- Jumio Corporation v. Facetec, Inc.No claims unpatentablePTAB · Jun 17, 2026 · IPR2025-00109 · APJ Bach V Hoang · IPR · Final written decision
Claims 1–24 were not shown unpatentable because the petitioner failed to establish motivation to combine the references and failed to show the claimed different-distance image capture.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Having considered the full record at trial, we maintain the preliminary finding regarding the level of ordinary skill in the art. See Inst. Dec. 11–12. In particular, based on the teachings of the ’910 Patent and the asserted prior art, we are persuaded that an ordinarily skilled artisan would have had a work experience related to biometrics, facial authentication, computer vision, and/or optics as at least one of those fields is respectively implicated by the ’910 Patent and the asserted prior at. Moreover, our decision would be the same under either proposed level of skill.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“C. Claim Construction We interpret claim terms using “the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. 282(b).” 37 C.F.R. § 42.100(b). Under the principles set forth by the Federal Circuit, the “words of a claim ‘are generally given their ordinary and customary meaning,’” as would be understood by a person of ordinary skill in the art at the time of the invention. Phillips v. AWH Corp., 415 F.3d 1303, 1312 (Fed. Cir. 2005) (en banc) (quoting Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996)). The parties do not dispute any claim terms or phrases and our decision does not require construing any particular claim terms or phrases, therefore, we do not expressly construe any particular claim term or phrase. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’”” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“We find that these reasons would not have adequately motivated a person having ordinary skill in the art to combine and modify the references in Petitioner’s asserted manner to reach the claimed features. Petitioner’s motivations — “substitution,” “obvious alternative . . . approaches,” “use of a known technique,” and “complimentary” techniques — are all similarly based on swapping or adding techniques for verifying three dimensionality. See Pet. 13–17; Pet. Reply 16–17. Those motivations might have been suitable had Tanii described techniques to verify three dimensionality, but Petitioner has not shown that Tanii describes any technique to verify three dimensionality. See Pet. 13–17, 25–28. Instead, as discussed above, Tanii describes the existence of the perspective distortion phenomenon and a technique for correcting it. As such, substituting the knowledge that perspective distortion exists and techniques to correct it does not correspond adequately motivate Petitioner’s combination. Put another way, because Tanii does not teach an approach for verifying three-dimensionality, Tanii’s techniques cannot be used as a substitute for approaches that do verify three dimensionality simply because Tanii discloses the concept of perspective distortion.” slip op. at 16
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“distance from the user. Derakhshani teaches two different approaches (1) focus-distance approach and (2) parallax approach. Petitioner acknowledges that the focus-distance approach does not expressly disclose capturing a second image at a second distance. Pet. 13 (distinguishing “focus distances” from “actual distances.”). This is because focus-distance, by definition, is not actual distance. Ex. 1005, 16:47–48 (“Focus distance is the distance from a sensor to a point in its field of view that is perfectly in focus.”) In Derakhshani’s focus-distance approach the camera stays the same distance from its subject—only the focus distance changes. Id. at 16:66–17:2 (“By comparing degree of focus for a landmark in images with different focus distances, the distance from the sensor to the landmark may be estimated.”) Derakhshani’s parallax approach also does not expressly disclose capturing a second image at a second distance. In the parallax approach the camera is rotated or slid about the user to create images with different perspectives. Ex. 1005, 17:59–64 (“In some implementations, the sensor is moved about the subject during image capture to collect image data from different orientations relative to the subject. For example, a single camera may be rotated or slid slightly or multiple cameras at different positions may be used for image capture.”). Rotating a camera around a user does not change the distance of the camera from the user. At the hearing Petitioner, indicating that Derakhshani takes a second image at a second distance. Tr. 16:9–12 (“[Petitioner’s Counsel: . . . Dr. Daft is talking about some of the terms that Derakhshani is using. For example, the term slid and shown in the images, he talks about how slid refers to the different distances between the sensor and the user.”). We determine that it is more likely that the word “slid,” as used in the relevant portion of Derakhshani, further describes the rotation of the camera about the user. Derakhshani indicates as much by describing that both rotating and sliding the camera are examples of how the camera sensor is “moved about the subject during image capture.” Ex. 1005, 17:60–61. Thus, sliding the camera does not necessarily disclose moving the camera to a second distance from the subject. Zhang also does not expressly disclose capturing a second image at a second distance. Petitioner acknowledges as much stating “[a]lthough Zhang does not expressly say that the second image is captured at a second distance different from the distance of the first image, this would have been obvious to a POSITA.” Pet. 61 (citing Ex. 1003 ¶ 1046). Because Zhang does not expressly disclose capturing a second image at a second distance, Petitioner once again relies on expert testimony to argue that the multiple images disclosed in Zhang would have been taken at different perspectives resulting from rotating or translating the position of the camera and that taking images at different distances would have enhanced Zhang’s homography-transformation procedure. Pet. 61–62 (citing Ex. 1003 ¶ 1046). From here Petitioner repeats many of the same arguments it made regarding the parallax approach from Derakhshani, except that these arguments are on even weaker footing because Zhang does not mention taking images by translating the position of the camera, nor even that the multiple images taken should be from different perspectives. Each of these assertions are made solely on the basis of Petitioner’s expert testimony, and as such are not persuasive. Pet. 61–62 (citing Ex. 1003 ¶¶ 1046). Petitioner’s argument that Zhang teaches capturing a second image at a second distance simply lacks sufficient support from Zhang’s disclosure.” slip op. at 25
