• Activision Blizzard, Inc. v. Milestone Entertainment, LLCNo claims unpatentable
  PTAB · Oct 14, 2026 · IPR2025-00712 · APJ Kevin W Cherry · IPR · Final written decision

  Claims 1, 3–9, 13, 17, 18, 23, 25, 26, 28, and 29 were not shown unpatentable because Walker was not prior art and Kelly did not teach limitations 1[d.i] and 1[d.ii].

  RulingsFinal written decision

  • Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportReference not prior artPriority date awardedDecided for patent owner

    “b) Walker Priority Date Under Dynamic Drinkware, the Petitioner is required to show that “the provisional application provides support for the claims of the patent or published application.” In re Riggs, 131 F.4th 1377, 1384 (Fed. Cir. 2025). Thus, Petitioner must show that (1) at least one claim of Walker is supported by its provisional (U.S. Provisional Application No. 60/378,289 (the “’289PROV”) and (2) the specific subject matter relied upon as prior art is supported by the ’289PROV. Id. Petitioner does provide a detailed explanation about how the ’289PROV supports claim 1 of Walker. See Reply 5–10. However, as Patent Owner argues, Petitioner fails to show that the ’298PROV provides support for the specific subject matter relied on in Walker. See Sur-Reply 3–9. Petitioner only explains how the ’298PROV discloses “predetermined criteria” but does not provide any other explanation for how the other subject matter relied on in Walker is supported by the ’298PROV. Thus, we find that Petitioner has failed to show that Walker is entitled a priority date before May 1, 2003. See Riggs, 131 F.3d at 1384 (noting while “a prior art patent or published application cannot be accorded the benefit of its provisional application’s filing date absent a showing that the provisional application provides support for the claims of the patent or published application,” the challenger must also show that “the specific portions of the patent specification identified and relied on” to demonstrate purported invalidity have written description support).” slip op. at 25

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “evidence that Kelly teaches limitations 1[d.i] and 1[d.ii]. As Patent Owner persuasively argues, “the recorded information regarding particular game play events” of limitations 1[d.i] and 1[d.ii] refers to “memory to . . . record game play information regarding particular game play events” in limitation 1[b.ii], but Petitioner does not map “the game play events” identified in limitation 1[b.ii] to limitations 1[d.i] and 1[d.ii]. In its Reply, Petitioner does not dispute Patent Owner’s assertion, but largely reiterates its arguments from the Petition. However, none of these arguments or evidence demonstrates that the “game play events” in limitations 1[d.i] and 1[d.ii] are same the “game play events” that are allegedly stored in limitation 1[b.ii]. Even if we accept Petitioner’s contention that it was not identifying button presses or the “game identifier,” but rather includes “game states and game events in the game process,” Petitioner provides no evidence or even arguments that what it has identified here relates to what it has identified for limitations 1[d.i] and 1[d.ii]. See Pet. 29–33 (citing Ex. 1005, 25:23–24, 26:59–27:1, 32:27–33, 37:1–10, 38:66–39:7 40:33–45, 56:49–51, 57:27–33). For these reasons, Petitioner has failed to show by a preponderance of the evidence that Kelly teaches or suggests limitations 1[d.i] and 1[d.ii]. Accordingly, we find that Petitioner has failed to show that claim 1 would have been obvious over Kelly. 2. Claims 3–9, 13, 17, 18, 23, 25, 26, 28, and 29 Claims 3–9, 13, 17, 18, 23, 25, 26, 28, and 29 all depend (either directly or indirectly) from claim 1. See PO Resp. 16 (explaining that the arguments for independent claim 1 also apply to the dependent claims inherent the deficiencies asserted with respect to the independent claims). We find Patent Owner’s arguments availing, as explained above. Accordingly, we find that Petitioner has failed to show by a preponderance of the evidence that claims 3–9, 13, 17, 18, 23, 25, 26, 28, and 29 would have been obvious over Kelly.” slip op. at 44

  • Expert testimonyPetitioner expert creditedDecided for patent owner

    “programmable variable parameter sets to achieve the mandated parameters,” we find that Patent Owner sufficiently explained “the notes from the 12/4/02 meeting reflect that the inventors proposed that their invention could raise the global payout percentage ‘to 75%’ – a mandated parameter – by ‘increas[ing] % of wins by the level 2,’ i.e., a secondary game level – a variable parameter.” See PO Resp. 28–32, 37, 38; Ex. 2016; Ex. 2017 ¶¶ 23–24, 41–42; Ex. 2012 ¶ 90, 63–64. Indeed, Mr. Crevelt confirmed that that a POSITA would unequivocally regard disclosure of “win rate[s]” and “global payout percentage[s]” as disclosing the claimed “mandated parameters” that are achieved by utilizing variable parameters. See Ex. 2020, 15:7–18:4, 19:14–21:16, 24:25–25:15 (global payout percentages), 21:18– 24:24 (win rates).” slip op. at 33

  Patent outcomesUS 11,393,279 not shown unpatentable
  § 102 anticipation§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 11,393,279
• Activision Blizzard, Inc. v. Milestone Entertainment, LLCNo claims unpatentable
  PTAB · Oct 14, 2026 · IPR2025-00708 · APJ Kevin W Cherry · IPR · Final written decision

  Claims 1, 3–5, 12, 13, 18–20, 22, 24–26, 29, 42, 44–47, and 50 were not shown unpatentable over Kelly or Walker and Schneier.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “understanding of a person of ordinary skill in the art (“POSITA”). In assessing the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (quoting Custom Accessories, Inc. v. Jeffrey-Allan Indus., Inc., 807 F.2d 955, 962 (Fed. Cir. 1986)). “[O]ne or more factors may predominate.” Id. Based on the testimony of Mr. Crevelt, we determine that a person of ordinary skill in the art would have had at least a bachelor’s degree in computer science or computer engineering, with at least three years of experience in game development. Pet. 14 (citing Ex. 1003 ¶¶ 62–65). Additional experience could substitute for less education, and additional education could likewise substitute for less experience. Id. We determine that the level of ordinary skill in the art adopted above is consistent with the level of technical understanding and competence reflected in the ’336 patent Specification and the asserted prior art references, based on our review of the record. Patent Owner states that “[f]or the purposes of this response, Patent Owner does not dispute Petitioners’ proposed level of skill, and under any level of skill a POSITA would not understand the asserted Grounds to raise any unpatentability issue,” and “this POR and supporting declarations apply Petitioner’s proposed level of skill.” PO Resp. 8. Thus, we adopt Petitioner’s articulation of the level of ordinary skill in the art, which is consistent with the ’336 patent and the asserted prior art, and we apply it in our obviousness analysis below.” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). We determine that no terms require express construction to resolve the parties’ disputes in this case. See id. slip op. at 13

  • Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date awardedDecided for patent owner

    “b) Walker Priority Date Under Dynamic Drinkware, the Petitioner is required to show that “the provisional application provides support for the claims of the patent or published application.” In re Riggs, 131 F.4th 1377, 1384 (Fed. Cir. 2025). Thus, Petitioner must show that (1) at least one claim of Walker is supported by its provisional (U.S. Provisional Application No. 60/378,289 (the “’289PROV”) and (2) the specific subject matter relied upon as prior art is supported by the ’289PROV. Id. Petitioner does provide a detailed explanation about how the ’289PROV supports claim 1 of Walker. See Reply 6–12. However, as Patent Owner argues, Petitioner fails to show that the ’298PROV provides support for the specific subject matter relied on in Walker. See Sur-Reply 3–8. Petitioner only explains how the ’298PROV discloses “predetermined criteria” but does not provide any other explanation for how the other subject matter relied on in Walker is supported by the ’298PROV. Thus, we find that Petitioner has failed to show that Walker is entitled a priority date before May 1, 2003. See Riggs, 131 F.3d at 1384 (noting while “a prior art patent or published application cannot be accorded the benefit of its provisional application’s filing date absent a showing that the provisional application provides support for the claims of the patent or published application,” the challenger must also show that “the specific portions of the patent specification identified and relied on” to demonstrate purported invalidity have written description support).” slip op. at 24

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “We find that Petitioner has failed to show by a preponderance of the evidence that Kelly teaches limitation 1[f]. As Patent Owner persuasively argues, “the game play events” of limitation 1[f] refers to “game play events” in limitation 1[d], but Petitioner does not map “the game play events” identified in limitation 1[d] to limitation 1[f]. In its Reply, Petitioner does not dispute Patent Owner’s assertion, but merely reiterates its arguments from the Petition. See Reply 23–24, 26. However, none of these arguments or evidence demonstrates that the “game play events” in limitation 1[f] are same the “game play events” that are allegedly stored in limitation 1[d]. Even if we accept Petitioner’s contention that it was not identifying button presses, but rather includes “game states and game events in the game process,” Petitioner provides no evidence or even arguments that what it has identified here relates to what it has identified for limitation 1[f]. See Pet. 25–26 (citing Ex. 1005, 25:23–24, 32:27–33, 40:33–45, 56:49–51). For these reasons, Petitioner has failed to show by a preponderance of the evidence that Kelly teaches or suggests limitation 1[f]. Accordingly, we find that Petitioner has failed to show that claim 1 would have been obvious over Kelly. 2. Claims 3–5, 12, 13, 18–20, 22, 24–26, 29, 42, 44–47, and 50 Claims 3–5, 12, 13, 18–20, 22, 24–26, 29, 42, 44–47, and 50 all depend from claim 1. See PO Resp. 16 (explaining that the arguments for independent claim 1 also apply to the dependent claims inherent the deficiencies asserted with respect to the independent claims). We find Patent Owner’s arguments availing, as explained above. Accordingly, we find that Petitioner has failed to show by a preponderance of the evidence that claims 3–5, 12, 13, 18–20, 22, 24–26, 29, 42, 44–47, and 50 would have been obvious over Kelly.” slip op. at 40

  Patent outcomesUS 8,529,336 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 8,529,336
• Abbott Laboratories v. Miracor Medical SANo claims unpatentable
  PTAB · Jun 11, 2026 · IPR2025-00116 · APJ John D Hamann · IPR · Final written decision

  The Board held claims 1–5, 7, 10, 16–24, 26, and 28 not unpatentable under any of the four § 103 grounds because the petition failed to prove required limitations.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “We find that the ’077 patent and the cited prior art references reflect the appropriate level of skill at the time of the claimed invention and that the level of skill reflected in these references and in the ’077 patent is consistent with the definition of one of ordinary skill in the art proposed by Petitioner, which we adopt. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). We further find that our determinations in this Decision would be the same if we were to instead adopt the level of skill proposed by Patent Owner.” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “We agree with Patent Owner that “axially adjacent” should be given its plain and ordinary meaning of “adjacent to one another as measured along a central axis.” PO Resp. 5–6; see also Ex. 2015 ¶¶ 73–79 (Mr. Leschinsky addressing the claim term “axially adjacent” and explaining that a person of ordinary skill would have understood it to mean that the “first magnetic device and the rotor are ‘adjacent’ to one another, i.e., disposed next to one another, as measured along the central axis about which the rotor spins”). Patent Owner’s construction also is supported by Petitioner’s expert, Mr. Crosby, who agrees that “adjacent to one another as measured along a central axis,” could be “one meaning,” along with “many other meanings.” Ex. 2014,8 19:13–20:11. In sum, consistent with our Institution Decision, we conclude that the plain and ordinary meaning of “axially adjacent” is “at a position adjacent to one another as measured along a central axis.” See Dec. on Inst. 12.” slip op. at 14

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “Second, for the reasons below, we determine that we do not need to construe any other claim terms to resolve the disputes between the parties. See, e.g., Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)) (“[W]e need only construe” slip op. at 14

