- Axon Enterprise, Inc. / Dedrone Holdings, Inc. et al. v. Airspace Defense, Inc.Some claims unpatentablePTAB · Oct 6, 2026 · IPR2025-00629 · APJ Scott C Moore · IPR · Final written decision
Original claim 12 is not unpatentable; substitute claim 37 is added, while substitute claims 21–28 and 30–36 are denied as obvious.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“F.3d at 1279–80, we begin our analysis with the Specification of the ’711 Patent. The Specification indicates when a UAV (such as the recited “reference aerial vehicle”) navigates autonomously, it flies without manual control, and can, for example, track and fly to a target using information captured onboard the vehicle itself. See Ex. 1001, 3:24–28 (“[I]t may not be desirable to manually control the interceptor aerial vehicle to follow the target UAV. In some embodiments, the interceptor aerial vehicle is able to autonomously track and fly to the target UAV using machine vision based on images captured by a camera of the interceptor aerial vehicle.”). The Specification also indicates that “autonomous” means more than just “automatic flight,” and clarifies that autonomous navigation occurs when a UAV that previously received a target location from an external source subsequently turns and flies itself towards the received location. See, e.g., id. at 4:15–17 (disclosing that the detected location of a target may be provided to an interceptor “to allow it to automatically and autonomously fly toward the direction of the detected location”); 15:64–16:3 (automatic and autonomous navigation occurs when an interceptor’s navigation component and/or flight controller receive the location of a target, and adjust the interceptor “to turn and fly towards the received location . . . based on the received location”); 16:49–60 (“For example, a flight direction and/or speed of an interceptor aerial vehicle are automatically and autonomously adjusted based on a location and size of the target within the captured image. . . . This allows the flight path of the interceptor aerial vehicle to be dynamically adjusted to track and follow a moving target.”).” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable
“have had reason to combine Beard and Laufer in the manner proposed by Petitioner, the combination would not satisfy the Autonomous Navigation limitation required by claim 12 because Laufer’s autopilot commands are generated by and transmitted from a remote command center (i.e., Laufer’s central controller 115). PO Resp. 15–16. In its Reply, Petitioner does not dispute that Laufer’s autopilot commands are generated by Laufer’s central controller 115, which is remote from the aircraft being controlled. See Reply 13–17. Petitioner asserts, however, that the combination still satisfies the Autonomous Navigation limitation because these autopilot commands are generated without human input. See id. Based on the complete trial record, Patent Owner’s arguments are persuasive. See PO Resp. 15–16; PO Sur-reply 42, 1–6; Ex. 2025 ¶¶ 84–87. The flight of Beard’s UAV 100 under the control of Laufer’s autopilot commands does not satisfy the Autonomous Navigation limitation of claim 12, as we have construed that limitation, because Laufer’s autopilot commands are generated at a location that is remote from UAV 100 (Laufer’s central controller 115.) See, e.g., Ex. 1010 ¶ 40 (“Central controller 115 uses autopilot command module 440 to generate autopilot aircraft commands”), ¶¶ 26, 30 (clarifying that central controller 115 and the controlled interceptor aircraft are separate devices that may communicate through a “wireless connection”), Fig. 4 (depicting “aircraft control commands 475” being generated externally from the depicted “Interceptor Aircraft”); see also Ex. 2025 ¶¶ 95–95. Petitioner never disputes that, in the proposed combination, Laufer’s central controller 115 would remain external to Beard’s UAV 100. See Reply 13–17. Instead, Petitioner relies on its proposed construction of the Autonomous Navigation limitation, which would have encompassed such an arrangement. See id. Our construction of the Autonomous Navigation limitation, which did not adopt Petitioner’s claim construction position, is dispositive of Petitioner’s argument. We thus determine that Petitioner has not shown by a preponderance of the evidence that claim 12 would have been obvious over Beard and Laufer.” slip op. at 15
- PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend granted in partGranted in part
“the legal requirements set forth in 35 U.S.C. § 316(d) and 37 C.F.R. § 42.121. Lectrosonics, Paper 15 at 4, 7–8. For the reasons that follow, we determine that Patent Owner has satisfied this burden. 1. Proposal of a Reasonable Number of Substitute Claims A motion to amend must “propose a reasonable number of substitute claims.” 35 U.S.C. § 316(d)(1)(B); see also 37 C.F.R. § 42.121(a)(3) (“A motion to amend may cancel a challenged claim or propose a reasonable number of substitute claims.”). “There is a rebuttable presumption that a reasonable number of substitute claims per challenged claim is one (1) substitute claim.” Lectrosonics, IPR2018-01129, Paper 15 at 4; see also 37 C.F.R. § 42.121(a)(3). Patent Owner has shown it proposes a reasonable number of substitute claims by proposing a single substitute claim for each of challenged claims 1–4, 8–11, and 13–20. MTA 1–2, Claims App. Petitioner does not argue otherwise. See generally MTA Opp. We determine that Patent Owner meets this requirement. 2. Amendments Respond to a Ground of Unpatentability “A motion to amend may be denied where … [t]he amendment does not respond to a ground of unpatentability involved in the trial.” 37 C.F.R. § 42.121(a)(2)(i). Patent Owner has responded to the grounds of unpatentability involved in this proceeding by amending the claims in response to the Petition’s asserted prior art. See MTA 2, 25, Claims App. Petitioner does not argue otherwise. See generally MTA Opp. We determine that Patent Owner meets this requirement. 3. No Enlargement of the Scope of the Claims An amendment may not seek to enlarge the scope of the claims of the patent. 35 U.S.C. § 316(d)(3); 37 C.F.R. §§ 42.121(b)(1)–(b)(2). Patent Owner asserts that the amendments in the Motion do not enlarge the scope of the claims of the patent because each proposed substitute claim “retains all of the limitations of the corresponding challenged claim, and each proposed independent substitute claim adds further limitations.” See MTA 2, Claims App. Petitioner does not argue otherwise. See generally MTA Opp. We determine that Patent Owner meets this requirement. 4. No Introduction of New Matter An amendment may not introduce new matter. 35 U.S.C. § 316(d)(3);” slip op. at 22
