• Nintendo Co., Ltd. / Nintendo Of America Inc. v. American GNC CorporationAll claims unpatentable
  PTAB · Aug 20, 2025 · IPR2024-00668 · APJ Lisa L Tsang · IPR · Final written decision

  Claims 1 and 4 are unpatentable as obvious over Smith, Chan, and Bernstein (claim 1), Smith, Chan, Bernstein, Irwin, and Merhav (claim 4), and Tingleff, Chan, and Bernstein (claims 1 and 4).

  RulingsFinal written decision

  • PTAB / AIA Trials › §315(b) time barNot time barredDecided for petitioner

    “partes review may not be instituted if the petition requesting the proceeding is filed more than 1 year after the date on which the petitioner, real party in interest, or privy of the petitioner is served with a complaint alleging infringement of the patent.” 35 U.S.C. § 315(b) (emphasis added). Accordingly, a petition for inter partes review may be considered only if, among other things, it “identifies all real parties in interest,” and no real party in interest was served with a complaint alleging infringement of the challenged patent more than one year before the petition was filed. 35 U.S.C. § 312(a)(2). “[T]he IPR petitioner bears the burden of persuasion to demonstrate that its petitions are not time-barred under § 315(b) based on a complaint served on a real party in interest more than a year earlier.” Worlds Inc. v. Bungie, Inc., 903 F.3d 1237, 1242 (Fed. Cir. 2018). However, “an IPR petitioner’s initial identification of the real parties in interest should be accepted unless and until disputed by a patent owner,” who, in turn, “must produce some evidence that tends to show that a particular third party should be named a real party in interest.” Id. at 1242, 1244 (footnote omitted).” slip op. at 8

  • PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner

    “Based on the arguments and evidence of record, we determine that Patent Owner has not produced sufficient evidence to support a finding that STMicro should be named a real party in interest to this proceeding. At best, Patent Owner’s evidence and arguments establish only that Patent Owner previously filed a complaint against STMicro, asserting that STMicro infringed patents related to the ’648 patent (see generally Ex. 2012); and that Patent Owner served a subpoena to compel STMicro to testify and produce documents in Patent Owner’s infringement suit against Petitioner (see generally Ex. 2014). The record before us does not demonstrate a relationship between Petitioner and STMicro sufficient to show that STMicro is a real party in interest. See Worlds, 903 F.3d at 1242, 1244 (“[A]n IPR petitioner’s initial identification of the real parties in interest should be accepted unless and until disputed by a patent owner,” who, in turn, “must produce some evidence that tends to show that a particular third party should be named a real party in interest.” (footnote omitted)).” slip op. at 9

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Pet. 5 (citing Ex. 1002 ¶¶ 12–14). Patent Owner counters that the skilled artisan would have had “at least a ‘Master’s Degree in Electrical or Electronics Engineering, and approximately five years of relevant experience in the development of control systems for inertial navigation, MEMS semiconductor processing, and analog circuit design.’” PO Resp. 18 (citing Ex. 2019 ¶ 57). We adopt Petitioner’s articulation of the level of ordinary skill in the art, which is consistent with our review and understanding of the technology and descriptions in the ’648 patent and prior art of record, and we apply it in our obviousness evaluations below. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). We note, however, that we would reach the same conclusions applying either Petitioner’s or Patent Owner’s definition of the level of skill in the art.” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Preamble limiting or notPreamble limitingDecided for patent owner

    “We find unavailing Petitioner’s reliance on Catalina to support its claim construction position. See Reply 2. In particular, although Petitioner contends the body of the claims “define[s] a structurally complete invention,” Petitioner does not explain how the claims additionally “use[] the preamble only to state a purpose or intended use for the invention,” as Catalina further requires. See Catalina, 289 F.3d at 808 (“a preamble is not limiting ‘where a patentee defines a structurally complete invention in the claim body and uses the preamble only to state a purpose or intended use for the invention” (emphasis added)). In this regard, we discern no reason to interpret “[a] micro inertial measurement unit” as reciting only a purpose or intended use because the term, on its face, uses “micro inertial measurement” as an adjective that conveys further structural details of the unit. Accordingly, on the complete record, and for the reasons set forth in our Institution Decision, we maintain our construction that “[a] micro inertial measurement unit” recited in the preamble is limiting and requires a micro-sized inertial measurement unit, and that the structures recited in the limitations of the claims are limited to structures implemented as MEMS devices. Dec. 21–24.” slip op. at 14

