- Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentablePTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision
Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other
“Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner
“We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29
Patent outcomesUS 11,886,774 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,886,774 - Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.All claims unpatentablePTAB · Jun 1, 2026 · IPR2025-00117 · APJ Michael T Cygan · IPR · Final written decision
Claims 1–19 are unpatentable: claims 1–9, 11–16, 18, and 19 as obvious over Kim; claims 10 and 17 as obvious over Kim and Fang, Park, and Park and Fang.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“at the critical time “would have had a bachelor of science degree in electrical engineering or a similar discipline, along with 2-3 years of professional experience working with (e.g., researching, designing, or teaching) monolithic 3D structures and NAND flash memory devices, or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 27 (citing Ex. 1003 ¶ 42). Petitioner further asserts that a POSITA “would have been aware of and generally knowledgeable about 3D NAND’s structure, its component parts, how it operates, and how it is controlled.” Id. Patent Owner does not dispute Petitioner’s definition. PO Resp. 7. We adopt Petitioner’s proposed 4 Neither party presents evidence or arguments regarding objective evidence of non-obviousness. Pet. 103; PO Resp. the ’711 patent and the prior art of record.” slip op. at 5
- Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed petitioner constructionDecided for petitioner
“Based on the record before us, we agree with Petitioner that “on a surface” should be interpreted in line with the definition of “on” set forth in the ’711 patent. Ex. 1001, 4:1–6. We particularly note that the ’711 patent states that “‘on’ . . . should be interpreted in the broadest manner” and that “on” is not limited to “directly on.” Id. Instead, the ’711 patent states that “‘on’ also includes the meaning of ‘on’ something with an intermediate feature or layer therebetween.” Id. Patent Owner agrees that this definition controls the “standalone ‘on’” term such that A may be on B even if there is an intervening layer between them. Tr. 55:8–11 (“The standalone ‘on,’ we agree in the context of the patent, you can have intervening layers. I think the patent is clear about that.”). Claim 14 recites that the etch-stop layer is “on” something; i.e., “on a side surface and a top surface of each step.” Ex. 1001, 16:20–22. Patent Owner agrees that a surface is a “something.” Tr. 56:5–8 (“surface obviously is a something”). Substituting the “a “‘on’ something with an intermediate feature or layer therebetween” results in claim 14 reading as, “on a surface with an intermediate feature or layer therebetween.” Unlike “directly on,” which specifies the relation between two things, “a surface” may merely indicate the thing that something is “on,” particularly when “on” is “interpreted in the broadest manner” as expressly required by the ’711 patent.” slip op. at 7
- Expert testimonyPatent owner expert discountedDecided for petitioner
“Although Dr. Campbell testified in his deposition in response to Petitioner’s counsel that “on the surface” requires direct contact with the surface, his interpretation was based on “embodiments of” the patent rather than a general understanding of a person skilled in the art confronted with that term. Ex. 1027, 122:6–25, 124:6–23 (“I’m not sure if there are other sources for that, but it was on the ’711, so I’ve taken it there.”). Dr. Campbell, upon questioning from Patent Owner’s counsel, later stated that “an expert in semiconductor fabrication” would understand “on the surface” to mean “contact between one layer and another . . . with nothing in between.” Id. at 146:25–147:6. However, Dr. Campbell did not explain why such an interpretation is particular to the semiconductor fabrication art, or provide other explanation or support for this statement, which is in tension with the definition of “on” in the ’711 patent. Accordingly, we significantly discount the weight accorded to that statement. Phillips, 415 F.3d at 1318 (stating, “conclusory, unsupported assertions by experts as to the definition of a claim term are not useful to a court. Similarly, a court should discount any expert testimony ‘that is clearly at odds with the claim construction mandated by the claims themselves, the written description, and patent.’”). On balance, Dr. Campbell’s testimony is best understood as a description of certain Figures of the ’711 patent rather than a representation of an ordinarily skilled person’s understanding of the term “on the surface.” See Ex. 2009 ¶ 47 (describing Figs. 1, 3, and 4 as depicting layers in contact with the underlying layer or substrate). For example, Dr. Campbell describes Figure 9A as having a barrier layer “on and directly contacting the top and side surfaces of each step.” Id. ¶ 28 (emphasis added) (citing inter alia Ex. 1001, 7:6–67). Dr. Campbell does not explain why, beyond the fact that many Figures show layers as adjacent and in contact, a person of ordinary skill in the relevant art would understand those Figures to limit the claim language rather than illustrating particular embodiments that fall within a broader scope of claims 14 and 15. See Hill-Rom Servs., Inc. v. Stryker Corp., 755 F.3d 1367, 1371 (Fed. Cir. 2014) (“While we read claims in view of the specification, of which they are a part, we do not read limitations from the embodiments in the specifications into the claims.”).” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“We agree with Petitioner that Kim’s first and second section are described as compatible, not mutually exclusive, embodiments. Kim’s second section builds further layers upon the structure of its first section, and states: In these embodiments, the same elements as in the embodiments previously described with reference to FIGS. 5A through 14A and FIGS. 5B through 14B will be denoted by the same reference numbers therein, and for concise description, overlapping description of elements previously described with reference to FIGS. 5A through 14A and FIGS. 5B through 14B may be omitted. Ex. 1005 ¶ 184 (emphasis added). Patent Owner argues that only the embodiments in Figures 17A–22B describe an etch-stop layer and a barrier layer (as claimed), and that the language cited for a gate-stack-on-top configuration (e.g., Ex. 1005 ¶¶ 90, 91, and 240) is “conspicuously absent from the description of Figures 17A–22B.” PO Resp. 20 (citing Ex. 2009 ¶ 36). However, Figures 17A–22B do not further address the underlying staircase structure that was detailed in the descriptions of the Figures 4 through 15 embodiments. While Figures 17A–22B show a gate-stack-on-bottom configuration, this merely continues the gate-stack-on-bottom illustrations that were used in all of the previous Figures, even for those in which it is undisputed that a gate-stack-on-top configuration is a described alternative. The Figures exemplify rather than limit the description of the gate-stack-on-bottom view in Figures 4–15 and do not exclude the gate-stack on bottom description of the embodiments exemplified by those figures.” slip op. at 17
