• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.Some claims unpatentable
  PTAB · Jul 6, 2026 · IPR2025-00191 · APJ Michael T Cygan · IPR · Final written decision

  Claims 3, 8, 11, 12, and 19 are unpatentable under §103; Petitioner did not show claims 6, 9, 10, 13–18, and 20 unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “at the critical time “would have had a Bachelor of Science degree in electrical engineering or a similar discipline, along with 2–3 years of professional experience working with (e.g., researching, designing, or teaching) monolithic 3D structures and NAND memory devices, or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 27 (citing Ex. 1003 ¶¶34–38). Petitioner further asserts that a POSITA “would have been aware of and generally knowledgeable about 3D NAND’s structure, how it is manufactured, and its component parts.” Id. Patent Owner does 5 Neither party presents evidence or arguments regarding objective evidence of non-obviousness. Pet. 100; PO. Resp. circuit design. PO Resp. 9–10 (citing Ex. 2021 ¶ 35). Neither Patent Owner nor Dr. Campbell considers the obviousness of the claims to turn on the precise definition of the level or ordinary skill in the art. PO Resp. 10; Ex. 2021 ¶ 35. For purposes of this Decision, we adopt Petitioner’s proposed level of ordinary skill, as it appears to be consistent with the specification of the ’322 patent and the prior art of record.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner

    “C. Claim Construction Neither party proposes any express claim construction. Pet. 27 (stating claims should receive their “plain and ordinary meaning”); PO Resp. 10 (stating that Petitioner’s challenges fail “under any reasonable construction”). In an inter partes review, we construe a patent claim “using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b).” 37 C.F.R. § 42.100(b). Under this standard, the words of a claim generally are given their “ordinary and customary meaning,” which is the meaning the term would have to a person of ordinary skill at the time of the invention, in the context of the entire patent including the specification. Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc). We determine no terms require express construction for purposes of this Decision.” slip op. at 8

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “We determine that such a configuration would be neither inoperable nor significantly undesirable. Dr. Campbell testified that he does not argue that this configuration would be inoperable. Ex. 1106, 74:12–17; Ex. 2021 ¶60. Dr. Lee testifies that this configuration is “consistent with Nishikawa[123]’s Figure 14B.” Ex. 1105 ¶ 13. Dr. Lee further testifies that this configuration would not necessarily require a larger footprint, but instead, “could simply replace the trenches, abutting the device edge.” Id. Dr. Campbell testified that if the circular TAC replaced the rectangular trench, “I don’t know what it would be or exactly where it would be,” and therefore, “I can’t say what the size of the red circle would have to be.” Ex. 1106, 83:19–84:3. Therefore, the record does not support finding a circular TAC to have a larger footprint. Absent a larger footprint, there is no evidence that the end-connected TAC would be undesirable.” slip op. at 15

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedMixed

    “nor significantly undesirable. Dr. Campbell testified that he does not argue that this configuration would be inoperable. Ex. 1106, 74:12–17; Ex. 2021 ¶60. Dr. Lee testifies that this configuration is “consistent with Nishikawa[123]’s Figure 14B.” Ex. 1105 ¶ 13. Dr. Lee further testifies that this configuration would not necessarily require a larger footprint, but instead, “could simply replace the trenches, abutting the device edge.” Id. Dr. Campbell testified that if the circular TAC replaced the rectangular trench, “I don’t know what it would be or exactly where it would be,” and therefore, “I can’t say what the size of the red circle would have to be.” Ex. 1106, 83:19–84:3. Therefore, the record does not support finding a circular TAC to have a larger footprint. Absent a larger footprint, there is no evidence that the end-connected TAC would be undesirable.” slip op. at 15

  Patent outcomesUS 11,581,322 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,581,322
• Boe Technology Group Co., Ltd. v. 138 East LCD Advancements LimitedSome claims unpatentable
  PTAB · Dec 1, 2025 · IPR2024-00973 · APJ George R Hoskins · IPR · Final written decision

  Claims 1, 3–7, 9–13, and 15–18 are unpatentable as obvious over Reiner and over Reiner with Takahara; claims 2, 8, and 14 were not shown unpatentable.

  RulingsFinal written decision

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed

    “patentability based solely on arguments considered above in the context of claim 4. See, e.g., PO Resp. 42–43, 47–52. Therefore, Patent Owner has waived any other argument. See Inst. Dec. 44; Paper 10, 10. We adopt Petitioner’s arguments concerning these claims having been obvious over Reiner as our own in this Decision. See Pet. 40–44, 50–56, 57–70, 71; Ex. 1003 ¶¶ 134–142, 154–168, 174–221, 227. Accordingly, we conclude a preponderance of the evidence establishes these claims are unpatentable as having been obvious over Reiner.” slip op. at 83

  • Expert testimonyOther
  • Skill levelOther

  Patent outcomesUS 9,184,157 mixed
  § 103 obviousnesscites KSR · Graham
  Patents in suitUS 9,184,157
• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.Some claims unpatentable
  PTAB · Oct 23, 2025 · IPR2024-00790 · APJ Jo-Anne M Kokoski · IPR · Final written decision