- 112 supportDecided for patent owner
“Having considered the evidence and argument cited by both parties, we determine there is sufficient written description support for the disputed portions of limitations [37.e1], [37.e3,] and [37.e4]. The ’452 application discloses selecting between groups of processing schemes (e.g., algorithms) depending on a confidence level, where the groups are, for example: high cost, high robustness algorithms; medium cost, medium robustness algorithms; and low cost, low robustness algorithms. See Ex. 2019 ¶¶ 146–147. These schemes or algorithms may be neural networks. See, e.g., id. ¶ 50 (including neural network as a type of algorithm); see also id. ¶¶ 109–110); see generally MTA Opp 1 (not disputing that schemes may be neural networks). Specifically, the ’452 application describes “algorithms that process video frames of one or more video data streams,” and “produce a prediction of objects within the video f[r]ame, as well as a confidence number that is a measure of quality for that prediction.” Id. ¶ 141. The ’452 application also discloses the concept of switching between neural networks based on confidence levels. In particular, the ’452 application discloses that a “process cycles through the processing schemes to produce a detection of an object,” for example, where “if the confidence number is higher than an activation number, an action is performed to stop or change a running group (i) and select or switch to group (ii).” Id. ¶ 146. More particularly, “a processing scheme from the group of (i) High cost (low refresh rate), high robustness algorithm[s] can select a cheaper processing scheme from the group of (ii) Medium cost, medium robustness algorithms.” Id. The ’452 application additionally discloses that schemes or algorithms (e.g., neural networks) are applied to individual video frames, and that the confidence levels that determine which neural network will be applied in the future are also derived from individual video frames. For example, as discussed above, the ’452 application describes that “[t]he processing schemes produce a prediction of objects within the video f[r]ame, as well as a confidence number that is a measure of quality for that prediction.” Ex. 2019 ¶ 141 (emphases added). The ’452 application also describes selecting and applying an individual neural network, rather than only selecting and applying a group of processing schemes. For example, as highlighted above, the ’452 application describes that “a processing scheme from the” “High” group “can select a cheaper processing scheme from the” “Medium” group. Id. ¶ 146 (emphases added). In our view, these disclosures, read together, would reasonably convey to one skilled in the art that the inventor had possession of the disputed subject matter described above. See Ariad, 598 F.3d at 1351.” slip op. at 24
Patent outcomesUS 10,514,711 mixedClaim construction§ 103 obviousness§ 112 disclosurecites Phillips · Graham · NautilusPatents in suitUS 10,514,711 - PTAB · Oct 6, 2026 · IPR2025-00530 · APJ Scott C Moore · IPR · Final written decision
Original claims 1–9 were canceled; the non-contingent motion to add substitute claims 10–18 was denied for lack of written-description support, and claim 18 was also indefinite.
RulingsFinal written decision- 112 supportMotion to amend, deniedDenied
“that either the ’303 application or the ’838 provisional contain adequate written description support for the disputed feature of limitation [10.d]. Though the disclosures cited by Patent Owner indicate that a secondary identifier can be used to aid in verification of a UAV, these disclosures also make clear that both first and second identifiers are transmitted by and received from the UAV. See, e.g., Ex. 2002, 4:15–17, 30:24–31:6; Ex. 2003 ¶¶ 14, 66. Patent Owner’s reliance on disclosure characterized as transmitting an identifier from a remote computing system “through the UAV” (Reply 2) is not persuasive. The cited disclosures from the ’303 application and ’838 provisional generally disclose that the identifiers transmitted by a UAV can be “generated remotely,” such as by a “remote computing system.” Ex. 2002, 14:23–15:2; Ex. 2003 ¶ 45. But Patent Owner has not identified disclosure indicating that a remote computing system may transmit an identifier to the identification receiver. In the ’303 application and ’838 provisional, only the UAV (which is part of the discrimination system, and thus not “remote”) actually transmits identifiers to the identification receiver. Patent Owner is correct in its assertion that an “aerial system identifier can be generated on-board the aerial system” or “generated remotely . . . at a remote computing system.” Mot. 7 (citing Ex. 2002, 14:23–15:2; Ex. 2003 ¶ 45). But even if a UAV’s identifier was at some time in the past generated by a remote computing system, the subsequent transmission of that identifier from the UAV to the identification receiver would not satisfy the plain language of limitation [10.d]. The claim language “receive … a second identifier from a computing system that is remote to the discrimination system” requires the receipt of a transmission of the second identifier from a remote computing system. This claim language limits the source of the received transmission (i.e., where the particular transmission is “receive[d] … from”). Thus, the relevant issue is from where was the recited second identifier received. The relevant is not where the second identifier was originally generated.” slip op. at 12
- Disclosure Requirements (§112) › Definiteness (Nautilus)DefiniteIndefiniteMixed
“We determine that the disputed language in limitation [10.d] is not indefinite. There is no recitation in proposed substitute claim 10 that the second identifier is transmitted solely from the identifier transmission system. Thus, the alleged irreconcilable contradiction cited by Petitioner is not recited in the claims. Petitioner’s position appears to rest on the fact that the ’303 application and ’838 provisional do not disclose receiving the second identifier from a remote computing system. See Sur-reply 6 (“To manufacture written description support, [Patent Owner] argues the claim encompasses identifiers routed ‘through the UAV.’”). Though we agree that limitation [10.d] lacks adequate written description support, this defect does not render the claim indefinite because the scope of limitation [10.d] is otherwise reasonably certain based on its plain language. See supra § III.C.4.” slip op. at 18
- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportReference not prior artPriority date, deniedDecided for patent owner
“In contrast, the ’393 provisional never discloses that the described drone defense system may use the identity of a detected drone to develop a particular countermeasure. The disclosed RTSS certainly uses identity information to determine whether a drone is a threat. And if a threat is identified, the RTSS immediately starts “a series of processes … to determine what rule of engagement will be applied on the intruding drone.” Ex. 1006 ¶ 10. The ’393 provisional discloses that the system may select a particular countermeasure based on (i) the particular zone within a protected area within which a drone is located, (ii) “the behavior of the hostile drone,” or (iii) “other instructions.” Id. ¶¶ 9, 10. But the ’393 provisional never discloses that these “other instructions” may include the identity of the drone. The system disclosed in the ’393 provisional uses the identity of a drone to determine whether to activate the countermeasure system. See id. ¶¶ 16–18. But there is no disclosure in the ’393 provisional that the countermeasure system, once activated, uses the identity of the drone to develop the particular countermeasure to be employed. See generally Ex. 1006. Thus, though the Whitmarsh reference itself contains ample written description support for limitation [19e], the earlier-filed ’393 provisional does not. On this record, and having reviewed the ’393 provisional in its entirety, we determine that the ’393 provisional does not “reasonably convey[] to those skilled in the art that the inventor had possession of” the subject matter of limitation [19e] of Whitmarsh’s claim 19 “as of the filing date” of the ’393 provisional. See Ariad, 598 F.3d at 1351.” slip op. at 27
§ 102 anticipation§ 112 disclosurecites NautilusPatents in suitUS 10,249,199 - PTAB · Oct 6, 2026 · IPR2025-00525 · APJ Scott C Moore · IPR · Final written decision
Original claim 21 was canceled; the Board denied substitute claim 22 for new matter and held it obvious under §103 based on six combinations.
RulingsFinal written decision- 112 supportMotion to amend, deniedDenied
“First, Patent Owner has not shown possession of the disputed feature of a “radio communication module [that] is configured to utilize a secure identifier, the secure identifier comprising a specified excitation.” In the ’406 application, the term “excitation” is used exclusively to refer to a light beam signal. See Ex. 2015, 7:8–13, 9:8–10, 23:9.2 The ’406 application discloses that an identification box on an aircraft may include both an RF module and a separate light sensor. See Ex. 2015, 7:3–11. But nowhere does the ’406 application describe receiving a light beam (e.g., an excitation) with the RF module of the identification box (as opposed to the light sensor), so as to provide support for proposed substitute claim 22’s recitation of a “radio communication module” configured to utilize “a secure identifier . . . comprising a specified excitation.” We disagree with Patent Owner that it suffices that one of ordinary skill in the art “would recognize that these disclosures are equally applicable to the RF-only embodiments” (Reply 5). “It is not sufficient for purposes of the written description requirement . . . that the disclosure, when combined with the knowledge in the art, would lead one to speculate as to modifications that the inventor might have envisioned, but failed to disclose.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997). On this record, and having reviewed the ’959 Patent, the ’153 provisional, and the ’406 application, we find no evidence in those documents that the named inventor was in possession of the concept of a radio communications module “configured to utilize a secure identifier” where “the secure identifier compris[es] a specified excitation.” Second, setting aside the “radio communication module” in proposed substitute claim 22, Patent Owner also has not shown that the named inventor was in possession of the feature of a “secure identifier comprising a specified excitation.” Patent Owner’s argument that the ’406 application describes a light beam directed to a particular aircraft (see Reply 4–5) is 2 The same is true of the ’153 provisional. See Ex. 2016 ¶¶ 29, 34. unavailing. The fact that the properties of a particular light beam indicate that the light beam is intended for a particular aircraft does not demonstrate that the light beam is a “secure identifier,” as we have construed that term. Patent Owner has not identified any disclosure in the ’406 application of a “secure identifier” comprising a light beam, let alone that such light beam can be utilized by a “radio communication module.” The only references to “secure” identifiers in the ’406 application describe radio frequency signals. See Ex. 2015, 2:4–6, 15:21–17:12.3 Having reviewed the ’959 Patent, the ’153 provisional, and the ’406 application, we find no evidence in those documents that the named inventor was in possession of the concept of a “secure identifier comprising a specified excitation.”” slip op. at 15
- ScopeDecided for patent owner
“not impermissibly broaden the scope of the claims of the ’959 Patent. As Patent Owner suggests, there were no limitations in original claim 21 on the type of radio signal the radio communication module could receive, and so it follows that proposed substitute claim 22 does not now encompass receiving a broader set of radio signals. We see no basis for Petitioner’s argument that the past tense verb “received” limited original claim 21 to “signals of a compatible ‘type’ and ‘range.’” Opp. 7. Moreover, the claim language (with the proposed deletion shown double brackets) provides that “the radio communication module is configured to receive a [[received]] radio signal.” Any radio signal that the radio communications module receives would necessarily be a “received” radio signal. Thus, deleting the redundant word “received” does not enlarge the scope of this claim limitation. We also are not persuaded by Petitioner’s suggestion that removing the term “received” broadens original claim 21 by deleting a requirement that the radio signal have already been previously received by the claimed device. See Sur-reply 9. Original claim 21 simply recited, using redundant language, that “the radio communication module is configured to receive a received radio signal.” Ex. 1001, 18:5–7. The most natural reading of this language is that the phrase “received radio signal” is just a description of a radio signal that is received by the recited radio communications module. Petitioner has cited no persuasive evidence that one of ordinary skill in the art would have counterintuitively interpreted this language to impose an additional requirement that the “received radio signal” must have been received twice—a first time by some other component of the device, and a second time by the recited radio communication module. Accordingly, we determine that the proposed amendment does not improperly broaden claim scope.” slip op. at 10
