• Stingray Group Inc. / Stingray Music USA, Inc. v. Edwin A. Hernandez-MondragonSome claims unpatentable
  PTAB · Jun 10, 2026 · IPR2025-00350 · APJ Jason M Repko · IPR · Final written decision

  Claims 7–12 were held unpatentable over Wannamaker alone or with Avellan; claims 1–6 and 13 were not shown unpatentable because Avellan did not teach the claimed screen-capture sequence and assembly.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for petitioner

    “Patent Owner submits a similar definition and does not take issue with the Petition’s characterization of the level of ordinary skill in the art. PO Resp. 17. We determine that no express finding is necessary and that the level of ordinary skill in the art is reflected by the prior art of record. Any perceived difference in how each party characterizes a POSITA’s education, knowledge, and work experience does not change our analysis or conclusions.” slip op. at 5

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Neither party has offered any claim construction arguments, relying on ordinary and customary meaning. Pet. 19–20; PO Resp. 18. We determine that construction of claim terms is not necessary to resolve the disputes raised by the parties in this proceeding.” slip op. at 5

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “Yet paragraph 122 of Mr. Lipoff’s declaration merely repeats the Petition’s argument almost verbatim. Compare Ex. 1007 ¶ 122, with Pet. 28. Mr. Lipoff does not add any citation to Avellan or any other source that supports his testimony. See Ex. 1007 ¶ 122. Nor does Mr. Lipoff offer any additional technical reasoning than what is stated in the Petition. Testimony may be entitled to little weight if it merely restates the petition’s unsupported, conclusory assertions without adding supporting evidence or technical reasoning. Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential). That is the case here.” slip op. at 8

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “We are persuaded by Patent Owner’s argument that claim 1 is not obvious over Avellan because it does not assemble a media stream of multimedia items using the recited screen captures. See PO Resp. 21–23. We agree with Patent Owner that the plain language of the claim requires more than transmitting individual media items. PO Sur-reply 20. To the extent that Avellan captures images, those images do not meet the claimed requirements for a “temporal sequence of screen captures” in the independent claims, which must (1) be of the web page rendered by a browser, (2) “define all the content of the web page at a given time,” (3) “illustrate a dynamic change of at least a portion of the content over time” when two of them are compared, and (4) used to assemble “the at least one media stream.” Rather, the record better supports Patent Owner’s argument that Avellan transmits the multimedia items separate from any media stream assembled from screen captures. PO Resp. 21–23; PO Sur-reply 20.” slip op. at 7

  Patent outcomesUS 10,524,002 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR
  Patents in suitUS 10,524,002
• Stingray Group Inc. / Stingray Music USA, Inc. v. Edwin A. Hernandez-MondragonSome claims unpatentable
  PTAB · May 28, 2026 · IPR2025-00351 · APJ Brian P Murphy · IPR · Final written decision

  Claims 1–9 are unpatentable as obvious over the stated combinations; claims 10–26 were not shown unpatentable because Avellan does not teach limitations [10d]–[10f].

  RulingsFinal written decision

  • Skill levelOther

    “would have a bachelor’s or equivalent degree in computer science or a related field and at least 2 years of experience in multimedia processing or delivery using internet protocols.” Pet. 10 (citing Ex. 1002 ¶¶ 67–68). The Petition further states that “a person with less formal education but more experience, or more formal education but less experience, could have also met the relevant standard for a POSITA.” Id. Patent Owner submits a similar definition and does not take issue with the Petition’s characterization of the level of ordinary skill in the art of delivering multimedia content. Resp. 18. We determine that no express finding is necessary and that the level of ordinary skill in the art is reflected by the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978). Any perceived difference in how each party characterizes a POSITA’s education, knowledge, and work experience does not change our analysis or conclusions. slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “Neither party has offered any claim construction arguments, relying on ordinary and customary meaning. Pet. 11; Resp. 18–19; Reply 5. We determine that construction of claim terms is not necessary to resolve the disputes raised by the parties in this proceeding. See, e.g., Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011) (“[C]laim terms need only be construed ‘to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 8

  • Expert testimonyPetitioner expert creditedDecided for petitioner
  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element) › Inherent disclosureInherency not foundNot shown unpatentableNot shown unpatentable

    “To establish inherency, the extrinsic evidence “must make clear that the missing descriptive matter is necessarily present in the thing described in the reference, and that it would be so recognized by persons of ordinary skill.” Continental Can Co. v. Monsanto Co., 948 F.2d 1264, 1268 (Fed. Cir. 1991). “‘Inherency, however, may not be established by probabilities or possibilities. The mere fact that a certain thing may result from a given set of circumstances is not sufficient.’” Id. at 1269 (quoting In re Oelrich, 666 F.2d 578, 581 (C.C.P.A. 1981)). Reasonable inferences of a POSITA may suffice to establish inherent disclosure in a prior art reference such as Farber. See Eli Lilly v. Los Angeles Biomedical Research Institute, 849 F.3d 1073, 1074–1075 (Fed. Cir. 2017) (“[T]he dispositive question regarding anticipation is whether one skilled in the art would reasonably understand or infer from a prior art reference that every claim element is disclosed in that reference.”). Here, however, we find the Petition’s argument and evidence insufficient to establish by a preponderance of the evidence that Farber inherently discloses limitation [1b].” slip op. at 16

  Patent outcomesUS 11,140,441 mixed
  Claim construction§ 102 anticipation§ 103 obviousness
  Patents in suitUS 11,140,441
• Intel Corporation v. VLSI Technology LLCSome claims unpatentable
  PTAB · Jan 12, 2021 · IPR2019-01195 · APJ Minn Chung · IPR · Final written decision

  Claims 13 and 14 are unpatentable as anticipated by Kim; claims 17, 18, and 20 were not shown unpatentable over Kim and Lee because the proposed combination was inadequately explained.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “’026 patent would have had a Master’s degree in Electrical Engineering or Computer Engineering, plus at least two years of experience in integrated circuit design, or alternatively a Bachelor’s degree in one of those fields plus at least four years of experience in integrated circuit design. Pet. 16 (citing Ex. 1102 ¶ 49). In our Institution Decision, we found Petitioner’s proposal consistent with the level of ordinary skill in the art reflected by the prior art of record, see Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978), and, therefore, preliminarily adopted Petitioner’s unopposed position as to the level of ordinary skill in the art. Inst. Dec. 15. Neither Patent Owner, in its Response, nor Dr. Annavaram, in his declaration, proposes a level of ordinary skill in the art. Instead, Patent Owner states that “Patent Owner applies Petitioner’s stated skill level for this response” (PO Resp. 26), and Dr. Annavaram similarly states that “[f]or the purpose of this declaration, I adopt Dr. Harris’ definition of a [person of ordinary skill in the art]” (Ex. 2009 ¶ 24). Nothing in the full record persuades us that our preliminary finding as to the level of ordinary skill in the art was incorrect. Based on the complete record, because our preliminary finding is consistent with the level of ordinary skill in the art reflected by the prior art of record, we maintain and reaffirm that one of ordinary skill in the art at the time of the invention would have had a Master’s degree in Electrical Engineering or Computer Engineering, plus at least two years of experience in integrated circuit design, or alternatively a Bachelor’s degree in one of those fields plus at least four years of experience in integrated circuit design. Inst. Dec. 15; see Pet. 16 (citing Ex. 1102 ¶ 49).” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner