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “We agree with Patent Owner. As we discuss above, we find “axially adjacent” to mean “adjacent to one another as measured along a central arguments that rest on Petitioner’s assertion that in the Parallel Litigation, Patent Owner “asserts that a magnetic element sealed within a rotor is . . . ‘axially adjacent.’” Id. at 20–21, n.6 (citing Ex. 1019, 5–7). In particular, we find unavailing Petitioner’s argument that Wampler teaches that magnetic pieces 88 (“a first magnetic device”) “are inserted [‘axially adjacent’] in…the impeller.” Id. at 20–21 (citing Ex. 1008 ¶ 80, Fig. 13; Ex. 1003 ¶ 174). We also find unavailing Petitioner’s reliance on Wampler’s Figure 13 and Mr. Crosby’s cited testimony that “the ‘impeller’ and ‘magnetic pieces’ are axially adjacent—situated next to each other on the same axis.” Id. at 21–22 (annotating Ex. 1008, Fig. 13; citing Ex. 1003 ¶¶ 174–176). Petitioner does not sufficiently explain this argument, but appears to conflate being adjacent along a central axis with about an axis. Id. We also find unavailing Petitioner’s argument that under Patent Owner’s construction, Wampler also teaches this limitation, because Patent Owner “concedes that ‘axially adjacent’ components ‘have positioning that is next to one another, perhaps touching or sharing a common side, when measured along the axis.’” Pet. Reply 14–15 (citing PO Resp. 14). Petitioner mischaracterizes Patent Owner’s arguments and ignores Patent Owner’s showing that “axially adjacent” components are “distinct from components that are aligned with one another such that they overlap or occupy the same portion of an axis upon which they are positioned.” PO Resp. 14 (citing Ex. 2015 ¶ 78). For the preceding reasons, Petitioner fails to show by a” slip op. at 24

  Patent outcomesUS 11,754,077 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 11,754,077
• Western Digital Technologies, Inc. v. Godo Kaisha IP Bridge 1No claims unpatentable
  PTAB · Apr 28, 2026 · IPR2024-01494 · APJ Justin T Arbes · IPR · Final written decision

  The Board found claims 5, 6, and 9–20 not shown unpatentable over either Bowen and Soukup or Nagahama and Soukup under § 103.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner argues that at the time of the ’909 patent (2004), a person of ordinary skill in the art would have had “a Ph.D. in electrical engineering, physics, materials science, or a related field, and at least one year of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent,” or “a Master’s degree in electrical engineering, physics, materials science, or a related field, and four years of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent,” where “[l]ess work experience may be compensated by a higher level of relevant education, and vice versa.” Pet. 18–19. In the Decision on Institution, we agreed with and applied Petitioner’s proposed definition. Dec. on Inst. 9. Patent Owner does not propose a different level of ordinary skill in the art in its Response. Both experts utilized Petitioner’s proposed definition. See Ex. 1024 ¶ 25; Ex. 2053 ¶¶ 29–30. Based on the full record developed during trial, including our review of the ’909 patent and the types of problems and solutions described in the ’909 patent and cited prior art, we maintain the previously adopted definition of the level of ordinary skill in the art and apply it for purposes of this Decision.” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “B. Claim Interpretation We interpret the claims of the challenged patent using the same claim construction standard that would be used to construe the [claims] in a civil action under 35 U.S.C. 282(b), including construing the [claims] in accordance with the ordinary and customary meaning of such [claims] as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent. 37 C.F.R. § 42.100(b). Petitioner argues that “the claim terms should be given their plain and ordinary meaning and no claim construction is necessary.” Pet. 15. We did not interpret any terms in the Decision on Institution. Dec. on Inst. 9–10. Patent Owner does not propose interpretations of any claim terms in its Response. We conclude, based on the full trial record, that no term requires express interpretation to determine whether Petitioner has met its burden to prove unpatentability of the challenged claims. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“Because we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy,’ we need not construe [a particular claim limitation] where the construction is not ‘material to the . . . dispute.’” (emphasis added) (citation omitted)).” slip op. at 8

  • Strike new argumentNew argument disregardedGranted in part

    “Pursuant to 37 C.F.R. § 42.23(b), “[a] reply may only respond to arguments raised in the corresponding . . . patent owner response.” “‘Respond,’ in the context of 37 C.F.R. § 42.23(b), does not mean proceed in a new direction with a new approach as compared to the positions taken in a prior filing.” Patent Trial and Appeal Board Trial Practice Guide § II.I, available at https://www.uspto.gov/patents/ptab/trial-practice-guide (last updated Dec. 12, 2025). “While replies . . . can help crystalize issues for decision, a reply . . . that raises a new issue or belatedly presents evidence may not be considered.” Id. An indication that a new issue is improperly raised in a reply is where a petitioner submits “new evidence necessary to make out a prima facie case” of unpatentability, such as a “newly raised rationale to combine the prior art references that was not expressed in the petition.” Id. That is the case here. Petitioner’s rationale in the Petition for why a person of ordinary skill in the art would have been motivated to lower Bowen’s 0.9 eV barrier height to 0.33 eV based on Soukup was that such an artisan would have expected lowering the barrier height to increase TMR. See Pet. 34–36. Faced with Dr. Bokor’s testimony on cross-examination, Petitioner presents a new theory in its Reply that a person of ordinary skill in the art would not have known what impact lowering the barrier height would have (increase TMR, decrease it, or have no impact at all), but would have expected it to change in some “uncertain” way, which is a “legally sufficient motivation” in Petitioner’s view. See Reply 6–10, 13–16, 23–25. In other words, “[r]ather than explaining how its original” position that lowering barrier height would increase TMR “was correct,” Petitioner articulated “an entirely new theory . . . absent from the [P]etition” after Patent Owner cross-examined Dr. Bokor and “pointed out the flaws of [Petitioner’s] position” in its Response. See Wasica Finance GmbH v. Continental Auto. Sys., Inc., 853 F.3d 1272, 1286 (Fed. Cir. 2017). “Shifting arguments in this fashion is foreclosed by statute, [Federal Circuit] precedent, and Board guidelines.” Id.” slip op. at 20

  • Expert testimonyPetitioner expert discountedPatent owner expert creditedDecided for patent owner

