PTAB
Advanced fields
81 decisions · 287msnewest first
  • PTAB · Apr 15, 2026 · IPR2025-00187 · APJ Debra L Dennett · IPR · Final written decision

    Claims 1–17 are unpatentable under § 103, principally because Chang in view of Jin renders them obvious; the Jin/Feldmann grounds were not shown.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “Petitioner contends that a person of ordinary skill in the art would have been someone with an advanced degree involving the disciplines of electrical engineering, applied physics, chemistry, or materials science, and at least two years of experience designing, developing, or researching in the field. Alternatively, that person would have had a bachelor’s degree in electrical engineering, applied physics, or materials science, and at least three years of experience designing, developing, or researching in the field. Pet. 4 (citing Ex. 1003 ¶ 49).” slip op. at 10

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “Petitioner contends that “[n]o claim construction is believed to be necessary to resolve this Petition.” Pet. 24. Patent Owner does not address claim construction. See generally Resp.; Sur-reply. For purposes of this Decision, we need not expressly construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 11

    • Expert testimonyPatent owner expert creditedDecided for patent owner

      “gap-T isolation region would prevent shorting and that extending the tunnel oxide layer the edge “could trap impurities and create negative fixed oxide charges, which could then create a p-type inversion in the n-type base substrate, leading to a leakage path to the p-type emitter on the front of the solar cell” (Ex. 1003 ¶ 116 (emphasis added)) but are not convinced by his equivocal testimony. Notably too, neither Jin nor Feldmann discuss issues relating to trapped impurities and Petitioner, as well as Dr. Banerjee, fail to direct our attention to any record evidence to support their contentions. Rather, we are persuaded by Dr. Peckerar’s testimony that as a general rule in semiconductor process technology, a bare silicon surface should not be left unpassivated after processing. Elemental silicon is highly chemically reactive. As such, the bare surface is a “magnet” for defects and contamination. Leaving the tunnel oxide in place across the entire substrate backside would reduce this problem. Ex. 2001 ¶ 142. Dr. Peckerar further explains that a person of ordinary skill in the art would have known how to avoid shorting and leakage. In particular, he testifies that the manner by which charge is transported through a tunnel oxide can be controlled by adjusting manufacturing parameters such as time, temperature, thickness, and ambient impurities. A POSITA would plainly have adjusted these parameters to ensure that the tunnel oxide operates as intended (i.e., minimizes recombinant losses while transporting charge carriers to the backside of the solar cell) while avoiding undesirable leakage current. Because unwanted leakage charge can be avoided via other means during manufacture, there would have been no reason to reduce the physical extent of the tunnel oxide. Ex. 2001 ¶ 152 (referring to Ex. 2001 ¶¶ 149–151). Moreover, Dr. Peckerar testifies that “Dr. Banerjee also appears to be arguing that incorporation of impurities into the oxide will produce a MOSFET-like structure, with the contaminated oxide acting as a MOS gate leading to enhanced leakage,” but, for that to occur, “the source and drain areas would need to be of the same type.” Ex. 2001 ¶ 159. Here however, “the tunnel oxide layer is located between an n-type polysilicon layer and p-type frontside emitter layer” so “[n]o MOSFET-like structure can form because the source and drain are of different types.” Ex. 2001 ¶ 159. Neither Petitioner nor Dr. Banerjee address or dispute this testimony. See generally Reply; Ex. 1037. We credit Dr. Peckerar’s testimony in this regard. Without an apparent reason to modify the teachings of Jin and Feldmann to” slip op. at 19

    • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentableMotivation not foundNot shown unpatentable

      “On this complete trial record, we agree with Patent Owner. It is improper to base a conclusion of obviousness upon facts gleaned only through hindsight. “The invention must be viewed not after the blueprint has been drawn by the inventor, but as it would have been perceived in the state of the art that existed at the time the invention was made.” Sensonics, Inc. v. Aerosonic Corp., 81 F.3d 1566, 1570 (Fed. Cir. 1996) (citing Interconnect Planning Corp. v. Feil, 774 F.2d 1132, 1138 (Fed. Cir. 1985)). Therefore, “to establish a prima facie case of obviousness based on a combination of elements disclosed in the prior art, the [Petitioner] must articulate the basis on which it concludes that it would have been obvious to make the claimed invention.” Id. Impermissible hindsight is inferred when the specific understanding or principle within the knowledge of one of ordinary skill in the art that would motivate one (with no knowledge of the claimed invention) to make the proposed combination has not been explained. In re Rouffet, 149 F.3d 1350, 1358 (Fed. Cir. 1998).” slip op. at 17

    Patent outcomesUS 10,230,009 unpatentable
    Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 10,230,009
  • PTAB · Apr 15, 2026 · IPR2025-00006 · APJ Debra L Dennett · IPR · Final written decision

    Claims 1–17 are unpatentable under § 103, principally over Chang and Jin; the Board rejected the Jin and Feldmann combinations for lack of a reason to combine.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “In light of the record before us, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’009 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand the ’009 patent and the prior art.” slip op. at 10

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “Petitioner contends that “[n]o claim construction is believed to be necessary to resolve this Petition.” Pet. 24. Patent Owner does not address claim construction. See generally Resp.; Sur-reply. For purposes of this Decision, we need not expressly construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 11

    • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentableMotivation not foundNot shown unpatentable