    “To the extent Patent Owner argues that these particularized selection clauses recited in different claims must have the same or similar meaning because they all use the word “selecting” (see PO Resp. 28–29), we disagree with Patent Owner. See IGT v. Bally Gaming Int’l, Inc., 659 F.3d 1109, 1117 (Fed. Cir. 2011) (“We caution that claim language must be construed in the context of the claim in which it appears. Extracting a single word from a claim divorced from the surrounding limitations can lead construction astray. Claim language must be construed in the claim in which it appears.” (emphasis added)). The selection clauses recited in these claims are plainly different on the face of the claims when considering the material differences in the claim language set forth above. According the same meaning to the limitations that recite “select . . . based on” indicators, “select . . . when” certain conditions are met, and “select . . . out of a group” of values would be improper because it would blur the material differences in the claim language recited expressly in the claims. Instead, we interpret the selection clauses recited in the challenged claims “in the context of the particular claim in which the disputed term appears” and “in the context of the entire patent, including the specification.” Phillips, 415 F.3d at 1313. In other words, we do not construe the single word “selecting” in isolation, but, rather, interpret the full selection clauses recited in the challenged claims in the context of the entire patent. Claim 13 recites “selecting, by the control circuit, a value of a control signal based on the mode indicator and on the leakage indicator.” In our view, the plain meaning of this limitation is clear on the face of the claim—a value of a control signal is selected based on two indicators, the mode indicator and the leakage indicator.” slip op. at 14

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “Tr. 47:7–23. Because the output of Kim’s NAND gates will be different depending on the value of Kim’s memory cells C1–CN allowed to “pass through,” we agree with Petitioner that the value of Kim’s memory cells C1– CN (the claimed “leakage indicator”) “plays a role” in deciding what the output of Kim’s NAND gates (the claimed “value of the control signal”) will be. Moreover, Patent Owner acknowledged that the output of Kim’s NAND gate is determined based on the inputs to the NAND gates (i.e., the sleep signal input and the memory cell signal input). JUDGE CHUNG: But, knowing a little bit about how a NAND gate works, isn’t it the case that the input to the NAND gates, G1 through GN, with the input of the sleep signal and the C1 through CN signal, isn’t it the case that input to the NAND gate determines what the output is? MS. ZHONG: Okay. So any logic gate, the output will depend on the input. That’s for sure. Tr. 44:18–25; but see id. at 45:3–10 (stating that even if the “output is in control of the input, . . . that does not mean the selection is based on that input”). Thus, we find that Kim’s NAND gate (the claimed “control circuit”) operates to determine its output (the claimed “value of the control signal”) based on its input of the sleep signal (the claimed “mode indicator”) and the memory cell value input (the claimed “leakage indicator”). As discussed in Section III.B, the Specification indicates that “select[ing] the value of the control signal based on the mode indicator and on the leakage indicator” recited in claim 13 is synonymous to determining the value based on the recited indicators. See Ex. 1101, 4:4–11. Thus, the evidence of record shows that Kim teaches “selecting, by the control circuit, a value of a control signal based on the mode indicator and on the leakage indicator,” as recited in claim 13.” slip op. at 44

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “We are not persuaded by Petitioner’s argument and evidence. First, although Petitioner proposes “[s]ubstituting Lee’s inputs of leakage current and temperature for generating a power gate control signal” (i.e., Lee’s “control signal (BIAS)”) for “Kim’s inputs of leakage current and other ‘stimuli’ for generating a power gate control signal” (Pet. 64 (citing Ex. 1102 ¶ 115)), neither Petitioner nor Dr. Harris explains adequately how they are proposing to “substitute” Kim’s control signal with Lee’s “control signal (BIAS).” For example, Figure A reproduced above does not show how Petitioner or Dr. Harris proposes to use Lee’s “control signal (BIAS)” in the proposed combination. Petitioner asserts that “[a]lthough Lee’s control signal is analog and Kim’s control signal is digital, it was well known to apply teachings in an analog domain to a digital domain, and conversions between analog and digital domains were easy to implement.” Pet. 66 (emphases added) (citing Ex. 1102 ¶ 121; Ex. 1115). Dr. Harris similarly states that Figures A and B show examples of obvious ways to use in Kim’s system Lee’s teaching of setting conductance of the array based on temperature. A POSA would have found both of these ways obvious. That Lee uses an analog control signal and Kim uses a digital control signal would have presented no obstacle to a POSA. . . . That is, converting analog circuit elements and signals to digital was well known long before the ’026 patent. Ex. 1102 ¶ 121 (emphases added) (citing (Ex. 1115) (“Analog-to-digital converters (ADC’s) are ubiquitous, critical components of software radio and other signal processing systems.”)). But Dr. Harris does not explain adequately how “to use in Kim’s system” the digitized BIAS signal of Lee. See id. The only additional input signal shown in Figure A compared to Figure 4 of Kim is the temperature line that has the value of 0 when the temperature is cold and the value of 1 when the temperature is hot. See Ex. 1102 ¶ 116 (Fig. A). There is no explanation of how the modified teaching of the BIAS signal of Lee (i.e., modified or converted to a digital signal) would have worked in the proposed combination of Figure A.” slip op. at 69

  Patent outcomesUS 8,081,026 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,081,026
• Intel Corporation v. VLSI Technology LLCSome claims unpatentable
  PTAB · Feb 6, 2020 · IPR2018-01144 · APJ Bart A Gerstenblith · IPR · Final written decision

  Claims 2, 7, and 8 are unpatentable as obvious over Bednar and Gunther; claim 3 was not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “to the level of ordinary skill in the art was incorrect. Accordingly, because our preliminary finding is consistent with the level of ordinary skill in the art reflected by the prior art of record, we maintain and reaffirm that one of ordinary skill in the art at the time of the invention would have had “at least (1) an undergraduate degree in electrical engineering (or an equivalent subject), together with three years of post-graduate experience designing power management circuits; or (2) a master’s degree in electrical engineering (or equivalent subject) together with two years of post-graduate experience designing power management circuits.” Inst. Dec. 8; see Pet. 29 (citing Ex. 1102 ¶¶ 26–27).” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed board ownDecided for patent owner

    “construction is erroneous. Accordingly, because the ’922 patent defines “power island,” we maintain and reaffirm that “power island” means a “group of components with similar power requirements.”” slip op. at 12

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “not to expressly construe “conversion controller” was erroneous or that an express construction is required to resolve any dispute between the parties. Accordingly, we maintain and reaffirm that because the construction of “conversion controller” does not resolve a controversy in the matter before us, we decline to construe it expressly.” slip op. at 13

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner

    “construction of “memory device,” specifically whether it encompasses a latch. Neither party argues that “memory device” is expressly defined in the ’922 patent. Accordingly, the plain and ordinary meaning of the term controls. And, the standard under which we construe the term is the broadest reasonable construction in light of the specification.” slip op. at 86

  Patent outcomesUS 8,004,922 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,004,922
• Wabco Holdings Inc. / Laydon Composites Ltd. v. Transtex Composites Inc.Some claims unpatentable
  PTAB · Jan 10, 2020 · IPR2018-01319 · APJ Bart A Gerstenblith · IPR · Final written decision