  Claims 1–3 are unpatentable as obvious over Kim; claims 4 and 5 were not shown unpatentable over the asserted grounds.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “SuperGuide, 358 F.3d at 875 (“We review the patent’s written description and drawings to confirm that the patentee’s own use of the disputed term is consistent with the meaning given to it by the court.”). The ’031 patent teaches that dielectric pairs of different tiers are etched to form staircases extending along the x-y plane. Ex. 1001, 13:27–28. As described above (§ I.D, supra), dielectric filling structure 311 is formed by depositing a dielectric filling material to fill the space remaining after portions of dielectric stack 203 are removed to form staircase structure 303. Id. at 13:36–41; see also id. at 22:63–65 (“Memory structure 1200 can be formed by forming dielectric filling structure 1201 to fill the space formed by the removal of portions of dielectric stack 1003.”) The ’031 patent then teaches that excess dielectric filling material overlying the topmost surface of staircase structure 303 is removed using a suitable planarization method. Id. at 13:41–44; see also 22:67–23:5 (performing a planarization process to remove excess dielectric filling structure 1201 over the top surface of memory structure 1200). According to the ’031 patent, the portion of the deposited dielectric filling material that remains “over staircase structure 303 and isolation layer 109” forms “dielectric filling structure 311 that surrounds staircase structure 303.” Id. at 13:44–48 (emphasis added); see also id. at 1:56–58 (stating in “some embodiments, the memory device also includes a filling structure surrounding the multiple-stack staircase structure”). structure is etched along the x-, y-, and z-axes, and the dielectric filling structure fills the spaces in the x-, y-, and z-directions created when the staircase structure is etched. Because the excess portion of the dielectric filling structure overlying the top of the staircase structure is removed, what remains is dielectric filling structure in the spaces around the staircase structure in the x-, y-, and z-planes. In this way, the ’031 patent teaches that the dielectric filling structure surrounds, i.e., is all around or encircles, the staircase structure.” slip op. at 11

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “(“POSITA”) would have had “a bachelor of science degree in electrical engineering or a similar discipline” with “2–3 years of professional experience working with (e.g., researching, designing, or teaching) monolithic 3D structures and NAND memory devices,” or “an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 22–23. Petitioner further contends that a “POSITA would have been aware of and generally knowledgeable about 3D NAND’s structure, its component parts, how it operates, and how it is controlled.” Id. at 23 (citing Ex. 1003 ¶¶ 41–44). Patent Owner states that it does not object to the definition of a POSITA proffered by Petitioner. PO Resp. 13–14 (citing Pet. 22). In the Institution Decision, we adopted the assessment offered by Petitioner. Dec. 7. Because Petitioner’s definition of the level of skill in the art is consistent with the ’031 patent and the asserted prior art, we maintain it for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir 2001).” slip op. at 7

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundMixed

    “Dr. Banerjee adequately explains why a POSITA would have been motivated to make dummy structures DS with a conductive core as Petitioner proposes. In an obviousness analysis, some kind of reason must be shown as to why a POSITA would have thought of combining or modifying the prior art to achieve the patented invention. See Innogenetics, N.V. v. Abbott Labs., 512 F.3d 1363, 1374 (Fed. Cir. 2008). Here, Petitioner offers only the general proposition that pillar support structures comprising electrically conductive material were known in the art, but this does not provide a reason why a POSITA would have been motivated to modify Kim’s dummy structures. Pet. 55–56; Ex. 1003 ¶¶ 156–157. Petitioner’s arguments and Dr. Banerjee’s testimony with respect to the modification of Kim leaves an analytical gap that does not apprise us of why a POSITA would have modified Kim’s dummy structures to include a conductive core as the pillar-support material recited in claim 4. Instead, Petitioner attempts to imbue a POSITA with the knowledge of the claimed invention, when no prior art reference, references of record, or other evidence conveys or suggests that knowledge. Petitioner’s argument that a POSITA would have modified Kim in this way appears to be premised on Petitioner’s knowledge of the ’031 patent disclosure. This is improper hindsight reasoning. Petitioner needed to explain sufficiently what invention to consider modifying Kim’s dummy structures to include a conductive core. Petitioner fails to provide such an explanation. See W.L. Gore & Assoc., Inc. v. Garlock, Inc., 721 F.2d 1540, 1553 (Fed. Cir. 1983) (In an obviousness analysis, we must “cast the mind back to the time the invention was made” and “occupy the mind of one skilled in the art who is presented only with the references, and who is normally guided by the thenaccepted wisdom in the art.”).” slip op. at 23

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentableDecided for patent owner

    “Dr. Banerjee adequately explains why a POSITA would have been motivated to make dummy structures DS with a conductive core as Petitioner proposes. In an obviousness analysis, some kind of reason must be shown as to why a POSITA would have thought of combining or modifying the prior art to achieve the patented invention. See Innogenetics, N.V. v. Abbott Labs., 512 F.3d 1363, 1374 (Fed. Cir. 2008). Here, Petitioner offers only the general proposition that pillar support structures comprising electrically conductive material were known in the art, but this does not provide a reason why a POSITA would have been motivated to modify Kim’s dummy structures. Pet. 55–56; Ex. 1003 ¶¶ 156–157. Petitioner’s arguments and Dr. Banerjee’s testimony with respect to the modification of Kim leaves an analytical gap that does not apprise us of why a POSITA would have modified Kim’s dummy structures to include a conductive core as the pillar-support material recited in claim 4. Instead, Petitioner attempts to imbue a POSITA with the knowledge of the claimed invention, when no prior art reference, references of record, or other evidence conveys or suggests that knowledge. Petitioner’s argument that a POSITA would have modified Kim in this way appears to be premised on Petitioner’s knowledge of the ’031 patent disclosure. This is improper hindsight reasoning. Petitioner needed to explain sufficiently what invention to consider modifying Kim’s dummy structures to include a conductive core. Petitioner fails to provide such an explanation. See W.L. Gore & Assoc., Inc. v. Garlock, Inc., 721 F.2d 1540, 1553 (Fed. Cir. 1983) (In an obviousness analysis, we must “cast the mind back to the time the invention was made” and “occupy the mind of one skilled in the art who is presented only with the references, and who is normally guided by the thenaccepted wisdom in the art.”).” slip op. at 23

  Patent outcomesUS 10,868,031 mixed
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 10,868,031
• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.Some claims unpatentable
  PTAB · Oct 22, 2025 · IPR2024-00794 · APJ Michael T Cygan · IPR · Final written decision