Patent outcomesUS 10,672,711 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,672,711 - Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.No claims unpatentablePTAB · Jan 5, 2026 · IPR2024-00911 · APJ Kimberly Mcgraw · IPR · Final written decision
Claim 10 was not shown unpatentable under § 103 over Toyama because the challenge did not remedy the deficiencies in its nonobvious base claim 8.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedOther
“Petitioner’s proposed definition appears to be consistent with the cited prior art and the disclosure of the ’806 patent, and we adopt it for purposes definition of a POSITA.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“In our Decision on Institution, we noted that the parties disputed construction of “each local contact” found in dependent claim 10, and “dielectric structure” recited in independent claim 8. Inst. Dec. 8–9. We determine that no express construction of “each local contact” recited in claim 10, or any other claim term, is required to resolve the issues in dispute in this proceeding.” slip op. at 9
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“independent claim 8 would have been obvious for the reasons set forth in its petition in the 791-IPR. See id. at 1 (stating the present Petition maintains the same grounds set forth in IPR2024-00791). As explained in our Final Written Decision (Ex. 3001) in the 791-IPR issued concurrently, Petitioner did not show by a preponderance of the evidence that independent claim 8 would have been obvious over Toyama under any of Petitioner’s three alternative arguments. None of Petitioner’s arguments set forth in the present Petition, including the arguments directed to claim 10, remedy the deficiencies regarding its base claim 8. See Pet. 53–31, 98–101, 124–125; see also Reply. Accordingly, for the same reasons set forth in the Final Written Decision in the 791-IPR issued concurrently, Petitioner has not shown by a preponderance of the evidence that independent claim 8, and therefore dependent claim 10, would have been obvious over Toyama. See In re Fine, 837 F.2d 1071, 1076 (Fed. Cir. 1988) (“Dependent claims are nonobvious under section 103 if the independent claims from which they depend are nonobvious.”); Ex. 3001.” slip op. at 14
- Expert testimonyNot reached
“Petitioner relies on the Declaration of Jack C. Lee, Ph. D. (Ex. 1003) and the Reply Declaration of Jack C. Lee, Ph.D. (Ex. 1043) in support of its 2 The Leahy-Smith America Invents Act (“AIA”), Pub. L. No. 112–29, 125 Stat. 284 (2011), revised 35 U.S.C. §§ 102 and 103 effective March 16, 2013. Because the ’806 patent has an effective filing date after March 16, 2013 (Ex. 1001, codes (22), (63)), we refer to the AIA version of Sections 102 and 103. 3 Toyama, US Pub. No. 2017/0179026 A1, published June 22, 2017 (Ex. 1005). 4 Petitioner characterizes its alternative arguments of unpatentability of claim 10 as based on three “grounds.” See Pet. 15. Because each of Petitioner’s arguments are based on the same reference, albeit different embodiments, we characterize Petitioner’s challenges as three alternative arguments based on a single ground because each argument relies on the same reference. Ph.D. (Ex. 2005). Transcripts of the depositions of Dr. Lee (Exs. 2006, 2010) and of Dr. Yang (Ex. 1044) have also been submitted into the record.” slip op. at 7
Patent outcomesUS 10,937,806 not shown unpatentableClaim construction§ 103 obviousnesscites PhillipsPatents in suitUS 10,937,806 - Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.All claims unpatentablePTAB · Jan 5, 2026 · IPR2024-00909 · APJ Michael T Cygan · IPR · Final written decision
Claims 1–7 and 18 are unpatentable as obvious over Toyama, based on the First Exemplary Structure and, for some limitations, the Second Modification.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner asserts that a person of ordinary skill in the art (“POSITA”) at the critical time “would have had a bachelor of science degree in electrical engineering or a similar discipline, along with 2-3 years of professional experience working with (e.g., researching, designing, or teaching) NAND 2 We apply AIA 35 U.S.C. §§ 102, 103 to the ’378 patent because it was filed after, and never claimed the benefit of an effective filing date before, March 16, 2013. Petitioner also applies AIA §§ 102 and 103. See Pet. 2, 24–26. 3 Neither party presents evidence or arguments regarding objective evidence of non-obviousness. Pet. 104; PO Resp. experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 33 (citing Ex. 1003 ¶¶ 37–39). Petitioner further asserts that a POSITA “would also have been aware of and generally knowledgeable about semiconductor manufacturing and 3D NAND’s structure, its component parts, how it operates, and how it is controlled.” Id. Patent Owner does not object to such a definition. PO Resp. 13. We adopt Petitioner’s proposed level of ordinary skill, as it appears to be consistent with the Specification of the ’378 patent and the prior art of record.” slip op. at 5
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Petitioner asserts that only the term “a staircase structure in the alternating layer” should be construed, and that the term should be construed as “a staircase structure in the alternating layer stack.” Pet. 32–33. Patent Owner does not dispute this construction, and our determination would be unaffected by Petitioner’s proposed construction. Therefore, we need not provide an express construction of this term. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Petitioner asserted that all other terms should receive their plain and ordinary meaning. Pet. 33.” slip op. at 6
