• Innoscience America, Inc. v. Infineon Technologies Americas Corp.No claims unpatentable
  PTAB · Jun 12, 2026 · IPR2025-00094 · APJ Christopher M Kaiser · IPR · Final written decision

  Claims 1–16 were not shown unpatentable under any asserted obviousness ground because Petitioner failed to establish the proposed modifications and combinations.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that one of ordinary skill in the art “would have possessed at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design.” Pet. 5 (citing Ex. 1003 ¶¶ 67–69). Petitioner also argues that “[a]dditional education could substitute for professional experience and vice versa.” Id. Patent Owner does not dispute Petitioner’s proposed level of ordinary skill. PO Resp. 1–76. Neither party explains why the outcome of this case would be affected by the adoption of the proffered definition of a person of ordinary skill in the art. Accordingly, and because it appears to be consistent with the ’003 patent and the asserted prior art, we adopt Petitioner’s assessment of the level of ordinary skill in the art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Neither party proposes construing any claim terms. Pet. 6; Prelim. Resp. 1–76. In addition, as discussed below, we are able to determine the outcome of this proceeding without expressly construing any terms. Thus, we do not construe any terms for the purposes of this Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 8

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “challenged claim. Unigene Labs., Inc. v. Apotex, Inc., 655 F.3d 1352, 1360 (Fed. Cir. 2011). “This is so because inventions in most, if not all, instances rely upon building blocks long since uncovered, and claimed discoveries almost of necessity will be combinations of what, in some sense, is already known.” KSR, 550 U.S. at 418–419. On the other hand, an obviousness analysis “need not seek out precise teachings directed to the specific subject matter of the challenged claim, for a court can take account of the inferences and creative steps that a person of ordinary skill in the art would employ.” Id. at 418; accord In re Translogic Tech., Inc., 504 F.3d 1249, 1259 (Fed. Cir. 2007). However, a petitioner cannot satisfy its burden of proving obviousness by employing “mere conclusory statements.” In re Magnum Oil Tools Int’l, Ltd., 829 F.3d 1364, 1380 (Fed. Cir. 2016). Instead, a petitioner must articulate a reason why a person of ordinary skill in the art would have combined or modified the prior art references. In re NuVasive, Inc., 842 F.3d 1376, 1382 (Fed. Cir. 2016); see also Metalcraft of Mayville, Inc. v. The Toro Co., 848 F.3d 1358, 1366 (Fed. Cir. 2017) (“In determining whether there would have been a motivation to combine prior art references to arrive at the claimed invention, it is insufficient to simply conclude the combination would have been obvious without identifying any reason why a person of skill in the art would have made the combination.”); Belden Inc. v. Berk-Tek LLC, 805 F.3d 1064, 1073 (Fed. Cir. 2015) (“[O]bviousness concerns whether a skilled artisan not only could have made but would have been motivated to make the combinations or modifications of prior art to arrive at the claimed invention.”) (citing InTouch Techs., Inc. v. VGO Commc’ns, Inc., 751 F.3d 1327, 1352 (Fed. Cir. 2014)). In arguing for the obviousness of claim 1 over the combination of Bonn and Mizuta, Petitioner argues that a person of ordinary skill in the art would have modified Bonn to perform high-frequency signal amplification. Pet. 19–25. In particular, Petitioner argues that a person of ordinary skill in the art “would have found it obvious to modify the circuit of Figure 1 [of Bonn] and use Figure 7’s structure for high frequency signal amplification in place of mixer 40,” followed by additional modifications to the circuit of Figure 1. Id. at 22–25. These additional modifications include removing LO port 55, removing FET 20 (along with voltage source 80, capacitors 16, 26, and 34, resistor 18, and inductors 22 and 24), removing capacitor 34 and shorting gate structure 324 to ground, and removing resistors 46 and 48 and shorting terminal 51 to ground. Id. According to Petitioner, the motivation for these modifications was that “Bonn . . . teaches using its dual gate structures for signal amplification without signal mixing.” Id. at 22 (citing Ex. 1006, 11:26–37). On the record developed at trial, we disagree. Bonn does, as Petitioner argues, teach that “the dual gate FET structure of the present invention can be tailored to provide superior performance over the prior art dual gate FET structures in high frequency signal mixing as well as other applications such as high frequency signal amplification.” Ex. 1006, 11:33–37. But the tailoring that Bonn refers to relates to changes to the structure of the field-effect transistor itself, not to the circuitry surrounding that transistor. Id. (teaching that the reason that “the dual gate FET structure of the present invention can be tailored” is that “the parameters such as gate width, dopant concentration, and channel depth, under each gate of the dual gate FET are individually adjusted for optimum performance”). Thus, although Bonn might have motivated a person of ordinary skill in the art to have made changes to the dual-gate FET itself, we are not persuaded that it would have motivated the additional changes to the circuit of Bonn’s Figure 1.” slip op. at 11

  • Strike new argumentNew argument disregardedDecided for patent owner

    “Mishra’s Figure 5 is a second gate in favor of a new position. Petitioner’s new argument is that a person of ordinary skill in the art would have found it obvious to connect the field plate of Mishra’s Figure 5 to the source instead of the gate, converting the field plate into a second gate. Compare Pet. 83 (equating “drain side gate” with “field plate 66, Figure 5”), 86–88 (identifying field plate 66 as a “second gate”), with Reply 21–22 (identifying only the embodiment of Mishra’s Figure 10 as a source-connected field plate), 22–23 (arguing that Mishra teaches that the Figure 5 embodiment “could be arranged as ‘a single transistor with a dual gate structure’”). Although “the introduction of new evidence in the course of the trial is to be expected in inter partes review trial proceedings,” Genzyme Therapeutic Prods. LP v. Biomarin Pharm. Inc., 825 F.3d 1360, 1366 (Fed. Cir. 2016), the shifting of arguments is not, Wasica Fin. GmbH v. Cont’l Auto. Sys., Inc., 853 F.3d 1272, 1286 (Fed. Cir. 2017). Accordingly, Petitioner’s change of arguments here is inappropriate. Moreover, even if we were to consider Petitioner’s inappropriate new argument, we would conclude that Petitioner does not support the argument with sufficient evidence. “Whether [an obviousness ground] is based on combining disclosures from multiple references, combining multiple embodiments from a single reference, or selecting from large lists of elements in a single reference, there must be a motivation to make the combination and a reasonable expectation that such a combination would be successful, otherwise a skilled artisan would not arrive at the claimed combination.” In re Stepan, 868 F.3d 1342, 1346 n.1 (Fed. Cir. 2017). Petitioner’s new argument relies on a person of ordinary skill in the art modifying the Figure 5 embodiment of Mishra to connect the field plate to the source rather than the gate. Reply 21–24. Petitioner does not, however, show that a person of ordinary skill in the art would have had a motivation to make this modification or a reasonable expectation that this combination would be successful. Id. Petitioner argues instead that “[n]o ‘reason’ is needed.” Id. at 24. Thus, Petitioner does not show by a preponderance of the evidence that claim 1 would have been obvious over the combination of Mishra and Ren.” slip op. at 19

