• Uatp IP LLC v. Slick Slide LLCSome claims unpatentable
  PTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision

  Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

    “1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20

  Patent outcomesUS 11,998,854 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
  Patents in suitUS 11,998,854
• Innoscience America, Inc. v. Infineon Technologies Americas Corp.No claims unpatentable
  PTAB · Jun 30, 2026 · IPR2025-00175 · APJ Jo-Anne M Kokoski · IPR · Final written decision

  Claims 1–17 were not shown unpatentable because Petitioner failed to establish that Usui’s interconnect structure or Yu’s metal gate stacks satisfy the construed “electrode stack” limitation.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “(“POSITA” or “POSA”) would have had “at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design,” and “[a]dditional education could substitute for professional experience and vice versa.” Pet. 6 (citing Ex. 1002 ¶¶ 80–82). Patent Owner does not dispute Petitioner’s proposed level of ordinary skill. PO Resp. 1–76. Neither party explains why the outcome of this case would be affected by the adoption of the proffered definition of a person of ordinary skill in the art. In the Institution Decision, we adopted the assessment offered by Petitioner. Dec. 6–7. Because Petitioner’s definition of the level of skill in the art is consistent with the ’562 patent and the asserted prior art, we maintain Petitioner’s definition for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir 2001).” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “comprises the recited metals and has the recited thickness, which forms an electrical contact for use on a semiconductor device generally or a group III- V semiconductor in particular. This is consistent with our determination that “electrode stack” is a conductor that provides a path for current entering or leaving a medium such as a semiconductor device We disagree with Patent Owner that “electrode stack” as used in the challenged claims should be limited to the specific electrodes shown in the embodiments described in the Specification. See PO Resp. 4–9. Although the Specification describes embodiments using source, drain, and Schottky gate electrodes as electrical contacts, we see no reason to construe the term “electrode stack” itself to be limited to these components as Patent Owner proposes. Claims 1 and 13 expressly recite that electrode stacks comprise the claimed “electrical contact,” without expressly including or precluding any specific type of electrode. Ex. 1001, 5:54–63, 6:37–47. The Federal Circuit advises that the Specification “is not a substitute for, nor can it be used to rewrite, the chosen claim language. ‘Specifications teach. Claims claim.’” SuperGuide, 358 F.3d at 875 (quoting SRI Int’l v. Matsushita Elec. Corp. of Am., 775 F.2d 1107, 1121 n.14 (Fed. Cir. 1985) (en banc)). The Specification does teach electrical contacts that include source, drain, and Schottky gate electrodes, but claims 1 and 13 are directed to electrical contacts that are not expressly so limited. Patent Owner’s proposed construction would effectively rewrite the claim by adding limitations, which we decline to do under the guise of claim construction. See id. (“Though understanding the claim language may be aided by the explanations contained in the written description, it is important not to import into a claim limitations that are not a part of the claim.”). In view of the foregoing, we construe the claim term “electrode stack” to mean “a conductor that provides a path for current entering or leaving a medium such as a semiconductor device.”” slip op. at 17

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “that the identified layers in Usui’s interconnect metallurgy structure form an “electrode stack including a plurality of metal layers and a capping layer formed over said plurality of metal layers” as recited in claim 1. See Pet. 11–12 (citing Ex. 1002 ¶¶ 89–91). Neither Petitioner nor Dr. Zhao, however, provide adequate explanation or evidence as to why Usui’s interconnect metallurgy structure forms an “electrode stack,” i.e., a conductor that provides a path for current entering or leaving a medium such as a semiconductor device. Dr. Zhao’s testimony merely repeats the disclosures in Usui and concludes, without further technical detail, explanation, or reference to objective evidence, that Usui’s Figure 8 discloses an electrode stack. Ex. 1002 ¶¶ 89–91. Dr. Zhao’s testimony sets forth Petitioner’s conclusory assertions as though they are facts, rather than setting forth facts and evidence in support of those assertions. Compare id. with Pet. 11–12. Absent underlying facts or evidence to support Dr. Zhao’s opinion, the cited testimony “adds little to the conclusory assertion for which it is offered to support, and is entitled to little weight.” Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential). In contrast, Patent Owner’s declarant Dr. Piner testifies, with evidentiary support, that interconnects (such as Usui’s interconnect metallurgy structure) and electrical contacts (such as that claimed in the ’562 patent) are not the same thing. See Ex. 2024 ¶¶ 63–70. For example, Dr. Piner explains: In other words, not all metals in a semiconductor device have the same purpose and could not be said to be interchangeable. By August 2009 it was well known to a POSA how to discern if a metal component in a transistor is an interconnect or serves as an electrical contact such as a gate contact or ohmic contact, based on the structure and functionality of the metal component. For example, interconnects are made up of metal strips and are deposited on insulators. EX-1011 (Mishra) at 216. Interconnects are low resistance conductors that can carry very high current densities. Id., 216, 217. Unlike Schottky contacts and ohmic contacts, interconnects do not provide non-linear IV response like Schottky contacts nor inject electrons and holes into semiconductors like ohmic contacts. Id., 218. As many of the references cited by Dr. Zhao illustrate, electrical contacts had their own highly complex design challenges. EX-1008 (Pearton), 41-59 (Pages 53-71 of 383) (discussing electrical contacts); EX-1017 (Kramer), 11-126 (Pages 18-130 of 151) (same). And while Dr. Zhao cites these as supporting a POSA’s knowledge of an electrical contact, none of these references describe electrical contacts as interconnects. Id. ¶ 71. Dr. Piner further testifies that Usui’s interconnect metallurgy structure is an interconnect, and not an electrical contact, because “Usui states that ‘[t]he structures fabricated by the process of the present invention are especially useful for forming electrical connections or wiring such as between active and/or passive devices of an integrated circuit structure.’” Id. ¶ 148 (citing Ex. 1004, 1:11–14) (alteration in original); see also id. ¶¶ 150– 151 (Dr. Piner testifying that Usui’s interconnect metallization structure is not an “electrode stack” under a broad definition of electrode). Dr. Piner’s testimony in this regard rebuts Petitioner’s and Dr. Zhao’s conclusory assertions to the contrary.” slip op. at 21

