• Aroma360, LLC v. Air Esscentials, Inc.Some claims unpatentable
  PTAB · Oct 6, 2026 · IPR2025-00707 · APJ Eric C Jeschke · IPR · Final written decision

  Claim 5 is unpatentable over Gao-2 and over Gao-2 with Goubet; claims 1, 3, 4, and 6–8 were not shown unpatentable on any ground, and substitute claim 17 was denied.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “As noted in the Decision on Institution, Petitioner’s proposed definition appears generally consistent with the record, including the prior art. See Dec. Inst. 8 (citing In re GPAC Inc., 57 F.3d at 1579). We remove the phrase “at least” in both listed options, however, as that phrase adds ambiguity. Further, Patent Owner has not argued at trial that Petitioner’s proposal for the level of ordinary skill leads to an improper understanding of how a skilled artisan would have understood either the challenged patent or the prior art. In the analysis below, we continue to apply the level of ordinary skill in the art adopted in the Decision on Institution, as proposed by Petitioner.” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Neither Petitioner nor Patent Owner propose explicit constructions for any claim terms. Pet. 16–17; PO Resp. 5–6. Based on the complete record, we need not construe explicitly any claim terms because doing so would not change the outcome of the analysis below. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 10

  • Expert testimonyPetitioner expert creditedDecided for patent owner

    “As an initial matter, the record here does not support any sound basis to disregard the entirety of Dr. Micklow’s Declaration for allegedly not reviewing the parties’ claim constructions. See Pet. Reply 2–3 (citing Ex. 1046, 115:15–18). Contrary to Petitioner’s argument, in the cited 11 This refers to the recitation in clauses 1F and 5F that the “diffusion assembly is disposed between said upper chamber and said lower chamber.” discussion, Dr. Micklow does not indicate that he applied an incorrect understanding of a claim term. Cf. Cordis Corp. v. Bos. Sci. Corp., 658 F.3d 1347, 1357–58 (Fed. Cir. 2011) (disregarding testimony “based on an incorrect understanding of the claim construction”), cited at Pet. Reply 1; see also Pet. Reply 3 (arguing that “Dr. Micklow’s opinion that the prior art does not render the claims obvious is premised on an interpretation of certain claim limitations that are inconsistent with both parties’ constructions” (emphasis added)). Instead, we read Dr. Micklow’s testimony as clarifying that he was not involved in claim construction at all and that, as stated, he “made [his] opinions based on what [he] read in the patents.” Ex. 1046, 112:11–12; see also id. at 115:15–18 (“I don’t know if I would even apply claim construction. I applied engineering principles to a document that had been published with the patent office.”).” slip op. at 12

  • BurdenNot shown unpatentable

    “referring to the same direction as the separation of the “upper chamber” and “lower chamber” (vertically in both Figure 6 of the challenged patent and Figure 1 of Goubet), we turn back now to Petitioner’s discussion of clause 1F, which includes the limitation at issue. There, Petitioner does not discuss why the “diffusion assembly” is allegedly “disposed between” the “upper chamber” and “lower chamber,” but instead, Petitioner discusses why a component of the “diffusion assembly”—the “atomizer assembly”—is allegedly “disposed between” the “upper chamber” and “lower chamber”: Pet. 39. In the end, we need not assess whether the “atomizer assembly” identified by Petitioner is “disposed between” the “upper chamber” and “lower chamber” under the proper construction of that term (which, again, we need not and do not determine here) because the “disposed between” limitation does not involve the “atomizer assembly.” Instead, we find that, by failing to address why the identified “diffusion assembly” is “disposed between” the identified “upper chamber” and “lower chamber,” Petitioner has failed to provide persuasive evidence that Goubet discloses or suggests the “disposed between” limitation. Pet. 38–39 (discussing the claim language “said diffusion assembly is disposed between said upper chamber and said lower chamber” but only discussing the location of the “atomizer assembly”); see 35 U.S.C. § 316(e) (“In an inter partes review . . . , the petitioner shall have the burden of proving a proposition of unpatentability by a preponderance of the evidence.”). For the reasons above, we find, based on the complete record, that Petitioner has not shown by a preponderance of the evidence that Goubet discloses or suggests the “disposed between” limitation.” slip op. at 22

  Patent outcomesUS 10,092,918 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR
  Patents in suitUS 10,092,918
• Imperative Care, Inc. v. Inari Medical, Inc.All claims unpatentable
  PTAB · Oct 6, 2026 · IPR2025-00728 · APJ Timothy G Majors · IPR · Final written decision

  Claims 1–7, 9, 10, 15–18, and 20–24 are unpatentable as obvious over Schaffer with Hartley or Eller; claims 1–3, 5, 6, 9, 15–18, and 21–24 are also obvious over Hartley and Eller.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for patent owner

    “Petitioner’s proposed POSA definition lacks specificity. That definition, if interpreted generically, could mean that a person may qualify as a POSA if they had, for example, a B.S. in mechanical engineering and only two years of experience designing any type of product in any field. That is too broad. We find that a POSA would have had the agreed-upon educational credentials—an undergraduate degree in mechanical engineering or a related engineering discipline. Ex. 1003 ¶ 35; Ex. 2033 ¶ 61. We find that a POSA would also have had 2–4 years of design or engineering experience related to products in the field of the invention, which involves endovascular devices and the surgical procedures that use such devices. Ex. 1001, 1:16–54 (background of the invention). Such devices include, but are not limited to, hemostasis valves and catheters for testimony of the parties’ experts, the POSA need not have had first-hand experience designing hemostasis valves. See, e.g., Ex. 1037 (Zalesky Tr.), 72:11–73:7 (testifying direct experience “designing” hemostasis valves or aspiration catheters is not necessary, but “general experience with vascular devices and procedures” is required). Further, as Dr. Zalesky testified, the POSA’s experience related to developing such devices “could be as simple as bench testing and looking at clinical data.” Id. at 74:5–75:1. Lastly, a POSA would have understood such devices’ design requirements as determined by the needs of the physician, patient, and procedure, which understanding may be informed by work experience or study. Ex. 2030, 24:5–21.” slip op. at 12