  Claims 1, 5–11, and 15–19 are unpatentable as obvious over Layfield and Rinard; claims 2–4, 12–14, and 20 were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Dr. Micklow does not explain how or why he proposes a different level of ordinary skill in the art as compared to the level proposed by Petitioner and preliminarily adopted in our Decision on Institution. See generally id. ¶¶ 28–31. Additionally, neither Patent Owner nor Dr. Micklow argues that the difference in the proposed level of ordinary skill in the art affects the outcome of this proceeding; Dr. Micklow, in fact, states the contrary—that his opinions are the same under either level of skill. See Ex. 2001 ¶ 31.7 Nothing in the full record is sufficient to persuade us that our preliminary finding as to the level of ordinary skill in the art was incorrect. Accordingly, because our preliminary finding is consistent with the level of ordinary skill in the art reflected by the prior art of record, we maintain and reaffirm our preliminary finding that the level of ordinary skill in the art at the time of the invention would have been “a bachelor’s degree in mechanics, aeronautics, materials, or a related field of study, or equivalent experience, and at least two years of experience in the development of components of vehicles, or an equivalent amount of relevant work or research experience.” Inst. Dec. 10–11; see Pet. 10.” slip op. at 8

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “Turning to Petitioner’s video (Ex. 1018), Petitioner asserts testing of commercial versions of the Layfield fairing illustrates what one skilled in the art would have understood from Layfield itself, namely that the Layfield strut is adapted to sustain an elastic deformation when a load is applied to the resilient strut when the skirt panel moves away from the configuration reducing air drag about the trailer and to self-recover the resilient strut original shape when the load is removed. Pet. 29 (citing Ex. 1010 ¶¶ 102–103).16 We afford this evidence little weight for several reasons. First, the video does not show the strut or the bending of a strut. See Ex. 1018. In fact, the only feature shown is a skirt panel attached to a trailer. that because thermoplastic material is more resilient than aluminum, we should adopt Petitioner’s argument. Pet. Reply 15–16 (citing Ex. 1058, 1– 12; Ex. 1010 ¶¶ 77–82). We must base our decision in this case on the arguments and evidence presented. As explained above, the record before us has contradictory evidence in the form of Dr. Micklow’s testimony that was not before the examiner. 16 Petitioner does not cite Exhibit 1018 in the Petition, but instead cites to Mr. Tres’s testimony regarding the exhibit. Id. Thus, from the video, it is unknown whether the skirt panel is attached to the trailer by one strut, multiple struts, or additional features. Second, Petitioner does not identify clearly how the tested system precisely corresponds to the teachings of Layfield. For example, Patent Owner raises a number of issues with the struts and panels in the video to which Petitioner provides either no response or an unconvincing response. For example, Patent Owner argues that each embodiment of Layfield uses trusses 36 to “interconnect each skirt panel and reinforce the panel assembly,” while it is asserted that the skirt panels in the video do not have trusses and are not interconnected. PO Resp. 26. Petitioner argues that the skirt panels in the video were made according to the teachings of Layfield and did include “integral vertical lateral side edges as the connecting mechanism for adjacent panels.” Pet. Reply 19 (citing Exs. 1018, 2003, 2005; Ex. 1004, 18:36–39; Ex. 1010 ¶¶ 63–64; Ex. 1055 ¶¶ 37–38). Other than stating that the skirt panels have connecting mechanisms, Petitioner does not address the fact that the panels are not interconnected according to the teachings of Layfield, as Patent Owner correctly pointed out. See generally id. at 19–21.” slip op. at 28

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “components (see, e.g., id. at 17:1–10), Layfield does not contain any express disclosure concerning the flexibility of the struts. Nor does Layfield include any discussion about the desirability of strut flexibility. The closest Layfield comes to discussing flexibility of the struts is by frequently referring to the struts as “support struts” (see, e.g., id. at 18:40) and discussing the use of a “bracket means,” which is on the struts, to “rigidly secure” the skirt panels to the trailer (id. at 6:48–49). Further, Layfield’s detailed discussion of the embodiment of support strut 58 shown in Figure 10, reproduced below, highlights the bracing and reinforcement features. Figure 10, above, shows the construction detail of a support strut 58. Ex. 1004, 15:45. Specifically, Layfield discloses that strut 58 includes “a pair of spaced-apart vertical members 160, which are braced by horizontal cross-members 162” and “reinforcing rectangular lattice 170.” Id. at 15:46– 54. Thus, we agree with Patent Owner’s argument that “Layfield does not expressly teach that the ‘support struts 58’ are ‘resilient.’” PO Resp. 42 (citing Ex. 2001 ¶¶ 148–149). We reiterate that Petitioner’s first challenge is based on anticipation. Thus, Petitioner must show that resilient struts are “either expressly or inherently described, in” Layfield. Verdegaal Bros. Inc., 814 F.2d at 631; see also PO Resp. 42. In its Reply Brief and at the oral hearing, Petitioner contends that its challenge is based on express disclosure, not inherency. See Pet. Reply 17–18; Tr. 9:21–11:4 (arguing that “this is not a case of inherency”). Petitioner contends one of ordinary skill in the art “would have understood, based upon Layfield’s express disclosures concerning the material, structure, and connection of the strut, that the Layfield strut is resilient and can sustain significant and substantial elastic deformation.” Pet. Reply 18 (citing REG Synthetic Fuels, LLC v. Neste Oil Oyj, 841 F.3d 954, 960–61 (Fed. Cir. 2016)). Whether we analyze Petitioner’s argument based on express disclosure or inherency, we reach the same result. To begin, although we agree with Petitioner that a prior art reference “need not satisfy an ipsissimis verbis test” (Pet. Reply 17 (quoting In re Gleave, 560 F.3d 1331, 1334 (Fed. Cir. 2009))), there is no express statement that Layfield’s strut is resilient or otherwise exhibits a characteristic synonymous with resiliency. Additionally, we do not agree that Petitioner’s reliance on the thermoplastic materials, disclosed by Layfield for construction of the strut, establishes whether the strut is resilient and capable of elastic deformation. The evidence submitted by the parties is contradictory as to whether one of ordinary skill in the art would have understood Layfield’s struts to be resilient based on the material alone.15 Compare Ex. 1010 ¶¶ 74–82 15 Petitioner also points to a finding by the examiner, during prosecution of the ’017 patent application, that an aluminum strut was resilient, and argues (Mr. Tres opining as to the materials disclosed by Layfield), with Ex. 2001 ¶¶ 160–164 (Dr. Micklow contradicting Mr. Tres’s testimony regarding the materials disclosed by Layfield). Further, the evidence is contradictory as to whether one of ordinary skill in the art would have understood from the design of Layfield’s strut, specifically the taper design and mechanism by which the strut connects to the trailer I-beam, that the strut is resilient. Compare Ex. 1010 ¶¶ 83–90 (Mr. Tres’s testimony regarding the design and connection mechanism), with Ex. 2001 ¶¶ 165–175 (Dr. Micklow’s contradictory testimony). Turning to Petitioner’s video (Ex. 1018), Petitioner asserts testing of commercial versions of the Layfield fairing illustrates what one skilled in the art would have understood from Layfield itself, namely that the Layfield strut is adapted to sustain an elastic deformation when a load is applied to the resilient strut when the skirt panel moves away from the configuration reducing air drag about the trailer and to self-recover the resilient strut original shape when the load is removed. Pet. 29 (citing Ex. 1010 ¶¶ 102–103).16 We afford this evidence little weight for several reasons. First, the video does not show the strut or the bending of a strut. See Ex. 1018. In fact, the only feature shown is a skirt panel attached to a trailer.” slip op. at 26