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner
“Because neither the language of claim 15 nor the Specification indicates a narrower meaning, we agree with Petitioner that the phrase “a substrate with an isolation structure” should be given its plain meaning. Patent Owner argues that the plain meaning of “with” is “having” or “inclusive of.” PO Sur-reply 2 (citing Ex. 1038, 8). Citing the same dictionary, Petitioner argues that the plain meaning of “with” includes objects that are separate. Pet. Reply 3 (stating, “In the sentence ‘Alice went to school with Bob,’ it would be nonsensical to interpret that to mean that Bob is part of Alice.”) (citing Ex. 1038, 7). The cited definition of “with” states that it may indicate “accompaniment,” such as “went there [with] her,” as well as combination (“milk [with] honey”). Ex. 1038, 7. Based on the evidence and arguments presented, we determine that the phrase “a substrate with an isolation structure” should be given its plain meaning, which includes accompaniment (A is accompanied by B) as well as combination (A is part of B, or A and B are a part of C).4” slip op. at 9
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“We are persuaded by Petitioner that the lower volume of Toyama’s dielectric fill portion teaches the isolation structure and the upper volume of Toyama’s dielectric fill portion teaches the dielectric structure. First, the structure may be the same material; i.e., SiO2. Ex. 1001, 10:37–40 (isolation structure 233 filled with SiO2), 10:46–47 (dielectric structure can include SiO2, and can include the same material as dielectric layer 230), 10:12–14 (dielectric layer 230 is formed of SiO2). Second, the ’378 patent indicates that the dielectric structure may be “aligned to” and “in contact with” the isolation structure. Id. at 10:30–36. Thus, the two structures of the ’378 patent may appear as two aligned and contacting structures; e.g., a single column of the same material. Third, the ’378 patent specification describes that the dielectric structure and a top portion of the isolation structure may be formed in the same deposition step. When etching the opening 600 that is to be filled with dielectric structure 232, “opening 600 may extend partially into STI structure 233;” i.e., “the etch process used to form opening 600 may also remove (recess) portion of the top surface of STI structure 233.” Id. at 15:12–20; Fig. 6. Then, “opening 600 can be filled with a dielectric layer 702,” which may be the same SiO2 material as the isolation structure, and “[a]s a result, dielectric structure 232 is formed.” Id. at 15:42–54. Thus, the ’378 patent describes a dielectric structure that partially replaces or re-forms, with the same material, its isolation structure. The ’378 patent does not mention whether this results in a dielectric structure that extends into the isolation structure or an isolation structure re-filled to its original height, and it would not appear to matter because both structures may be composed of the same material. The ’378 patent’s indifference to the exact boundary between dielectric structure 232 and isolation structure 233 during formation from the same material indicates that these structures need not be taught by distinct elements. applicable only if the ’378 patent describes that the isolation region and dielectric structure were formed as a single unitary structure. PO Resp. 51; PO Sur-reply 16–18. Retractable Techs. focuses on whether the two elements at issue “could be formed as an integral structure in the first instance,” not whether they were formed integrally. Retractable Techs., 653 F.3d at 1304 (“The specifications further disclose a method to couple the two structures . . . to allow some diffusion or insipient melting to occur where they touch . . . . This passage suggests that [the structures] could be formed as an integral structure in the first instance”). Retractable Techs. looks to whether the specification suggests that the claim terms require separate structures. Powell v. Home Depot U.S.A., Inc., 663 F.3d 1221, 1232 (Fed. Cir. 2011). Patent Owner’s focus on whether the claimed structures were disclosed as being separately formed disregards the issue of whether the separately claimed structures require specific methods of forming those structures. Here, as in Retractable Techs. and Powell, the Specification does not indicate any particular structure or function for the structures that results from their separate steps of deposition. Thus, as held in Retractable Techs. and Powell, the two portions of Toyama “need not be two separate parts” to teach two separate claim limitations. Retractable Techs., 635 F.3d at 1303–04. Consequently, we determine that the claim language does not support a requirement that these structures be separate and distinct. Patent Owner’s further arguments are not availing. Contrary to Patent Owner’s argument, in our “Third” point, supra, we do not state that the isolation structure and the dielectric structure are formed in the same deposition step. PO Resp. 52–53; PO Sur-reply 18; Supra at 34. We only” slip op. at 33
Patent outcomesUS 10,658,378 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,658,378 - Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.All claims unpatentablePTAB · Jan 5, 2026 · IPR2024-00788 · APJ Michael T Cygan · IPR · Final written decision
Claims 15–17, 19, and 20 are unpatentable as obvious over Toyama, Mushiga, and Mushiga with Makala.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“at the critical time “would have had a bachelor of science degree in electrical engineering or a similar discipline, along with 2-3 years of professional experience working with (e.g., researching, designing, or teaching) NAND flash memory devices, or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 27 (citing Ex. 1003 ¶¶ 36–37). Petitioner further asserts March 16, 2013. Petitioner also applies AIA §§ 102 and 103. See Pet. 2, 24–26. 3 Neither party presented evidence or arguments regarding objective evidence of non-obviousness during trial. knowledgeable about semiconductor manufacturing and 3D NAND’s structure, its component parts, how it operates, and how it is controlled.” Id. (emphasis omitted). Patent Owner does not object to this assessment. PO Resp. 12. We adopt Petitioner’s proposed level of ordinary skill, as it appears to be consistent with the specification of the ’378 patent and the prior art of record.” slip op. at 5