  Patent outcomesUS 6,671,648 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 6,671,648
• Nintendo Co., Ltd. / Nintendo Of America Inc. v. American GNC CorporationAll claims unpatentable
  PTAB · Aug 20, 2025 · IPR2024-00667 · APJ Jennifer S Bisk · IPR · Final written decision

  Claims 1 and 3 are unpatentable under § 103 over Fujiyoshi, Kumar, Cox, and Townsend, and independently over Mitamura and Townsend.

  RulingsFinal written decision

  • PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerNot time barredDecided for petitioner

    “other things, it “identifies all real parties in interest.” 35 U.S.C. § 312(a)(2). “[T]he IPR petitioner bears the burden of persuasion to demonstrate that its petitions are not time-barred under § 315(b) based on a complaint served on a real party in interest more than a year earlier.” Worlds Inc. v. Bungie, Inc., 903 F.3d 1237, 1242 (Fed. Cir. 2018). However, “an IPR petitioner’s initial identification of the real parties in interest should be accepted unless and until disputed by a patent owner,” who, in turn, “must produce some evidence that tends to show that a particular third party should be named a real party in interest.” Id. at 1242, 1244 (footnote omitted). Whether a non-party is a real party in interest is a “highly fact-” slip op. at 11

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “would have possessed a bachelor’s degree in electrical engineering or similar degree, with two to three years of practical experience designing and/or implementing systems that include sensors for measuring movement, such as acceleration and rotational position. . . . A skilled artisan could also have had more formal education and less practical experience, or vice versa. Pet. 5 (citing Ex. 1002 ¶¶ 12–14). Patent Owner states that “[a] person of ordinary skill in the art with respect to the ’122 Patent would have at least a five years of relevant experience in the development of control systems for inertial navigation, MEMS semiconductor processing, and analog circuit design.” PO Resp. 18 (citing Ex. 2019 ¶ 57). We adopt Petitioner’s articulation of the level of ordinary skill in the art, which is consistent with our review and understanding of the technology and descriptions in the ’122 patent and prior art of record, and we apply it in our obviousness evaluations below. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). We note, however, that we would reach the same conclusions applying either Petitioner’s or Patent Owner’s definition of the level of skill in the art.” slip op. at 13

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “that would be used to construe the claim in a civil action under 35 U.S.C. 282(b).” 37 C.F.R. § 42.100(b) (2019). In this context, claim terms “are generally given their ordinary and customary meaning” as understood by a person of ordinary skill in the art in question at the time of the invention. Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (citations omitted) (en banc). “The Board is required to construe ‘only those terms ... that are in controversy, and only to the extent necessary to resolve the controversy.’” Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng'g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Neither party argues that any claim term requires construction. Pet. 6; PO Resp. 18. Accordingly, we do not explicitly construe any term.” slip op. at 14

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “Record evidence supports Petitioner’s contentions that a skilled artisan would have had reason to look to Kumar for further implementation details of a circuit that performs functions like those performed by Fujiyoshi. See Pet 24–26. For example, Dr. Young testifies that a person of ordinary skill in the art would have recognized that Kumar discloses the details, at a granular level, of Fujiyoshi’s capacitive sensing systems and would have looked to Kumar for understanding of how to implement Fujiyoshi’s system. Ex. 1002 ¶ 145. Patent Owner does not point to persuasive evidence to rebut this opinion. Moreover, Petitioner cites to Kumar, not only for an explicit disclosure of capacitive pickoff signals, but also for its disclosure of both DC bias and AC carrier signals and recognizing the applicability of an AC carrier pickoffs that operates without DC bias. Pet. 24–26 (citing Ex. 1005 3:65–4:2, 6:29–36). We credit Dr. Young’s testimony on this issue and agree with Petitioner that a person of ordinary skill in the art, looking at Fujiyoshi’s description of capacitive sensing systems, would be motivated to look to Kumar for its more detailed teachings of the implementation details of such systems and would combine these details to arrive at limitation 1(a). We determine that Petitioner has shown, by a preponderance of the evidence, that one of ordinary skill in the art would have been motivated to combine Fujiyoshi and Kumar in the manner argued by Petitioner.” slip op. at 37