  • Expert testimonyPetitioner expert creditedPatent owner expert creditedMixed

    “above (supra Section III.C), a filament requires flexibility, Petitioner has not demonstrated that Schaffer describes that feature in its valves. Instead, Patent Owner persuades us that Schaffer describes “rigid U-shaped actuating members—not a ‘filament.’” PO Resp. 23–24.13 We find Dr. Zalesky’s interpretation of Schaffer more credible than Mr. Thornton’s on the question of whether a POSA would have regarded Schaffer’s actuating members as being substantially rigid structures. Ex. 2033 ¶¶ 91–100 (testifying, inter alia, that a POSA would have understood from Schaffer’s disclosure about making the actuator and actuating members from machining pre-existing amounts of metals and/or plastics, and further explaining that flexible parts would deform and be difficult to machine through conventional techniques); Ex. 1005 ¶¶ 81–82. Mr. Thornton testifies that Schaffer’s disclosed manufacturing techniques for the actuator/actuating members are only examples and “a person of ordinary skill in the art could have simply purchased pre-made [and flexible] flat wire or plastic tapes or ribbons.” Ex. 1003 ¶ 79. Such testimony invokes, at best, obviousness-based reasoning. This does not establish that Schaffer alone describes a filament sufficient to anticipate the claims. Trintec Indus., Inc. v. Top-U.S.A. Corp., 295 F.3d 1292, 1296 (Fed.” slip op. at 28

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed patent owner constructionDecided for patent owner

    “Patent Owner cites intrinsic evidence in support of its interpretation, which include claim 1’s recitation of an “active tensioning mechanism” comprising the filament and the Specification’s description of a filament that can be both “loosened” and “tightened.” PO Resp. 14–17 (citing, e.g., Ex. 1001, 9:36–37, 9:53–56 (teaching “the filament 150 is tightened” when the actuator buttons are released and “the filament 150 is loosened” when the buttons are pressed to open the valve)); see also Ex. 2025, 1288 (defining “tension” as to “tighten to a desired or appropriate degree”). These descriptions from the patent are more consistent with the view that the filament is characteristically flexible, not rigid. 10 We reached the same conclusion, based on substantially the same records, in the Institution Decision and the Final Written Decisions in the 1157, 156, and 289 IPRs. Inst. Dec. 14–18; Ex. 1042, 14–24; Ex. 1048, 16–23; Ex. 1049, 14–17 (noting the parties’ agreement at oral hearing that there was no additional argument or evidence about whether a filament requires flexibility that was not already addressed in related matters). After we construed the “filament” term to require flexibility at institution, Petitioner provided no further argument or evidence on this issue in its authorized trial briefing or at oral hearing. See generally Pet. Reply. embodiments (where the filament forms one or more loops like depicted and described in Figures 6–7) require a flexible structure. See, e.g., Ex. 2032, 15–16 (explaining that the device would not work to constrict the tubular sidewall and lumen (analogous to the elongate member defining a lumen of the claims here) if the filament forming the loop(s) was inflexible); Ex. 1001, Figs. 6–7 (filament 150, with sub-filaments 150-A and 150-B). Although flexibility of the filament in the patent’s “bight” embodiments (e.g., as shown in Figures 8 and 9) is less clear, there is a dearth of evidence from Petitioner—either intrinsic or extrinsic to the patent—showing why a POSA would have understood the bights as embracing rigid structures. See Ex. 1001, Figs. 8–9. Moreover, as admitted by Petitioner’s expert, that a filament may be made from various materials described in the patent (e.g., synthetics or metals) does not, absent more information, lead to a conclusion that a filament is “rigid.” Ex. 2030, 125:2–126:4 (testifying “the relative stiffness or rigidity is not clear from those . . . materials without knowing much more information”).” slip op. at 16

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “We find that Petitioner has not shown, by a preponderance of the evidence, that Schaffer anticipates claim 1 or any of the other challenged claims, each of which requires at least one “filament.” We are unpersuaded above (supra Section III.C), a filament requires flexibility, Petitioner has not demonstrated that Schaffer describes that feature in its valves. Instead, Patent Owner persuades us that Schaffer describes “rigid U-shaped actuating members—not a ‘filament.’” PO Resp. 23–24.13 We find Dr. Zalesky’s interpretation of Schaffer more credible than Mr. Thornton’s on the question of whether a POSA would have regarded Schaffer’s actuating members as being substantially rigid structures. Ex. 2033 ¶¶ 91–100 (testifying, inter alia, that a POSA would have understood from Schaffer’s disclosure about making the actuator and actuating members from machining pre-existing amounts of metals and/or plastics, and further explaining that flexible parts would deform and be difficult to machine through conventional techniques); Ex. 1005 ¶¶ 81–82. Mr. Thornton testifies that Schaffer’s disclosed manufacturing techniques for the actuator/actuating members are only examples and “a person of ordinary skill in the art could have simply purchased pre-made [and flexible] flat wire or plastic tapes or ribbons.” Ex. 1003 ¶ 79. Such testimony invokes, at best, obviousness-based reasoning. This does not establish that Schaffer alone describes a filament sufficient to anticipate the claims. Trintec Indus., Inc. v. Top-U.S.A. Corp., 295 F.3d 1292, 1296 (Fed.” slip op. at 27

  Patent outcomesUS 11,844,921 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,844,921
• Aroma360, LLC v. Air Esscentials, Inc.All claims unpatentable
  PTAB · Oct 6, 2026 · IPR2025-00706 · APJ Eric C Jeschke · IPR · Final written decision