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “conductor that provides a path for current entering or leaving a medium such as a semiconductor device.” Thus, Petitioner must show that Usui’s layers 13–15, 18, and 19 provide a path for current entering or leaving a medium such as a semiconductor device. After reviewing the complete trial record, we are not persuaded that Petitioner has done so. Petitioner relies on the testimony of Dr. Zhao to support its contention that the identified layers in Usui’s interconnect metallurgy structure form an “electrode stack including a plurality of metal layers and a capping layer formed over said plurality of metal layers” as recited in claim 1. See Pet. 11–12 (citing Ex. 1002 ¶¶ 89–91). Neither Petitioner nor Dr. Zhao, however, provide adequate explanation or evidence as to why Usui’s interconnect metallurgy structure forms an “electrode stack,” i.e., a conductor that provides a path for current entering or leaving a medium such as a semiconductor device. Dr. Zhao’s testimony merely repeats the disclosures in Usui and concludes, without further technical detail, explanation, or reference to objective evidence, that Usui’s Figure 8 discloses an electrode stack. Ex. 1002 ¶¶ 89–91. Dr. Zhao’s testimony sets forth Petitioner’s conclusory assertions as though they are facts, rather than setting forth facts and evidence in support of those assertions. Compare id. with Pet. 11–12. Absent underlying facts or evidence to support Dr. Zhao’s opinion, the cited testimony “adds little to the conclusory assertion for which it is offered to support, and is entitled to little weight.” Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential).” slip op. at 21

  Patent outcomesUS 8,686,562 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,686,562
• Innoscience America, Inc. v. Infineon Technologies Americas Corp.No claims unpatentable
  PTAB · Jun 12, 2026 · IPR2025-00094 · APJ Christopher M Kaiser · IPR · Final written decision

  Claims 1–16 were not shown unpatentable under any asserted obviousness ground because Petitioner failed to establish the proposed modifications and combinations.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that one of ordinary skill in the art “would have possessed at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design.” Pet. 5 (citing Ex. 1003 ¶¶ 67–69). Petitioner also argues that “[a]dditional education could substitute for professional experience and vice versa.” Id. Patent Owner does not dispute Petitioner’s proposed level of ordinary skill. PO Resp. 1–76. Neither party explains why the outcome of this case would be affected by the adoption of the proffered definition of a person of ordinary skill in the art. Accordingly, and because it appears to be consistent with the ’003 patent and the asserted prior art, we adopt Petitioner’s assessment of the level of ordinary skill in the art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Neither party proposes construing any claim terms. Pet. 6; Prelim. Resp. 1–76. In addition, as discussed below, we are able to determine the outcome of this proceeding without expressly construing any terms. Thus, we do not construe any terms for the purposes of this Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 8

