings of the ’805 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that the prior art itself can reflect appropriate level of ordinary skill in art).” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “We disagree with Patent Owner. Id. We see nothing in the preamble 1.0, or “receiving” step 1.1.1, or “wherein” clause 1.1.2 that defines a data format prior to organizing step 1.2.1, and we decline to read limitations from the specification into the claim, i.e., a “pre-defined format” being defined prior to organizing step 1.2.1, as argued by Patent Owner. 5 PO Resp. 20. Preamble 1.0 is silent regarding any mention of a data format: “A method of providing content for a television (TV), the method comprising: . . . .” Although step 1.1.1 requires “receiving, by a processor, data relevant to one or more scheduled events from one of a corresponding subservice of a plurality of subservices,” at best this merely requires a type of data that is “relevant to one or more scheduled events” and does not require a particular data format to be used for “data relevant to one or more scheduled events,” nor the “pre-defined” format argued by Patent Owner. PO Resp. 20–21. (emphases added). Nor do we read step 1.1.2 as defining a particular data format used by the three recited types of subservices: “[1.1.2] wherein the plurality of subservices comprises a video-on-demand (VOD) subservice, electronic programming guide (EPG) subservice, and a media subservice.” 5 We emphasize that patentability is based upon the claims. “It is the claims that measure the invention.” SRI Int’l v. Matsushita Elec. Corp. of America, 775 F.2d 1107, 1121 (Fed. Cir. 1985) (en banc). A basic canon of claim construction is that one may not read a limitation into a claim from the written description. Renishaw PLC v. Marposs Societa' per Azioni, 158 F.3d 1243, 1248 (Fed. Cir. 1998). according to a pre-defined format corresponding to each of the plurality of subservices.” (emphases added). However, we find Patent Owner’s contention unavailing that the term “pre-defined format” recited in step 1.2.1 requires three different data model pre-defined formats because claim 1 is silent regarding the argued term “different.” See PO Sur-reply 9 (regarding Patent Owner’s response to the question of “whether element [1.2.1] and the term ‘pre-defined format’ requires three different data models.” Patent Owner responds: “For the above reasons, they do.”). Moreover, we note the term “data model” is not introduced until subsequent “wherein” clause 1.2.2, which merely requires that “the predefined format comprises one of a VOD data model, an EPG data model and a media data model.” (emphasis added).” slip op. at 20

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner

    “Regarding the claim 1 term “uniform format” Petitioner replies that Patent Owner “does not dispute that the prior art teaches a ‘uniform format’” in step 1.2.4. Pet. Reply 8 (citing generally PO Resp.). Therefore, Petitioner argues “for the purposes of this proceeding, the term “uniform format” does not require express construction.” Pet. Reply 8 (citing Nidec (Fed. Cir. 2017)). Nevertheless, at the Board’s request (Dec. 29), Petitioner proceeds to address the scope of the claim 1 term “uniform format.” Pet. Reply 8. Petitioner notes that the ’805 patent uses the term “uniform format” in column 33: “The data models provide uniform formats for the respective subservices (i.e., VOD subservice 1420, EPG subservice 1424, and media subservice 1428) and/or the internal content provider modules 1416 which interface with applications 416.” Pet. Reply 8 (quoting Ex.1001, 33:25–30). Petitioner further notes that Dr. Lippmann explains, “the ’805 patent does not appear to ascribe any specific meaning to the term ‘uniform format’ and the passage does not limit the scope of this term to require a plurality of uniform formats.” Pet. Reply (quoting Ex. 1020 ¶ 13). In its Sur-reply, Patent Owner notes that “Petitioners do not appear to” slip op. at 22

  Patent outcomesUS 10,419,805 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,419,805
• LG Electronics, Inc. / LG Electronics U.S.A., Inc. et al. v. Multimedia Technologies Pte. Ltd.Some claims unpatentable
  PTAB · May 19, 2025 · IPR2024-00694 · APJ Robert L Kinder · IPR · Final written decision

  Claims 1, 4–6, 11, 14–16, 21, and 22 are unpatentable over the stated obviousness grounds; claims 2, 3, 12, and 13 were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Based on the final record before us, we determine the knowledge level of a person of ordinary skill in the art. Relying on the testimony of Dr. Lippman, LG argues the following: [a] Person of Ordinary Skill in The Art . . . in August of 2012 would have been someone knowledgeable and familiar with the interactive media guide arts that are pertinent to the ’040 patent. A [person of ordinary skill in the art] would have had a bachelor’s degree in Electrical Engineering, Software Engineering, or Computer Engineering, or equivalent training, and approximately two years of experience working in the field of television systems and networking, human-computer interaction, or related technologies. Lack of professional experience can be remedied by additional education, and vice versa.” slip op. at 13

