• Uatp IP LLC v. Slick Slide LLCSome claims unpatentable
  PTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision

  Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

    “1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20

  Patent outcomesUS 11,998,854 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
  Patents in suitUS 11,998,854
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision

  Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other

    “Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

    “We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29

  Patent outcomesUS 11,886,774 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,886,774
• Charles River Laboratories, Inc. v. Seikagaku CorporationAll claims unpatentable
  PTAB · Sep 8, 2026 · IPR2025-00440 · APJ Tawen Chang · IPR · Final written decision

  Claim 21 is unpatentable as obvious over Mizumura with either the ’498 PCT or McClymont; the Revised Contingent Motion to Amend proposing claim 22 is denied.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “overlap to a significant degree, i.e., a person with a Ph.D. in a discipline related to biological sciences and having had at least two years of work experience. However, the parties’ proposals differ slightly in the specific subjects in which a POSA would have had a doctoral degree, and whether the person’s work experience must have been directly related to horseshoe crab Factor C. As an initial matter, we find that a rigid requirement as to the subject of a POSA’s doctoral degree (e.g., biochemical engineering, enzymology), or experience working specifically with horseshoe crab proteins, is not consistent with the evidence of record. See, e.g., Ex. 1067, 20:23–21:2 (Dr. Schaefer testifying that the fact the “name of [his] Ph.D. is immunology . . . does not change the fact that the core of [his] thesis training was really in molecular biology”), 22:3–15 (explaining “the fact that the production of proteins recombinantly is mostly species agnostic”); Ex. 1069, 45:20–47:17 (Dr. Morris testifying that whether a person is a POSA depends on the person’s “experience, [ ] publications,” and work done for the Ph.D. rather than the name of the Ph.D. program). We also find that evidence of record supports Petitioner’s assertion that, for purposes of defining a POSA, “[m]ore education could substitute for experience, and vice versa.” See, e.g., Pet. 19; Ex. 1065, 99:14–100:3. with respect to the claims of the ’318 patent would have had a Ph.D. in molecular biology, biochemistry, or a related discipline, and about two years of experience with cloning genes, expressing cloned genes as proteins, and/or characterizing such cloned genes and proteins, with more education being able to substitute for experience, and vice versa. A POSA may also have collaborated with others, including those with specific experience in utilizing or assessing horseshoe crab Factor C for endotoxin detection and quantitation.” slip op. at 13

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “C. Claim Construction The parties agree that “the terms in claim 21 can be afforded their plain and ordinary meaning for purposes of this proceeding” without further construction. Pet. 19–20; PO Resp. 11. Because express claim construction is not needed to resolve the issues in this case, we need not, and do not, construe expressly any claim term for purposes of this Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 14

  • Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateNot entitled to earlier dateDecided for petitioner

    “Carrying Out the Invention section, that “[t]he Factor C of the present invention is a Factor C derived from a horseshoe crab,” and states later in the same section that “[e]xamples of the horseshoe crab include . . . Limulus polyphemus.” Ex. 1006, 40. However, none of the remaining portions of ’767 application cited by Patent Owner relate directly to L. polyphemus; instead, the remaining portions of ’767 application cited by Patent Owner are directed to other species, in particular the Japanese horseshoe crab T. tridentatus. Further, Patent Owner’s witness, Dr. Schaefer, conceded that the ’767 application does not contain Factor C sequence information for L. polyphemus. See, e.g., Ex. 1067, 44:25–45:23. Although “[n]o length requirement exists for a disclosure to adequately describe an invention,” Falko-Gunter, 448 F.3d at 1365–1366, we are persuaded that a POSA would not, based on the totality of the above disclosures, reasonably understand that the inventors were in possession of the claimed HEK-293 recombinant L. polyphemus Factor C protein, in view of the state of the art as of December 10, 2013. In this regard, we note that adequate written description of a biological molecule, such as a HEK293 recombinant L. polyphemus Factor C protein, requires “more than a mere statement that it is part of the invention and reference to a potential method for isolating it”; instead, what is required is “‘a precise definition, such as by structure, formula, chemical name, or physical properties,’ not a mere wish or plan for obtaining the claimed chemical invention.” The Regents of the” slip op. at 21

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “Pfizer, Inc. v. Apotex, Inc., 480 F.3d 1348, 1364 (Fed. Cir. 2007). Neither do we see Petitioner’s arguments regarding the December 10, 2013 priority date to be “mutually opposed” as Dr. Schaefer testified. Ex. 1067, 216:4– 24. Instead, we credit evidence of record, including Dr. Jain’s testimony and the February 22, 2018 Mizumura Declaration, that existence of the full sequence would permit a more complete analysis and that such an analysis would provide a POSA with a reasonable expectation that the claimed L. polyphemus recombinant protein would have a residual activity within the claimed range. See, e.g., Ex. 1029, 2–5; Ex. 1010, 48; Ex. 1065, 117:14– 130:24 (explaining that comparison of partial sequences in the Tokunaga 1991 publication showed “difference around the cleavage site” between T. tridentatus and L. polyphemus but comparison of the full sequence revealed that “the catalytic triad of histidine, serine, aspartate . . . to be more similar between Tachypleus and Limulus”). Patent Owner asserts that “Petitioner’s reliance on a statement made by Dr. Mizumura in a declaration submitted during prosecution of the ’767 Application fails to fill the gap in the analysis” regarding reasonable expectation of success, because the declaration “offers no evidence of the percentage of conserved amino acid substitutions that exist to support the conclusion that a POSA would have expected residual activity to be maintained between Tachypleus tridentatus and Limulus polyphemus” PO Resp. 47. However, as noted above, Dr. Mizumura provides an alignment of Factor C proteins from the two different species of horseshoe crab, determines that the similarity between the amino acid sequence is 99.5%, states that the amino acid residues that can undergo N-type sugar chain that L. polyphemus, like T. tridentatus, would also be less susceptible to inhibition by ions. Ex. 1029, 4–5. For the reasons discussed above, we also disagree with Patent Owner’s assertion that Petitioner’s reasonable expectation of success argument is “nothing more than conclusory assertions with no support.” PO Resp. 46. Rather, we find Petitioner has shown, by a preponderance of the evidence, that a POSA would have had reason to combine the teachings of Mizumura and the ’498 PCT, with a reasonable expectation of success in arriving at the Factor C protein recited in claim 21.” slip op. at 38