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “Additionally, Patent Owner similarly contends that the modifications proposed are redundant of Layfield’s “flexible lower panel 20,” which already “allow[s] flexing when impacting a road object.” PO Resp. 59 (citing Ex. 1004, 14:13–18); see PO Sur-reply 26–27. We disagree. Again, the proposed modifications here are to Layfield’s struts. In the context of Petitioner’s anticipation challenge, we agreed with Patent Owner and found that Petitioner had not established sufficiently on the record that Layfield’s struts were resilient. See supra, § II.D.a.i., ii. Therefore, the proposed modification addressed here, to make Layfield’s struts resilient, does not duplicate the objective of Layfield’s flexible lower panel 20 at least because (a) Layfield’s struts are a different structure than lower panel 20 and (b) modification of Layfield’s struts would provide greater impact protection to other panels aside from just lower panel 20. See Pet. Reply 26–27 (One of ordinary skill in the art “would have been motivated to do so because Rinard and Layfield both seek to provide fairing panels with ‘sufficient flexibility’ to bend when encountering objects.” (citing Ex. 1004, 12:67– 13:4; Ex. 1006, 10:43–50; Ex. 1055 ¶ 47)). We determine that Petitioner has shown that one of ordinary skill in the art would have had a reason with rational underpinning to look to other similar types of trailer components that are flexible to make further improvements to Layfield’s design. See KSR, 550 U.S. at 417 (“[I]f a technique has been used to improve one device, and a person of ordinary skill in the art would recognize that it would improve similar devices in the same way, using the technique is obvious unless its actual application is beyond his or her skill.”). Third, Patent Owner contends one of ordinary skill in the art “would not have a reasonable expectation of success at achieving the claimed technology by looking to the vertical supports of Rinard’s air scoops to modify the Layfield skirt panels 10 and support struts 58.” PO Resp. 61 (citing Ex. 2001 ¶¶ 237–240). Patent Owner asserts that because Layfield’s upper skirt panels are rigid and non-moving one of ordinary skill in the art “would not reasonably expect the hypothetical modified panels (with their reinforcing trusses 36) to move.” Id. Patent Owner also argues that Rinard teaches “an upper skirt panel that is rigid and non-moving” and so it is not reasonable to expect modifying Layfield as proposed would somehow cause Layfield’s fixed skirt panels to be able to move as claimed. PO Sur-reply 27–28 (citations omitted). We disagree for the same reasons discussed above—namely, we find Layfield’s upper skirt panels to be resilient. Therefore, one of ordinary skill in the art would have a reasonable expectation of success in achieving a resilient strut adapted as claimed by modifying Layfield’s strut in light of Rinard, for the reasons proposed by Petitioner. See Pet. Reply 27 (“Applying this solution to the Layfield skirt panel and struts would yield the predictable result of allowing the Layfield skirt panel 10 and struts 58 to absorb greater impacts without having to be repaired or replaced.” (citing Ex. 1021, 7–8, 11–12)).” slip op. at 42

  Patent outcomesUS 8,449,017 mixed
  § 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 8,449,017
• Institut Straumann AG / Dental Wings Inc. v. Sirona Dental Systems GmbHSome claims unpatentable
  PTAB · Nov 15, 2016 · IPR2015-01190 · APJ Brian P Murphy · IPR · Final written decision

  Claims 1–8 were held unpatentable as obvious over Bannuscher and Truppe; claims 9–10 were not shown unpatentable; the motion to amend was denied.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “interpretation of the language used in claim 1 and the additional limitations of dependent claims 9 and 10. Patent Owner’s proposed construction also impermissibly reads limitations from the preferred embodiment of Figure 5 into claim 1. Patent Owner would limit the pilot hole location exclusively to a position directly over the implant position and require the drill bit to pass through the pilot hole while drilling a bore hole into the patient’s jaw. The language recited in claim 1, in the context of the ’006 specification, does not so-limit the “determinating a pilot hole” step. First, Patent Owner fails to consider the present participle form “determinating”5 at the beginning of the recited method step at issue. As a result, Patent Owner conflates the recited device production step with a specific process for drilling a bore hole into a patient’s jaw during tooth implant surgery. PO Resp. 14–15. For example, Patent Owner relies on Dr. Erickson’s Declaration testimony (and Dr. Benjamin’s deposition testimony) for the proposition that “pilot hole” is a term of art referring to “an initial hole through which a pilot drill passes during an operation.” Ex. 2002 ¶ 37 (cited at PO Resp. 16–17); see also PO Resp. 16–17 (citing Ex. 2023, 24:3– 22, 25:18–27:2, 52:2–9). The ’006 patent does not describe or reference any such “pilot drill” or “initial hole” being made during a tooth implant operation. Regardless, the claim limitation at issue is a step in a method of producing a drill template. It recites defining a pilot hole in a drill template with reference to the surfaces of neighboring teeth, nothing more. The function of actually passing a drill through a pilot hole in a drill template” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionDecided for petitioner

    “Petitioner argues that the term “pseudo-x-ray picture” is not a term that has a commonly understood meaning to a POSA. Pet. 19 (citing Ex. 1002 ¶ 45 [47]). Patent Owner does not comment on the construction of “pseudo-x-ray picture.” PO Resp. 15–19. Having reviewed the complete record, we adopt Petitioner’s argument and evidence in support of Petitioner’s proposed broadest reasonable interpretation of “pseudo-x-ray picture.” Therefore, we adopt Petitioner’s proposed broadest reasonable interpretation of “pseudo-x-ray picture” as “any representation of measured data records of the three-dimensional optical measuring that can be superimposed on an x-ray image.” Pet. 19 (citing Ex. 1002 ¶ 49).” slip op. at 17

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableInherency not foundNot shown unpatentable

    “stylus is used to penetrate the surface of the gum repeatedly to measure the structure of the jaw bone displayed in Figure 25. PO Resp. 30–31 (citing Ex. 1007, 24:53–65 (“[S]tylus member 52 is provided with a sharp stylus 574 (FIG. 1) having a length sufficient[ly] long to penetrate gum tissue and contact the bone surface. . . . [P]ractitioner repeats the procedure of piercing the gum tissue in a region about the desired implantation site and taking point data until enough data has been collected . . . to map . . . the entire surface of bone 558 [Fig. 25] about the implantation site.”)). We agree with Patent Owner and find that the use of a sharp stylus to pierce the gum and take multiple data points via contact digitization of the jaw bone beneath the skin surface is not a 3-D optical measuring of the visible surfaces of a patient’s jaw.” slip op. at 21

