• Google LLC v. Sandpiper CDN, LLCAll claims unpatentable
  PTAB · Oct 9, 2026 · IPR2025-00826 · APJ Michael T Cygan · IPR · Final written decision

  Claims 1–23 are unpatentable under § 103, including over Glines alone and the additional asserted combinations.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art Petitioner asserts that a person of ordinary skill in the art (“POSITA”) at the critical time “would have had at least a bachelor’s degree in computer science, electrical engineering, or a related field, and at least two years of work or research experience in the field of content delivery management or networks,” and that “additional education could substitute for work experience.” Pet. 3 (citing Ex. 1008 ¶¶ 51–53). Patent Owner provides substantially the same assessment. PO Resp. 16. We adopt Petitioner’s proposed level of ordinary skill, as it appears to be consistent with the specification of the ’112 patent and the prior art of record.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b).” 37 C.F.R. § 42.100(b). Under this standard, the words of a claim generally are given their “ordinary and customary meaning,” which is the meaning the term would have to a person of ordinary skill at the time of the invention, in the context of the entire patent including the specification. Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc). Neither party proposes any express claim construction. Pet. 3; PO Resp. 16. We address the parties’ interpretation of the scope of “causing said hostname to be resolved” in our discussion of Petitioner’s assertions for limitation [1.d]. Based on the record before us, we determine that no claim term requires express construction.” slip op. at 8

  • Expert testimonyPetitioner expert creditedDecided for petitioner
  • Strike new argumentNew argument consideredDecided for petitioner

    “We do not agree. The Petition states that Glines discloses that the anycast is resolved by an ISP DNS server. Pet. 20. The Petition identifies Glines’s local ISP DNS resolver 18 as the claimed ISP DNS server. Id. The Petitioner further asserts that Glines’s ISP DNS resolver 18 sends the request to the DNS server 38, but states that “Glines’s local DNS resolver, an ISP DNS server, thus causes the hostname . . . to be resolved.” Id. at 21–22. The Petition also drew an analogy with the ’112 patent and the role of local DNS server 70a in the Petition. See Pet. 20–21. Because the Petition and the Reply both identify Glines’s local ISP DNS resolver 18 as causing the hostname to be resolved, Petitioner has not advanced a new theory of unpatentability in its Reply. 6 At oral argument, Patent Owner suggested a narrower claim reading, but admitted that this had not been briefed. Tr. 36:15–38:9, 44:9–16. We do not address this reading because it was not set forth in the briefing. In the briefing, Patent Owner took the broader reading discussed here. See Tr. 41:12–23; PO Sur-reply 7.” slip op. at 13

  Patent outcomesUS 9,021,112 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,021,112
• Runergy Alabama Inc. / Runergy USA Inc. et al. v. Trina Solar Co., Ltd.All claims unpatentable
  PTAB · Apr 15, 2026 · IPR2025-00187 · APJ Debra L Dennett · IPR · Final written decision

  Claims 1–17 are unpatentable under § 103, principally because Chang in view of Jin renders them obvious; the Jin/Feldmann grounds were not shown.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art would have been someone with an advanced degree involving the disciplines of electrical engineering, applied physics, chemistry, or materials science, and at least two years of experience designing, developing, or researching in the field. Alternatively, that person would have had a bachelor’s degree in electrical engineering, applied physics, or materials science, and at least three years of experience designing, developing, or researching in the field. Pet. 4 (citing Ex. 1003 ¶ 49).” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner contends that “[n]o claim construction is believed to be necessary to resolve this Petition.” Pet. 24. Patent Owner does not address claim construction. See generally Resp.; Sur-reply. For purposes of this Decision, we need not expressly construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 11

  • Expert testimonyPatent owner expert creditedDecided for patent owner

    “gap-T isolation region would prevent shorting and that extending the tunnel oxide layer the edge “could trap impurities and create negative fixed oxide charges, which could then create a p-type inversion in the n-type base substrate, leading to a leakage path to the p-type emitter on the front of the solar cell” (Ex. 1003 ¶ 116 (emphasis added)) but are not convinced by his equivocal testimony. Notably too, neither Jin nor Feldmann discuss issues relating to trapped impurities and Petitioner, as well as Dr. Banerjee, fail to direct our attention to any record evidence to support their contentions. Rather, we are persuaded by Dr. Peckerar’s testimony that as a general rule in semiconductor process technology, a bare silicon surface should not be left unpassivated after processing. Elemental silicon is highly chemically reactive. As such, the bare surface is a “magnet” for defects and contamination. Leaving the tunnel oxide in place across the entire substrate backside would reduce this problem. Ex. 2001 ¶ 142. Dr. Peckerar further explains that a person of ordinary skill in the art would have known how to avoid shorting and leakage. In particular, he testifies that the manner by which charge is transported through a tunnel oxide can be controlled by adjusting manufacturing parameters such as time, temperature, thickness, and ambient impurities. A POSITA would plainly have adjusted these parameters to ensure that the tunnel oxide operates as intended (i.e., minimizes recombinant losses while transporting charge carriers to the backside of the solar cell) while avoiding undesirable leakage current. Because unwanted leakage charge can be avoided via other means during manufacture, there would have been no reason to reduce the physical extent of the tunnel oxide. Ex. 2001 ¶ 152 (referring to Ex. 2001 ¶¶ 149–151). Moreover, Dr. Peckerar testifies that “Dr. Banerjee also appears to be arguing that incorporation of impurities into the oxide will produce a MOSFET-like structure, with the contaminated oxide acting as a MOS gate leading to enhanced leakage,” but, for that to occur, “the source and drain areas would need to be of the same type.” Ex. 2001 ¶ 159. Here however, “the tunnel oxide layer is located between an n-type polysilicon layer and p-type frontside emitter layer” so “[n]o MOSFET-like structure can form because the source and drain are of different types.” Ex. 2001 ¶ 159. Neither Petitioner nor Dr. Banerjee address or dispute this testimony. See generally Reply; Ex. 1037. We credit Dr. Peckerar’s testimony in this regard. Without an apparent reason to modify the teachings of Jin and Feldmann to” slip op. at 19