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityReference is prior artPrinted publication establishedDecided for petitioner

    “under 35 U.S.C. § 311(b) because they were not published before the ’040 patent’s priority date of August 17, 2012. PO Resp. 13–14. Multimedia referenced a case pending at the Federal Circuit, Lynk Labs, Inc. v. Samsung Electronics Co., Ltd., as pertinent to addressing whether applications for patent published after the priority date of the challenged patent are permissible “printed publications” in IPRs. Id. Multimedia’s arguments are not persuasive because on January 14, 2025, the Federal Circuit in Lynk Labs Inc. v. Samsung Electronics Co. Ltd., clarified that inter partes review challenges may be based upon published patent applications, and such published patent applications can be deemed prior art in IPRs as of their filing date. 125 F.4th 1120, 1127 (Fed. Cir. 2025). As such, both Choi and Kim are prior art pursuant to 35 U.S.C. § 311(b).” slip op. at 16

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “Turning to rationale to combine, LG contends that it would have been obvious to a person of ordinary skill in the art to implement Kim’s EXTERNAL DEVICE card object 1380 to include Choi’s specific symbols representing external devices connected to the input ports of smart TV 100 to inform the user which external devices are actually connected to the smart TV versus those that are not connected. Pet. 42–44 (citing Ex. 1005, Fig. 19 (modifying card object 1380); Ex. 1003 ¶ 137); see also id. at 14 (arguing the same). LG argues this proposed combination is merely combining prior art elements (i.e., Choi’s specific symbols representing external devices connected via input ports, with Kim’s EXTERNAL DEVICE card object 1380) according to known methods to yield the predictable result of “informing the user which external device is connected to an input port.” Id. at 45; see also id. at 14–15 (arguing the same). LG also argues that this proposed combination represents the use of a known technique (i.e., Choi’s specific symbols representing external devices connected via input ports) to improve a similar device (i.e., Kim’s smart TV 100) in the same way (i.e., “to inform the user which external device is connected to an input port”). See id. at 45 (citing Ex. 1003 ¶ 130); see also id. at 15 (arguing the same). LG asserts that there would have been a reasonable expectation of success in making this proposed combination because both Kim and Choi disclose “similar televisions” with “external devices connected via an input port,” and implementing Kim with Choi’s thumbnail icons that have specific symbols representing input ports would have been “a matter of routine software programming.” Id. at 15 (citing Ex. 1003 ¶ 61).” slip op. at 22

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation not foundDecided for patent owner

    “Limitation [2.1] requires identifying a user associated with the “received indication,” which is the selection of a home key button or go-tohome button to invoke the home screen, as alleged by LG. See Pet. Reply 20–21. Both Kim and Lee-2 allow a distinct procedure wherein a user can login, but LG has not explained persuasively how these distinct procedures are associated with Kim’s home key button such that a user is identified through its selection. For example, Lee-2’s Favorite Channel List (Figure 39B) is displayed based on the user’s selection of the favorite channel object 2019 on a home screen, but not related to the user’s selection of the home key button to invoke the home screen. See Ex. 1010, 41:41–43 (“Referring to FIG. 39B, upon selection of the favorite channel object 2019 [in FIG. 39A], a favorite channel list screen including a favorite channel list is displayed fullscreen.”).” slip op. at 62

  Patent outcomesUS 9,510,040 mixed
  § 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 9,510,040
• LG Electronics, Inc. / LG Electronics U.S.A., Inc. et al. v. Multimedia Technologies Pte. Ltd.Some claims unpatentable
  PTAB · May 19, 2025 · IPR2024-00351 · APJ Robert L Kinder · IPR · Final written decision

  Claims 1, 4–6, 11, 14–16, 21, and 22 are unpatentable as obvious; claims 2, 3, 12, and 13 were not shown unpatentable.

  RulingsFinal written decision

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityReference is prior artDecided for petitioner

    “6. Whether Choi and Kim Are Printed Publications Pursuant to 35 U.S.C. § 311(b) Multimedia contends that Choi and Kim are not printed publications under 35 U.S.C. § 311(b) because they were not published before the ’040 patent’s priority date of August 17, 2012. PO Resp. 13–14. Multimedia referenced a case pending at the Federal Circuit, Lynk Labs, Inc. v. Samsung Electronics Co., Ltd., as pertinent to addressing whether applications for patent published after the priority date of the challenged patent are permissible “printed publications” in IPRs. Id. Multimedia’s arguments are not persuasive because on January 14, 2025, the Federal Circuit in Lynk Labs Inc. v. Samsung Electronics Co. Ltd., clarified that inter partes review challenges may be based upon published patent applications, and such published patent applications can be deemed prior art in IPRs as of their filing date. 125 F.4th 1120, 1127 (Fed. Cir. 2025). As such, both Choi and Kim are prior art pursuant to 35 U.S.C. § 311(b).” slip op. at 15