- Disclosure Requirements (§112) › Definiteness (Nautilus)IndefiniteNot shown unpatentable
“572 U.S. 898 (2014). See Memorandum: Approach to Indefiniteness Under 35 U.S.C. § 112 in AIA Post-Grant Proceedings (Jan. 6, 2021).4 Under Nautilus, a claim is indefinite if fails to “inform those skilled in the art about the scope of the invention with reasonable certainty.” 572 U.S. at 910. We agree with Patent Owner that neither of the identified terms are indefinite. Regarding the term “low-altitude aircraft,” we determine the Specification provides a sufficient basis for understanding the scope and meaning of this term with reasonable certainty. The U.S. Court of Appeals for Federal Circuit has explained that, when a term of degree is recited in a claim, it is necessary “to determine whether the patent’s specification provides some standard for measuring that degree.” See Seattle Box Co. v. Indus. Crating & Packing, Inc., 731 F.2d 818, 826 (Fed. Cir. 1984); see also Datamize, LLC v. Plumtree Software, Inc., 417 F.3d 1342, 1350 (Fed. Cir. 2005) (“Some objective standard must be provided in order to allow the public to determine the scope of the claimed invention.”). Here, the Specification describes the related art as including “small UASs (e.g., aircrafts up to 25 pounds flying up to 500 ft of the low altitude airspace).” Ex. 1001, 1:50–52. One of ordinary skill in the art would understand from the Specification that the cited disclosure provides an objective standard for determining the scope of a low-altitude aircraft as one that is designed to fly up to a maximum altitude of about 500 feet.” slip op. at 20
- Skill levelSkill level petitioner adoptedDecided for petitioner
“In our Institution Decision, we adopted Petitioner’s proposal that one of ordinary skill in the art would have had the following qualifications: [E]ither (1) a Bachelor of Science in Mechanical Engineering, Electrical Engineering, Aerospace engineering, or an equivalent field, as well as at least 2 years of academic or industry experience in the aerospace, avionics, telecommunications, or electronic device manufacturing industry, or (2) at least four years of industry experience in any of the above industries. Paper 13, 5 (citing Pet. 21). Patent Owner has not disputed this formulation; thus, we adopt it for purposes of this Decision. See Paper 13, 10–11 n. 8.” slip op. at 23
§ 103 obviousness§ 112 disclosurecites Graham · NautilusPatents in suitUS 10,713,959 - Posco Co., Ltd. v. ArcelormittalAll claims unpatentablePTAB · Jul 16, 2026 · IPR2025-00371 · APJ Brian D Range · IPR · Final written decision
Claims 1–25 are unpatentable as obvious under § 103 over the asserted combinations of Takagi, Cornette, Suehiro, GMW14400, Laurent, and Vaissiere.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶ 15). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’227 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner
“1. superficial layer The only independent claim at issue, claim 1, recites a “Superficial layer.” Ex. 1001, 15:6. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’227 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10
- Claim Construction › Extrinsic evidence (dictionaries, experts)Term construed petitioner constructionDecided for petitioner
“defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the extrinsic sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions). Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’227 patent, we focus on the patent claims and specification. Claim 1 indicates that the intermetallic layer has a “mean composition” (emphasis added). Ex. 1001, 15:1–10. This indicates, albeit weakly, that iron composition across the layer may vary rather than having ordered stoichiometry—consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Ex. 1001, 2:47–50. Meanwhile, nothing in the ’227 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Rabbe’s testimony. Dr. Rabbe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’227 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:60–64 (“FIG 2. Illustrates a coating … which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076 ¶ 166; Ex ¶ 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s construction of “intermetallic” for this proceeding does not fully account for the ’227 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently mean compositions) different labels.” slip op. at 16
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“Because IHS was a company that created an online database with the purpose of providing (selling) standards including General Motors standards to the public, we determine that a person of ordinary skill in the art would have known to look to this database and would have been able to find GMW14400. Patent Owner presents no evidence to the contrary. Because a preponderance of the evidence supports Petitioner, we determine Petitioner establishes GMW14400 is qualifies as prior art.” slip op. at 21
Patent outcomesUS 11,326,227 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,326,227 - Posco Co., Ltd. v. ArcelormittalAll claims unpatentablePTAB · Jul 16, 2026 · IPR2025-00370 · APJ Brian D Range · IPR · Final written decision
Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶¶ 13–16). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’602 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“1. superficial layer All independent claims at issue, claims 1, 21, and 24, recite a “superficial layer.” Ex. 1001, 15:11, 16:60, 17:21. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’602 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions) Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’602 patent, we focus on the patent claims and specification. The claims indicate that the intermetallic layer has a “mean iron composition” (emphasis added). Ex. 1001, 15:6–10. This indicates, albeit weakly, that the iron composition across the layer may vary rather than having ordered stoichiometry— consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Id. at 2:50–54. Meanwhile, nothing in the ’602 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Raabe’s testimony. Dr. Raabe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’602 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:57–61 (“FIG 2. Illustrates a coating . . . which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076, 166; Ex. 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s definition of “intermetallic” does not fully account for the ’602 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently defined mean iron compositions) different labels.” slip op. at 16