  Patent outcomesUS 11,236,318 unpatentable
  Claim construction§ 103 obviousness§ 112 disclosurecites KSR · Graham
  Patents in suitUS 11,236,318
• Embody, Inc. / Zimmer Biomet Holdings, Inc. v. Lifenet HealthSome claims unpatentable
  PTAB · Aug 4, 2026 · IPR2025-00249 · APJ Michael J Fitzpatrick · IPR · Final written decision

  Claims 1 and 4–8 are unpatentable: claims 1 and 4–6 as obvious over Huang2 and Kuo, and claims 7–8 as anticipated by Huang2; claims 2–3 were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for patent owner

    “(“POSITA”) “would be a Ph.D. student with a minimum of two years of experience in their faculty advisor’s laboratory” and would have an understanding of “electrospinning fibers, including for tissue engineering, tissue engineering techniques, and using/performing FFT analysis.” Pet. 20– 21 (citing Ex. 1003 § II.C7). Patent Owner does not dispute Petitioner’s proposal but specifies the set of disciplines within which the Ph.D. would have been earned, namely “bioengineering, chemical engineering, mechanical engineering, or a related engineering discipline.” PO Resp. 6. We adopt and apply Petitioner’s proposal as clarified by Patent Owner regarding the Ph.D. discipline.” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed board ownDecided for patent owner

    “At the outset, we agree with Patent Owner that the Specification purports to define “major peaks” in the following sentence: “The ‘major peaks’ herein refer to peaks higher than the average of the peaks in the result.” Ex. 1001, 13:28–29. We determine that this language satisfies at least two of the criteria set forth in Alnylam. Specifically, the sentence at “refers to” to explain what qualifies as major peaks. That is not the end of the inquiry, however, as we find there is still some ambiguity as to whether the patentee intended to define “major peaks” so as to require so-called “minor peaks” in the claimed invention. See Bell Atlantic, 262 F.3d at 1268 (“[T]he intrinsic evidence must ‘clearly set forth’ or ‘clearly redefine’ a claim term so as to put one reasonably skilled in the art on notice that the patentee intended to so redefine the claim term.”). Importantly, the Specification does not treat the existence of minor peaks as prerequisites for the existence of major peaks. Indeed, the Specification does not discuss “minor peaks” at all. See generally Ex. 1001. Likewise, none of the claims of the ’227 patent, whether challenged or unchallenged, recites “minor peaks” or any additional peaks beyond the disputed “major peaks.” Id. at 23:30–24:42. Nor does the Specification include an example of FFT analysis results in which the average of the peaks therein is calculated and those higher than the average are identified as major peaks.8” slip op. at 9

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundMixed

    “Petitioner has the better position. Huang2 teaches crosslinking and provides a reason for doing so (stability). In particular, Huang2 states: “To better mimic skin ECM, electrospun collagen fibers have been fabricated, however, the rapid degradation and poor mechanical properties determine that either crosslinking or combination with other materials is necessary to obtain a stable scaffold.” Ex. 1005, 1791 (emphasis added). It is true that, in describing work actually carried out, Huang2 states that blending with PCL was performed and does not mention crosslinking. See id. at 1792 (“Nanofibrous matrices of PCL and Collagen at a weight ratio of 3:1 were fabricated using electrospinning as previously described.”). However, the prior art – here, Huang2 – is not limited to that which it describes having created. See In re Mills, 470 F.2d 649, 651 (C.C.P.A. 1972) (“a reference is not limited to the disclosure of specific working examples”); see also In re Lemelson, 397 F.2d 1006, 1009 (CCPA 1968) (“The use of patents as references is not limited to what the patentees describe as their own inventions or to the problems with which they are concerned. They are part of the literature of the art, relevant for all they contain.”); In re Fritch, 972 F.2d 1260, 1264 (Fed. Cir. 1992) (“It is well settled that a prior art reference is relevant for all that it teaches to those of ordinary skill in the art.”). Huang2 teaches two stabilization methods when using collagen in scaffolds. Huang2 states that one or the other “is necessary to obtain a stable scaffold” (when using collagen), but it does not preclude or teach away from using Patent Owner-cited testimony of Dr. Mikos is not as definitive as Patent Owner suggests; Dr. Mikos’s testimony is that a person of ordinary skill in the art “typically would not have done both.” Ex. 2015 ¶64 (emphasis added). The bottom line is that Huang2 teaches the person of ordinary skill in the art two ways to stabilize scaffolds/matrices comprised of collagen, provides a reason for doing so (stability), and does not teach away from using both. We are persuaded that a “scaffold comprising crosslinked fibers comprising collagen” would have been obvious in view of the cited teachings of Huang2.” slip op. at 33

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “We are not persuaded by Appellant’s citations to either reference. As discussed above, Petitioner’s Ground 1 is premised on a person of ordinary skill in the art altering the native flat sheet structure of Huang2 by rolling it into a jelly-roll structure as taught by Kuo. See Pet. 41 (Beginning its claim 2 arguments with the following: “Claim 1 is obvious for the reasons expressed above in § X.A., supra, which are incorporated herein.”); see also Pet. Reply 17 (“[B]ased on the explicit teaching of Kuo, a POSA would have been motivated to take the electrospun flat scaffold made by the techniques of Huang2, seed it with the desired cells, and roll it to treat a tendon and ligament.” (emphasis added)). Indeed, the paragraphs of Kuo that Petitioner cites for disclosing “scaffold sheets,” explicitly describe rolling them into jelly-roll like structures. See Ex. 1018 ¶7 (stating that “the sheet is spirally contacting a scaffold sheet of fibrous material with a cell; and rolling the scaffold sheet in a jelly-roll like manner to form a spirally wound tissue construct”), ¶22 (describing a method comprising “forming a tissue construct by contacting a scaffold sheet of fibrous material with a cell; and rolling the scaffold sheet in a jelly-roll like manner to form a spirally wound tissue construct” and implanting it in a patient). Petitioner fails to argue that that “one or more elongated sheets” recited in claim 2 would encompass the rolled structure of its proposed modification. Nor does Petitioner articulate a claim construction argument that could support such an argument. Petitioner has failed to prove, by a preponderance of the evidence, that claim 2 would have been obvious over Huang2 and Kuo.” slip op. at 42

  Patent outcomesUS 11,318,227 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · Markman · KSR
  Patents in suitUS 11,318,227
• Embody, Inc. / Zimmer Biomet Holdings, Inc. v. Lifenet HealthAll claims unpatentable
  PTAB · Aug 4, 2026 · IPR2025-00248 · APJ Michael J Fitzpatrick · IPR · Final written decision