  Patent outcomesUS 8,264,003 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,264,003
• Abbott Laboratories v. Miracor Medical SASome claims unpatentable
  PTAB · Jun 11, 2026 · IPR2025-00115 · APJ Annette R Reimers · IPR · Final written decision

  Claims 1–4, 10, 11, 14, 17, 21, 22, 24, 26, 28–30, 32, 33, and 35 are unpatentable; claim 15 is not shown unpatentable, based on the four asserted obviousness grounds.

  RulingsFinal written decision

  • ExcludeMotion to exclude, deniedDenied

    “IV. PATENT OWNER’S MOTION TO EXCLUDE Patent Owner seeks to exclude portions of Dr. Wieselthaler’s Declaration (Exhibit 1041), portions of Mr. Crosby’s Reply Declaration (Exhibit 1042), portions of the deposition transcript of Dr. Wieselthaler (Exhibit 2028), and the exhibits “upon which that testimony is based” (Exhibits 1015, 1038, 1044, 1046, 1049, and 1050). Mot. 1. According to Patent Owner, the Motion was made “to preserve objections previously made in the record.” Id. (citations omitted). Patent Owner did not timely move to strike any of the evidence at issue as being outside the scope of reply evidence. Patent Owner asserts that because an inter partes review must be based on prior art consisting of patents or printed publications (citing 35 U.S.C. § 311(b)), the testimony of Mr. Crosby and Dr. Wieselthaler concerning “various physical devices allegedly known” to a person of ordinary skill in the art is inadmissible, along with all of the exhibits (consisting of printed materials such a journal abstracts, press releases, and papers) related to those physical devices. Id. at 3–4; see also Mot. Reply 1–4 (arguing that “devices that Petitioner’s witnesses assert were in public use prior to the claimed inventions, are not prior art that can form the basis of an inter partes review”). According to Patent Owner, Dr. Wieselthaler was unable to “link two of these physical devices to the printed prior art asserted in this [inter partes review], but those attempts fell apart during his cross examination.” Id. at 4. Patent Owner further reasons that because the evidence “cannot be the basis” of an inter partes review, it “has probable,” “is irrelevant and not admissible,” “presents substantial danger of confusing the issues, causing undue delay, and wasting time in this trial,” and “are not ‘based on sufficient facts[,] the product of reliable principles and methods[, or] ‘a reliable application of the principles and methods to the facts of the case.’” Id. at 7 (citing Fed. R. Evid. 401–403, 702) (modification in original). With regard to Exhibits 1015, 1038, 1044, 1046, 1049, and 1050, Petitioner argues, and we agree, that Patent Owner identifies no plausible legal theory for their inadmissibility based on the contention that they discuss physical devices. See Mot. Resp. 3. We also agree with Petitioner that the exhibits are not “the basis for any ground” asserted in this proceeding, and may be properly relied upon by Dr. Wieselthaler and Mr. Crosby as support for their rebuttal testimony directed to Patent Owner’s arguments disputing Petitioner’s asserted motivation to combine the prior art relied upon in the instituted grounds. See id. at 3–4. In regard to the disputed testimony of Dr. Wieselthaler and” slip op. at 80

  • Skill levelSkill level board ownOther

    “B. Level of Ordinary Skill in the Art In determining the level of ordinary skill in the art, various factors” slip op. at 14

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “‘electronics for power and control’”). According to Mr. Crosby, a person of ordinary skill in the art “would have understood based on the disclosure of this setup that these speed and motor parameters were monitored by a sensor providing feedback to the controller.” Ex. 1003 ¶ 725. Mr. Crosby identifies no support for this opinion, which we give little weight to. The mere fact that Bourque’s pump used software to control speed and motor parameters does not show that Bourque used “one or more sensors” to provide feedback signals to the external control unit. Indeed, Petitioner fails to identify any evidence that Bourque used any “sensor” to monitor “speed and motor parameters.” Mr. Crosby also states that “[e]ach of the ‘ultrasonic flow probe’ and the ‘solid-state catheter-type pressure transducer’ described in [Bourque] is a ‘sensor’ as recited in Claim 33 that provides feedback signals to the external control unit (e.g., ‘electronics for power and control’ and ‘data acquisition’).” Id. ¶¶ 581, 726. Mr. Crosby’s opinion is again unsupported by the evidence, because, as explained above, there is no teaching in Bourque that either the “ultrasonic flow probe” or the “pressure transducers” used in the “in vitro characterization” studies were part of the heart assist pump device. Based on our review and consideration of Petitioner’s arguments and evidence directed to claim 11, we find that Petitioner has not shown by a preponderance of the evidence that the asserted combination of Bourque and Wampler teaches or suggests each of the limitations of dependent claim 11. We reach the same conclusion for the same reasons with regard to claim 33.” slip op. at 48

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “1. “magneto coupling” Claim 1 recites, in relevant part, a second magnetic device “positioned” slip op. at 25

  Patent outcomesUS 11,674,517 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,674,517
• Abbott Laboratories v. Miracor Medical SASome claims unpatentable
  PTAB · Jun 11, 2026 · IPR2025-00096 · APJ James A Tartal · IPR · Final written decision

  Claims 1–4, 6, 7, 10, 12, and 13 are unpatentable as obvious over Schima and Akamatsu; claim 5 was not shown unpatentable.