    “Ultimately, the cross-examination testimony above is inconsistent with Dr. Bokor’s opinions in his declaration that, for example, “[i]t was understood to one of skill that lowering the barrier height to increase tunneling would have increased the TMR,” and “[o]ne of skill would have been motivated to adjust oxygen vacancy defects to improve TMR by lowering the barrier height.” See Ex. 1024 ¶¶ 176, 277 (emphasis added); see also id. ¶ 172 (“[O]ne of skill in the art would have been motivated to use [Soukup’s 0.33 eV] or similar height in an MgO MTJ to improve tunneling and hence TMR in Bowen.”). Accordingly, we do not find Dr. Bokor’s declaration testimony regarding a motivation to lower Bowen’s barrier height credible. It is Petitioner’s burden to provide a reasoned, evidence-supported explanation for why a person of ordinary skill in the art would have been motivated to lower Bowen’s 0.9 eV barrier height to 0.33 eV as disclosed in Soukup. See NuVasive, 842 F.3d at 1383; Magnum Oil, 829 F.3d at 1380; TriVascular, 812 F.3d at 1066. Petitioner’s reasoning in the Petition that lowering the barrier height (by introducing oxygen defects) would increase TMR is unsupported by evidence.” slip op. at 31

  Patent outcomesUS 11,968,909 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,968,909
• Early Warning Services, LLC v. Intellectual Ventures II LLCNo claims unpatentable
  PTAB · Feb 11, 2026 · IPR2024-01221 · APJ Iftikhar Ahmed · IPR · Final written decision

  Petitioner failed to prove claims 1, 2, 4, 5, 7, 8, 12, 13, 17, 19–21, 23, 24, 26, 27, 29, 30, 34, 39–41, and 43 unpatentable because the cited grounds did not establish the required …

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “image capture device” refers to an imaging-based barcode reader and not a laser-based barcode scanner because we are persuaded that claim language and Specification support that interpretation and also because Patent Owner persuasively shows that a person of ordinary skill in the art would have understood the term as such. Claim 1 recites an “image capture device configured to capture an image.” Ex. 1001, 16:24–25. The plain meaning of the claim term requires that the image be captured, not just scanned. The claim further requires “generating an output based on the information embedded in the image,” requiring that information is retrieved from the captured image. Id. at 16:32–33. A device that does not capture an image is not an “image capture device” under the plain language of the claim. A laser-based barcode scanner employs light reflected from a laser beam to “generate an electrical signal that corresponds to the bars and spaces in the barcode being scanned.” See Ex. 2029 ¶¶ 42–43 (explaining in detail how laser-based barcode self-emitting a laser light across a code to be scanned, with a sensor tuned to capture the reflected light from the laser.”). It simply does not capture an image. slip op. at 14

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Based on our review of the complete record, we determine that Petitioner’s stated level of ordinary skill in the art is reasonable because it is consistent with the evidence of record, including the asserted prior art. The field of the ’167 patent “relates generally to secure transactions, and more specifically, to methods and devices for providing secure identification, verification, and authorization using a portable secure device.” Ex. 1001, 1:8–11. The ’167 patent seeks “to provide methods and devices that are capable of providing secure transactions in a more efficient manner.” Id. at 3:11–13. Accordingly, we adopt Petitioner’s definition. We note, however, that our patentability analysis would be the same under Patent Owner’s definition.” slip op. at 11

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “We agree with Patent Owner that Wang fails to disclose limitation 1[a]. Wang discloses a portable electronic authorization device (PEAD) that can be used as a self-checkout terminal. Ex. 1004 ¶ 115. In this context, Wang discloses By entering the UPC code or barcode using keypad on the PEAD or scanning in the UPC code or barcode using the input device built into the PEAD such as a barcode scanner or OCR reader, the PEAD can generate the receipt with the list of item prices through the wireless network and Internet by querying the item price using the barcode as the index for price lookup table which is Stored in a Server System. Id. (emphasis added). As discussed above (Section III.C.1), we are persuaded by Patent Owner’s arguments that the claimed “image capture device” refers to an imaging-based device and not a laser-based barcode scanner. Petitioner does not contend that Wang’s disclosure of the barcode scanner necessarily refers to an imaging-based device, but argues that Wang’s disclosure is sufficient because “both imaging-based barcode scanners and laser-based barcode scanners constitute image capture devices.” Reply 11. In light of our claim construction above, we disagree.” slip op. at 27

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “Petitioner contends that claims 1, 4, 5, 7, 12, 17, 23, 26, 27, 29, 34, and 43 are unpatentable as obvious over the combination of Wang and Drummond. Pet. 30–43. 1. Drummond Drummond is a patent titled “Automated Banking Machine System and Method,” and “relates to an automated banking machine apparatus and system that are capable of use in a wide area network, and which provides a user with a remote electronic receipt or other record related to a transaction performed at the machine.” Ex. 1008, code (54), ¶ 2. Drummond discloses that its automated banking machine, may “initiate the sending of a non-paper transaction receipt to the customer,” “[t]he receipt may be sent using a wide area network, such as the Internet,” and “[t]he receipt may be an electronic receipt, for example a receipt in the form of an e-mail message.” Id. ¶ 247. 2. Claims 1, 4, 5, 7, 12, 17, 23, 26, 27, 29, 34, and 43 For this obviousness ground, Petitioner relies on the same arguments and evidence as its Ground 1a (anticipation by Wang), discussed above, for the majority of claim limitations. See Pet. 33–43. Importantly, Petitioner relies solely on Wang as teaching independent claim limitations [1a], [23a], and [43b] relating to an image capture device and embedded information. Pet. 36, 41, 43. Accordingly, for the reasons discussed above with respect to Ground 1a, Petitioner has not established by a preponderance of the evidence, that the subject matter of claims 1, 4, 5, 7, 12, 17, 23, 26, 27, 29, 34, and 43 would have been obvious to one of ordinary skill in the art over the combination of Wang and Drummond.” slip op. at 31

  Patent outcomesUS 7,314,167 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 7,314,167
• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.No claims unpatentable
  PTAB · Dec 10, 2025 · IPR2024-01186 · APJ Brian D Range · IPR · Final written decision