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “would have been motivated to combine their teachings with respect to correlating X-ray imaging data of the jaw and 3-D surface data of the jaw and teeth. Reply 22–23 (citing Ex. 1002 ¶¶ 89, 92; Ex. 1008, 1:10–11 (“precise planning of the surgical operation is necessary”); Ex. 1010, 5:19– 25 (“it is possible to carry out the entire implantological, treatment and operation planning on a scientific basis . . . to implement holistic planning results in a precisely clinical manner”)). More particularly, Bannuscher discloses the desire to obtain “all the necessary [clinical] parameters” relevant to pre-surgical implant planning, which can be “combined together” (“correlated” in the language of claim 1) using planning simulation software, for transfer to a drill template. Ex. 1010, 5:44–6:13, 6:24–40, 7:38–8:4. As Dr. Erickson testified, it would have been desirable for a POSA to have as much diagnostic information as possible when planning for dental implant surgery. Ex. 1029, 31:12–21. Truppe discloses the advantage of correlating three-dimensional X-ray imaging data of the jaw and optical imaging data of the jaw and teeth, using simulation software, to obtain a “vivid” representation. Ex. 1008, 2:7–16, 3:19–28, 3:56–58; 4:1–5. Truppe, therefore, discloses a similar process to that disclosed in Bannuscher with respect to correlating 3-D X-ray imaging data and 3-D optical data representing the surfaces of the jaw and teeth, to generate the best possible representation of the patient’s jaw and teeth. Ex. 1002 ¶¶ 89–92. A POSA would have been motivated to use Truppe’s optical measurement system to generate 3-D surface data of the jaw and teeth for use in Bannuscher’s planning simulation software, in order to produce an enhanced image for determining the optimal bore hole and pilot hole in the drill template. Id.; Ex. 2023, 186:8–187:13 (“the optical imaging [of Truppe] would basically just enhance the diagnostic data [of Bannuscher]”). For example, a POSA would have optically measured the plaster model of the jaw and teeth referenced in Bannuscher and the patient’s actual jaw and teeth, as in Truppe, to produce a “vivid” image for correlation with the X-ray imaging data. Ex. 1002 ¶¶ 89, 92.20 Bannuscher’s determination of the optimized bore hole and corresponding pilot hole in the drill template would be based on the enhanced imagery generated from the correlated 3-D data sets. In short, we are persuaded that a POSA would have had reason to incorporate the teaching of Truppe’s enhanced 3-D optical measurement technique into Bannuscher’s method for correlating 3–D X-ray image and model geometry data sets, to determine an optimal bore hole and corresponding pilot hole in the drill template. For the reasons given above, we are persuaded that Petitioner has established a sufficient motivation for a POSA to combine the relevant teachings of Bannuscher and Truppe, with a reasonable expectation of success, by a preponderance of the evidence.” slip op. at 40

  Patent outcomesUS 6,319,006 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 6,319,006
• Fca US LLC v. Signal IP, Inc.Some claims unpatentable
  PTAB · Oct 19, 2016 · IPR2015-01118 · APJ John A Hudalla · IPR · Final written decision

  Claim 3 is unpatentable under § 103 over three instituted combinations; claims 1 and 2 were not shown unpatentable over Mock and Steele.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “We disagree with Signal. In particular, FCA cites Dr. Lall’s testimony on “experience in vehicle electronics” and “experience in the design of automobile components.” Pet. 17 (citing Ex. 1009 ¶¶ 17–19). In addition, Dr. Lall testified at his deposition that an ordinarily skilled artisan also would have had the general background tools provided by obtaining a bachelor’s degree in mechanical or electrical engineering, as defined by the standard curricula for those degrees. See, e.g., Ex. 2001, 11:16–15:22. Dr. Lall also referenced his familiarity with these curricula based on his employment as a professor in the Department of Mechanical Engineering at Auburn University. See id. at 12:19–13:5; Ex. 1009 ¶ 4. Accordingly, we do not agree with Signal that Dr. Lall’s testimony as to the level of ordinary skill in the art for the ’374 patent is conclusory and/or lacking a factual basis. As such, we decline to discount the weight given to Dr. Lall’s testimony on that issue.6 Importantly, Signal never proposed an alternative definition of the ordinary level of skill in the art. See Tr. 48:17–25. As such, we have no indication from Signal about what particular aspects of FCA’s definition Signal believes are incorrect, if any. FCA’s proposed definition of the level of ordinary skill comports with the qualifications a person would need to understand and implement the teachings of the ’374 patent and the prior art of record. Accordingly, we apply it for purposes of this Decision.” slip op. at 16

  • Expert testimonyPetitioner expert creditedDecided for petitioner

    “We disagree with Signal. In particular, FCA cites Dr. Lall’s testimony on “experience in vehicle electronics” and “experience in the design of automobile components.” Pet. 17 (citing Ex. 1009 ¶¶ 17–19). In addition, Dr. Lall testified at his deposition that an ordinarily skilled artisan also would have had the general background tools provided by obtaining a bachelor’s degree in mechanical or electrical engineering, as defined by the standard curricula for those degrees. See, e.g., Ex. 2001, 11:16–15:22. Dr. Lall also referenced his familiarity with these curricula based on his employment as a professor in the Department of Mechanical Engineering at Auburn University. See id. at 12:19–13:5; Ex. 1009 ¶ 4. Accordingly, we do not agree with Signal that Dr. Lall’s testimony as to the level of ordinary skill in the art for the ’374 patent is conclusory and/or lacking a factual basis. As such, we decline to discount the weight given to Dr. Lall’s testimony on that issue.6” slip op. at 16

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “We are persuaded by Signal’s arguments. “Distinctive” ordinarily means “characteristic of one person or thing, and so serving to distinguish it from others.” Distinctive, NEW OXFORD AMERICAN DICTIONARY (1st ed. 2001) (Ex. 3001). Accordingly, the plain and ordinary meaning of the limitation “distinctive codes for tire transmitters and vehicle function transmitters” must reflect that the recited codes distinguish tire transmitters from vehicle function transmitters. This is consistent with the surrounding language of claim 1, which recites different actions taken depending on whether the transmitted data contains “a distinctive code for tire transmitters” or “a distinctive code for the vehicle function transmitters.” This usage within the claim is important because “the claims themselves provide substantial guidance as to the meaning of particular claim terms.” Phillips, 415 F.3d at 1314. In particular, “the context in which a term is used in the asserted claim can be highly instructive.” Id. We also note that FCA’s proposed interpretation would read out language from the claim. Under FCA’s theory, the claim does not require the codes to distinguish between tire transmitters and vehicle function transmitters, and encompasses codes that are merely distinct from each other. In effect, FCA would have us read the limitation as “the remote transmitters all having the same data format but distinctive codes.” The claim does not stop there, however. The full limitation is “the remote transmitters all having the same data format but distinctive codes for tire transmitters and vehicle function transmitters” (emphasis added). Thus, the codes are distinctive “for” tire transmitters and vehicle function transmitters, and the processor performs different actions depending on whether the transmitted data contains “a distinctive code for tire transmitters” versus “a distinctive code for vehicle function transmitters.” FCA’s proposed interpretation would read out this important aspect of the claim. Interpreting the claim to require the codes to distinguish between the two types of transmitters also is consistent with the Specification. We agree with Signal that the usage of “distinctive codes” in claim 1 is supported by the Specification’s disclosure of an exemplary message format with a “header” that “identif[ies] the source as a tire sender or a keyless entry fob.” Ex. 1001, 4:51–55, Fig. 4. Importantly, the header is separate and distinct from the “unique transmitter identification code,” an identifier unique to each transmitter that corresponds to the “ID” block in Figure 4. Id. at 4:55– 56, Fig. 4. In other words, the Header distinguishes types of transmitters (i.e., a tire sender or keyless entry fob) by their function or category, whereas the ID uniquely identifies a particular transmitter and distinguishes it from the others. An exemplary use of the ID block is illustrated with respect to step 94 of Figure 7, and it serves to show the different uses of the Header and the ID: After a message is determined to be a tire pressure message via category identification at step 78, a low pressure warning may be displayed “for the particular tire position which sent the message as determined by the identification code incorporated in the transmission,” among other things. Id. at 5:20–23, 5:32–44, Fig. 7.” slip op. at 11

