PTAB
Advanced fields
18 decisions · 522msnewest first
  • PTAB · Oct 14, 2025 · PGR2021-00054 · APJ Kristina M Kalan · PGR · Remand

    Claims 1–22 were not shown unpatentable because Sample C was not proven publicly available as prior art, and the original decision found the remaining grounds insufficient.

    RulingsRemand decision
    • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication not establishedNot shown unpatentable

      “We agree with Patent Owner that Petitioner’s evidence in Kuntz (Ex. 1026), the Annual Report (Ex. 1028), Masuko (Ex. 1029), and Pfaff (Ex. 1034) is insufficient to show that Xirallic® Sample C was available to the public before the effective filing date of the ’861 patent. Petitioner has not asserted, nor do we find, that any of these documents refer to or describe the lot of Xirallic® from which Sample C was taken. See Final Dec. 26. Kuntz, the Annual Report, Masuko, and Pfaff may support a finding that the Xirallic® line of products was available to the public, but these documents do not support a finding that the lot of Xirallic® from which Sample C was taken was available to the public. We also agree with Patent Owner that the Technical Data Sheets (Exs. 1005–1010), Certificates of Analysis (Exs. 1011–1017), and Material Safety Data Sheet (Ex. 1025) are insufficient to show that Xirallic® Sample C was available to the public. Petitioner has not asserted, nor do we find, that any of these documents refer to or describe the lot of Xirallic® from which Sample C was taken. See Final Dec. 26–27. Regardless of how the Technical Data Sheets were used in the Opposition against the European counterpart of the ’861 patent (Exs. 1040, 1041) and during the prosecution of the application from which the ’861 patent issued (Ex. 1003, 102–104), the Technical Data Sheets do not refer to or describe the lot of Xirallic® from which Sample C was taken. Moreover, as noted by Patent Owner, the Technical Data Sheets (Exs. 1005–1010) indicate that they are “preliminary” and Petitioner has not provided any evidence that the Technical Data Sheets were ever issued to the public, as opposed to just issued internally. See PO Resp. 18–19. We also find persuasive Patent Owner’s argument that the Technical Data Sheets are preliminary because other, later-dated technical data sheets (Exs. 2012, 2013) lack the “preliminary” label and list characteristics that are different from those in Exhibits 1005–1010. See PO Resp. 19 (comparing, e.g., Ex. 1009 and Ex. 2013; Ex. 1005 and Ex. 2012). The Technical Data Sheets may support a finding that the Xirallic® products they describe existed as of the dates on the documents, but they do not support a finding that the lot of Xirallic® from which Sample C was taken was available to the public.” slip op. at 20

    • Expert testimonyPetitioner expert discountedPatent owner expert creditedOther

      “witnesses. See Elbit Systems of Am., LLC v. Thales Visionix, Inc., 881 F.3d 1354, 1358 (Fed. Cir. 2018) (citing Trs. of Columbia Univ. v. Illumina, Inc., 620 F. App’x 916, 922 (Fed. Cir. 2015); Inwood Labs., Inc. v. Ives Labs., Inc., 456 U.S. 844, 856 (1982)). We have reviewed the witness testimony in the record and, more particularly, Mr. Choi’s deposition answers regarding Petitioner’s purchase of the lot of Xirallic® from which Sample C came. We find that Mr. Choi’s responses cast doubt on the credibility of his declaration testimony, namely with regard to the public availability of Sample C. Mr. Choi represented that he was involved in the purchase of the lot of Xirallic® from which Sample C was taken. Ex. 2011, 48:1–23. Mr. Choi stated that he instructed Petitioner’s marketing team manager to buy the sample from a distributor of Patent Owner’s products located in Europe. Id. at 48:24–49:4. Mr. Choi stated that he has evidence of the transaction, but refused to reveal the name of the company from which Petitioner purportedly purchased the lot of Xirallic® (id. at 49:5–50:3) and refused to produce an email in his possession that would corroborate his testimony regarding Petitioner’s acquisition of the product (id. at 50:8–16, 51:10–23). Mr. Choi represented that he does not remember how much Petitioner paid for Sample B. Id. at 56:4–5. Mr. Choi admitted that the entity from which Petitioner acquired the lot of Xirallic® from which Sample C was taken is “not currently a Merck distributor” (Ex. 2011, 50:4–7) and was not “a Merck distributor at the time” that “samples B and C were purchased” (id. at 51:25–52:2). According to Mr. Choi, the company is a “former distributor” of Patent Owner’s products. Id. at 52:3–6. Mr. Choi did not know, according to his testimony, when that unnamed entity first obtained the lot of Xirallic® (id. at 52:7–10) and he stated that he did not have personal knowledge of how the entity obtained the lot of Xirallic® (id. at 52:12–19). Instead, Mr. Choi assumed the entity was “able to obtain the sample through the routine course or process” the entity uses “to take samples or get samples.” Id. at 52:12–19. Mr. Choi believed the sample of Xirallic® from which Sample C was taken was sealed when Petitioner received it because samples from dealers are sealed, and he remembered observing that the package was from a dealer. Id. at 52:24– 54:25. However, Mr. Choi admitted that he did not obtain a technical data sheet or certificate of analysis for the lot of Xirallic® from which Samples B and C were taken. Id. at 59:6–11. Mr. Choi also answered questions regarding Petitioner’s purchase of Samples D and H. Ex. 2011, 62:20–66:8, 67:7–9, 73:12–13, 73:17–22. Similar to his testimony regarding Samples B and C, Mr. Choi admitted withholding an email regarding the purchase of the lot of Xirallic® from which Sample D was taken. Id. at 62:20–63:9. Mr. Choi also admitted that he did not know how Akzo USA or Axalta obtained the Xirallic® the companies sold to him, and admitted that Akzo USA was not a distributor of Patent Owner’s products at the time Petitioner purchased the product. Id. at 63:10–66:8, 73:17–22. Mr. Choi also admitted that Petitioner did not pay Akzo USA for the lot of Xirallic® from which Sample D was taken, and did not pay Axalta for the lot of Xirallic® from which Sample H was taken. Id. at 67:7–9, 73:12–13. Although Petitioner presents declaration testimony from Mr. Choi representing that he purchased the lot of Xirallic® from which Samples B and C were taken in October 2011 (Ex. 1004 ¶ 16), Mr. Choi’s declaration testimony lacks corroborating evidence, and his deposition testimony does not support that the product was available to the public, as we found in our Final Written Decision. See Final Dec. 27–28. Notably, Petitioner produced corroborating evidence for Mr. Choi’s acquisition of Samples A, H, and I. See Ex. 1004 ¶¶ 13 (citing Ex. 1047), 18 (citing Exs. 1024, 1025). However, Mr. Choi withheld similar evidence for the Xirallic® lots from which Samples B, C, and D were taken. See Ex. 2011, 50:8–16, 51:10–23, 62:20– 63:9; Final Dec. 28. As Patent Owner argues, there is “no information to determine when a contract was established, that there was consideration for the exchange, that the product was available to be delivered when the alleged transaction took place, or even when the product was delivered. Choi has no memory of what was paid for the product.” Sur-Reply 24–25; see also PO Resp. 13–14; PO Br. Rem. 2–4.” slip op. at 34

    • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

      “Based on the evidence discussed above, we are not persuaded that Petitioner has shown by a preponderance of the evidence that Sample C was available to the public. Regardless of whether a company avoids wasting shelf life of its products (Ex. 1004 ¶¶ 15–16), there is no persuasive evidence in the record showing that the lot of Xirallic® from which Sample C was taken was released from quality control and then made available to the public by Patent Owner. Mr. Choi’s testimony shows that Petitioner obtained the lot of Xirallic® from which Sample C was taken in an atypical manner (i.e., not from Patent Owner or one of Patent Owner’s current distributors) (Ex. 2011, 49:5–50:7, 50:8–16, 51:10–23, 51:25–52:6, 52:12– 19), and there is no evidence in the record to show that the lot of Xirallic® was intended for sale, rather than for experimental use only or for some other restricted use. Accordingly, we determine Petitioner has not demonstrated by a preponderance of the evidence that Sample C qualifies as prior art against the ’861 patent, and we determine that Petitioner has not shown by a preponderance of the evidence that the ’861 patent is unpatentable over the grounds relying on Sample C.” slip op. at 38

    Patent outcomesUS 10,647,861 not shown unpatentable
    § 102 anticipation§ 103 obviousness
    Patents in suitUS 10,647,861
  • PTAB · Mar 25, 2025 · IPR2023-01382 · APJ Kimberly Mcgraw · IPR · Final written decision

    Claims 1–3 were not shown unpatentable under any of five § 103 grounds because Petitioner failed to establish sufficient motivation to modify or combine the prior art.

    RulingsFinal written decision
    • BurdenNot shown unpatentable

      “A petition must identify “with particularity . . . the evidence that supports the grounds for the challenge to each claim.” 35 U.S.C. § 312(a)(3) Here, Petitioner merely provides general assertions about multiple references, without clearly identifying how, or why a POSITA would have been motivated, to modify the processes disclosed in those references to arrive at the claimed invention. Thus, the Petition does not state with particularity that Saxler’s particular technique for etching is to be used instead of Beach’s etching step when substituting Beach’s self-aligned process for Saxler’s two mask process. Nor does the Petitioner provide a sufficient reason, absent hindsight, why a POSITA would have been motivated to combine the references to result in a process that forms Saxler’s Modified Figure 1A. Thus, for these additional reasons, Petitioner has not shown by a preponderance of the evidence that claim 1 would have been obvious over Saxler, Beach, and Shenoy.” slip op. at 34

    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “Both parties agree that the differences between the definitions do not impact the analysis. Resp. 11; Reply 2. In light of the record before us, and for purposes of this Decision, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’347 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand and implement the teachings of the ’347 patent and the prior art. We also note that our Decision would be the same under either parties’ definition.” slip op. at 13

    • Expert testimonyOther

      “Petitioner’s expert, Dr. Shealy states that he understands paragraph 52 to mean that it is “fair game to pull the recess out of any of those figures [Figures 1A through 6].” Ex. 2004, 39:12–21. Dr. Shealy, however, also clarifies that “[a]s I said before, I think you could take all the embodiments and bring in which ones you want, depending on what you’re trying to accomplish.” Ex. 2004, 40:24–41:1. During the hearing, Petitioner admitted that Dr. Shealy’s “statement to modify the reference depending on what you're trying to accomplish” means that “a POSITA may modify with reason to do so. A POSITA would have removed Saxler’s recess to obtain the benefits of enhancement-mode.” Tr. 19:19–25. Again, the Petition does not provide a reason why a POSITA would have removed Saxler’s gate recess.” slip op. at 28

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

      “remove the recess in Saxler Figure 1A to arrive at the allegedly enhancement mode transistor of Modified Figure 1A. Contrary to Petitioner’s assertions in its Reply and at the hearing, the Petition makes no argument that a POSITA would have removed the recess from Saxler Figure 1A to realize the benefits of an enhancement mode transistor. See Reply 4–5; Pet. 24–68. Rather, the Petition merely asserts that a POSITA would have understood that the gate recess of Figure 1A is optional without providing any persuasive reason why a POSITA would have removed the gate recess but retained the sloped sidewalls of Figure 1A. Pet. 25, 40, 45. For example, Petitioner asserts that Saxler’s gate contact may be “recessed or non-recessed” and that when the gate recess shown in Figure 1A is not utilized, Saxler would have the structure of Saxler Modified Figure 1A. Pet. 25 (citing Ex. 1003 ¶ 81; Ex. 1007 ¶ 52, 66); see also Pet. 40, 45 (citing Ex. 1007 ¶ 52). Neither of these paragraphs provide sufficient motivation to a POSITA to remove the gate recess from Saxler Figure 1A. Saxler paragraph 52 states: Exemplary devices according to some embodiments of the present invention are schematically illustrated in FIGS. 1A through 6. Thus, while embodiments of the present invention are described herein with reference to a recessed gate structure or a non-recessed gate structure, other embodiments of the present invention may include or not include a gate recess. Accordingly, embodiments of the present invention should not be construed as limited to the particular exemplary embodiments described herein but may include any suitable structure having a cap layer and/or passivation layer as described herein. Ex. 1007 ¶ 52. Petitioner’s expert, Dr. Shealy states that he understands paragraph 52 to mean that it is “fair game to pull the recess out of any of those figures [Figures 1A through 6].” Ex. 2004, 39:12–21. Dr. Shealy, however, also clarifies that “[a]s I said before, I think you could take all the embodiments and bring in which ones you want, depending on what you’re trying to accomplish.” Ex. 2004, 40:24–41:1. During the hearing, Petitioner admitted that Dr. Shealy’s “statement to modify the reference depending on what you're trying to accomplish” means that “a POSITA may modify with reason to do so. A POSITA would have removed Saxler’s recess to obtain the benefits of enhancement-mode.” Tr. 19:19–25. Again, the Petition does not provide a reason why a POSITA would have removed Saxler’s gate recess.” slip op. at 28

    Patent outcomesUS 9,748,347 not shown unpatentable
    § 103 obviousnesscites Phillips · KSR
    Patents in suitUS 9,748,347
  • Intel Corporation v. Besang Inc.No claims unpatentable
    PTAB · Dec 11, 2024 · IPR2023-00991 · APJ Jon B Tornquist · IPR · Final written decision

    The Board held claims 1 and 13–17 not unpatentable, finding the asserted obviousness grounds deficient in claim limitations or motivation to combine.