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentableMotivation not foundNot shown unpatentable

    “On this complete trial record, we agree with Patent Owner. It is improper to base a conclusion of obviousness upon facts gleaned only through hindsight. “The invention must be viewed not after the blueprint has been drawn by the inventor, but as it would have been perceived in the state of the art that existed at the time the invention was made.” Sensonics, Inc. v. Aerosonic Corp., 81 F.3d 1566, 1570 (Fed. Cir. 1996) (citing Interconnect Planning Corp. v. Feil, 774 F.2d 1132, 1138 (Fed. Cir. 1985)). Therefore, “to establish a prima facie case of obviousness based on a combination of elements disclosed in the prior art, the [Petitioner] must articulate the basis on which it concludes that it would have been obvious to make the claimed invention.” Id. Impermissible hindsight is inferred when the specific understanding or principle within the knowledge of one of ordinary skill in the art that would motivate one (with no knowledge of the claimed invention) to make the proposed combination has not been explained. In re Rouffet, 149 F.3d 1350, 1358 (Fed. Cir. 1998).” slip op. at 17

  Patent outcomesUS 10,230,009 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,230,009
• Runergy Alabama Inc. / Runergy USA Inc. et al. v. Trina Solar Co., Ltd.All claims unpatentable
  PTAB · Apr 15, 2026 · IPR2025-00006 · APJ Debra L Dennett · IPR · Final written decision

  Claims 1–17 are unpatentable under § 103, principally over Chang and Jin; the Board rejected the Jin and Feldmann combinations for lack of a reason to combine.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In light of the record before us, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’009 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand the ’009 patent and the prior art.” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner contends that “[n]o claim construction is believed to be necessary to resolve this Petition.” Pet. 24. Patent Owner does not address claim construction. See generally Resp.; Sur-reply. For purposes of this Decision, we need not expressly construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 11

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentableMotivation not foundNot shown unpatentable

    “However, Petitioner proposes to remove the tunnel oxide layer from the edge and offers little explanation of why the skilled artisan would apply Jin’s gap- T isolation region to both of Feldmann’s polysilicon and tunnel oxide layers. As noted above, Petitioner states that the skilled artisan would have included Jin’s gap-T isolation region in order to prevent shorting. Pet. 26. Petitioner’s reasoning is questionable—supported only by the conclusory testimony of Dr. Banerjee. Dr. Banerjee’s testimony offers no more evidentiary support than provided in the Petition. Compare Ex. 1003 ¶ 116 with Pet. 26). Petitioner cannot satisfy its burden of proving obviousness by employing “mere conclusory statements.” See Magnum, 829 F.3d at 1380. We acknowledge Dr. Banerjee’s testimony that the combination of Jin’s gap-T isolation region would prevent shorting and that extending the tunnel oxide layer the edge “could trap impurities and create negative fixed oxide charges, which could then create a p-type inversion in the n-type base substrate, leading to a leakage path to the p-type emitter on the front of the solar cell” (Ex. 1003 ¶ 116 (emphasis added)) but are not convinced by his equivocal testimony. Notably too, neither Jin nor Feldmann discuss issues relating to trapped impurities and Petitioner, as well as Dr. Banerjee, fail to direct our attention to any record evidence to support their contentions. Rather, we are persuaded by Dr. Peckerar’s testimony that as a general rule in semiconductor process technology, a bare silicon surface should not be left unpassivated after processing. Elemental silicon is highly chemically reactive. As such, the bare surface is a “magnet” for defects and contamination. Leaving the tunnel oxide in place across the entire substrate backside would reduce this problem. Ex. 2001 ¶ 142. Dr. Peckerar further explains that a person of ordinary skill in the art would have known how to avoid shorting and leakage. In particular, he testifies that the manner by which charge is transported through a tunnel oxide can be controlled by adjusting manufacturing parameters such as time, temperature, thickness, and ambient impurities. A POSITA would plainly have adjusted these parameters to ensure that the tunnel oxide operates as intended (i.e., minimizes recombinant losses while transporting charge carriers to the backside of the solar cell) while avoiding undesirable leakage current. Because unwanted leakage charge can be avoided via other means during manufacture, there would have been no reason to reduce the physical extent of the tunnel oxide. Ex. 2001 ¶ 152 (referring to Ex. 2001 ¶¶ 149–151). Moreover, Dr. Peckerar testifies that “Dr. Banerjee also appears to be arguing that incorporation of impurities into the oxide will produce a MOSFET-like structure, with the contaminated oxide acting as a MOS gate leading to enhanced leakage,” but, for that to occur, “the source and drain areas would need to be of the same type.” Ex. 2001 ¶ 159. Here however, “the tunnel oxide layer is located between an n-type polysilicon layer and p-type frontside emitter layer” so “[n]o MOSFET-like structure can form because the source and drain are of different types.” Ex. 2001 ¶ 159. Neither Petitioner nor Dr. Banerjee address or dispute this testimony. See generally Reply; Ex. 1037. We credit Dr. Peckerar’s testimony in this regard.” slip op. at 19