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Petitioner does not dispute Patent Owner’s construction, asserting that its grounds render obvious this limitation under Patent Owner’s construction propose construction of the term “through array contact,” which was at issue in the Preliminary Response and in the parallel district court proceeding. Id. Nor have the parties indicated, in response to Board inquiry, that any relevant construction has occurred. See Paper 34. with Petitioner that Patent Owner does not dispute this aspect of the “a dielectric structure on the isolation structure” limitation in Petitioner’s assertions based on Toyama. PO Sur-reply 20–21. Patent Owner does dispute that Mushiga’s insulating spacer 586 is “on” the isolation structure. PO Resp. 70–72. However, because Petitioner relies upon a dielectric structure that includes other portions of Mushiga that Patent Owner does not dispute to be on the asserted isolation structure, the dispute is whether Petitioner is correct to include multiple components as part of a single dielectric structure, and not whether spacer 586 is on an isolation structure. Id. Because Petitioner’s assertions and our determination would be unaffected by its proposed construction, we need not construe this term. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner
“Patent Owner’s citations to the Specification do not support its proposed construction. Patent Owner relies on multiple embodiments, only one of which describes a substrate “with” an isolation structure. PO Resp. 21 (citing Ex. 1001, 22:27–28). For example, one of Patent Owner’s cited embodiments recites “on” an isolation region, but Patent Owner specifically argues that the “on” embodiment does not apply to the claimed “with” embodiment. Id. at 22 (denying that “the ‘with’ relationship encompasse[s] the ‘on’ relationship”). Only one of the embodiments cited is clearly within the scope of the “with” claim language, and that embodiment describes no more than the claim language itself. Ex. 1001, 22:27–28. Moreover, Figure 2, cited by Patent Owner, is an illustration “according to some embodiments,” but is not described as depicting all embodiments. Ex. 1001, 3:35–36. These other embodiments need not be included in claim 15’s “with” language because other claims (not at issue in this proceeding) specifically recite language from other embodiments. Ex. 1001, 23:20–21 (“a dielectric structure on an isolation region of the substrate”), 23:58 (“forming an isolation structure on a substrate”). Thus, the specification of the ’378 patent does not limit “a substrate with an isolation structure” in claim 15 to “part of” an isolation structure, such as in a shallow region or other partial-depth portion of the substrate. Because neither the language of claim 15 nor the Specification indicates a narrower meaning, we agree with Petitioner that the phrase “a Patent Owner argues that the plain meaning of “with” is “having” or “inclusive of.” PO Sur-reply 2 (citing Ex. 1038, 7). Citing the same dictionary, Petitioner argues that the plain meaning of “with” includes objects that are separate. Pet. Reply 3 (stating, “In the sentence ‘Alice went to school with Bob,’ it would be nonsensical to interpret that to mean that Bob is part of Alice.”) (citing Ex. 1038, 7). The cited definition of “with” states that it may indicate “accompaniment,” such as “went there [with] her,” as well as combination (“milk [with] honey”). Ex. 1038, 7. Based on the evidence and arguments presented, we determine that the phrase “a substrate with an isolation structure” should be given its plain meaning, which includes accompaniment (A is accompanied by B) as well as combination (A is part of B, or A and B are a part of C).” slip op. at 9
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“We are persuaded by Petitioner that the lower volume of Toyama’s dielectric fill portion teaches the isolation structure and the upper volume of Toyama’s dielectric fill portion teaches the dielectric structure. First, the ’378 patent indicates that both the dielectric structure and the isolation structure may be the same material; i.e., SiO2. Ex. 1001, 10:37–40 (isolation structure 233 filled with SiO2), 10:46–47 (dielectric structure can include SiO2, and can include the same material as dielectric layer 230), 10:12–14 (dielectric layer 230 is formed of SiO2). Second, the ’378 patent indicates that the dielectric structure may be “aligned to” and “in contact with” the isolation structure. Id. at 10:30–36. Thus, the two structures of the ’378 patent may appear as two aligned and contacting structures; e.g., a single column, of the same material. Third, the ’378 patent specification describes that the dielectric structure and a top portion of the isolation structure may be formed in the same deposition step. When etching the opening 600 that is to be filled with dielectric structure 232, “opening 600 may extend partially into STI structure 233;” i.e., “the etch process used to form opening 600 may also remove (recess) portion of the top surface of STI structure 233.” Id. at 15:12–20. Then, “opening 600 can be filled with a dielectric layer 702,” which may be the same SiO2 material as the isolation structure, and “[a]s a result, dielectric structure 232 is formed.” Id. at 15:42–54. Thus, the ’378 patent describes a dielectric structure that partially replaces or re-forms, with the same material, its isolation structure. The ’378 patent does not mention whether this results in a dielectric structure that extends into the isolation structure or an isolation structure re-filled to its original height, and it would material. The ’378 patent’s indifference to the exact boundary between dielectric structure 232 and isolation structure 233 during formation from the same material indicates that these need not be taught by distinct elements. We do not agree with Patent Owner that Retractable Techs. is applicable only if the ’378 patent describes that the isolation region and dielectric structure were formed as a single unitary structure. PO Resp. 50; PO Sur-reply 9. Retractable Techs. focuses on whether the two elements at issue “could be formed as an integral structure in the first instance,” not whether they were formed integrally. Retractable Techs., 653 F.3d at 1304. (“The specifications further disclose a