      “However, Petitioner proposes to remove the tunnel oxide layer from the edge and offers little explanation of why the skilled artisan would apply Jin’s gap- T isolation region to both of Feldmann’s polysilicon and tunnel oxide layers. As noted above, Petitioner states that the skilled artisan would have included Jin’s gap-T isolation region in order to prevent shorting. Pet. 26. Petitioner’s reasoning is questionable—supported only by the conclusory testimony of Dr. Banerjee. Dr. Banerjee’s testimony offers no more evidentiary support than provided in the Petition. Compare Ex. 1003 ¶ 116 with Pet. 26). Petitioner cannot satisfy its burden of proving obviousness by employing “mere conclusory statements.” See Magnum, 829 F.3d at 1380. We acknowledge Dr. Banerjee’s testimony that the combination of Jin’s gap-T isolation region would prevent shorting and that extending the tunnel oxide layer the edge “could trap impurities and create negative fixed oxide charges, which could then create a p-type inversion in the n-type base substrate, leading to a leakage path to the p-type emitter on the front of the solar cell” (Ex. 1003 ¶ 116 (emphasis added)) but are not convinced by his equivocal testimony. Notably too, neither Jin nor Feldmann discuss issues relating to trapped impurities and Petitioner, as well as Dr. Banerjee, fail to direct our attention to any record evidence to support their contentions. Rather, we are persuaded by Dr. Peckerar’s testimony that as a general rule in semiconductor process technology, a bare silicon surface should not be left unpassivated after processing. Elemental silicon is highly chemically reactive. As such, the bare surface is a “magnet” for defects and contamination. Leaving the tunnel oxide in place across the entire substrate backside would reduce this problem. Ex. 2001 ¶ 142. Dr. Peckerar further explains that a person of ordinary skill in the art would have known how to avoid shorting and leakage. In particular, he testifies that the manner by which charge is transported through a tunnel oxide can be controlled by adjusting manufacturing parameters such as time, temperature, thickness, and ambient impurities. A POSITA would plainly have adjusted these parameters to ensure that the tunnel oxide operates as intended (i.e., minimizes recombinant losses while transporting charge carriers to the backside of the solar cell) while avoiding undesirable leakage current. Because unwanted leakage charge can be avoided via other means during manufacture, there would have been no reason to reduce the physical extent of the tunnel oxide. Ex. 2001 ¶ 152 (referring to Ex. 2001 ¶¶ 149–151). Moreover, Dr. Peckerar testifies that “Dr. Banerjee also appears to be arguing that incorporation of impurities into the oxide will produce a MOSFET-like structure, with the contaminated oxide acting as a MOS gate leading to enhanced leakage,” but, for that to occur, “the source and drain areas would need to be of the same type.” Ex. 2001 ¶ 159. Here however, “the tunnel oxide layer is located between an n-type polysilicon layer and p-type frontside emitter layer” so “[n]o MOSFET-like structure can form because the source and drain are of different types.” Ex. 2001 ¶ 159. Neither Petitioner nor Dr. Banerjee address or dispute this testimony. See generally Reply; Ex. 1037. We credit Dr. Peckerar’s testimony in this regard.” slip op. at 19

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable

      “configuration in which the emitter area and back surface field area are not adjacent to each other, thus eliminating “the necessity of performing an isolation process when the emitter area [] and the back surface field are [] are formed to be adjacent to each other.” Resp. 42 (citing Ex. 1013 ¶ 76). In so doing, Patent Owner side steps Chang’s unambiguous definition that “‘entirely formed’ means that an element such as a layer is formed over an entire surface without an empty area or a non-coverage area, or is formed over an entire area excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like.” Ex. 1013 ¶¶ 45, 51, 56, 62 (emphasis added). Chang discloses that a first tunneling layer, a first portion of an emitter area, a second tunneling layer, and a back surface field area may each be “formed over an entire area excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like.” Id. Chang’s definition of “entirely formed” (“excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like”) implies use of a mask. See Chang ¶ 62; Tr. 15:20–17:11. Dr. Banerjee testifies that the need to electrically isolate the emitter region from the back surface field was well known in the field, and both Chang and Jin teach backside isolation regions. Ex. 1003 ¶¶ 73, 217 (citing Ex. 1023 § 1). Chang also discloses that the emitter area may be formed by thermal diffusion, ion implantation or the like. Ex. 1013 ¶ 98. Petitioner persuasively argues that Chang’s disclosure of thermal diffusion of the emitter layer would result in dopants diffused into not only the top surface of the substrate, but also the exposed lateral surfaces, a problem also noted in Jin. See Pet. 11–12; Reply 6–7; Ex. 1003 ¶ 71; Ex. 1009 ¶¶ 57–58. Jin discloses avoiding shorting of the emitter layer and back surface field layer by edge isolation on the back surface field layer using a mask to create a “gap-T.” Ex. 1009 ¶¶ 57–58, 83. Chang discloses excluding a tunneling layer and a base surface field area from periphery region and isolation region. Ex. 1013 ¶¶ 56, 62. Using a mask, as implied in Chang and explicitly disclosed in Jin, would “pre-designate” and/or “inevitably form” the regions where the tunneling layer and back surface field area are excluded. We credit Dr. Banerjee’s testimony that one of ordinary skill in the art reviewing Chang would therefore understand the importance of implementing the isolation region in Chang’s device, and would therefore be motivated to look to other references, such as Jin (which was assigned to the same original assignee as Chang, LG Electronics, EX1009-Jin, face; EX1013-Chang, face) to understand details regarding Chang’s isolation region.” slip op. at 32

    Patent outcomesUS 10,230,009 unpatentable
    Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 10,230,009
  • PTAB · Apr 15, 2026 · IPR2025-00918 · APJ Avelyn M Ross · IPR · Final written decision

    Claims 1–11 are unpatentable under § 103 over Chang and Jin; the Board rejected the Jin and Feldmann based grounds for lack of a reason to combine without hindsight.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “Petitioner contends that a person of ordinary skill in the art would have been someone with an advanced degree involving the disciplines of electrical engineering, applied physics, chemistry, or materials science, and at least two years of experience designing, developing, or researching in the field. Alternatively, that person would have had a bachelor’s degree in electrical engineering, applied physics, or materials science, and at least three years of experience designing, developing, or researching in the field.” slip op. at 9

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “Petitioner contends that “[n]o claim construction is believed to be necessary to resolve this Petition.” Pet. 23. And, Patent Owner does not address claim construction. See generally PO Resp. As neither party proposes an express construction for our consideration and because we determine that an express claim construction is not necessary for us to render a decision in this matter, we do not construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 10

    • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentableMotivation not foundNot shown unpatentable

      “base a conclusion of obviousness upon facts gleaned only through hindsight. “The invention must be viewed not after the blueprint has been drawn by the inventor, but as it would have been perceived in the state of the art that existed at the time the invention was made.” Sensonics, Inc. v. Aerosonic Corp., 81 F.3d 1566, 1570 (Fed. Cir. 1996) (citing Interconnect Planning Corp. v. Feil, 774 F.2d 1132, 1138 (Fed. Cir. 1985)). Therefore, “to establish a prima facie case of obviousness based on a combination of elements disclosed in the prior art, the [Petitioner] must articulate the basis on which it concludes that it would have been obvious to make the claimed invention.” Id. Impermissible hindsight is inferred when the specific understanding or principle within the knowledge of one of ordinary skill in the art that would motivate one (with no knowledge of the claimed invention) to make the proposed combination has not been explained. In re Rouffet, 149 F.3d 1350, 1358 (Fed. Cir. 1998).” slip op. at 16

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable

      “Patent Owner focuses on Chang’s description in paragraph 76 of a single configuration in which the emitter area and back surface field area are not adjacent to each other, thus eliminating “the necessity of performing an isolation process when the emitter area [] and the back surface field are [] are formed to be adjacent to each other.” PO Resp. 42–43 (citing Ex. 1013 ¶ 76). But, in so doing, Patent Owner side steps Chang’s unambiguous definition that “‘entirely formed’ means that an element such as a layer is formed over an entire surface without an empty area or a non-coverage area, or is formed over an entire area excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like.” Ex. 1013 ¶¶ 45, 51, 56, 62 (emphasis added). Chang discloses that a first tunneling layer, a first portion of an emitter area, a second tunneling layer, and a back surface field area may each be “formed over an entire area excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like.” Ex. 1013 ¶¶ 45, 51, 56, 62. Chang’s definition of “entirely formed” (“excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like”) implies use of a mask. See Ex. 1013 ¶ 62; Tr. 15:20– 17:11. Dr. Banerjee testifies that the need to electrically isolate the emitter region from the back surface field was well known in the field, and both Chang and Jin teach backside isolation regions. Ex. 1003 ¶¶ 70–81, 91–96, 200 (citing Ex. 1026 § 1 and stating that “[b]oth Chang and Jin likewise teach backside isolation regions”). Chang also discloses that the emitter area may be formed by “thermal diffusion, ion implantation or the like.” Ex. 1013 ¶ 98. Petitioner persuasively argues that Chang’s disclosure of thermal diffusion of the emitter layer would result in dopants diffused into not only the top surface of the substrate, but also the exposed lateral surfaces, a problem also noted in Jin. See Pet. 11–12; Pet. Reply 6–7; Ex. 1003 ¶ 71; Ex. 1009 ¶¶ 57–58. Jin discloses avoiding shorting of the emitter layer and back surface field layer by edge isolation on the back surface field layer using a mask to create a “gap-T.” Ex. 1009 ¶¶ 57–58, 83. Chang discloses excluding the second tunneling layer and a base surface field area from periphery region and isolation portion. Ex. 1013 ¶¶ 56, 62. Using a mask, as implied in Chang and explicitly disclosed in Jin, would “pre-designate” and/or “inevitably form” the regions where the tunneling layer and back surface field area are excluded. We credit Dr. Banerjee’s testimony that one of ordinary skill in the art “reviewing Chang would therefore understand the importance of implementing the isolation region in Chang’s device, and would therefore be motivated to look to other references, such as Jin (which was assigned to the same original assignee as Chang, LG Electronics, EX1009-Jin, face; EX1013-Chang, face) to understand details regarding Chang’s isolation region.” Ex. 1003 ¶ 201.” slip op. at 33

    Patent outcomesUS 9,722,104 unpatentable
    Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 9,722,104
  • PTAB · Apr 15, 2026 · IPR2025-00186 · APJ Avelyn M Ross · IPR · Final written decision

    Claims 1–11 are unpatentable under § 103 over Chang and Jin; the Board found the combination disclosed the claimed isolation portion and supported the challenged claims.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “Petitioner contends that a person of ordinary skill in the art would have been someone with an advanced degree involving the disciplines of electrical engineering, applied physics, chemistry, or materials science, and at least two years of experience designing, developing, or researching in the field. Alternatively, that person would have had a bachelor’s degree in electrical engineering, applied physics, or materials science, and at least three years of experience designing, developing, or researching in the field. Pet. 4 (citing Ex. 1003 ¶ 49). Patent Owner does not address the level of ordinary skill in the art. See generally PO Resp; Sur-reply. In light of the complete trial record before us, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’104 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand the ’104 patent and the prior art.” slip op. at 9

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

      “C. Claim Construction We construe claim terms according to the standard set forth in Phillips v. AWH Corp., 415 F.3d 1303, 1312–17 (Fed. Cir. 2005) (en banc); 37 C.F.R. § 42.100(b). Under Phillips, we give claim terms “their ordinary and customary meaning.” Phillips, 415 F.3d at 1312. “[T]he ordinary and customary meaning of a claim term is the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention.” Id. at 1313. “Importantly, the person of ordinary skill in the art is deemed to read the claim term not only in the context of the particular claim in which the disputed term appears, but in the context of the entire patent, including the specification.” Id. Petitioner contends that “[n]o claim construction is believed to be necessary to resolve this Petition.” Pet. 23. And, Patent Owner does not address claim construction. See generally PO Resp. As neither party proposes an express construction for our consideration and because we determine that an express claim construction is not necessary for us to render a decision in this matter, we do not construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 10