  Claims 1–20 were not shown unpatentable because Kwatra does not teach or suggest minimizing rotational velocity and acceleration as required by the claims.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) would have the following characteristics: “a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing or digital cameras.” Pet. 6 (citing Ex. 1002 ¶¶ 36–37). Petitioner states that, “[a]lternatively, a POSITA would have four years of experience working on image or video processing 6 Patent Owner asserts objective evidence of nonobviousness. Prelim. Resp. 19–27. or digital cameras.” Id. Petitioner further contends “[a]n advanced graduate degree in the disciplines cited above may make up for the work experience indicated above.” Id. Patent Owner does not dispute the level of ordinary skill in the art. Prelim Resp. 14–15. For purposes of this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the ’894 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “Petitioner “does not believe any terms require a formal construction.” Pet. 6. Patent Owner agrees “no claim terms presently require construction to resolve any current dispute between the parties.” PO Resp. 15. We do not discern a need to construe explicitly any claim language at this juncture because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 11

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “Kwatra teaches, at Equation 7, minimizing velocity and acceleration of a function representing camera path (P). FF ¶¶ 6, 8–9. Kwatra does not state that this camera path function considers rotation. Rather, the words “camera path” suggest x, y, z movement of the camera rather than rotation of the camera. Dr. Foroosh’s testimony that Kwatra’s minimization of a smoothed camera path does not result in minimizing rotational velocity and acceleration is credible because this testimony is consistent with Kwatra as a whole and consistent with the other evidence of record. Id. ¶ 10. Kwatra recognizes that image rotation angle (“θ”) may not remain smooth. Id. ¶ 12. But rather than attempting to minimize velocity and acceleration of rotation of the camera housing, Kwatra states that applying a smoothness constraint on rotation angle “may be non-linear.” Id. ¶ 13. Consistent with Kwatra, Dr. Foroosh credibly explains the difficulty of applying linear techniques to rotation. Id. Thus, Kwatra proposes instead constraining the sine and cosine of theta. Id. ¶ 14. The Kwatra provisional application is part of the Kwatra reference (id. ¶ 15), and it similarly opts for simpler schemes rather than estimating all parameters for all frames jointly. Id. ¶ 16. The provisional explains that the rotational component is relatively small such that non-linear computations minimizing velocity and rotation can be avoided. Id. ¶¶ 17–18. The testimony of Patent Owner’s witness, Dr. Foroosh, explaining the provisional is credible (Ex. 2018 ¶ 72) because it is consistent with Kwatra’s complete disclosure. Dr. Foroosh’s testimony is more credible than the testimony of Petitioner’s witness, Dr. Katsaggelos, because Dr. Katsaggelos did not review the Kwatra provisional application and, thus, did not review the entire disclosure of Kwatra. Id. ¶ 19; see also In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc) (obviousness analysis considers whether “the claimed inventions are rendered obvious by the teachings of the prior art as a whole” (emphasis added)).” slip op. at 28

  • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

    “(id. ¶ 15), and it similarly opts for simpler schemes rather than estimating all parameters for all frames jointly. Id. ¶ 16. The provisional explains that the rotational component is relatively small such that non-linear computations minimizing velocity and rotation can be avoided. Id. ¶¶ 17–18. The testimony of Patent Owner’s witness, Dr. Foroosh, explaining the provisional is credible (Ex. 2018 ¶ 72) because it is consistent with Kwatra’s complete disclosure. Dr. Foroosh’s testimony is more credible than the testimony of Petitioner’s witness, Dr. Katsaggelos, because Dr. Katsaggelos did not review the Kwatra provisional application and, thus, did not review the entire disclosure of Kwatra. Id. ¶ 19; see also In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc) (obviousness analysis considers whether “the claimed inventions are rendered obvious by the teachings of the prior art as a whole” (emphasis added)).” slip op. at 28

  Patent outcomesUS 10,574,894 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,574,894
• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, IncNo claims unpatentable
  PTAB · Nov 25, 2025 · IPR2024-01165 · APJ William V Saindon · IPR · Final written decision

  Claims 1–21 were not shown unpatentable because Zhou does not teach the claimed low-light high-pass or stickiness parameter limitations.

  RulingsFinal written decision

  • BurdenFwd all claims patentableNot shown unpatentable

    “4. Conclusion for the Prior Art Analysis In sum, we find that Zhou does not disclose the low-light high-pass parameter or the stickiness parameter. Petitioner’s grounds for both independent claims 1 and 16 rely on Zhou for teaching a low-light high-pass parameter or a stickiness parameter. Pet. 23–28, 64. Because we find Zhou does not teach these limitations, all of Petitioner’s grounds fall for this reason. III. CONCLUSION For the reasons given above, we determine that Petitioner has not established by a preponderance of the evidence that any claim of the ’840 patent would have been obvious in view of the prior art cited.” slip op. at 18

  • Skill levelSkill level petitioner adoptedOther

    “A person of ordinary skill in the art (POSITA) in the field of the ’840 patent would have a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing, or digital cameras. Alternatively, a POSITA would have four years of experience working on image or video processing, or digital cameras. An advanced graduate degree in the disciplines cited above may make up for the work experience indicated above. Pet. 6 (citing Ex. 1002 ¶ 32). Patent Owner applies the same standard. PO Resp. 26–27. We use this agreed-upon standard for purposes of this Decision.” slip op. at 7

  • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

    “We review this testimony based on the strength of the underlying factual basis. 37 C.F.R. § 42.65(a); Ashland Oil, Inc. v. Delta Resins & Refractories, Inc., 776 F.2d 281, 294 (Fed. Cir. 1985) (“Lack of factual support for expert opinion going to factual determinations, however, may render the testimony of little probative value . . ..”). Here, the underlying factual basis is not very strong for either witness. That said, we find that Dr. Foroosh’s testimony is more logically sound and consistent with the ’840 patent disclosure. Based on our reading of the specification, we find a clear indication that “stickiness” has to do with the past. In order to control “the extent by which preceding portion(s) . . . impacts determination of the smoothed trajectory” (emphasis added), one must control the degree by which the past frames impact determination. And to control the degree of the past’s influence, one must, as a consequence, favor the past over the future. That is, the frame of reference of the stickiness parameter is the past. The specification could have used a time-agnostic term, like a “nearness” or “adjacency” parameter, but it did not. Thus, the fact that “stickiness” is used in conjunction with “preceding” indicates that it deals with a preference for preceding frames. On this basis, we find Dr. Katsaggelos’s testimony less persuasive than Dr. Foroosh’s.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “That said, we do not construe a stickiness parameter as prohibiting consideration of future frames. Instead, we determine that the stickiness parameter’s value determines the impact of the preceding portions, versus the following portions. The ’840 patent recognizes this, when it says that a stickiness parameter value of “1,” representing a “lazy” stabilizer that maximally favors the past, would not override a violation of the margin constraint based on the look-ahead (i.e., would not allow the viewing window to fall out of bounds in the event of large future motion). See Ex. 1001, 22:26–30; see also id. at 12:61–13:29 (acknowledging that favoring the past may lead to a conflict with the viewing window determination), 15:39–60 (adjusting the viewing window to ensure it does not violate a margin constraint). Thus, while a past-favoring parameter by necessity favors the past over the future, it does not prohibit consideration of the future. In view of the above, we construe the claimed “stickiness parameter” as a parameter that controls the extent by which preceding portions of the trajectory impacts determination of the smoothed trajectory, with an understanding that in order to favor preceding portions, to some extent, the parameter must relatively disfavor following portions.” slip op. at 10