  Claims 1–3 and 5–12 are unpatentable as anticipated by Huang2; claim 4 is unpatentable as obvious over Huang2 and Kumbar. Lee grounds failed.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “understanding of “electrospinning fibers, including for tissue engineering, tissue engineering techniques, and using/performing FFT analysis.” Pet. 18– 19 (citing Ex. 1003 § II.C5). Patent Owner does not dispute Petitioner’s proposal but specifies the set of disciplines within which the Ph.D. would have been earned, namely “bioengineering, chemical engineering, mechanical engineering, or a related engineering discipline.” PO Resp. 5–6. We adopt and apply Petitioner’s proposal as clarified by Patent Owner regarding the Ph.D. discipline.” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed board ownDecided for patent owner

    “A patentee “may choose to be his own lexicographer and use terms in a manner other than their ordinary meaning, as long as the special definition of the term is clearly stated in the patent specification or file history.” Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996) (citing Hoechst Celanese Corp. v. BP Chemicals Ltd., 78 F.3d 1575, 1578 (Fed. Cir. 1996)); see Markman v. Westview Instruments, Inc., 52 F.3d 967, 980 (Fed. Cir. 1995) (en banc) (“[A]ny special definition given to a word must be clearly defined in the specification.”), aff'd, 517 U.S. 370 (1996); CCS Fitness, Inc. v. Brunswick Corp., 288 F.3d 1359, 1366 (Fed. Cir. 2002). “[T]he intrinsic evidence must ‘clearly set forth’ or ‘clearly redefine’ a claim term so as to put one reasonably skilled in the art on notice that the patentee intended to so redefine the claim term.” Bell Atlantic Network Services, Inc. v. Covad Communications Group, Inc., 262 F.3d 1258, 1268 (Fed. Cir. 2001). Among the criteria to consider in whether the patentee acted as a lexicographer to define a claim term include (a) whether the patent specification included the statement in question under a section for marks, (c) whether the sentence uses the term “refer to,” which generally “conveys an intent for [that sentence] to be definitional,” and (d) whether there are other non-limiting terms (e.g., “for example,” or “include”) that contradict a definitional intent. Alnylam Pharms., Inc. v. Moderna, Inc., 138 F.4th 1326, 1333 (Fed. Cir. 2025) (alteration in original). At the outset, we agree with Patent Owner that the Specification purports to define “major peaks” in the following sentence: “The ‘major peaks’ herein refer to peaks higher than the average of the peaks in the result.” Ex. 1001, 13:6–7. We determine that this language satisfies at least two of the criteria set forth in Alnylam. Specifically, the sentence at issue sets out “major peaks” in quotation marks, and then uses the term “refers to” to explain what qualifies as major peaks. That is not the end of the inquiry, however, as we find there is still some ambiguity as to whether the patentee intended to define “major peaks” so as to require so-called “minor peaks” in the claimed invention. See Bell Atlantic, 262 F.3d at 1268 (“[T]he intrinsic evidence must ‘clearly set forth’ or ‘clearly redefine’ a claim term so as to put one reasonably skilled in the art on notice that the patentee intended to so redefine the claim term.”).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “As discussed above, we agree with Patent Owner that the sentence it cites from the Specification of the ’223 patent bears sufficient hallmarks of lexicography. However, the Specification nonetheless lacks any indication that so-called “minor peaks” are a necessary component of the claimed invention. “Although it is firmly settled that an applicant may act as a 9 Figure 8B does not contain “major peaks” despite clearly depicting two “peaks higher than the average of the [three or possibly four] peaks in the result” because none of the peaks is a reflection of fiber alignment. 10 After presenting claim construction arguments based on Ayres 2008, Patent Owner confusingly states: “Finally, whether Ayres-2008 supports [Patent Owner’s] construction is irrelevant.” PO Sur-Reply 5 (emphasis added). definition that is contrary to the ordinary meaning of a claim term unless it communicates a deliberate and clear preference for this alternative definition.” Kumar v. Ovonic Battery Co., 351 F.3d 1364, 1368 (Fed. Cir. 2003). There is no indication that the patentee sought to require “minor peaks” within the scope of the claimed invention. Nor are we persuaded that a person of ordinary skill in the art would readily understand the scope of the term “major peaks” to require non-major peaks. We interpret the Specification’s statement that “‘major peaks’ herein refer to peaks higher than the average of the peaks in the result” (Ex. 1001, 13:6–7) to be teaching a person of ordinary skill in the art how to identify or discern “major peaks,” which indicate a principal axis of alignment, from any non-major peaks, which would be caused by something else. We conclude that a person of ordinary skill in the art would consider “major peaks” as used in the ’223 patent as referring to peaks that reflect the sole axis or primary axis of fiber alignment. See, e.g., id. at code (54) (“ALIGNED FIBER AND METHOD OF USE THEREOF”), code (57) (“A scaffold comprising an aligned fiber.”), 1:6–7 (“The invention relates to an aligned fiber and method of use thereof.”), 1:11–12 (“The invention relates to a scaffold comprising an aligned fiber.”), 13:16–17 (“Alignment of the fibers in the scaffold may be measured by a fast Fourier transform (FFT) analysis.”). This would certainly include peaks materially higher than the average of the peaks in the result, but it would not be limited to situations involving peaks of different heights or require so-called minor peaks. Based on the totality of the evidence before us, we do not construe the claims to require non-major peaks.” slip op. at 16

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableNot shown unpatentableMixed