method to couple the two structures . . . to allow some diffusion or insipient melting to occur where they touch . . . . This passage suggests that [the structures] could be formed as an integral structure in the first instance”). Retractable Techs. looks to whether the specification suggests that the claim terms require separate structures. Powell v. Home Depot U.S.A., Inc., 663 F.3d 1221, 1232 (Fed. Cir. 2011). Patent Owner’s focus on whether the claimed structures were disclosed as being separately formed disregards the issue of whether the separately claimed structures require specific methods of forming those structures. Here, as in Retractable Techs. and Powell, the Specification does not indicate any particular structure or function for the structures that results from their separate steps of deposition. Thus, as held in Retractable Techs. and Powell, the two portions of Toyama “need not be two separate parts” to teach two separate claim limitations. Retractable Techs., 635 F.3d at 1303– 04. Consequently, we determine that the claim language does not support a requirement that these structures be separate and distinct.” slip op. at 32
Patent outcomesUS 10,658,378 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,658,378 - PTAB · Dec 9, 2025 · IPR2025-00756 · APJ Thu A Dang · IPR · Institution
The Board instituted IPR on claims 1, 2, 5–8, 11, and 12 on three §103 grounds, finding a reasonable likelihood of unpatentability over the asserted combinations.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“III. CONCLUSION Because we determine that Petitioner has demonstrated a reasonable likelihood that it would prevail in showing at least one of the challenged claims is unpatentable, we institute inter partes review as to all challenged claims and grounds presented in the Petition. At this stage of the proceeding, we have not made a final determination as to the patentability of any of these challenged claims. ORDER For the reasons given, it is ORDERED that pursuant to 35 U.S.C. § 314, an inter partes review is instituted as to claims 1, 2, 5–8, 11, and 12 of the ’803 patent to determine whether: 1) claims 1, 5–7, 11, and 12 are unpatentable under 35 U.S.C. § 103 as obvious over TS 36.300, TS 36.321, and TS 36.331; 2) claims 1, 2, 5–8, 11, and 12 are unpatentable under 35 U.S.C. § 103 as obvious over Ericsson and TS 25.331; and 3) claims 5, 6, 11, and 12 are unpatentable under 35 U.S.C. § 103 as obvious over Ericsson, TS 25.331, and Sebire; and” slip op. at 27
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“ordinary meaning, “primary” and “non-primary” cells are all cells that the WTRU is connected to (PO Resp. 16), the plain language in claim 1, and similarly in claim 7, does not require a “primary” node or “non-primary” cell to have a connection to the WTRU. See Ex. 1001, 10:38−56; 11:11–26. We find unavailing Patent Owner’s contention that the claims require that the WTRU “be connected to more than one cell,” wherein cells that are “associated with a wireless network node,” but are not connected to the WTRU “at the same time” cannot be “primary” or “non-primary” cells. PO Resp. 16. In the ’803 patent, nothing in the Specification clearly limits “primary” and “non-primary” cells as Patent Owner proposes. Prelim. Resp. 16. Patent Owner points to the Specification of the ’803 patent to show that, for softer handover, the WTRU is connected “with more than one cell [] which are controlled by the same Node-B,” and “[o]ne of the[se] cells 808 may be designated as a primary cell 808a, while other cells are designated as a non-primary cells 808b.” Id. (alterations in original) (citing Ex. 1001, 8:44–46, 9:4–6, Figs. 8A–B). However, this portion of the Specification (describing a softer handover embodiment in which a cell “may be designated” as a primary while other as non-primary) does not provide a clear definition to warrant interpreting the “primary” and “non-primary” cells as requiring “connection” to the WTRU “at the same time.” Id. That is, nothing in the Specification clearly precludes “primary” and “non-primary” cells from being “source” and “target” cell, as Patent Owner contends. PO Resp. 16. and the Specification, we determine that the terms “primary” and “non-primary” recited in claims 1 and 7 are not limited to cells connected to a WRTU at the same time. We determine no further explicit construction of this term is necessary to resolve the controversy. See Vivid Techs., 200 F.3d at 803.” slip op. at 8
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“f) Motivation to combine Ericsson and TS 25.331 Petitioner contends that a “POSITA would have been motivated to combine Ericsson and TS 25.331 because they are directed to similar technologies and a skilled artisan would have understood the benefits of combining these two references,” and “would have understood that there was a high likelihood of success in making the combination.” Pet. 34 (citing Ex. 1003 ¶¶ 156–157). In particular, the references “are both reasonably pertinent to the problem faced by the inventor, namely protocols for handover in a telecommunications system.” Id. (citing Ex. 1003 ¶ 158). According to Petitioner, the combination “involves the predictable use of interchangeable prior art elements according to their established functions” more than routine engineering.” Id. at 37 (citing Ex. 1003 ¶ 174). At this stage of the proceeding, Patent Owner does not present arguments in the Preliminary Response addressing the specific merits of Petitioner’s contentions with respect to the motivation to combine Ericsson and TS 25.331. See generally Prelim. Resp. 15–18. We find availing Petitioner’s contention that Ericsson and TS25.331 are “directed to similar technologies,” and that a “skilled artisan would have understood the benefits of combining these two references.” Pet. 34. On this preliminary record, we are persuaded that Petitioner has made a sufficient showing that a POSITA would have had a reason to combine the teachings of Ericsson and TS 25.331.” slip op. at 20