  Patent outcomesUS 10,958,840 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,958,840
• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, IncNo claims unpatentable
  PTAB · Nov 25, 2025 · IPR2024-01164 · APJ William V Saindon · IPR · Final written decision

  Claims 1–21 were not shown unpatentable because Shi does not disclose the claimed low-light high-pass parameter required by the asserted obviousness grounds.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “Given the teachings of the specification, we agree with Patent Owner that a low-light high-pass parameter is a parameter of a smoothing function that favors high frequencies (high pass) when exposure times are long (low light). See Tr. 42:10–18 (Patent Owner’s counsel stating that “high-pass” means “there’s a bias or preference for high frequencies”); Ex. 2020, 93:23– 94:15 (Petitioner’s declarant, Dr. Katsaggelos, agreeing that a high-pass system attenuates the low frequency of a signal). Although we acknowledge Petitioner’s position that the specification provides other ways or considerations in implementing a smoothing function, based on our above analysis of the specification, we find that the specification describes the lowlight high-pass parameter as a specific component of a smoothing function. See, e.g., Ex. 1001, 21:17–25 (setting out several parameters besides the low-light high-pass parameter used in trajectory smoothing).” slip op. at 10

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “position and a real device position. Id. at 18:27–40. In other words, the blur is addressed by analyzing the image to identify motion and then shifting the image. Shi, however, does not disclose how its parameter is based on low light (or the long exposure times indicative of low light). In its Petition, Petitioner asserts that a person of ordinary skill in the art would understand that “blurs can be caused by low light conditions.” Pet. 28 (citing Ex. 1003 ¶ 111). Although this is true, that does not mean that Shi’s blurs are identified by a parameter that considers low light. As we just described, Shi identifies the blur by quantifying the amount of motion of the points in an image, not by identifying low light. This is simply a different way to determine the presence of motion blur. In Shi, blur is measured, whereas in the ’840 patent, it is inferred based on low-light conditions (e.g., by observing the exposure time). See, e.g., Ex. 1007, 18:7– 26; Ex. 1001, 19:12–26. In its Reply, Petitioner does not point to any further disclosures. Accordingly, we find that Shi does not disclose the “low-light” aspect of the claimed low-light high-pass parameter. This is sufficient to determine that Petitioner’s ground does not meet all claim limitations. Similarly, we find that Shi does not disclose the “high-pass” aspect of the parameter. Shi’s blur compensation uses a spherical interpolation to modify the image. Ex. 1007, 18:27–40. The low-light high-pass parameter, as we have construed the term, allows more high frequencies. To allow more high frequencies, this necessarily means either allowing fewer low frequencies, or allowing more high frequences as opposed to some counterfactual situation in which fewer high frequencies were going to be allowed. See Ex. 2020, 94:23–95:15; Ex. 2022. We are directed to no persuasive evidence from Petitioner that Shi’s spherical interpolation favors high frequencies over low frequencies. Accord Ex. 2018 ¶ 107 (Patent Owner’s expert stating that Shi’s spherical interpolation “reintroduce[es] both high- and low-frequency motion”). Even if Shi allows the viewing window to track the camera position “consistent with the natural blur in the image” (Ex. 1007, 17:63–67), we are not provided with sufficient evidence to conclude by a preponderance of the evidence that providing a similar visual goal as a high-pass parameter (Ex. 1001, 22:16–18, “the output motion may include high frequencies that mask motion blur”) is the same as having a high-pass parameter. Again, merely preserving high frequencies is not the same as having a “high-pass parameter” because, as construed, a “high-pass parameter” also involves some degree of attenuation of low frequencies or relative increase of high frequencies. Accordingly, we find that Shi does not disclose the “high-pass” aspect of the claimed low-light high-pass parameter.” slip op. at 18

  Patent outcomesUS 10,958,840 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,958,840
• DBR Finance, Inc. v. Rugged Cross Hunting Blinds, LLCNo claims unpatentable
  PTAB · May 29, 2025 · IPR2024-00291 · APJ Cynthia L Murphy · IPR · Final written decision

  The Board held claims 1–19 not unpatentable because Petitioner did not prove the proposed Whybrew–Strength combinations disclosed the claimed mesh panels with spaced holes.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “We question, therefore, whether someone having an education in textile engineering or physics, but no experience in the field of hunting blinds, would be consistent with the level of skill portrayed by the ’535 Patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). We note that Petitioner’s expert’s experience, education, and qualifications are rooted in textiles, fibers and physics, and sophisticated subjects related thereto. See Ex. 1007 ¶¶ 14–20. But his deposition revealed that he has little or no experience in the field of hunting blinds. See Ex. 2038, 8–14.5 5 The same might be said of Patent Owner’s expert. See Ex. 2031, ¶¶ 6–7; Ex. 1023, 16. However, our obviousness analysis leaned lightly, if at all, on her declarations and testimony.” slip op. at 12