  Patent outcomesUS 6,508,122 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 6,508,122
• Dropbox, Inc. v. Motion Offense, LLCAll claims unpatentable
  PTAB · Jul 1, 2025 · IPR2024-00287 · APJ Norman H Beamer · IPR · Final written decision

  Claims 9–12, 14–16, and 22–24 are unpatentable under § 103 over Riepling and Meisels, or Riepling, Manzano, and Meisels; claim 13 was disclaimed.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner’s proposal is consistent with the level of ordinary skill in the art as reflected by the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); GPAC, 57 F.3d at 1579. We apply Petitioner’s articulation.” slip op. at 20

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner

    “construction of “representation of the at least one file.” Petitioner is correct that a representation of a file is not the file itself, but (in keeping with the ordinary meaning of “representation”) is rather some sign or symbol that stands for the folder. Reply 2. This is confirmed by the explicit example of a representation of a folder in the ʼ906 application, illustrated in the portion of Figure 6B reproduced below (highlighted here for purposes of explanation). This portion of Figure 6B depicts representations of two files: “FamilyHistory.docx” and “XmasLetter-2012.pdf.” The ’906 application specifically states: [A] located data resources dialog UI element 630b . . . includes a presentation space 632b for presenting a user detectable representation of some or all of the data objects identified in the received data object identification response from . . . second node 504. Ex. 2004 ¶ 147 (emphasis added). The entries in the above figure are representations of the files, not the files themselves. The actual files are stored in the file system storage associated with the user’s node, and only retrieved if the user selects the “Access” or “Access All” elements. Id. ¶ 148. Patent Owner misconstrues the claim 22 language, “a first representation of the at least one file, in a location among one or more folders, that is stored at the at least one server” and “a second representation of the at least one file, in a location among one or more folders, that is stored at the first node.” Patent Owner infers from this language that the representation is itself a file that is “in a location among one or more folders” and is stored on a server or at a node. PO Resp. 17. Not so — the representation of a file, such as “FamilyHistory.docx” in the above figure, is not stored at a server or node, but rather is simply displayed on a screen. As the ’906 application states: A representation of a program entity may be stored and/or otherwise maintained in a presentation space. As used in this document, the term “presentation space” refers to a storage region allocated and/or otherwise provided for storing presentation information . . . . A screen of a display, for example, is a presentation space.” slip op. at 22

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “because (i) Riepling and Meisels are from the same field of endeavor, directed to sharing files over a network; (ii) the combination would have yielded expected, predictable results, using known and routine computer programming principles, to modify Riepling’s system to generate an electronic message that includes a link pointing to an uploaded file; (iii) the combination would have been readily implemented given Meisels’ teachings of inserting, in an electronic message, a link to a shared location where a file is uploaded; and (iv) the combination was suggested because Meisels expressly disclosed a benefit of sending an email message with a link, to avoid multiple copies of a file from existing at multiple locations, and sending links to one file to multiple recipients and managing permissions on an individual recipient basis. Pet. 67–70 (citing Ex. 1107, Fig. 1, ¶¶ 2, 4, 19; Ex. 1108, Fig. 4, ¶¶ 1, 3, 41–45, 56; Mowry Decl. ¶¶ 194–198). In addition, for reasons similar to the motivation basis, Petitioner argues that a person of ordinary skill in the art would have had a reasonable expectation of success in making the combination. Id. at 70–71 (citing Mowry Decl. ¶¶ 199–200). Other than its arguments directed to ’520 claim requirement 9[l], discussed below in Section III.D.4.d), Patent Owner does not further address Petitioner’s arguments regarding the combination of Riepling and Meisels. As discussed in that section, we are persuaded by Petitioner’s expert’s testimony that one of ordinary skill would have applied the document link teachings of Meisels to modify Riepling. Accordingly, we determine that Petitioner has proved by a preponderance of the evidence that one of ordinary skill in the art would have been motivated to combine Riepling and Meisels in the manner argued by Petitioner.” slip op. at 32