Patent outcomesUS 11,874,910 not shown unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,874,910 - Jumio Corp. v. Facetec, Inc.No claims unpatentablePTAB · Jun 17, 2026 · IPR2025-00108 · APJ Nabeel U Khan · IPR · Final written decision
Claims 1–24 were not shown unpatentable because the asserted combinations lacked adequate motivation to combine and did not teach capturing images at different distances.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner argues Petitioner’s proffered level of skill is too broad with respect to work experience. PO Resp. 27–28. Patent Owner counters that a person having ordinary skill in the art would have had a Bachelor’s degree in electrical engineering, computer engineering, computer science, physics, or a related field, and two years’ work experience related to biometric security, facial authentication, and three-dimensional computer vision such that they would have had significant academic and/or work experience in both facial biometrics and computer vision. Id. at 28–29. Having considered the full record at trial, we maintain the preliminary finding regarding the level of ordinary skill in the art. See Inst. Dec. 13–14. In particular, based on the teachings of the ’938 patent and the asserted prior art, we are persuaded that an ordinarily skilled artisan would have had a work experience related to biometrics, facial authentication, computer vision, and/or optics as at least one of those fields is respectively implicated by the ’938 patent and the asserted prior at. Moreover, our decision would be the same under either proposed level of skill.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“C. Claim Construction We interpret claim terms using “the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. 282(b).” 37 C.F.R. § 42.100(b). Under the principles set forth by the Federal Circuit, the “words of a claim ‘are generally given their ordinary and customary meaning,’” as would be understood by a person of ordinary skill in the art at the time of the invention. Phillips v. AWH Corp., 415 F.3d 1303, 1312 (Fed. Cir. 2005) (en banc) (quoting Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996)). The parties do not dispute any claim terms or phrases and our decision does not require construing any particular claim terms or phrases, therefore, we do not expressly construe any particular claim term or phrase. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“images are three dimensional—let alone a technique that captures two images at different distances, compares the images for certain differences, and verifies three dimensionality based on those differences, as recited by the claim. Instead, Tanii describes a system that “corrects warp in which the perspective is exaggerated when an image is captured with the user’s face at close range.” Ex. 1007, code (57). In particular, Tanii recognizes the physical phenomenon of perspective distortion (fish-eye distortion) where “[i]f the image of the face of a person or the like is captured from a point that is relatively nearby, an image is obtained in which the perspective appears exaggerated,” i.e., the user image is warped or distorted. Id. ¶ 6; see id. ¶ 48, Fig. 4B. Tanii corrects such warped images by enlarging peripheral areas of the user image. Id. ¶¶ 55–56.” slip op. at 17
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“distance from the user. Derakhshani teaches two different approaches: (1) focus-distance approach and (2) parallax approach. Petitioner acknowledges that the focus-distance approach does not expressly disclose capturing a second image at a second distance. Pet. 12 (distinguishing “focus distances” from “actual distances.”). This is because focus-distance, by definition, is not actual distance. Ex. 1005, 16:47–48 (“Focus distance is the distance from a sensor to a point in its field of view that is perfectly in focus.”) In Derakhshani’s focus-distance approach the camera stays the same distance from its subject—only the focus distance changes. Id. at 16:66–17:2 (“By comparing degree of focus for a landmark in images with different focus distances, the distance from the sensor to the landmark may be estimated.”) Derakhshani’s parallax approach also does not expressly disclose capturing a second image at a second distance. In the parallax approach the camera is rotated or slid about the user to create images with different perspectives. Derakhshani, 17:59–64 (“In some implementations, the sensor is moved about the subject during image capture to collect image data from different orientations relative to the subject. For example, a single camera may be rotated or slid slightly or multiple cameras at different positions may be used for image capture.”). Rotating a camera around a user does not change the distance of the camera from the user. At the hearing Petitioner, instead, focused specifically on the use of the word “slid” in Derakhshani as indicating that Derakhshani takes a second image at a second distance. Tr. 16:9–12 (“[Petitioner’s Counsel: . . . Dr. Daft is talking about some of the terms that Derakhshani is using. For example, the term slid and shown in the images, he talks about how slid refers to the different distances between the sensor and the user.”). We determine that it is more likely that the word “slid,” as used in the relevant portion of Derakhshani, further describes the rotation of the camera about the user. Derakhshani indicates as much by describing that both rotating and sliding the camera are examples of how the camera sensor is “moved about the subject during image capture.” Derakhshani, 17:60–61. Thus, sliding the camera does not necessarily disclose moving the camera to a second distance from the subject.” slip op. at 27
Patent outcomesUS 11,693,938 not shown unpatentableClaim construction§ 103 obviousnesscites KSRPatents in suitUS 11,693,938 - Jumio Corporation v. Facetec, Inc.No claims unpatentablePTAB · Jun 17, 2026 · IPR2025-00107 · APJ Bach V Hoang · IPR · Final written decision
Claims 1–20 were not determined unpatentable because the petition did not establish motivation to combine the references or that they taught capturing images at different distances.