  RulingsFinal written decision

  • ExcludeMotion to exclude, deniedDenied

    “consequence in determining the action.” Fed. R. Evid. 401. Fed. R. Evid. 702 serves “a ‘gatekeeping role,’ the objective of which is to ensure that expert testimony admitted into evidence is both reliable and relevant.” Sundance, Inc. v. DeMonte Fabricating Ltd., 550 F.3d 1356, 1360 (Fed. Cir. 2008). There is no question that the disputed testimony of Dr. Wieselthaler and Mr. Crosby is relevant to the asserted motivation to combine and reliable, only whether it becomes “not relevant” or “unreliable,” in light of limited scope upon which grounds of unpatentability may be based under 35 U.S.C. § 311(b), because the testimony is based on, or supported by, knowledge of physical devices and publications discussing physical devices. Patent Owner directs us to no support for the notion that an expert’s testimony in an inter partes review must be limited to only the prior art relied upon as grounds for unpatentability and may not take into account any knowledge of, or publications concerning, other “physical devices” that would have been known to a person of ordinary skill at the relevant time. See generally Mot.25 In sum, we find that Patent Owner has 25 Patent Owner improperly asserts for the first time in its Reply in support of the Motion that “Petitioner in this case is improperly relying on non-prior art evidence.” Mot. Reply 3. This argument was not made in the Motion, and Patent Owner fails to identify what “non-prior art evidence” it seeks to exclude. We recognize that Petitioner appears to raise the argument that “non-prior art evidence” may be relied upon by an expert, but Petitioner also fails to identify what evidence it is referring to and that argument was not responsive to any issue Patent Owner raised in the Motion. See Mot. Resp. 5. To the extent the Parties intend “non-prior art evidence” to refer to the testimony of Dr. Wieselthaler and Mr. Crosby, we view the issue as pertaining to the weight afforded that testimony, in light of the supporting evidence relied upon, rather than one of admissibility. for the exclusion of evidence in this proceeding and deny the Motion.” slip op. at 83

  • Skill levelOther

    “B. Level of Ordinary Skill in the Art In determining the level of ordinary skill in the art, various factors” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other

    “D. Claim Construction In this proceeding we construe claims using the same claim” slip op. at 20

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable

    “5. Rationale in Support of Asserted Combination Petitioner shows, and there is no dispute, that Bourque and Wampler” slip op. at 48

  Patent outcomesUS 11,351,356 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,351,356
• Abbott Laboratories v. Miracor Medical SANo claims unpatentable
  PTAB · Jun 11, 2026 · IPR2025-00116 · APJ John D Hamann · IPR · Final written decision

  The Board held claims 1–5, 7, 10, 16–24, 26, and 28 not unpatentable under any of the four § 103 grounds because the petition failed to prove required limitations.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “We find that the ’077 patent and the cited prior art references reflect the appropriate level of skill at the time of the claimed invention and that the level of skill reflected in these references and in the ’077 patent is consistent with the definition of one of ordinary skill in the art proposed by Petitioner, which we adopt. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). We further find that our determinations in this Decision would be the same if we were to instead adopt the level of skill proposed by Patent Owner.” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “We agree with Patent Owner that “axially adjacent” should be given its plain and ordinary meaning of “adjacent to one another as measured along a central axis.” PO Resp. 5–6; see also Ex. 2015 ¶¶ 73–79 (Mr. Leschinsky addressing the claim term “axially adjacent” and explaining that a person of ordinary skill would have understood it to mean that the “first magnetic device and the rotor are ‘adjacent’ to one another, i.e., disposed next to one another, as measured along the central axis about which the rotor spins”). Patent Owner’s construction also is supported by Petitioner’s expert, Mr. Crosby, who agrees that “adjacent to one another as measured along a central axis,” could be “one meaning,” along with “many other meanings.” Ex. 2014,8 19:13–20:11. In sum, consistent with our Institution Decision, we conclude that the plain and ordinary meaning of “axially adjacent” is “at a position adjacent to one another as measured along a central axis.” See Dec. on Inst. 12.” slip op. at 14

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “Second, for the reasons below, we determine that we do not need to construe any other claim terms to resolve the disputes between the parties. See, e.g., Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)) (“[W]e need only construe” slip op. at 14

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “We agree with Patent Owner. As we discuss above, we find “axially adjacent” to mean “adjacent to one another as measured along a central arguments that rest on Petitioner’s assertion that in the Parallel Litigation, Patent Owner “asserts that a magnetic element sealed within a rotor is . . . ‘axially adjacent.’” Id. at 20–21, n.6 (citing Ex. 1019, 5–7). In particular, we find unavailing Petitioner’s argument that Wampler teaches that magnetic pieces 88 (“a first magnetic device”) “are inserted [‘axially adjacent’] in…the impeller.” Id. at 20–21 (citing Ex. 1008 ¶ 80, Fig. 13; Ex. 1003 ¶ 174). We also find unavailing Petitioner’s reliance on Wampler’s Figure 13 and Mr. Crosby’s cited testimony that “the ‘impeller’ and ‘magnetic pieces’ are axially adjacent—situated next to each other on the same axis.” Id. at 21–22 (annotating Ex. 1008, Fig. 13; citing Ex. 1003 ¶¶ 174–176). Petitioner does not sufficiently explain this argument, but appears to conflate being adjacent along a central axis with about an axis. Id. We also find unavailing Petitioner’s argument that under Patent Owner’s construction, Wampler also teaches this limitation, because Patent Owner “concedes that ‘axially adjacent’ components ‘have positioning that is next to one another, perhaps touching or sharing a common side, when measured along the axis.’” Pet. Reply 14–15 (citing PO Resp. 14). Petitioner mischaracterizes Patent Owner’s arguments and ignores Patent Owner’s showing that “axially adjacent” components are “distinct from components that are aligned with one another such that they overlap or occupy the same portion of an axis upon which they are positioned.” PO Resp. 14 (citing Ex. 2015 ¶ 78). For the preceding reasons, Petitioner fails to show by a” slip op. at 24

  Patent outcomesUS 11,754,077 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 11,754,077
• Abbott Laboratories v. Miracor Medical SASome claims unpatentable
  PTAB · Jun 10, 2026 · IPR2025-00114 · APJ Annette R Reimers · IPR · Final written decision

  Claims 1, 2, 4, 5, 7, 8, 11, 12, 14–16, 18, and 19 are unpatentable under §103; claim 20 was not shown unpatentable.