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “We agree with Petitioner that set content field 325 of Riepling teaches or suggests claim requirement 9[b]. As Petitioner’s expert explains, the fact that field 325 has an appearance identical to that of fields 321–324 in Figure 3, which fields are specifically stated to be “text field[s],” strongly suggests that field 325 is also a text field. Mowry Decl. ¶ 70; see also Reply 10–11. Patent Owner’s suggestion that field 325 could be a dropdown list or other type of field is contradicted by the fact that it does not show the typical dropdown arrow associated with a dropdown box, or other typical non-textbox appearance such as the checkbox appearance of field 320. Moreover, in the example of Figure 3, the “Set Content” entry is “audio,” which is a file description. Reply 10. The fact that “JPEG” is checked in field 320 is not inconsistent with the “audio” entry in field 325, given that, as Riepling explains, “it may be possible for audio files such as MP3 files to contain non-MP3 data, such as JPEG data embedded within the MP3 files.” Id. at 11 (citing Ex. 1107 ¶ 32; Mowry 2nd Decl. ¶ ¶ 101–104). Also, there is no reason why the Figure 5 response that gives the uploader the ability to provide additional description of the file being uploaded is inconsistent with the ability of the requester first describing what type of file is being requested via field 325 in Figure 3. Id. at 11–12. Accordingly, for the reasons discussed above, we are persuaded that the record supports Petitioner’s arguments regarding claim requirement 9[b].” slip op. at 37

  Patent outcomesUS 11,611,520 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,611,520
• Dropbox, Inc. v. Motion Offense, LLCAll claims unpatentable
  PTAB · Jun 30, 2025 · IPR2024-00286 · APJ Norman H Beamer · IPR · Final written decision

  Claims 17–21 are unpatentable under § 103 over Houston and Garcia; the Board did not reach the alternative grounds.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “We conclude that there is no basis for Patent Owner’s proposed construction of “representation of the at least one folder.” Petitioner is correct that a representation of a folder is not the folder itself, but (in keeping with the ordinary meaning of “representation”) is rather some sign or symbol that stands for the folder. Reply 2. This is confirmed by the explicit example of a representation of a folder in the ’635 application, illustrated in the portion of Figure 6D reproduced below (highlighted here for purposes of explanation). This portion of Figure 6D depicts representations of several folders, including the highlighted “Music” folder. The ’635 application specifically states: A folder content pane UI element 648d in navigation window UI element 646d is presented including representations of one or more data objects[11] at a location, identified in a path UI element 650d. A pointer UI element 652d illustrates a drag and drop operation of a “Music” folder represented in contents pane UI element 648d, dropped on edit window UI element 602d. Ex. 2004 ¶ 123 (emphasis added). The word “Music” in the above figure is a representation of a folder, not the folder itself. The actual folder is an entity in a file system that stores files (in the case of a “Music” folder, presumably MP3 or WAV files, or the like).” slip op. at 17