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionDecided for petitioner

    “1. Mesh Material In the Petition, Petitioner asks that “the term ‘mesh material’” be interpreted in accordance with “a plain and ordinary usage.” Pet. 25. Per Petitioner, the “plain and ordinary” meaning of the term “mesh material” is “a woven material of open texture with spaced holes therein.” Id. Per Petitioner, “[o]ther typical terms used to describe a mesh-like material” are “a screen material, or a netting material, which are believed to be synonyms.” Id. Patent Owner does not dispute that a mesh material would have an open texture with spaced holes therein. See PO Resp. 18. We find that Petitioner’s proposed construction aligns with the ’535 Patent’s specification. See Ex. 1001. The drawings in the ’535 Patent depict the mesh material 26 as having an array of uniformly spaced circular holes forming a net-like structure (see id., Fig. 1A, 1B, 4, 9) or an array of uniformly spaced rectangular openings (see id. Fig. 8) forming a screen-like structure. The embodiments of the mesh material 26 listed in the ’535 Patent (e.g., a mesh banner material, scrims, a network of fibers, etc.) are materials having net-like or screen-like structures. See id. at 6:47–7:28.6” slip op. at 14

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “Our construction aligns with the claim language; Petitioner’s proposed construction does not. See Ex. 1001, 10:4–19. The independent challenged claims set forth “one or more panels of mesh material” and then set forth “said one or more panels comprising: a first side with a camouflage pattern; and a second side with a dark color coating.” Id. at 10:4–11. The recited “said one or more panels” corresponds to the previously recited “one or more panels of mesh material,” not panels comprising a material that was only a “mesh” prior to printing/coating. See id. Also, the independent challenged claims set forth that “the one or more panels of the mesh material define an outer surface of the camouflage structure.” See id. at 10:18–19, 1:23–24 (emphasis added). And the panel(s) defining a hunting blind’s outer surface would include the dark color coating. Our construction aligns with the ’535 Patent’s specification; Petitioner’s proposed construction does not. See Ex. 1001. The ’535 Patent repeatedly describes the relevant panel material in the hunting blind (i.e., post printing/coating) as a mesh material. See id., Abst., 1:19–5:34, 6:47–7:28, 9:16–54, Figs. 1A, 1B, 9. The ’535 Patent expressly describes and depicts the mesh material 26 as including the camouflage pattern and the dark-color coating. See id. at 1:52–56, 3:24–25, 3:31–33, Figs. 1A, 1B. The ’535 Patent says that “panels” of this coated mesh material 26 “are used to form” a hunting blind. Id. at 3:22–26. The ’535 Patent says that “[m]esh material is presented for a hunting blind with a camouflage pattern printed on a first side and a second side with a color coating.” Id. at Abst. The ’535 Patent says that “mesh material of interwoven fabric is provided for a hunting blind including a camouflage pattern printed on a first side and a second side with a dark color coating.” Id. at 1:19–22; see also id. at 1:44–49. Our construction aligns with the ’535 Patent’s prosecution history; Petitioner’s proposed construction does not. See Ex. 1006. As mentioned above, throughout prosecution of the ’535 Patent, the same prior art material was mapped to the claimed panel(s) of mesh material. See Ex. 1006, 64–72, 122–106. The mapped-to prior art mesh material was described during prosecution as an “interwoven fabric” with “a pattern” printed on a first side and “a dark color coating” on a second side. Ex. 1006, 64; see also id. at 122. And the mapped-to prior art mesh material (i.e., which included not only the interwoven fabric but also the printed pattern and the dark color coating) had a “net-like structure” with an array of uniformly spaced “net holes” that are “not closed.” Ex. 2021, 4:1–5, see also id. at 2:58–3:6, 4:34–45, Figs. 1, 2a. Thus, we understand that claimed panel(s) of mesh material must have” slip op. at 17

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableNot shown unpatentable

    “However, Patent Owner does not bear the burden of proving Strength’s camouflage material 10 does not have holes. Rather, Petitioner bears the burden of proving that Strength’s camouflage material 10 does have holes. And Petitioner’s arguments that undermine Patent Owner’s position that Strength’s camouflage material 10 does not have holes, concurrently undermine Petitioner’s position that Strength’s camouflage material 10 does have holes. Per Petitioner, “Strength is silent on whether visible holes exist in the fabric” (Pet. Reply 8) and “the Strength reference doesn’t discuss anything about holes” (Tr. 14). Petitioner’s expert testified that it was his “understanding that Strength is silent” on “whether or not there are holes.” Ex. 2038, 44. Petitioner contends that Strength’s silence about the presence/ absence of holes hinders Patent Owner from proving that Strength’s camouflage material 10 does not have holes. See Pet. Reply 8. We agree. But this same silence likewise hinders Petitioner from proving that Strength’s camouflage material 10 does have holes.” slip op. at 35

  Patent outcomesUS 11,399,535 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,399,535
• Hesai Technology Co., Ltd. v. Ouster, Inc.No claims unpatentable
  PTAB · Mar 13, 2025 · IPR2023-01422 · APJ Jon M Jurgovan · IPR · Final written decision

  The Board held claims 1–2, 4–9, 11–14, 16–17, and 19–25 not shown unpatentable over the asserted obviousness grounds, principally because the combinations lacked claimed limitations.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for patent owner

    “Considering the applicable factors in light of the parties’ contentions, we adopt the following level of ordinary skill in the art, which we apply in this Decision: A person of ordinary skill in the art would have had an undergraduate degree in mechanical or electrical engineering and two to three years of work experience with electro-optical and electro-mechanical devices or systems, relevant to light ranging systems. Less work experience would have been compensated by a higher level of education or vice versa. The work experience would have included at least one year relevant to light ranging systems including LIDAR with a rotor-stator structure. We determine that this level of skill is consistent with the problems and solutions identified in the ’515 patent and the prior art. See, e.g., Okajima v. Bourdeau, 261 F.3d 1350 (Fed. Cir. 2001); Ex. 1001, 1:30–3:48; Ex. 1004 ¶¶ 3–10; Ex. 1005, 1:1–2:31; Ex. 1006, 1:1–2:60; Ex. 1007, 1. We also determine that the proposed level of skill is reflective of the education and experience a person of ordinary skill would have had. Ex. 1003 ¶¶ 39–41; Ex. 2004 ¶¶ 67–68.” slip op. at 19