  Claims 1, 4, and 7–10 are unpatentable as obvious over Goubet and anticipated by Gao; proposed substitute claims 20 and 21 are denied as indefinite and lacking written-description support.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In the Response, Patent Owner states that it “does not dispute” the definition of one of ordinary skill in the art proposed by Petitioner, but Patent Owner “reserves the right to address [the definition] should new issues materialize.” PO Resp. 6. Patent Owner did not address this issue in the Sur-reply. As noted in the Decision on Institution, Petitioner’s proposed definition appears generally consistent with the record, including the prior art. See Dec. Inst. 8 (citing In re GPAC Inc., 57 F.3d at 1579). We remove the phrase “at least” in both listed options, however, as that phrase adds ambiguity. Further, Patent Owner has not argued at trial that Petitioner’s proposal for the level of ordinary skill leads to an improper understanding of how a skilled artisan would have understood either the challenged patent or the prior art. In the analysis below, we continue to apply the level of ordinary skill in the art adopted in the Decision on Institution, as proposed by Petitioner.” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionOther

    “Network LLC, 929 F.3d 1350, 1357 (Fed. Cir. 2019). At first glance, the language of the limitation at issue—which, again, recites “the compressed air and the operative fluid mix together in said mixing chamber to form the fluid dispersion”—would seem to require the “fluid dispersion” (under the stipulated construction) to be fully formed in the “mixing chamber.” In other words, the language of the limitation alone would seem to support Patent Owner’s proposed construction for the “form the fluid dispersion” limitation. But the claim construction analysis does not end with consideration of the claim language alone. Next, we turn to the Specification. The Federal Circuit has said that the specification “is the single best guide to the meaning of a disputed term.” Phillips, 415 F.3d at 1315 (quoting Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996)). Here, the discussion in the Specification of precisely the same language as in the limitation at issue strongly supports that “to form a fluid dispersion” in the limitation at issue requires only initial mixing of the compressed air and operative fluid in the mixing chamber, with further “formation” of the ”fluid dispersion” occurring downstream of the mixing chamber: More importantly, the “predetermined amount” of compressed air and the “preselected amount” of the operable fluid are initially mixed together in the mixing chamber 226 to form a fluid dispersion. The diffusion chamber 112" is further structured to facilitate the formation of a plurality of substantially uniform droplets, as defined hereinabove, in the fluid dispersion prior to discharge from the diffusion chamber 112" through discharge port 132. Ex. 1001, 10:62–11:2 (emphasis added) (discussing Figure 6), quoted, in part, at Pet. Reply 6–710; see also Ex. 1001, 5:64–6:4 (same language, except without double primes, in a discussion of Figures 1 and 2). To be sure, certain passages in the Specification could be read to indicate that a “fluid dispersion” must be fully formed in the “mixing chamber.” See, e.g., Ex. 1001, 6:11–12 (“More in particular, the suppression chamber 232 receives the fluid dispersion from the mixing chamber 226.”); see also id. at 7:22–33, 11:39–52 (both implying that a “fluid dispersion” is formed in the mixing chamber). But the passage block quoted directly above (and the similar one bridging columns 5 and 6) more directly addresses the issue at hand—i.e., the scope of “form the fluid dispersion”—by using the same” slip op. at 13

  • Expert testimonyPatent owner expert discountedMixed

    “As an initial matter, the record here does not support any sound basis to disregard the entirety of Dr. Micklow’s Declaration for allegedly not reviewing the parties’ claim constructions. See Pet. Reply 2 (citing Ex. 1046, 115:15–18). Contrary to Petitioner’s argument, in the cited discussion, Dr. Micklow does not indicate that he applied an incorrect understanding of a claim term. Cf. Cordis Corp. v. Bos. Sci. Corp., 658 F.3d 1347, 1357–58 (Fed. Cir. 2011) (disregarding testimony “based on an incorrect understanding of the claim construction”), cited at Pet. Reply 1. Instead, we read Dr. Micklow’s testimony as clarifying that he was not involved in claim construction at all and that, as stated, he “made [his] opinions based on what [he] read in the patents.” Ex. 1046, 112:11–12; see also id. at 115:15–18 (“I don’t know if I would even apply claim construction. I applied engineering principles to a document that had been published with the patent office.”).” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable

    “To satisfy its burden of proving obviousness, a petitioner cannot employ mere conclusory statements. The petitioner must instead articulate specific reasoning, based on evidence of record, to support the legal conclusion of obviousness.” In re Magnum Oil Tools Int’l, Ltd., 829 F.3d 1364, 1380 (Fed. Cir. 2016); TriVascular, Inc. v. Samuels, 812 F.3d 1056, 1066 (Fed. Cir. 2016) (“Although the KSR test is flexible, the Board ‘must still be careful not to allow hindsight reconstruction of references . . . without any explanation as to how or why the references would be combined to produce the claimed invention.’”) (citation omitted). Based on the complete record, we agree with Patent Owner that “Petitioner’s asserted motivation boils down to the conclusory statement that given Goubet and Kaiser, ‘it was well known in the field at the time of the invention that droplets of greater uniformity result in uniform droplet evaporation.’” PO Resp. 31 (quoting Pet. 59). We agree with Patent Owner that Petitioner’s discussion of the alleged reasons to combine (Pet. 59) is insufficient to support the proposed combination here. See Magnum Oil, 829 F.3d at 1380. Specifically, we are not persuaded that Kaiser’s teachings—which relate to combustion (Ex. 1014 at 43)—would have led one of ordinary skill in the art to the proposed modifications, which would allegedly “improve the smoothness (i.e., less harsh) of the aroma generated as the oil droplets evaporate in the surrounding airspace.” See Pet. 59 (emphasis added); White Pet. Decl. ¶ 251 (same); see PO Resp. 32 (“Rather, Dr. White merely describes the ability to achieve the effect as in the claimed patent, not why a [person of ordinary skill in the art] would look to the field of electrospray injection and combustion in mesoscale power-generation systems, using high-voltage electric fields to generate charged fuel droplets for controlled combustion in catalytic micro-combustors when considering atomization for scents.”). For these reasons, we determine, in light of the complete record, that Petitioner has not shown by a preponderance of the evidence that one of ordinary skill in the art at the time of the invention would have had reason to combine Goubet and Kaiser, as proposed. slip op. at 32

  Patent outcomesUS 10,583,449 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Nautilus
  Patents in suitUS 10,583,449
• Ajinomoto Co., Inc. v. Abtis Co., Ltd.No claims unpatentable
  PTAB · Aug 3, 2026 · IPR2025-00283 · APJ Lilan Ren · IPR · Final written decision

  The Board cancelled claim 11 and granted substitute claims 14–16, finding Petitioner had not shown those claims unpatentable on any asserted ground.