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “Patent Owner’s arguments are not pertinent to Petitioner’s proffered combination of Houston with Garcia as applied to the remaining challenged claims 17–21. As discussed further below, Petitioner relies on Garcia as supplementing Houston for details regarding the requirements of generating and sending an email with a link to a folder but without a file attachment, and for synchronizing folders and providing interfaces for display of shared folders. Pet. 26–27, 36–39, 57–60. For the challenged claims, Petitioner does not need to rely on the combination to modify Houston’s system such that, when an icon for a shared folder is created in Houston’s interface at an invited user’s client, the client does not store a file in the shared folder — 14 For this argument and others, Patent Owner cites for additional support portions of U.S. Provisional Patent Application No. 61/233,787. PO Resp. 18, 42, 46; Sur-Reply 9–12. This application is designated in Houston as a related application, and incorporated by reference therein. Ex. 1003, code (60), 1:6–10. We denied as untimely Patent Owner’s request to belatedly add this application to the record. Ex. 3002; Paper 39. Even accepting Patent Owner’s representations of the relied-on disclosures in that application, those disclosures are cumulative to Houston’s criticisms of systems that store documents remotely, and are irrelevant for the same reasons as discussed herein with respect to those Houston disclosures. that aspect of the Houston/Garcia combination is only relevant to claims 1–8, which have been disclaimed. Id. at 40–41; Ex. 2045.15 Thus, Patent Owner’s argument that Houston teaches away from combining with Garcia to delay storing a file when a folder is shared is not applicable to Petitioner’s challenges of claim 17–21, in light of our conclusion set forth above in Section III.C rejecting Patent Owner’s proposed construction of claim 17. The fact that the Houston system ensures the availability of synchronized local copies of files at each user’s local system and criticizes systems that store documents remotely, such as in Garcia, is irrelevant to those claims. On this record, there is nothing about that particular difference in the approaches of Houston and Garcia that would support a finding that one of ordinary skill in the art would have been discouraged from adopting Houston to take advantage of the teachings in Garcia regarding use of email and folder interfaces. In sum, Patent Owner focuses on a specific irrelevant detail of Houston regarding local storage of files, whereas Petitioner relies on other features of the combination of Houston and Garcia. In re Merck & Co., 800 F.2d 1091, 1097 (Fed. Cir. 1986); In re Keller, 642 F.2d 413, 425 (CCPA 1981). “The test for obviousness is not whether the features of a secondary reference may be bodily incorporated into the structure of the primary” slip op. at 41

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “To give substantial weight to objective indicia of nonobviousness such as commercial success, a proponent must establish a nexus between the evidence and the merits of the claimed invention. ClassCo, Inc. v. Apple, Inc., 838 F.3d 1214, 1220 (Fed. Cir. 2016). Nexus is a legally and factually sufficient connection between the objective evidence and the claimed invention, such that the objective evidence should be considered in determining nonobviousness. Demaco Corp. v. F. Von Langsdorff Licensing Ltd., 851 F.2d 1387, 1392 (Fed. Cir. 1988). “[T]here is no nexus unless the evidence presented is ‘reasonably commensurate with the scope of the claims.’” ClassCo, 838 F.3d at 1220 (quoting Rambus Inc. v. Rea, 731 F.3d 1248, 1257 (Fed. Cir. 2013)). A patentee is entitled to a presumption of nexus “when the patentee shows that the asserted objective evidence is tied to a specific product and that product ‘embodies the claimed features, and is coextensive with them.’” Fox Factory, Inc. v. SRAM, LLC, 944 F.3d 1366, 1373 (Fed. Cir. 2019) (quoting Polaris Indus., Inc. v. Arctic Cat, Inc., 882 F.3d 1056, 1072 (Fed. Cir. 2018)). “[T]he patentee retains the burden of proving the degree to which evidence of secondary considerations tied to a product is attributable to a particular claimed invention.” Fox Factory, 944 F.3d at 1378. The Federal Circuit has held that “if the marketed product embodies the claimed features, and is coextensive with them, then a nexus is presumed and the burden shifts to the party asserting obviousness to present evidence to rebut the presumed nexus.” Brown & Williamson Tobacco Corp. v. Philip Morris Inc., 229 F.3d 1120, 1130 (Fed. Cir. 2000). “A finding that a presumption of nexus is inappropriate does not end the inquiry into secondary considerations”; rather, “the patent owner is still afforded an opportunity to prove nexus by showing that the evidence of secondary considerations is the ‘direct result of the unique characteristics of the claimed invention.’” Fox Factory, 994 F.3d at 1373–74 (quoting In re Huang, 100 F.3d 125, 140 (Fed. Cir. 1996)). “Ultimately, the fact finder must weigh the [objective indicia] evidence presented in the context of whether the claimed invention as a whole would have been obvious to a skilled artisan.” See Lectrosonics, Inc. v. Zaxcom, Inc., IPR2018-01129, Paper 33, 33 (PTAB Jan. 24, 2020) (precedential) (citing WBIP, LLC v. Kohler Co., 829 F.3d 1317, 1331–32 (Fed. Cir. 2016)).” slip op. at 23