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “We are not persuaded by Signal’s arguments because we do not agree with Signal that Schuermann’s separate interrogation implies that a sign-up procedure is unnecessary. Rather, Schuermann is silent as to whether and how a sign-up procedure would be used, so FCA is correct that Schuermann “leaves it to persons of ordinary skill in the art to use known techniques for accomplishing transponder sign-up.” Pet. Reply 4. As such, we are persuaded by FCA’s rationale that an ordinarily skilled artisan would have had reason to incorporate Mock’s sign-up procedure to ensure reliable identification of tire transmitters. See Pet. 29–30; Ex. 1009 ¶ 35. We additionally agree with FCA that an ordinarily skilled artisan would have appreciated the benefits of adding Mock’s sign-up procedure based on the cost reductions Mock mentions that are associated with a changeable identification code at the tire transmitter. Ex. 1005, 4:47–51. Signal’s counsel conceded that Mock teaches this benefit at the oral hearing. Tr. 38:4–25.” slip op. at 24

  Patent outcomesUS 5,463,374 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 5,463,374
• Qualcomm Inc. v. Bandspeed, Inc.Some claims unpatentable
  PTAB · Sep 7, 2016 · IPR2015-01581 · APJ Patrick M Boucher · IPR · Final written decision

  Claims 9, 10, 12, 21, 22, and 24 are unpatentable; claims 11 and 23 are not shown unpatentable because Cuffaro does not establish the specified vote threshold.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for petitioner

    “1. “hopping sequence” Each of challenged claims 9, 10, 22, and 24 recites a “hopping sequence.” Petitioner’s declarant, Dr. Zhi Ding, attests that the phrase is “a well-understood term of art.” Ding Decl. ¶ 35 (citing Ex. 1016, 127–33). Consistent with Dr. Ding’s testimony, we applied a preliminary construction of “hopping sequence” in the Institution Decision as “the order in which the communications network hops among the set of frequencies.” Dec. 7. That construction is not contested by Patent Owner, and we adopt it for this Final Written Decision.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “Furthermore, Patent Owner’s proposed construction is inconsistent with the construction it agreed to before the district court in the Qualcomm Litigation. In that litigation, the parties agreed that the term “vote” should be construed as “a binary expression (to use or not to use),” a construction that makes no reference to the origin of the “vote” as from a participant or otherwise. Ex. 1018, 6. We see no compelling reason to excuse the inconsistency by adopting a narrower construction when the Board applies a claim-construction standard (broadest reasonable interpretation) that could only result in the same or a broader construction. See Amazon.com, Inc. v. Barnesandnoble.com, Inc., 239 F.3d 1343, 1351 (Fed. Cir. 2001) (“A patent may not, like a ‘nose of wax,’ be twisted one way to avoid anticipation and another to find infringement.” (quoting Sterner Lighting, Inc. v. Allied Elec. Supply, Inc., 431 F.2d 539, 544 (5th Cir. 1970))). Accordingly, we construe “votes to use a particular communications channel” as “expressions of preference for using the particular communications channel.”” slip op. at 10

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “In addressing independent claim 9’s specific requirement that different sets of channels be used with the second and third communications devices, Petitioner reasons that the process summarized above may be applied by the master device to each of the slave devices separately: “the master device of Gerten performs a service discovery request to determine if each slave device has interference avoidance capabilities.” Id. at 19 (emphasis added) (citing Ding Decl. ¶ 53; Ex. 1003, col. 4, ll. 38–51). Thus, Petitioner argues, if one slave has such interference avoidance capabilities, communications with that slave may take place using a modified frequency hopping scheme; if another (legacy) slave lacks such interference avoidance capabilities, communications take place using a normal mode with default communications channels that are not changed based on channel performance. Id. (citing Ding Decl. ¶ 54); see id. at 17–18. Thus, Petitioner concludes, the recited communications with the third communications device over default communications channels occur “while” communicating with the second communications device over the first and second sets of communications channels, as we have construed the term “while.” Petitioner supports this reasoning with testimony by Dr. Ding, which we credit. Id. at 19–20 (citing Ding Decl. ¶¶ 52–54). Patent Owner responds that “the Gerten device is not capable of and expressly teaches away from performing this functionality.” PO Resp. 15 (citing Melendez Decl. ¶ 32). Patent Owner contends that “Gerten’s disclosure is directed toward eliminating channels for use in an entire piconet as opposed to eliminating channels for use by certain participants within a piconet.” Id. (emphasis added). Patent Owner argues that Gerten does not disclose a selection kernel capable of maintaining synchronization between a master and more than one slave in a piconet, with the master and one slave using a default set of channels while the same master and a different slave use a different set of channels. Id. We are not persuaded that the absence of a specific teaching of such a selection kernel supports the conclusion that one of skill in the art would understand Gerten to function in the manner Patent Owner suggests. In this instance, Petitioner refers to two embodiments of Gerten “in which a first participant communicates with a second participant via a normal sequence and with another participant via an adaptive hopping sequence.” Reply 5. First, Figure 3 of Gerten is reproduced below. Figure 3 illustrates “methodology for determining and communicating channels to be avoided to a remote device.” Ex. 1003, col. 2, ll. 4–6. As illustrated in the drawing, a master unit performs a discovery process (block 110) upon connecting with a new slave unit. Ding Decl. ¶¶ 58, 61. If the slave unit is capable of using interference avoidance, the master unit begins the process of determining a modified set of channels for use (block 120). Id. ¶ 46. If a second slave unable to use interference avoidance enters the piconet, standard frequency hopping is used. Supp. Ding Decl. ¶ 9. Under Patent Owner’s characterization of Gerten, entry of the second slave into the network would require the first slave necessarily to revert back” slip op. at 15

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundAnalogous artUnpatentable

    “base station. Ex. 1004, col. 7, ll. 23–47. Because Cuffaro does not limit the type of communications link used for such reporting, Petitioner reasons, and we agree, that “one skilled in the art would consider it obvious for the slave device in Gerten to perform the interference signal strength measurements” and to communicate channel performance data measured by the slave device over one or more of the plurality of communications channels based on the hopping sequence. Pet. 29. Petitioner supports this reasoning with declaration testimony by Dr. Ding. Ding Decl. ¶ 100. Petitioner further provides persuasive reasoning why a person of ordinary skill in the art would have combined the relevant teachings of Gerten and Cuffaro, including that “Cuffaro and Gerten are in the same field of endeavor” of selecting channels to avoid interference in a communications system; that measuring interference signal strength at a slave device such as described by Cuffaro provides a more accurate determination of the impact of the receiver unit from the interference on a given channel, and, therefore, would provide more accurate identification of bad channels in Gerten; and that Gerten suggests such a modification by describing that both a master and a slave can participate in identifying channels to avoid. Pet. 29–31. Petitioner supports this reasoning with declaration testimony by Dr. Ding. Ding Decl. ¶¶ 101, 102. Patent Owner responds by observing that, unlike Gerten, “Cuffaro does not relate to communications systems wherein the devices that are communicating with each other . . . are even transmitting or receiving on the same channels.” PO Resp. 21. Instead, the cellular telephone systems described by Cuffaro use separate physical channels for uplink and downlink. Ex. 1004, col. 4, ll. 9–11. Patent Owner contends that, in Cuffaro, performance data cannot be sent back on the same set of channels on which they were received, and, therefore “[a] mobile station of Cuffaro cannot transmit channel performance data ‘over one or more of the plurality of communications channels.’” PO Resp. 21–22. Dr. Melendez agrees. Melendez Decl. ¶¶ 41–43. Even accepting that Patent Owner’s contention regarding Cuffaro is factually accurate does not lead to the conclusion that Petitioner’s reasoning regarding the combination of Gerten and Cuffaro is deficient. Petitioner does not propose simply to incorporate the performance-data communication mechanism of Cuffaro into the system of Gerten. Rather, Petitioner relies on Cuffaro’s teaching of communicating performance data between devices, and applying that teaching to the system described by Gerten. See Reply 9– 10. That Cuffaro incidentally uses different frequencies for uplink and downlink communications does not diminish the relevance of the teaching identified by Petitioner.” slip op. at 23