  Claims 1 and 6 are unpatentable over Park; claims 2–5 and 7–11 were not shown unpatentable on the asserted grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art Petitioner asserts that a person of ordinary skill in the art (“POSITA”) at the critical time “would have had a bachelor’s degree in electrical engineering or a similar discipline, along with 2-3 years of professional experience working with (e.g., researching, designing, or teaching) NAND flash memory devices, or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 19 (citing Ex. 1003 ¶¶ 36–37). Petitioner further asserts that a POSITA “would have been aware of and generally knowledgeable about 3D NAND’s structure, its component parts, how it operates, and how it is controlled.” Id. Patent Owner does not object to this assessment, arguing that its claims are valid regardless of the precise definition. PO 3 Neither party presents evidence or arguments regarding objective evidence of non-obviousness. skill, as it appears to be consistent with the specification of the ’623 patent and the prior art of record.” slip op. at 5

  • Expert testimonyPetitioner expert discountedMixed

    “the Petition, Petitioner’s approach to Shibata’s drive circuit and Park’s dummy channel/open region teachings results in a deficiency in its showing of reasonable expectation of success for its expressed combination of extending Park’s insulative trenches to replace some of its common source lines. Petitioner relies solely on the fact that the references are capable of performing the relied-upon functions or could possess the relied-upon structure. See, e.g., Pet. Reply 19–20 (stating, “If Shibata accommodates this type of trench . . . there is no reason Park cannot as well,” and “Park itself already presents a variety of ways to minimize any etching problem that may be encountered when using wet etching”). But Park does not describe its dummy channel or open region teachings as generally applicable to all of its embodiments. And Petitioner needs to show a reason why the application of Shibata would be reasonably expected to have been successfully applied in Park, not merely state that there is “no reason” to expect that it would not be successful. See DSS Tech. Mgmt., Inc. v. Apple Inc., 885 F.3d 1367, 1377 (Fed. Cir. 2018) (finding that even where two structures have “the same physical structure,” applying the teachings of one structure to the other requires “additional, reasoned analysis.”). The knowledge of one skilled in the art cannot bridge this gap, because these are inventive features of Park and Shibata. Furthermore, Petitioner also has not sufficiently explained, for any of its proposed augmentations, how metal gate deposition would occur sufficiently in the most remote regions of the long, parallel insulating layers in Petitioner’s Park-Shibata combination of such regions to avoid the risk of incomplete gate electrode layers in the final memory device that Patent Owner argues would result in a significant trade-off in memory device accuracy, and device scalability. PO Resp. 68 (citing Ex. 2010 ¶ 145). For example, Dr. Lee addresses only etching issues, not deposition issues. Ex. 1025, ¶¶ 32–47.” slip op. at 46

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “We agree with Petitioner. As pointed out by Patent Owner, the “trenches formed in the BSG” language of claim 1 reflects specific description of the gate-first method of manufacturing, but not the gate-last method of manufacturing. Ex. 1001, 7:17–19 (“referring to Fig. 1A, one or more first dielectric trenches . . . are formed in the one or more BSGs”). However, as Petitioner points out, the claims are to a memory “device,” not to a method of manufacturing or a device produced by specific manufacturing steps. Pet. Reply 1. During prosecution of the application that matured into the ’623 patent, the Examiner determined that the device of claim 1 was distinct from a separately claimed method of manufacturing and The Examiner’s requirement stated that the memory device of claim 1 is not limited by the disclosed process of manufacture because “the process claims require . . . deposition steps of polysilicon whereas the product claims do not require any polysilicon.” Id. Applicant agreed “without traverse” with the Examiner’s determination and selected to pursue only the “device” claims. Id. at 596 (“Applicant elects, without traverse, Invention I, Claims 1–11, drawn to a device”).4 The distinctiveness is also supported by the discussion in the ’623 patent of “formed in the BSG” that describes its device separately from its method of formation. The ’623 patent describes that “[i]n the disclosed memory device, one or more first dielectric trenches are formed in the BSG and extend in a length direction of the substrate to separate the BSG into a plurality of sub-BSGs.” Ex. 1001, 2:25–28. This description precedes, and is separate from, its description of an aspect of a process for manufacturing a memory device in which the BSG layer is formed and then “dielectric trenches are formed” that may “pass through the BSG layer” so that the “BSG layer is separated by the one or more first dielectric trenches into a plurality of sub-BSG layers.” Id. at 3:30–45. The description of the device having trenches formed in the BSG, which is not limited to a particular manufacturing process, further supports Petitioner’s contention that the “formed in the BSG” language is not limited to a particular manufacturing embodiment.” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageTerm construed board ownDecided for patent owner

    “We do not agree that such arguments support Patent Owner’s conclusion. Patent Owner acknowledges that two portions of a BSG that are connected at a small opening are not separated because both portions remain electrically connected to each other. Id. at 17 (stating, “common source regions 52a is merely in the middle of a single sub-BSG 2 (‘SUB-BLK2’) and does not divide it into further sub-BSGs because there is an H-cut 72 that connects the two sides of the common source region such that both regions are part of the same sub-BSG”) (citing Ex. 1001, 9:15–19, 9:41–44) (emphasis omitted); Ex. 1026, 34:4–15, 41:23–42:16 (Dr. Kuhn attesting that common source regions may isolate adjacent BSGs). Patent Owner considers other portions of the BSG to be separated into sub-BSGs because there is no such connection between the sub-BSG portions. Id. at 17–18 (annotating Ex. 1001, Fig. 1B). Under such reasoning, the addition of a trench closing a gap between two neighboring BSG portions, thereby breaking the electrical connection therebetween, would “separate” the two BSG portions into further sub-BSGs. In its obviousness assertions, Petitioner argues for such an interpretation of the claim. See Pet. Reply 10 (“Park’s layers 111 electrically separate its BSG”). Based on the above, we determine that the phrase “dielectric trenches formed in the BSG and extending in a length direction of the substrate to perform electrical separation between sub-BSGs, but does not require that the trenches act alone, extending from one end of the device to the other across the entire BSG. Similarly, the trenches need not have any particular length, and need only to have some length that performs that separation.” slip op. at 13

  Patent outcomesUS 10,950,623 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,950,623
• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.All claims unpatentable
  PTAB · Oct 7, 2025 · IPR2024-00795 · APJ Michael T Cygan · IPR · Final written decision