RulingsFinal written decision- Skill levelSkill level board ownDecided for patent owner
“Patent Owner argues Petitioner’s proffered level of skill is too broad with respect to work experience. PO Resp. 27–28. Patent Owner counters that a person having ordinary skill in the art would have had a Bachelor’s degree in electrical engineering, computer engineering, computer science, physics, or a related field, and two years’ work experience related to biometric security, facial authentication, and three-dimensional computer vision such that they would have had significant academic and/or work experience in both facial biometrics and computer vision. Id. at 28–29. Having considered the full record at trial, we maintain the preliminary finding regarding the level of ordinary skill in the art. See Inst. Dec. 8. In particular, based on the teachings of the ’606 Patent and the asserted prior art, we are persuaded that an ordinarily skilled artisan would have had a work experience related to biometrics, facial authentication, computer vision, and/or optics as at least one of those fields is respectively implicated by the ’606 Patent and the asserted prior at. Moreover, our decision would be the same under either proposed level of skill.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“The parties do not dispute any claim terms or phrases and our decision does not require construing any particular claim terms or phrases, therefore, we do not expressly construe any particular claim term or phrase. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“We find that these reasons would not have adequately motivated a person having ordinary skill in the art to combine and modify the references in Petitioner’s asserted manner to reach the claimed features. Petitioner’s motivations—“substitution,” “obvious alternative . . . approaches,” “use of a known technique,” and “complimentary” techniques—are all similarly based on swapping or adding techniques for verifying three dimensionality. See Pet. 12–16; Pet. Reply 6–7. These motivations might have been suitable had Tanii described techniques for verifying three dimensionality, but Petitioner has not shown that Tanii describes any technique to verify three dimensionality. See Pet. 12–16, 19–23. Instead, as discussed above, Tanii describes the existence of the perspective distortion phenomenon and a technique for correcting it. As such, substituting the knowledge that perspective distortion exists and techniques to correct it does not correspond with approaches for verifying three-dimensionality, and so does not adequately motivate Petitioner’s combination. Put another way, because Tanii does not teach an approach for verifying three-dimensionality, Tanii’s techniques cannot be used as a substitute for approaches that do verify three dimensionality simply because Tanii discloses the concept of perspective distortion.” slip op. at 16
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia with nexusObjective indicia outweighedDecided for patent owner
“Patent Owner has demonstrated a nexus by showing that certain objective indicia, discussed below, are the direct result of the unique characteristics of the claimed invention. As discussed above in our summary of the ’606 Patent and reflected in our discussion of Petitioner’s obviousness challenges (see §§ I.F, II.E.1, II.E.2, II.E.3), the unique characteristics of the claim relate to verification of three dimensionality by comparing two images taken at different distances for perspective distortion. Indeed, those features are what distinguish over the prior art. See id. Furthermore, Patent Owner, supported by testimony from its Chief Technology Officer, Mr. Rose, asserts the unique characteristics claimed are reflected in the “3D liveness checks” its ZoOm software product provides because ZoOm “confirms that a user is 3D by comparing images taken at different distances for expected differences in biometric data, such as the presence of appropriate perspective distortion and differences.” PO Resp. 25 (citing Ex. 2059 ¶ 49). Patent Owner’s assertion is further supported by a “FaceTec Software Explanation” stating that its software uses “near & far image data . . . to determine if the expected differences in perspective distortion are present in the image data” and, from that, “decides if there is sufficient evidence in the image data to conclude with a high degree [of] confidence that the image data contains first-generation biometric data captured in real-time from a live, physically present user.” Ex. 2067; see PO Resp. 25–26. As such, the 3D liveness checks provided by Patent Owner’s software are indicative of the unique characteristics of the claimed invention and, as we discuss below, certain objective indicia of nonobviousness have a direct nexus to the 3D liveness checks of its software.” slip op. at 30
Patent outcomesUS 11,157,606 not shown unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,157,606 - Jumio Corp. v. Facetec, Inc.No claims unpatentablePTAB · Jun 17, 2026 · IPR2025-00106 · APJ Nabeel U Khan · IPR · Final written decision
The Board determined claims 1–20 were not unpatentable because Jumio did not show sufficient motivation to combine the references or that they taught capturing images at different distances.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner argues Petitioner’s proffered level of skill is too broad with respect to work experience. PO Resp. 28. Patent Owner counters that a person having ordinary skill in the art would have had a Bachelor’s degree in electrical engineering, computer engineering, computer science, physics, or a related field, and two years’ work experience related to biometric security, facial authentication, and three-dimensional computer vision such that they would have had significant academic and/or work experience in both facial biometrics and computer vision. Id. at 28–29. Having considered the full record at trial, we maintain the preliminary finding regarding the level of ordinary skill in the art. See Inst. Dec. 11–12. In particular, based on the teachings of the ’471 patent and the asserted prior art, we are persuaded that an ordinarily skilled artisan would have had a work experience related to biometrics, facial authentication, computer vision, and/or optics as at least one of those fields is respectively implicated by the ’471 patent and the asserted prior at. Moreover, our decision would be the same under either proposed level of skill.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“that would be used to construe the claim in a civil action under 35 U.S.C. 282(b).” 37 C.F.R. § 42.100(b). Under the principles set forth by the Federal Circuit, the “words of a claim ‘are generally given their ordinary and customary meaning,’” as would be understood by a person of ordinary skill in the art at the time of the invention. Phillips v. AWH Corp., 415 F.3d 1303, 1312 (Fed. Cir. 2005) (en banc) (quoting Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996)). The parties do not dispute any claim terms or phrases and our decision does not require construing any particular claim terms or phrases, therefore, we do not expressly construe any particular claim term or phrase. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable