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “challenged claim. Unigene Labs., Inc. v. Apotex, Inc., 655 F.3d 1352, 1360 (Fed. Cir. 2011). “This is so because inventions in most, if not all, instances rely upon building blocks long since uncovered, and claimed discoveries almost of necessity will be combinations of what, in some sense, is already known.” KSR, 550 U.S. at 418–419. On the other hand, an obviousness analysis “need not seek out precise teachings directed to the specific subject matter of the challenged claim, for a court can take account of the inferences and creative steps that a person of ordinary skill in the art would employ.” Id. at 418; accord In re Translogic Tech., Inc., 504 F.3d 1249, 1259 (Fed. Cir. 2007). However, a petitioner cannot satisfy its burden of proving obviousness by employing “mere conclusory statements.” In re Magnum Oil Tools Int’l, Ltd., 829 F.3d 1364, 1380 (Fed. Cir. 2016). Instead, a petitioner must articulate a reason why a person of ordinary skill in the art would have combined or modified the prior art references. In re NuVasive, Inc., 842 F.3d 1376, 1382 (Fed. Cir. 2016); see also Metalcraft of Mayville, Inc. v. The Toro Co., 848 F.3d 1358, 1366 (Fed. Cir. 2017) (“In determining whether there would have been a motivation to combine prior art references to arrive at the claimed invention, it is insufficient to simply conclude the combination would have been obvious without identifying any reason why a person of skill in the art would have made the combination.”); Belden Inc. v. Berk-Tek LLC, 805 F.3d 1064, 1073 (Fed. Cir. 2015) (“[O]bviousness concerns whether a skilled artisan not only could have made but would have been motivated to make the combinations or modifications of prior art to arrive at the claimed invention.”) (citing InTouch Techs., Inc. v. VGO Commc’ns, Inc., 751 F.3d 1327, 1352 (Fed. Cir. 2014)). In arguing for the obviousness of claim 1 over the combination of Bonn and Mizuta, Petitioner argues that a person of ordinary skill in the art would have modified Bonn to perform high-frequency signal amplification. Pet. 19–25. In particular, Petitioner argues that a person of ordinary skill in the art “would have found it obvious to modify the circuit of Figure 1 [of Bonn] and use Figure 7’s structure for high frequency signal amplification in place of mixer 40,” followed by additional modifications to the circuit of Figure 1. Id. at 22–25. These additional modifications include removing LO port 55, removing FET 20 (along with voltage source 80, capacitors 16, 26, and 34, resistor 18, and inductors 22 and 24), removing capacitor 34 and shorting gate structure 324 to ground, and removing resistors 46 and 48 and shorting terminal 51 to ground. Id. According to Petitioner, the motivation for these modifications was that “Bonn . . . teaches using its dual gate structures for signal amplification without signal mixing.” Id. at 22 (citing Ex. 1006, 11:26–37). On the record developed at trial, we disagree. Bonn does, as Petitioner argues, teach that “the dual gate FET structure of the present invention can be tailored to provide superior performance over the prior art dual gate FET structures in high frequency signal mixing as well as other applications such as high frequency signal amplification.” Ex. 1006, 11:33–37. But the tailoring that Bonn refers to relates to changes to the structure of the field-effect transistor itself, not to the circuitry surrounding that transistor. Id. (teaching that the reason that “the dual gate FET structure of the present invention can be tailored” is that “the parameters such as gate width, dopant concentration, and channel depth, under each gate of the dual gate FET are individually adjusted for optimum performance”). Thus, although Bonn might have motivated a person of ordinary skill in the art to have made changes to the dual-gate FET itself, we are not persuaded that it would have motivated the additional changes to the circuit of Bonn’s Figure 1.” slip op. at 11

  • Strike new argumentNew argument disregardedDecided for patent owner

    “Mishra’s Figure 5 is a second gate in favor of a new position. Petitioner’s new argument is that a person of ordinary skill in the art would have found it obvious to connect the field plate of Mishra’s Figure 5 to the source instead of the gate, converting the field plate into a second gate. Compare Pet. 83 (equating “drain side gate” with “field plate 66, Figure 5”), 86–88 (identifying field plate 66 as a “second gate”), with Reply 21–22 (identifying only the embodiment of Mishra’s Figure 10 as a source-connected field plate), 22–23 (arguing that Mishra teaches that the Figure 5 embodiment “could be arranged as ‘a single transistor with a dual gate structure’”). Although “the introduction of new evidence in the course of the trial is to be expected in inter partes review trial proceedings,” Genzyme Therapeutic Prods. LP v. Biomarin Pharm. Inc., 825 F.3d 1360, 1366 (Fed. Cir. 2016), the shifting of arguments is not, Wasica Fin. GmbH v. Cont’l Auto. Sys., Inc., 853 F.3d 1272, 1286 (Fed. Cir. 2017). Accordingly, Petitioner’s change of arguments here is inappropriate. Moreover, even if we were to consider Petitioner’s inappropriate new argument, we would conclude that Petitioner does not support the argument with sufficient evidence. “Whether [an obviousness ground] is based on combining disclosures from multiple references, combining multiple embodiments from a single reference, or selecting from large lists of elements in a single reference, there must be a motivation to make the combination and a reasonable expectation that such a combination would be successful, otherwise a skilled artisan would not arrive at the claimed combination.” In re Stepan, 868 F.3d 1342, 1346 n.1 (Fed. Cir. 2017). Petitioner’s new argument relies on a person of ordinary skill in the art modifying the Figure 5 embodiment of Mishra to connect the field plate to the source rather than the gate. Reply 21–24. Petitioner does not, however, show that a person of ordinary skill in the art would have had a motivation to make this modification or a reasonable expectation that this combination would be successful. Id. Petitioner argues instead that “[n]o ‘reason’ is needed.” Id. at 24. Thus, Petitioner does not show by a preponderance of the evidence that claim 1 would have been obvious over the combination of Mishra and Ren.” slip op. at 19

  Patent outcomesUS 8,264,003 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,264,003
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.No claims unpatentable
  PTAB · Jun 9, 2026 · IPR2025-00321 · APJ Christopher M Kaiser · IPR · Final written decision

  The Board held claims 1, 2, 5–7, 9, 16, and 17 not unpatentable because the asserted combinations did not establish the required purge-tower teachings or prior-art status.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that one of ordinary skill in the art “would have had (1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶¶ 14–16). Petitioner also argues that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 24. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther

    “According to the ’713 patent, “[p]urge tower 24 itself may be . . . recycled or otherwise discarded as desired.” Ex. 1001, 8:27–28. This description provides some support for Patent Owner’s view, because a purge tower too intimately integrated with the part would be difficult or impossible to recycle or discard. This is further supported by the ’713 patent’s statement that “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Id. at 8:30–34. It also is supported by Dr. Hickner’s testimony that the ’713 patent “clearly shows . . . the 24 purge tower separated from the part” and that “the purge tower is a separate physical object.” Ex. 2016, 28:8–10, 64:1–9. On the other hand, there is evidence supporting Petitioner’s view that, as long as the purge tower is generally separate from the part and the support structure, it may still make contact with those portions of the print. As noted above, “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Ex. 1001, 8:30–34. This language does not exclude locations adjacent to or in contact with the part or the support structure. Thus, determine that a “purge tower,” as that term is used in the context of the ’713 patent, may not be an integrated portion of a printed part or support structure but need not be free of all contact with the printed part or support structure.” slip op. at 9

  • BurdenNot shown unpatentable

    “There is evidence of record to support both Petitioner’s view and Patent Owner’s view. On the record developed at trial, however, we cannot say that the preponderance of the evidence favors Petitioner, who bears the burden of proof. See 35 U.S.C. § 316(e). Accordingly, Petitioner has not shown by a preponderance of the evidence that KISSlicer teaches printing a layer of a purge tower each time the printer switches one extruder to the operating mode. Because proving the obviousness of claims 1 and 16 requires such a showing, Petitioner has not shown by a preponderance of the evidence that claims 1 and 16 would have been obvious over the combination of Priedeman and KISSlicer. 5. Analysis of Remaining Claims Claims 2, 6, 7, 9, and 17 all depend, directly or indirectly, from claim 1 or claim 16. Accordingly, they all include the limitations of either claim 1 or claim 16. Because, as discussed above, Petitioner has not shown that the combination of Priedeman and KISSlicer teaches or suggests all the limitations of claims 1 and 16, Petitioner also has not proven by a preponderance of the evidence that claims 2, 6, 7, 9, and 17 would have been obvious over that combination of references.” slip op. at 21

  • Obviousness (§103) › Analogous artAnalogous artOther

    “On the record developed at trial, we agree with Petitioner. According to several industry forum posts, people interested in three-dimensional printing located the website where KISSlicer was posted between February 2012 and April 2012. Ex. 1028, 1 (post discussing and directing others to KISSlicer on April 11, 2012); Ex. 1031, 1 (two posts discussing KISSlicer on March 16, 2012, and March 21, 2012); Ex. 1032, 1 (two posts discussing KISSlicer on February 11, 2012, and February 14, 2012). Thus, not only was it possible for people of ordinary skill in the art to locate KISSlicer; people of ordinary skill in the art actually did locate it. Accordingly, Petitioner has shown by a preponderance of the evidence that KISSlicer was publicly accessible.” slip op. at 19

  Patent outcomesUS 9,421,713 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,421,713
• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.No claims unpatentable
  PTAB · Dec 10, 2025 · IPR2024-01186 · APJ Brian D Range · IPR · Final written decision

  Claims 1–20 were not shown unpatentable because Kwatra does not teach or suggest minimizing rotational velocity and acceleration as required by the claims.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) would have the following characteristics: “a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing or digital cameras.” Pet. 6 (citing Ex. 1002 ¶¶ 36–37). Petitioner states that, “[a]lternatively, a POSITA would have four years of experience working on image or video processing 6 Patent Owner asserts objective evidence of nonobviousness. Prelim. Resp. 19–27. or digital cameras.” Id. Petitioner further contends “[a]n advanced graduate degree in the disciplines cited above may make up for the work experience indicated above.” Id. Patent Owner does not dispute the level of ordinary skill in the art. Prelim Resp. 14–15. For purposes of this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the ’894 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “Petitioner “does not believe any terms require a formal construction.” Pet. 6. Patent Owner agrees “no claim terms presently require construction to resolve any current dispute between the parties.” PO Resp. 15. We do not discern a need to construe explicitly any claim language at this juncture because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 11

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “Kwatra teaches, at Equation 7, minimizing velocity and acceleration of a function representing camera path (P). FF ¶¶ 6, 8–9. Kwatra does not state that this camera path function considers rotation. Rather, the words “camera path” suggest x, y, z movement of the camera rather than rotation of the camera. Dr. Foroosh’s testimony that Kwatra’s minimization of a smoothed camera path does not result in minimizing rotational velocity and acceleration is credible because this testimony is consistent with Kwatra as a whole and consistent with the other evidence of record. Id. ¶ 10. Kwatra recognizes that image rotation angle (“θ”) may not remain smooth. Id. ¶ 12. But rather than attempting to minimize velocity and acceleration of rotation of the camera housing, Kwatra states that applying a smoothness constraint on rotation angle “may be non-linear.” Id. ¶ 13. Consistent with Kwatra, Dr. Foroosh credibly explains the difficulty of applying linear techniques to rotation. Id. Thus, Kwatra proposes instead constraining the sine and cosine of theta. Id. ¶ 14. The Kwatra provisional application is part of the Kwatra reference (id. ¶ 15), and it similarly opts for simpler schemes rather than estimating all parameters for all frames jointly. Id. ¶ 16. The provisional explains that the rotational component is relatively small such that non-linear computations minimizing velocity and rotation can be avoided. Id. ¶¶ 17–18. The testimony of Patent Owner’s witness, Dr. Foroosh, explaining the provisional is credible (Ex. 2018 ¶ 72) because it is consistent with Kwatra’s complete disclosure. Dr. Foroosh’s testimony is more credible than the testimony of Petitioner’s witness, Dr. Katsaggelos, because Dr. Katsaggelos did not review the Kwatra provisional application and, thus, did not review the entire disclosure of Kwatra. Id. ¶ 19; see also In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc) (obviousness analysis considers whether “the claimed inventions are rendered obvious by the teachings of the prior art as a whole” (emphasis added)).” slip op. at 28

  • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

    “(id. ¶ 15), and it similarly opts for simpler schemes rather than estimating all parameters for all frames jointly. Id. ¶ 16. The provisional explains that the rotational component is relatively small such that non-linear computations minimizing velocity and rotation can be avoided. Id. ¶¶ 17–18. The testimony of Patent Owner’s witness, Dr. Foroosh, explaining the provisional is credible (Ex. 2018 ¶ 72) because it is consistent with Kwatra’s complete disclosure. Dr. Foroosh’s testimony is more credible than the testimony of Petitioner’s witness, Dr. Katsaggelos, because Dr. Katsaggelos did not review the Kwatra provisional application and, thus, did not review the entire disclosure of Kwatra. Id. ¶ 19; see also In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc) (obviousness analysis considers whether “the claimed inventions are rendered obvious by the teachings of the prior art as a whole” (emphasis added)).” slip op. at 28

  Patent outcomesUS 10,574,894 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,574,894
• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, IncNo claims unpatentable
  PTAB · Nov 25, 2025 · IPR2024-01165 · APJ William V Saindon · IPR · Final written decision

  Claims 1–21 were not shown unpatentable because Zhou does not teach the claimed low-light high-pass or stickiness parameter limitations.

  RulingsFinal written decision

  • BurdenFwd all claims patentableNot shown unpatentable

    “4. Conclusion for the Prior Art Analysis In sum, we find that Zhou does not disclose the low-light high-pass parameter or the stickiness parameter. Petitioner’s grounds for both independent claims 1 and 16 rely on Zhou for teaching a low-light high-pass parameter or a stickiness parameter. Pet. 23–28, 64. Because we find Zhou does not teach these limitations, all of Petitioner’s grounds fall for this reason. III. CONCLUSION For the reasons given above, we determine that Petitioner has not established by a preponderance of the evidence that any claim of the ’840 patent would have been obvious in view of the prior art cited.” slip op. at 18

  • Skill levelSkill level petitioner adoptedOther

    “A person of ordinary skill in the art (POSITA) in the field of the ’840 patent would have a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing, or digital cameras. Alternatively, a POSITA would have four years of experience working on image or video processing, or digital cameras. An advanced graduate degree in the disciplines cited above may make up for the work experience indicated above. Pet. 6 (citing Ex. 1002 ¶ 32). Patent Owner applies the same standard. PO Resp. 26–27. We use this agreed-upon standard for purposes of this Decision.” slip op. at 7

  • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

    “We review this testimony based on the strength of the underlying factual basis. 37 C.F.R. § 42.65(a); Ashland Oil, Inc. v. Delta Resins & Refractories, Inc., 776 F.2d 281, 294 (Fed. Cir. 1985) (“Lack of factual support for expert opinion going to factual determinations, however, may render the testimony of little probative value . . ..”). Here, the underlying factual basis is not very strong for either witness. That said, we find that Dr. Foroosh’s testimony is more logically sound and consistent with the ’840 patent disclosure. Based on our reading of the specification, we find a clear indication that “stickiness” has to do with the past. In order to control “the extent by which preceding portion(s) . . . impacts determination of the smoothed trajectory” (emphasis added), one must control the degree by which the past frames impact determination. And to control the degree of the past’s influence, one must, as a consequence, favor the past over the future. That is, the frame of reference of the stickiness parameter is the past. The specification could have used a time-agnostic term, like a “nearness” or “adjacency” parameter, but it did not. Thus, the fact that “stickiness” is used in conjunction with “preceding” indicates that it deals with a preference for preceding frames. On this basis, we find Dr. Katsaggelos’s testimony less persuasive than Dr. Foroosh’s.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “That said, we do not construe a stickiness parameter as prohibiting consideration of future frames. Instead, we determine that the stickiness parameter’s value determines the impact of the preceding portions, versus the following portions. The ’840 patent recognizes this, when it says that a stickiness parameter value of “1,” representing a “lazy” stabilizer that maximally favors the past, would not override a violation of the margin constraint based on the look-ahead (i.e., would not allow the viewing window to fall out of bounds in the event of large future motion). See Ex. 1001, 22:26–30; see also id. at 12:61–13:29 (acknowledging that favoring the past may lead to a conflict with the viewing window determination), 15:39–60 (adjusting the viewing window to ensure it does not violate a margin constraint). Thus, while a past-favoring parameter by necessity favors the past over the future, it does not prohibit consideration of the future. In view of the above, we construe the claimed “stickiness parameter” as a parameter that controls the extent by which preceding portions of the trajectory impacts determination of the smoothed trajectory, with an understanding that in order to favor preceding portions, to some extent, the parameter must relatively disfavor following portions.” slip op. at 10