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “We determine that the claimed “stator circuit board” and “stator assembly” are separate and distinct elements in claims 1 and 14 because they are set forth as separate elements in these claims. See Ex. 1001, 48:27–29, 48:37–42, 50:8–10. Similarly, claim 22 recites “a stator circuit board assembly” that includes as subcomponents “a first circuit board,” “a second circuit board,” and a “stator assembly” which are separate and distinct subelements. Id. at 51:49–59. “Where a claim lists elements separately, ‘the clear implication of the claim language is that those elements are ‘distinct component[s]’ of the invention.” Becton, Dickinson and Co. v. Tyco Healthcare Gr., LP, 616 F.3d 1249, 1254 (Fed. Cir. 2010) (citing Gaus v. Conair Corp., 363 F.3d 1284, 1288 (Fed. Cir. 2004); Engel Indus., Inc. v. Lockformer Co., 96 F.3d 1398, 1404–05 (Fed. Cir. 1996)). This construction is confirmed by the ’515 patent’s specification. For example, the specification states that stator assembly 644 is affixed to circuit board 622, and, consistent with this statement, Figures 6A and 6D show them as separate elements joined together. Ex. 1001, 28:28–31, 30:16–24. Contrary to Petitioner’s contention, the specification’s stating that the stator elements are “built onto” or “integrated on” circuit boards (or assemblies containing them) does not mean that the stator assembly and circuit board are the same thing. Pet. Reply 1 (citing Ex. 1001, 4:19–22, 4:28–31). Rather, the specification describes the stator elements as part of the stator assembly which is coupled to a circuit board, as follows: VII. Integrated Electric Motor According to certain embodiments, an electric rotary motor can be integrated directly onto the circuit boards. The motor can have a "pancake" or "axial" design having a planar rotor assembly on a rotor board that opposes a planar stator assembly on an opposing stator board. The stator and rotor assemblies of the electric motor can be integrated onto the boards of the rotary actuator 608, i.e., the elements of the electric motor are one of many components on the surface of the printed circuit boards and thus a separate motor module is not required for LIDAR system 600. For example, referring back to FIG. 6D, stator assembly 644 can include an annular arrangement of multiple stator elements 644(i), e.g., vertically oriented solenoids (having their longitudinal axes perpendicular to the surface of the board) that are affixed (e.g., using an adhesive) to a board of the lower circuit board assembly 620 (e.g., board 622) or to a soft magnetic core that is then affixed to the lower circuit board assembly 620. Ex. 1001, 30:16–22. Thus, the ’515 patent’s specification expressly states that the stator elements of the stator assembly can be affixed to a printed circuit board, and thus the stator assembly is not the same thing as the board. Other parts of the specification are consistent with this view. See, e.g., id. at 4:54–57, 5:14–18, 6:50–53, 16:22–25.” slip op. at 23

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “We have construed claim 1’s limitation 1(g) to require “stator circuit board” and “stator assembly” that are separate and distinct elements. See § III.C.1, supra. Johnson discloses coil windings that are formed by patterning interleaved structures in a multi-layered printed circuit board (PCB) forming the stator platform 330, and interconnecting them in groups with vias filled with conductive material. Ex. 1005, 11:66–13:57. Figs. 3C–3D; Ex. 2004 ¶¶ 138–139. We agree with Patent Owner that a POSITA would have considered the coil windings to be subcomponents of Johnson’s stator platform 330, which do not define a separate and distinct “stator assembly . . . coupled to a stator circuit board.” Ex. 2004 ¶ 139. In other words, the “printed” conductive tracks and traces would have been considered part of the PCB, not something separate. Id. Although Petitioner contends that Johnson discloses other embodiments in which a stator assembly is comprised of wires wound around a magnetic core (Pet. Reply 14–15 (citing Ex. 1005, 3:30–39, 4:56– 5:7; Ex. 1050 ¶ 30)), Petitioner does not show that Johnson discloses that those embodiments are coupled to a stator circuit board as recited in claim 1’s limitation 1(g). Petitioner did not rely on Pacala, Pardhan, nor Zhang to cover the deficiencies of Johnson. Accordingly, for the above reasons, we determine that Petitioner has” slip op. at 41

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

    “Patent Owner’s arguments are persuasive. Johnson, Pardhan, and Zhang all disclose transformer coils positioned inside of the rotor/stator elements of the motor. Specifically, Johnson’s Figure 3B shows a transformer coil 310b positioned inside rotor elements (magnets 320, 322, 324, 326), and Figure 3C shows the corresponding transformer coil (unnumbered) inside of the stator coils defined by conductive structures. Ex. 1005, 11:51–60, 13:26–40. Similarly, Pardhan shows in Figure 7B a transformer 740a, 740b positioned inside of rotor/stator elements 738a, 738b, and suggests that a smaller rotary transformer is desirable. Ex. 1006, 20:64–21:13. Likewise, Zhang’s Figures 2 and 3 show an electrical power transmission unit including first coupling coil (5) and second coupling coil (unnumbered) positioned inside of motor coil (2). Ex. 1007, 4–5. Against the teachings of Johnson, Pardhan, and Zhang, Petitioner argues that putting the transformer coils outside of the stator coils would have been an obvious design choice. Pet. 50–51, 54–55. However, as Patent Owner noted, “merely stating that a particular placement of an element is a design choice does not make it obvious.” PO Resp. 50 (citing Polaris Indus., Inc. v. Arctic Cat, Inc., 882 F.3d 1056, 1067–70, 1069 n.4 (Fed. Cir. 2018); Ex. 2004 ¶ 186). That Johnson, Pardhan, and Zhang all disclose the transformer coils inside of the rotor/stator elements of the motor suggests that there were good reasons for doing this in their configurations. Zhang expressly teaches that one such reason is to avoid interference with power transmission.15 Ex. 1007, 3. Thus, according to Zhang, moving transformer coils outside of the rotor/stator elements in Petitioner’s combination would undesirably interfere with power transmission such that a POSITA would not have pursued the combination. Accordingly, we find that claim 22’s limitation 22(h) is missing from the combination of Pacala, Johnson, Pardhan, and Zhang.” slip op. at 53

  Patent outcomesUS 11,287,515 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,287,515

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.