  Claims 1–9 and 11–19 are unpatentable as obvious over Lee or Zhao and Lee; the Board did not find claims unpatentable over Zhao or Yang alone.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art Petitioner asserts that a person of ordinary skill in the art (“POSITA”) at the critical time would have had a bachelor’s degree in electrical engineering or a similar discipline, along with 2-3 years of professional experience working with (e.g., researching, designing, or teaching) NAND memory devices (including issues relating to the operation, e.g., programming, of said devices), or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience). Pet. 18 (citing Ex. 1003 ¶¶ 35–38). Petitioner further asserts that a POSITA “would have been aware of and generally knowledgeable about NAND memory’s structure, its component parts, how it operates, and how it is controlled. Id. (citing Ex. 1003 ¶ 38). Patent Owner does not object to this assertion. PO Resp. 12. We adopt Petitioner’s proposed level of ordinary skill, as it appears to be consistent with the specification of the ’822 patent and the prior art of record.” slip op. at 6

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “1. Word line pre-pulse signal Patent Owner argues that such a signal “must increase in value and then decrease in value (or vice versa).” PO Resp. 13; PO Sur-Reply 1. Petitioner agrees with this construction. Pet. Reply. 3. Patent Owner further argues that the pre-pulse signal “prepares the word line before the programming step.” PO Resp. 13. We agree that Petitioner applies its teachings with the same understanding of “pre-pulse signal” as Patent Owner. See, e.g., Pet. 38–39 (asserting that Lee teaches, or that that Lee would make obvious, pre-bias signals applied as pulses). Because both parties agree that a pre-pulse signal “must increase in value and then decrease in value (or vice versa),” and apply this construction in their assertions and arguments, no dispute as to the meaning of this phrase exists in a manner that would affect the outcome of this decision. Therefore, we do not need to determine a particular construction. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci & Eng'g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “with the plain language of the claims, each claim states “disposed.” Patent Owner provides dictionary definitions for “disposed,” which is described as a verb. See, e.g., Ex. 2016, 3. When described as a verb in these definitions, “disposed” is the action of the actor; i.e., “the chief disposed his attendants in a circle” (Ex. 2019, 3); “She disposed of her estate among her heirs” (Ex. 2018, 3); “disposed of the matter efficiently” (Ex. 2017, 3); “troops disposed for withdrawal” (Ex. 2016, 3). Petitioner offers no contrary definition from either the Specification or any extrinsic source for that term. We agree with Patent Owner’s construction of “disposed” as “put in place” or “arranged in a particular position.” Nevertheless, the construction of “disposed” does not resolve the controversy over the language of claims 2, 3, 12, and 13. The claims recite “are disposed.” For example, claim 2 recites, “wherein the [first through third groups] of the plurality of word lines are disposed in an order of distance from the selected word line.” Under Patent Owner’s construction, this reads as, “wherein the [first through third groups] of the plurality of word lines are arranged in a particular position in an order of distance from the selected word line.” But claim 2 does not recite that the word lines are arranged “based on” the selected word line, or that the arrangement occurs only after a word line is selected, as argued by Patent Owner. We agree with Petitioner that the express language of claim 2 does not recite any limitation as to how or when the groups of word lines are disposed. Both parties point to the same language in the ’822 patent Specification in support of their position: “the word lines disposed between the selected word line and the top select gate TSG can be divided into multiple groups of the word lines.” PO Sur-Reply 2 (citing Pet. Reply 11 requires the recited arrangement to exist, at some point. But we determine that none of claims 2, 3, 12, or 13 require a step of arrangement, or an action to change the arrangement of grouped word lines.” slip op. at 9

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentableUnpatentable

    “not based on the location of the source or bit lines. Instead, Petitioner relies upon the distance from the selected word line and the drain-side of the string. See Pet. 66 (“the channel length between the drain-side of the string and word line selected for programming would be quite long, resulting in a relatively high channel resistance” (citing Ex. 1003 ¶ 360)). Petitioner asserts that Lee’s application of higher pre-charge voltages to the drain-side word lines “offset the channel resistance effect.” Id. (citing Ex. 1003 ¶ 361). Lee and Zhao both admittedly have “typical memory strings, which are a ‘vertical column’ of memory cells arranged in series between a source side select transistor and a drain side transistor.” PO Resp. 53 (emphasis omitted). Petitioner asserts that applying pre-charging to mitigate program disturb (sought by both Lee and Zhao) relies on the creation of a potential difference to facilitate electron redistribution. Pet. Reply 17–18 (citing Ex. 1004, 1:52–56; Ex. 1005, 17:4–12; Ex. 1021 ¶¶ 72–78). Petitioner asserts that the application of voltage can be performed from either end of the channel so long as it targets the portion of the channel desired to be pre- charged. Id. at 18 (citing Ex. 1021 ¶¶ 77–78; Ex. 1010, 17:16–23). Although Patent Owner points to Yang as showing different “biasing schemes” based upon whether the bit line, source line, or both are used for pre-charging, each of the cited Figures 8–10 of Yang indicates that Vbypass (Yang’s uncontested pre-pulse signal) is applied to at least some word lines between the selected word line and the drain-side SGD0. Ex. 1010, Figs. 8C, 9C, 10C; see PO Resp. 25–28 (“a ‘bypass voltage’ (‘Vbypass’) is applied to ‘not yet programmed’ memory cells during the ‘pre-charge phase’” (citing Fig. 8C) (emphasis omitted)). We do not discern in Patent Owner’s arguments, or in the evidence provided during trial, sufficient reasons why applying voltage from either source or bit line disturbs Petitioner’s asserted advantage of offsetting the resistance of the channel between a selected word line and the drain side of the string. Patent Owner further argues that Lee discusses a “wholly disparate approach” for mitigating program disturb than Zhao and that a POSITA would not have been motivated to apply Lee’s teaching to Zhao. PO Resp. 56–58. Patent Owner contends that because Zhao does not conduct current when applying its bypass voltage to equalize charges, but Lee does conduct current when doing so, Lee need only compensate for insufficient charge boosting due to the increased resistance component between source and drain and does not need to compensate for “resistance” effects creating voltage differences along the length of the memory string channel. Id. at 56. Dr. Przybylski’s supporting testimony is based upon such differences in the resistance components. See, e.g., Ex. 2011 ¶ 128. However, we have credited Dr. Liu’s testimony that a chain of transistors in both systems creates a resistance effect regardless of current flow in the steady state. Supra § II.F.1.b.2. We further agree with Petitioner that applying pre- on the creation of a potential difference to facilitate electron redistribution. Pet. Reply 17–18 (citing Ex. 1004, 1:52–56; Ex. 1005, 17:4–12; Ex. 1021 ¶¶ 72–78). We further credit Dr. Liu’s testimony that Zhao’s use of the same pre-charge voltages to not-yet-programmed word lines presents an issue of inadequate pre-charging that Lee addresses. Ex. 1021 ¶¶ 55–56; Pet. Reply 22–23. Consequently, we are persuaded by Petitioner that the chain resistance effects in Zhao and Lee permit the application of Lee’s method of pre-charging to mitigate program disturb to be applicable and desirable in Zhao’s method of applying pre-charging to mitigate program disturb. Consequently, we determine that Petitioner has shown persuasive motivation for its combination.” slip op. at 45