  RulingsFinal written decision

  • Expert testimonyDenied

    “IV. PATENT OWNER’S MOTION TO EXCLUDE Patent Owner seeks to exclude portions of Dr. Wieselthaler’s Declaration (Exhibit 1041), portions of Mr. Crosby’s Reply Declaration (Exhibit 1042), portions of the deposition transcript of Dr. Wieselthaler (Exhibit 2028), and the exhibits “upon which that testimony is based” (Exhibits 1015, 1038, 1044, 1046, 1049, and 1050). Mot. 1. According to Patent Owner, the Motion was made “to preserve objections previously made in the record.” Id. (citations omitted). Patent Owner did not timely move to strike any of the evidence at issue as being outside the scope of reply evidence. Patent Owner asserts that because an inter partes review must be based on prior art consisting of patents or printed publications (citing 35 U.S.C. § 311(b)), the testimony of Mr. Crosby and Dr. Wieselthaler concerning “various physical devices allegedly known” to a person of ordinary skill in the art is inadmissible, along with all of the exhibits (consisting of printed materials such a journal abstracts, press releases, and papers) related to those physical devices. Id. at 3–4; see also Mot. Reply 1–4 (arguing that “devices that Petitioner’s witnesses assert were the basis of an inter partes review”). According to Patent Owner, Dr. Wieselthaler was unable to “link two of these physical devices to the printed prior art asserted in this [inter partes review], but those attempts fell apart during his cross examination.” Id. at 4. Patent Owner further reasons that because the evidence “cannot be the basis” of an inter partes review, it “has no tendency to make any fact of consequence in this trial more or less probable,” “is irrelevant and not admissible,” “presents substantial danger of confusing the issues, causing undue delay, and wasting time in this trial,” and “are not ‘based on sufficient facts[,] the product of reliable principles and methods[, or] ‘a reliable application of the principles and methods to the facts of the case.’” Id. at 7 (citing Fed. R. Evid. 401–403, 702) (modification in original). With regard to Exhibits 1015, 1038, 1044, 1046, 1049, and 1050, Petitioner argues, and we agree, that Patent Owner identifies no plausible legal theory for their inadmissibility based on the contention that they discuss physical devices. See Mot. Resp. 3. We also agree with Petitioner that the exhibits are not “the basis for any ground” asserted in this proceeding, and may be properly relied upon by Dr. Wieselthaler and Mr. Crosby as support for their rebuttal testimony directed to Patent Owner’s arguments disputing Petitioner’s asserted motivation to combine the prior art relied upon in the instituted grounds. See id. at 3–4. In regard to the disputed testimony of Dr. Wieselthaler and” slip op. at 77

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownOther

    “1. “magneto coupling” Claim 1 recites, in relevant part, “a second magnetic device . . . positioned to magnetically drive rotation of the magnetically driven rotor via a magneto coupling with the first magnetic device.” Ex. 1001, 5:34–37. Claim 11 recites, in relevant part, “the second magnetic device positioned axially closer to the first magnetic device than to the magnetically driven rotor so as to magnetically drive rotation of the magnetically driven rotor relative to the one or more walls via a magneto coupling with the first magnetic device.” Id. at 6:42–48. Petitioner argues that “magneto coupling” means “a transfer of torque from one rotating permanent magnetic component to another rotating permanent magnetic component via a magnetic field.” Pet. 8–9 (citing Ex. 1003 ¶¶ 68–87). According to Petitioner, this construction is consistent with the ’879 patent, which describes “a coupling between two rotating ‘bar magnets’—a drive wheel rotates one bar magnet which causes another bar magnet (connected to a rotor) to rotate.” Id. (citing Ex. 1003 ¶¶ 54–55 (analyzing Ex. 1001, 2:28–52, 4:44–64, Fig. 2)). Patent Owner argues that “magneto coupling” should be afforded “its plain and ordinary meaning, which would encompass a magnetic coupling through both rotating magnets and the use of a rotating magnetic Owner directs us to the testimony of Mr. Leschinsky, who explains that a person of ordinary skill in the art would have understood the ’879 patent to use “magneto coupling” to generally describe “a way to couple the rotor to a drive element while sealing the two from one another and avoiding use of a direct mechanical coupling.” Ex. 2015 ¶ 67. According to Patent Owner, “Petitioner provides no recognizable basis for limiting the plain meaning of magnetic coupling to one type of magnet and excluding another type of magnet.” PO Resp. 6–7 (citing Johnson Worldwide Associates, Inc., v. Zebco Corp., 175 F.3d 985, 989–992 (Fed. Cir. 1999)). We agree with Patent Owner that Petitioner does not provide a sufficient basis for limiting the plain meaning of “magneto coupling.” That the ’879 patent describes embodiments using bar magnets does not serve to require the use of permanent magnets for the recited “magneto coupling.” See Sisvel Int’l S.A. v. Sierra Wireless, Inc., 81 F.4th 1231, 1236 (Fed. Cir. 2023) (quoting Phillips, 415 F.3d at 1323 (“[A]lthough the specification often describes very specific embodiments of the invention, we have repeatedly warned against confining the claims to those embodiments.”)). Moreover, the claim language here is not so limited. 13 Patent Owner notes that Petitioner’s grounds of unpatentability based on Wampler and Bourque depend on the disclosure only of electromagnetic drives in each reference, implying that “Petitioner does not believe its own proposed narrower construction.” PO Resp. 6; see also Pet. 8 (Petitioner alleging that in the Parallel Proceeding Patent Owner “conflates ‘magneto coupling’ . . . with a stator drive using a stationary electromagnet, instead of a rotating magnet, to rotate the rotor magnet,” and asserting that as the basis for Petitioner’s reliance on Wampler and Bourque as teaching a “magneto coupling” in this proceeding (citing Ex. 1019, 7; Ex. 1003 ¶¶ 84–87)).” slip op. at 24

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableUnpatentable

    “reasons discussed above. See supra Section III.D.3. Accordingly, because Petitioner’s contentions are premised on an unsupported claim construction that we reject, Petitioner fails to show how Wampler teaches or suggests “a magnetically driven rotor . . . axially adjacent to a first magnet device,” as required by claims 1 and 11, as well as by claims 2, 4, 5, 7, 8, 11, 12, 14– 16, and 18–20, which depend from either claim 1 or claim 11. In its Reply, Petitioner suggests that “[u]nder [Patent Owner’s] construction from the [Patent Owner Response], Wampler also teaches or suggests this limitation,” because Patent Owner “concedes [that] ‘axially adjacent’ components ‘have” slip op. at 36