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable

    “configuration in which the emitter area and back surface field area are not adjacent to each other, thus eliminating “the necessity of performing an isolation process when the emitter area [] and the back surface field are [] are formed to be adjacent to each other.” Resp. 42 (citing Ex. 1013 ¶ 76). In so doing, Patent Owner side steps Chang’s unambiguous definition that “‘entirely formed’ means that an element such as a layer is formed over an entire surface without an empty area or a non-coverage area, or is formed over an entire area excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like.” Ex. 1013 ¶¶ 45, 51, 56, 62 (emphasis added). Chang discloses that a first tunneling layer, a first portion of an emitter area, a second tunneling layer, and a back surface field area may each be “formed over an entire area excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like.” Id. Chang’s definition of “entirely formed” (“excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like”) implies use of a mask. See Chang ¶ 62; Tr. 15:20–17:11. Dr. Banerjee testifies that the need to electrically isolate the emitter region from the back surface field was well known in the field, and both Chang and Jin teach backside isolation regions. Ex. 1003 ¶¶ 73, 217 (citing Ex. 1023 § 1). Chang also discloses that the emitter area may be formed by thermal diffusion, ion implantation or the like. Ex. 1013 ¶ 98. Petitioner persuasively argues that Chang’s disclosure of thermal diffusion of the emitter layer would result in dopants diffused into not only the top surface of the substrate, but also the exposed lateral surfaces, a problem also noted in Jin. See Pet. 11–12; Reply 6–7; Ex. 1003 ¶ 71; Ex. 1009 ¶¶ 57–58. Jin discloses avoiding shorting of the emitter layer and back surface field layer by edge isolation on the back surface field layer using a mask to create a “gap-T.” Ex. 1009 ¶¶ 57–58, 83. Chang discloses excluding a tunneling layer and a base surface field area from periphery region and isolation region. Ex. 1013 ¶¶ 56, 62. Using a mask, as implied in Chang and explicitly disclosed in Jin, would “pre-designate” and/or “inevitably form” the regions where the tunneling layer and back surface field area are excluded. We credit Dr. Banerjee’s testimony that one of ordinary skill in the art reviewing Chang would therefore understand the importance of implementing the isolation region in Chang’s device, and would therefore be motivated to look to other references, such as Jin (which was assigned to the same original assignee as Chang, LG Electronics, EX1009-Jin, face; EX1013-Chang, face) to understand details regarding Chang’s isolation region.” slip op. at 32

  Patent outcomesUS 10,230,009 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,230,009
• Runergy Alabama Inc. / Runergy USA Inc. et al. v. Trina Solar Co., Ltd.All claims unpatentable
  PTAB · Apr 15, 2026 · IPR2025-00918 · APJ Avelyn M Ross · IPR · Final written decision

  Claims 1–11 are unpatentable under § 103 over Chang and Jin; the Board rejected the Jin and Feldmann based grounds for lack of a reason to combine without hindsight.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art would have been someone with an advanced degree involving the disciplines of electrical engineering, applied physics, chemistry, or materials science, and at least two years of experience designing, developing, or researching in the field. Alternatively, that person would have had a bachelor’s degree in electrical engineering, applied physics, or materials science, and at least three years of experience designing, developing, or researching in the field.” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner contends that “[n]o claim construction is believed to be necessary to resolve this Petition.” Pet. 23. And, Patent Owner does not address claim construction. See generally PO Resp. As neither party proposes an express construction for our consideration and because we determine that an express claim construction is not necessary for us to render a decision in this matter, we do not construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentableMotivation not foundNot shown unpatentable

    “base a conclusion of obviousness upon facts gleaned only through hindsight. “The invention must be viewed not after the blueprint has been drawn by the inventor, but as it would have been perceived in the state of the art that existed at the time the invention was made.” Sensonics, Inc. v. Aerosonic Corp., 81 F.3d 1566, 1570 (Fed. Cir. 1996) (citing Interconnect Planning Corp. v. Feil, 774 F.2d 1132, 1138 (Fed. Cir. 1985)). Therefore, “to establish a prima facie case of obviousness based on a combination of elements disclosed in the prior art, the [Petitioner] must articulate the basis on which it concludes that it would have been obvious to make the claimed invention.” Id. Impermissible hindsight is inferred when the specific understanding or principle within the knowledge of one of ordinary skill in the art that would motivate one (with no knowledge of the claimed invention) to make the proposed combination has not been explained. In re Rouffet, 149 F.3d 1350, 1358 (Fed. Cir. 1998).” slip op. at 16