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 28– 42; Ex. 1016 ¶ 35; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13). In particular, Petitioner argues that Takagi discloses a pre-coating thickness of 10–20 µm but does not explicitly disclose a post hot-stamping coating thickness corresponding to the pre-coating thickness. Pet. 11. Cornette teaches that the hot-stamping thickness causes coating expansion from 25 µm to about 40 µm, an increase of 60%. Id. (citations omitted). Petitioner and Dr. Miles reason that, when hot stamping Takagi’s product, the thickness would be 32 µm. Id. (citing Ex. 1003 ¶ 32); see also Pet. Reply 20–21. Thus, Patent Owner argues that Cornette evidences Takagi’s finally coating thickness without requiring modification of Takagi. Petitioner further argues that Takagi and Cornette teach that post hot- stamping thickness could be varied and optimized as a result effective variable. Id. at 12–13; see also Pet. Reply 17–18. Cornette teaches, for example, that “[t]he average [pre-coating] layer thickness showing the best compromise between corrosion protection and weldability is 25 µm” and links this pre-coating thickness to a final thickness of “about 40 µm at the steel surface.” Ex. 1014, 9. Petitioner also argues that it would have been obvious to fill in other details of Takagi including, for example, selecting USIBOR 1500 steel, based on the teachings of Cornette. Pet. 14. Patent Owner argues that there is no reason to combine Takagi with the teachings of Cornette. PO Resp. 26. Patent Owner makes seven related arguments. Patent Owner first argues that the Petitioner’s position is speculative and lacks basis. Id. at 26–27. We disagree. Cornette evidences a final coating thickness for Takagi, and the references also suggest that final coating thickness is result effective. Second, Patent Owner argues that there would have been no incentive to seek a motivation to seek a thicker coating post-hot stamping. Id. at 28– 35. This argument does not undermine Petitioner’s position that Takagi, by itself, would have reached a thicker coating after stamping as evidenced by Cornette. Pet. 11–12. Petitioner takes the position, with evidence, that practice of Takagi alone would reach the recited thickness. No motivation to modify Takagi is required under this position.” slip op. at 25
Patent outcomesUS 10,961,602 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,961,602 - Tanklogix, LLC v. Sitepro, Inc.Institution deniedPTAB · Oct 10, 2025 · IPR2025-00653 · APJ Bart A Gerstenblith · IPR · Institution
The Board denied institution on all claims because the Petition did not show a reasonable likelihood that any challenged claim was unpatentable over the asserted grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“An inter partes review may be instituted only if “the information presented in the petition . . . and any [preliminary] response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2024). For the reasons given below, on this record Petitioner has not established a reasonable likelihood that it would prevail in showing the unpatentability of any of the Challenged Claims. Accordingly, we do not institute an inter partes review.” slip op. at 2
- Skill levelSkill level patent owner adoptedDecided for patent owner
“The parties’ proposed levels of ordinary skill in the art are similar, although Patent Owner proposes two years of experience along with a bachelor’s degree whereas Petitioner proposes “significant” experience. Patent Owner also proposes an alternative with more extensive experience in lieu of a bachelor’s degree. Although we find Petitioner’s proposed qualifications acceptable, we adopt Patent Owner’s proposed qualifications for the purposes of this Decision because they offer a wider range of qualifications that nonetheless comport with the level of ordinary skill necessary to understand and implement the teachings of the ’504 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978). Our analysis and findings herein, however, do not turn on any differences in the parties’ proposed qualifications.” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Additionally, only terms that are in controversy need to be construed, and these need be construed only to the extent necessary to resolve the controversy. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). The parties assert that each claim term should be construed in accordance with its plain and ordinary meaning. Pet. 9; Prelim. Resp. 4 (citing Ex. 2009 ¶ 72); see Ex. 1002 ¶ 22 (opining the same). And, in the respective claim construction sections of their briefs, the parties do not propose any claim terms for express construction. We agree with the parties that no claim terms require express construction to resolve the controversy before us. See Realtime Data, 912 F.3d at 1375.” slip op. at 13
- Expert testimonyPetitioner expert discountedDecided for patent owner
“Ex. 1002 ¶ 47. As reflected above, Dr. Wooley’s testimony as to element [1.2] does not even assert that Cardamone discloses a tank, let alone one or more sensors disposed at a tank as recited in element [1.2]. Thus, Dr. Wooley’s testimony does not support Petitioner’s argument on this issue.” slip op. at 18
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,726,504 - Tanklogix, LLC v. Sitepro, Inc.Institution deniedPTAB · Oct 10, 2025 · IPR2025-00652 · APJ Bart A Gerstenblith · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–23 and 25–30 were unpatentable over the asserted grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsDenied
“presented in the petition . . . and any [preliminary] response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2024). For the reasons given below, on this record Petitioner has not established a reasonable likelihood that it would prevail in showing the unpatentability of any of the Challenged Claims. Accordingly, we do not institute an inter partes review.” slip op. at 2
- Skill levelSkill level patent owner adoptedDecided for patent owner