    “Petitioner argues that, for the aligned sample, a major peak occurs at about 90° as identified by Petitioner’s annotation (red arrow). Pet. 30–31. As support, Petitioner directs us to Huang2’s explicit description of what the peak indicates, namely that “[t]he narrow peak of the normalized intensity values in anisotropic [aligned] matrices (Figure 1C) indicated that PCL/Coll nanofibers aligned along a single axis (Fig. 1B).” Id. at 31 (alterations in original) (quoting Ex. 1005, 1794). Patent Owner disputes that the illustrated peak is a major peak solely based on the lack of any lesser peaks. See PO Resp. 13 (“[T]he height of the sole peak is identical to—not higher than—the average height of the peaks in the result.”). As discussed above, however, we do not construe “major peaks” as requiring the existence of non-major peaks. We find that the illustrated peak in the Aniso plot of the FFT analysis results (Figure 1C) is a major peak within the meaning of the claim. The evidence in support of this finding is overwhelming. First, the term “Aniso” as used in Huang2 refers to fibers “with alignment.” Ex. 1005, 1792. Huang2 describes fabricating such matrices of aligned fibers with electrospinning, the same method used to impart alignment in the ’223 patent. Id. at 1791–92. Huang2 visually confirms that the fibers in fact are aligned via scanning electron microscopy. Id. at Fig. 1B. Further, Huang2 explicitly states that the peak illustrated in the Aniso plot of the FFT analysis results (Figure 1C) is caused by the fact that the “PCL/Coll nanofibers aligned along a single axis (Fig. 1B).” Id. at 1794. This is precisely what electrospinning may yield aligned fibers and images of aligned fibers will yield FFT results with major peaks. Ex. 1001, 2:18–19, 4:46–60, 13:16–26. Additionally, Huang2 itself considers the peak illustrated in the Aniso plot of the FFT analysis to be significant, stating: “In contrast [to the Aniso plot], the lack of a significant peak for the fibers collected on a stationary surface [(i.e., without electrospinning)] demonstrated no preferred fiber orientation in the isotropic matrices” (i.e., the Iso plot). Ex. 1005, 1794. Indeed, the asserted major peak in the Aniso plot shown in Huang2’s Figure 1C is higher than any other data point on the plot. For these reasons, we find the peak to be a major peak.15 Petitioner acknowledges that Figure 1C only reports its results” slip op. at 32

  Patent outcomesUS 10,137,223 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · Markman
  Patents in suitUS 10,137,223
• Boe Technology Group Co., Ltd. v. 138 East LCD Advancements LimitedSome claims unpatentable
  PTAB · Dec 1, 2025 · IPR2024-00973 · APJ George R Hoskins · IPR · Final written decision

  Claims 1, 3–7, 9–13, and 15–18 are unpatentable as obvious over Reiner and over Reiner with Takahara; claims 2, 8, and 14 were not shown unpatentable.

  RulingsFinal written decision

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed

    “patentability based solely on arguments considered above in the context of claim 4. See, e.g., PO Resp. 42–43, 47–52. Therefore, Patent Owner has waived any other argument. See Inst. Dec. 44; Paper 10, 10. We adopt Petitioner’s arguments concerning these claims having been obvious over Reiner as our own in this Decision. See Pet. 40–44, 50–56, 57–70, 71; Ex. 1003 ¶¶ 134–142, 154–168, 174–221, 227. Accordingly, we conclude a preponderance of the evidence establishes these claims are unpatentable as having been obvious over Reiner.” slip op. at 83

  • Expert testimonyOther
  • Skill levelOther

  Patent outcomesUS 9,184,157 mixed
  § 103 obviousnesscites KSR · Graham
  Patents in suitUS 9,184,157
• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.Some claims unpatentable
  PTAB · Nov 26, 2025 · IPR2024-00984 · APJ Nabeel U Khan · IPR · Final written decision

  Claims 6 and 7 are unpatentable as obvious over Meulen and Chao; claim 1 was not shown unpatentable because Meulen does not disclose transforming an image captured by its camera.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner argues that a person of ordinary skill in the art in the relevant field “would have a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing, or digital cameras,” or alternatively “would have four years of experience working on image or video processing, or digital cameras.” Pet. 6. Petitioner further argues that an “advanced graduate degree” may “make up for the work experience.” Id. (citing Ex. 1002 ¶¶ 33–34). “Patent Owner applies Petitioner’s proposed level of skill.” PO Resp. 4–5 (citing Ex. 2027 ¶¶ 19–20). We adopt Petitioner’s proposed level of ordinary skill because it is consistent with the level of skill in the art at the time of the invention as reflected by the ’413 patent and the cited prior art.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “From the outset we note that the words of the claim recite “non- uniformly shift[ing] the pixels” and do not recite a “non-linear” transformation. This favors Petitioner’s position, which is based directly off the definition of “non-uniform,” over Patent Owner’s position, which substitutes “non-linear” for “non-uniform.” Generally, then, we would determine the ordinary and customary meaning of the claim term in the context of the entire Specification. Here, however, the ʼ413 patent does not mention “uniform” or “non-uniform” shifting of pixels anywhere except in the claims. The Specification, therefore, provides limited guidance, by itself, as to the ordinary and customary meaning of the term. Nonetheless, even reviewing the portions of the Specification cited by the parties, we see no clear or unambiguous effort to limit the challenged claims to require only non-linear transformations in which the pixels to which a transformation is applied do not have the same amount of shift. is not non-linear. Pet. Reply 1. Specifically, Petitioner argues that the center circle of Figure 2B maintains the original circular shape after the transformation is applied to the image which contradicts Patent Owner’s argument that no two pixels will have the same amount of shift. Pet. Reply 1–2. We agree. In Figure 2B of the ʼ413 patent, the center of the image is chosen to be the region of interest. Ex. 1001, 4:19–21. After the input image goes through linear scaling (step 204) and then non-linear warping (step 206) the circles become more vertically compressed as they approach the top and bottom edges and more horizontally stretched as they approach the left and right edges. Id. at 4:22–30. But “the center circle is fully corrected so that it maintains the original circular shape of the corresponding circle in the input image 212.” Id. at 4:23–25. This means that at least some pixels, such as those of the center circle, undergo the same amount of shift after being transformed.” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “readable instructions” of claims 1 and 2 must occur in a particular order. Specifically, Patent Owner argues that the step of “determine a portion within the input image” must occur after “obtain[ing] an image” and before “apply[ing] a transformation to the input image.” PO Resp. 17 (citing Ex. 2027 ¶ 59). Petitioner argues, on the other hand, that the specification does not require such an order and, in fact, describes an embodiment where such an order is not followed. Pet. 3. We determine that the “determine a portion within the input image” step does not need to occur after the “obtain an image” step and before the “apply a transformation to the input image” step. As Patent Owner itself points out, claims 1 and 2 are apparatus and system claims respectively, and an ordering of the limitations of such claims is not necessary. PO Resp. 17. Even if we were to treat the apparatus and system claims as reciting the steps of a method, “as a general rule the claim is not limited to performance of the steps in the order recited, unless the claim explicitly or implicitly requires a specific order.” Baldwin Graphic Systems, Inc. v. Siebert, Inc., 512 F.3d 1338, 1345 (Fed. Cir. 2008) (citing Interactive Gift Express, Inc. v. Compuserve Inc., 256 F.3d 1323, 1342–43 (Fed. Cir. 2001)). We see nothing in the claims that would cause us to break this general rule. Patent Owner argues that the claims imply a “specific order because the ‘determine a portion’ requirement operates on ‘the [obtained] input image’ and defines the ‘portion’ that is necessary for the 23; Ex. 2027 ¶ 59). Although the steps are recited in a specific order in the claim, as they necessarily must be, the claim does not expressly specify that the certain steps must occur before or after other instructions, nor does logic imply such a requirement. For example, if certain characteristics of the image are known before the image is obtained (e.g. the size, dimensions, resolution, aspect ratio, or content etc.) the determination of the portion of the image could be made before the image is obtained. These characteristics may be based on the specific device taking the image or the subject matter of the image, both of which may be known before the image is captured or obtained. It is, therefore, not necessary that the image be obtained in order for a portion of the image to be determined. Similarly, we do not find the written description to expressly or implicitly specify an order the claimed step of “determine a portion of the input image.” For example, the written description of the ʼ413 patent states that in Figure 2B “the center of the image is chosen to be the region of interest that is most fully corrected and the distortion increases in each direction as the frame boundary is approached.” Ex. 1001, 4:19–22. Patent Owner emphasizes that this disclosure implies that an input image is obtained before the center portion is chosen. PO Resp. 19 (citing Ex. 1001, 3:63–64, 4:19–22). But the description of this embodiment does not expressly recite an order. For example, the description of Figure 2A explains that “an input image is obtained” in step 202, “the image is then scaled” in step 204, and a “non-linear warping is then applied” in step 206. Ex. 1001, 3:63–4:3. This description does not mention “determin[ing] of a portion of the image” as a separate step or as part of the listed steps, and therefore, does not specify an order in which this step must occur. is configured so that some areas of the image are fully corrected geometrically, while some other areas are distorted. . . . [T]he center of the image is chosen to be the region of interest that is most fully corrected and the distortion increases in each direction.” Id. at 4:17–19. This excerpt from the ʼ413 patent, which the Patent Owner specifically relies on (PO Resp. 19), also does not specify an order in which the determination step (choosing of the region of interest) takes place. Moreover, because the ʼ413 patent states that the warp module is configured so that some areas are fully corrected while others are not, the determination step could take place at the time the warp module was configured, presumably before the image was obtained. Finally, the ʼ413 patent states that “in the case, of video, the area may dynamically change between images (e.g. to follow a moving object).” Ex. 1001, 4:34–36. Patent Owner argues that this description “requires first obtaining the image in order to locate the object that is being followed.” PO Resp. 19–20. This embodiment is related to the case of video or a moving object, which the challenged claims do not mention. We, therefore, decline to limit the scope of the claim based on this embodiment. Phillips v. AWH Corp., 415 F.3d 1303, 1323 (Fed. Cir. 2005) (en banc) (“[A]lthough the specification often describes very specific embodiments of the invention, we have repeatedly warned against confining the claims to those embodiments.”).” slip op. at 14