“We find that these reasons would not have adequately motivated a person having ordinary skill in the art to combine and modify the references in Petitioner’s asserted manner to reach the claimed features. Petitioner’s motivations—“substitution,” “obvious alternative . . . approaches,” “use of a known technique,” and “complimentary” techniques—are all similarly based on swapping or adding techniques for verifying three dimensionality. See Pet. 12–16; Pet. Reply 6–7. These motivations might have been suitable had Tanii described techniques for verifying three dimensionality, but Petitioner has not shown that Tanii describes any technique to verify three dimensionality. See Pet. 13–17, 25–28. Instead, as discussed above, Tanii describes the existence of the perspective distortion phenomenon and a technique for correcting it. As such, substituting the knowledge that perspective distortion exists and techniques to correct it does not correspond with approaches for verifying three-dimensionality, and so does not adequately motivate Petitioner’s combination. Put another way, because Tanii does not teach an approach for verifying three-dimensionality, Tanii’s techniques cannot be used as a substitute for approaches that do verify three dimensionality simply because Tanii discloses the concept of perspective distortion.” slip op. at 18
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“none of the relied upon references teach capturing two images at two different distances, as required by limitations 1[d3] and 1[d4]. These limitations recite “moving the camera from a first location to a second location, the second location being a second distance from the user” and “capturing at least one second image of the user taken with the camera of the computing device at the second distance from the user, the second distance being different than the first distance.” Derakhshani does not teach capturing a second image at a second distance from the user. Derakhshani teaches two different approaches: (1) focus-distance approach and (2) parallax approach. Petitioner acknowledges that the focus-distance approach does not expressly disclose capturing a second image at a second distance. Pet. 13 (distinguishing “focus distances” from “actual distances.”). This is because focus-distance, by definition, is not actual distance. Ex. 1005, 16:47–48 (“Focus distance is the distance from a sensor to a point in its field of view that is perfectly in focus.”) In Derakhshani’s focus-distance approach the camera stays the same distance from its subject—only the focus distance changes. Id. at 16:66–17:2 (“By comparing degree of focus for a landmark in images with different focus distances, the distance from the sensor to the landmark may be estimated.”) Derakhshani’s parallax approach also does not expressly disclose capturing a second image at a second distance. In the parallax approach the camera is rotated or slid about the user to create images with different perspectives. Ex. 1005, 17:59–64 (“In some implementations, the sensor is moved about the subject during image capture to collect image data from different orientations relative to the subject. For example, a single camera may be rotated or slid slightly or multiple cameras at different positions may be used for image capture.”). Rotating a camera around a user does not change the distance of the camera from the user. At the hearing Petitioner, instead, focused specifically on the use of the word “slid” in Derakhshani as indicating that Derakhshani takes a second image at a second distance. Tr. 16:9–12 (“[Petitioner’s Counsel: . . . Dr. Daft is talking about some of the terms that Derakhshani is using. For example, the term slid and shown in the images, he talks about how slid refers to the different distances between the sensor and the user.”). We determine that it is more likely that the word “slid,” as used in the relevant portion of Derakhshani, further describes the rotation of the camera about the user. Derakhshani indicates as much by describing that both rotating and sliding the camera are examples of how the camera sensor is “moved about the subject during image capture.” Derakhshani, 17:60–61. Thus, sliding the camera does not necessarily disclose moving the camera to a second distance from the subject.” slip op. at 27
Patent outcomesUS 10,776,471 not shown unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,776,471 - Innoscience America, Inc. v. Infineon Technologies Americas Corp.No claims unpatentablePTAB · Jun 12, 2026 · IPR2025-00094 · APJ Christopher M Kaiser · IPR · Final written decision
Claims 1–16 were not shown unpatentable under any asserted obviousness ground because Petitioner failed to establish the proposed modifications and combinations.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that one of ordinary skill in the art “would have possessed at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design.” Pet. 5 (citing Ex. 1003 ¶¶ 67–69). Petitioner also argues that “[a]dditional education could substitute for professional experience and vice versa.” Id. Patent Owner does not dispute Petitioner’s proposed level of ordinary skill. PO Resp. 1–76. Neither party explains why the outcome of this case would be affected by the adoption of the proffered definition of a person of ordinary skill in the art. Accordingly, and because it appears to be consistent with the ’003 patent and the asserted prior art, we adopt Petitioner’s assessment of the level of ordinary skill in the art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Neither party proposes construing any claim terms. Pet. 6; Prelim. Resp. 1–76. In addition, as discussed below, we are able to determine the outcome of this proceeding without expressly construing any terms. Thus, we do not construe any terms for the purposes of this Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 8