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “However, as Petitioner argues above, Houston discloses that a client can provide an email to the server to invite others to share a folder, and Houston explains that “attaching files [to emails is] cumbersome for many computer users.” Pet. 25–26 (citing Ex. 1003, Fig. 4, 1:41–42, 3:40–43, 7:50–51). From this, Petitioner argues that it would have been obvious for the email invitation to notify how to access the folder, rather than sending the folder contents itself. Id. Petitioner further argues that the claim 17[d] requirement would have been obvious over the combination of Houston and Garcia given the disclosure in Garcia of sharing a folder by sending an email with a link to the folder, instead of an attachment. Id. at 27, 57 (citing Ex. 1004, Figs. 9, 11–12, 10:32–34, 10:38–40, 11:39–43, cl. 3). We are persuaded that the record supports Petitioner’s arguments regarding this claim requirement. Both Houston alone, and the combination of Houston and Garcia, teach or suggest sending an email with a link to a folder to be shared, rather than the folder contents. Only if the recipient clicks on the link are the contents of the folder shared. Ex. 1004, 11:29–31. The act of clicking on the link in the email after the email is received is the required “initiation of the communication” that must occur separately from the email itself, as required by claim 17[d]: “causing generation of at least one email [that] does not include a file attachment, for permitting avoidance of at least one file from being communicated to and stored at the second node until an initiation of the communication of the at least one file by a user of the second node is detected and the communication commences via at least one server that stores the at least one file” (emphasis added). It does not matter if Houston or Garcia automatically downloads local copies of files when a recipient clicks on the email link, because that is a separate step following the step of claim 17[d].” slip op. at 46

  Patent outcomesUS 11,611,520 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,611,520
• Satco Products, Inc. v. The Regents Of The University Of CaliforniaAll claims unpatentable
  PTAB · Apr 28, 2025 · IPR2021-00662 · APJ Jennifer S Bisk · IPR · Remand

  On remand, the Board held claims 1 and 2 unpatentable under § 103: Yamazaki and Schubert for claim 1, with Tadatomo added for claim 2.

  RulingsRemand decision

  • RemandOther

    “As directed by the Federal Circuit, we assess whether Yamazaki teaches the cathode/anode limitation of claim 1. We do not revisit our analysis of the other limitations of claim 1. Remand Dec. 10–11 (agreeing with the Board’s findings on the other limitations of claim 1 disputed on appeal).” slip op. at 8

  • Expert testimonyPetitioner expert creditedDecided for petitioner

    “using the j-lead method (Petitioner’s position) or the thin film deposition method (Patent Owner’s position). Pet Remand Br. 2–5; PO Remand Br. 1– 4. Each side has arguments and expert testimony supporting their position.9,10 After considering each side’s arguments and all the associated evidence, we agree that the record supports Petitioner’s position for the reasons discussed below.” slip op. at 13