“The parties’ proposed levels of ordinary skill in the art are similar, although Patent Owner proposes two years of experience along with a bachelor’s degree whereas Petitioner proposes “significant” experience. Patent Owner also proposes an alternative with more extensive experience in lieu of a bachelor’s degree. Although we find Petitioner’s proposed qualifications acceptable, we adopt Patent Owner’s proposed qualifications for the purposes of this Decision because they offer a wider range of qualifications that nonetheless comport with the level of ordinary skill necessary to understand and implement the teachings of the ’403 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978). Our analysis and findings herein, however, do not turn on any differences in the parties’ proposed qualifications.” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“The parties assert that each claim term should be construed in accordance with its plain and ordinary meaning. Pet. 10; Prelim. Resp. 4 (citing Ex. 2009 ¶ 73); see Ex. 1002 ¶ 22 (opining the same). And, in the respective claim construction sections of their briefs, the parties do not propose any claim terms for express construction. We agree with the parties that no claim terms require express construction to resolve the controversy before us. See Realtime Data, 912 F.3d at 1375.” slip op. at 13
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“We agree with Patent Owner that the Petition fails to demonstrate that Kahn discloses element [1.2] because the evidence cited does not disclose a “first computer system being configured to provide remote control of the first pump or first valve” (i.e., a fluid-handling device). Kahn is directed to providing access to fluid sensing data and analyzing and providing visual information on that data, but Petitioner has not identified any disclosure of the capability to remotely control fluid-handling devices. See, e.g., Ex. 1005, code (54), 1:27–36, 2:50–3:2. More specifically, Kahn’s disclosures that Petitioner relies on for allegedly teaching remote control are deficient. We discuss each. First, Petitioner points to the following, “[f]or instance, as illustrated in FIG. 1C, a fluid control device such as a valve 15A is located on the input side of a sen[s]or unit 110.” Ex. 1005, 8:19–21, cited in Pet. 13. This portion of Kahn, however, does not disclose remote control. Second, Petitioner cites to the following: Finally, or in addition to, the communication unit 112B can include on-site alerts such as optical (indicator lights), audible alerts (e.g., alarm sounds), tactile (e.g., vibration of the unit) or can be interfaced to an appropriate control valve for simply shutting off the supply of fluid upon the detection of emergency events, for instance. Pet. 13 (citing Ex. 1005, 10:62–67). We agree with Patent Owner that this portion of Kahn teaches on-site alerts and local control of the fluid-handling device. See Prelim. Resp. 7. This portion of Kahn does not disclose remote control.” slip op. at 18
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,294,403 - Tanklogix, LLC v. Sitepro, Inc.Institution deniedPTAB · Oct 10, 2025 · IPR2025-00651 · APJ Bart A Gerstenblith · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–3, 6, 7, and 9–20 were unpatentable over any asserted ground.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsDenied
“presented in the petition . . . and any [preliminary] response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2024). For the reasons given below, on this record Petitioner has not established a reasonable likelihood that it would prevail in showing the unpatentability of any of the Challenged Claims. Accordingly, we do not institute an inter partes review.” slip op. at 2
- Skill levelSkill level patent owner adoptedDecided for patent owner
“The parties’ proposed levels of ordinary skill in the art are similar, although Patent Owner proposes two years of experience along with a bachelor’s degree whereas Petitioner proposes “significant” experience. Patent Owner also proposes an alternative with more extensive experience in lieu of a bachelor’s degree. Although we find Petitioner’s proposed qualifications acceptable, we adopt Patent Owner’s proposed qualifications for the purposes of this Decision because they offer a wider range of qualifications that nonetheless comport with the level of ordinary skill necessary to understand and implement the teachings of the ’680 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978). Our analysis and findings herein, however, do not turn on any differences in the parties’ proposed qualifications.” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“target value” is part of a command that is sent from a computing device to a server and then to a controller. The controller then receives a measurement of the fluid by a sensor and determines whether the measurement satisfies the “target value.” If the measurement does not satisfy the “target value,” further operations are undertaken. The recited operation sequence makes clear that the plain and ordinary meaning of “target value” is not as Dr. Wooley opines because the particular operating condition that a device is in at a particular time is represented by the measurement taken by the sensor, 11 Some claim language less relevant to construing “target value” was omitted for ease of reference. which the controller then uses to determine whether the measurement satisfies the “target value.” Additionally, claim 1 recites that the “target value” is sent as part of a command to the controller. The “target value” is not sent to the controller from the sensor, as might be expected if the plain and ordinary meaning of “target value” were as Dr. Wooley opines. Petitioner and Dr. Wooley’s construction would also result in “target value” meaning effectively the same thing as the measurement of the fluid by the sensor, a concept that is separately recited in claim 1 and to which the “target value” is compared. The Specification of the ’680 patent does not support Petitioner’s understanding of the plain and ordinary meaning of “target value.” Although the Specification does not recite “target value,” it recites “target state,” and describes “target state” sufficiently to understand the plain and ordinary meaning of “target” as used in “target value” and “target state.” In particular, the ’680 patent explains that “[i]n some embodiments, the process 104 includes receiving, via a network interface, from a remote user device, (e.g., via a command-center server) a command to change a state of a fluid-handling device to a target state.” Ex. 1001, 11:48–51. This portion reflects that the command is seeking to change a state of a fluid-handling device to a target state. In other words, the “target value” or “target state” is not generally “the particular operating condition that a device is in at a particular time”; rather, it is a value or state that the fluid-handling device is desired to be in, as Patent Owner and Dr. Durham explain. Additionally, just as claim 1 recites a directional component for the “target value” to be sent to the controller in a command, so too does the Specification describe a “target state” as being sent in a command from a remote user device. Thus, the Specification clearly supports the plain and ordinary meaning proposed by Patent Owner and Dr. Durham and not the plain and ordinary meaning proposed by Petitioner and Dr. Wooley. slip op. at 14