    • Expert testimonyPetitioner expert discountedPatent owner expert creditedMixed

      “edge and offers little explanation of why the skilled artisan would apply Jin’s gap- T isolation region to both of Feldmann’s polysilicon and tunnel oxide layers. As noted above, Petitioner states that the skilled artisan would have included Jin’s gap-T isolation region in order to prevent shorting. Pet. 25. Petitioner’s reasoning is questionable—supported only by the conclusory testimony of Dr. Banerjee. Dr. Banerjee’s testimony offers no more evidentiary support than provided in the Petition. Compare Ex. 1003 ¶ 113, with Pet. 25. Petitioner cannot satisfy its burden of proving obviousness by employing “mere conclusory statements.” Magnum Oil, 829 F.3d at 1380. We acknowledge Dr. Banerjee’s testimony that the combination of Jin’s gap-T isolation region would prevent shorting and that extending the tunnel oxide layer the edge “could trap impurities and create negative fixed oxide charges, which could then create a p-type inversion in the n-type base substrate, leading to a leakage path to the p-type emitter on the front of the solar cell” (Ex. 1003 ¶ 113 (emphasis added)) but are not convinced by his equivocal testimony. Notably too, neither Jin nor Feldmann discuss issues relating to trapped impurities and Petitioner, as well as Dr. Banerjee, fail to direct our attention to any record evidence to support their contentions. Rather, we are persuaded by Dr. Peckerar’s testimony that as a general rule in semiconductor process technology, a bare silicon surface should not be left unpassivated after processing. Elemental silicon is highly chemically reactive. As such, the bare surface is a “magnet” for defects and contamination. Leaving the tunnel oxide in place across the entire substrate backside would reduce this problem. Ex. 2001 ¶ 142. Dr. Peckerar further explains that a person of ordinary skill in the art would have known how to avoid shorting and leakage. In particular, he testifies that the manner by which charge is transported through a tunnel oxide can be controlled by adjusting manufacturing parameters such as time, temperature, thickness, and ambient impurities. A POSITA would plainly have adjusted these parameters to ensure that the tunnel oxide operates as intended (i.e., minimizes recombinant losses while transporting charge carriers to the backside of the solar cell) while avoiding undesirable leakage current. Because unwanted leakage charge can be avoided via other means during manufacture, there would have been no reason to reduce the physical extent of the tunnel oxide. Ex. 2001 ¶ 152 (referring to Ex. 2001 ¶¶ 149–151). Moreover, Dr. Peckerar testifies that “Dr. Banerjee also appears to be arguing that incorporation of impurities into the oxide will produce a MOSFET-like structure, with the contaminated oxide acting as a MOS gate leading to enhanced leakage,” but, for that to occur, “the source and drain areas would need to be of the same type.” Ex. 2001 ¶ 159. Here however, “the tunnel oxide layer is located between an n-type polysilicon layer and p-type frontside emitter layer” so “[n]o MOSFET-like structure can form because the source and drain are of different types.” Ex. 2001” slip op. at 18

    • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentableMotivation not foundNot shown unpatentable

      “base a conclusion of obviousness upon facts gleaned only through hindsight. “The invention must be viewed not after the blueprint has been drawn by the inventor, but as it would have been perceived in the state of the art that existed at the time the invention was made.” Sensonics, Inc. v. Aerosonic Corp., 81 F.3d 1566, 1570 (Fed. Cir. 1996) (citing Interconnect Planning Corp. v. Feil, 774 F.2d 1132, 1138 (Fed. Cir. 1985)). Therefore, “to establish a prima facie case of obviousness based on a combination of elements disclosed in the prior art, the [Petitioner] must articulate the basis on which it concludes that it would have been obvious to make the claimed invention.” Id. Impermissible hindsight is inferred when the specific understanding or principle within the knowledge of one of ordinary skill in the art that would motivate one (with no knowledge of the claimed invention) to make the proposed combination has not been explained. In re Rouffet, 149 F.3d 1350, 1358 (Fed. Cir. 1998).” slip op. at 16

    Patent outcomesUS 9,722,104 unpatentable
    Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 9,722,104
  • PTAB · Apr 15, 2026 · IPR2025-00007 · APJ Avelyn M Ross · IPR · Final written decision

    Claims 1–11 are unpatentable under §103 over Chang and Jin because the combination teaches the claimed isolation portion and the claimed tapering.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedOther

      “Petitioner contends that a person of ordinary skill in the art would have been someone with an advanced degree involving the disciplines of electrical engineering, applied physics, chemistry, or materials science, and at least two years of experience designing, developing, or researching in the field. Alternatively, that person would have had a bachelor’s degree in electrical engineering, applied physics, or materials science, and at least three years of experience designing, developing, or researching in the field. Pet. 4 (citing Ex. 1003 ¶ 49). Patent Owner does not address the level of ordinary skill in the art. See generally PO Resp; Sur-reply. In light of the complete trial record before us, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’104 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand the ’104 patent and the prior art.” slip op. at 9

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “Petitioner contends that “[n]o claim construction is believed to be necessary to resolve this Petition.” Pet. 23. And, Patent Owner does not address claim construction. See generally PO Resp. As neither party proposes an express construction for our consideration and because we determine that an express claim construction is not necessary for us to render a decision in this matter, we do not construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 10

    • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightTeaching away not foundNot shown unpatentable

      “On this complete trial record, we agree with Patent Owner. It is improper to base a conclusion of obviousness upon facts gleaned only through hindsight. “The invention must be viewed not after the blueprint has been drawn by the inventor, but as it would have been perceived in the state of the art that existed at the time the invention was made.” Sensonics, Inc. v. Aerosonic Corp., 81 F.3d 1566, 1570 (Fed. Cir. 1996) (citing Interconnect Planning Corp. v. Feil, 774 F.2d 1132, 1138 (Fed. Cir. 1985)). Therefore, “to establish a prima facie case of obviousness based on a combination of elements disclosed in the prior art, the [Petitioner] must articulate the basis on which it concludes that it would have been obvious to make the claimed invention.” Id. Impermissible hindsight is inferred when the specific understanding or principle within the knowledge of one of ordinary skill in the art that would motivate one (with no knowledge of the claimed invention) to make the proposed combination has not been explained. In re Rouffet, 149 F.3d 1350, 1358 (Fed. Cir. 1998).” slip op. at 16

    • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

      “However, Petitioner proposes to remove the tunnel oxide layer from the edge and offers little explanation of why the skilled artisan would apply Jin’s gap- T isolation region to both of Feldmann’s polysilicon and tunnel oxide layers. As noted above, Petitioner states that the skilled artisan would have included Jin’s gap-T isolation region in order to prevent shorting. Pet. 25. Petitioner’s reasoning is questionable—supported only by the conclusory testimony of Dr. Banerjee. Dr. Banerjee’s testimony offers no more evidentiary support than provided in the Petition. Compare Ex. 1003 ¶ 113, with Pet. 25. Petitioner cannot satisfy its burden of proving obviousness by employing “mere conclusory statements.” Magnum Oil, 829 F.3d at 1380. We acknowledge Dr. Banerjee’s testimony that the combination of Jin’s gap-T isolation region would prevent shorting and that extending the tunnel oxide layer the edge “could trap impurities and create negative fixed oxide charges, which could then create a p-type inversion in the n-type base substrate, leading to a leakage path to the p-type emitter on the front of the solar cell” (Ex. 1003 ¶ 113 (emphasis added)) but are not convinced by his equivocal testimony. Notably too, neither Jin nor Feldmann discuss issues relating to trapped impurities and Petitioner, as well as Dr. Banerjee, fail to direct our attention to any record evidence to support their contentions. Rather, we are persuaded by Dr. Peckerar’s testimony that as a general rule in semiconductor process technology, a bare silicon surface should not be left unpassivated after processing. Elemental silicon is highly chemically reactive. As such, the bare surface is a “magnet” for defects and contamination. Leaving the tunnel oxide in place across the entire substrate backside would reduce this problem. Ex. 2001 ¶ 142. Dr. Peckerar further explains that a person of ordinary skill in the art would have known how to avoid shorting and leakage. In particular, he testifies that the manner by which charge is transported through a tunnel oxide can be controlled by adjusting manufacturing parameters such as time, temperature, thickness, and ambient impurities. A POSITA would plainly have adjusted these parameters to ensure that the tunnel oxide operates as intended (i.e., minimizes recombinant losses while transporting charge carriers to the backside of the solar cell) while avoiding undesirable leakage current. Because unwanted leakage charge can be avoided via other means during manufacture, there would have been no reason to reduce the physical extent of the tunnel oxide.” slip op. at 18

    Patent outcomesUS 9,722,104 unpatentable
    Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 9,722,104
  • PTAB · Jan 14, 2026 · PGR2025-00059 · APJ Devon Zastrow Newman · PGR · Institution

    The Board instituted post-grant review of claims 1–4 on all four asserted grounds, finding a sufficient preliminary showing of obviousness and lack of enablement.

    RulingsInstitution decision
    • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

      “V. CONCLUSION Petitioner has, at this stage, established that it will more likely than not prevail in showing that at least one of the challenged claims is unpatentable. This determination is, however, based on a preliminary record and is not final on any issues of patentability. We will make a final determination on the patentability of the challenged claims, as necessary and applying the preponderance of the evidence standard, based on a fully developed record through trial. VI. ORDER In consideration of the foregoing, it is hereby: ORDERED that, pursuant to 35 U.S.C. § 324(a) post grant review of claims 1–4 of the ’233 patent is hereby instituted on the grounds set forth in the Petition, commencing on the entry date of this Order, and pursuant to 35 U.S.C. § 324(d) and 37 C.F.R. § 42.4, notice is hereby given of the institution of a trial; and” slip op. at 40

    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “Patent Owner does not proffer a description of a POSA. See generally, Prelim. Resp. For the purposes of this decision, on the record at this time, we find that Petitioner’s definition appears consistent with the level of skill shown in the prior art references of record, and apply it herein. See Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007). We invite the parties to further address the definition of a POSA during trial should they find it necessary.” slip op. at 7

    • Expert testimonyPetitioner expert discountedDecided for patent owner

      “In addition, the opinion stated in the Pomper Declaration that “the term of ‘low molecular weight’ is well accepted in the chemical arts” and the declarant “recognize[s] that low molecular weight compounds would have a molecular weight of typically from about 50 Daltons to about 1,500 Daltons” is offered by a co-inventor. We, as factfinder, have discretion to weigh the credibility of expert witnesses and to give each item of evidence such weight as appropriate. See In re Am. Acad. of Sci. Tech Ctr., 367 F.3d 1359, 1368 (Fed. Cir. 2004) (“[T]he Board is entitled to weigh the declarations and conclude that the lack of factual corroboration warrants discounting the opinions expressed in the declarations.”). In this case, we find that the published references on metabolites do not support the opinion. In re Am. Acad. of Sci. Tech Ctr., 367 F.3d at 1368 (“[T]he Board is entitled to weigh the declarations and conclude that the lack of factual corroboration warrants discounting the opinions expressed in the declarations.”) US-121, of which Dr. Pomper is lead inventor, also uses the term “low molecular weight”—without further characterization of the term—and is uninformative as to the meaning of the term. See Ex. 1006, ¶ 12. In addition, Patent Owner’s definition does not appear to apply to all compounds claimed in US-121.5” slip op. at 11