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Based on the final record before us, we determine the knowledge level of a person of ordinary skill in the art. Relying on the testimony of Dr. Lippman, LG argues the following: [a] Person of Ordinary Skill in The Art . . . in August of 2012 would have been someone knowledgeable and familiar with the interactive media guide arts that are pertinent to the ’040 patent. A [person of ordinary skill in the art] would have had a bachelor’s degree in Electrical Engineering, Software Engineering, or Computer Engineering, or equivalent training, and approximately two years of experience working in the field of television systems and networking, human-computer interaction, or related technologies. Lack of professional experience can be remedied by additional education, and vice versa. Pet. 8–9 (citing Ex. 1003 ¶¶ 18–20). In its Response, “Patent Owner accepts the Petitioner’s definition of the POSITA” and Multimedia and its expert, Dr. Surati, “find that definition to be reasonable.” PO Resp. 7 (citing Ex. 2011 ¶¶ 43, 44). Accordingly, we adopt LG’s assessment of the level of skill in the art because it is consistent with the ’040 patent and the asserted prior art.” slip op. at 13

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner

    “Based on the final record, including the parties’ contention that no claim term requires express construction, there is no readily discernible controversy between the parties that requires us to construe any claim terms, and thus we do not construe any claim terms except as discussed below with respect to limitation 1.6. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner

    “highlighted when a user selects this content source in some manner. Ex. 1001, 30:27–51. At that juncture, after a user selects the content source and it is highlighted, the content source is then associated with the first content information, “801 – CNXN,” which is displayed on the right panel of Figure 15B. See id. We do not understand the ’040 patent as requiring the display “801 – CNXN” to cause the corresponding highlighting of Live TV 1504A as suggested by Multimedia. The claim language requires the two elements “being associated with”5 one another, but it does not require that one element’s display (first content information) causes the highlighting of the other element (content source). Our view is supported by the only description of highlighting a content source found in the specification of the ’040 patent. In regard to Figure 15B, the specification describes that “global panel 1404 may include one or more sources represented by icons and text, or shortcuts, 1504A-E.” Ex. 1001, 30:27–28. The specification describes how highlighting the source is user directed: Global panel 1404 may additionally indicate a source that is selected or highlight [sic] using indicator 1512; for example, indicator 1512 may comprise a box positioned around Live TV 5 As the Federal Circuit has explained, “the plain meaning of associating relates to a mere commonality.” Apple Inc. v. Motorola, Inc., 757 F.3d 1286, 1306 (Fed. Cir. 2014), overruled by Williamson v. Citrix Online, LLC, 792 F.3d 1339 (Fed. Cir. 2015) (on unrelated grounds). 801 CNXN. Although illustrated as a box, other methods or configurations which provide for icon selection and/or identification may be used. For example, instead of a box, indicator 1512 may comprise adjusting the background of an icon and text, such as 1504A for example, such that the color, shade, or hue is different. Id. at 30:41–49 (emphasis added). Highlighting, as the specification describes, occurs when a user selects a source using indicator 1512 and that source is boxed or differentiated by color or shading. Id. The specification, in relation to Figure 15C, further describes a user moving indicator 1512 to another source such that the “the content or a preview of the content may be displayed in active content area 1408.” Id. at 32:9–17 (“For example, FIG. 15C illustrates an image or video associated with Skyfalls being displayed in content area 1408.”). Thus, the specification is clear that the highlighting function results from user selection of the source and the corresponding association of the first content information with that source flows from that user selection. See also id. at 2:30–31 (describing a purpose of the ’040 patent as “an Intelligent TV with intuitive user interfaces and with seamless user interaction capability”), 32:35–43 (“[t]he user . . . move[s] the focus box”). This supports our understanding that the claim language does not require that the display of first content to cause the highlighting of a displayed source identifier.” slip op. at 29

  Patent outcomesUS 9,510,040 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 9,510,040
• Alivecor, Inc. v. Apple Inc.Some claims unpatentable
  PTAB · Jan 7, 2025 · IPR2023-00949 · APJ Scott A Daniels · IPR · Final written decision