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“time-stamped process data, report exception therein to the remote host, and extract and transmit time-stamped process data to the remote host.” Ex. 1005, Abst. (emphases added). Almadi explains that its remote field systems must include a plurality of controller units “to issue commands to, and gather and process data from a plurality of field devices, including remote systems and instruments, . . . [and] a database server for the storage of process data retrieved from the remote subsystems and instruments.” Id. at 2:22–30 (emphases added). Based on these disclosures, we agree with Patent Owner that Petitioner has not established that Almadi discloses element [1.4]. Specifically, the teachings from Almadi identified by Petitioner refer to process data, which is data retrieved from the remote subsystems/field devices. Thus, we understand that Almadi’s teaching—of using an Ethernet switch to transmit “process data”—describes transmitting data from the remote subsystems/field devices. See Ex. 1005, 3:13–17, cited in Pet. 15. But claim 1 and particularly element [1.4], recites “sending, with the server, the target value to the network address [which identifies a controller of the fluid-handling device13] via the network,” which is different than sending process data from the field devices to the remote host or database server for storage.” slip op. at 19
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,175,680 - Tanklogix, LLC v. SiteproInstitution deniedPTAB · Oct 10, 2025 · IPR2025-00650 · APJ Sheila F Mcshane · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 18–32 and 34 were unpatentable over Kahn or Kahn and Gutierrez.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2024). Upon consideration of the Petition, the Preliminary Response, and the evidence of record, we determine that Petitioner has not established a reasonable likelihood of prevailing with respect to the unpatentability of at least one claim of the ’871 patent. Accordingly, for the reasons that follow, we decline to institute an inter partes review of claims 18–32 and 34 of the ’871 patent.” slip op. at 2
- Skill levelSkill level patent owner adoptedDecided for patent owner
“The respective proposed levels of qualifications for a person of ordinary skill in the art are similar, with Patent Owner proposing two years of experience compared to Petitioner proposing significant experience with remotely controlling fluid-handling devices, like SCADA systems. Patent Owner also proposes more extensive experience in lieu of educational experience. While we find Petitioner’s proposed qualifications to be acceptable, we adopt Patent Owner’s proposed qualifications for the purposes of this Decision because they offer a wider range of qualifications that nonetheless comport with the level of skill necessary to understand and implement the teachings of the ’871 patent and the asserted prior art. Our analysis and findings herein, however, do not turn on any differences in the qualifications adopted.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We determine that we need not expressly construe any claim terms to resolve the parties’ disputes on the current record. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 10
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“actuators and the remote control of fluid handling devices, including the receipt with the user-interface module of “a user command to actuate an actuator via a presented control interface” (limitation [18.7]) and “account authorized to send commands to remotely control fluid handling devices” (limitation [18.11]). We agree with Patent Owner that the Petition fails to demonstrate that Kahn discloses or teaches these limitations because the evidence does not provide support that there is remote control of fluid handling devices or the use of a user command on a control interface to send a command to a fluid handling device, for instance. Kahn is directed to providing access to fluid sensing data and analyzing and providing visual information on that data, but we do not discern that it teaches or discloses the capability to remotely control fluid handling devices. See, e.g., Ex. 1005, code (54), 1:27–36, 2:50–3:2. More specifically, the Kahn disclosures that Petitioner repeatedly relies upon for allegedly teaching this control are deficient. See Ex. 1005, 10:62–67, 14:35– 15:2, 15:62–16:32; see also Pet. 12–14, 16–18. Kahn discloses that “the communication unit 112B can include on-site alerts such as optical (indicator lights), audible alerts (e.g., alarm sounds), tactile (e.g., vibration of the unit) or can be interfaced to an appropriate control valve for simply shutting off the supply of fluid upon the detection of emergency events, for instance.” Ex. 1005, 10:62–67. Communication unit 112B is part of the local “sensor unit,” wherein the detection conditions determined by the sensor are communicated to remote devices by communication unit 112B. See id. at 3:31–33, 5:62–6:2, 6:27–35, 7:33–37, 13:7–12, Figs. 1A–1C. Kahn discloses that the sensor units, which include communication units 112B, can be located near shut-off valves and can communicate with distant locations. See id. at 11:1–13. There are no disclosures, however, in the above passages that there is remote control of fluid handling devices, that there is a user command on a control interface that actuates an actuator, or that there is a command sent to the facility actuators via a network connection, as required in limitations [18.5]–[18.7] and [18.9]–[18.12], respectively. Rather, the disclosure indicates that the communication unit 112B includes on-site alerts and that the local (non-remote) communication unit 112B can be interfaced with the control valve.” slip op. at 18