  Patent outcomesUS 11,572,879 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,572,879
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.No claims unpatentable
  PTAB · Jun 9, 2026 · IPR2025-00321 · APJ Christopher M Kaiser · IPR · Final written decision

  The Board held claims 1, 2, 5–7, 9, 16, and 17 not unpatentable because the asserted combinations did not establish the required purge-tower teachings or prior-art status.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that one of ordinary skill in the art “would have had (1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶¶ 14–16). Petitioner also argues that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 24. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther

    “According to the ’713 patent, “[p]urge tower 24 itself may be . . . recycled or otherwise discarded as desired.” Ex. 1001, 8:27–28. This description provides some support for Patent Owner’s view, because a purge tower too intimately integrated with the part would be difficult or impossible to recycle or discard. This is further supported by the ’713 patent’s statement that “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Id. at 8:30–34. It also is supported by Dr. Hickner’s testimony that the ’713 patent “clearly shows . . . the 24 purge tower separated from the part” and that “the purge tower is a separate physical object.” Ex. 2016, 28:8–10, 64:1–9. On the other hand, there is evidence supporting Petitioner’s view that, as long as the purge tower is generally separate from the part and the support structure, it may still make contact with those portions of the print. As noted above, “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Ex. 1001, 8:30–34. This language does not exclude locations adjacent to or in contact with the part or the support structure. Thus, determine that a “purge tower,” as that term is used in the context of the ’713 patent, may not be an integrated portion of a printed part or support structure but need not be free of all contact with the printed part or support structure.” slip op. at 9

  • BurdenNot shown unpatentable

    “There is evidence of record to support both Petitioner’s view and Patent Owner’s view. On the record developed at trial, however, we cannot say that the preponderance of the evidence favors Petitioner, who bears the burden of proof. See 35 U.S.C. § 316(e). Accordingly, Petitioner has not shown by a preponderance of the evidence that KISSlicer teaches printing a layer of a purge tower each time the printer switches one extruder to the operating mode. Because proving the obviousness of claims 1 and 16 requires such a showing, Petitioner has not shown by a preponderance of the evidence that claims 1 and 16 would have been obvious over the combination of Priedeman and KISSlicer. 5. Analysis of Remaining Claims Claims 2, 6, 7, 9, and 17 all depend, directly or indirectly, from claim 1 or claim 16. Accordingly, they all include the limitations of either claim 1 or claim 16. Because, as discussed above, Petitioner has not shown that the combination of Priedeman and KISSlicer teaches or suggests all the limitations of claims 1 and 16, Petitioner also has not proven by a preponderance of the evidence that claims 2, 6, 7, 9, and 17 would have been obvious over that combination of references.” slip op. at 21

  • Obviousness (§103) › Analogous artAnalogous artOther

    “On the record developed at trial, we agree with Petitioner. According to several industry forum posts, people interested in three-dimensional printing located the website where KISSlicer was posted between February 2012 and April 2012. Ex. 1028, 1 (post discussing and directing others to KISSlicer on April 11, 2012); Ex. 1031, 1 (two posts discussing KISSlicer on March 16, 2012, and March 21, 2012); Ex. 1032, 1 (two posts discussing KISSlicer on February 11, 2012, and February 14, 2012). Thus, not only was it possible for people of ordinary skill in the art to locate KISSlicer; people of ordinary skill in the art actually did locate it. Accordingly, Petitioner has shown by a preponderance of the evidence that KISSlicer was publicly accessible.” slip op. at 19

  Patent outcomesUS 9,421,713 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,421,713
• Western Digital Technologies, Inc. v. Godo Kaisha IP Bridge 1No claims unpatentable
  PTAB · Apr 28, 2026 · IPR2024-01494 · APJ Justin T Arbes · IPR · Final written decision

  The Board found claims 5, 6, and 9–20 not shown unpatentable over either Bowen and Soukup or Nagahama and Soukup under § 103.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner argues that at the time of the ’909 patent (2004), a person of ordinary skill in the art would have had “a Ph.D. in electrical engineering, physics, materials science, or a related field, and at least one year of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent,” or “a Master’s degree in electrical engineering, physics, materials science, or a related field, and four years of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent,” where “[l]ess work experience may be compensated by a higher level of relevant education, and vice versa.” Pet. 18–19. In the Decision on Institution, we agreed with and applied Petitioner’s proposed definition. Dec. on Inst. 9. Patent Owner does not propose a different level of ordinary skill in the art in its Response. Both experts utilized Petitioner’s proposed definition. See Ex. 1024 ¶ 25; Ex. 2053 ¶¶ 29–30. Based on the full record developed during trial, including our review of the ’909 patent and the types of problems and solutions described in the ’909 patent and cited prior art, we maintain the previously adopted definition of the level of ordinary skill in the art and apply it for purposes of this Decision.” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “B. Claim Interpretation We interpret the claims of the challenged patent using the same claim construction standard that would be used to construe the [claims] in a civil action under 35 U.S.C. 282(b), including construing the [claims] in accordance with the ordinary and customary meaning of such [claims] as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent. 37 C.F.R. § 42.100(b). Petitioner argues that “the claim terms should be given their plain and ordinary meaning and no claim construction is necessary.” Pet. 15. We did not interpret any terms in the Decision on Institution. Dec. on Inst. 9–10. Patent Owner does not propose interpretations of any claim terms in its Response. We conclude, based on the full trial record, that no term requires express interpretation to determine whether Petitioner has met its burden to prove unpatentability of the challenged claims. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“Because we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy,’ we need not construe [a particular claim limitation] where the construction is not ‘material to the . . . dispute.’” (emphasis added) (citation omitted)).” slip op. at 8