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “b. Figure 1 of Yamazaki We find that Yamazaki’s Figure 1 plainly shows electrically conductive patterns 11a at opposite edges of chip substrate 11, with each conductive pattern wrapping around an edge of the substrate. Ex. 1007 9 Patent Owner argues that Dr. Dupuis’ analysis on this issue “is confined to a single paragraph and adds nothing of substance relative to the Petition” and the Board should, therefore, “afford it little or no weight.” PO Remand Br. 1 (citing Ex. 1035 ¶ 246). Patent Owner also points to its own expert, Dr. Schubert, noting that his “opinions on this issue span over 20 pages and are supported by technical literature.” Id. (citing Ex. 2112 ¶¶ 158–208). We do not agree that the length of expert testimony, by itself, is a determining factor in its reliability. Moreover, we note that Dr. Dupuis also cites to technical literature. Ex. 1035 ¶ 246 (citing Ex. 1017, Figs. 3–4, ¶ 22). We decline to discount expert testimony based on these arguments regarding their relative length. 10 Patent Owner also states that “the Federal Circuit noted how Dr. Schubert’s opinions regarding Yamazaki were ‘unrebutted’ and that Satco ‘provides no response.’” PO Remand Br. 2. This is a mischaracterization of the Federal Circuit’s opinion, which explicitly identifies as unrebutted only Dr. Schubert’s testimony that “‘[i]n real applications,’” the “‘adhesive between the LED chip and supporting substrate would be approximately 1 micron to 10 microns thick.’” Remand Dec. 9. We see no other statements in the Remand Decision characterizing any other, let alone all, of Dr. Schubert’s opinions regarding Yamazaki as unrebutted. Fig. 1; see Ex. 1035 ¶ 246. This is true even presuming, as directed by the Federal Circuit, that the bolding of this element does not provide any information on relative thickness of element 11a. Id.” slip op. at 13

  • Obviousness (§103) › KSR rationalesMotivation foundReasonable expectation foundUnpatentable

    “conventional options for creating element 11a, that, regardless of the figures, both methods would have been obvious to a person of ordinary skill. Pet. Remand Br. 4–5. As stated, we find that Figure 1 teaches element 11a as composed of j-leads. However, we also agree that even if Figure 1 did not teach j-leads, the fact that there are only two conventional methods for creating element 11a indicates that both methods would have been obvious. See Uber Techs., Inc. v. X One Inc., 957 F.3d 1334, 1340 (Fed. Cir. 2020). In Uber, the parties agreed that there were only two possible solutions for whether to plot locations, i.e., either before transmitting location information (server-side plotting) or after transmitting location information (terminalside plotting). Id. at 1339. The Court held that both solutions would have been obvious to a person of ordinary skill. Id. at 1340. The same is true here. The difference between the j-lead and thin film deposition methods amounts to a design choice between two ways to manufacture element 11a. A person of ordinary skill would therefore have two predictable choices for this manufacture, providing them with a simple design choice as to whether to use j-leads or thin film deposition. See Uber, 957 F.3d at 1340. “Because a person of ordinary skill ‘has good reasons to pursue the known options within his or her technical grasp,’ § 103 bars the patentability of such obvious variations.” Id. (quoting KSR, 550 U.S. at 417, 421); see also CRFD Rsch., Inc. v. Matal, 876 F.3d 1330, 1347 (Fed. Cir. 2017) (explaining that “a person of ordinary skill would have two predictable choices for when the [prior art] would transmit browser information, providing a person of ordinary skill with a simple design choice” between the two options); ACCO Brands Corp. v. Fellowes, Inc., 813 F.3d 1361, 1367 (Fed. Cir. 2016) (explaining that where an “ordinary artisan would . . . be left with two design choices . . . [e]ach of these two design choices is an obvious combination”); Wyers v. Master Lock Co., 616 F.3d 1231, 1241 (Fed. Cir. 2010) (holding that a motivation to combine and a reasonable expectation of success exist when “it is simply a matter of common sense” to combine known elements of the prior art to solve a known problem). g. Conclusion The record supports a finding that a person of ordinary skill in the art would have understood Figure 1 to teach element 11a as composed of j-leads. The record also supports a finding that a person of ordinary skill in the art would have understood that at the relevant time, both stamping j-leads and depositing/etching were conventional methods for creating metal leads. Based on either of these findings, we agree with Petitioner that a person of ordinary skill in the art would have understood that Yamazaki teaches the cathode/anode limitation of claim 1. For the same reasons given in our Final Decision, we find that the combination of Yamazaki and Schubert teaches the other limitations of claim 1 and that an ordinarily skilled artisan would have had reasons, with rational underpinning, to combine the references, and the skilled artisan would have had a reasonable expectation of success. Final Dec. 28–42.” slip op. at 21

  Patent outcomesUS 10,644,213 unpatentable
  § 103 obviousnesscites KSR
  Patents in suitUS 10,644,213
• Innoscience (Zhuhai) Technology Company, Ltd. / Innoscience America, Inc. v. Efficient Power Conversion CorporationAll claims unpatentable
  PTAB · Mar 25, 2025 · IPR2023-01384 · APJ Jeffrey W Abraham · IPR · Final written decision

  Claims 1–7 are unpatentable as obvious over Yoshida and Saxler; the Board did not reach the alternative grounds.