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “Having reviewed the parties’ arguments and cited evidence we determine Petitioner has established, by a preponderance of the evidence, that a POSITA would have been motivated to combine Meulen and Chao. For example, Petitioner argues that “[i]t would have been obvious that when performing image scaling, pixels from the input to output positions are shifted based on a scaling factor.” Pet. 91. Meulen teaches scaling but does not provide the details regarding scaling. E.g., Ex. 1007, 1:55–56, 4:37–49. We agree that in light of Meulen’s disclosure of scaling, a POSITA would have looked to other references, such as Chao, for further details on how to perform scaling. Dr. Katsaggelos provides credible support, testifying that “Meulen mentions ‘compression and/or scaling,’ and provides details on how to perform compression. But Meulen does not disclose the details of how to perform scaling. A POSITA when faced with Meulen and having the knowledge about scaling would have been motivated to turn to a prior art reference that discloses the details of scaling.” Ex. 1002 ¶ 262. Patent Owner argues that Petitioner provides no motivation to combine other than asserting that it involves combining prior art elements. PO Resp. 35 (quoting Pet. 92). As explained above, however, Petitioner does more than just assert that the motivation involves combining prior art elements. Instead, Petitioner explains that Meulen discusses both compression and scaling, and provides details regarding compression but does not provide details on how to scale. Pet. 91–92; Ex. 1002 ¶¶ 262–262. Thus, Meulen teaches that scaling was a known technique. See Hybritech, (“a patent need not teach, and preferably omits, what is well known in the art”). Dr. Katsaggelos testifies that, in this situation, a POSITA would have looked to Chao for details regarding scaling. Ex. 1002 ¶¶ 262–263. We determine this establishes, by a preponderance of the evidence, that a POSITA would have had reason to combine Meulen’s teachings with Chao. Patent Owner draws a distinction between Meulen and Chao, arguing that “Meulen is concerned with modifying content from a media source to be displayed on a device’s screen while Chao, by contrast, is directed to changing the aspect ratio of a document intended for printing.” Id. at 36 (citing Ex. 2027 ¶¶ 89–90). Patent Owner’s argument is contradicted, however, by Chao’s disclosure which states that “after all the background and foreground elements in the image have been resized . . . [t]he image may be output by displaying the image on or as part of: a display screen such as a computer monitor, camera screen, printer screen, printed page, projected image, or the like.” Ex. 1008 ¶ 32. Patent Owner argues that Meulen’s system avoids distortion near the middle where the user’s focus is more likely to be, while Chao, on the other hand, is directed to avoiding distortion of stylized borders on differently sized pages. PO Resp. 36–37 (citing Ex. 1006, 1:26–29; Ex. 1008 ¶¶ 1, 25; Ex. 2027 ¶¶ 91–92). This argument reads the prior art too narrowly and does not address Petitioner’s combination. Petitioner does not rely on Chao for its teaching of avoiding distortion near the borders of the image, but rather on its teaching of scaling the image while maintaining the design intent of the original image. Ex. 1008 ¶ 22; Ex. 1014 ¶ 67. Thus, Petitioner is applying Chao’s techniques of scaling (regardless of where the area of 92. Finally, Patent Owner argues that Chao’s approach of stretching/shrinking only the background and uniformly scaling entire foreground objects is suitable for graphic design but incompatible with Meulen which is concerned with adapting externally derived media source content for display on a fixed size screen. PO Resp. 37–38 (citing Ex. 2027 ¶ 93). We disagree with Patent Owner’s argument because it does not address Petitioner’s combination. Petitioner relies on Chao’s teaching of stretching/shrinking of background elements and applies that stretching/shrinking to Meulen’s images displayed on its screen. Pet. 91–92 (citing Ex. 1008 ¶¶ 28, 63; Ex. 1002 ¶ 263). The fact that Chao applies its teaching to graphic design does not prevent a POSITA from applying those teachings to Meulen’s media content displayed on its screen.” slip op. at 20