  RulingsFinal written decision

  • PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend, grantedGranted

    “must determine whether the motion to amend meets the statutory and regulatory requirements set forth in 35 U.S.C. § 316(d) and 37 C.F.R. § 42.121. Lectrosonics, Paper 15 at 4. In that regard, Patent Owner bears the burden of persuasion to show that: (1) the amendment proposes a reasonable number of substitute claims; (2) the amendment responds to a ground of unpatentability involved in the trial; (3) the amendment does not seek to enlarge the scope of the claims of the patent or introduce new subject matter;” slip op. at 9

  • ExcludeMotion to exclude, deniedDenied

    “In this case, Patent Owner’s expert “Dr. Zhou signed the second declaration, stood behind its contents, and was available for cross-examination.” Paper 35, 4. Petitioner does not dispute this statement. Paper 39, 1. Petitioner does not identify any specific undue prejudice caused by Exhibit 2008. For example, Petitioner argues that “the failure to impress upon a witness that a statement is under oath goes to the heart of its reliability as evidence” and that “as the Board has recognized, hearsay is inherently unreliable” without specifying what statement in Exhibit 2008 lacks reliability. Paper 39, 4. Because Petitioner does not provide specific evidence of undue prejudice, we find Petitioner has suffered no such undue prejudice in this case. See Liquidia, 2021 WL 4860773 at *25. We therefore deny Petitioner’s Motion to Exclude on the basis of lack of authenticity. With regard to the assertion that Exhibit 2008 is hearsay, Petitioner objects to the exhibit because the testimony is based “on other informal and unpublished documents that are hearsay under FRE 802.” Paper 29, 1. Petitioner does not specify what such “informal and unpublished documents” are. See id. Federal Rule of Evidence 703 expressly states, “[a]n expert may base an opinion on fact or data in the case that the expert has been made aware of or personally observed.” The facts or data “need not be deny Petitioner’s Motion to Exclude on the basis of hearsay.” slip op. at 50

  • Disclosure Requirements (§112) › Written description (Ariad)Written description adequateNot shown unpatentable

    “Petitioner’s argument is unpersuasive. Paragraph 59 of the ’503 application describes formula 8-1 but does not support Petitioner’s argument that other unknown formulas may be included in the recited modified heavy chains. Ex. 2003 ¶ 59. Petitioner’s hypothesis that the recited heavy chains may (or may not) encompass unknown formulas is also inapposite to the written description inquiry before us — that is, whether the inventor was in possession of the subject matter recited in claims 14–16 based on the disclosure including formulas 8-1, 8-2, and 8-3. See PowerOasis, 522 F.3d at 1306.” slip op. at 14

  • Disclosure Requirements (§112) › Enablement (Wands, Amgen full scope)EnabledNot shown unpatentable

    “These arguments in the Sur-Reply are unpersuasive to show a lack of enablement first and foremost because the arguments do not specifically provide evidence showing that any purported experimentation is undue. See Sur-Reply 2–8 (asserting, but without providing evidence under any specific Wands factors, that the examples and guidance in the specification do not extend to the broad scope of all antibodies); see Wands, 858 F.2d at 737. We again emphasize that the analysis of undue experimentation does not necessarily require every Wands factor to be explicitly addressed but the analysis must be based on “weighing many factual considerations” depending on the nature of the invention and underlying art. Cephalon, Inc. v. Watson Pharms., Inc., 707 F.3d 1330, 1336 (Fed. Cir. 2013). The assertion that the claim scope is broad alone does not suffice to show a lack of enablement based on the record before us. Moreover, as we note supra, Petitioner’s claim scope argument is based on the false premise that the scope of claims 14–16 is as broad as the claim term “antibody” without taking into account all other claim elements. For example, Petitioner does not disagree with Patent Owner’s statement that “[t]he ’675 Patent’s specification discloses the structural modification site, the chemistry used to modify that residue, and working examples demonstrating the modification” (Reply 2), but asserts only that “[t]he disclosure of SSFI that only binds to IgG1 Fc domains (SEQ ID NO:1) is . . . . inconsistent with the expansive scope of the claims.” Sur-Reply 5. Petitioner’s argument that the claims encompass proteins that lack a lysine reside at a 248 position improperly excludes from the claim language the “lysine residue at 248 position . . . [as] determined by the EU numbering system” that claims 14–16 require. As Dr. Zhou testifies, “each proposed lysine residue at position 248 (EU numbering) is covalently modified with a specific attachment with a terminal bio-orthogonal click-chemistry functional group. The specification describes targeted transfer of a chemical functional group to lysine 248” and when claims 14–16 are considered in their entirety, which includes all claim elements, “[a] POSA would understand the claim itself to limit the modified antibodies to those with lysine at position 248.” Ex. 2004 ¶ 48; Ex. 2008 ¶ 47. We also note that Patent Owner states “a POSA would understand that the phrase ‘one or more modified heavy chain’ encompasses antibodies within typical DAR distributions (i.e., fractional numbers) rather than requiring a distinct process for producing antibodies bearing modified heavy chains in exact integers.” Reply 2–3. Moreover, Patent Owner states that PepTalk Presentation demonstrates that “a POSA would understand antibody conjugation products to exist as mixtures rather than discrete whole number species” because PepTalk Presentation “presents DAR values as non-integer measurements, i.e. DARs of 1.8 and 1.9 reflecting such distributions.” Id. at 3 (citing Ex. 1007, 28). According to Patent Owner, “preparations having an average DAR of approximately 1.8 (commonly referred to in practice as ‘DAR2’) may reflect typical reaction distributions in which some antibodies contain two modified heavy chains while others contain fewer.” Id. at 3 (citing Ex. 2008 ¶ 46). Petitioner does not rebut these statements. See Sur-Reply 2–8. Based on the foregoing, the evidence before us does not show any” slip op. at 27