  Patent outcomesUS 10,958,840 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,958,840
• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, IncNo claims unpatentable
  PTAB · Nov 25, 2025 · IPR2024-01164 · APJ William V Saindon · IPR · Final written decision

  Claims 1–21 were not shown unpatentable because Shi does not disclose the claimed low-light high-pass parameter required by the asserted obviousness grounds.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “Given the teachings of the specification, we agree with Patent Owner that a low-light high-pass parameter is a parameter of a smoothing function that favors high frequencies (high pass) when exposure times are long (low light). See Tr. 42:10–18 (Patent Owner’s counsel stating that “high-pass” means “there’s a bias or preference for high frequencies”); Ex. 2020, 93:23– 94:15 (Petitioner’s declarant, Dr. Katsaggelos, agreeing that a high-pass system attenuates the low frequency of a signal). Although we acknowledge Petitioner’s position that the specification provides other ways or considerations in implementing a smoothing function, based on our above analysis of the specification, we find that the specification describes the lowlight high-pass parameter as a specific component of a smoothing function. See, e.g., Ex. 1001, 21:17–25 (setting out several parameters besides the low-light high-pass parameter used in trajectory smoothing).” slip op. at 10

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “position and a real device position. Id. at 18:27–40. In other words, the blur is addressed by analyzing the image to identify motion and then shifting the image. Shi, however, does not disclose how its parameter is based on low light (or the long exposure times indicative of low light). In its Petition, Petitioner asserts that a person of ordinary skill in the art would understand that “blurs can be caused by low light conditions.” Pet. 28 (citing Ex. 1003 ¶ 111). Although this is true, that does not mean that Shi’s blurs are identified by a parameter that considers low light. As we just described, Shi identifies the blur by quantifying the amount of motion of the points in an image, not by identifying low light. This is simply a different way to determine the presence of motion blur. In Shi, blur is measured, whereas in the ’840 patent, it is inferred based on low-light conditions (e.g., by observing the exposure time). See, e.g., Ex. 1007, 18:7– 26; Ex. 1001, 19:12–26. In its Reply, Petitioner does not point to any further disclosures. Accordingly, we find that Shi does not disclose the “low-light” aspect of the claimed low-light high-pass parameter. This is sufficient to determine that Petitioner’s ground does not meet all claim limitations. Similarly, we find that Shi does not disclose the “high-pass” aspect of the parameter. Shi’s blur compensation uses a spherical interpolation to modify the image. Ex. 1007, 18:27–40. The low-light high-pass parameter, as we have construed the term, allows more high frequencies. To allow more high frequencies, this necessarily means either allowing fewer low frequencies, or allowing more high frequences as opposed to some counterfactual situation in which fewer high frequencies were going to be allowed. See Ex. 2020, 94:23–95:15; Ex. 2022. We are directed to no persuasive evidence from Petitioner that Shi’s spherical interpolation favors high frequencies over low frequencies. Accord Ex. 2018 ¶ 107 (Patent Owner’s expert stating that Shi’s spherical interpolation “reintroduce[es] both high- and low-frequency motion”). Even if Shi allows the viewing window to track the camera position “consistent with the natural blur in the image” (Ex. 1007, 17:63–67), we are not provided with sufficient evidence to conclude by a preponderance of the evidence that providing a similar visual goal as a high-pass parameter (Ex. 1001, 22:16–18, “the output motion may include high frequencies that mask motion blur”) is the same as having a high-pass parameter. Again, merely preserving high frequencies is not the same as having a “high-pass parameter” because, as construed, a “high-pass parameter” also involves some degree of attenuation of low frequencies or relative increase of high frequencies. Accordingly, we find that Shi does not disclose the “high-pass” aspect of the claimed low-light high-pass parameter.” slip op. at 18

  Patent outcomesUS 10,958,840 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,958,840
• Ascend Elements, Inc. v. Duesenfeld GmbHInstitution denied
  PTAB · Oct 10, 2025 · PGR2025-00037 · APJ Kevin W Cherry · PGR · Institution

  The Board denied institution of PGR on claims 1–14 because Petitioner did not show that any challenged claim was more likely than not unpatentable.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “information presented in the petition filed under [35 U.S.C. §] 321 . . . demonstrates that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” 35 U.S.C. § 324(a). For the reasons set forth below, we determine that Petitioner has failed to demonstrate that it is more likely than not that at least one of claims 1–14 of the ’463 patent is unpatentable. Accordingly, we deny institution of a postgrant review of claims 1–14 based on the grounds set forth in the Petition.” slip op. at 2

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that one of ordinary skill in the art “would have had at least a Bachelor’s degree in electrical engineering, material science, chemical engineering, or an equivalent field, as well as at least 2 to 3 years of academic or industry experience in the recycling or processing of lithiumion batteries. Additional formal education focusing on processing of lithium batteries may substitute for practical experience and additional practical experience can substitute for less education.” Pet. 10–11. Patent Owner does not contest this definition of a person of skill in the art. See Prelim. Resp. 11. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as, on the present record, it appears consistent with the ’463 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8

  • Expert testimonyPetitioner expert discountedPatent owner expert creditedDecided for patent owner