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“challenged claim. Unigene Labs., Inc. v. Apotex, Inc., 655 F.3d 1352, 1360 (Fed. Cir. 2011). “This is so because inventions in most, if not all, instances rely upon building blocks long since uncovered, and claimed discoveries almost of necessity will be combinations of what, in some sense, is already known.” KSR, 550 U.S. at 418–419. On the other hand, an obviousness analysis “need not seek out precise teachings directed to the specific subject matter of the challenged claim, for a court can take account of the inferences and creative steps that a person of ordinary skill in the art would employ.” Id. at 418; accord In re Translogic Tech., Inc., 504 F.3d 1249, 1259 (Fed. Cir. 2007). However, a petitioner cannot satisfy its burden of proving obviousness by employing “mere conclusory statements.” In re Magnum Oil Tools Int’l, Ltd., 829 F.3d 1364, 1380 (Fed. Cir. 2016). Instead, a petitioner must articulate a reason why a person of ordinary skill in the art would have combined or modified the prior art references. In re NuVasive, Inc., 842 F.3d 1376, 1382 (Fed. Cir. 2016); see also Metalcraft of Mayville, Inc. v. The Toro Co., 848 F.3d 1358, 1366 (Fed. Cir. 2017) (“In determining whether there would have been a motivation to combine prior art references to arrive at the claimed invention, it is insufficient to simply conclude the combination would have been obvious without identifying any reason why a person of skill in the art would have made the combination.”); Belden Inc. v. Berk-Tek LLC, 805 F.3d 1064, 1073 (Fed. Cir. 2015) (“[O]bviousness concerns whether a skilled artisan not only could have made but would have been motivated to make the combinations or modifications of prior art to arrive at the claimed invention.”) (citing InTouch Techs., Inc. v. VGO Commc’ns, Inc., 751 F.3d 1327, 1352 (Fed. Cir. 2014)). In arguing for the obviousness of claim 1 over the combination of Bonn and Mizuta, Petitioner argues that a person of ordinary skill in the art would have modified Bonn to perform high-frequency signal amplification. Pet. 19–25. In particular, Petitioner argues that a person of ordinary skill in the art “would have found it obvious to modify the circuit of Figure 1 [of Bonn] and use Figure 7’s structure for high frequency signal amplification in place of mixer 40,” followed by additional modifications to the circuit of Figure 1. Id. at 22–25. These additional modifications include removing LO port 55, removing FET 20 (along with voltage source 80, capacitors 16, 26, and 34, resistor 18, and inductors 22 and 24), removing capacitor 34 and shorting gate structure 324 to ground, and removing resistors 46 and 48 and shorting terminal 51 to ground. Id. According to Petitioner, the motivation for these modifications was that “Bonn . . . teaches using its dual gate structures for signal amplification without signal mixing.” Id. at 22 (citing Ex. 1006, 11:26–37). On the record developed at trial, we disagree. Bonn does, as Petitioner argues, teach that “the dual gate FET structure of the present invention can be tailored to provide superior performance over the prior art dual gate FET structures in high frequency signal mixing as well as other applications such as high frequency signal amplification.” Ex. 1006, 11:33–37. But the tailoring that Bonn refers to relates to changes to the structure of the field-effect transistor itself, not to the circuitry surrounding that transistor. Id. (teaching that the reason that “the dual gate FET structure of the present invention can be tailored” is that “the parameters such as gate width, dopant concentration, and channel depth, under each gate of the dual gate FET are individually adjusted for optimum performance”). Thus, although Bonn might have motivated a person of ordinary skill in the art to have made changes to the dual-gate FET itself, we are not persuaded that it would have motivated the additional changes to the circuit of Bonn’s Figure 1.” slip op. at 11
- Strike new argumentNew argument disregardedDecided for patent owner
“Mishra’s Figure 5 is a second gate in favor of a new position. Petitioner’s new argument is that a person of ordinary skill in the art would have found it obvious to connect the field plate of Mishra’s Figure 5 to the source instead of the gate, converting the field plate into a second gate. Compare Pet. 83 (equating “drain side gate” with “field plate 66, Figure 5”), 86–88 (identifying field plate 66 as a “second gate”), with Reply 21–22 (identifying only the embodiment of Mishra’s Figure 10 as a source-connected field plate), 22–23 (arguing that Mishra teaches that the Figure 5 embodiment “could be arranged as ‘a single transistor with a dual gate structure’”). Although “the introduction of new evidence in the course of the trial is to be expected in inter partes review trial proceedings,” Genzyme Therapeutic Prods. LP v. Biomarin Pharm. Inc., 825 F.3d 1360, 1366 (Fed. Cir. 2016), the shifting of arguments is not, Wasica Fin. GmbH v. Cont’l Auto. Sys., Inc., 853 F.3d 1272, 1286 (Fed. Cir. 2017). Accordingly, Petitioner’s change of arguments here is inappropriate. Moreover, even if we were to consider Petitioner’s inappropriate new argument, we would conclude that Petitioner does not support the argument with sufficient evidence. “Whether [an obviousness ground] is based on combining disclosures from multiple references, combining multiple embodiments from a single reference, or selecting from large lists of elements in a single reference, there must be a motivation to make the combination and a reasonable expectation that such a combination would be successful, otherwise a skilled artisan would not arrive at the claimed combination.” In re Stepan, 868 F.3d 1342, 1346 n.1 (Fed. Cir. 2017). Petitioner’s new argument relies on a person of ordinary skill in the art modifying the Figure 5 embodiment of Mishra to connect the field plate to the source rather than the gate. Reply 21–24. Petitioner does not, however, show that a person of ordinary skill in the art would have had a motivation to make this modification or a reasonable expectation that this combination would be successful. Id. Petitioner argues instead that “[n]o ‘reason’ is needed.” Id. at 24. Thus, Petitioner does not show by a preponderance of the evidence that claim 1 would have been obvious over the combination of Mishra and Ren.” slip op. at 19
Patent outcomesUS 8,264,003 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,264,003 - Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.No claims unpatentablePTAB · Jun 9, 2026 · IPR2025-00321 · APJ Christopher M Kaiser · IPR · Final written decision
The Board held claims 1, 2, 5–7, 9, 16, and 17 not unpatentable because the asserted combinations did not establish the required purge-tower teachings or prior-art status.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that one of ordinary skill in the art “would have had (1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶¶ 14–16). Petitioner also argues that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 24. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther
“According to the ’713 patent, “[p]urge tower 24 itself may be . . . recycled or otherwise discarded as desired.” Ex. 1001, 8:27–28. This description provides some support for Patent Owner’s view, because a purge tower too intimately integrated with the part would be difficult or impossible to recycle or discard. This is further supported by the ’713 patent’s statement that “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Id. at 8:30–34. It also is supported by Dr. Hickner’s testimony that the ’713 patent “clearly shows . . . the 24 purge tower separated from the part” and that “the purge tower is a separate physical object.” Ex. 2016, 28:8–10, 64:1–9. On the other hand, there is evidence supporting Petitioner’s view that, as long as the purge tower is generally separate from the part and the support structure, it may still make contact with those portions of the print. As noted above, “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Ex. 1001, 8:30–34. This language does not exclude locations adjacent to or in contact with the part or the support structure. Thus, determine that a “purge tower,” as that term is used in the context of the ’713 patent, may not be an integrated portion of a printed part or support structure but need not be free of all contact with the printed part or support structure.” slip op. at 9
- BurdenNot shown unpatentable
“There is evidence of record to support both Petitioner’s view and Patent Owner’s view. On the record developed at trial, however, we cannot say that the preponderance of the evidence favors Petitioner, who bears the burden of proof. See 35 U.S.C. § 316(e). Accordingly, Petitioner has not shown by a preponderance of the evidence that KISSlicer teaches printing a layer of a purge tower each time the printer switches one extruder to the operating mode. Because proving the obviousness of claims 1 and 16 requires such a showing, Petitioner has not shown by a preponderance of the evidence that claims 1 and 16 would have been obvious over the combination of Priedeman and KISSlicer. 5. Analysis of Remaining Claims Claims 2, 6, 7, 9, and 17 all depend, directly or indirectly, from claim 1 or claim 16. Accordingly, they all include the limitations of either claim 1 or claim 16. Because, as discussed above, Petitioner has not shown that the combination of Priedeman and KISSlicer teaches or suggests all the limitations of claims 1 and 16, Petitioner also has not proven by a preponderance of the evidence that claims 2, 6, 7, 9, and 17 would have been obvious over that combination of references.” slip op. at 21
- Obviousness (§103) › Analogous artAnalogous artOther
“On the record developed at trial, we agree with Petitioner. According to several industry forum posts, people interested in three-dimensional printing located the website where KISSlicer was posted between February 2012 and April 2012. Ex. 1028, 1 (post discussing and directing others to KISSlicer on April 11, 2012); Ex. 1031, 1 (two posts discussing KISSlicer on March 16, 2012, and March 21, 2012); Ex. 1032, 1 (two posts discussing KISSlicer on February 11, 2012, and February 14, 2012). Thus, not only was it possible for people of ordinary skill in the art to locate KISSlicer; people of ordinary skill in the art actually did locate it. Accordingly, Petitioner has shown by a preponderance of the evidence that KISSlicer was publicly accessible.” slip op. at 19
Patent outcomesUS 9,421,713 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,421,713 - Dr. Squatch, LLC v. The Procter & Gamble CompanyAll claims unpatentablePTAB · Jan 28, 2026 · IPR2024-01174 · APJ Susan L C Mitchell · IPR · Final written decision
Claims 1–8 and 10–23 are unpatentable: the Board found claims 1–15 anticipated or obvious over the asserted grounds and claims 16–23 obvious over the Native combination.
RulingsFinal written decision- Expert testimonyPetitioner expert creditedPatent owner expert discountedOther
“argument that the prior art fails to enable a stable deodorant stick. Rather, we are persuaded by Petitioner that Lesniak sufficiently teaches compositions with the relevant ingredients and achieves stable compositions through the use of a second wax having a melting point of 73 to 90° C. Reply 6–7 (citing Ex. 1003, 1:39–54). For example, Lesniak’s compositions (nos. 8 and 11) that used such a second wax, namely CastorWax MP80, are disclosed as sufficiently stable. Ex. 1003, Table 2. Here, we further credit the testimony of Dr. Michniak-Kohn that Lesniak teaches how to make stable compositions by including a secondary wax, such as castor wax, with a sufficiently high melting point. Ex. 1003, 1:39-54, 5:23-32, Table 2. Both of the compositions (nos. 8 and 11) tested by Lesniak that had such a wax passed the stability tests. Id. Ex. 1086 ¶ 7; see also Reply 6 (“Lesniak overcame any stability issues, as it expressly discloses compositions that are ‘physically stable at high and low temperatures.’”) (citing Ex. 1003, 5:23–32).” slip op. at 22
- Skill levelSkill level petitioner adoptedOther
“Petitioner proposes that a person of ordinary skill in the art (“POSA” or “POSITA”) at the time of the invention “would have (1) at least a B.S. or equivalent degree; and (2) at least two years of experience in cosmetics formulations.” Pet. 17 (citing Ex. 1002 ¶¶ 27–29). Patent Owner does not dispute Petitioner’s proposal about the POSA’s qualifications at this stage of the proceeding. PO Resp. 10. For this Decision, we adopt and apply Petitioner’s proposal above, which does not appear to be inconsistent with the level of skill reflected in the asserted prior art.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Preamble limiting or notPreamble limitingDecided for patent owner
“Patent Owner asserts that the preamble of independent claim 1, 16, and 20 reciting “a deodorant stick” is limiting” as it provides antecedent basis for the recitation of “said deodorant stick being free of an aluminum salt” for each independent claim. PO Resp. 7–10. Patent Owner also points to dependent claims 6–9 as relying on the preamble reciting “a deodorant stick” as antecedent basis for claim elements. Id. at 9. We agree. Petitioner does not provide argument to the contrary. See, e.g., Pet. 19 (arguing that Lesniak discloses a deodorant stick in the form of an antiperspirant stick). We determine that no express construction of any claim term is necessary to determine whether to institute inter partes review. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). To the extent further discussion of the meaning any claim term is necessary to our decision, we provide that discussion below in our analysis of the asserted grounds of unpatentability.” slip op. at 8