  • Strike new argumentNew argument disregardedGranted in part

    “Pursuant to 37 C.F.R. § 42.23(b), “[a] reply may only respond to arguments raised in the corresponding . . . patent owner response.” “‘Respond,’ in the context of 37 C.F.R. § 42.23(b), does not mean proceed in a new direction with a new approach as compared to the positions taken in a prior filing.” Patent Trial and Appeal Board Trial Practice Guide § II.I, available at https://www.uspto.gov/patents/ptab/trial-practice-guide (last updated Dec. 12, 2025). “While replies . . . can help crystalize issues for decision, a reply . . . that raises a new issue or belatedly presents evidence may not be considered.” Id. An indication that a new issue is improperly raised in a reply is where a petitioner submits “new evidence necessary to make out a prima facie case” of unpatentability, such as a “newly raised rationale to combine the prior art references that was not expressed in the petition.” Id. That is the case here. Petitioner’s rationale in the Petition for why a person of ordinary skill in the art would have been motivated to lower Bowen’s 0.9 eV barrier height to 0.33 eV based on Soukup was that such an artisan would have expected lowering the barrier height to increase TMR. See Pet. 34–36. Faced with Dr. Bokor’s testimony on cross-examination, Petitioner presents a new theory in its Reply that a person of ordinary skill in the art would not have known what impact lowering the barrier height would have (increase TMR, decrease it, or have no impact at all), but would have expected it to change in some “uncertain” way, which is a “legally sufficient motivation” in Petitioner’s view. See Reply 6–10, 13–16, 23–25. In other words, “[r]ather than explaining how its original” position that lowering barrier height would increase TMR “was correct,” Petitioner articulated “an entirely new theory . . . absent from the [P]etition” after Patent Owner cross-examined Dr. Bokor and “pointed out the flaws of [Petitioner’s] position” in its Response. See Wasica Finance GmbH v. Continental Auto. Sys., Inc., 853 F.3d 1272, 1286 (Fed. Cir. 2017). “Shifting arguments in this fashion is foreclosed by statute, [Federal Circuit] precedent, and Board guidelines.” Id.” slip op. at 20

  • Expert testimonyPetitioner expert discountedPatent owner expert creditedDecided for patent owner

    “Ultimately, the cross-examination testimony above is inconsistent with Dr. Bokor’s opinions in his declaration that, for example, “[i]t was understood to one of skill that lowering the barrier height to increase tunneling would have increased the TMR,” and “[o]ne of skill would have been motivated to adjust oxygen vacancy defects to improve TMR by lowering the barrier height.” See Ex. 1024 ¶¶ 176, 277 (emphasis added); see also id. ¶ 172 (“[O]ne of skill in the art would have been motivated to use [Soukup’s 0.33 eV] or similar height in an MgO MTJ to improve tunneling and hence TMR in Bowen.”). Accordingly, we do not find Dr. Bokor’s declaration testimony regarding a motivation to lower Bowen’s barrier height credible. It is Petitioner’s burden to provide a reasoned, evidence-supported explanation for why a person of ordinary skill in the art would have been motivated to lower Bowen’s 0.9 eV barrier height to 0.33 eV as disclosed in Soukup. See NuVasive, 842 F.3d at 1383; Magnum Oil, 829 F.3d at 1380; TriVascular, 812 F.3d at 1066. Petitioner’s reasoning in the Petition that lowering the barrier height (by introducing oxygen defects) would increase TMR is unsupported by evidence.” slip op. at 31

  Patent outcomesUS 11,968,909 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,968,909
• Western Digital Technologies, Inc. v. Godo Kaisha IP Bridge 1Some claims unpatentable
  PTAB · Mar 27, 2026 · IPR2024-01447 · APJ Sheila F Mcshane · IPR · Final written decision

  Claims 1–2 are unpatentable as obvious over each Bowen-based combination; claims 3–4 were not shown unpatentable, and the Nagahama-based grounds failed for all claims.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In determining the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are 5 Nagahama, EP 1391942 A1, published February 25, 2004 (Ex. 1027, “Nagahama”). made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (citation omitted). The level of ordinary skill in the art is also reflected by the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). Consistent with the Institution Decision (Dec. 7), we adopt the assessment offered by Petitioner as it is consistent with the ’134 patent and the asserted prior art. Patent Owner does not dispute that Dr. Bokor is qualified as a person of ordinary skill in the art in accordance with the assessment adopted. See Tr. 90:9–15. Patent Owner, however, questions Dr. Bokor’s knowledge on the formation of crystalline materials and seeks to exclude his related testimony. See PO Resp. 1–2, 27; PO Mot. Excl. 12–15. We address this issue infra Section V.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner “submits the claim terms should be given their plain and ordinary meaning and no claim construction is necessary to find the claims unpatentable.” Pet. 24. Patent Owner does not raise any claim construction issues in its Response. See generally PO Resp. We determine that we need not expressly construe any claim terms to resolve the parties’ disputes. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 9

  • Strike new argumentNew argument consideredDenied

    “A reply may only respond to arguments raised” in the patent owner response. 37 C.F.R § 42.23(b). The Consolidated Trial Practice Guide states that responding “does not mean proceed[ing] in a new direction with a new approach,” and “[w]hile replies . . . can help crystalize issues for decision, a reply . . . that raises a new issue or belatedly presents evidence may not be considered,” that is, “Petitioner may not submit new evidence or argument in reply that it could have presented earlier, e.g. to make out a prima facie case of unpatentability.” Consolidated Trial Practice Guide § II.I (last updated Dec. 12, 2025) (“CTPG”), available at https://www.uspto.gov/patents/ptab/trial-practice-guide. We are not persuaded by Patent Owner’s assertions that Petitioner’s reply arguments on Parkin should not be considered. As discussed supra Section II.D.3.i above, the Petition includes the assertion that if Parkin’s CoFeB electrodes were used to modify Bowen, the MgO polycrystalline or single-crystal layer would still have the same 001 orientation. Pet. 33–34 (citing Ex. 1024 ¶ 129; Ex. 1062, 9:58–10:2, 18:49–51; Ex. 1005, 4:30–32). Petitioner’s support in the Petition references disclosures relating to Parkin’s Figure 3A (Ex. 1062, 18:49–51), which discloses a MgO(100) tunnel barrier, and the Petition also notes that the structure of Figure 3A may be inverted. Pet. 40 (citing Ex. 1062, 17:7–10). Patent Owner’s arguments, in large part, are related to Petitioner’s arguments in the Reply relating to Parkin’s Figure 11. Parkin’s Figure 11 is an embodiment where the structure of the devices of Figure 3A is inverted. See Ex. 1062, 22:29–33. We do not find that Petitioner’s arguments that are at issue in the Reply represent a new direction in its approach—the Petition is clearly based on the assertion that if Parkin’s CoFeB electrodes are used in Bowen, the device would have a MgO(001) tunnel barrier layer. Further, the Petition refers to Parkin’s disclosure that the device in Figure 3A may be inverted, which would be encompassed by the Figure 11 embodiment. Moreover, in the Institution Decision, we invited additional briefing on whether Parkin’s storage magnetic electrode was an amorphous ferromagnetic electrode, which relates to Parkin’s Figure 11 (Dec. 28–29). We are also not persuaded by Patent Owner’s argument that the Petition’s assertions do not correspond to what Petitioner argues in the Reply because they were referred to in the section pertaining to limitation 1[e]. The Petition includes a cross-reference in the limitation 1[d] discussion on the tunnel barrier layer limitation: “if Sunai’s or Parkin’s CoFeB electrodes are used as described in Claims 1[e] and 2 in this Ground, one of skill would understand that the MgO . . . would still have the same (001) orientation.” Pet. 33. Further, Petitioner’s arguments in its Reply properly respond to arguments made on contested issues. Patent Owner’s contentions on the merits in its Response are largely based upon the assertion that the modified MTJ of Bowen would not have a MgO(001) layer as claimed. See PO Resp. 4–10, 18–48. Petitioner’s reply arguments on Parkin relate to whether there would be a MgO(001) layer in its structure, so we find that Petitioner’s arguments on Parkin in its Reply (Pet. Reply 2–5) and the related evidence are appropriately responsive. slip op. at 17