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable

    “Patent Owner focuses on Chang’s description in paragraph 76 of a single configuration in which the emitter area and back surface field area are not adjacent to each other, thus eliminating “the necessity of performing an isolation process when the emitter area [] and the back surface field are [] are formed to be adjacent to each other.” PO Resp. 42–43 (citing Ex. 1013 ¶ 76). But, in so doing, Patent Owner side steps Chang’s unambiguous definition that “‘entirely formed’ means that an element such as a layer is formed over an entire surface without an empty area or a non-coverage area, or is formed over an entire area excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like.” Ex. 1013 ¶¶ 45, 51, 56, 62 (emphasis added). Chang discloses that a first tunneling layer, a first portion of an emitter area, a second tunneling layer, and a back surface field area may each be “formed over an entire area excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like.” Ex. 1013 ¶¶ 45, 51, 56, 62. Chang’s definition of “entirely formed” (“excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like”) implies use of a mask. See Ex. 1013 ¶ 62; Tr. 15:20– 17:11. Dr. Banerjee testifies that the need to electrically isolate the emitter region from the back surface field was well known in the field, and both Chang and Jin teach backside isolation regions. Ex. 1003 ¶¶ 70–81, 91–96, 200 (citing Ex. 1026 § 1 and stating that “[b]oth Chang and Jin likewise teach backside isolation regions”). Chang also discloses that the emitter area may be formed by “thermal diffusion, ion implantation or the like.” Ex. 1013 ¶ 98. Petitioner persuasively argues that Chang’s disclosure of thermal diffusion of the emitter layer would result in dopants diffused into not only the top surface of the substrate, but also the exposed lateral surfaces, a problem also noted in Jin. See Pet. 11–12; Pet. Reply 6–7; Ex. 1003 ¶ 71; Ex. 1009 ¶¶ 57–58. Jin discloses avoiding shorting of the emitter layer and back surface field layer by edge isolation on the back surface field layer using a mask to create a “gap-T.” Ex. 1009 ¶¶ 57–58, 83. Chang discloses excluding the second tunneling layer and a base surface field area from periphery region and isolation portion. Ex. 1013 ¶¶ 56, 62. Using a mask, as implied in Chang and explicitly disclosed in Jin, would “pre-designate” and/or “inevitably form” the regions where the tunneling layer and back surface field area are excluded. We credit Dr. Banerjee’s testimony that one of ordinary skill in the art “reviewing Chang would therefore understand the importance of implementing the isolation region in Chang’s device, and would therefore be motivated to look to other references, such as Jin (which was assigned to the same original assignee as Chang, LG Electronics, EX1009-Jin, face; EX1013-Chang, face) to understand details regarding Chang’s isolation region.” Ex. 1003 ¶ 201.” slip op. at 33

  Patent outcomesUS 9,722,104 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,722,104
• Runergy Alabama Inc. / Runergy USA Inc. et al. v. Trina Solar Co., Ltd.All claims unpatentable
  PTAB · Apr 15, 2026 · IPR2025-00007 · APJ Avelyn M Ross · IPR · Final written decision

  Claims 1–11 are unpatentable under §103 over Chang and Jin because the combination teaches the claimed isolation portion and the claimed tapering.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedOther

    “Petitioner contends that a person of ordinary skill in the art would have been someone with an advanced degree involving the disciplines of electrical engineering, applied physics, chemistry, or materials science, and at least two years of experience designing, developing, or researching in the field. Alternatively, that person would have had a bachelor’s degree in electrical engineering, applied physics, or materials science, and at least three years of experience designing, developing, or researching in the field. Pet. 4 (citing Ex. 1003 ¶ 49). Patent Owner does not address the level of ordinary skill in the art. See generally PO Resp; Sur-reply. In light of the complete trial record before us, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’104 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand the ’104 patent and the prior art.” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner contends that “[n]o claim construction is believed to be necessary to resolve this Petition.” Pet. 23. And, Patent Owner does not address claim construction. See generally PO Resp. As neither party proposes an express construction for our consideration and because we determine that an express claim construction is not necessary for us to render a decision in this matter, we do not construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightTeaching away not foundNot shown unpatentable

    “On this complete trial record, we agree with Patent Owner. It is improper to base a conclusion of obviousness upon facts gleaned only through hindsight. “The invention must be viewed not after the blueprint has been drawn by the inventor, but as it would have been perceived in the state of the art that existed at the time the invention was made.” Sensonics, Inc. v. Aerosonic Corp., 81 F.3d 1566, 1570 (Fed. Cir. 1996) (citing Interconnect Planning Corp. v. Feil, 774 F.2d 1132, 1138 (Fed. Cir. 1985)). Therefore, “to establish a prima facie case of obviousness based on a combination of elements disclosed in the prior art, the [Petitioner] must articulate the basis on which it concludes that it would have been obvious to make the claimed invention.” Id. Impermissible hindsight is inferred when the specific understanding or principle within the knowledge of one of ordinary skill in the art that would motivate one (with no knowledge of the claimed invention) to make the proposed combination has not been explained. In re Rouffet, 149 F.3d 1350, 1358 (Fed. Cir. 1998).” slip op. at 16

  • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

    “However, Petitioner proposes to remove the tunnel oxide layer from the edge and offers little explanation of why the skilled artisan would apply Jin’s gap- T isolation region to both of Feldmann’s polysilicon and tunnel oxide layers. As noted above, Petitioner states that the skilled artisan would have included Jin’s gap-T isolation region in order to prevent shorting. Pet. 25. Petitioner’s reasoning is questionable—supported only by the conclusory testimony of Dr. Banerjee. Dr. Banerjee’s testimony offers no more evidentiary support than provided in the Petition. Compare Ex. 1003 ¶ 113, with Pet. 25. Petitioner cannot satisfy its burden of proving obviousness by employing “mere conclusory statements.” Magnum Oil, 829 F.3d at 1380. We acknowledge Dr. Banerjee’s testimony that the combination of Jin’s gap-T isolation region would prevent shorting and that extending the tunnel oxide layer the edge “could trap impurities and create negative fixed oxide charges, which could then create a p-type inversion in the n-type base substrate, leading to a leakage path to the p-type emitter on the front of the solar cell” (Ex. 1003 ¶ 113 (emphasis added)) but are not convinced by his equivocal testimony. Notably too, neither Jin nor Feldmann discuss issues relating to trapped impurities and Petitioner, as well as Dr. Banerjee, fail to direct our attention to any record evidence to support their contentions. Rather, we are persuaded by Dr. Peckerar’s testimony that as a general rule in semiconductor process technology, a bare silicon surface should not be left unpassivated after processing. Elemental silicon is highly chemically reactive. As such, the bare surface is a “magnet” for defects and contamination. Leaving the tunnel oxide in place across the entire substrate backside would reduce this problem. Ex. 2001 ¶ 142. Dr. Peckerar further explains that a person of ordinary skill in the art would have known how to avoid shorting and leakage. In particular, he testifies that the manner by which charge is transported through a tunnel oxide can be controlled by adjusting manufacturing parameters such as time, temperature, thickness, and ambient impurities. A POSITA would plainly have adjusted these parameters to ensure that the tunnel oxide operates as intended (i.e., minimizes recombinant losses while transporting charge carriers to the backside of the solar cell) while avoiding undesirable leakage current. Because unwanted leakage charge can be avoided via other means during manufacture, there would have been no reason to reduce the physical extent of the tunnel oxide.” slip op. at 18

