- Apple Inc. v. Ferid AllaniInstitution deniedPTAB · Nov 4, 2025 · IPR2025-00856 · APJ Jameson Lee · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–19 were obvious over the asserted prior-art combinations.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“review. See 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a). An inter partes review may not be instituted unless the information presented in the Petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). The “reasonable likelihood” standard is “a higher standard than mere notice pleading” but “lower than the ‘preponderance’ standard to prevail in a final written decision.” Hulu, LLC v. Sound View Innovations, LLC, IPR2018-01039, Paper 29 at 13 (PTAB Dec. 20, 2019) (precedential). We determine Petitioner has not demonstrated a reasonable likelihood that it would prevail in establishing the unpatentability of at least one of challenged claims 1–19 of the ’877 patent. Accordingly, the Petition is denied, and no trial is instituted.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner asserts that a person of ordinary skill at the pertinent time “would be a person with a bachelor’s degree in computer science, computer engineering, or a closely related discipline and two years of relevant professional experience in software engineering or a similar field.” Prelim. Resp. 10. We adopt Petitioner’s statement of the level of ordinary skill in the art. It is supported by the testimony of Dr. Bederson. Ex. 1003 ¶¶ 32–33, 37–39. Although Patent Owner has proposed a slightly different statement for the level of ordinary skill in the art, Patent Owner does not explain why Petitioner’s proposal is incorrect. We find Petitioner’s proposed level presents a better statement of the level of ordinary skill in the art because it requires experience with web-based information systems and Patent Owner’s proposal does not. As noted above, the ’877 patent relates to a method for accessing information sources and services on the Web. Ex. 1001, 2:4–12. Further, Petitioner’s proposal appears consistent with what is reflected by the content of the applied prior art. Cf. Okajima v. Bourdeau, 261 F.3d 1350, 1354–55 (Fed. Cir. 2001) (the applied prior art may reflect an appropriate level of skill). B.” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“We need not resolve the above-identified dispute, because a different aspect of “beforehand locally stored” is determinative. Read in context, “beforehand locally stored” in both limitations 1(a)(2) and 12(a) refer back to the “preliminary search” action recited in limitation 1(a)(1) and in limitation 12(a) itself, respectively. Thus, we construe “beforehand locally stored” to mean that the selection pages must already be stored within the communication device when the user begins the preliminary search, regardless of whether it was the user or an automated process that downloaded the selection pages to the communication device. This understanding stems from a plain reading of the claim language and does not leave room for reasonable doubt otherwise. Petitioner does not present any reason why the claims do not require the selection pages to have already been stored in the communication device when a user begins the preliminary search. C.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached
“of the language in these limitations is that the selection pages must be beforehand locally stored, where beforehand is assessed at the time of starting a preliminary search. Based on this construction, Petitioner has not sufficiently shown that Rossman discloses limitation 1(a)(2) and limitation 12(a), even for institution purposes. Petitioner identifies Rossmann’s cards as the claimed selection pages of claims 1 and 12. Pet. 18–19. Rossmann’s cards, however, are not beforehand locally stored on the communication device at the time a user begins a preliminary search for information. Rather, on the record before us, at the time of starting a search for information, the user must request a connection to a server device at a desired host site, which request results in the server device at the host site sending one or more decks each including a plurality of cards to the user’s mobile device. Ex. 1004, 6:26–29; 7:22–27; 7:56–66. Thus, Rossmann’s cards are not beforehand locally stored at the time the user commences a preliminary search. Petitioner’s reliance on Himmel and on King do not make up for this deficiency.” slip op. at 14
Claim construction§ 103 obviousnessPatents in suitUS 8,271,877 - Solus Advanced Materials Co., Ltd. v. SK Nexilis Co., Ltd.Institution deniedPTAB · Apr 25, 2025 · IPR2024-01462 · APJ Jo-Anne M Kokoski · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–8 were unpatentable under the asserted obviousness grounds.