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “We find that there is sufficient evidence in support of Petitioner’s assertion of the rationale to replace Bowen’s electrodes with CoFeB and anneal them. As discussed supra Section II.D.ii.2, Parkin’s Figure 11 depicts and describes a storage electrode that may be composed of amorphous CoFeB, with the formation of a MgO(001) barrier layer atop it. See Ex. 1062, 22:29–66. Patent Owner argues that Parkin’s benefits are because its CoFeB electrode is amorphous (PO Resp. 51–52), but this is not accurate. In Parkin, the CoFeB amorphous electrode crystallized at the interface layer between the barrier and the electrode. Id. at 19:6–19. Parkin discloses that higher TMRs were attributable to the crystallization of CoFeB. Id. at 18:63–19:22. Parkin also discloses that its completed CoFeB- MgOH(001)-CoFeB device was annealed with resulting high TMRs. Id. at 17:60–18:16. These disclosures provide support that one of skill in the art would have been motivated to replace Bowen’s electrodes with CoFeB and anneal to crystallize them because of the known improvements of TMR. Additionally, Parkin’s disclosures support that the results of the combination would have been predictable. That is, Parkin actually discloses an amorphous CoFeB electrode, formation of a MgO(001) tunnel barrier on the amorphous electrode, and annealing the assembly, with a resulting high TMR. Accordingly, Petitioner has provided reasoning with rationale underpinning for the motivation to combine. See KSR, 550 U.S. at 415 (“[t]he combination of familiar elements according to known methods is likely to be obvious when it does no more than yield predictable results”).” slip op. at 31

  Patent outcomesUS 8,405,134 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,405,134
• Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Power2b, Inc.All claims unpatentable
  PTAB · Mar 13, 2026 · IPR2021-01239 · APJ John D Hamann · IPR · Remand

  On remand, the Board held claims 17, 18, 21, 22, 26, and 30 unpatentable as obvious over Reime, with claims 17, 18, 21, 22, and 30 also obvious over Reime and Hinckley.

  RulingsRemand decision

  • ExcludeMotion to exclude, deniedDenied

    “In addition, Patent Owner filed a Motion to Exclude certain of Petitioner’s evidence (Paper 28) and Petitioner filed an Opposition (Paper 34). We denied this motion. See Paper 41, 47–50.” slip op. at 3

  • Skill levelSkill level board ownOther

    “one having ordinary skill in the art at the time of the invention of the ’850 patent: one who “would have had a bachelor’s degree in electrical engineering, computer engineering, computer science, or a related field, and . . . years of experience in the research, design, development, and/or testing of touch and/or proximity sensors, human-machine interaction and 3 The Leahy-Smith America Invents Act (“AIA”) included revisions to 35 U.S.C. § 103 that became effective on March 16, 2013. Because the ’850 patent issued from an application filed before March 16, 2013, we apply the pre-AIA version of the statutory basis for unpatentability. 4 US 2003/0034439 A1, published Feb. 20, 2003 (Ex. 1010, “Reime”). 5 US 2002/0021278 A1, published Feb. 21, 2002 (Ex. 1011, “Hinckley”). Petitioner lists the combination of Reime and Hinckley as a separate asserted ground for claim 26. We combine these two asserted grounds into one as they rely on the same combination. additional education substituting for experience and vice versa.” Final Dec. 8–9. This definition for one having ordinary skill was not the subject of appeal, and we maintain it for purposes of this Final Written Decision on Remand. Moreover, it is consistent with the ’850 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “PO Resp. 17–29; Pet. Reply 8–15; PO Sur-reply 6–11. We construed this term in the Final Written Decision. Final Dec. 10–24. In particular, we concluded that (i) “detector assembly” means “two or more detector elements that detect electromagnetic radiation,” and (ii) a detector assembly is not required to be physically separate from (i.e., not interspersed with) a pixel array. Id. at 20, 22. The Federal Circuit found the first part of our construction erroneous. Appeal Dec. 7–10. In particular, the Federal Circuit concluded that “[t]he element.” Id. at 8. In addition, to guide the Board’s analysis on remand, the Federal Circuit construed “the terms ‘at an edge’ and ‘at least one edge’ [to] require a detector assembly to be arranged along one or more edges of a viewing plane defining plate.” Id. at 10–11. In other words, the Federal Circuit “clarif[ied] that arranging a detector assembly ‘at,’ ‘along,’ or ‘about’ ‘at least one edge’ or ‘an edge’ does not limit the detector assembly to being arranged entirely on ‘one edge.’” Id. at 12.” slip op. at 9