  Patent outcomesUS 11,896,675 not shown unpatentable
  § 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham · Nautilus
  Patents in suitUS 11,896,675
• Kubota North America Corporation v. Vermeer Manufacturing CompanySome claims unpatentable
  PTAB · Jun 30, 2026 · IPR2025-00169 · APJ Meredith C Petravick · IPR · Final written decision

  Claims 50–54 are unpatentable as obvious over KR996 and JP705; claims 55–63, 68, 69, and 80–85 were not shown unpatentable over KR996, JP705, Bares, and Beltrami.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “(“This language is merely exemplary, using reference numerals to refer to the embodiment’s features and qualifying ‘single weldment’ as referring ‘generally’ to specific embodiments.”). The Iowa District Court reached the same conclusion. See Ex. 1020 at 4 (holding that “‘mainframe’ will be given its plain and ordinary meaning and does not require a single weldment” (emphasis added)), cited at Pet. Init. CC Br. 2; see also 37 C.F.R. § 42.100(b) (“Any prior claim construction determination concerning a term of the claim in a civil action, or a proceeding before the International Trade Commission, that is timely made of record in the inter partes review proceeding will be considered.”).” slip op. at 35

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “probative and cogent evidence in the record” and “may often establish that an invention appearing to have been obvious in light of the prior art was not.” Transocean Offshore Deepwater Drilling, Inc. v. Maersk Drilling USA, Inc., 699 F.3d 1340, 1349 (Fed. Cir. 2012). Thus, notwithstanding what the teachings of the prior art would have suggested to one skilled in the art, secondary considerations (objective evidence of non-obviousness) may lead to a conclusion that the challenged claims would not have been obvious. In re Piasecki, 745 F.2d 1468, 1471–72 (Fed. Cir. 1984). Our obviousness analysis includes consideration and weighing of Patent Owner’s objective indicia of non-obviousness.” slip op. at 57

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableNot shown unpatentableMixed

    “e) Conclusion as to the Independent Claim 50 For the reasons discussed above, the evidence presented by Petitioner” slip op. at 67

  • ExcludeMotion to exclude, grantedGranted in part

    “For these reasons, we are persuaded by Petitioner to exclude, as” slip op. at 19

  Patent outcomesUS 9,321,386 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,321,386
• Kubota North America Corporation v. Vermeer Manufacturing CompanySome claims unpatentable
  PTAB · Jun 30, 2026 · IPR2025-00170 · APJ Eric C Jeschke · IPR · Final written decision

  Claims 1–18 are unpatentable over KR996 and the KR996/Bares combination; Petitioner did not prove claims 19–36 unpatentable over KR996, Bares, and Beltrami.

  RulingsFinal written decision

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed

    “(10) Conclusion as to Objective Indicia We have considered, as a whole, all of Patent Owner’s arguments and admissible evidence concerning secondary considerations. If we were to presume nexus, we give some weight to Patent Owner’s admissible evidence of industry praise and skepticism at the time of invention. d. Conclusion as to Claim 1 For the reasons discussed above (§§ II.F.2.a–b), the evidence” slip op. at 62

  • Obviousness (§103) › Objective indicia / secondary considerationsObjective indicia outweighedDecided for petitioner

    “probative and cogent evidence in the record” and “may often establish that an invention appearing to have been obvious in light of the prior art was not.” Transocean Offshore Deepwater Drilling, Inc. v. Maersk Drilling USA, Inc., 699 F.3d 1340, 1349 (Fed. Cir. 2012). Thus, notwithstanding what the teachings of the prior art would have suggested to one skilled in the art, secondary considerations (objective evidence of non-obviousness) may lead to a conclusion that the challenged claims would not have been obvious. In re Piasecki, 745 F.2d 1468, 1471–72 (Fed. Cir. 1984). Our obviousness” slip op. at 52

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “lexicographical, we agree with the parties that “mainframe” is not limited to a single weldment. Pet. Init. CC Br. 1; PO Init. CC Br. 1–2. Instead, a single-weldment “mainframe” is merely one disclosed embodiment. See Pet. Init. CC Br. 3 (stating that “by including the term ‘generally’ in a statement, the feature (i.e., single weldment) is expressly identified as merely included in some, but not all embodiments”); PO Init. CC Br. 3 (“This language is merely exemplary, using reference numerals to refer to the embodiment’s features and qualifying ‘single weldment’ as referring ‘generally’ to specific embodiments.”). The Iowa District Court reached the same conclusion. See Ex. 1020 at 4 (holding that “‘mainframe’ will be given its plain and ordinary meaning and does not require a single weldment” (emphasis added)), cited at Pet. Init. CC Br. 2; see also 37 C.F.R. § 42.100(b) (“Any prior claim construction determination concerning a term of the claim in a civil action, or a proceeding before the International Trade Commission, that is timely made of record in the inter partes review proceeding will be considered.”). Turning to the prosecution history, neither Petitioner nor Patent Owner has highlighted any specific statements that impact the scope of the term “mainframe.” And from our independent review, we do not discern any such statements. For these reasons, the intrinsic evidence as a whole supports construing “mainframe” as a primary supporting structure.” slip op. at 33