  Patent outcomesUS 11,501,822 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,501,822
• Luminex International Co., Ltd. / Menard, Inc. v. Signify Holdings B.V.Some claims unpatentable
  PTAB · Aug 13, 2025 · IPR2024-01469 · APJ Steven M Amundson · IPR · Final written decision

  Claims 1–7, 9–15, and 18–20 are unpatentable; claims 8, 16, and 17 are not determined unpatentable under the asserted prior-art grounds.

  RulingsFinal written decision

  • PTAB / AIA Trials › §315(b) time barNot time barredDecided for petitioner

    “G. Analysis 1. REAL PARTY IN INTEREST Based on the record before us and for the reasons explained below, we disagree with Patent Owner that Menard is a “real party in interest” under § 315(b). See Resp. 77–82; Sur-reply 27–28. First, the circumstances here differ materially from the circumstances in Ventex. There, two agreements defined the relationship between Ventex (the petitioner and manufacturer of Heatwave fabric) and Seirus (the alleged real party in interest and purchaser of Heatwave fabric). Ventex, IPR2017- 00651, Paper 152 at 7 & n.8. First, a 2013 Supplier Agreement “prevented Ventex from selling to Seirus competitors” and included an indemnity provision requiring Ventex to indemnify Seirus for losses arising from Ventex’s failure to perform certain obligations. Id. at 7, 14. Second, a 2016 Exclusive Manufacturing Agreement provided that Ventex would manufacture the Heatwave fabric only for Seirus in exchange for Seirus’s payment of an exclusivity fee. Id. at 7. Columbia (the patent owner) accused Seirus products incorporating the Heatwave fabric of infringing the patent at issue, and Columbia served Seirus with a complaint alleging patent infringement in 2014 more than two years before Ventex filed a petition in 2017. Id. at 5, 7. When determining that Seirus was a “real party in interest” under § 315(b), the Board reasoned that “Ventex and Seirus had a specially structured, preexisting, and well established business relationship with one another, including indemnification and exclusivity arrangements.” Ventex, IPR2017-00651, Paper 152 at 10; see id. at 12. Additionally, the Board noted that certain evidence “suggest[ed] that” slip op. at 32

  • PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner

    “G. Analysis 1. REAL PARTY IN INTEREST Based on the record before us and for the reasons explained below, we disagree with Patent Owner that Menard is a “real party in interest” under § 315(b). See Resp. 77–82; Sur-reply 27–28. First, the circumstances here differ materially from the circumstances in Ventex. There, two agreements defined the relationship between Ventex (the petitioner and manufacturer of Heatwave fabric) and Seirus (the alleged real party in interest and purchaser of Heatwave fabric). Ventex, IPR2017- 00651, Paper 152 at 7 & n.8. First, a 2013 Supplier Agreement “prevented Ventex from selling to Seirus competitors” and included an indemnity provision requiring Ventex to indemnify Seirus for losses arising from Ventex’s failure to perform certain obligations. Id. at 7, 14. Second, a 2016 Exclusive Manufacturing Agreement provided that Ventex would manufacture the Heatwave fabric only for Seirus in exchange for Seirus’s payment of an exclusivity fee. Id. at 7. Columbia (the patent owner) accused Seirus products incorporating the Heatwave fabric of infringing the patent at issue, and Columbia served Seirus with a complaint alleging patent infringement in 2014 more than two years before Ventex filed a petition in 2017. Id. at 5, 7. When determining that Seirus was a “real party in interest” under § 315(b), the Board reasoned that “Ventex and Seirus had a specially structured, preexisting, and well established business relationship with one another, including indemnification and exclusivity arrangements.” Ventex, IPR2017-00651, Paper 152 at 10; see id. at 12. Additionally, the Board noted that certain evidence “suggest[ed] that” slip op. at 32

  • Skill levelOther

    “C. Level of Ordinary Skill in the Art Factors pertinent to determining the level of ordinary skill in the art include (1) the educational level of the inventor; (2) the type of problems encountered in the art; (3) prior-art solutions to those problems; (4) the rapidity with which innovations are made; (5) the sophistication of the technology; and (6) the educational level of workers active in the field. Envtl. Designs, Ltd. v. Union Oil Co., 713 F.2d 693, 696–97 (Fed. Cir. 1983). Not all factors may exist in every case, and one or more of these or other factors may predominate in a particular case. Id. These factors are not exhaustive, but merely a guide to determining the level of ordinary skill in the art. Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007). Moreover, the prior art itself may reflect an appropriate skill level. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). Petitioner asserts that a person of ordinary skill in the art at the ’336 patent’s effective filing date would have had “a bachelor’s degree in mechanical engineering, electrical engineering, optics, or physics with at least three years of experience working in the design of LED lights or lighting fixtures; a master’s degree in one of the above disciplines with at least two years of experience; or equivalent experience.” Pet. 14 (citing Ex. 1004 ¶¶ 26–29). Dr. Eden’s testimony supports Petitioner’s assertion. See Ex. 1004 ¶¶ 27–28. Patent Owner “adopts for purposes of this proceeding only” Petitioner’s description of an ordinarily skilled artisan. Resp. 10 (citing Pet. 14). We adopt Petitioner’s description of an ordinarily skilled artisan because it comports with the technology and claims of the ’336 patent as” slip op. at 40