  Patent outcomesUS 7,477,624 mixed
  Claim construction§ 102 anticipation§ 103 obviousness
  Patents in suitUS 7,477,624
• Marvell Semiconductor, Inc. / Mediatek Inc. et al. v. Bandspeed, Inc.Some claims unpatentable
  PTAB · Sep 7, 2016 · IPR2015-00314 · APJ Patrick M Boucher · IPR · Final written decision

  Claims 1, 2, 4, 13, 14, 16, 25, 26, 28, and 29 are unpatentable; claims 3, 15, and 27 were not shown unpatentable under the Gerten and Cuffaro obviousness ground.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “sequence.” Petitioner’s declarant, Dr. Zhi Ding, attests that the phrase is “a well-understood term of art.” Ding Decl. ¶ 35 (citing Ex. 1016, 127–33). Consistent with Dr. Ding’s testimony, we applied a preliminary construction of “hopping sequence” in the Institution Decision as “the order in which the communications network hops among the set of frequencies.” Dec. 7. That construction is not contested by Patent Owner, and we adopt it for this Final Written Decision. 2. “votes to use the particular communications channel” The noun phrase “votes to use the particular communications channel” is recited in each of challenged claims 3, 15, and 27. The term “vote” is not defined in the Specification of the ’624 patent. In the Institution Decision, we applied a preliminary construction of “votes to use the particular communications channel” as “expressions of preference for using the particular communications channel,” a construction that rejected Petitioner’s further proposal that the phrase alternatively encompasses indications whether the communications channel is “good or bad.” Dec. 7– 8. The parties do not present arguments that cause us to reconsider that aspect of the construction. Patent Owner “submits that ‘votes to use the particular communications channel’ should be construed to mean ‘expressions of preference of participants for using the particular communications channel,’” with underscoring to indicate words it proposes to add to the Board’s preliminary construction. PO Resp. 6. Patent Owner contends that “all of the embodiments” discussed in the Specification of the ’624 patent “are limited to originating from participant devices involved in the communications and are intended to be used to determine the best channels for communication among those same participants.” Id. This contention is not disputed by Petitioner, and we find no counter examples in the Specification. Patent Owner reasons that omission of reference to participants in the construction of the phrase “would be unduly broad and not supported by the specification and would not be how a [person of ordinary skill in the art] would understand that limitation in view of the specification.” Id. at 7–8 (citing Melendez Decl. ¶ 28). We are not persuaded by this reasoning. As Petitioner observes, the embodiments of the ’624 patent identified by Patent Owner are characterized as “examples,” and a person of ordinary skill “would understand that the example scenarios of the specification are not necessarily limiting on the claims.” Reply 3 (citing Ding Supp. Decl. ¶ 6). In addition, Petitioner notes that claim language in related patents owned by Patent Owner explicitly refers to participants, evidencing Patent Owner’s understanding “how to expressly create participant-specific voting requirements in claims.” Id. at 3.” slip op. at 8

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “Patent Owner responds that “the Gerten device is not capable of and expressly teaches away from performing this functionality.” PO Resp. 15 (citing Melendez Decl. ¶ 33). Patent Owner contends that “Gerten’s disclosure is directed toward eliminating channels for use in an entire piconet as opposed to eliminating channels for use by certain participants within a piconet.” Id. (emphasis added). Patent Owner argues that Gerten does not disclose a selection kernel capable of maintaining synchronization between a master and more than one slave in a piconet, with the master and one slave using a default set of channels while the same master and a different slave use a different set of channels. Id. We are not persuaded that the absence of a specific teaching of such a selection kernel supports the conclusion that one of skill in the art would understand Gerten to function in the manner Patent Owner suggests. In this instance, Petitioner refers to two embodiments of Gerten “in which a first participant communicates with a second participant via a normal sequence and with another participant via an adaptive hopping sequence.” Reply 5. First, Figure 3 of Gerten is reproduced below. Figure 3 illustrates “methodology for determining and communicating channels to be avoided to a remote device.” Ex. 1003, col. 2, ll. 4–6. As illustrated in the drawing, a master unit performs a discovery process (block 110) upon connecting with a new slave unit. Ding Decl. ¶¶ 60, 63. If the slave unit is capable of using interference avoidance, the master unit begins the process of determining a modified set of channels for use (block 120). Id. ¶ 45. If a second slave unable to use interference avoidance enters the piconet, standard frequency hopping is used. Supp. Ding Decl. ¶ 9. Under Patent Owner’s characterization of Gerten, entry of the second slave into the network would require the first slave necessarily to revert back to the default hopping sequence. Id. ¶ 10. This would undermine the stated benefits of Gerten, which explicitly discloses: The above process can be applied to a Bluetooth example and includes identification of a Bluetooth device’s ability to support interference avoidance, the measurements of signal strength on all channels and identification of which channel should not be used without violating the FCC rules, a method of modifying the Bluetooth hop sequence so that it will avoid channels containing strong or fixed interferers while still supporting standard Bluetooth hopping with other non-enabled members of the piconet and a method of relating necessary interference avoidance information to the remote Bluetooth devices. Ex. 1003, col. 4, l. 66–col. 5, l. 9 (emphasis added).” slip op. at 16

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner

    “Nor are we persuaded by Patent Owner’s contention that Gerten teaches away from the claim limitations. See PO Resp. 15. A prior-art reference does not teach away from the claimed subject matter unless the prior-art reference also criticizes, discredits, or otherwise discourages the solution claimed. See In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004). In support of this contention, Patent Owner relies on testimony by Dr. Melendez that “the only selection kernels (Gerten Fig. 6 and Fig. 7) disclosed for the transceiver (Gerten Fig. 2) in Gerten are expressly not capable of providing the subject claimed limitations of the [’]624 patent as is discussed below, and so would serve only to teach away from the claim.” Melendez Decl. ¶ 33. Even if Dr. Melendez’s statement is accurate, such examples in Gerten do not meet the “teaching away” standard because the mere use of examples in a reference that function in a different way does not criticize, discredit, or otherwise discourage the solution claimed. In addition, “[t]eaching away is irrelevant to anticipation.” Seachange Int’l, Inc. v. C-Cor, Inc., 413 F.3d 1361, 1380 (Fed. Cir. 2005).” slip op. at 19