  Patent outcomesUS 9,722,104 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,722,104
• Apple Inc. v. Smith Interface Technologies, LLCNo claims unpatentable
  PTAB · Feb 24, 2026 · IPR2024-01256 · APJ Miriam L Quinn · IPR · Final written decision

  Claims 1–6, 10–14, 16, and 17 were not shown unpatentable because Ahn and Chaudhri did not teach or suggest the claimed movement of an object during the gesture.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for patent owner

    “interface objects and, more specifically, the display of user interfaces on applications, in accordance with contacts on the touch-sensitive surface of a display. Ex. 1001, (54), Abstr. Consistent with the scope of the ’727 patent, we find that the level of skill in the art is reflected in a person having a bachelor’s degree in computer science, computer engineering, electrical engineering, human-computer interaction, or a comparable field and at least two years of professional experience working with graphical user interfaces, human-computer interfaces, or equivalents.” slip op. at 6

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Because there is no dispute as to the scope and meaning of these terms, and for consistency with the Decision on Institution, we apply the meaning of the terms “blur” and “distance magnitude” as stated above where applicable. However, we note that our determination does not hinge on the meaning of these terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (only those terms that are in controversy need be construed, and only to the extent necessary to resolve the controversy) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 8

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable

    “it was “known to utilize ‘cues’ to help the user know what gesture to utilize and whether they are correctly performing the gesture (e.g., graphics such as movable images that help the user visualize the correct gesture and how to complete it successfully).” Pet. 40 (citing Ex. 1005, Abstract, ¶¶ 54, 62, 73). This sentence does not cure the deficiency noted above regarding Petitioner’s reliance on Ahn’s graphic shadow moving with a gesture. Chaudhri is relied on for the proposition that, Ahn’s graphic shadow is “[i]ndeed” a movable image known to give a user a visual cue. Id. But no such “cue” is provided in Ahn by the graphical shadow alone, because there is no movement of that object. The Petition does not present argument that a Chaudhri object is the movable object or how any of Chaudhri’s teachings of movable objects would have suggested to modify Ahn “to thereby move” the graphical shadow.” slip op. at 18

  • Strike new argumentNew argument disregardedDecided for patent owner

    “the theory that Ahn’s graphic shadow moves. Reply 3−4. Petitioner interprets the sentences in Ahn we have analyzed above in conjunction with testimony of Dr. Terveen to argue that temporal descriptions in Ahn make it obvious for a person of ordinary skill in the art to drag in the right direction while continuing to press the graphic 1800. Id. (citing Exs. 1004 ¶¶ 117−119, Ex. 1023 ¶ 10). The Petition, however, relies on an Ahn disclosing a moving graphic shadow according to the embodiment of Figure 18(a), as described in paragraph 118. Petitioner now changes its theory of how Ahn’s graphic shadow would move according to paragraph 119, i.e., that although the graphic shadow is merely pressed (in the embodiment shown in Figure 18(b)) it would also be dragged while pressed. Reply 3. Not only is this a shift from the theory Petitioner presents in the Petition, it is not persuasive. As Patent Owner argues, and we agree, there is no cogent explanation for modifying the graphic shadow embodiment of Figure 18(b), especially in light of Ahn’s disclosure that the graphic shadow disappears when pressed and the menu list is displayed as emerging. Sur-reply 2−3. In other words, Petitioner’s new argument does not account for Ahn’s teaching that the objective of the graphic shadow is merely to notify the user of the start of the gesture, and once that start of the gesture is detected (the press on the graphic shadow), paragraph 119 informs us that there is no longer a need for the graphic shadow—it disappears from the display. Ex. 1004 ¶ 119. The Petition does not offer any argument for a theory in which the gesture of paragraph 119 (the press, not a touch and drag operation) results in graphic 1800 disappearing, while also moving during the disappearance. We are mindful that “[i]t is impermissible within the framework of section 103 to pick and choose from any one reference only so much of it as will support a given position to the exclusion of other parts necessary to the full appreciation of what such reference fairly suggests to one skilled in the art.” Bausch & Lomb, Inc. v. Barnes-Hind / Hydrocurve, Inc., 796 F.2d 443, 448 (Fed. Cir. 1986)). Consequently, we determine that Petitioner’s argument in Reply belatedly relying on the different embodiment of paragraph 119 is improper new argument, and that even if considered it is not persuasive.” slip op. at 20

  Patent outcomesUS 11,740,727 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 11,740,727
• Facebook, Inc. / SAP America, Inc. et al. v. Express Mobile, Inc.All claims unpatentable
  PTAB · Jan 16, 2026 · IPR2022-00518 · APJ Jeffrey S Smith · IPR · Remand

  Claims 1–4 and 6 are unpatentable under §103 because the prior-art combinations teach limitations 1(c) and 1(g) under the proper construction of “style.”