  • Obviousness (§103) › Objective indicia / secondary considerationsObjective indicia no nexusDecided for petitioner

    “Alleged Objective Indicia of Nonobviousness (i) General Principles Before reaching a conclusion about obviousness, we consider evidence concerning objective indicia of nonobviousness. See Apple, 839 F.3d at 1048. For such evidence to have substantial weight, “its proponent must establish a nexus between the evidence and the merits of the claimed invention.” ClassCo, Inc. v. Apple, Inc., 838 F.3d 1214, 1220 (Fed. Cir. 2016); see Ancora Techs., Inc. v. Roku, Inc., 140 F.4th 1351, 1361 (Fed. Cir. 2025) (noting that the Board did not err by requiring “a nexus to the challenged claims as opposed to the patent as a whole”). “[T]here is no nexus unless the evidence presented is ‘reasonably commensurate with the scope of the claims.’” ClassCo, 838 F.3d at 1220 (quoting Rambus Inc. v. Rea, 731 F.3d 1248, 1257 (Fed. Cir. 2013)). The patentee “bears the burden of showing that a nexus exists.” WMS Gaming, Inc. v. Int’l Game Tech., 184 F.3d 1339, 1359 (Fed. Cir. 1999). A rebuttable presumption of nexus arises “when the patentee shows that the asserted objective evidence is tied to a specific product and that product ‘embodies the claimed features, and is coextensive with them.’” Fox Factory, Inc. v. SRAM, LLC, 944 F.3d 1366, 1373 (Fed. Cir. 2019) (quoting Polaris Indus., Inc. v. Arctic Cat, Inc., 882 F.3d 1056, 1072 (Fed. Cir. 2018)). Whether a rebuttable presumption of nexus arises “turns on the nature of the claims and the specific facts.” Teva Pharms. Int’l GmbH v. Eli Lilly & Co., 8 F.4th 1349, 1362 (Fed. Cir. 2021). The presumption analysis should consider the unclaimed features in the product tied to the objective evidence to assess their significance and impact on the correspondence between the patented invention and the product. Quanergy Sys., Inc. v. Velodyne Lidar USA, Inc., 24 F.4th 1406, 1418 (Fed. Cir. 2022). When, “for example, the patented invention is only a small component of the product tied to the objective evidence, there is no presumption of nexus.” Henny Penny Corp. v. Frymaster LLC, 938 F.3d 1324, 1333 (Fed. Cir. 2019). Absent a presumption of nexus, the patentee may prove nexus by” slip op. at 76

  Patent outcomesUS 10,299,336 mixed
  § 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,299,336
• Luminex International Co., Ltd. / Menard, Inc. v. Signify Holdings B.V.Some claims unpatentable
  PTAB · Aug 13, 2025 · IPR2024-00101 · APJ Steven M Amundson · IPR · Final written decision

  Claims 1–7, 9–15, and 18–20 are unpatentable; claims 8, 16, and 17 are not shown unpatentable under the asserted grounds.

  RulingsFinal written decision

  • PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for patent ownerDecided for patent owner

    “G. Analysis 1. REAL PARTY IN INTEREST Based on the record before us and for the reasons explained below, we” slip op. at 32

  • PTAB / AIA Trials › §315(b) time barDecided for patent owner

    “III. WHETHER THE PETITION IS TIME BARRED The parties dispute whether the Petition is time barred based on a” slip op. at 18

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “vacated the panel’s decision denying institution. Paper 12, 6. Among other things, the Director determined based on a “review of the current record” that (1) Menard is not a real party in interest in this proceeding and (2) Menard is not a privy of Petitioner. Id. at 5. Further, the Director remanded the case to the panel and instructed the panel “to determine whether the Petition presents a reasonable likelihood of prevailing with respect to at least one of the challenged claims under 35 U.S.C. § 314(a), and to determine whether to institute inter partes review accordingly.” Id. at 5–6.” slip op. at 3

  • BurdenMixed

    “U.S. Patent No. 10,299,336 B2 (“the ’336 patent”) (Exhibit 1001). For the reasons explained below, a preponderance of the evidence shows that claims 1–7, 9–15, and 18–20 in the ’336 patent are unpatentable and does not show that claims 8, 16, and 17 are unpatentable. See 35 U.S.C. § 316(e) (2024).” slip op. at 2

  Patent outcomesUS 10,299,336 mixed
  § 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,299,336
• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.Instituted
  PTAB · Jul 25, 2025 · IPR2025-00191 · APJ Michael T Cygan · IPR · Institution

  The Board instituted review on all challenged grounds for non-disclaimed claims 3, 6, 8–20; it found a reasonable likelihood of success for claims 8–12 and 19.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “review. See 35 U.S.C. § 314; 37 C.F.R. § 42.4(a). The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons discussed below, we determine that Petitioner has sufficiently shown a reasonable likelihood that it will prevail as to the unpatentability of claims 8–12 and 19 of the ’322 patent but has not sufficiently shown a reasonable likelihood that it will prevail as to the unpatentability as to claims 3, 6, 13–17, and 20. Because Petitioner has sufficiently shown a reasonable likelihood that at” slip op. at 2