    RulingsFinal written decision
    • Skill levelSkill level patent owner adoptedDecided for patent owner

      “The parties proposed definitions differ in that Petitioner would permit a degree in “materials science” and require three years, as opposed to two years, of relevant experience. Compare Pet. 9 with PO Resp. 14. On this record, we adopt Patent Owner’s proposed definition, as it is more consistent with the prior art of record and the disclosures of the ’702 patent. We note, however, that neither party contends that the outcome of this case depends on the slight differences in the proposed definitions of a person of ordinary skill in the art.” slip op. at 9

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

      “1996) (“It is well-settled that, in interpreting an asserted claim, the court should look first to the intrinsic evidence of record, i.e., the patent itself, including the claims, the specification and, if in evidence, the prosecution history.”). Upon review of the parties’ arguments and the intrinsic record, we agree with Petitioner that the ’702 patent does not support a construction of “stackable add-on layer” that encompasses memory cells formed by sequential deposition on a substrate without being formed and then added to a separately formed substrate. Pet. 11–12. First, the plain language of the claim does not require merely a “layer” having a plurality of vertically oriented semiconductor memory cells, but rather “a stackable add-on layer” having a plurality of vertically oriented semiconductor memory cells; that plurality is bonded to the dielectric layer. Ex. 1001, 12:29–32. A construction that gives meaning to all words of the claim is preferred. Merck & Co., Inc. v. Teva Pharm. USA, Inc., 395 F.3d 1364, 1372 (Fed. Cir. 2005) (“A claim construction that gives meaning to all the terms of the claim is preferred over one that does not do so.”).” slip op. at 12

    • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

      “As discussed above, we do not understand a “stackable add-on layer” to include memory cells that are formed by sequential deposition on or above a substrate without being added to a separately formed substrate. It is undisputed, and indeed it is Petitioner’s assertion, that Lee’s memory devices are formed by sequential deposition. Pet. 16, 29 n.11, 51 (“In Lee, each level 3104 is deposited on the underlying level of array 3101.”). Therefore, Petitioner has not shown that Lee discloses every limitation of independent claim 13 under our claim construction. Thus, Petitioner does not demonstrate by a preponderance of the evidence that claim 13 would have been obvious in view of Lee. 3. Analysis: Claims 14–17 Claims 14–17 each depend, directly or indirectly, from claim 13. Petitioner’s arguments with respect to these claims do not remedy the deficiencies noted above with respect to claim 13. Pet. 31–41. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claims 14–17 would have been obvious over Lee.” slip op. at 19

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

      “We agree with Patent Owner that Petitioner has not demonstrated that Aspar would improve Lee, would solve a problem in Lee, and that Petitioner is proposing to use Aspar in a way that is not disclosed in the reference. PO Resp. 49–50 (citing Ex. 2029 ¶¶ 153–162); Tr. 57:24–58:12; Pet. 61; KSR, 550 U.S. at 417 (asking whether a technique “would improve similar devices in the same way”), 420 (asking whether there was a known problem in the art), 421 (asking whether one of ordinary skill in the art had reason to “pursue the known options”); Intel, 61 F.4th at 1381 (explaining that obviousness may be demonstrated by showing that there was a known problem in the art (“cache coherency in multiprocessor systems”) and that a person of ordinary skill in the art would recognize that that the prior art solution to this problem (“global segmented secondary cache”) would improve the system of another prior art reference). Petitioner does not persuasively show that there was any known problem in the art with respect to Lee or its monolithic method of constructing memory arrays. Nor does Petitioner provide persuasive argument or evidence that Aspar’s wafer bonding would improve Lee’s memory device.10 For example, Petitioner states in a conclusory fashion that Aspar would address the known problem of “fabricating 3D structures,” but does not explain what those problems were or why Lee fails to solve them. Pet. 61. Dr. Sechen’s testimony merely parrots the Petition, providing no further analysis or explanation of what problem might exist in Lee when fabricating its 3D structures. Ex. 1003 ¶ 212. The Petition notes that Aspar transfers “thin layers of very good thickness homogeneity and with a high crystalline quality,” but the Petition never asserts that Lee’s direct deposition method fails to provide these same or similar qualities. Pet. 60–61.” slip op. at 27

    Patent outcomesUS 7,378,702 not shown unpatentable
    Claim construction§ 103 obviousnesscites KSR · Graham
    Patents in suitUS 7,378,702
  • PTAB · Nov 13, 2024 · IPR2023-00900 · APJ Jon B Tornquist · IPR · Final written decision

    Claims 13–17 were not shown unpatentable: Lee-based grounds fail on the stackable add-on layer limitation, and Watanabe-based grounds fail on nonvolatile memory, enablement, or motivation to combine.

    RulingsFinal written decision
    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

      “meaning in the art. See Irdeto Access, Inc. v. Echostar Satellite Corp., 383 F.3d 1295, 1300 (Fed. Cir. 2004) (stating that, absent an accepted meaning in the art, “we construe a claim term only as broadly as provided for by the patent itself”). Thus, we must attempt to discern the meaning of this term from the claim language itself and from the remainder of the intrinsic record. See Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996) (“It is well-settled that, in interpreting an asserted claim, the court should look first to the intrinsic evidence of record, i.e., the patent itself, including the claims, the specification and, if in evidence, the prosecution history.”). Upon review of the parties’ arguments and the intrinsic record, we agree with Petitioner that the ’702 patent does not support a construction of “stackable add-on layer” that encompasses memory cells formed by sequential deposition on a substrate without being formed and then added to a separately formed substrate.” slip op. at 10

    • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

      “As discussed above, we construe “stackable add-on layer” to not include memory cells that are formed by sequential deposition on or above a substrate without being added to a separately formed substrate. It is undisputed, and indeed it is Petitioner’s assertion, that Lee’s memory devices are formed by sequential deposition. See Pet. 52 (asserting that in Lee “the layers of the array are directly deposited on the layers of each underlying level, and the array is deposited on the interlayer insulating layer formed over a substrate”); see also id. at 70 (“Lee discloses forming vertical memory devices through layer-by-layer sequential deposition on the substrate . . . .”). Therefore, Petitioner does not show that Lee discloses every limitation of independent claim 13 under our claim construction. Thus, Petitioner does not demonstrate by a preponderance of the evidence that claim 13 would have been obvious in view of Lee. 3. Claims 14 and 15 Claims 14 and 15 depend from claim 13. Ex. 1001, 12:35–42. Petitioner’s arguments for these claims do not remedy the deficiencies noted above with respect to independent claim 13. Pet. 54–59. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claims 14 and 15 would have been obvious in view of Lee alone. E. Claims 16 and 17 over Lee and Endoh Petitioner contends the subject matter of claims 16 and 17 would have been obvious over the combined disclosures of Lee and Endoh. Pet. 59–69. Petitioner’s arguments with respect to these claims, however, do not remedy the deficiencies noted above with respect to Lee and its monolithic, sequentially deposited memory array. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claims 16 and 17 would have been obvious over Lee and Endoh.” slip op. at 18