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner, relying on the testimony of Dr. Kakaes, contends that a person of ordinary skill in the art (POSITA) “would have had a B.S. in Electrical Engineering or a related field with at least three years of experience designing, developing, and/or testing telecommunication systems,” and “would also have familiarity with the wireless standards and well-known protocols for accessing wireless networks existing at the relevant time,” wherein “[m]ore education may supplement practical experience or vice versa.” Pet. 12–13. At this stage in the proceeding, Patent Owner does not contest Petitioner’s proposal or offer an alternative. On this record, we are persuaded that Petitioner’s proposal is consistent with the technology described in the Specification and the cited prior art. For purposes of this Decision, we adopt Petitioner’s proposed level of skill.” slip op. at 10
Claim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,764,803 - Google LLC v. Eyesmatch Ltd.Some claims unpatentablePTAB · Nov 21, 2025 · IPR2025-00296 · APJ Neil T Powell · IPR · Final written decision
Claims 1–18 are unpatentable: claims 1–6 and 10–12 over Rosenberg and Park, and claims 3, 4, 7–9, and 11–18 over Rosenberg, Park, and Geisner.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“December 18, 2012, would have a bachelor’s degree in electrical or computer engineering, or a closely related field such as computer science, and two years of work experience with image capture and processing systems or related fields.” Pet. 7 (citing Karam Decl. ¶ 91). Petitioner adds that “[a] person with less and/or different education, but more relevant practical experience, or vice versa, may also meet this standard.” Id. According to Petitioner, [t]he prior art also evidences such level of skill.” Id. Patent Owner states that it “applies Petitioners’ proposed level of skill for purposes of this Response.” PO Resp. 9 (citing Forsyth Decl. ¶¶ 53–54). For this Decision, we adopt the formulation of the level of ordinary skill in the art proposed by Petitioner and applied by Patent Owner as consistent with the prior art before us in this proceeding.10” slip op. at 9
- Prior constructionPrior construction adoptedDecided for patent owner
“Turning to the substantive issues, we find the District Court’s “mirror tracking mode” construction to be well-reasoned and supported by the record, and we therefore adopt that construction and its reasoning. As the District Court points out, both the “double the distance” and “same size” aspects of its construction are expressly discussed in the ’109 patent, which is incorporated in the ’110 patent. See Ex. 2008, 16 (citing Ex. 1021, 2:5–27, Figs. 5A, 5B), 40 (citing “same reasons set forth regarding the term ‘it appears to mimic a reflection of a mirror’” in support of construction of “mirror tracking mode”). So, too, is “flipping” or reversing of the image disclosed. Id. at 17 (citing Ex. 1021, 14:46–51, 15:41–47), 40.” slip op. at 14
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Post-institution, Patent Owner invites us to construe limitation 1[f]’s recitation of “mirror tracking mode” and limitation 1[c]’s recitation of “adaptive transformation mapping.” PO Resp. 9–14. Regarding the latter, Patent Owner explains that “[i]n the District Court Litigation, ‘adaptive transformation mapping’ was construed as ‘continuously variable transformation mapping’ and ‘transformation mapping’ was construed as a ‘selected set of image transformations.’” Id. at 14 (citing Ex. 2008, 14, 37; Ex. 2013 ¶¶ 25, 27). Patent Owner does not, however, identify any way that those claim constructions affect our analysis of the parties’ patentability disputes. We find it unnecessary in resolving the parties’ patentability disputes to construe expressly limitation 1[c]’s recitation of “adaptive transformation mapping.”” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“persuasively address limitation 1[f]’s “mirror tracking mode.” In particular, Petitioner does not address persuasively the requirement, as explained in Section II.B above, that mirror tracking mode involves processing camera-captured images in a way that “maintains roughly the same size regardless of the user movement.” At odds with this requirement, Petitioner founds its case on an assertion that “Haan teaches the claimed mirror tracking mode” because “if the viewer is within 35 cm of the camera, a tracking mode is entered, applying resizing transformation.” Pet. 44 (emphasis added) (citing Ex. 1005 ¶¶ 75–76, 80–82, 90–94, 97; Ex. 1003 ¶¶ 205–210). The resizing transformation Petitioner references actually involves magnifying the user’s image by an amount that changes based on the user’s position relative to the camera, quite the opposite of maintaining image size regardless of the user movement. Ex. 1005 ¶¶ 75–76, Fig. 8. Thus, Petitioner’s initial position is unpersuasive. Petitioner’s shift to Haan’s “reflective mirror mode and conventional mirror period in the dual mode” is also unavailing. Reply 8. Consistent with Patent Owner’s arguments, Petitioner does not provide persuasive evidence that these operating states of Haan’s device involve any processing of camera-captured images. Sur-reply 13–14. To the contrary, Haan suggests that anytime its device provides an unmagnified image, it comes from a reflection off a physical reflective surface. See, e.g., Ex.1005 ¶ 76 (“This can be done for instance by using the device as a simple mirror, i.e. not displaying an image on the display device, but using the device in the reflective mode.”) (emphasis added), ¶ 92 (“a simple reflective mode, to act as a mirror”), ¶ 29 (“for a first range of positions, no image is displayed, whereby the reflective layer acts as a mirror, and for a second range of positions, the recorded image is displayed.”) (emphasis added). We also find unpersuasive Petitioner’s Reply arguments based on Haan’s disclosure of smoothly transitioning from “using the device as a simple mirror” (i.e., using a physical reflecting surface) to displaying a magnified image. Reply 11 (citing Ex. 1005 ¶¶ 76, 80). To the extent this may establish a point around the transition at which Haan’s system displays an image with relatively little magnification, it does not establish that Haan teaches, suggests, or renders obvious holding the displayed size roughly constant, “regardless of the user movement.” Indeed, given Haan’s focus on helping the user see things more clearly with image magnification, Petitioner’s argument that it would have been obvious to hold the size of the image constant is not persuasive. See, e.g., Ex. 1005 ¶ 4.” slip op. at 23
Patent outcomesUS 8,982,110 mixedClaim construction§ 103 obviousnesscites PhillipsPatents in suitUS 8,982,110 - PTAB · Nov 6, 2025 · IPR2025-00820 · APJ Neil T Powell · IPR · Institution