  Patent outcomesUS 10,015,413 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,015,413
• Apple Inc. v. Resonant Systems, Inc.Some claims unpatentable
  PTAB · Oct 9, 2025 · IPR2024-00806 · APJ Norman H Beamer · IPR · Final written decision

  Claims 1–8, 15–17, and 20 are unpatentable under § 103; claims 14 and 19 were not shown unpatentable because the proposed paramagnetic flux paths in Wakuda lacked adequate support.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner’s expert declarant contends that person of ordinary skill in the art (POSITA) would have had a degree in mechanical engineering, electrical engineering, physics, or a related technical field, and at least 2–3 years of experience related to the design or development of systems incorporating linear actuators; additional years of experience could substitute for the advanced-level degree. Ex. 1003 ¶ 33. Patent Owner offers “a similar level of ordinary skill in the art.” PO Resp. 3. Based on a review of the record, we adopt Petitioner’s proposed level of ordinary skill in the art because it is consistent with the evidence of record, including the asserted prior art and ’830 patent specification.” slip op. at 11

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for petitioner

    “The parties agree that independent claims 1, 19, and 20 include means plus function limitations under 35 U.S.C. § 112 ¶ 6.8 Pet. 3–7; PO Resp. 6–14. An element in a claim for a combination may be expressed as a means . . . for performing a specified function without the recital of structure, material, or acts in support thereof, and such claim shall be construed to cover the corresponding structure, material, or acts described in the specification and equivalents thereof. 35 U.S.C. § 112 ¶ 6. In particular, the parties agree that the “driving component” and “control component” requirements of independent claims 1, 19, and 20 are means plus function limitations. Pet. 3–7; PO Resp. 6–14. Construing a means plus function limitation under 35 U.S.C. § 112 ¶ 6 involves two steps: 1) identifying the claimed function and 2) identifying in the specification the corresponding structure that performs the claimed function. Med. Instrumentation & Diagnostics Corp. v. Elekta AB, 344 F.3d 1205, 1210 (Fed. Cir. 2003); Cardiac Pacemakers, Inc. v. St. Jude Med., Inc., 296 F.3d 1106, 1119 (Fed. Cir. 2002).” slip op. at 12

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Corresponding structure / algorithm (indefinite if none)Term construed board ownDecided for petitioner

    “Therefore, the specification clearly links the function of “control[ing] supply of power from the power supply to . . . cause the moveable component to oscillate at a frequency . . . specified by one or more stored values” at least to portions of steps 706 and 708 of the flow diagram algorithm of Figure 7A, as described above. Thus, the control component requires a microprocessor and memory with algorithmic structure including a timing algorithm or similar coding for creating a control output signal that flips to control the direction of current flow through a coil (e.g., coil 514, Fig. 5, coil 626, Fig. 6), where the coil is structure that corresponds to the recited “driving component,” as noted above.11 We adopt the District Court’s conclusion in the Apple litigation that the “control component” structure itself does not require an H-bridge switch, but only requires that the processor generates the “d” inputs to the switch; and further that the structure does not require does not require computing initial default values as specified in step 702 of Figure 7A (i.e., values not specified by a user). Ex. 3001, 30–33, 35. This is in accord with settled law 11 “Rather than using a formal timer mechanism, certain implementations may simply employ counted loops or other simple programming techniques for periodically carrying out tasks.” Ex. 1001, 7:17–20. that limits the structure to that necessary to perform the claimed function. 12 By the same token, we modify the District Court’s construction to the extent it would require, based on such steps as 706, 710, and 716, a specific order of the steps of generating the “p” and “d” values. The claims only require the control component to control the power supply to cause oscillation at a specified frequency and amplitude, but do not require the frequency value to be generated before the amplitude value, or vice versa.” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “to include the ability disclosed in Ramsay to allow a user to customize and store parameters associated with haptic effects, such as creating “haptic track files” that specify variations in the amplitude and frequency of the effect over time to achieve a desired effect. Pet. 46–47 (citing Ex. 1006 ¶¶ 15, 25– 28, 37; Ex. 1003 ¶¶ 192–193). Petitioner argues that this combination would have been motivated by the desire to expand the functionalities of haptic devices to allow end users to create and customize haptic effects, to provide a fuller haptic experience, and to be able to store haptic effects to save processing power compared to real-time generated effects. Id. at 47–49 (citing Ex. 1006 ¶¶ 14–15, 30, 47, 53–57; Ex. 1003 ¶¶ 194–196). Petitioner argues that this making combination would have had a reasonable expectation of success given that both references deal with linear actuators, both disclose storing frequency and amplitude values, and the combination involves routine knowledge of software techniques. Id. at 49–50 (citing Ex. 1004, 2:3–9; Ex. 1006 ¶¶ 17, 26–28; Ex. 1003 ¶¶ 197–198). Petitioner further argues that it would have been obvious to use the H-bridge switch of Rossi as part of the Gregorio actuator drive circuit 16 in the asserted Gregorio-Ramsay combination to periodically switch the polarity of drive signals to electric coil 28 of Gregorio, and thus oscillate magnet 27, under the control of a signal from processor 12 of Gregorio. Pet. 56 (citing Ex. 1003 ¶ 211). Petitioner argues that this combination would have been motivated because Gregorio does not disclose implementation details and therefore one of ordinary skill would have looked toward teachings like Rossi to fill in those details, and that an H-bridge switch was a well-known example circuit for implementing a change in “current flow direction/polarity” for “push” and “pull” actions in a system, and was a simple, cost-effective, and reliable circuit design. Id. at 56–58 (citing Ex. 1020, Abstr., Figs. 4, 6, 1:65–3:54; Ex. 1003 ¶¶ 212–217). Petitioner argues that making this combination would have had a reasonable expectation of success given that it involved known techniques through routine circuit design considerations and software instructions for generating the control signal. Id. at 58 (citing Ex. 1003 ¶ 218). Petitioner further argues that it would have been obvious to modify the Gregorio-Ramsay-Rossi combination, using the control algorithm disclosed in Aldrich, to replace the monitoring technique of Gregorio with that of Aldrich to maintain a resonance frequency by incrementing or decrementing the drive frequency. Pet. 58–59 (citing Ex. 1004, 4:22–28, 4:42–48; Ex. 1021, 2; Ex. 1003 ¶ 219). Petitioner’s expert provides implementation details of Aldrich, including that the Aldrich hill-climb technique would use a Boolean value to indicate whether the frequency was being increased, with local variables set to default values, and use integer values when processing sensor signals. Id. at 59–60 (citing Ex. 1021, 2; Ex. 1003 ¶¶ 220–222). Petitioner argues that these modifications would have been motivated to improve the Gregorio system using the Aldrich feedback algorithm for targeting a resonant frequency, given that the Gregorio approach had shortcomings that required a monitoring period with reduced haptic feedback, receiving weak EMF signals. Id. at 61–62 (citing Ex. 2004, 3:65–5:55, 5:63–65; Ex. 1021, 1–3; Ex. 1003 ¶¶ 223–227). Petitioner argues that making this combination would have had a reasonable expectation of success given that it involved known techniques for improvement to yield predictable results, readily implemented via software executed by the microprocessor. Id. at 62–63 (citing Ex. 2004, 2:44–50; Ex. 1021, 2; Ex. 1003 ¶ 229). Patent Owner does not address Petitioner’s arguments regarding the” slip op. at 27