  RulingsRemand decision

  • RemandOther

    “As directed by the Federal Circuit, we determine whether the prior art combination teaches limitations 1(c) and 1(g) under the proper construction of “style,” but otherwise do not revisit our analysis of claim 1. Remand Opinion 7, 13–14. The Federal Circuit construed “style” to mean “a collection of one or more settings that is defined separately from any single object but can be associated with one or more objects,” with the understanding that “associated with one or more” means capable of being associated with both one object and more than one object. Id. at 14.” slip op. at 4

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner

    “Because the Specification discloses that data defines an object, we construe the plain meaning of the claimed “object,” read in light of the Specification of the ’168 patent, as encompassing data that defines the object. See Phillips v. AWH Corp., 415 F.3d 1303, 1315 (Fed. Cir. 2005) (The “specification . . . is the single best guide to the meaning of a disputed term.”); Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1583 (Fed. Cir. 1996); (Excluding an embodiment in the specification from “the scope of the patent claim . . . is rarely, if ever, correct.”). Further, because the Specification discloses that data defines image objects, and that objects include images, we construe the plain meaning of the claimed “image object,” read in light of the Specification, as encompassing data that defines an image, such as one of the 12 different pocket watch images of Lemay Web.” slip op. at 9

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “We agree with Petitioner. As discussed above, the plain meaning of an “image object” read in light of the Specification encompasses data that defines an image, such as each of the 12 different pocket watch images of Lemay Web. Ex. 1004, 89–90. Therefore, the HTML file of Lemay Web, which specifies attributes including width, height, pause value, and repeat value of the pocket watch image objects, is “capable of being applied to more than one” image object, such as each of the 12 different pocket watch image objects described by Lemay Web. Id.” slip op. at 11

  • Strike new argumentNew argument consideredDecided for petitioner

    “We agree with Petitioner. The Board and Petitioner understood the meaning of “or” in the phrase “one or more objects” in Patent Owner’s proposed construction of style as meaning that “a style . . . can be associated with just one object.” Dec. 22; see Reply 4–5. The Federal Circuit “ultimately conclude[d] that Express Mobile’s proposed construction, with ‘or’ properly interpreted,” means “that the claimed ‘style’ must be capable of being applied to both one and more than one ‘object,’” and “remand[ed] for further proceedings in view of the correct claim construction.” Remand Opinion 13. In doing so, the Federal Circuit stated that “[i]t may be that under the correct claim construction, the Board finds that Lemay Web teaches the claimed ‘style’; however, that is still an open fact question for the Board to decide in the first instance.” Id. at n.6. Given that the Federal Circuit has ordered the Board to determine whether the prior art teaches the claimed “style” under the proper construction, we find that Petitioner’s arguments on this issue are timely.” slip op. at 6

  Patent outcomesUS 7,594,168 unpatentable
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 7,594,168
• Facebook, Inc. / SAP America, Inc. et al. v. Express Mobile, Inc.All claims unpatentable
  PTAB · Jan 16, 2026 · IPR2022-00597 · APJ Jeffrey S Smith · IPR · Remand

  Claims 1–4 and 6 are unpatentable under §103 over both listed prior art combinations; Lemay Web teaches the claimed style under the Federal Circuit’s construction.

  RulingsRemand decision

  • RemandOther

    “As directed by the Federal Circuit, we determine whether the prior art combination teaches limitations 1(c) and 1(g) under the proper construction of “style,” but otherwise do not revisit our analysis of claim 1. Remand Opinion 7, 13–14. The Federal Circuit construed “style” to mean “a collection of one or more settings that is defined separately from any single object but can be associated with one or more objects,” with the understanding that “associated with one or more” means capable of being associated with both one object and more than one object. Id. at 14.” slip op. at 4

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “We agree with Petitioner. As discussed above, the plain meaning of an “image object” read in light of the Specification encompasses data that defines an image, such as each of the 12 different pocket watch images of Lemay Web. Ex. 1004, 89–90. Therefore, the HTML file of Lemay Web, which specifies attributes including width, height, pause value, and repeat value of the pocket watch image objects, is “capable of being applied to more than one” image object, such as each of the 12 different pocket watch image objects described by Lemay Web. Id.” slip op. at 11

  • Strike new argumentNew argument consideredDecided for petitioner

    “We agree with Petitioner. The Board and Petitioner understood the meaning of “or” in the phrase “one or more objects” in Patent Owner’s proposed construction of style as meaning that “a style . . . can be associated with just one object.” Dec. 22; see Reply 4–5. The Federal Circuit “ultimately conclude[d] that Express Mobile’s proposed construction, with ‘or’ properly interpreted,” means “that the claimed ‘style’ must be capable of being applied to both one and more than one ‘object,’” and “remand[ed] for further proceedings in view of the correct claim construction.” Remand Opinion 13. In doing so, the Federal Circuit stated that “[i]t may be that under the correct claim construction, the Board finds that Lemay Web teaches the claimed ‘style’; however, that is still an open fact question for the Board to decide in the first instance.” Id. at n.6. Given that the Federal Circuit has ordered the Board to determine whether the prior art teaches the claimed “style” under the proper construction, we find that Petitioner’s arguments on this issue are timely.” slip op. at 6