RulingsInstitution decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“experience working on the development of materials or components for electronic devices such as batteries.” Pet. 2. Petitioner further contends that “[a]dditional education, such as a graduate degree, could compensate for less work experience, and additional work experience could compensate for less formal education.” Id. Patent Owner states that, “[f]or purposes of this Preliminary Response, Patent Owner applies Petitioner’s level of skill for a person of ordinary skill in the art.” Prelim. Resp. 4. For purposes of this Decision, we adopt Petitioner’s undisputed proposed definition because it appears to be consistent with the cited prior art and the disclosure of the ’014 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their plain and ordinary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. Realtime Data LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). in this proceeding.” Pet. 3. Patent Owner contends that “[t]he Board need not construe any term in order to determine that institution should be denied.” Prelim. Resp. 4. Based on the record before us, we determine that no claim term requires express construction for purposes of this Decision. See Realtime Data, 912 F.3d at 1375.” slip op. at 8
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“For these reasons, we are not persuaded that Petitioner sufficiently establishes that a POSITA would have been motivated to modify Hanafusa in light of Dobashi with a reasonable expectation of success as Petitioner contends. Accordingly, we determine that Petitioner fails to demonstrate a reasonable likelihood of prevailing in its assertion that the subject matter of claim 1, and claims 4 and 8 that depend therefrom, would have been obvious over the combined teachings of Hanafusa and Dobashi.” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“Petitioner also focuses on Hanafusa’s teaching that all known methods can be used to make a rough surface low-profile, and Dobashi’s teaching that RSm can be used as an indicator for judgment of the surface, to support its contention that a POSITA would have been motivated to apply Dobashi’s RSm to further achieve Hanafusa’s purpose, without explaining how and why that would be the case. In particular, neither Petitioner nor Dr. Josefowicz adequately explain why a POSITA looking for ways to make Hanafusa’s surface roughness low-profile would look to methods to achieve as the period of waviness, RSm can also be used as an indicator for judgment of the surface.” Ex. 1005, 2:66–3:1, 6:23–26. Dobashi explains that waviness is “an indicator for determining whether the fine pattern forming performance is good or bad,” and “[t]he surface has small waviness and is smooth when RSm is large, and the surface has large waviness and is rough when RSm is small.” Id. at 3:1–3, 6:27–29. Dobashi also teaches that surface roughness Rzjis is used as a low-profile indicator. Ex. 1005, 2:66– 3:1. Dobashi, therefore, teaches that RSm is an indicator of surface waviness, which Dobashi explains is different than surface roughness. Id. at 2:66–3:3, 6:23–29. Given these teachings in Dobashi, neither Petitioner nor Dr. Josefowicz sufficiently explains how or why a POSITA would have been motivated to implement Dobashi’s RSm values to make Hanafusa’s surface roughness low-profile. See Pet. 10–12; Ex. 1003 ¶¶ 46–52.” slip op. at 14
Claim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 11,346,014 - Solus Advanced Materials Co., Ltd. v. SK Nexilis Co., Ltd.Institution deniedPTAB · Apr 23, 2025 · IPR2024-01461 · APJ Jo-Anne M Kokoski · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–10 were unpatentable over either asserted § 103 ground.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Institution of an inter partes review is authorized by statute when “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314 (2018); see also 37 C.F.R. § 42.4 (2023). For the reasons discussed below, we deny the Petition and do not institute an inter partes review.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“II. ANALYSIS A. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art (“POSITA”) “would have had at least an undergraduate degree in materials science, chemical engineering, electrical engineering, or related field, or equivalent knowledge, training, or experience, with at least two years of experience working on the development of materials or components for electronic devices such as batteries.” Pet. 4. Petitioner further contends that “[a]dditional education, such as a graduate degree, could compensate for less 7 We refer to the page numbers added by Petitioner to the bottom-center of the page. formal education.” Id. (citing Ex. 1003 ¶ 10). Patent Owner states that, “[f]or purposes of this Preliminary Response, Patent Owner applies Petitioner’s level of skill for a person of ordinary skill in the art.” Prelim. Resp. 4. For purposes of this Decision, we adopt Petitioner’s undisputed proposed definition because it appears to be consistent with the cited prior art and the disclosure of the ’689 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163–64 (Fed. Cir. 1985))).” slip op. at 10