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

      “combined Lee and Watanabe to achieve improved integration density. Pet. 71. Petitioner concedes, however, that the benefits of Lee’s design related to 3-D integration and improved integration density would be obtained if Lee’s memory structures are formed using either Lee’s monolithic construction method or Watanabe’s alternative stacking method. Pet. Reply 13–14 (citing Ex. 1041 ¶ 34). Thus, we are not persuaded that improved integration density provides a sufficient rationale for Petitioner’s combination of Lee’s memory device and Watanabe’s stacking method. Petitioner argues that Watanabe’s stacking method “improves the accuracy of the wiring” because the wiring is made “for each planar member.” Pet. 72 (citing Ex. 1005, 6:1–3). Watanabe also states that its disclosed methods provide “a low interconnection wire resistance.” Ex. 1005, 6:20–23. Petitioner does not, however, explain sufficiently how Watanabe’s stacking method would improve Lee’s device. For example, Petitioner does not address whether the alleged wiring benefit already existed in Lee’s monolithic array or explain how this benefit would also apply to Lee’s particular memory array, which differs in construction and elements from Watanabe’s device. This diminishes Petitioner’s benefits-based motivation to combine arguments. In general, a petitioner need not demonstrate that a particular alternate method would improve a prior art device in order to show a motivation to combine. Intel Corp. v. PACT XPP Schweiz AG, 61 F.4th 1373, 1380–81 (Fed. Cir. 2023); see Pet. Reply 20 (citing Intel). But here, Petitioner affirmatively invokes improvement of Lee’s device as a reason for the combination, and we must evaluate Petitioner’s contention. Moreover, any relative lack of improvement or benefits must be weighed against any problems the alternative method would introduce. See Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 795–96 (Fed. Cir. 2021) (noting that simultaneous advantages and disadvantages to a proposed combination must be analyzed to determine whether the disadvantages “outweighed any reason to combine”). Here, as discussed above in more detail with respect to the ground based on Watanabe, the evidence shows that one of ordinary skill in the art would have expected Watanabe’s bonding temperature of 900– 1000° C to damage the electronic devices in an underlying substrate. Ex. 2029 ¶¶ 75–76; Ex. 2028, 123:13–124:7; Ex. 2027, 715. The expected damage to Lee’s device, when balanced against the limited evidence of a benefit to the combination,7 outweighs the reason to combine Lee and Watanabe set forth in the Petition. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claim 13 would have been obvious over Lee and Watanabe. 2. Analysis – Claims 14 and 15 Claims 14 and 15 both depend directly from independent claim 13. Ex. 1001, 12:35–42. Petitioner’s arguments with respect to claims 14 and 15 do not remedy the deficiencies noted above with respect to independent claim 13. Pet. 73. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that these claims would have been obvious over Lee and Watanabe.” slip op. at 40

    • Expert testimonyPatent owner expert creditedOther

      “We credit the testimony of Dr. Przybylski that one of ordinary skill in the art would have understood that Watanabe’s stacked structure would be severely impacted if bonded at a temperature above 900° C, as disclosed in Watanabe. Ex. 2029 ¶¶ 76–77. Dr. Przybylski’s opinion is supported by Dr. Lee’s testimony (Ex. 2028, 123:13–124:7, 125:6–126:7), as well as Watanabe (Ex. 1005, 6:6–14) and Batude (Ex. 2027, 715). As further discussed below, we find that Petitioner has not rebutted Patent Owner’s showing of nonenablement, and Patent Owner has carried its burden to demonstrate that Watanabe was not enabled for bonding temperatures of 900–1000° C, as of the 2004 filing date of the ’702 patent.” slip op. at 32

    Patent outcomesUS 7,378,702 not shown unpatentable
    Claim construction§ 103 obviousnesscites KSR · Graham
    Patents in suitUS 7,378,702
  • PTAB · Dec 12, 2022 · IPR2021-00862 · APJ Sheridan K Snedden · IPR · Final written decision

    Claims 1–24 were not shown unpatentable because Petitioner failed to establish the proposed prior-art combinations and the required motivation to combine with a reasonable expectation of success.

    RulingsFinal written decision
    • Skill levelSkill level board ownDecided for patent owner

      “The parties present compelling argument and evidence that one of ordinary skill in the art would include those with experience in ophthalmology, as well as in the research, manufacture, and design of medical optics or medical lasers. Pet. 25; PO Resp. 9–10. The evidence of record also demonstrates that few individuals actually had such comprehensive experience. Rather, teams of individuals with different expertise and various academic degrees (Ph.D.s, B.S.s, and M.D.s) would work together to design laser surgery systems intended to make incisions in the lens of the eye. See, e.g., Ex. 1041 (several authors are M.D.s); Ex. 1042 (the authors’ degrees include Ph.D.s, an M.D., and a B.S.); see also Ex. 1053; Ex. 1054; Ex. 1055; Ex. 2010; Ex. 2019. Thus, we find that the person of ordinary skill in the art would have been either an ophthalmic surgeon or someone with a Ph.D., M.S., or B.S. degree in physics, biomedical engineering, or a related science such as nuclear engineering, having experience in researching, manufacturing, or designing medical optics or medical lasers (e.g., five years of experience for a Ph.D. or more to compensate for lesser degrees), and that such persons would have worked in collaboration with one another to fill any necessary gaps in knowledge (e.g., the engineer would consult the medical doctor on clinical issues or physiology and the medical doctor would consult the engineer on technical issues). This definition marries the two proposed by the parties.” slip op. at 11

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “Petitioner does not assert that any claim term requires express construction. See Pet. 6 (stating that it “reserves the right to respond to any constructions that [Patent Owner] submits”). Patent Owner does not present any remarks regarding claim construction. See generally PO Resp. On this record, we determine that no claim terms require express construction because it is not essential to our conclusions on patentability. See Nidec Motor., 868 F.3d at 1017 (quoting Vivid Techs., 200 F.3d at 803 (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)). To the extent further discussion of the meaning of any claim term is necessary to our decision, we provide that discussion below in our analysis of the asserted grounds of unpatentability.” slip op. at 13

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundReasonable expectation not foundNot shown unpatentable

      “summarized above, we find that the evidence of record does not support a conclusion that it would have been simple, straightforward, or otherwise routine to convert Swinger’s manual HeNe aiming system and Swinger’s surgeon-identification-of-target-tissue step to a computer-controlled, OCT-guided laser system. Even assuming that a person of ordinary skill in the art would have combined the teachings of Swinger and Baikoff to achieve a laser surgical system incorporating an OCT imaging system, that combination still would not have achieved the required “computer system” of the claims and all of its programmed surgical functionality, particularly, using a computer system to construct an anterior capsulotomy cutting region based on the image data. Petitioner relies on the ability of a person of ordinary skill in the art to configure Swinger’s computer control unit with the missing functionality, thus necessitating an electronic conversion of the steps performed using Swinger’s direct visualization method using a HeNe aiming beam to manually identify a surgical treatment region for laser surgery. Ex. 1039, 34:52–57; Ex. 2088 ¶¶ 55–59, 66. That conversion, however, involves the incorporation of OCT imaging technology as the basis for a computer-controlled system to plan and then implement the planned cataract surgery, two technological leaps that the record fails to show were known or suggested. In particular, the evidence of record does not support a conclusion that OCT was a well-known system used routinely, if at all, in the identification of treatment regions in the lens or lens capsule for cataract surgery, and further does not support a conclusion that a computer-controlled system to plan and to implement a planned cataract surgery in the lens was commonplace or even considered before the invention.” slip op. at 25

    • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation not foundNot shown unpatentableNot shown unpatentable

      “The evidence of record demonstrates, however, that modifying an existing corneal surgery system to image and perform surgery on the lens was not the simple task asserted by Petitioner. For example, in a patent application filed in November 2009, Petitioner asserted that due to the different depth ranges for the laser’s focus, “laser systems designed for corneal procedures do not offer solution[s] for the considerable challenges of performing surgery on the lens of the eye.” Ex. 2007, 4:65–67, 5:30–36, code (22). Similarly, in a different patent filed in December 2008, Petitioner outlined the various challenges in developing laser surgery systems for creating incisions in the lens, including the difficulty in focusing a laser beam that propagates through regions of the eye with different optical properties and different curvatures. Ex. 2014, 15:51–16:18, code (22). This patent then states: Because of all the described hard challenges, corneal surgical laser systems are qualitatively simpler than lens surgical lasers. This is well supported by the fact that even though corneal surgical systems were suggested about 40 years ago, none have been adapted successfully for lens surgery to date. Id. at 16:13–18. During prosecution of another patent filed in 2008, and in responses to office actions filed in 2012 and 2013, Petitioner argued that a corneal OCT system “simply will not work” on the lens and that it would not have been obvious to modify such an OCT system to image the lens. Ex. 2015, 898, 1591, 1788. This was because OCT systems designed to image the lens would be required to deliver and scan an imaging beam “to a depth ten times bigger and a depth range ten times bigger” than an OCT system designed to image the cornea. Id. at 1591. According to Petitioner, “it is not obvious” to modify an OCT imaging system to achieve a depth and scanning range that is ten times larger than that disclosed in the art. Id. at 898 (“Increasing a system’s performance by an order of magnitude cannot be regarded as obvious.”), 1590–1591. Petitioner’s arguments presented in its own patents and during their” slip op. at 39

    Patent outcomesUS 8,709,001 not shown unpatentable
    Claim construction§ 103 obviousness
    Patents in suitUS 8,709,001
  • PTAB · Dec 12, 2022 · IPR2021-00858 · APJ Sheridan K Snedden · IPR · Final written decision

    Claims 1–19 were not shown unpatentable because Petitioner failed to establish that the asserted prior-art combinations would have been made with a reasonable expectation of success.

    RulingsFinal written decision
    • Skill levelSkill level board ownOther

      “The parties present compelling argument and evidence that one of ordinary skill in the art would include those with experience in ophthalmology, as well as in the research, manufacture, and design of medical optics or medical lasers. Pet. 26; PO Resp. 8–9. The evidence of record also demonstrates that few individuals actually had such comprehensive experience. Rather, teams of individuals with different expertise and various academic degrees (Ph.D.s, B.S.s, and M.D.s) would work together to design laser surgery systems intended to make incisions in the lens of the eye. See, e.g., Ex. 1041 (several authors are M.D.s); Ex. 1042 (the authors’ degrees include Ph.D.s, an M.D., and a B.S.); see also Ex. 1053; Ex. 1054; Ex. 1055; Ex. 2010; Ex. 2019. Thus, we find that the person of ordinary skill in the art would have been either an ophthalmic surgeon or someone with a Ph.D., M.S., or B.S. degree in physics, biomedical engineering, or a related science such as nuclear engineering, having experience in researching, manufacturing, or designing medical optics or medical lasers (e.g., five years of experience for a Ph.D. or more to compensate for lesser degrees), and that such persons would have worked in collaboration with one another to fill any necessary gaps in knowledge (e.g., the engineer would consult the medical doctor on clinical issues or physiology and the medical doctor would consult the engineer on technical issues). This definition marries the two proposed by the parties.” slip op. at 11

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “Petitioner does not assert that any claim term requires express construction. See Pet. 7 (stating that it “reserves the right to respond to any constructions that [Patent Owner] submits”). Patent Owner does not present any remarks regarding claim construction. See generally PO Resp. On this record, we determine that no claim terms require express construction because it is not essential to our conclusions on patentability. See Nidec Motor., 868 F.3d at 1017 (quoting Vivid Techs., 200 F.3d at 803 (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)). To the extent further discussion of the meaning of any claim term is necessary to our decision, we provide that discussion below in our analysis of the asserted grounds of unpatentability.” slip op. at 13

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundReasonable expectation not foundNot shown unpatentable

      “Having considered the parties’ positions and evidence of record, summarized above, we find that the evidence of record does not support a conclusion that it would have been simple, straightforward, or otherwise routine to convert Swinger’s manual HeNe aiming system and Swinger’s surgeon-identification-of-target-tissue step to a computer-controlled, OCTguided laser system. Even assuming that a person of ordinary skill in the art would have combined the teachings of Swinger and Baikoff to achieve a laser surgical system incorporating an OCT imaging system, that combination still would not have achieved the required “control system” of the claims and all of its programmed surgical functionality. Petitioner relies on the ability of a person of ordinary skill in the art to configure Swinger’s computer control unit with the missing functionality, thus necessitating an electronic conversion of the steps performed by a surgeon using Swinger’s direct visualization method using a HeNe aiming beam to manually identify a surgical treatment region for laser surgery. Ex. 1039, 34:52–57; Ex. 2088 ¶¶ 55–59, 66. That conversion, however, involves the incorporation of OCT imaging technology as the basis for a computer-controlled system to plan and then implement the planned cataract surgery, two technological leaps that the record fails to show were known or suggested. In particular, the evidence of record does not support a conclusion that OCT was a well-known system used routinely, if at all, in the identification of treatment regions in the lens or lens capsule for cataract surgery, and further does not support a conclusion that a computer-controlled system to plan and to implement a planned cataract surgery in the lens was commonplace or even considered before the invention. We recognize that Petitioner directs us to the testimony of Dr. Izatt who opines that a person of ordinary skill in the art would have found it obvious to, for example, use a controller to determine the claimed scanning pattern. Ex. 1001 ¶ 159; Pet. 32–33; Reply 3–5; see also Ex. 1123 ¶ 31 (“Once the anterior capsule is identified, it is a relatively simple process to determine the location to place the capsulotomy.”). Here, however, we agree with Patent Owner that the Petition and supporting testimony fails to provide the requisite reasoned analysis with sufficient evidence to support Petitioner’s position on obviousness. In particular, absent some evidentiary support beyond Dr. Izatt’s and Dr. Tipperman’s bare opinions that it would have been obvious to program a controller to bridge the gap between the functionality disclosed in Swinger and the required functionality of the challenged claims, we are unwilling to accept this line of reasoning. PO Resp. 27; Sur-Reply 4–7; Ex. 1001 ¶ 159; see also DSS, 885 F.3d at 1374 (Fed. Cir. 2018) (A skilled artisan’s “common sense” or “common knowledge” can potentially “fill in a missing limitation only when ‘the limitation in question was unusually simple and the technology particularly straightforward.’” (emphasis omitted)).” slip op. at 25