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

      “limited to Patent Owner’s proposed “from about 50 Daltons to about 1,500 Daltons.” The cited evidence relied on in the Pomper Declaration to define “low molecular weight” as a term well accepted in the chemical arts relates to metabolomics and metabolites. See Ex. 1002, 169, (specifically, ¶ 17 of Dr. Pomper’s declaration). Patent Owner admits that Dr. Pomper’s testimony is about molecules that differ from the claimed imaging and radiotherapeutic agents targeting FAP-α, but argues that the testimony is still relevant for purposes of explanation. Prelim Resp. 21. While it may be relevant, the testimony is not persuasive in light of the Specification. We find the uncontested fact that several of the B moieties alone—without the A moiety or L linker—specifically identified in the ’233 patent fall outside of Patent Owner’s proposed definition persuasive, as we normally do not interpret claim terms in a way that excludes examples disclosed in the specification. See, e.g., Verizon Servs. Corp. v. Vonage Holdings Corp., 503 F.3d 1295, 1305 (Fed. Cir. 2007) (rejecting proposed claim interpretation that would exclude disclosed examples in the specification). The cases cited by Patent Owner supporting that a claim term may be construed to exclude embodiments where the prosecution history supports such construction are factually distinguishable from the instant case as they regard instances of specific prosecution history disclaimer, clear prosecution disavowal, or relate to a specific definition of the terms in the Specification for the term being construed. Here, “low molecular weight” is not defined in the Specification, but, as Petitioner argues (see Pet. 21–25) is characterized as “demonstrat[ing] faster pharmacokinetics and a higher specific signal within clinically convenient times after administration” and that it “can be synthesized in radiolabeled form more easily.” Ex.1001, 13:33–50, 14:56– 16:14, 17:9–20. We are persuaded by the testimony of Dr. Zeglis, Petitioner’s declarant, that compounds weighing over 1500 Da may share those same behaviors, along with certain identified B moieties disclosed as embodiments. See Ex. 1003 ¶ 83.” slip op. at 10

    Claim construction§ 103 obviousness§ 112 disclosurecites KSR · Graham
    Patents in suitUS 12,115,233
  • PTAB · Dec 1, 2025 · PGR2025-00045 · APJ Debra L Dennett · PGR · Institution

    The Board denied institution because Petitioner did not show it was more likely than not that any challenged claim was unpatentable under the asserted grounds.

    RulingsInstitution decision
    • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

      “We have authority to determine whether to institute a post-grant review under 35 U.S.C. § 324. Institution of a post-grant review is authorized by statute only when “the information presented in the petition . . . would demonstrate that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” 35 U.S.C. § 324(a). The burden is on Petitioner to show that the challenged patent is eligible for postgrant review. Mylan Pharms. Inc. v. Yeda Research & Dev. Co., PGR2016- 00010, Paper 9 at 10 (PTAB Aug. 15, 2016) (holding that the ultimate burden of persuasion remains with a petitioner to demonstrate that the challenged patent is eligible for post-grant review). Upon consideration of the Petition, Preliminary Response, and the cited evidence, we determine that Petitioner has not shown that it is more likely than not that any of the challenged claims are unpatentable. We thus determine to not institute a post-grant review of the ’027 patent based on the Petition.” slip op. at 2

    • Skill levelSkill level petitioner adoptedOther

      “a Bachelor of Science degree in Agricultural or Mechanical Engineering with 2–4 years of practical, applied experience in the field of agricultural machinery, including systems integration and fluid handling and sprayer control systems, or equivalent experience. Prelim. Resp. 12 (citing Ex. 2001, ¶ 59). Patent Owner states that the differences in the asserted levels of ordinary skill should not change the outcome of the Petition. Id. For the purposes of this decision, we adopt Petitioner’s definition, which appears consistent with the level of skill shown in the prior art references of record and the ’027 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))). Our analysis, however, would not change were we to adopt Patent Owner’s definition.” slip op. at 7

    • Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed board ownDecided for patent owner

      “Patent Owner contends that claim construction is necessary for the “seed-applied substance” term because Petitioner allegedly ignores the teaching of the specification in evaluating the term. Prelim. Resp. 12. Patent Owner points to the specification, which defines a “seed-applied substance” as “includ[ing] any composition applied to seeds prior to the seeds being planted (e.g., when the seed comes in contact with the soil in a field).” Id. at 13 (quoting Ex. 1001, 7:45-48). Patent Owner contends that the term means “a substance that is applied directly to the seed before the seed comes into contact with the soil in a field.” Id. (citing Ex. 2001, ¶ 55). According to Patent Owner, Petitioner erroneously uses a definition that “allows the ‘seedapplied substance’ to be applied to the seed (and soil) as the seed lay planted in the soil.’” Id. For the purpose of addressing Petitioner’s grounds, we use the definition of “seed-applied substance” provided in the ’027 patent, i.e., “any composition applied to seeds prior to the seeds being planted (e.g., when the seed comes in contact with the soil in a field).” Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996) (“[A] patentee may choose to be his own lexicographer and use terms in a manner other than their ordinary meaning, as long as the special definition of the term is clearly stated in the patent specification or file history.”).” slip op. at 7

    • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

      “3. Analysis Our analysis of whether Wagers discloses the limitation “individually applying the desired application amount of the selected type of the seed-applied substance to each seed as it is being delivered to the soil” is dispositive of Petitioner’s challenge to claim 1 as anticipated.” slip op. at 10

    Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Graham
    Patents in suitUS 12,102,027
  • PTAB · Nov 17, 2025 · IPR2024-00648 · APJ Devon Zastrow Newman · IPR · Final written decision

    Claims 1–30 are unpatentable: claims 1–2, 4–7, 9–12, 14–17, and 19–30 are anticipated by the MSI-H Study Record; claims 3, 8, 13, and 18 are obvious over the cited combinations.

    RulingsFinal written decision
    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

      “We agree with Patent Owner that the phrase “in response to” in claim 1 requires a causal relationship wherein the patient must be tested for MSI-H and, if he or she is determined to be MSI-H or dMMR, then the patient is treated with 10 mg/kg of pembrolizumab every 14 days. In claim 1, a biological sample from the patient must be tested to determine if the cancer is MSI-H and, if so, the patient is treated with a therapeutically effective amount of pembrolizumab. For this reason, if the prior art teaches the limitations of 1) testing a biological sample obtained from a patient having cancer to determine that the patient’s cancer is microsatellite instability high or mismatch repair deficient, and 2) treating the patient with a therapeutically effective amount of pembrolizumab if the patient’s cancer is determined to be microsatellite instability high or DNA mismatch repair deficient, the art anticipates claim 1. We are not persuaded that claim 1 requires or excludes anything else because nothing else is recited in the claim.” slip op. at 10

    • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityReference is prior artDecided for petitioner