- Expert testimonyPetitioner expert discountedDecided for patent owner
“We are not persuaded, on this record, that Petitioner adequately establishes that Khatibi discloses a CTE in the claimed range of 16 to 22 µm/(m·°C.). Petitioner’s argument that Khatibi’s reported values meet this claim limitation are based solely on Dr. Randall’s testimony that Khatibi’s measurement method would produce results that would not significantly differ from results determined using the claimed method. See Pet. 16–18 (citing Ex. 1003 ¶¶ 56–60). Dr. Randall’s testimony, however, is largely conclusory and unsupported by adequate explanation and/or objective evidence. For example, Dr. Randall does not provide adequate explanation or objective evidence to support his opinion that Khatibi’s use of a laser speckle based dilatometer instead of the claimed thermomechanical analyzer “is unlikely to significantly impact the CTE value” because “variations in equipment and a heating speed of 5° C/min would not significantly alter the results.” Ex. 1003 ¶ 58. In particular, Dr. Randall neither explains what constitutes a “significant” impact on CTE, nor provides objective evidence to support his contention that equipment variations and heating differences would not “significantly alter” the resulting measurements. And although Dr. Randall opines that “the heating rate (5°C per minute) is typical for certain devices” such as a thermomechanical analyzer or dilatometer, and “[t]ypically, these devices use temperature ramp rates between 2°C and 20°C per minutes, so the ‘5° C./min’ recited in [1d] is common and should not drastically affect the measurement results,” Dr. Randall fails to point us to any evidence showing that these temperatures are “typical” or that the claimed heating rate is “common.” Id. ¶ 59 (emphases added). to little weight. See 37 C.F.R. § 42.65(a) (“Expert testimony that does not disclose the underlying facts or data on which the opinion is based is entitled to little or no weight.”); Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 12 at 5 (PTAB Feb. 10, 2023) (finding that “the Board was correct in giving little weight to Petitioner’s expert because the expert declaration merely offered conclusory assertions without underlying factual support”); Upjohn Co. v. Mova Pharm. Corp., 225 F.3d 1306, 1311 (Fed. Cir. 2000) (“Lack of factual support for expert opinion to factual determinations, however, may render the testimony of little probative value in a validity determination.” (quoting Ashland Oil, Inc. v. Delta Resins and Refractories, Inc., 776 F.2d 281, 294 (Fed. Cir. 1985))); see also In re Ethicon, Inc., 844 F.3d 1344, 1348, 1352 (Fed. Cir. 2017) (concluding that the Board properly gave “little weight” to conclusory expert testimony of objective indicia). Because Petitioner offers Dr. Randall’s testimony to supply a limitation missing from the prior art, namely, the CTE measurement method, and we give Dr. Randall’s unsupported and conclusory testimony little weight, we are not persuaded that Petitioner establishes a reasonable likelihood of showing that Khatibi discloses limitation [1d].” slip op. at 17
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“second surfaces of the electrolytic copper foil ranges from 3 to 92.” Ex. 1001, 13:62–63. Petitioner contends that “Kim teaches that the electrolytic copper foil (e.g., untreated or treated copper foil) having Rz less than 2 µm is advantageous toward battery efficiency and performance,” and, similarly, Griesi describes the use of untreated electrolytic copper foil with an Rz value less than 2 µm in printed circuit boards that are compatible with secondary batteries. Pet. 58–59 (citing Ex. 1012, claim 2, ¶¶ 13, 25, 27; Ex. 1003 ¶ 157). In particular, Petitioner notes that Griesi’s Figure 3.16 describes an “Rz value of 1.2 µm.” Id. at 59 (citing Ex. 1015, 53–54; Ex. 1003 ¶ 158). Petitioner asserts that “Dr. Randall explains that a POSITA would have also recognized another surface roughness-related parameter, Rpc, in Griesi as a potentially useful parameter that can be optimized to further enhance uniformity or generally improve Kim’s copper foil surface, for example, to prevent wrinkles or achieve other advantageous effects.” Id. (citing Ex. 1003 ¶ 159). Although Dr. Randall demonstrates that Griesi’s Pc (or Rpc) value is 19.2 over a 4 mm sampling length (Ex. 1003 ¶ 155), Petitioner does not contend that Griesi addresses this value, or indicates any benefit that might be derived from its use. Instead, Griesi’s Pc value appears to be an incidental finding, which is not discussed or analyzed in the reference. See incidental, unexamined finding would lead a POSITA to import Griesi’s Pc value into Kim’s copper foil, absent a hindsight desire to reconstruct the claimed invention. As such, Petitioner’s arguments with respect to Kim and Griesi are not persuasive. See Cheese Sys. Inc. v. Tetra Pak Cheese and Powder Sys., Inc., 725 F.3d 1341, 1352 (Fed. Cir. 2013) (“Obviousness cannot be based on the hindsight combination of components selectively culled from the prior art to fit the parameters of the patented invention.” (internal quotations marks omitted)). Thus, we are not persuaded, on this record, that the combined disclosures of Kim and Griesi teach all of the elements of limitation [1g].” slip op. at 23