  Patent outcomesUS 9,941,830 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 9,941,830
• Apple Inc. v. Resonant Systems, Inc.All claims unpatentable
  PTAB · Oct 9, 2025 · IPR2025-00680 · APJ Karl D Easthom · IPR · Final written decision

  Claims 2 and 3 are unpatentable under § 103 over Gregorio, Ramsay, Tierling, Rossi, and Aldrich; claim 2 is also unpatentable over Gregorio, Ramsay, Wakuda, Rossi, and Aldrich.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “would have had a degree in mechanical engineering, electrical engineering, physics, or a related technical field, and at least 2–3 years of experience related to the design or development of systems incorporating linear actuators; additional years of experience could substitute for the advanced-level degree. Ex. 1003 ¶ 30. Patent Owner offers “a similar level of ordinary skill in the art.” See PO Resp. 4. Based on a review of the record, we adopt Petitioner’s proposed level of ordinary skill in the art because it is consistent with the evidence of record, including the asserted prior art and ’337 patent specification.” slip op. at 9

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for petitioner

    “An element in a claim for a combination may be expressed as a means . . . for performing a specified function without the recital of structure, material, or acts in support thereof, and such claim shall be construed to cover the corresponding structure, material, or acts described in the specification and equivalents thereof. 35 U.S.C. § 112 ¶ 6. In particular, the parties agree that the “driving component” and “control component” requirements of independent claim 2 are means-plus-function limitations. Pet. 2–6; PO Resp. 7. Construing a means-plus-function limitation under 35 U.S.C. § 112 ¶ 6 involves two steps: 1) identifying the claimed function and 2) identifying in the specification the corresponding structure that performs the claimed function. Med. Instrumentation & Diagnostics Corp. v. Elekta AB, 344 F.3d 1205, 1210 (Fed. Cir. 2003); Cardiac Pacemakers, Inc. v. St. Jude Med., Inc., 296 F.3d 1106, 1119 (Fed. Cir. 2002).” slip op. at 10

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Corresponding structure / algorithm (indefinite if none)Term construed petitioner constructionTerm construed board ownMixed

    “supply of power from the power supply to . . . cause the moveable component to oscillate at a frequency . . . specified by one or more stored values” to portions of steps 706 and 708 of the flow diagram algorithm of Figure 7A, as described above. Thus, the control component requires a microprocessor and memory with algorithmic structure including a timing algorithm or similar coding for creating a control output signal that flips to control the direction of current flow through a coil (e.g., coil 514, Fig. 5, coil 626, Fig. 6), where the coil is structure that corresponds to the recited “driving component,” as noted above.10 We adopt the District Court’s conclusion in the Apple litigation that the “control component” structure itself does not require an H-bridge switch, but only requires that the processor generates the “d” inputs configured to operate a switch or other circuit; and further that the structure does not require does not require computing initial default values as specified in step 702 of Figure 7A (i.e., values not specified by a user). Ex. 3001, 30–33, 35. This is in accord with settled law that limits the structure to that necessary to 10 “Rather than using a formal timer mechanism, certain implementations may simply employ counted loops or other simple programming techniques for periodically carrying out tasks.” Ex. 1001, 7:7–10. perform the claimed function. 11 By the same token, we modify the District Court’s construction to the extent it would require, based on such steps as 706, 710, and 716, a specific order of the steps of generating the “p” and “d” values. The claims only require the control component to control the power supply to cause oscillation at a specified frequency and amplitude, but do not require the frequency value to be generated before the amplitude value, or vice versa.” slip op. at 17

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “The record, including testimony by Dr. Hannaford (Ex. 1003; Ex. 1049), supports Petitioner’s rationale, and shows that one of ordinary skill would have been motivated to combine Gregorio, Ramsay, and Wakuda in the manner proposed. Patent Owner does not address Petitioner’s showing for combining these references with any particularity. See generally PO Resp. We discuss below Patent Owner’s argument that Petitioner’s showing as to limitation 2.f based on the combination of Gregorio and Ramsay is conclusory.” slip op. at 34

  Patent outcomesUS 8,860,337 unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 8,860,337
• Luminex International Co., Ltd. / Menard, Inc. v. Signify Holdings B.V.Some claims unpatentable
  PTAB · Aug 13, 2025 · IPR2024-01469 · APJ Steven M Amundson · IPR · Final written decision

  Claims 1–7, 9–15, and 18–20 are unpatentable; claims 8, 16, and 17 are not determined unpatentable under the asserted prior-art grounds.