  • ExcludeMotion to exclude, grantedMotion to exclude, deniedMixed

    “2. Analysis “The moving party has the burden of proof to establish that it is entitled to the requested relief.” 37 C.F.R. § 42.20. a. Exhibits 1005, 1006, and 1014 Exhibit 1005 is an English language translation of Korean Patent No. 10-1041996. Exhibit 1006 is an English language translation of Japanese document JP2004-17705A. Exhibit 1014 is an English language translation of Korean Patent No. 10-1023528. A Certification of Translation signed by Takashi Maeshiro of HC Language Solutions, Inc., accompanies each of Exhibits 1005, 1006, and 1014. Ex. 1005 at 28; Ex. 1006 at 16; Ex. 1014 at 16. Each Certification of Translation is worded substantially the same except for the references to the document at issue and the source language being either Korean or Japanese. Exhibit 1005’s Certification of Translation, for example, states: I, Takashi Maeshiro, on behalf of HC Language Solutions, Inc., do solemnly and sincerely declare, to the best of my knowledge and belief, that the attached text represents a translation of Korean Patent No. 10-1041996, that the translation was performed by HC Language Solutions, Inc., and that the translation represents a true, correct, and faithful translation from Korean to English in a form that reflects the intention and meaning of the original text. I hereby declare that all statements made herein of my own knowledge are true and that all statements made on information and belief are believed to be true; and further that these statements were made with the knowledge that willful false statements and the like so made are punishable by fine or imprisonment, or both, under Section 1001 of Title 18 of the United States Code. Ex. 1005 at 28 (emphasis added). Patent Owner argues that the Certifications of Translation do not” slip op. at 18

  Patent outcomesUS 9,975,750 mixed
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 9,975,750
• Imperative Care, Inc. v. Inari Medical, Inc.All claims unpatentable
  PTAB · Jun 9, 2026 · IPR2025-00289 · APJ Timothy G Majors · IPR · Final written decision

  Claims 1–15 are unpatentable: claims 1–15 under Grounds 2 and 3, and claim 10 under Ground 4; Ground 1 did not establish unpatentability.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “We have construed the “filament” term in multiple related proceedings and agreed with Patent Owner that the claimed filament requires flexibility. See Ex. 1050 (Final Written Decision in 156 IPR); IPR2024-01157, Paper 35 (Final Written Decision) at 15–24. Specifically, we determined that the evidence supports Patent Owner’s position that “a POSA would have understood the plain and ordinary meaning of the claimed ‘filament’ as a flexible length of material (e.g., one or more string(s), wire(s), tape(s)).” See, e.g., Ex. 1050, 23. We maintain that construction in this Decision for the reasons given by Patent Owner (see PO Resp. 24–32; PO Sur-reply 6–8), we disagree with Petitioner’s argument to the contrary (Pet. Reply 27–31), and we incorporate our analysis concerning the meaning of the filament term from the related proceedings identified above, which applies equally here.13 Ex. 1050 (Final Written Decision in 156 IPR); IPR2024-01157, Paper 35 (Final Written Decision) at 15–24. The parties agreed at the oral hearing that there is no additional argument or evidence 13 Although the ’005 patent is not directly related to the patents at issue in the 1157 and 156 IPRs, the ’519 Application that the ’005 patent purports to incorporate for providing all relevant disclosures about the filament term is a parent application to the challenged patents in the 1157 and 156 IPRs (see supra n.3). SightSound Techs., LLC v. Apple Inc., 809 F.3d 1307, 1316 (Fed. Cir. 2015) (“Where multiple patents derive from the same parent application and share many common terms, we must interpret the claims consistently across all asserted patents.”) (internal quotation marks omitted). We also construed the filament term consistently in other ongoing proceedings on related patents. See, e.g., Ex. 1045 (Institution Decision in the 728 IPR), 12–18; Ex. 1046 (Institution Decision in the 989 IPR), 13–21. already addressed in those related matters. Tr. 6:13–23, 23:19–26.” slip op. at 16

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art Petitioner contends that the person of ordinary skill in the art (“POSA”) in August 2018 “would have had an undergraduate degree in mechanical engineering or a related engineering discipline and 2–4 years of catheter design experience.” Pet. 17 (citing Ex. 1003 ¶ 35). Although Patent Owner states that it “disagrees” with Petitioner’s POSA definition, Patent Owner nevertheless applies that definition in this case. PO Resp. 32–33; see Tr. 22:23–23:5 (Patent Owner is “not disputing” Petitioner’s definition, asserting the definition “doesn’t make any difference in this case”).” slip op. at 13

  • Expert testimonyPatent owner expert creditedPetitioner expert creditedMixed

    “We credit Dr. Zalesky’s interpretation of Schaffer on whether the POSA would have understood Schaffer as describing rigid actuating members. Dr. Zalesky testifies, for example, that a POSA would have understood from Schaffer’s disclosures about the actuating members being “machined” from metal or plastic, that such actuating members would be rigid. Ex. 2026 ¶ 101 (explaining “machining is a manufacturing process in which the desired part . . . is created using the controlled removal of bulk material” to produce a “rigid material”); Ex. 1005 ¶ 82 (“The actuating member 55 and the actuating button 261 is machined from aluminum” and “[i]n another example, the actuating member 55 and the actuating button 261 are machined from plastic”); Ex. 2026 ¶¶ 102–103 (testifying the disclosed valve assembly technique in Schaffer (Ex. 1005 ¶ 83) also indicates that “rigid” actuating members are used). Mr. Thornton opines (without citation to any persuasive supporting disclosure) that a POSA “would have understood that Schaffer’s U-shaped actuating members would have preferably been formed from a thin, flexible material.” Ex. 1003 ¶ 113. But, at deposition, Mr. Thornton conceded that machined plastics and aluminum, like disclosed in Schaffer, are rigid. Ex. 2005, 168:2–6 (“Q. And you said that plastic that would be machined would be rigid, correct? A. I think that’s a fair statement.”). Although Mr. Thornton opines that Schaffer’s actuating members would “preferably”” slip op. at 29