      “Patent Owner does not direct us to evidence that it attempted to file any patent application before the publication date of the MSI-H clinical study and was denied an earlier filing date. Contrary to Patent Owner’s argument that it could not file a patent application without results from the MSI-H clinical study, we note that the inventors filed a provisional patent application on November 13, 2014, which, although also filed more than a year after the publication of the MSI-H clinical study, disclosed no clinical results or data. Ex. 1001, cover; Ex. 1030, 1. After considering the parties’ arguments, we are not persuaded by Patent Owner’s assertion that the inventors could not have filed an earlier application to at least attempt to secure a priority date before the MSI-H clinical study was publicly available. an earlier filing date. Instead, we are persuaded by Petitioner’s argument that because the MSI-H clinical study was published before the inventors filed an application to protect their patent rights the MSI-H clinical study is prior art for the information it discloses. Accordingly, we proceed to analyze Petitioner’s contentions in Ground 1.” slip op. at 24

    • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

      “the genus disclosed in the MSI Study Record and does not argue or provide evidence to show that one of ordinary skill in the art could have envisaged each species within that genus. PO Resp. 11–14. We are not persuaded that either the size of the genus in the MSI Study Record or whether one of ordinary skill in the art would have been able to envisage every species within it is dispositive of whether the MSI Study Record anticipates claim 1, where one of ordinary skill in the art would have known that specific cancers recited in claim 1 would be included in the MSI Study Record. As Petitioner argues, claim 1 requires that “a patient…selected from the group consisting of [the listed cancers]” be tested and treated. Pet. Reply 10 (emphasis original). Claim 1 does not require that the patient have each and every one of the sixteen listed cancers to anticipate the claim. Rather, claim 1 requires testing a sample from “a patient” with one of the recited types of cancer and treating the patient. See Brown v. 3M, 265 F.3d 1349, 1351 (Fed. Cir. 2001) (“When a claim covers several structures or compositions, either generically or as alternatives, the claim is deemed anticipated if any of the structures or compositions within the scope of the claim is known in the prior art.”).” slip op. at 31

    • Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner

      “In contrast, the testimony of Patent Owner’s witness, Dr. Goldberg, supports Petitioner’s argument of the knowledge in the art at the time, wherein Dr. Goldberg testifies that “[w]hile many clinical oncologists were aware that patients with Lynch Syndrome had a defect in DNA mismatch repair, they associated MSI testing with young onset colorectal and endometrial cancer and patients with a family history of colorectal and/or endometrial cancer.” Ex. 2090 ¶ 79. Similarly, during his deposition, Dr. Goldberg also agreed that endometrial, gastric, and small-bowel cancers would come to mind when he saw a reference to MSI-high non-colorectal cancer. See Ex. 1243, 115:5–116:22 (Q. And so does endometrial cancer come to mind when you see reference to MSI-high non-colorectal cancers? . . . A. Yes. Q. As . . . a person of skill in the field, when you see reference to MSI-high non-colorectal cancers, does gastric cancer come to mind? . . . A. comes to mind. So the answer is yes. Q. As a person of skill in the field, when you see reference to MSI-high non-colorectal cancers, does small bowel cancer come to mind? . . . A. Yes.”). Patent Owner does not direct us to other evidence contradicting Petitioner’s argument that MSI-H was known to occur in endometrial, small bowel, and gastric cancer. Pet. 18.” slip op. at 30

    Patent outcomesUS 11,643,462 unpatentable
    Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
    Patents in suitUS 11,643,462
  • PTAB · Nov 4, 2025 · IPR2024-00624 · APJ Sheridan K Snedden · IPR · Final written decision

    Claims 1–4, 6–10, and 12–15 are unpatentable, principally because the MSI-H Study Record anticipates them.

    RulingsFinal written decision
    • Skill levelSkill level board ownDecided for petitioner

      “Pet. 12 (citing Ex. 1003 ¶ 19). To Patent Owner, the ordinarily skilled artisan would have had a medical or graduate-level degree, or equivalent work experience, in the fields of immunology, genetics, or a related field and would have experience (i) conducting immunology research relating to oncology, (ii) conducting genetics research relating to oncology, or (iii) developing and conducting clinical trials on novel cancer therapies in those fields. PO Resp. 6 (citing Ex. 2072 ¶¶ 31–32, 86–94). Thus, Petitioner and Patent Owner characterize one of ordinary skill in the art differently. Petitioner emphasizes medical and treatment aspects in its characterization of an ordinarily skilled artisan, whereas Patent Owner emphasizes research aspects.” slip op. at 8

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “The parties do not assert constructions of any terms recited in the challenged claims other than that their ordinary and customary meanings should apply. Pet. 11–12; PO Resp. 6. We determine that no express construction of any claim term is necessary to resolve the dispute between the parties. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). We construe” slip op. at 7

    • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

      “record, we are persuaded that the results recited in claim 1 would follow from the steps taught in the MSR, for the reasons and based on the evidence Petitioner cites above. For these same reasons, we are unpersuaded by Patent Owner’s argument that it was unknown whether the amount of pembrolizumab recited in claim 1 would be effective in producing an improved outcome compared to a reference patient without a tumor that was not MSI-H or dMMR, and Patent Owner does not dispute that the amount of pembrolizumab disclosed in the MSR (10 mg/kg every 14 days; see Ex. 1005, 4) is the same as the amount provided in the ’975 patent as being effective (10 mg/kg every 14 days; Ex. 1001, 8:48–52, 13:50–52). Regardless of the inventors’ intent in publishing the MSR as a Stage II clinical trial on the www.clinicaltrials.gov website, as discussed above, we determine that the MSR teaches selecting a patient with a metastatic MSI-H or dMMR tumor and administering an amount of pembrolizumab that would be effective. See, e.g., Ex. 1005, 4 (Arms and Interventions). The result of drug treatment inherently follows its administration. The MSR does not merely suggest that pembrolizumab may be useful in some unidentified subset of patients or suggest that some unidentified drug may be useful for MSI-H cancer patients. Instead, the MSR discloses selecting a patient with a condition recited in claim 1 and treating with the drug at the amount recited in claim 1. Contra Metabolite Labs. Inc. v. Lab. Corp. of Am. Holdings, 370 F.3d 1354, 1367 (Fed. Cir. 2004) (holding that the prior art did not inherently anticipate where it failed to mention specific vitamin deficiencies, instead merely inviting further experimentation to find associations with metabolic perturbations). requirement, efficacy is inherent in carrying out the claim steps,” referring to a claimed method of treating or preventing stroke, which was held to be anticipated by the publication of a proposed study. 677 F.3d at 1381. Patent Owner attempts to distinguish the size and apparent surety of the study in Montgomery from the MSR. PO Resp. 15. But because we find that the MSR teaches performing the steps recited in claim 1 for the purpose of determining and treating MSI-H cancer, we are persuaded that the MSR inherently discloses the results of selection of patients and administration of the drug treatment recited in those steps. See Bristol-Myers, 246 F.3d at 1376. Whether or not the MSR could have provided results or was sufficient for full regulatory approval does not change that the MSR teaches Patent Owner’s claimed steps. We have no reason to doubt that the disclosure in the MSR of the steps recited in claim 1 produces the efficacy element required in claim 1, whether or not this efficacy was disclosed in the MSR or was known when it was published. See Mehl/Biophile, 192 F.3d at 1366 (“Where, as here, the result is a necessary consequence of what was deliberately intended, it is of no import that the article’s authors did not appreciate the results.”).” slip op. at 21

    • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

      “use that does not qualify as prior art. PO Resp. 18–25. Patent Owner argues that an inventor can be granted latitude to experiment in the public eye until her invention is ready for patenting. Id. at 18 (citing Pfaff v. Wells Elecs., Inc., 525 U.S. 55, 64 (1998). According to Patent Owner, the experimental use negation applies to the MSR under a 13-factor analysis provided in Allen Engineering Corp. v. Bartell Industries, Inc., 299 F.3d 1336, 1353 (Fed. Cir. 2002). PO Resp. 19–25. For example, Patent Owner argues that to establish that treatment of MSI-H cancers was effective, the inventors had to test treatment in humans, there being no animal models, and had to publish the MSR on the government website under federal law. Id. at 20–22. Patent Owner argues further that the inventors had control over the MSI-H clinical study and that the field of cancer treatment was highly unpredictable, among other facts. Id. at 21. Patent Owner argues that “[a]t the time of the MSR’s posting, the claimed invention was not, nor could it have been, ready for patenting. The clinical study that ultimately collected the data reported in the patent specification and supporting the patent claims had not and could not have commenced before the MSR was posted.” Id. at 23. sometimes said that an inventor acquires an undue advantage over the public by delaying to take out a patent, inasmuch as he thereby preserves the monopoly to himself for a longer period than is allowed by the policy of the law,” but held that “when the delay is occasioned by a bona fide effort to bring his invention to perfection, or to ascertain whether it will answer the purpose intended,” the experiment use exception can preserve the inventor’s rights. City of Elizabeth v. Am. Nicholson Pavement Co., 97 U.S. 126, 137 (1877). Because we are not persuaded that Patent Owner could not have filed an earlier application, we are not persuaded that the experimental use doctrine is properly applied in this case. Given that clinical trial protocols published on the ClinicalTrials.gov website have been successfully asserted as prior art in other cases, we are not persuaded by Patent Owner’s arguments that the MSR is not available as prior art against the challenged claims. See, e.g., Salix Pharms., Ltd. v. Norwich Pharms. Inc., 98 F.4th 1056, 1061 (Fed. Cir.), cert. denied, 145 S. Ct. 567 (2024), and cert. denied, 145 S. Ct. 983 (2024).” slip op. at 24

    Patent outcomesUS 11,325,975 unpatentable
    Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
    Patents in suitUS 11,325,975
  • PTAB · Oct 29, 2025 · IPR2025-00918 · APJ Avelyn M Ross · IPR · Institution

    The Board instituted inter partes review of claims 1–11 on all asserted grounds and granted Canadian Solar’s motion for joinder in IPR2025-00007.

    RulingsInstitution decision
    • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

      “We instituted review of claims 1–11 of the ’104 patent in IPR2025-00007 after a review of all arguments and evidence presented by the parties, including Patent Owner’s arguments in its preliminary response. For the reasons discussed in the Institution Decision in IPR2025-00007, we determine that Petitioner demonstrates a reasonable likelihood of showing at least one claim of the ’104 patent is unpatentable. Thus, we find that the Petition warrants institution of inter partes review on all claims and grounds set forth in the Petition.” slip op. at 11

    • PTAB / AIA Trials › Joinder §315(c) / SAS all-or-nothingJoinder, grantedGranted

      “Patent Owner did not file an opposition to Petitioner’s Motion for Joinder. Upon consideration of Petitioner’s arguments, we are persuaded that it is appropriate under these circumstances to join Petitioner to the proceeding in IPR2025-00007. Petitioner’s agreement to accept an “understudy” role and to not actively participate in IPR2025-00007 unless the current petitioner ceases to participate will limit any potential impact on the trial schedule and will avoid increasing the costs or complexity of the proceeding. Therefore, joinder of 8 Available at https://www.uspto.gov/TrialPracticeGuideConsolidated. Petitioner to IPR2025-00007 will further the goals of a just, speedy, and inexpensive resolution of Petitioner’s challenge. 37 C.F.R. § 42.1(b).” slip op. at 12

    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “In light of the record before us, and for purposes of this Decision, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’104 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand the ’104 patent and the prior art. We will make any final determination pertaining to the level of ordinary skill in the art, however, on the full trial record.” slip op. at 10

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “For purposes of this Decision, we need not expressly construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 11

    Claim constructioncites Phillips · KSR · Graham
    Patents in suitUS 9,722,104
Page 1 of 9
← Previous12345…Next →

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.