The Board instituted IPR on claims 1–11 on all petition grounds, finding a reasonable likelihood that claim 1 would have been obvious over Tadros, Porter, Kalili, and Texin 990R.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. See 35 U.S.C. § 314; 37 C.F.R. § 42.4(a). To institute an inter partes review, we must determine that the information presented in the Petition and the Preliminary Response shows “a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons set forth below, we determine that there is a reasonable likelihood that Petitioner will prevail with respect to at least one challenged claim. We institute an inter partes review of claims 1–11 based on the grounds set forth in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Pet. 17–18 (citing Ex. 1007 ¶¶ 13–15). Patent Owner does not dispute Petitioner’s explanation of the level of skill in the art. See generally Prelim. Resp. At this stage of the proceeding and on the present record, we adopt Petitioner’s uncontested proposed level of ordinary skill in the art, which we find consistent with the level of ordinary skill in the art reflected by the ’090 patent and the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Additionally, only terms that are in controversy need to be construed, and these need be construed only to the extent necessary to resolve the controversy. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Both parties indicate that no claim terms need to be expressly construed. Pet. 29–30; Prelim. Resp. 5. Consistent with that, we determine that we need not construe any claim terms expressly in order to resolve the parties’ dispute regarding whether Petitioner has demonstrated a reasonable likelihood of prevailing.” slip op. at 8
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“Weighing the parties’ arguments and evidence, we find Petitioner’s arguments and evidence sufficient at this stage to demonstrate a reasonable likelihood of prevailing. Pet. 8–17, 30–49. For example, regarding whether of Porter’s disclosure to the problem faced by inventor of the ’090 patent. Pet. 8; Ex. 1007 ¶¶ 98–108, 125–127, 144–164. The ’090 patent illustrates that its inventor faced the problem of selecting desirable materials for an aligner, including selecting a desirable material for an aligner’s hard layer. Ex. 1001, 5:44–59. Petitioner and Dr. Osswald provide significant evidence and reasoning tending to show that Porter’s discussion of Tritan logically would have commended itself to the attention of an inventor facing the problem of selecting an aligner hard layer. Pet. 8 (citing Ex. 1007 ¶¶ 98–108, 125–127, 144–164). For example, Dr. Osswald explains that “because Tritan copolyesters are BPA-free, Rafih specifically discloses Tritan EX401 as an exemplary material” for its oral appliance. Id. ¶ 99 (citing Ex. 1104, 5:4–64, claims 2, 9, 10). In view of this, Dr. Osswald testifies that “Rafih would inform a [person of ordinary skill in the art] that Porter’s guidance regarding replacing polycarbonate with Tritan applies to dental appliances.” Ex. 1007 ¶ 146. At this stage, weighing Petitioner’s evidence against Patent Owner’s contrary attorney argument that Porter focuses on dishware, we determine Petitioner has shown sufficiently that Porter is analogous art. Pet. 8; Ex. 1007 ¶¶ 98–108, 125–127, 144–164; Prelim. Resp. 1, 9–10, 18–21.” slip op. at 11
Claim construction§ 103 obviousnesscites PhillipsPatents in suitUS 11,648,090 - PTAB · Nov 6, 2025 · IPR2025-00819 · APJ Kristina M Kalan · IPR · Institution
The Board instituted IPR on all challenged claims based on both obviousness grounds, finding a reasonable likelihood of success on at least one claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“that Petitioner has demonstrated a reasonable likelihood of showing that a person of ordinary skill in the art would have been motivated to combine the teachings of Tadros, Kalili, and Texin 990R to meet the limitations of the claims challenged under this ground.” slip op. at 14
- Skill levelSkill level petitioner adoptedDecided for petitioner
“would have had at least a four-year undergraduate degree in materials science, mechanical engineering, chemical engineering, or a related field and at least two years of experience in the field of polymer science, combined with at least two years of experience in the field of design, manufacture, and processing of thermoformable polymer sheets for use in various applications, such as in orthodontic and dental appliances. Additional education could substitute for professional experience and vice versa. Pet. 18–19 (citing Ex. 1007 ¶¶ 13–15). At this stage, Patent Owner does not dispute Petitioner’s proposal or offer an alternative proposal. See generally Prelim. Resp. Because Petitioner’s proposed level of ordinary skill in the art appears to be consistent with the cited prior art and is undisputed on this record, we adopt it for purposes of this Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (indicating that the prior art itself may reflect an appropriate skill level).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Only claim terms in controversy need be construed. Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”). For purposes of this Decision, we determine that no claim term requires express construction.” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“that Petitioner has demonstrated a reasonable likelihood of showing that a person of ordinary skill in the art would have been motivated to combine the teachings of Tadros, Kalili, and Texin 990R to meet the limitations of the claims challenged under this ground. We disagree that Petitioner fails to meet its burden as to the motivation to combine arguments. Petitioner persuasively maps the limitations of the challenged claims to portions of the references relied upon. Pet. 28–38 (claim 1), 38–51. Petitioner also, on this record, provides adequate statements of motivation to combine with a reasonable expectation of success. See, e.g., id. at 34–36 (citing Ex. 1007 ¶¶ 31, 39–42, 147–151, 174–176). The Petition’s reliance on supporting testimony and related corroborating evidence to support the combination does not amount to impermissible hindsight, as that testimony takes into account “knowledge which was within the level of ordinary skill in the art at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure.” In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971). Without further clarification or support from Patent Owner, and in the absence of testimony to support the assertion that a POSITA would not have combined the cited references in the manner proposed with a reasonable expectation of success, we are unpersuaded by Patent Owner’s arguments in this regard.” slip op. at 14