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “Petitioner further provides persuasive reasoning why a person of ordinary skill in the art would have combined the relevant teachings of Gerten and Cuffaro, including that “Cuffaro and Gerten are in the same field of endeavor” of selecting channels to avoid interference in a communications system; that measuring interference signal strength at a slave device such as described by Cuffaro provides a more accurate determination of the impact of the receiver unit from the interference on a given channel, and, therefore, would provide more accurate identification of bad channels in Gerten; and that Gerten suggests such a modification by describing that both a master and a slave can participate in identifying channels to avoid. Pet. 30–31. Petitioner supports this reasoning with declaration testimony by Dr. Ding. Ding Decl. ¶¶ 128, 129. Patent Owner responds by observing that, unlike Gerten, “Cuffaro does not relate to communications systems wherein the devices that are communicating with each other . . . are even transmitting or receiving on the same channels.” PO Resp. 21. Instead, the cellular telephone systems described by Cuffaro use separate physical channels for uplink and downlink. Ex. 1004, col. 4, ll. 9–11. Patent Owner contends that, in Cuffaro, performance data cannot be sent back on the same set of channels on which they were received, and, therefore “[a] mobile station of Cuffaro cannot transmit channel performance data ‘over one or more of the plurality of communications channels.’” PO Resp. 21–22. Dr. Melendez agrees. Melendez Decl. ¶¶ 42–44. Even accepting that Patent Owner’s contention regarding Cuffaro is factually accurate does not lead to the conclusion that Petitioner’s reasoning regarding the combination of Gerten and Cuffaro is deficient. Petitioner does not propose simply to incorporate the performance-data communication mechanism of Cuffaro into the system of Gerten. Rather, Petitioner relies on Cuffaro’s teaching of communicating performance data between devices, and applying that teaching to the system described by Gerten. See Reply 9– 10. That Cuffaro incidentally uses different frequencies for uplink and downlink communications does not diminish the relevance of the teaching identified by Petitioner. For these reasons, we Patent Owner makes too broad a general” slip op. at 24

  Patent outcomesUS 7,477,624 mixed
  Claim construction§ 102 anticipation§ 103 obviousness
  Patents in suitUS 7,477,624
• Kingston Technology Company, Inc. v. Catr Co. Ltd.Some claims unpatentable
  PTAB · May 10, 2016 · IPR2015-00559 · APJ Bart A Gerstenblith · IPR · Final written decision

  Claims 9, 14, 17, 19, and 21–23 are unpatentable as obvious over Matsumiya and Deng and over Wu and Hoogesteger; the remaining challenged claims were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for petitioner

    “1. Level of Ordinary Skill in the Art In our Final Written Decision in IPR 149, we found “that one of ordinary skill in the art would have had a degree in mechanical engineering or industrial design, but also a general understanding of the use of electrical components, which may be incorporated in mechanical designs.” IPR 149 Decision 23. The parties present the same arguments here, with respect to their views of the level of ordinary skill in the art, as they did in IPR 149. Accordingly, for the reasons discussed in our Final Written Decision in IPR 149 we adopt the same level of skill here. Id. at 22–23.” slip op. at 17

  • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

    “Second, Dr. Wolfe testified that Matsumiya discloses “a shaft” that protrudes from each side of the case. Ex. 1016 ¶ 97. On cross-examination, however, Dr. Wolfe admitted that while Matsumiya could disclose a “split axle,” “normally, you’d presume that it’s a through axle.” Ex. 2012, 85:9– 18. Dr. Wolfe did not explain in his direct testimony how either an axle or split axle would be integrated with or attached to at least one side of the case. Third, Petitioner relied on the express disclosure of Matsumiya, not a modification of Matsumiya, as teaching this element of the claims. See Pet. 16 (relying only on Matsumiya’s disclosure). In its Reply, Petitioner asserts, for the first time, that Matsumiya “could also use a snap hinge,” pointing to Professor Visser’s cross-examination testimony. Reply 13 (citing Ex. 1050, 127:9–11). Professor Visser’s testimony, however, does not support Petitioner’s argument. Professor Visser testified that Matsumiya does not show a snap-on hinge, and that a snap-on hinge would not have the same functionality as an axle. Ex. 1050, 127:18–21. He also testified that the two concentric rings on the arms of Matsumiya are inconsistent with a snap-on hinge. Id. at 128:17–20. Thus, the issue before us is not whether it would have been obvious to modify Matsumiya to include a snap-on hinge or hinge protuberance on the side of the case because that was not the basis set forth in the Petition and upon which we instituted review; rather, the issue is whether Petitioner has shown that Matsumiya discloses a hinge element or hinge protuberance integrated with or attached to at least one side of the case. In light of the record before us, and as detailed in the discussion above, we conclude that Petitioner has not shown that Matsumiya discloses a hinge element or a hinge protuberance “formed on at least one side of the case.” We find that Petitioner has failed to present sufficient evidence to show that Matsumiya discloses this element of the claims, and we find Patent Owner’s evidence in the form of Dr. Wolfe’s cross-examination testimony and Professor Visser’s testimony more persuasive.” slip op. at 22

  • Obviousness (§103) › Analogous artNon analogous artDecided for patent owner

    “Id. at 1:14–23. Accordingly, we find that Kindig’s field of endeavor is hinged enclosures to house appliances that make noise when operated. The ’544 patent states that “[t]he present invention relates to a flash memory apparatus, and more particularly to a flash memory apparatus, wherein a cover is not completely separated from the main body upon being in use so that lost [sic] of the cover is prevented.” Ex. 1001, 1:8–11. The ’544 patent is largely directed to a cover that rotates with respect to a case (as is evident from the parties’, and consequently our, extensive discussion of the hinged connection (i.e., hinge protuberances and hinge holes)), but is not readily disconnected. In fact, the ’544 patent discloses the recited “hooking groove” and “hooking threshold” specifically to prevent the hinge hole from being easily detached from the hinge protuberance. Id. at 3:36–43 (“Furthermore, a hooking groove 34 is preferably formed on the lower periphery of the hinge protuberance 33. A hooking threshold 45 is hooked on the hooking groove 34 and is preferably formed on a rim confining the hinge hole 41 in order to prevent the hinge hole 41 from being easily detached from the hinge protuberance 33 after joining of the hinge hole 41 and the hinge protuberance 33.”). Thus, we find that the ’544 patent’s field of endeavor is hinge assemblies for a flash memory apparatus.” slip op. at 32

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

    “Second, Petitioner asserts that Kindig’s hinge connection “would advantageously help to retain connection between the cover of Matsumiya and the memory card,” id. at 25, but Petitioner has not shown that Matsumiya fails to retain the connection between case and cover or has difficulty doing so. Rather, from our review the record supports that Matsumiya’s cover is securely attached to the case. Additionally, we are unaware of any teaching in Matsumiya of disconnecting the cover from the case. Similarly, the ’544 patent aims to avoid disconnecting the cover from the case, as discussed above. Kindig, however, is directed to an easily detachable cover. Accordingly, Petitioner’s reason—as to why one of ordinary skill in the art would have been prompted to modify Matsumiya by adding the elements of claim 13 from Kindig—lacks a rational underpinning. 3. Conclusion of Obviousness For the foregoing reasons, after consideration of the entire record, we” slip op. at 35

  Patent outcomesUS 6,926,544 mixed
  § 103 obviousnesscites KSR · Graham
  Patents in suitUS 6,926,544

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.