  Claims 11–14 and 16–20 are unpatentable over Kim; claim 15 was not shown unpatentable over Chang.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner’s asserted level of ordinary skill in the art is essentially the same as Petitioner’s, for example requiring a bachelor’s degree in science or engineering and “at least two years of relevant work experience with capture and processing of data or information, including but not limited to physiological information.” Id.; Pet. 9. In view of the similarity, our record now before us, and as we did in our Institution Decision, we rely on Petitioner’s proposed level of ordinary skill in the art as it is essentially the same as that proposed by Patent Owner. Petitioner’s asserted level of ordinary skill in the art is consistent with our review and understanding of the technology and descriptions in the ’619 patent and the asserted prior art references. Okajima, 261 F.3d at 1355.” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “C. Claim Construction We interpret a claim “using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. 282(b).” 37 C.F.R. § 42.100(b) (2020). Under this standard, we construe the claim “in accordance with the ordinary and customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” Id. Furthermore, “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Neither Patent Owner nor Petitioner indicate that any claim terms require construction. See generally Petition; PO Resp. For purposes of this Decision where no claim terms are in dispute, we need not explicitly construe any claim terms.” slip op. at 11

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “What these cases and examples clearly articulate, is that whether there is sufficient description in an anticipation reference for linking different disclosures, elements, and embodiments, is particularly case and fact dependent. Moreover, a finding of anticipation resting upon a reference’s disclosures of elements in different embodiments turns on whether an ordinarily skilled artisan would understand that the reference suggests arranging the elements of the embodiments to one another in the same way as the challenged claims. For the reasons that follow, we determine that there is sufficient description and teaching in Kim such that the “combined button” disclosed by Kim, for example in Figure 10(b), can be the same “combined button” as discussed in the embodiment of Figure 18.” slip op. at 28

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “As to Patent Owner’s first and second arguments, as we discussed in detail above with respect to anticipation, we find that there is sufficient evidence in Kim itself of contextual and even express links between the various combined button embodiments and Figure 18. Section II.D.2.b)(1)– (4). We have already determined “that one of ordinary skill in the art would understand Kim to disclose the ‘combined button’ structure and function that could be implemented on the face or sidewall of a device.” Id. We likewise determine, based on the same evidence, that a person of ordinary skill in the art would have understood Kim to suggest that the combined button structure and function, for example in the embodiment of Figure 10(b), could be implemented in an opening on the face or sidewall of a device. Obviousness does not require an instruction manual on how to physically incorporate or combine the disclosures of two embodiments in a reference. As KSR informs us, “in many cases a person of ordinary skill will be able to fit the teachings of multiple patents together like pieces of a puzzle.” KSR, 550 U.S. at 420. Moreover, in this case we have only one prior art patent, Kim, so at least the pieces of the puzzle are all in the same box. The persuasive testimony of Dr. Berger that “a person of ordinary skill in the art would have been familiar with electronic devices with sealed and/or insulated button assemblies, and would understand that those assemblies were not limited to the front face of a device,” is unrebutted in this case. Ex. 1003 ¶ 110. “A person of ordinary skill is also a person of ordinary creativity, not an automaton.” KSR, 550 U.S. at 421. Given the background knowledge of a person of ordinary skill in the art in conjunction with the motivation and teachings in Kim itself for placing sufficient motivation to support the combination of Kim’s Figure 10(b) embodiment with the sidewall placement of the combined button taught in Figure 18 for obviousness purposes. It is well-settled that a single prior art obviousness reference itself can provide motivation for the combination. See General Elec. Co. v. Raytheon Techs. Corp., 983 F.3d 1334, 1352 (Fed. Cir. 2020) (Reversing the Board’s finding of nonobviousness over a single prior art reference, the Court explained that “the Board’s approach would require a motivation to combine each element of the claim—even those present together in a reference. This analysis unduly dissects prior art references into collections of individual elements, requiring a party showing obviousness to re-do the work already done in the prior art reference.”). Patent Owner’s third argument is unavailing because although Dr. Anthony testifies that “implementing the fingerprint sensor assembly of Kim’s Figure 10 embodiment in the ‘lateral surface’ of Kim’s Figure 18 embodiment would have complicated the manufacturing process for the resulting mobile device,” Dr. Anthony does not provide testimony or evidence that implementing the combined button on the sidewall would have been difficult or beyond the level of ordinary skill in the art. Ex. 2009 ¶ 73. We credit Dr. Berger who explains persuasively that “[p]rior to the ’619 patent’s earliest alleged priority date of June 19, 2017, a person of ordinary skill in the art would have known that a mobile electronic device could include one or more button assemblies in a sidewall.” Ex. 1003 ¶ 47 (citing Ex. 1013, 4:40, 19:42–20:4, Figs. 13B, 17, 19A, 19B). It is well-settled that a person of ordinary skill can use his or her ordinary skill, creativity, and common sense to make the necessary adjustments and further modifications to result in a properly functioning device. See KSR, 550 U.S. at 418 (“the specific subject matter of the challenged claim, for a court can take account of the inferences and creative steps that a person of ordinary skill in the art would employ.”).” slip op. at 43

  Patent outcomesUS 10,866,619 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,866,619

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.