§ 103 obviousnesscites PhillipsPatents in suitUS 10,811,689 - Solus Advanced Materials Co, Ltd. v. SK Nexilis Co., Ltd.Institution deniedPTAB · Apr 22, 2025 · IPR2024-01460 · APJ Jon B Tornquist · IPR · Institution
The Board denied institution of review of claims 1–11 because the Fintiv factors, including the early trial date and close merits case, favored discretionary denial.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied fintivInstitution denied
“whether to institute an inter partes review. Applying the standard set forth in 35 U.S.C. § 314(a), we may not institute an inter partes review unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Institution of inter partes review, however, is discretionary. See Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1367 (Fed. Cir. 2016) (“[T]he PTO is permitted, but never compelled, to institute an IPR proceeding.”). For the reasons stated below, we exercise our discretion not to institute an inter partes review. A. Real Parties-in-Interest” slip op. at 2
- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Institution denied fintivDenied
“Board’s projected statutory deadline to issue a final written decision. Fintiv, Paper 11 at 9. “If the court’s trial date is at or around the same time as the projected statutory deadline . . . the decision whether to institute will likely implicate other factors.” Id. Conversely, “[i]f the court’s trial date is earlier than the projected statutory deadline,” this has generally weighed “in favor of exercising authority to deny institution.” Id.” slip op. at 15
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsNot reached
“Petition under 35 U.S.C. § 325(d) because the same or substantially the same art and arguments were before the Examiner during prosecution and Petitioner’s has not demonstrated that the Examiner erred in a material manner when allowing the claims. Pet. 17–18. Given our discretionary denial of the Petition in view of the Fintiv factors, we do not address Petitioner’s further arguments with respect to § 325(d).” slip op. at 32
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner applies Petitioner’s recited level of ordinary skill in the art for purposes of its Preliminary Response. Prelim. Resp. 4. Upon review of the parties’ arguments and the prior art of record, we adopt Petitioner’s unopposed definition of the ordinarily skilled artisan for purposes of this decision as it appears consistent with the disclosures of the ’090 patent and the prior art of record. C. Claim Construction” slip op. at 9
§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 10,480,090 - SAP America, Inc. v. Cyandia, Inc.Institution deniedPTAB · Apr 7, 2025 · IPR2024-01496 · APJ Mitchell G Weatherly · IPR · Institution
The Board denied institution of inter partes review of claims 1–11, 13, 16, 18, and 31–34 under § 314(a), after weighing the Fintiv factors.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“Although Petitioner has filed a Sotera stipulation, we agree with Patent Owner that the stipulation has limited practical effect in reducing the overlapping efforts here and in the Litigation. Petitioner contends in the district court that the system described in the WebSphere materials renders at least some of the challenged claims invalid. Because Petitioner cannot challenge claims in this proceeding based on a public use or sale of the WebSphere system, Petitioner’s Sotera stipulation would not prevent Petitioner from asserting an invalidity defense in the district court based on the public use or sale of the WebSphere system. We understand that, in the Litigation, Petitioner has relied upon the WebSphere publications as prior art, presumably as evidence describing the WebSphere system that was publicly used and on sale. Regardless of any decision rendered in this proceeding on the patentability of the challenged claims based on the WebSphere printed publications, Petitioner may continue to press an invalidity defense based on the same evidence presented here. Additionally, it appears that all claims being contested as invalid in the Litigation are also subject to a challenge in the Petition. The narrowing of asserted claims in the Litigation, if it occurs, will streamline the parties’ overall dispute on invalidity if we decide to discretionarily deny institution. So, a majority of the parties’ work that would be done here will also be required in the Litigation regardless of whether we institute review. Accordingly, we do not consider the presence of the Sotera stipulation in our case to ensure that inter partes review would be a “true alternative” to the Litigation. On balance, we find that Fintiv Factor 4 weighs in favor of discretionarily denying institution. E. Fintiv Factor 5: Whether Petitioner Is Defendant in District Court” slip op. at 8