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableUnpatentableMixed

    “For the reasons above, Petitioner has not established that the claimed “filament” is disclosed in the combination of Garrison and Schaffer and, thus, Petitioner has not shown by a preponderance of the evidence that claim 1 would have been obvious over Garrison and Schaffer. Petitioner’s challenge to independent claim 10 (and the claims that depend from claim 1 and claim 10) fails for similar reasons. Each of the challenged claims requires a “filament” and, given our construction of that term and our findings above that Schaffer does not teach or suggest the claimed filament, Petitioner has not proved by a preponderance of the” slip op. at 31

  Patent outcomesUS 11,554,005 unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,554,005
• Imperative Care, Inc. v. Inari Medical, Inc.Instituted
  PTAB · Dec 11, 2025 · IPR2025-01025 · APJ Timothy G Majors · IPR · Institution

  The Board instituted IPR on all challenged claims and all asserted grounds, finding a reasonable likelihood that claim 1 is unpatentable over Garrison with Laub and/or Aklog.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “Under 35 U.S.C. § 314(a), an inter partes review may not be instituted unless it is determined that there is a reasonable likelihood that the petitioner will prevail with respect to at least one of the claims challenged in the petition. For reasons explained below, we conclude that Petitioner shows a reasonable likelihood that it will prevail with respect to at least one of the ’910 patent’s challenged claims. We institute inter partes review on all challenged claims and on all asserted grounds. See SAS Inst. Inc. v. Iancu, 584 U.S. 357, 362–63 (2018); 37 C.F.R. § 42.108(a) (“When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.”).” slip op. at 2

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “(“POSA”) “would have had an undergraduate degree in mechanical engineering or a related engineering discipline and 2-4 years of catheter design experience and, where necessary, would have consulted with a physician regarding the methods of treatment.” Pet. 18 (citing Ex. 1003 ¶¶ 35–36).” slip op. at 12

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “standard used in a civil action before the courts under 35 U.S.C. § 282(b), including construing claim language in accordance with its ordinary and customary meaning as understood by the POSA, in view of the patent’s specification and considering the patent’s prosecution history. 37 C.F.R. § 42.100(b). We need only construe terms where the parties dispute a term’s meaning and only to the extent needed to resolve the controversy. Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019).” slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted

    “To show unpatentability based on a combination of teachings, “[a]n obviousness determination [also] requires finding both that a skilled artisan would have been motivated to combine the teachings of the prior art references to achieve the claimed invention, and that the skilled artisan would have had a reasonable expectation of success in doing so.” CRFD Rsch., Inc. v. Matal, 876 F.3d 1330, 1340 (Fed. Cir. 2017) (internal quotation marks omitted).” slip op. at 12

  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,974,910
• Imperative Care, Inc. v. Inari Medical, Inc.Instituted
  PTAB · Dec 11, 2025 · IPR2025-01021 · APJ Timothy G Majors · IPR · Institution

  The Board instituted IPR on claims 1–12, 14–31, and 33–38 on all asserted grounds, finding a reasonable likelihood of success on at least claim 1.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “its challenge to the claims under Grounds 1A–4A. We have also considered Patent Owner’s counterarguments, which we find unavailing at this stage for reasons explained below. See infra Section III.E.3. Upon considering the parties’ argument and evidence, we find that Petitioner has established that it is reasonably likely to succeed in showing that at least claim 1 would have been obvious under Grounds 1A–4A. Based on the preliminary record, Petitioner persuades us that a POSA would have had reasons for adding a stopcock (or similar flow-control valve) to Laub’s system between the catheter and the cited clot canister and pressure source, as suggested by Garrison. See, e.g., Ex. 1006 ¶¶ 130–134; Ex. 1012, Fig. 1A; Ex. 1006, Fig. 34. Petitioner persuades us that Laub’s system, modified as proposed, would allow a user to close the valve while a pressure source (e.g., a pump) creates a negative pressure and vacuum between the valve and the pressure source, which vacuum may then be applied to a distal portion of the catheter upon opening the valve to facilitate a rapid aspiration of a portion of a PE into the clot canister. Pet. 38–42; Ex. 1003 ¶¶ 48, 103–114.” slip op. at 30

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “(“POSA”) “would have had an undergraduate degree in mechanical engineering or a related engineering discipline and 2-4 years of catheter design experience and, where necessary, would have consulted with a physician regarding the methods of treatment.” Pet. 13 (citing Ex. 1003 ¶ 35). Patent Owner counters that Petitioner’s proposed definition is “insufficient” but does not, in the Preliminary Response, explain why it is “insufficient” or propose a definition of its own. Prelim. Resp. 20 (citing333 Ex. 2005 ¶ 52).14 Instead, in advancing Patent Owner’s counterarguments, “Patent Owner applies Petitioner’s definition.” Id. For this Decision, we apply Petitioner’s POSA definition, which appears to be reasonable and consistent with the prior art.” slip op. at 12