  RulingsFinal written decision

  • PTAB / AIA Trials › §315(b) time barNot time barredDecided for petitioner

    “G. Analysis 1. REAL PARTY IN INTEREST Based on the record before us and for the reasons explained below, we disagree with Patent Owner that Menard is a “real party in interest” under § 315(b). See Resp. 77–82; Sur-reply 27–28. First, the circumstances here differ materially from the circumstances in Ventex. There, two agreements defined the relationship between Ventex (the petitioner and manufacturer of Heatwave fabric) and Seirus (the alleged real party in interest and purchaser of Heatwave fabric). Ventex, IPR2017- 00651, Paper 152 at 7 & n.8. First, a 2013 Supplier Agreement “prevented Ventex from selling to Seirus competitors” and included an indemnity provision requiring Ventex to indemnify Seirus for losses arising from Ventex’s failure to perform certain obligations. Id. at 7, 14. Second, a 2016 Exclusive Manufacturing Agreement provided that Ventex would manufacture the Heatwave fabric only for Seirus in exchange for Seirus’s payment of an exclusivity fee. Id. at 7. Columbia (the patent owner) accused Seirus products incorporating the Heatwave fabric of infringing the patent at issue, and Columbia served Seirus with a complaint alleging patent infringement in 2014 more than two years before Ventex filed a petition in 2017. Id. at 5, 7. When determining that Seirus was a “real party in interest” under § 315(b), the Board reasoned that “Ventex and Seirus had a specially structured, preexisting, and well established business relationship with one another, including indemnification and exclusivity arrangements.” Ventex, IPR2017-00651, Paper 152 at 10; see id. at 12. Additionally, the Board noted that certain evidence “suggest[ed] that” slip op. at 32

  • PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner

    “G. Analysis 1. REAL PARTY IN INTEREST Based on the record before us and for the reasons explained below, we disagree with Patent Owner that Menard is a “real party in interest” under § 315(b). See Resp. 77–82; Sur-reply 27–28. First, the circumstances here differ materially from the circumstances in Ventex. There, two agreements defined the relationship between Ventex (the petitioner and manufacturer of Heatwave fabric) and Seirus (the alleged real party in interest and purchaser of Heatwave fabric). Ventex, IPR2017- 00651, Paper 152 at 7 & n.8. First, a 2013 Supplier Agreement “prevented Ventex from selling to Seirus competitors” and included an indemnity provision requiring Ventex to indemnify Seirus for losses arising from Ventex’s failure to perform certain obligations. Id. at 7, 14. Second, a 2016 Exclusive Manufacturing Agreement provided that Ventex would manufacture the Heatwave fabric only for Seirus in exchange for Seirus’s payment of an exclusivity fee. Id. at 7. Columbia (the patent owner) accused Seirus products incorporating the Heatwave fabric of infringing the patent at issue, and Columbia served Seirus with a complaint alleging patent infringement in 2014 more than two years before Ventex filed a petition in 2017. Id. at 5, 7. When determining that Seirus was a “real party in interest” under § 315(b), the Board reasoned that “Ventex and Seirus had a specially structured, preexisting, and well established business relationship with one another, including indemnification and exclusivity arrangements.” Ventex, IPR2017-00651, Paper 152 at 10; see id. at 12. Additionally, the Board noted that certain evidence “suggest[ed] that” slip op. at 32

  • Skill levelOther

    “C. Level of Ordinary Skill in the Art Factors pertinent to determining the level of ordinary skill in the art include (1) the educational level of the inventor; (2) the type of problems encountered in the art; (3) prior-art solutions to those problems; (4) the rapidity with which innovations are made; (5) the sophistication of the technology; and (6) the educational level of workers active in the field. Envtl. Designs, Ltd. v. Union Oil Co., 713 F.2d 693, 696–97 (Fed. Cir. 1983). Not all factors may exist in every case, and one or more of these or other factors may predominate in a particular case. Id. These factors are not exhaustive, but merely a guide to determining the level of ordinary skill in the art. Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007). Moreover, the prior art itself may reflect an appropriate skill level. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). Petitioner asserts that a person of ordinary skill in the art at the ’336 patent’s effective filing date would have had “a bachelor’s degree in mechanical engineering, electrical engineering, optics, or physics with at least three years of experience working in the design of LED lights or lighting fixtures; a master’s degree in one of the above disciplines with at least two years of experience; or equivalent experience.” Pet. 14 (citing Ex. 1004 ¶¶ 26–29). Dr. Eden’s testimony supports Petitioner’s assertion. See Ex. 1004 ¶¶ 27–28. Patent Owner “adopts for purposes of this proceeding only” Petitioner’s description of an ordinarily skilled artisan. Resp. 10 (citing Pet. 14). We adopt Petitioner’s description of an ordinarily skilled artisan because it comports with the technology and claims of the ’336 patent as” slip op. at 40

  • Obviousness (§103) › Objective indicia / secondary considerationsObjective indicia no nexusDecided for petitioner

    “Alleged Objective Indicia of Nonobviousness (i) General Principles Before reaching a conclusion about obviousness, we consider evidence concerning objective indicia of nonobviousness. See Apple, 839 F.3d at 1048. For such evidence to have substantial weight, “its proponent must establish a nexus between the evidence and the merits of the claimed invention.” ClassCo, Inc. v. Apple, Inc., 838 F.3d 1214, 1220 (Fed. Cir. 2016); see Ancora Techs., Inc. v. Roku, Inc., 140 F.4th 1351, 1361 (Fed. Cir. 2025) (noting that the Board did not err by requiring “a nexus to the challenged claims as opposed to the patent as a whole”). “[T]here is no nexus unless the evidence presented is ‘reasonably commensurate with the scope of the claims.’” ClassCo, 838 F.3d at 1220 (quoting Rambus Inc. v. Rea, 731 F.3d 1248, 1257 (Fed. Cir. 2013)). The patentee “bears the burden of showing that a nexus exists.” WMS Gaming, Inc. v. Int’l Game Tech., 184 F.3d 1339, 1359 (Fed. Cir. 1999). A rebuttable presumption of nexus arises “when the patentee shows that the asserted objective evidence is tied to a specific product and that product ‘embodies the claimed features, and is coextensive with them.’” Fox Factory, Inc. v. SRAM, LLC, 944 F.3d 1366, 1373 (Fed. Cir. 2019) (quoting Polaris Indus., Inc. v. Arctic Cat, Inc., 882 F.3d 1056, 1072 (Fed. Cir. 2018)). Whether a rebuttable presumption of nexus arises “turns on the nature of the claims and the specific facts.” Teva Pharms. Int’l GmbH v. Eli Lilly & Co., 8 F.4th 1349, 1362 (Fed. Cir. 2021). The presumption analysis should consider the unclaimed features in the product tied to the objective evidence to assess their significance and impact on the correspondence between the patented invention and the product. Quanergy Sys., Inc. v. Velodyne Lidar USA, Inc., 24 F.4th 1406, 1418 (Fed. Cir. 2022). When, “for example, the patented invention is only a small component of the product tied to the objective evidence, there is no presumption of nexus.” Henny Penny Corp. v. Frymaster LLC, 938 F.3d 1324, 1333 (Fed. Cir. 2019). Absent a presumption of nexus, the patentee may prove nexus by” slip op. at 76

  Patent outcomesUS 10,299,336 mixed
  § 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,299,336

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.