    “distinct from “comminute[ion],” Petitioner offers only the testimony of its expert, Mr. Juzkow, who equates Tomioka’s “cutting” with “comminute[ion].” See Ex. 1003 ¶ 121. However, Mr. Juzkow provides insufficient reasoning to support his conclusion, particularly given the intrinsic and extrinsic evidence discussed above. In contrast, Patent Owner’s expert, Mr. Dantam, provides extensive reasoning, supported by citations to other evidence, to support his conclusion that Tomioka’s “dismantling” is not the claimed “comminution.” Thus, we give more weight to Mr. Dantam’s testimony than Mr. Juzkow’s testimony. Weighing this evidence all together, we find that Petitioner has failed to show that it is more likely than not that Tomioka’s teaches the claimed comminution under Petitioner’s first theory.” slip op. at 15

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundTeaching away not foundNot shown unpatentable

    “obvious. Pet. 34–35. However, we agree with Patent Owner that Petitioner has also failed to show that it is more likely than not that Tomioka renders this limitation obvious. See Prelim. Resp. 28–31. To begin with, Petitioner’s contentions lack sufficient reasoning explaining why a person of ordinary skill would have modified Tomioka in the manner proposed. “[R]ejections on obviousness grounds cannot be sustained by mere conclusory statements; instead, there must be some articulated reasoning with some rational underpinning to support the legal conclusion of obviousness.” In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006). Petitioner merely asserts that a person of ordinary skill in the art could use the roller system in place of the dismantling disclosed for the embodiments in Figures 19 and 20. On this record, we find this bare contention insufficient. actual disclosure of Tomioka. The rollers in Tomioka are used to separate the “battery body” from the “resin package enclosing the battery body,” and Tomioka specifically discloses that this technique is designed to “avoid damaging the battery body.” Ex. 1005 ¶¶ 25, 26, 29; Ex. 2011 ¶¶ 72–73. Thus, there is a significant difference between what Tomioka teaches and what Petitioner proposes to use the roller system to do. In addition, as Patent Owner points out, Tomioka specifically discloses there are risks associated with mechanically crushing battery packs, such as “risk of sparking due to residual voltage if the battery units are damaged in the process.” Ex. 1005 ¶ 5. Although we do not agree with Patent Owner that this amounts to a “teaching away,” see In re Gurley, 27 F.3d 551, 553 (Fed. Cir. 1994), we do believe that this teaching suggests a trade off that should be weighed in determining whether to make the modification, see Medichem S.A. v. Rolabo S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006). However, Petitioner has failed to account adequately, if at all, for this trade off. Thus, we find that Petitioner has failed to show that it is more likely than not that Tomioka accounts for the claimed “comminuting.”” slip op. at 15

  § 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
  Patents in suitUS 12,119,463
• Apple Inc. v. Resonant Systems, Inc.All claims unpatentable
  PTAB · Oct 9, 2025 · IPR2024-00807 · APJ Karl D Easthom · IPR · Final written decision

  Claims 2 and 3 are unpatentable under § 103 over Gregorio, Ramsay, Tierling, Rossi, and Aldrich; claim 2 is also unpatentable over Gregorio, Ramsay, Wakuda, Rossi, and Aldrich.

  RulingsFinal written decision

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for petitioner

    “The parties agree that independent claim 2 includes means-plus- function limitations under 35 U.S.C. § 112 ¶ 6.8 Pet. 2–6; PO Resp. 7–15. An element in a claim for a combination may be expressed as a means . . . for performing a specified function without the recital of structure, material, or acts in support thereof, and such claim shall be construed to cover the corresponding structure, material, or acts described in the specification and equivalents thereof. 35 U.S.C. § 112 ¶ 6. In particular, the parties agree that the “driving component” and “control component” requirements of independent claim 2 are means-plus-function limitations. Pet. 2–6; PO Resp. 7. Construing a means-plus-function limitation under 35 U.S.C. § 112 ¶ 6 involves two steps: 1) identifying the claimed function and 2) identifying in the specification the corresponding structure that performs the claimed function. Med. Instrumentation & Diagnostics Corp. v. Elekta AB, 344 F.3d 1205, 1210 (Fed. Cir. 2003); Cardiac Pacemakers, Inc. v. St. Jude Med., Inc., 296 F.3d 1106, 1119 (Fed. Cir. 2002).” slip op. at 10

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Corresponding structure / algorithm (indefinite if none)Term construed petitioner constructionDecided for petitioner

    “1. Construction of “Driving Component” Petitioner contends that the claimed function of “driving component” is “drives the moveable component to oscillate within the housing.” Pet. 5; Ex. 2002, 2. Petitioner asserts that the corresponding structure is a coil of conductive wire 420” (Figures 4A–4G); “coil 514” (Figures 5A–5B); “coil 626” (Figure 6); “electromagnet” (Figures 10-11); “additional coils 1202 and 1204” (Figure 12); “coils 1302 and 1304” (Figure 13); “driving coils 1412 and 1414” (Figure 14); “coil 1510” (Figures 15–17); “stator coils” (Figures 24A-25). Pet. 5–6 (citing Ex. 1001, 5:2–34, 5:54–59, 6:32–35, 9:11–52, 9:64–10:22, 14:59); Ex. 2002, 2.). Patent Owner states that it “does not believe that the phrase involving a ‘driving component’ needs to be construed in order to resolve any issue in this proceeding.” PO Resp. 7. Patent Owner agreed to the above construction in the Apple Litigation, and the court adopted this construction. Ex. 2002, 2. The record supports Petitioner’s position and we adopt it.” slip op. at 11