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther

    “Contrary to Patent Owner’s contention, the Specification discloses, “Data that defines text button, image, paragraph, or other parent objects . . . can be stored in two-dimensional arrays (by web page and by object number).” Ex. 1001, 22:11–13 (emphasis added). The Specification further discloses that “objects . . . include colors, fonts, images, audio clips, video clips, text areas, URLs and thread objects.” Id. at 2:16–17 (emphasis added); see id. at 8:40. We highlight that the Specification’s use of “object” is consistent with a definition of “object” in the computing art at the time of the invention, which is “(2) A passive entity that contains or receives data; for example, bytes, blocks, clocks fields, files . . . .” George McDaniel, IBM Dictionary of Computing, McGraw-Hill, Inc. 1994, p. 471 (Ex. 3001). Because the Specification discloses that data defines an object, we construe the plain meaning of the claimed “object,” read in light of the Specification of the ’168 patent, as encompassing data that defines the object. See Phillips v. AWH Corp., 415 F.3d 1303, 1315 (Fed. Cir. 2005) (The “specification . . . is the single best guide to the meaning of a disputed term.”); Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1583 (Fed. Cir. 1996); (Excluding an embodiment in the specification from “the scope of the patent claim . . . is rarely, if ever, correct.”). Further, because the Specification discloses that data defines image objects, and that objects include images, we construe the plain meaning of the claimed “image object,” read in light of the Specification, as encompassing data that defines an image, such as one of the 12 different pocket watch images of Lemay Web.” slip op. at 8

  Patent outcomesUS 7,594,168 unpatentable
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 7,594,168
• GE Healthcare Ltd. v. The Johns Hopkins UniversityInstituted
  PTAB · Jan 14, 2026 · PGR2025-00059 · APJ Devon Zastrow Newman · PGR · Institution

  The Board instituted post-grant review of claims 1–4 on all four asserted grounds, finding a sufficient preliminary showing of obviousness and lack of enablement.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “V. CONCLUSION Petitioner has, at this stage, established that it will more likely than not prevail in showing that at least one of the challenged claims is unpatentable. This determination is, however, based on a preliminary record and is not final on any issues of patentability. We will make a final determination on the patentability of the challenged claims, as necessary and applying the preponderance of the evidence standard, based on a fully developed record through trial. VI. ORDER In consideration of the foregoing, it is hereby: ORDERED that, pursuant to 35 U.S.C. § 324(a) post grant review of claims 1–4 of the ’233 patent is hereby instituted on the grounds set forth in the Petition, commencing on the entry date of this Order, and pursuant to 35 U.S.C. § 324(d) and 37 C.F.R. § 42.4, notice is hereby given of the institution of a trial; and” slip op. at 40

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner does not proffer a description of a POSA. See generally, Prelim. Resp. For the purposes of this decision, on the record at this time, we find that Petitioner’s definition appears consistent with the level of skill shown in the prior art references of record, and apply it herein. See Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007). We invite the parties to further address the definition of a POSA during trial should they find it necessary.” slip op. at 7

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “In addition, the opinion stated in the Pomper Declaration that “the term of ‘low molecular weight’ is well accepted in the chemical arts” and the declarant “recognize[s] that low molecular weight compounds would have a molecular weight of typically from about 50 Daltons to about 1,500 Daltons” is offered by a co-inventor. We, as factfinder, have discretion to weigh the credibility of expert witnesses and to give each item of evidence such weight as appropriate. See In re Am. Acad. of Sci. Tech Ctr., 367 F.3d 1359, 1368 (Fed. Cir. 2004) (“[T]he Board is entitled to weigh the declarations and conclude that the lack of factual corroboration warrants discounting the opinions expressed in the declarations.”). In this case, we find that the published references on metabolites do not support the opinion. In re Am. Acad. of Sci. Tech Ctr., 367 F.3d at 1368 (“[T]he Board is entitled to weigh the declarations and conclude that the lack of factual corroboration warrants discounting the opinions expressed in the declarations.”) US-121, of which Dr. Pomper is lead inventor, also uses the term “low molecular weight”—without further characterization of the term—and is uninformative as to the meaning of the term. See Ex. 1006, ¶ 12. In addition, Patent Owner’s definition does not appear to apply to all compounds claimed in US-121.5” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “limited to Patent Owner’s proposed “from about 50 Daltons to about 1,500 Daltons.” The cited evidence relied on in the Pomper Declaration to define “low molecular weight” as a term well accepted in the chemical arts relates to metabolomics and metabolites. See Ex. 1002, 169, (specifically, ¶ 17 of Dr. Pomper’s declaration). Patent Owner admits that Dr. Pomper’s testimony is about molecules that differ from the claimed imaging and radiotherapeutic agents targeting FAP-α, but argues that the testimony is still relevant for purposes of explanation. Prelim Resp. 21. While it may be relevant, the testimony is not persuasive in light of the Specification. We find the uncontested fact that several of the B moieties alone—without the A moiety or L linker—specifically identified in the ’233 patent fall outside of Patent Owner’s proposed definition persuasive, as we normally do not interpret claim terms in a way that excludes examples disclosed in the specification. See, e.g., Verizon Servs. Corp. v. Vonage Holdings Corp., 503 F.3d 1295, 1305 (Fed. Cir. 2007) (rejecting proposed claim interpretation that would exclude disclosed examples in the specification). The cases cited by Patent Owner supporting that a claim term may be construed to exclude embodiments where the prosecution history supports such construction are factually distinguishable from the instant case as they regard instances of specific prosecution history disclaimer, clear prosecution disavowal, or relate to a specific definition of the terms in the Specification for the term being construed. Here, “low molecular weight” is not defined in the Specification, but, as Petitioner argues (see Pet. 21–25) is characterized as “demonstrat[ing] faster pharmacokinetics and a higher specific signal within clinically convenient times after administration” and that it “can be synthesized in radiolabeled form more easily.” Ex.1001, 13:33–50, 14:56– 16:14, 17:9–20. We are persuaded by the testimony of Dr. Zeglis, Petitioner’s declarant, that compounds weighing over 1500 Da may share those same behaviors, along with certain identified B moieties disclosed as embodiments. See Ex. 1003 ¶ 83.” slip op. at 10