  • Adverse judgmentAdverse judgmentOther

    “B. Patent Owner’s Disclaimer of Claims 1, 2, 4, 5, and 7 As indicated above, Patent Owner filed a statutory disclaimer of claims 1, 2, 4, 5, and 7 of the ’322 patent. See Ex. 2006. In view of Patent Owner’s statutory disclaimer, we treat claims 1, 2, 4, 5, and 7 as having never been part of the ’322 patent. See Vectra Fitness, Inc. v. TNWK Corp., 162 F.3d 1379, 1383 (Fed. Cir. 1998) (“This court has interpreted the term ‘considered as part of the original patent’ in [35 U.S.C.] § 253 to mean that the patent is treated as though the disclaimed claims never existed.”). Because inter partes review cannot be instituted based on disclaimed claims, claims 1, 2, 4, 5, and 7 are outside the scope of this proceeding. 37 C.F.R. § 42.107(e) (“No inter partes review will be instituted based on disclaimed claims.”); General Elec. Co. v. United Techs. Corp., IPR2017- 00491, Paper 9 (PTAB July 6, 2017) (precedential) (denying institution in view of a statutory disclaimer of all the challenged claims). Thus, we confine our analysis in this Decision to claims 3, 6, and 8–20, the challenged claims that have not been disclaimed.” slip op. at 3

  • Other 314aDenied

    “Patent Owner filed a Brief on Discretionary Denial, and Petitioner filed a brief in opposition. Papers 10 and 18. The Director considered the briefing and determined that discretionary denial was not warranted. Paper 21.” slip op. at 2

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “at the critical time “would have had a Bachelor of Science degree in electrical engineering or a similar discipline, along with 2–3 years of professional experience working with (e.g., researching, designing, or teaching) monolithic 3D structures and NAND memory devices, or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 27 (citing Ex. 1003 ¶¶ 34–38). Petitioner further asserts that a POSITA “would have been aware of and generally knowledgeable about 3D NAND’s structure, how it is manufactured, and its component parts.” Id. Patent Owner does not provide any such assessment in its Preliminary Response. Prelim. Resp. 8; Ex. 2007 ¶ 22 (reserving the right to opine as to an alternative level of a POSITA). For purposes of this Decision, we adopt Petitioner’s proposed level of ordinary skill, as it appears to be consistent with the specification of the ’322 patent and the prior art of record.” slip op. at 8

  Claim construction§ 103 obviousnessDiscretionary denialcites KSR · Graham
  Patents in suitUS 11,581,322
• Innoscience America, Inc. v. Infineon Technologies Americas Corp.Instituted
  PTAB · Jul 10, 2025 · IPR2025-00175 · APJ Jo-Anne M Kokoski · IPR · Institution

  The Board instituted review of claims 1–17 on all asserted grounds, finding a reasonable likelihood of unpatentability on at least one challenged claim.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “Institution of an inter partes review is authorized by statute when “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314 (2018); see also 37 C.F.R. § 42.4 (2023). For the reasons discussed below, we determine that Petitioner establishes a reasonable likelihood of prevailing with respect to the patentability of at least one claim of the ’562 patent. Accordingly, we institute an inter partes review of claims 1–17 of the ’562 patent.” slip op. at 2

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “(“POSITA”) would have had “at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design,” and “[a]dditional education could substitute for professional experience and vice versa.” Pet. 6 (citing Ex. 1002 ¶¶ 80–” slip op. at 6

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their plain and ordinary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. Realtime Data LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). Neither party proposes any explicit construction of any term. See Pet. 7 (“For the purposes of this IPR, the plain meaning of each term can be applied.”). We do not expressly construe any term for purposes of this Decision.” slip op. at 7

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted

    “On this record, we are persuaded that Petitioner adequately establishes that Usui discloses all of the limitations of claim 1. Usui discloses that aluminum or aluminum alloy layer 15 is in electrical contact with titanium underlayer 13, and titanium nitride layer 14 is located “intermediate the [titanium underlayer] 13 and the aluminum or aluminum alloy layer 15” to prevent “reaction between the aluminum layer 15 and underlayer 13.” Ex. 1004, 3:27–29, 3:38–41, 3:58–63. Usui further discloses that “a capping layer is provided above layer 15,” and that “[p]referred capping layers are titanium nitride and combinations of as layer 18 of a group IVA metal, preferably titanium with a titanium nitride layer 19.” Id. at 3:67–4:6. Usui teaches that titanium nitride layer 19 is about 150 to 800 Å thick, and that the thickness of titanium underlayer 13 is between about 90 to 110 Å. Id. at 3:31–33, 4:6–8. Usui also teaches that the interconnect metallurgy structures described therein “exhibit[] enhanced electromigration characteristics” and “are especially useful for forming electrical connections or wiring such as between active and/or passive devices of an integrated circuit structure.” Id. at 1:8–14. Usui’s description of a plurality of metal layers (layers 13–18) and a capping layer formed over the plurality of metal layers (layer 19), along with its description of the structure’s usefulness for forming electrical connections in an integrated circuit structure, is sufficient, on this record, to establish that Usui discloses “an electrode stack including a plurality of metal layers and a capping layer formed over said plurality of metal layers” as recited in claim 1. Usui’s teaching that the capping layer is a refractory metal nitride (titanium nitride) that has a thickness (150–800 Å) greater than the bottommost layer of the plurality of metal layers (layer 13, 90–110 Å), sufficiently establishes, on this record, that Usui discloses the “said capping layer consisting only of a refractory metal nitride, said refractory metal nitride forming a top of said electrical contact and having a thickness greater than that of a bottommost layer of said plurality of metal layers” limitation of claim 1.” slip op. at 11

  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips
  Patents in suitUS 8,686,562
• Billerud Aktiebolag (Publ) v. Westrock MWV, LLCSome claims unpatentable
  PTAB · Mar 12, 2025 · IPR2023-01206 · APJ Elizabeth M Roesel · IPR · Final written decision

  Claims 1, 2, and 4–22 are unpatentable as obvious; claim 23 was not shown unpatentable. Substitute claims 25–26 are allowed, while 24 and 27 are denied for lack of written-description support.