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,488,871 - PTAB · Oct 8, 2025 · IPR2025-00525 · APJ Scott C Moore · IPR · Institution
The Board instituted review of claim 21 on all asserted grounds after finding a reasonable likelihood it is obvious over Beard.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). If we institute an inter partes review, the trial must encompass all claims and grounds identified in the Petition. 37 C.F.R. § 42.108(a) (“When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.”). For the reasons set forth below, we conclude that there is a reasonable likelihood that Petitioner will prevail in establishing the unpatentability of claim 21, the sole challenged claim. We, therefore, institute inter partes review of claim 21 on the grounds asserted in the Petition. B.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“[E]ither (1) a Bachelor of Science in Mechanical Engineering, Electrical Engineering, Aerospace engineering, or an equivalent field, as well as at least 2 years of academic or industry experience in the aerospace, avionics, telecommunications, or electronic device manufacturing industry, or (2) at least four years of industry experience in any of the above industries. Pet. 21 (citing Ex. 1003 ¶ 47). Patent Owner does not presently dispute Petitioner’s proposed formulation. See generally Prelim. Resp. For 3 U.S. Patent App. Pub. No. US 2016/0253907 A1, published Sept. 1, 2016 (Ex. 1010). 4 PCT Pub. No. WO 2016/078093 A1, published May 26, 2016 (Ex. 1011). 5 PCT Pub. No. WO 2016/154949 A1, published Oct. 6, 2016 (Ex. 1012). 6 U.S. Pat. App. Pub. No. US 2016/0127890 A1, published May 5, 2016 (Ex. 1013). 7 PCT Pub. No. WO 2015/043123 A1, published Apr. 2, 2015 (Ex. 1014). purposes of this Decision, we adopt and apply Petitioner’s formulation regarding the level of ordinary skill in the art because it is (1) consistent with the ’959 Patent and the asserted prior art; and (2) it is supported by the testimony of Dr. Chowdhary. B.” slip op. at 5
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“But before describing the embodiments cited by Patent Owner, the Specification plainly states: “Any terms not expressly defined herein have their conventional meaning as commonly understood by those having skill in the relevant art(s).” Ex. 1001, 4:64–67. Thus, the Specification itself cautions against construing the claim terms such as “secure identifier” as limited to the scope of the disclosed embodiments. Here, Patent Owner has not cited any express definition of “secure identifier,” or identified any explicit disclaimer of claim scope that might justify narrowing the scope of this claim term to specific embodiments disclosed in the Specification. In the absence of such a definition or disclaimer, we are not persuaded that the scope of the claim term “secure identifier” should be limited to specific aspects of the preferred embodiments cited by Patent Owner. See Prelim. Resp. 7–14. On this record, and at this stage of the proceeding, we decline to adopt Patent Owner’s proposed construction and preliminarily construe “secure identifier” as “a credential that can be used to securely verify the identity of a device, such as an airborne object or ground-based transmitter.”8” slip op. at 10
- Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateNot entitled to earlier dateDecided for petitioner
“’071 Application lack adequate written description support for the “secure identifier” claim limitation. For a patent claim to be entitled to the priority date of an earlier-filed application, the earlier application must provide complete written description support for the claim as required by 35 U.S.C. § 112(a). L.A. Biomedical Rsch. Inst. at Harbor-UCLA Med. Ctr. v. Eli Lilly & Co., 849 F.3d 1049, 1057 (Fed. Cir. 2017) (“L.A. Biomed”). To satisfy this requirement, the written description must “reasonably convey” to a person of ordinary skill in the art that the inventor had possession on the claimed priority date of each limitation of the later-claimed subject matter. L.A. Biomed, 849 F.3d at 1057. It is not enough that an earlier application’s disclosure “renders the later-claimed invention obvious;” as “the disclosure must describe the claimed invention with all its limitations.” L.A. Biomed, 849 F.3d at 1057. On this record, we agree with Petitioner that the ’153 Provisional and ’071 Application lack adequate written description support for the “secure identifier” limitation of claim 21. We have preliminarily construed “secure identifier” as “a credential that can be used to securely verify the identity of a device, such as an airborne object or ground-based transmitter.” See supra § II.B. As discussed above, the Specification of the ’959 Patent does not use the term “secure identifier,” but the Specification contains extensive discussion of the need for an identification credential that is secure (e.g., difficult for a bad actor to clone or impersonate). See, e.g., Ex. 1001, 1:56– 65 (discussing the need for a system that is difficult to “clone”), 10:20–49 (discussing the need “trust” between a drone and ground-based equipment, and the need for a way to verifying the drone’s credentials), 11:5–12:62 (disclosing the use of encryption and a rotating SSID to generate a secure identifier for a drone). None of the portions of the Specification cited above is present in the ’153 Provisional or the ’071 Application. See generally Ex. 1006, 1007. The ’153 Provisional and ’071 Application discuss the need for identifiers for low-altitude aircraft (see, e.g., Ex. 1006, 2; Ex. 1007, 9), but there is no discussion of any need for an identification credential to be secure or resistant to cloning or impersonation. See generally Ex. 1006, 1007. The ’153 Provisional and ’071 Application do not disclose the use of encryption, SSIDs (much less rotating SSIDs), or any other technologies for the purpose of verifying the authenticity of an identification credential. See generally id. Based on our review of the ’153 Provisional and ’071 Application, we preliminarily conclude that neither of these applications would have reasonably conveyed to a person of ordinary skill in the art that the inventor then had possession of the concept of the “secure identifier” that was later claimed in the ’959 Patent.” slip op. at 12
Claim construction§ 103 obviousness§ 112 disclosurecites Phillips · GrahamPatents in suitUS 10,713,959
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.