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied fintivInstitution denied
“We decline to characterize the merits as sufficiently strong to overcome the other factors. That is not to say we view Petitioner’s case as marginal or close. Rather we determine that the other factors are more persuasive here. Although Petitioner’s challenge is straightforward and definitely meets the standard for institution, even when balanced against Patent Owner’s counterarguments, we do not find the challenge to be sufficiently strong to outweigh the evidence discussed above in connection with Fintiv Factors 1–5. When reviewing all other circumstances, we find that Fintiv Factor 6 is neutral. G. Conclusion” slip op. at 10
Discretionary denialPatents in suitUS 8,595,641 - SAP America, Inc. v. Cyandia, Inc.Institution deniedPTAB · Apr 7, 2025 · IPR2024-01495 · APJ Mitchell G Weatherly · IPR · Institution
The Board denied institution on claims 1–10, 13, 17, 18, and 36–42 under § 314(a), finding the Fintiv factors holistically favored discretionary denial.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Institution denied
“Although Petitioner has filed a Sotera stipulation, we agree with Patent Owner that the stipulation has limited practical effect in reducing the overlapping efforts here and in the Litigation. Petitioner contends in the district court that the system described in the WebSphere materials renders at least some of the challenged claims invalid. Because Petitioner cannot challenge claims in this proceeding based on a public use or sale of the WebSphere system, Petitioner’s Sotera stipulation would not prevent Petitioner from asserting an invalidity defense in the district court based on the public use or sale of the WebSphere system. We understand that, in the Litigation, Petitioner has relied upon the WebSphere publications as prior art, presumably as evidence describing the WebSphere system that was publicly used and on sale. Regardless of any decision rendered in this proceeding on the patentability of the challenged claims based on the WebSphere printed publications, Petitioner may continue to press an invalidity defense based on the same evidence presented here. Additionally, it appears that all claims being contested as invalid in the Litigation are also subject to a challenge in the Petition. The narrowing of asserted claims in the Litigation, if it occurs, will streamline the parties’ overall dispute on invalidity if we decide to discretionarily deny institution. So, a majority of the parties’ work that would be done here will also be required in the Litigation regardless of whether we institute review. Accordingly, we do not consider the presence of the Sotera stipulation in our case to ensure that inter partes review would be a “true alternative” to the Litigation. On balance, we find that Fintiv Factor 4 weighs in favor of discretionarily denying institution. E. Fintiv Factor 5: Whether Petitioner Is Defendant in District Court” slip op. at 8
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied discretionary otherInstitution denied
“Institution of an inter partes review is authorized by statute when “the information presented in the petition filed under section 311 and any response filed under section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a).” slip op. at 2
Discretionary denialPatents in suitUS 8,578,285 - SAP America, Inc. v. Cyandia, Inc.Institution deniedPTAB · Apr 7, 2025 · IPR2024-01432 · APJ Jason W Melvin · IPR · Institution
The Board denied institution of review of claims 1–7, 10, 11, 13, 18, 19, 23, 29, 35, and 36 under § 314(a) based on the Fintiv factors and copending district-court litigation.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Institution denied fintivInstitution denied
“overcome the other factors. That is not to say we view Petitioner’s case as marginal or close, rather we determine that the other factors are more persuasive here. Although Petitioner’s challenge is straightforward and definitely satisfies the institution standard, even when balanced against Patent Owner’s counterarguments, we do not find the challenge to be sufficiently strong to outweigh the evidence discussed above in connection with Fintiv factors 1–5. When reviewing all other circumstances, we find that factor 6 is neutral.” slip op. at 10
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“An inter partes review may not be instituted unless “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). “When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.” 37 C.F.R. § 42.108(a) (2021).” slip op. at 2
Discretionary denialPatents in suitUS 8,751,948 - Honeywell International Inc. v. DSM IP Assets B.V.Institution deniedPTAB · Aug 21, 2024 · IPR2024-00493 · APJ Erica A Franklin · IPR · Institution
The Board denied institution because Honeywell did not show a reasonable likelihood that claims 1–9 were unpatentable over any of its three obviousness combinations.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Accordingly, we determine that Petitioner has not shown a reasonable likelihood of prevailing in its obviousness challenge of independent claim 1 or dependent claims 2–9 over the combination of Simmelink and Section 73.1015.” slip op. at 23