  RulingsFinal written decision

  • Expert testimonyPetitioner expert discountedOther

    “Exhibits 1013 and 1014 are also not admissible as expert testimony because Mr. Wirén is not “qualified as an expert by knowledge, skill, experience, training, or education.” Fed. R. Evid. 703. “To offer expert testimony from the perspective of a skilled artisan in a patent case—like for claim construction, validity, or infringement—a witness must at least have ordinary skill in the art. Without that skill, the witness’ opinions are neither relevant nor reliable.” Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1376–77 (Fed. Cir. 2022). Mr. Wirén does not meet our definition of a person of ordinary skill in the art. See Section II.B, supra. That definition is based on the undisputed testimony of Messrs. Zotterman and Klass. Ex. 1003 ¶ 24; Ex. 2003 ¶ 26. Although Mr. Wirén has a Master’s of Science in chemical engineering, he lacks any experience or specialization in paperboard manufacturing. Ex. 2011, 12:1–10, 19:6–25, 20:2–7. We therefore agree with Patent Owner that Exhibits 1013 and 1014 are the testimony of Mr. Wirén and should be excluded from evidence because Mr. Wirén is not a person of ordinary skill in the relevant art. PO MTE 5–6, 9; Sundance, Inc. v. DeMonte Fabricating Ltd., 550 F.3d 1356, 1362 (Fed. Cir. 2008) (“Unless a patent lawyer is also a qualified technical” slip op. at 61

  • Skill levelSkill level board ownOther

    “Level of Ordinary Skill in the Art Based on the testimony of the parties’ witnesses, we determine that a person of ordinary skill in the art would have had a bachelor’s degree in paper science and engineering, chemical engineering, process engineering, mechanical engineering, or a related degree, with three to five years of experience in paperboard manufacturing, or a master’s degree in paper science and engineering, chemical engineering, process engineering, or mechanical engineering, or a similar field with a specialization in paperboard manufacturing. Ex. 1003 ¶ 24; Ex. 2003 ¶ 26. We find that the level of ordinary skill in the art, as articulated above, is consistent with the level of technical understanding and competence reflected in the ’142 Patent Specification and the asserted prior art references.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageTerm construed petitioner constructionDecided for petitioner

    “A claim construction that excludes a particular element is viewed as a “negative limitation.” Ethicon LLC v. Intuitive Surgical, Inc., 847 Fed. App’x 901, 907 (Fed. Cir. Mar. 15, 2021). “[S]uch exclusions must find support either in ‘the words of the claim’ or through an ‘express disclaimer or independent lexicography in the written description that would justify adding that negative limitation.’” Id. (citing Omega Eng’g, Inc. v. Raytek Corp., 334 F.3d 1314, 1323 (Fed. Cir. 2003); CCS Fitness, Inc. v. Brunswick Corp., 288 F.3d 1359, 1366–67 (Fed. Cir. 2002)). “The standards for finding lexicography and disavowal are exacting.” GE Lighting Sols., LLC v. AgiLight, Inc., 750 F.3d 1304, 1309 (Fed. Cir. 2014). “To act as its own lexicographer, a patentee must ‘clearly set forth a definition of the disputed claim term,’ and ‘clearly express an intent to define the term.’” Id. (citing Thorner, 669 F.3d at 1365). Similarly, disclaimer or disavowal requires that the specification or prosecution history demonstrate that the invention does not include a particular feature. Id. Here, we find no claim language, lexicography, or disclaimer in the ’142 Patent or its file history that would support defining a “hot-hard calender” as requiring that only one of the two rollers be heated to an elevated temperature.” slip op. at 12

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable

    “a contact surface of said thermo-roller is heated to an elevated temperature of at least 250°F.” Petitioner shows persuasively that the temperature limitation is taught by the combination of Fugitt and Papermaking. Pet. 32–34. Fugitt discloses that “[t]he rolls of the calender may be steam heated.” Ex. 1004 ¶ 26. In a section titled “Heated Rolls,” Papermaking discloses that “Steam can be used up to 170°C [338°F] surface temperature.” Ex. 1010, 95, 98. Petitioner is thus correct that, “[w]hile Fugitt teaches that a hot calender may be steam heated, Papermaking clarifies that one of ordinary skill in the art would understand that steam heated thermo-rollers may reach up to 338°F.” Pet. 36. Based on these disclosures, we are persuaded by Mr. Zotterman’s testimony that it would have been “obvious to heat the thermo-roller of Fugitt to at least 250°F.” Ex. 1003 ¶ 159. combine Fugitt and Papermaking because of Papermaking’s status as a “trusted handbook[],” because both references disclose a method of manufacturing a paperboard structure with hot calendering,” and “because of the known advantages of heated rollers.” Pet. 36–37; Ex. 1003 ¶¶ 157, 159, 162. Petitioner’s contention is supported by Papermaking’s disclosures that, for cartonboard, “[p]recalendering is used before the coater to reduce roughness and porosity” and “[h]igh thermo roll temperatures (in some cases over 200°C) result in bulk savings because of the temperature gradient.” Ex. 1005, 80–82; see also Pet. 38; Ex. 1003 ¶ 164 (citing these disclosures). Papermaking’s disclosed range of “up to 170°C [338°F]” for steam- heated rolls (Ex. 1010, 98), overlaps the claimed range of “at least 250°F.” Patent Owner agrees. Tr. 27:11–13. “If the relevant comparison between a disputed claim limitation and the prior art pertains to a range of overlapping values, ‘. . . even a slight overlap in range establishes a prima facie case of obviousness.’” Genentech, Inc. v. Hospira, Inc., 946 F.3d 1333, 1341 (Fed. Cir. 2020) (citing In re Peterson, 315 F.3d 1325, 1329 (Fed. Cir. 2003)). “[S]uch an overlap creates a presumption of obviousness, and . . . the burden of production falls upon the patentee to come forward with pertinent evidence that the overlapping range would not have been obvious in light of the prior art.” Id. (citing E.I. DuPont de Nemours & Co. v. Synvina C.V., 904 F.3d 996, 1006, 1008 (Fed. Cir. 2018)). slip op. at 21

  Patent outcomesUS 11,293,142 mixed
  Claim construction§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham
  Patents in suitUS 11,293,142

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.