Claim construction§ 103 obviousnesscites KSRPatents in suitUS 11,154,384 - PTAB · Nov 6, 2025 · IPR2025-00818 · APJ Kristina M Kalan · IPR · Institution
The Board instituted IPR on all challenged claims 1–22 based on all three asserted obviousness grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“We have authority under 35 U.S.C. § 314(a), which provides that inter partes review may not be instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” After considering the briefing and cited evidence of record, we institute inter partes review because we find that Petitioner establishes a reasonable likelihood that it will prevail with respect to at least one of the claims challenged in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“understanding of a person of ordinary skill in the art at the time the invention was made. See Graham, 383 U.S. at 17–18. Petitioner proposes that a person of ordinary skill in the art (sometimes referred to herein as a “POSITA”) would have had at least a four-year undergraduate degree in materials science, mechanical engineering, chemical engineering, or a related field and at least two years of experience in the field of polymer science, combined with at least two years of experience in the field of design, manufacture, and processing of thermoformable polymer sheets for use in various applications, such as in orthodontic and dental appliances. Additional education could substitute for professional experience and vice versa. Pet. 18 (citing Ex. 1007 ¶¶ 13–15). At this stage, Patent Owner does not dispute Petitioner’s proposal or offer an alternative proposal. See generally Prelim. Resp. Because Petitioner’s proposed level of ordinary skill in the art appears to be consistent with the cited prior art and is undisputed on this record, we adopt it for purposes of this Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (indicating that the prior art itself may reflect an appropriate skill level).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner argues that no terms require construction, but that “Petitioner applies the prior art consistent with Patent Owner’s assertions in its Infringement Contentions (EX1014, 6-20.).” Pet. 26. Patent Owner does not propose any express claim constructions. Prelim. Resp. 5. Nor does Patent Owner allege that any of Petitioner’s claim interpretations contradict Petitioner’s position in the related district court litigation. Id. Only claim terms in controversy need be construed. Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”). For purposes of this Decision, we determine that no claim term requires express construction.” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“that Petitioner has demonstrated a reasonable likelihood of showing that a person of ordinary skill in the art would have been motivated to combine the teachings of Tadros, Kalili, and Texin 990R to meet the limitations of the claims challenged under this ground. We disagree that Petitioner fails to meet its burden as to the motivation to combine arguments. Petitioner persuasively maps the limitations of the challenged claims to portions of the references relied upon. Pet. 27–36 (claim 1), 36–46. Petitioner also, on this record, provides adequate statements of motivation to combine with a reasonable expectation of success. See, e.g., id. at 32–35 (citing Ex. 1007 ¶¶ 31, 39–41, 57–87, 146–150, 171–172). The Petition’s reliance on supporting testimony and related corroborating evidence to support the combination does not amount to impermissible hindsight, as that testimony takes into account “knowledge which was within the level of ordinary skill in the art at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure.” In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971). Without further clarification or support from Patent Owner, and in the absence of testimony to support the assertion that a POSITA would not have combined the cited references in the manner proposed with a reasonable expectation of success, we are unpersuaded by Patent Owner’s arguments in this regard. We also disagree with Patent Owner’s arguments about “adhesive lamination” using “tie layers” at this point in the proceeding. Prelim. Resp. 15–18. On this record, we are persuaded that Petitioner has adequately supported its arguments that one of ordinary skill in the art would have been motivated to use adhesive lamination to achieve the proposed combination. See, e.g., Pet. 33–35; Ex. 1007 ¶¶ 39–42, 120, 45, 51, 116, 120. Petitioner relies on Kalili as disclosing a hard layer suitable for combination with Tadros’s soft layers (Pet. 32), and more particularly, doing so in the context of a laminated multilayer aligner (Reply 4). To create the laminated multilayer aligner proposed, Petitioner’s suggested use of a particular type of well-known lamination, i.e. adhesive lamination, is sufficiently developed and supported in the Petition. Pet. 32–35. Here, Patent Owner recognizes that Kalili teaches lamination, but suggests that it does not specifically teach using adhesive lamination. Prelim. Sur-reply 5. We note, however, that the parties have identified limited types of known lamination for aligners: coextrusion, extrusion lamination, and adhesive lamination. Prelim Sur-reply 4; Pet. 14–15 n.3, 33. In KSR, the Supreme Court explained that when “there is a design need or market pressure to solve a problem and there are a finite number of identified, predictable solutions, a person of ordinary skill has good reason to pursue the known options within his or her technical grasp.” KSR, 550 U.S. at 421. “If this leads to the anticipated success, it is likely the product not of innovation but of ordinary skill and common sense.” Id. Having reviewed Petitioner’s proffered arguments as to Tadros, Kalili, and Texin 990R, including motivation to combine the references asserted in this ground, with a reasonable expectation of success, we are persuaded on this record that Petitioner has met its burden for institution with respect to Ground 1.” slip op. at 14
Claim construction§ 103 obviousnesscites KSRPatents in suitUS 10,973,613
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.