- Skill levelOther
“PHOSITA) at the time of the ’532 patent “would have had at least a Bachelor’s degree in the field of chemistry, chemical engineering, polymer chemistry, or materials science and at least three years of relevant work experience in the field of high strength fibers.” Pet. 8 (citing Ex. 1003 ¶ 18). Petitioner adds that individuals with different educational backgrounds could still be of ordinary skill in the art if they have “additional experience [that] compensates for a deficit in their education and experience stated above.” Id. According to Patent Owner, a person or ordinary skill in the art, would have (i) a bachelor’s degree in chemistry, polymer chemistry, materials science, chemical engineering, or biomedical engineering and (ii) three years of experience in designing and manufacturing gel-spun UHMWPE yarns. At this level of skill, a PHOSITA would have a detailed understanding of the information provided in the Technology Background, Section II, supra, including (i) the differences between linear HDPE and UHMWPE, (ii) the history underlying Section 73.1015 and the early failures of the 1960s-era blue, melt-extruded polyethylene sutures, (iii) why the molecular orientation of polyethylene molecules leads to strong yarns in the special case of gel-spun UHMWPE, and (iv) the challenges associated with coloring gel-spun UHMWPE yarns, especially for end-use medical applications. Prelim. Resp. 33–34. We note that the parties’ proposed definitions are largely similar, except that Patent Owner additionally recognizes a Bachelor’s degree in biomedical engineering and requires experience in designing and manufacturing gel-spun UHMWPE yarns. In any event, we do not need to the same under either proposed definition.” slip op. at 6
- Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed patent owner constructionDecided for patent owner
“a skilled artisan would have understood that the “gel spinning” process recited in the claims requires the use of a solvent during the spinning process. Indeed, the Specification describes this term, as follows: Gel spinning is understood to include at least the steps of spinning filaments from a solution of ultra-high molecular weight polyethylene in a spin solvent; cooling the filament obtained to form a gel filament removing at least partly the spin solvent from the gel filament; removing at least partly the spin solvent from the gel filament; and drawing the filament in at least one drawing step before during or after removing spin solvent. Ex. 1001, 2:31–37. We recognize the inventor’s lexicography as dispositive with respect to the meaning of the term “gel spinning.” See Phillips v. AWHCorp., 415 F.3d 1303, 1316 (Fed. Cir. 2005); SciMed Life Sys., Inc. v. Advanced Cardiovascular Sys., Inc., 242 F.3d 1337, 1343–44 (Fed. Cir.” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITADecided for patent owner
“Claim 1 describes gel spinning as the manner by which the filaments comprised in the claimed colored multi-filament yarn are obtained. This, on its face, is a product-by-process claim element because it describes the filament structure being obtained in a particular way, i.e., by gel spinning. See Kamstrup A/S v. Axioma Metering UAB, 43 F.4th 1374, 1382 (Fed. Cir. 2022) (agreeing with the Board that “cast in one piece” is a product-by-process claim element as it describes the structure being cast “in a particular way”). For this element to be limiting, it must impart “structural and functional differences” that distinguish the claimed product from the prior art. See Amgen Inc. v. F. Hoffman-La Roche Ltd, 580 F.3d 1340, 1365–67 (Fed. Cir. 2009). Patent Owner argues persuasively that gel spinning imparts structural and functional differences to the claimed product because the process “creates overlap between polyethylene molecules within the UHMWPE filaments that maximizes the intermolecular Van der Waals interactions, resulting in highly crystalline filaments with high tensile strength.” Prelim. Resp. 38, 22 (citing Ex. 1014, 62–66). According to Patent Owner, “the structure of the gel spun UHMWPE is substantially different from other types of UHMWPE such as compression-molded and ram-extruded UHMWPE used to make joint replacements and other orthopedic implants.” Id. at 38.” slip op. at 9
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,280,532 - Nespresso USA, Inc. v. K-Fee System GmbHInstitution deniedPTAB · Jun 10, 2024 · IPR2024-00239 · APJ Jon B Tornquist · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–20 would have been obvious over either asserted combination.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“review. 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2022). The standard for institution is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons set forth below, Petitioner does not demonstrate a reasonable likelihood of prevailing with respect to any of claims 1–20 of the ’094 patent. Accordingly, we do not institute an inter partes review.” slip op. at 2