    • Strike new argumentNew argument disregardedDecided for patent owner

      “Inter partes review must proceed in accordance with the Petition and the arguments set forth therein. SAS Inst., Inc. v. Iancu, 138 S. Ct. 1348, 1356 (2018). “It is of the utmost importance that petitioners in the IPR proceedings adhere to the requirement that the initial petition identify ‘with particularity’ the ‘evidence that supports the ground for the challenge to each claim.’” Intelligent Bio-Systems, Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1369 (Fed. Cir. 2016). Arguments made in a different document, such as an expert’s declaration, may not be incorporated-by-reference in the Petition. 37 C.F.R. § 42.6(a)(3); see also General Access Solutions, Ltd. v. Sprint Spectrum L.P., 811 F. App’x 654, 658 (Fed. Cir. 2020) (noting that the Board did not abuse its discretion in enforcing its rules under 37 C.F.R. § 42.6(a)(3)) (non-precedential)).” slip op. at 35

    Patent outcomesUS 8,425,497 not shown unpatentable
    Claim construction§ 103 obviousness
    Patents in suitUS 8,425,497
  • PTAB · Nov 7, 2022 · IPR2021-00839 · APJ Sheridan K Snedden · IPR · Final written decision

    Claims 1–20 were not determined unpatentable because the cited combinations did not establish the claimed image guided, computer planned cataract surgery.

    RulingsFinal written decision
    • Skill levelSkill level board ownOther

      “The parties present compelling argument and evidence that one of ordinary skill in the art would include those with experience in ophthalmology, as well as in the research, manufacture, and design of medical optics or medical lasers. Pet. 24; PO Resp. 10–11. The evidence of record also demonstrates that few individuals actually had such comprehensive experience. Rather, teams of individuals with different expertise and various academic degrees (Ph.D.s, B.S.s, and M.D.s) would work together to design laser surgery systems intended to make incisions in the lens of the eye. See, e.g., Ex. 1041 (several authors are M.D.s); Ex. 1042 (the authors’ degrees include Ph.D.s, an M.D., and a B.S.); see also Ex. 1053; Ex. 1054; Ex. 1055; Ex. 2010; Ex. 2019. Thus, we find that the person of ordinary skill in the art would have been either an ophthalmic surgeon or someone with a Ph.D., M.S., or B.S. degree in physics, biomedical engineering, or a related science such as nuclear engineering, having experience in researching, manufacturing, or designing medical optics or medical lasers (e.g., five years of experience for a Ph.D. or more to compensate for lesser degrees), and that such persons would have worked in collaboration with one another to fill any necessary gaps in knowledge (e.g., the engineer would consult the medical doctor on clinical issues or physiology and the medical doctor would consult the engineer on technical issues). This definition marries the two proposed by the parties.” slip op. at 11

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “would be used to construe the claim in a civil action under 35 U.S.C. 282(b).” 37 C.F.R. § 42.100(b) (2019). Under this standard, we construe the claim “in accordance with the ordinary and customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” Id. Furthermore, we need only construe the claims to the extent necessary resolve the dispute between the parties. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). Petitioner does not assert that any claim term requires express construction. See Pet. 7 (stating that it “reserves the right to respond to any constructions that [Patent Owner] submits”). Patent Owner does not present any remarks regarding claim construction. See generally PO Resp. On this record, we determine that no claim terms require express construction. See Nidec Motor., 868 F.3d at 1017 (quoting Vivid Techs., 200 F.3d at 803 (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)). To the extent further discussion of the meaning of any claim term is necessary to our” slip op. at 12

    • BurdenNot shown unpatentable

      “We have considered Petitioner’s assertions and evidence, summarized above, and agree with Patent Owner that the combination of Swinger, Baikoff, and Li fails to disclose or render obvious a control system configured to generate an anterior capsulotomy scanning pattern based on image data. PO Resp. 18–23. Petitioner relies on Li for this limitation, however, while Li discloses the use of OCT imaging to measure certain dimensions of the anterior chamber of the eye, Li suggests that a person of ordinary skill in the art manually use the measurement data collected by the system. (Ex. 1044, 1; Ex. 2087 ¶¶ 44–46). More specifically, as summarized by Patent Owner: Li does not suggest configuring the control system to do anything at all with the measurements that it makes, much less determine an anterior capsulotomy scanning pattern. Kang [Ex. 2087] ¶¶ 80, 128. To the contrary, Li’s suggestion of using measurements to “improve the fitting of AC-IOL” teaches a [skilled artisan] to manually use the measurement data. Id. Dr. Izatt testified that “in Li, the controller, so to speak, is a human.” Ex. 2057, 207:17–208:7; see also id., 207:20–21 (in Li, “the one who identifies the treatment region is the surgeon”). PO Resp. 19–20 (emphasis removed, alteration in original). That is, Li discloses a system capable of identifying boundaries of certain eye tissue structures, but fails to disclose a controller configured to determine an anterior capsulotomy scanning pattern. Id. at 17 (“Li teaches using its OCT images as a diagnostic tool.”). Thus, while Li discloses the use of OCT to identifying certain boundaries of tissue structures, Li does not disclose any controller configured to process image data for the purposes of determining a scanning pattern for scanning a focal zone of the laser beam for performing anterior capsulotomy as required by the claims.” slip op. at 26

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundReasonable expectation not foundNot shown unpatentable

      “The problem with Petitioner’s argument based on Leapfrog and the like is that Petitioner’s obviousness challenge does not simply require automating a manual step using commonplace modern electronics, but requires the conversion of one cataract surgery treatment region identification system into another. That conversion involves the incorporation of OCT imaging technology as the basis for a computer-controlled system to plan and implement eye surgery, two technological leaps that the record fails to show was known or suggested. In particular, the evidence of record does not support a conclusion that OCT was a well-known system used routinely, if at all, in the identification of treatment regions in the lens or lens capsule for cataract surgery, and further does not support a conclusion that a computer-controlled system to plan and implement cataract surgery in the lens was commonplace. We recognize that Petitioner directs us to the testimony of Dr. Izatt who opines that a person of ordinary skill in the art would have found it obvious to, for example, use a controller to determine the claimed scanning pattern. Pet. 32–33; Reply 3–5; see also Ex. 1123 ¶ 31 (“Once the anterior capsule is identified, it is a relatively simple process to determine the location to place the capsulotomy.”). Here, however, we agree with Patent Owner that the Petition and supporting testimony fails to provide the requisite reasoned analysis with sufficient evidence to support Petitioner’s position on obviousness. In particular, absent some evidentiary support beyond Dr. Izatt’s and Dr. Tipperman’s opinions that it would have been obvious to program a controller to bridge the gap between the functionality disclosed in Swinger and the required functionality of the challenged claims, we are unwilling to accept this line of reasoning. PO Resp. 27; Sur-Reply 4–7; see also DSS Tech. Mgmt., Inc. v. Apple Inc., 885 F.3d 1367, 1374 (Fed. Cir. 2018) (A skilled artisan’s “common sense” or “common knowledge” can potentially “fill in a missing limitation only when ‘the limitation in question was unusually simple and the technology particularly straightforward.’” (emphasis omitted)).” slip op. at 29