  Claim construction§ 103 obviousness§ 112 disclosurecites KSR · Graham
  Patents in suitUS 12,115,233
• Apple Inc. v. Smith Interface Technologies, LLCSome claims unpatentable
  PTAB · Jan 8, 2026 · IPR2024-01091 · APJ Jameson Lee · IPR · Final written decision

  Claims 30 and 62 are unpatentable over the respective Kim and Burrough combinations; claims 1, 32, 34, and 64 were not shown unpatentable because the cited gestures lacked a common starting point.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The difference between the parties’ positions is solely that Petitioner includes “human-computer interaction” as a relevant degree and “human computer interfaces” as relevant working experience. We need not resolve that difference, because no matter which stated level of ordinary skill is applied, all of our findings and conclusions would be the same and because neither party asserts the other party’s expert is not qualified as an expert. In the Decision on Institution, we adopted Petitioner’s stated level of ordinary skill in the art. Inst. Dec. 10. We continue to adopt Petitioner’s stated level of ordinary skill in the art.3 C.” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “gesture” must refer back to the same gesture reflects the plain meaning of the claim language. In each independent claim, the structure and usage of the language in dispute are the same. Only one gesture detection is recited, and there is no language reasonably indicating repetition or reiteration of detection for any reason at any time. Patent Owner’s position that to meet “the gesture” recitations, prior art “gestures” must all share a common starting point also makes sense and is appropriate. The same gesture must start from the same starting point or else it is not the same gesture. Specifying the understanding this way avoids treating two similar gestures as the same gesture, if they have different starting points. For instance, two taps may be the same in every way, except for their starting points. They are not the same gesture in the context of these claims.” slip op. at 19

  • Expert testimonyOther

    “The difference between the parties’ positions is solely that Petitioner includes “human-computer interaction” as a relevant degree and “human computer interfaces” as relevant working experience. We need not resolve that difference, because no matter which stated level of ordinary skill is applied, all of our findings and conclusions would be the same and because neither party asserts the other party’s expert is not qualified as an expert. In the Decision on Institution, we adopted Petitioner’s stated level of ordinary skill in the art. Inst. Dec. 10. We continue to adopt Petitioner’s stated level of ordinary skill in the art.3 C.” slip op. at 11

  • BurdenNot shown unpatentable

    “Neither the tap-and-hold gesture in the bottom path of Kim’s Figure 7 nor the “long press input” and “long press event” of Kim such as that shown in Kim’s Figure 5 is the double-tap gesture Petitioner relies on to satisfy limitation [1.f]. Neither has been shown to have a common starting point with the double tap. Thus, Petitioner’s showing is inadequate. Limitation [1.i] recites: [1.i] when the magnitude of the duration of the gesture being detected on the touch screen on the object is greater than a second magnitude threshold, perform another operation. Pet. v. Petitioner explains: Kim teaches or renders [1.i] obvious. APPLE-1003, ¶62. Kim further describes “another operation” that is performed when the magnitude of the duration of the gesture is greater than a second magnitude threshold—specifically, a minimum threshold to be deemed an intentional touch. Specifically, Kim explains that, “[i]f detecting a user gesture, namely, if receiving an input event from a user through the touch screen, the mobile device determines the type of an input event.” APPLE-1004, [0053]. Kim states that, “[i]f an interrupt is not a request for the activation of the zoom mode as the result of determination in step 205, the mobile device can perform some action in connection with an interrupt (step 207),” shown in Figure 2a below. APPLE- 1004, [0050], FIG. 2a; APPLE-1003, ¶63. [Figure 2A of Kim is a flow diagram of a method for a touch-based control in a zoom mode (Ex. 1004 ¶ 20)] Kim additionally explains that if the mobile device determines that a detected user gesture does not correspond to any particular input event, “the mobile device disregards the received input event.” APPLE-1004, [0053]. Based on Kim’s disclosure of “disregarding” a received input, a POSITA would have understood that, for the detected interrupt (step 203) to be sufficient to cause the mobile device to “perform other action” (step 207), a magnitude greater than a minimum threshold value (e.g., the minimum threshold of an intentional user input) is relied upon, or rendered obvious, by Kim. APPLE-1004, FIG. 2a; APPLE-1003, ¶64. Thus, when the magnitude of the gesture is greater than a second magnitude threshold, the device “performs other action” (e.g., display requested menu). APPLE- 1004, [0050], FIG. 2a; APPLE-1003, ¶64. A POSITA would have understood that such an interrupt would be caused by a gesture that is longer in duration than the second threshold (as necessary to avoid the gesture from being disregarded), shorter than the duration necessary for a long press threshold, and a different gesture than a double tap gesture. APPLE-1003, ¶64. Pet. 24–26. As explained by Petitioner, the interrupt gesture relied on by” slip op. at 40

  Patent outcomesUS 10,936,114 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,936,114

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.