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“The express language of the claim, however, does not support using the “central axis” as the measuring point for determining if one object is laterally offset from another. For example, the term “central axis” is not used in the relevant claim phrase and the dictionary definitions of “lateral” relied upon by Petitioner and Mr. Jobin to show the ordinary meaning of the claim term do not suggest that the “central axis” is the reference point for determining whether a first object is “laterally offset” from a second object. As such, we determine that the claim language supports Patent Owner’s construction requiring that the “groove” be “off to the side” of the entire mandrel, and not merely the “central axis” of the mandrel. Prelim. Resp. 54. We must also resolve whether the entire groove is required to be laterally offset from the chamfered mandrel, or only a portion of it. On this point, the claims do not use the term “portion,” but rather specify that the “groove” is “laterally offset from the chamfered mandrel.” Ex. 1001, 14:4– 5, 15:19–20. This suggests that the entire “groove” must be offset from the “chamfered mandrel.”” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“That argument, however, does not explain why it would have been obvious to laterally offset the groove of Yoakim from the chamfered mandrel. Rather, as demonstrated by Mr. Jobin’s testimony, this argument relates to the general use of a sealing member in a groove, to the extent it was ultimately determined that such a configuration is not expressly disclosed in Yoakim. Id.; Ex. 1003 ¶ 296 (“It would have been obvious to one skilled in the art to position a sealing member in a groove to solidify the between counter-force portion 161 and engaging portion 157 in Figure 35 of Yoakim is more appropriately identified as the claimed “groove.” Prelim. Resp. 60–61. We need not resolve this issue, however, as Petitioner does not persuasively demonstrate that either potential “groove” is “laterally offset” from the chamfered mandrel. placement of the seal and improve its sealing stability and strength. Furthermore, it would have been obvious to one skilled in the art to utilize a groove and seal configuration in the brewing head . . . .”) (emphasis added). Even if we interpret the recited portion of the Petition as an argument for placing the groove entirely to the side of the mandrel in Yoakim, the Petition does not persuasively explain why one of ordinary skill in the art would have sought to do so. In Figure 35 of Yoakim, the seal and groove, as well as an elastic loading means, act as a valve means to control the level of pressure exerted in the capsule and “optimize interaction of water and the ground coffee particles to obtain a good extraction of the coffee and aroma compounds.” Ex. 1004 ¶¶ 370–372, 382, 396–398, 434–436, 445; Ex. 1003 ¶¶ 286–290; Pet. 63. These are the same beneficial properties relied upon by Petitioner to support the proposed combination, and Petitioner does not persuasively explain why one of ordinary skill in the art would have modified Yoakim in order to achieve results that are already obtained in the identified embodiment. Pet. 63. In view of the foregoing, we determine that Petitioner does not demonstrate a reasonable likelihood that claims 1 and 12 would have been obvious over the combined disclosures of Yoakim, Jarisch 929, and Rossi.” slip op. at 20
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,542,094 - PTAB · May 24, 2024 · IPR2023-00861 · APJ Christopher M Kaiser · IPR · Remand
The Board denied institution because Petitioner did not show a reasonable likelihood that any challenged claim was unpatentable under any asserted ground.
RulingsRemand decision- RemandOther
“Accordingly, the Director instructed us to “determine whether Petitioner has demonstrated that Figure 1 of Godefroy ‘is clear on its face’ or would have reasonably suggested the placement of Godefroy’s sacrificial anode ‘within 10 inches’ of the hot liquid inlet.” Id. at 9. “In making this determination,” the Director instructed us to “consider whether the expert testimony provides sufficient ‘technical detail, explanation, or statements supporting why the expert determines that the feature in question was required or would have been obvious based on the prior art disclosure.’” Id. In addition, although the Director’s decision “is limited to [our] application of Hockerson to the grounds in the Petition involving Godefroy,” the Director instructed us also to “consider what effect, if any, this decision has on the other asserted grounds.” Id. Finally, the Director instructed us to “set forth [our] interpretation” of “the limitation ‘within 10 inches of a hot liquid inlet to the radiator.’” Id. at 8 n.4.” slip op. at 4