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “specification and considering the patent’s prosecution history. 37 C.F.R. § 42.100(b). We need only construe terms where the parties dispute a term’s meaning and only to the extent needed to resolve the controversy. Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). Petitioner contends that the term “filament” in, for example, dependent claim 11 means at least “one or more threads, lines, cords, ropes, ribbons, flat wires, sheets, or tapes.” Pet. 15. Patent Owner notes its disagreement with Petitioner’s interpretation of the term “filament” in related proceedings (e.g., IPR2025-00289). Prelim. Resp. 20 n.3. But Patent Owner contends that the claim construction issue in related proceedings “is not germane” to Patent Owner’s arguments in the present case and, thus, the Board need not construe that term (or any other term of the ’333 patent’s challenged claims) at this time. We need not, at this stage, further construe the ’333 patent’s claims to address the issues that are presently in dispute.” slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “pumps, like described in Laub, Aklog, and Garrison would, in the proposed modified systems, generate a vacuum pressure as claimed will be best assessed on a full record at trial. As an initial matter, claim 1 does not recite a “maximum level of aspiration in a rapid fashion.” At most, Patent Owner’s argument (if accepted) may weaken some of Petitioner’s reasoning for modifying the prior art. In any event, we are at this stage unpersuaded that a pump would not, when a fluid control valve is closed, generate a vacuum pressure and operate in the manner claimed. See, e.g., Ex. 1003 ¶¶ 103–105 (testifying that a stopcock and aspiration pump would generate a vacuum and provide for rapid aspiration). Garrison does not disclose that only syringes have such capability, and Garrison teaches, in the same paragraph where the cited alternative aspiration sources may be used in its systems (“active source[s] of aspiration may be an aspiration pump, a regular or locking syringe, a hand-held aspirator, hospital suction, or the like”). Ex. 1006 ¶ 134. Garrison’s disclosure is, thus, not limited to use of syringes or even peristaltic pumps (as allegedly depicted in Figure 34). We also note (as pointed out by Petitioner) that the ’333 patent indicates that both pumps and syringes generate and store negative/vacuum pressure in an aspiration system.18 Ex. 1001, 7:28–41, dependent claim 15 (aspiration source comprises “an electric pump”); Prelim. Reply 5. That a POSA would have understood that both syringes and pumps, like disclosed in Garrison, can generate a vacuum pressure to permit rapid aspiration of clots also finds further evidentiary support in Dr. Turk’s testimony that surgeons have used pumps and syringes for that purpose since the early 2010s. Ex. 1022 ¶ 23. Moreover, although Laub teaches that running a pump continuously at high flow rates can assist with dislodging clots, Petitioner persuades us on the present record that a POSA would see benefit in modifying Laub’s system to also allow for an initial or intermittent rapid burst of vacuum pressure to help remove a clot. Ex. 1003 ¶¶ 106, 109.” slip op. at 33

  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,969,333
• Straumann USA, LLC v. Smart Denture Conversions, LLCInstituted
  PTAB · Dec 10, 2025 · PGR2025-00054 · APJ Ryan H Flax · PGR · Institution

  The Board instituted PGR on claims 1–16 on all four grounds, finding at least one claim more likely than not unpatentable based on obviousness, indefiniteness, or lack of written description.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “institute trial in a post-grant review. We institute a post-grant review only if the information presented in the petition filed under 35 U.S.C. § 321, if unrebutted, shows that it is more likely than not that at least one claim challenged in the petition is unpatentable. 35 U.S.C. § 324. On the existing record, we conclude that Petitioner demonstrates it is more likely than not that Petitioner would prevail in showing that at least one challenged claim of the ’781 patent is unpatentable under a presented ground. See generally Pet. Therefore, we grant institution of post-grant review. Our reasoning is discussed below.” slip op. at 2

  • PTAB / AIA Trials › Real party in interest / privityDecided for petitioner

    “STANDING Petitioner states that it certifies that: (1) the ’781 patent is available for post grant review because its earliest claimed effective filing date is October 9, 2018, and the patent issued less than nine months ago, on December 3, 2024; and (2) Petitioner is not barred or estopped from requesting a post grant review on the grounds in this petition. Pet. 5. This is sufficient. See 35 U.S.C. § 100(note)(A)–(B), § 321; 37 C.F.R. § 42.204(a). Patent Owner does not contest standing. See generally Prelim. Resp. B. REAL PARTIES-IN-INTEREST Petitioner states that “[t]he real parties-in-interest are Petitioner Straumann USA, LLC and its affiliates Institut Straumann AG and JJGC Indústria e Comércio de Materiais Dentários S.A.” Pet. 3. Patent Owner raises no objection and itself identifies “Smart Denture Conversions, LLC is the real party-in-interest.” Paper 4, 2; see generally Prelim. Resp. C.” slip op. at 3

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “At this point, we find little meaningful difference between the two proposed definitions. In fact, neither does Patent Owner’s witness, Mr. Leinsing, who states that his “opinions would not change under either definition.” Ex. 2011 ¶ 42. And, as set forth above, Patent Owner asserts that, for the sake of its present arguments, it matters not which of the two proposed definitions we use for this proceeding. Prelim. Resp. 21. Thus, at this stage, we accept and use Petitioner’s proposed definition of the ordinarily skilled artisan, which, unlike Patent Owner’s, does not implicate reliance on the knowledge of people other than the individual ordinarily skilled artisan. Petitioner’s definition appears to comport with the level of skill in the art reflected in the prior art of record and the ’781 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“[T]he prior art itself [may] reflect[] an appropriate level” of ordinary skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). This issue may be further developed at trial by the parties, if desired. C.” slip op. at 19

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “same claim construction standard that is used to construe patent claims in a civil action in federal district court thus, by default, we give claim terms their ordinary and customary meaning, which is “the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention.” 37 C.F.R. § 42.200(b); Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc). Petitioner indicates that None of the claim terms of claims 1–16 need to be construed to determine the patentability issues presented in this petition. The petition applies the ordinary meaning of the claim language as it would be understood by a POSA after reading the ’781 patent. Ex. 1002, ¶130. Petitioner will propose a construction if Patent Owner argues or the Board determines that one is required for any term. Pet. 31 (citing Ex. 1002). And, Patent Owner presents no express position on claim construction at this point. See generally Prelim. Resp. At this stage of the proceeding, we do not expressly construe any claim terms; however, this position is preliminary and we may change it based on the fully developed record at trial.8 D.” slip op. at 19

  Claim construction§ 103 obviousness§ 112 disclosurecites Graham
  Patents in suitUS 12,156,781

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.