    Patent outcomesUS 9,101,448 not shown unpatentable
    Claim construction§ 103 obviousness
    Patents in suitUS 9,101,448
  • PTAB · Oct 26, 2022 · IPR2021-00835 · APJ Sheridan K Snedden · IPR · Final written decision

    Claims 1–24 were not shown unpatentable because the asserted obviousness combinations did not establish the claimed image-processing control system or a sufficient basis to adapt the cited systems for lens surgery.

    RulingsFinal written decision
    • Skill levelSkill level board ownOther

      “The parties present compelling evidence that one of ordinary skill in the art would include those with experience in ophthalmology, as well as in the research, manufacture, and design of medical optics or medical lasers. Pet. 24; PO Resp. 10–11. The evidence of record also demonstrates that few individuals actually had such comprehensive experience. Rather, teams of individuals with different expertise and various academic degrees (Ph.D.s, B.S.s, and M.D.s) would work together to design laser surgery systems intended to make incisions in the lens of the eye. See, e.g., Ex. 1041 (several authors are MDs); Ex. 1042 (the authors’ degrees include Ph.D.s, an M.D., and a B.S.); see also Ex. 1053; Ex. 1054; Ex. 1055; Ex. 2010; Ex. 2019. Thus, we find that the person of ordinary skill in the art would have been either an ophthalmic surgeon or someone with a Ph.D., M.S., or B.S. degree in physics, biomedical engineering, or a related science such as nuclear engineering, having experience in researching, manufacturing, or designing medical optics or medical lasers (e.g., 5 years of experience for a Ph.D. or more to compensate for lesser degrees), and that such persons would have worked in collaboration with one another to fill any necessary gaps in knowledge (e.g., the engineer would consult the medical doctor on clinical issues or physiology and the medical doctor would consult the engineer on technical issues). This definition marries the two proposed by the parties.” slip op. at 11

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “Petitioner does not assert that any claim term requires express construction. See Pet. 7 (stating that it “reserves the right to respond to any constructions that [Patent Owner] submits”). Patent Owner does not present any remarks regarding claim construction. See, generally, PO Resp. On this record, we determine that no claim terms require express construction. See Nidec, 868 F.3d at 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)). To the extent further discussion of the meaning of any claim term is necessary to our decision, we provide that discussion below in our analysis of the asserted grounds of unpatentability.” slip op. at 13

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable

      “We recognize Petitioner’s argument that the use of a controller for determining an anterior capsulotomy scanning pattern would have been “nothing more than automating a manual activity using well-known components (e.g., controllers and algorithms) in predictable ways, which would have been obvious to a [person of ordinary skill in the art]” because a controller would be programmed to determine automatically scanning patterns once the boundaries of the ocular tissue are identified. Pet 32 (citing Ex.1001 ¶ 181; MPEP 2144.04; In re Venner, 262 F.2d 91, 95 (CCPA 1958)); Reply 5–6. We also recognize Petitioner’s argument that “[t]he prior art teaches that integrating diagnostic imaging and treatment functionalities in a single automated system is not only desirable, but also straightforward.” Pet. 30 (citing Ex. 1001 ¶ 150); see also Reply 7–8 (quoting Venner, 262 F.2d at 95 (“[I]t is well settled that it is not ‘invention’ to broadly provide a mechanical or automatic means to replace manual activity which has accomplished the same result”); citing Leapfrog Enterprises, Inc. v. Fisher-Price, Inc., 485 F.3d 1157, 1162 (Fed. Cir. 2007) (updating mechanical invention with modern electronics is understood in the art)). Having considered the parties positions and evidence of record, however, we find that the evidence of record does not support a conclusion that it would have been simple, straightforward, or otherwise routine to convert Swinger’s manual HeNe aiming system and Swinger’s surgeon-identification-of-target-tissue step to an automated, OCT-guided laser system. We provide further analysis below.” slip op. at 28

    • Strike new argumentNew argument disregardedDecided for patent owner

      “Inter partes review must proceed in accordance with the Petition and the arguments set forth therein. SAS Inst., Inc. v. Iancu, 138 S. Ct. 1348, 1356 (2018). “It is of the utmost importance that petitioners in the IPR proceedings adhere to the requirement that the initial petition identify ‘with particularity’ the ‘evidence that supports the ground for the challenge to each claim.’” Intelligent Bio-Systems, Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1369 (Fed. Cir. 2016). Arguments made in a different document, such as an expert’s declaration, may not be incorporated-by-reference in the Petition. 37 C.F.R. § 42.6(a)(3); see also General Access Solutions, Ltd. v. Sprint Spectrum L.P., 811 F. App’x 654, 658 (Fed. Cir. 2020) (noting that the Board did not abuse its discretion in enforcing its rules under 37 C.F.R. § 42.6(a)(3)) (non-precedential).” slip op. at 40

    Patent outcomesUS 9,095,415 not shown unpatentable
    Claim construction§ 103 obviousness
    Patents in suitUS 9,095,415
  • PTAB · Jan 21, 2022 · IPR2020-01302 · APJ Bart A Gerstenblith · IPR · Final written decision

    Claims 1, 3, 4, 7, and 9–11 were not determined unpatentable because the asserted Larson and Larson–Butler grounds did not teach sampling.