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“original decision, the Director’s decision, and the evidence currently of record, we determine that Petitioner has not shown a reasonable likelihood that it will prevail in showing that at least one of the challenged claims is unpatentable. Accordingly, we do not institute an inter partes review of any challenged claim based on any ground asserted in the Petition. IV. ORDER For the reasons given, it is: ORDERED that, pursuant to 35 U.S.C. § 314, the Petition is denied, and no inter partes review is instituted.” slip op. at 19
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“evidence. The challenged claims require that a sacrificial anode be placed within a certain distance—10 inches—of the hot liquid inlet, and, because the inlet has some non-zero size, it might be possible for an anode to be within that distance from some parts, but not from all parts, of the inlet. Accordingly, specifying the center axis of the inlet as the point from which to measure the distance to the anode improves on the plain words of the claim in terms of achieving the claim’s objective of placing the anode within a specified distance of the inlet. Moreover, when discussing the distance from the inlet to the anode, the specification of the ’494 patent uses the language “within 10 inches in any direction of the center axis of the inlet connection.” Ex. 1001, 7:61–64. Thus, the intrinsic evidence supports adopting Petitioner’s claim construction. Petitioner’s declarant, Dr. Medlin, relies on Petitioner’s proposed construction. See, e.g., Ex. 1004 ¶¶ 20 (noting that the construction “within 10 inches of the center axis of [a] hot liquid inlet” “ha[s] been adopted by Petitioner”), 96 (“the sacrificial anodes contained in each of the turbulators 2 would be placed within 10 inches of a center axis of a hot liquid inlet to the radiator of Tomosada”), 144 (“A POSITA would understand from Figure 1 that the sacrificial anode 14 is within 10 inches of a center axis of a hot liquid inlet”), 267 (“These teachings would further motivate a POSITA to located the sacrificial anode 12 within 10 inches of a center axis of the hot liquid inlet.”). This support for Petitioner’s proposed construction provides further reason for us to adopt it. Because it is supported by the intrinsic evidence of record, because Patent Owner proposes no alternative construction, and because Petitioner’s expert supports it, we adopt the construction of “within 10 inches of a hot liquid inlet to the radiator” that Petitioner proposes. Thus, we construe this term as “within 10 inches of the center axis of a hot liquid inlet to the radiator.” In other words, when discussing the distance between a hot liquid inlet and a sacrificial anode, we interpret “hot liquid inlet” as “center axis of the hot liquid inlet.”” slip op. at 5
- BurdenNot shown unpatentable
“Inherency may be relied upon in arguing either anticipation or obviousness. Schering, 339 F.3d at 1377 (applying inherency in an anticipation context); Par Pharma. Inc. v. TWI Pharma., Inc., 773 F.3d 1186, 1195–96 (Fed. Cir. 2014) (applying inherency in an obviousness context). In both cases, however, “[t]he mere fact that a certain thing may result from a given set of circumstances is not sufficient.” Therasense, Inc. v. Becton, Dickinson & Co., 593 F.3d 1325, 1332 (Fed. Cir. 2010). Instead, “the limitation at issue necessarily must be present, or the natural result of the combination of elements expressly disclosed by the prior art.” Par Pharma., 773 F.3d at 1195–96. Here, Petitioner has not shown sufficiently that, in Godefroy, the sacrificial anode necessarily is placed within 10 inches of the center axis of the hot liquid inlet. Dr. Medlin testifies that Figure 1 of Godefroy shows that “an entirety . . . or at least a significant portion of the sacrificial anode 14, is within 10 inches of a center axis of the inlet.” Ex. 1004 ¶ 144. But we cannot say that Figure 1 of Godefroy is clear on its face, or reasonably suggests, that this is necessarily the case. There are no dimensions shown on Figure 1, so it is unclear from the figure what the diameter of pipe 12 is. If that diameter is larger than 20 inches, then it simply is untrue that “sacrificial anode 14 is . . . necessarily placed within 10 inches of a center axis of a hot liquid inlet to the radiator,” as Dr. Medlin testifies. Id. ¶ 361. As noted above, neither Petitioner nor Dr. Medlin relies on the hot liquid inlet of Godefroy having any particular diameter, and Godefroy is silent as to the diameter of its inlet. Pet. 69–70; Ex. 1004 ¶¶ 144, 359–361, 381–382, 406–408; Ex. 1008, 1–15. Moreover, as Patent Owner notes, there is a wide range of sizes of radiators, including automobile radiators, available. Prelim. Resp. 3–5; Exs. 2001–2003. In the absence of any testimony or other evidence that tends to show that radiator inlet pipes necessarily have diameters less than 20 inches, Petitioner has not shown sufficiently that the diameter of Godefroy’s inlet pipe is small enough to ensure that any portion of the anode necessarily is within 10 inches of the center axis of the inlet.” slip op. at 11
Claim constructioncites Phillips
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.