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“We find that the evidence of record fails to support Patent Owner’s argument that the prior art fails to enable a stable deodorant stick. Rather, we are persuaded by Petitioner that Lesniak sufficiently teaches compositions with the relevant ingredients and achieves stable compositions through the use of a second wax having a melting point of 73 to 90° C. Reply 6–7 (citing Ex. 1003, 1:39–54). For example, Lesniak’s compositions (nos. 8 and 11) that used such a second wax, namely CastorWax MP80, are disclosed as sufficiently stable. Ex. 1003, Table 2. Here, we further credit the testimony of Dr. Michniak-Kohn that Lesniak teaches how to make stable compositions by including a secondary wax, such as castor wax, with a sufficiently high melting point. Ex. 1003, 1:39-54, 5:23-32, Table 2. Both of the compositions (nos. 8 and 11) tested by Lesniak that had such a wax passed the stability tests. Id. Ex. 1086 ¶ 7; see also Reply 6 (“Lesniak overcame any stability issues, as it expressly discloses compositions that are ‘physically stable at high and low temperatures.’”) (citing Ex. 1003, 5:23–32). Having considered the parties’ positions and evidence of record, summarized above, we determine that Lesniak provides sufficient disclosure to enable a person of ordinary skill in the art to formulate deodorant stick within the parameters of claim 1. Therefore, for the reasons discussed above, we conclude that Petitioner has proved by a preponderance of evidence that Lesniak anticipates claim 1.” slip op. at 22
Patent outcomesUS 11,497,706 unpatentableClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 11,497,706 - Samsung Display Co., Ltd. v. Pictiva Displays International Ltd.Some claims unpatentablePTAB · Jan 22, 2026 · IPR2024-01094 · APJ Grace Karaffa Obermann · IPR · Final written decision
Claims 1, 2, 6, and 8–14 are unpatentable as obvious over Ma; claims 3 and 4 were not shown unpatentable over Werner.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends: A person of ordinary skill in the art (“POSA”) at the time of the alleged invention of the ’223 patent would have had a university degree in chemistry and additional expertise or a second university degree in the field of electrical engineering, particularly optoelectronics, or alternatively a university degree in electrical engineering and additional expertise or a second university degree in the field of chemistry. The person of ordinary skill in the art has spent several years studying the structure and function of organic optoelectronic components, in particular OLEDs, and has detailed knowledge of the chemical structure of light-emitting organic layers and the transport of charge carriers to these layers. In this respect, the person of ordinary skill in the art works at the interface between electrical engineering/physics (charge carrier transport and light emission processes in optoelectronic components) and chemistry, in particular organic chemistry (materials and layer stack combinations suitable). Pet. 14 (citing Ex. 1003 ¶¶ 46–47). Patent Owner does not dispute Petitioner’s contention. See generally Resp. Neither party indicates that the result would change depending on the definition selected. We adopt Petitioner’s uncontested proposed definition, because it is consistent with the disclosures of the asserted prior art references. See Ex. 1005, (code 57); Ex. 1007, 8107 (abstracts of the references asserted in the patentability challenges).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under that standard, claim terms generally are given their plain and ordinary meaning as would have been understood by the ordinarily skilled artisan at the time of the invention and within the context of the entire patent disclosure. See Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). We construe claim terms only as relevant to the parties’ contentions and only to the extent necessary to resolve the issues in dispute. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999); Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017). Neither party indicates that an express construction for any claim term is necessary to resolve the disputes at hand. Pet. 15; see generally Resp. On this record, we determine that no claim term requires express construction for purposes of this Decision. In our analysis of the challenges, however, we discuss the meaning of the terms “metal complex” and “central metal atom,” which appear in claim 1 (Ex. 1001, 19:19–20) to the extent necessary to resolve Patent Owner’s contention that Petitioner fails to establish that Ma invalidates claim 1. See Resp. 53, 56–58.” slip op. at 9
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“Whether Ma qualifies as a “printed publication” involves an inquiry into the facts and circumstances surrounding the reference’s disclosure to members of the public. In re Klopfenstein, 380 F.3d 1345, 1350 (Fed. Cir. 2004). A reference is considered “publicly accessible” upon a satisfactory showing that the document has been “disseminated or otherwise made available to the extent that persons interested and ordinarily skilled in the subject matter or art exercising reasonable diligence[] can locate it.” Kyocera Wireless Corp. v. ITC, 545 F.3d 1340, 1350 (Fed. Cir. 2008); see Hulu, LLC v. Sound View Innovations, LLC, IPR2018-01039, Paper 29, 10– 11 (PTAB Dec. 20, 2019) (precedential).” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“Based on the information presented, we find Petitioner has the better position. Patent Owner admits that joint vaporization means “two materials vaporize together.” Reply 21 (quoting Resp. 54). As Petitioner argues, “This is what Ma discloses.” Id. We agree with Petitioner that Ma describes a “two-component” electron transport layer having a “thickness with one value.” Id.; see Ex. 1007, 811 (reporting a “co-deposited” application of “BPhen:LiQ” that is “50 nm thick”). Ma’s disclosure, thereby, strongly “indicates that the two components were vaporized together––as opposed to creating a ‘macroscopically homogenous form’” prepared by sequentially vaporizing the individual components as Patent Owner “hypothesizes.” Reply 21 (citing Ex. 1020 ¶¶ 42–44; Ex. 2041 ¶¶ 155–157); see Resp. 54– 55; see also Ex. 1007, 811 (Ma’s description of its device fabrication, appearing in the third paragraph of the experiments section). Petitioner further advances evidence that “[p]reparing a layer that is ‘macroscopically homogeneous’ but potentially microscopically heterogeneous,” as Patent Owner postulates, “would introduce excessive variability and render the data noncomparable and unreliable, thus undermining the experiment’s purpose.” Reply 21 (citing Ex. 1020 ¶ 44); see Resp. 54–55. Patent Owner presents no counterargument