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “the Federal Circuit already has concluded that claim 15 is obvious in view of Reime. Appeal Dec. 9–10. Claim 17 further recites “wherein the detector assembly comprises: a support substrate, and an arrangement of detector elements.” Ex. 1001, 67:15–18. We agree with Petitioner and find that Reime teaches these further limitations. Pet. 34–35; Pet. Remand 2–4; Pet. Resp. Remand 1–3. First, as we found in the Final Written Decision, Reime’s receivers 30 and 32 are two detector elements that detect electromagnetic radiation (i.e., light), and Reime’s receivers 30 and 32, collectively, comprise a detector assembly. Final Dec. 27–28 (citations omitted). Moreover, Reime’s two receivers 30 and 32 comprise a detector assembly having multiple detector elements (e.g., two receivers) to teach “an arrangement of detector elements.” Ex. 1010 ¶¶ 73, 86, Figs. 9A–9C; Ex. 2060,7 127:17–18; Pet. 32–33; Pet. Reply 20; Pet. Remand 3. In addition, as we found in the Final Written Decision, Reime teaches that each of receivers 30 and 32 are centered on opposite edges of the plate. 7 Deposition Transcript of Dr. Benjamin Bederson (Apr. 7, 2022). Ex. 1010, Fig. 6A, ¶ 82) (affirming that Reime teaches having one light receiver (e.g., 30 or 32) on each side of a four-sided touch pad). In further support, we agree with Petitioner and find that Reime teaches that receivers 30 and 32 “are mounted in the peripheral area surrounding the LCD 92.” Pet. 32–33; Ex. 1010 ¶ 86; see also id. at Figs. 9A–9C (showing that the receivers are positioned at the edge of the LCD screen); infra annotated Fig. 9E (showing receivers 30 and 32 along edges of the LCD). Accordingly, we find Reime’s detector assembly that comprises receivers 30 and 32 is arranged along two edges (one edge for each receiver) of the LCD, which meets the Federal Circuit’s construction for being arranged at at least one edge. See supra Section III (concluding “at least one edge” means “arranged along one or more edges”) (emphasis added).” slip op. at 12

  Patent outcomesUS 8,624,850 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 8,624,850
• Dr. Squatch, LLC v. The Procter & Gamble CompanyAll claims unpatentable
  PTAB · Jan 28, 2026 · IPR2024-01174 · APJ Susan L C Mitchell · IPR · Final written decision

  Claims 1–8 and 10–23 are unpatentable: the Board found claims 1–15 anticipated or obvious over the asserted grounds and claims 16–23 obvious over the Native combination.

  RulingsFinal written decision

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedOther

    “argument that the prior art fails to enable a stable deodorant stick. Rather, we are persuaded by Petitioner that Lesniak sufficiently teaches compositions with the relevant ingredients and achieves stable compositions through the use of a second wax having a melting point of 73 to 90° C. Reply 6–7 (citing Ex. 1003, 1:39–54). For example, Lesniak’s compositions (nos. 8 and 11) that used such a second wax, namely CastorWax MP80, are disclosed as sufficiently stable. Ex. 1003, Table 2. Here, we further credit the testimony of Dr. Michniak-Kohn that Lesniak teaches how to make stable compositions by including a secondary wax, such as castor wax, with a sufficiently high melting point. Ex. 1003, 1:39-54, 5:23-32, Table 2. Both of the compositions (nos. 8 and 11) tested by Lesniak that had such a wax passed the stability tests. Id. Ex. 1086 ¶ 7; see also Reply 6 (“Lesniak overcame any stability issues, as it expressly discloses compositions that are ‘physically stable at high and low temperatures.’”) (citing Ex. 1003, 5:23–32).” slip op. at 22

  • Skill levelSkill level petitioner adoptedOther

    “Petitioner proposes that a person of ordinary skill in the art (“POSA” or “POSITA”) at the time of the invention “would have (1) at least a B.S. or equivalent degree; and (2) at least two years of experience in cosmetics formulations.” Pet. 17 (citing Ex. 1002 ¶¶ 27–29). Patent Owner does not dispute Petitioner’s proposal about the POSA’s qualifications at this stage of the proceeding. PO Resp. 10. For this Decision, we adopt and apply Petitioner’s proposal above, which does not appear to be inconsistent with the level of skill reflected in the asserted prior art.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Preamble limiting or notPreamble limitingDecided for patent owner

    “Patent Owner asserts that the preamble of independent claim 1, 16, and 20 reciting “a deodorant stick” is limiting” as it provides antecedent basis for the recitation of “said deodorant stick being free of an aluminum salt” for each independent claim. PO Resp. 7–10. Patent Owner also points to dependent claims 6–9 as relying on the preamble reciting “a deodorant stick” as antecedent basis for claim elements. Id. at 9. We agree. Petitioner does not provide argument to the contrary. See, e.g., Pet. 19 (arguing that Lesniak discloses a deodorant stick in the form of an antiperspirant stick). We determine that no express construction of any claim term is necessary to determine whether to institute inter partes review. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). To the extent further discussion of the meaning any claim term is necessary to our decision, we provide that discussion below in our analysis of the asserted grounds of unpatentability.” slip op. at 8

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “We find that the evidence of record fails to support Patent Owner’s argument that the prior art fails to enable a stable deodorant stick. Rather, we are persuaded by Petitioner that Lesniak sufficiently teaches compositions with the relevant ingredients and achieves stable compositions through the use of a second wax having a melting point of 73 to 90° C. Reply 6–7 (citing Ex. 1003, 1:39–54). For example, Lesniak’s compositions (nos. 8 and 11) that used such a second wax, namely CastorWax MP80, are disclosed as sufficiently stable. Ex. 1003, Table 2. Here, we further credit the testimony of Dr. Michniak-Kohn that Lesniak teaches how to make stable compositions by including a secondary wax, such as castor wax, with a sufficiently high melting point. Ex. 1003, 1:39-54, 5:23-32, Table 2. Both of the compositions (nos. 8 and 11) tested by Lesniak that had such a wax passed the stability tests. Id. Ex. 1086 ¶ 7; see also Reply 6 (“Lesniak overcame any stability issues, as it expressly discloses compositions that are ‘physically stable at high and low temperatures.’”) (citing Ex. 1003, 5:23–32). Having considered the parties’ positions and evidence of record, summarized above, we determine that Lesniak provides sufficient disclosure to enable a person of ordinary skill in the art to formulate deodorant stick within the parameters of claim 1. Therefore, for the reasons discussed above, we conclude that Petitioner has proved by a preponderance of evidence that Lesniak anticipates claim 1.” slip op. at 22

  Patent outcomesUS 11,497,706 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites KSR · Graham
  Patents in suitUS 11,497,706

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.