    RulingsFinal written decision
    • Skill levelSkill level board ownOther

      “Neither party contends that the differences in proposals affect the outcome of this proceeding and we do not find that they do. Nonetheless, on the full record before us, we find that our identification of the level of ordinary skill in art from the Institution Decision as well as Patent Owner’s option (b) are supported by the prior art of record, the ’474 patent, and the opinions of Drs. Subramanian and Steer (which, as discussed above, recognize that additional work experience can compensate for the lack of a formal degree). Accordingly, we modify our preliminary finding to include the specifics from option (b) of Patent Owner’s proposal. Thus, we find that one of ordinary skill in the art would have at least a bachelor’s degree in electrical engineering or a related subject and two or more years of experience in the field of RF circuit design, or at least five years of work experience and training in the design and development of RF circuits and/or systems. We also find that less work experience may be compensated by a higher level of education, such as a master’s degree.” slip op. at 11

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “Because the parties agree that the claims remaining in the trial require “sampling” and also agree that the prior art asserted in this case does not teach “sampling” (as discussed further below), we need not construe these terms expressly to resolve the controversy before us. See Vivid Techs., 200 F.3d at 803. sampling Although claim 1 does not recite “sampling” expressly, the post- institution briefs make clear that the parties agree that claim 1 and its dependent claims require sampling. In particular, Patent Owner contends, (1) “the ’474 patent pertains to a technique called sampling, which involves the use of a ‘switch’” (PO Resp. 2); (2) “all of the challenged claims are directed to a sampling system and, in particular, an energy sampling system (also known as an energy transfer system)” (id.); and (3) “[t]he challenged claims only cover energy sampling and the use of switches” (id. at 20). In its Reply, although Petitioner disagrees with Patent Owner’s interpretation of the claims as limited to energy sampling (i.e., energy transfer systems) (Pet. Reply 3–7), Petitioner contends that based on its “subsequent analysis of [Patent Owner’s] foundational ’551 patent—one of the multiple patents which the ’474 patent incorporates by reference—[Petitioner] now agrees with [Patent Owner] that the claims cover only systems that down-convert by sampling.” Pet. Reply 2. Thus, at a minimum, the parties agree that the claims at issue in this proceeding require sampling.” slip op. at 13

    • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

      “Discussion As discussed above, the parties now agree that (1) the claims at issue in this proceeding require “sampling” and (2) Larson alone or in combination with Butler do not disclose “sampling” and do not otherwise render the claims unpatentable. See Pet. Reply 2 (stating Petitioner agrees that “the claims cover only systems that down-convert by sampling”), 13 (stating that Larson and Butler do not disclose “down-conversion by sampling” and therefore agreeing that “Larson and Butler do not invalidate those claims”); see Ex. 2031, 6:20–22 (Patent Owner explaining, that “as the Board is aware, both parties agree that sampling is in the claims, and the claims are not invalid in view of all the cited prior art” (capitalization altered)). As such, based on Petitioner’s explicit admissions, Petitioner has not established by a preponderance of the evidence that (1) Larson anticipates claims 1, 3, 4, and 9–11 or (2) the combination of Larson and Butler would have rendered the subject matter of claims 1, 3, 4, 7, and 9–11 obvious to one of ordinary skill in the art at the time of the invention.” slip op. at 19

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableNot shown unpatentable

      “Discussion As discussed above, the parties now agree that (1) the claims at issue in this proceeding require “sampling” and (2) Larson alone or in combination with Butler do not disclose “sampling” and do not otherwise render the claims unpatentable. See Pet. Reply 2 (stating Petitioner agrees that “the claims cover only systems that down-convert by sampling”), 13 (stating that Larson and Butler do not disclose “down-conversion by sampling” and therefore agreeing that “Larson and Butler do not invalidate those claims”); see Ex. 2031, 6:20–22 (Patent Owner explaining, that “as the Board is aware, both parties agree that sampling is in the claims, and the claims are not invalid in view of all the cited prior art” (capitalization altered)). As such, based on Petitioner’s explicit admissions, Petitioner has not established by a preponderance of the evidence that (1) Larson anticipates claims 1, 3, 4, and 9–11 or (2) the combination of Larson and Butler would have rendered the subject matter of claims 1, 3, 4, 7, and 9–11 obvious to one of ordinary skill in the art at the time of the invention.” slip op. at 19

    Patent outcomesUS 7,539,474 not shown unpatentable
    Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 7,539,474
  • PTAB · Sep 9, 2021 · IPR2020-00646 · APJ Iftikhar Ahmed · IPR · Final written decision

    Claims 1, 5, 8, 9, 13–15, 18, and 21–23 were not shown unpatentable because Kaku was not established as analogous art.

    RulingsFinal written decision
    • Obviousness (§103) › Analogous artNot shown unpatentableNon analogous artNot shown unpatentable

      “A reference is considered analogous prior art: (1) if the reference is from the same field of endeavor as the claimed subject matter, or (2) if “the reference still is reasonably pertinent to the particular problem with which the inventor is involved,” even though the reference is not within the field of the inventor’s endeavor. In re Bigio, 381 F.3d at 1325. The field of endeavor test asks if the structure and function of the prior art is such that it would be considered by a person of ordinary skill in the art because of the similarity to the structure and function of the claimed invention. Bigio, 381 F.3d at 1325–27. A reference is reasonably pertinent if, even though it may be in a different field from that of the inventor’s endeavor, it is one which, because of the matter with which it deals, logically would have commended itself to an inventor’s attention in considering his problem. In re Clay, 966 F.2d at 659.” slip op. at 19

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

      “Petitioner proposes constructions for three claim terms, including the term “trick play functionality.” Pet. 22–23. Patent Owner argues for construction of the related claim term “the first and second indexes enabling trick play functionality.” See PO Resp. 41–49. We determine that it is not necessary to provide an express interpretation of any of those claim terms because construction of the proposed terms does not impact our determination that Petitioner has not shown that one of the prior art references is analogous to the claimed invention. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017); Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”).” slip op. at 9

    • ExcludeMotion to exclude, deniedNot reached

      “Under the particular circumstances in this case, we need not assess the merits of Patent Owner’s Motion to Exclude. As discussed above, we have determined that Petitioner has not demonstrated by a preponderance that Kaku is analogous prior art to the ’792 patent and do not reach Petitioner’s arguments on the motivation to combine Kaku with Zetts or Seo. Accordingly, Patent Owner’s Motion to Exclude is dismissed as moot.” slip op. at 34

    • Strike new argumentNew argument disregardedGranted

      “As discussed above (supra § III.E.4.a), Petitioner’s papers fail to link Dr. Reader’s declaration testimony on the level of ordinary skill in the art to the analogous art inquiry and fail to identify a field of endeavor for the ’792 patent. We therefore agree with Patent Owner that Petitioner’s demonstrative slide 53 presents improper new arguments that have not been previously made. See Paper 38, 2 (“The parties may only rely upon evidence that has been previously submitted in the proceeding and may only present arguments that have been previously made in the submitted papers. No new evidence or arguments may be presented at the hearing.”), 5 (“Demonstratives are not a mechanism for making new arguments.”). We therefore sustain Patent Owner’s objections. We note, however, that demonstratives are not evidence. See id. at 5 (“Demonstrative exhibits used at the hearing are not evidence, nor will they be relied upon as evidence. Rather, demonstratives are visual aids to a party’s oral presentation regarding arguments and evidence previously presented and discussed in the papers”); CTPG 84 (“Demonstrative exhibits used at the final hearing are aids to oral argument and not evidence.”). In this Final Written Decision, we rely solely on the arguments properly presented in the parties’ briefs and the evidence of record, not on the demonstratives.” slip op. at 35

    Patent outcomesUS 8,472,792 not shown unpatentable
    Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 8,472,792
Page 1 of 2
← Previous12Next →

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.