or evidence that is persuasive to undercut Petitioner’s reasoning or evidence on that point. See Sur-reply 19–22. Petitioner also argues that an ordinarily skilled artisan would have recognized “that vaporizing materials together would best achieve Ma’s objective of assessing the current density using different Liq doping percentages.” Reply 22 (citing Ex. 1007, 811; Ex. 1020 ¶ 51). Here again, Petitioner’s evidence on point stands uncontested. See Sur-reply 19–22 (declining to contest that point). On this record, therefore, we agree with Petitioner that, as to the relevant disclosure in Ma, “the most natural interpretation of ‘co-deposition’ for forming a layer, particularly when there is nothing to indicate that the materials” are “vaporized sequentially,” is that the materials are co-deposited by joint vaporization. Reply 22 (citing Ex. 1020 ¶ 46–51). We further agree that, “[u]nder a preponderance standard, Ma’s disclosures are sufficient to render joint vaporization at least obvious.” Id. For the above reasons, we determine that Petitioner demonstrates by a preponderance of the evidence that Ma discloses joint vaporization as required by the challenged claims.” slip op. at 15
Patent outcomesUS 8,558,223 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 8,558,223 - PTAB · Dec 12, 2025 · IPR2025-01116 · APJ Christopher M Kaiser · IPR · Institution
The Board instituted IPR of claims 1–15 on all asserted grounds, finding a reasonable likelihood that claim 1 would have been obvious over Sudre, Lee, and Penven.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“determine whether to institute an inter partes review under 35 U.S.C. § 314 and 37 C.F.R. § 42.4(a). Inter partes review may not be instituted unless “the information presented in the petition filed under [35 U.S.C.] section 311 and any response filed under [35 U.S.C.] section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). “When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.” 37 C.F.R. § 42.108(a) (2023). In other words, a decision to institute under § 314 may not institute on fewer than all claims challenged in the petition. SAS Inst., Inc. v. Iancu, 138 S. Ct. 1348, 1359–60 (2018). In addition, if the Board institutes trial, it will “institute . . . on all grounds in the petition.” PTAB Consolidated Trial Practice Guide, 5–6 (Nov. 2019)1 (“CTPG”); see also PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (interpreting the statute to require “a simple yes-” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“had at least (1) a Bachelor’s Degree (or higher) in material science, materials engineering, mechanical engineering, textile engineering, or a related field, and (2) a minimum of two years of working experience in textiles engineering, fibers and textiles manufacturing, or a related field.” Pet. 4 (citing Ex. 1003 ¶¶ 21–22). Petitioner also argues that “[a]dditional education could substitute for professional experience, and vice versa.” Id. On the present record, Patent Owner does not contest Petitioner’s proposed level of ordinary skill. Prelim. Resp. 25–26. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’566 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Both parties argue that no claim terms require express construction at this stage of the proceeding. Pet. 3; Prelim. Resp. 26. On the present record, we agree. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). To the extent the parties’ arguments regarding unpatentability do address claim construction issues, we address these issues below.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“articulated a reason why a person of ordinary skill in the art would have combined the teachings of Sudre, Lee, and Penven. Prelim. Resp. 60–63. In particular, Patent Owner argues that a person of ordinary skill in the art “would not have been motivated to look into Penven to modify the teachings of Lee because Lee and Penven disclose substantially different structures.” Id. at 60–61. This argument does not address Petitioner’s proposed reason to combine, which looks to Lee and Penven each to modify Sudre, not to Penven to modify Lee. See Pet. 79–81. In addition, “[c]ombining the teachings of references does not involve an ability to combine their specific structures.” In re Nievelt, 482 F.2d 965, 968 (CCPA 1973). In other words, “[t]he test for obviousness is not whether the features of a secondary reference may be bodily incorporated into the structure of the primary reference . . . . Rather, the test is what the combined teachings of the references would have suggested to those of ordinary skill in the art.” In re Keller, 642 F.2d 413, 425–26 (CCPA 1981). Petitioner provides “some articulated reasoning with some rational underpinning” to combine the teachings of Sudre with those of Lee and Penven. KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 418 (2007). In particular, Petitioner directs us to Sudre’s teaching of “a method for manufacturing PMC,” to Sudre’s lack of teaching of “specific parameters, such as warp thread size and spacing” to satisfy the “particular requirements” of its fabric. Pet. 79 (citing Ex. 1003 ¶¶ 248–250; Ex. 1004, 1:2–5, 6:14–17). As Petitioner points out, id. at 79–80, Lee and Penven provided yarn diameters and loop diameters that were conventional, and there is evidence of record that a person of ordinary skill in the art would have used these conventional diameters in constructing Sudre’s paper machine clothing. Ex. 1003 ¶¶ 258–261, 263–266; Ex. 1006, 3:64–66.” slip op. at 14
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,261,566 - Boe Technology Group Co., Ltd. v. 138 East LCD Advancements LimitedSome claims unpatentablePTAB · Dec 1, 2025 · IPR2024-00973 · APJ George R Hoskins · IPR · Final written decision
Claims 1, 3–7, 9–13, and 15–18 are unpatentable as obvious over Reiner and over Reiner with Takahara; claims 2, 8, and 14 were not shown unpatentable.
RulingsFinal written decision- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed
“patentability based solely on arguments considered above in the context of claim 4. See, e.g., PO Resp. 42–43, 47–52. Therefore, Patent Owner has waived any other argument. See Inst. Dec. 44; Paper 10, 10. We adopt Petitioner’s arguments concerning these claims having been obvious over Reiner as our own in this Decision. See Pet. 40–44, 50–56, 57–70, 71; Ex. 1003 ¶¶ 134–142, 154–168, 174–221, 227. Accordingly, we conclude a preponderance of the evidence establishes these claims are unpatentable as having been obvious over Reiner.” slip op. at 83
- Expert testimonyOther
- Skill levelOther
Patent outcomesUS 9,184,157 mixed§ 103 obviousnesscites KSR · GrahamPatents in suitUS 9,184,157
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.