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner’s expert declarant contends that a person of ordinary skill in the art (POSITA) would have had a degree in mechanical engineering, electrical engineering, physics, or a related technical field, and at least 2–3 years of experience related to the design or development of systems incorporating linear actuators; additional years of experience could substitute for the advanced-level degree. Ex. 1003 ¶ 30. Patent Owner offers “a similar level of ordinary skill in the art.” See PO Resp. 4. Based on a review of the record, we adopt Petitioner’s proposed level of ordinary skill in the art because it is consistent with the evidence of record, including the asserted prior art and ’337 patent specification.” slip op. at 9

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner

    “In contrast to Petitioner’s showing, at the passage cited by Patent Owner, Dr. Goossen, Patent Owner’s expert, does not provide a basis for his opinion that “the combined system of Gregorio-Ramsay-Rossi-Aldrich does not teach the claimed output to the power supply.” Ex. 2009 ¶ 156; PO Resp. 21 (citing Ex. 2009 ¶ 156). To the extent Dr. Goossen addresses the issue, like Patent Owner, Dr. Goossen concedes that “a POSITA would recognize in the [annotated drawing of Gregorio supplied by Petitioner] that a power supply is required that is not shown.” Ex. 2009 ¶ 116. And also like Patent Owner, Dr. Goossen concludes that Petitioner’s rationale that an “unshown power supply receives a signal from the processor is a sweeping conclusion that does not follow.” Id. For the reasons discussed above in connection with Patent Owner’s parallel arguments, this testimony is conclusory and unsupported. Primarily, it does not adequately address Petitioner’s showing and Dr. Hannaford’s testimony, discussed above, which relies on Gregorio’s statement that “[p]rocessor 12 outputs the control signals to drive circuit 26 which includes electronic components and circuitry used to supply LRA 18 with the required electrical current and voltage to cause the desired haptic effects.” Ex. 1004, 2:36–39 (emphases added). Dr. Goossen and Patent Owner also do not address the initial finding in the Institution Decision that “[t]he ’337 patent does not disclose any detail or structure for the controllable power supply, indicating that such a controllable power supply was well-known.” Inst. Dec. 30 (citing Ex. 1001, 6:33–35 (“The power supply 612 receives a control input 624 from the CPU to control the current supplied to the H-bridge switch for transfer to the coil 626.”)).16 And while Dr. Goossen contends that Dr. Hannaford’s reliance on Ramsay to further suggest control of the power supply is conclusory because “Dr. Hannaford’s statement about ‘the current provided from a power supply to the driving component’ has nothing to do with Ramsay’s disclosure,’” Dr. Goossen addresses Ramsay and Gregorio in isolation, without adequately addressing the combination, specifically where Gregorio teaches or suggests controlling a power supply in order to provide desired LRA amplitude and frequency haptic effects, which is in line with Ramsay’s teaching of user-customizable parameters to control amplitude and frequency for the same purpose. See Ex. 2009 ¶ 126; Pet. 53–54 (summarized above). Therefore, the Petition shows persuasively that Gregorio’s processor controls Gregorio’s power supply to provide power to its haptic unit or that such power supply control would have been obvious in view of Ramsay in order to allow a user to control the desired haptic effect.” slip op. at 41

  Patent outcomesUS 8,860,337 unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 8,860,337
• Luminex International Co., Ltd. / Menard, Inc. v. Signify Holdings B.V.Some claims unpatentable
  PTAB · Aug 13, 2025 · IPR2024-00101 · APJ Steven M Amundson · IPR · Final written decision

  Claims 1–7, 9–15, and 18–20 are unpatentable; claims 8, 16, and 17 are not shown unpatentable under the asserted grounds.

  RulingsFinal written decision

  • PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for patent ownerDecided for patent owner

    “G. Analysis 1. REAL PARTY IN INTEREST Based on the record before us and for the reasons explained below, we” slip op. at 32

  • PTAB / AIA Trials › §315(b) time barDecided for patent owner

    “III. WHETHER THE PETITION IS TIME BARRED The parties dispute whether the Petition is time barred based on a” slip op. at 18

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “vacated the panel’s decision denying institution. Paper 12, 6. Among other things, the Director determined based on a “review of the current record” that (1) Menard is not a real party in interest in this proceeding and (2) Menard is not a privy of Petitioner. Id. at 5. Further, the Director remanded the case to the panel and instructed the panel “to determine whether the Petition presents a reasonable likelihood of prevailing with respect to at least one of the challenged claims under 35 U.S.C. § 314(a), and to determine whether to institute inter partes review accordingly.” Id. at 5–6.” slip op. at 3

  • BurdenMixed

    “U.S. Patent No. 10,299,336 B2 (“the ’336 patent”) (Exhibit 1001). For the reasons explained below, a preponderance of the evidence shows that claims 1–7, 9–15, and 18–20 in the ’336 patent are unpatentable and does not show that claims 8, 16, and 17 are unpatentable. See 35 U.S.C. § 316(e) (2024).” slip op. at 2

  Patent outcomesUS 10,299,336 mixed
  § 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,299,336

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.