  RulingsFinal written decision

  • Skill levelOther

    “In light of the record before us, we determine that we do not need to reach a specific finding regarding the level of ordinary skill in the art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown”) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)).” slip op. at 13

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner

    “In the Institution Decision, we declined to adopt Petitioner’s proposed construction of the “side surfaces” limitation and determined that it was not necessary to further construe this term because “[t]he parties do not dispute that the language ‘side surfaces extending horizontally’ encompasses a gate material with sloped side surfaces as depicted in Figure 5 of the ’335 patent.” Inst. Dec. 11–16 (citing Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017); Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)). We invited the parties to address this limitation further during the course of this trial, but neither party provided additional evidence or argument regarding the “side surfaces” limitation. Inst. Dec. 16; see generally PO Resp.; Reply; Sur-reply. Accordingly, we maintain our determination from the Institution Decision that we do not need to construe the “side surfaces” limitation. Inst. Dec. 15– 16.” slip op. at 14

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “This evidence, particularly the language in the ’335 patent itself, undermines Patent Owner’s argument that “[t]he process for forming gate ledges using separate masks instead of the self-aligned process disclosed in the ’335 patent cannot produce ledges that are ‘substantially symmetric.’” PO Resp. 39 (emphasis added); see also PO Resp. 42–43 (arguing that a gate structure with ledges having substantially equal widths is “not achievable” without using a single photo-mask process). We have considered the evidence presented by Patent Owner and Dr. Schubert in support of Patent Owner’s arguments. PO Resp. 38–43; Ex. 2005 ¶¶ 49–51. We, however, are unable to discern sufficient evidence supporting a conclusion that using separate masks cannot produce ledges that are substantially symmetric, particularly when the ’335 patent suggests otherwise. See Ex. 1001, 4:60– 63 (referring only to the “possibility of misalignment”). Even if, as Patent Owner and Dr. Schubert contend, misalignment “naturally” occurs when using a two-mask process, that does not foreclose the possibility that the” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner

    “It is well settled that “[a] reference does not teach away . . . if it merely expresses a general preference for an alternative invention but does not ‘criticize, discredit or otherwise discourage’ investigation into the invention claimed.” DePuy Spine, Inc. v. Medtronic Sofamor Danek, Inc., 567 F.3d 1314, 1327 (Fed. Cir. 2009) (quoting In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004)). Furthermore, “teaching that a composition may be optimal or standard does not criticize, discredit, or otherwise discourage” slip op. at 31

  Patent outcomesUS 10,312,335 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,312,335
• Innoscience (Zhuhai) Technology Company, Ltd / Innoscience America, Inc. v. Efficient Power Conversion CorporationAll claims unpatentable
  PTAB · Mar 18, 2025 · IPR2023-01381 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 1–3 and 7–9 are unpatentable as obvious over Uemoto and Smith; the motion to amend is granted, and proposed substitute claims 13 and 14 are not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In order to determine whether an invention would have been obvious at the time the application was filed, we consider the level of ordinary skill in the pertinent art. Graham, 383 U.S. at 17. In assessing the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC, Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (quotation omitted). Petitioner contends a person of ordinary skill in the art “would have possessed at least a four-year degree in electrical engineering, chemical engineering, physics, or material science, or a closely related field, and at least two years of experience in semiconductor device design or fabrication, including the processing of semiconductor materials, analysis of device operation, or the development of new device topologies.” Pet. 5–6. Petitioner contends “[a]dditional education could substitute for professional experience and vice versa.” Id. at 6. Patent Owner contends that a person of ordinary skill in the art would have had “at least a four-year degree in electrical engineering, physics, material science, or a closely related field, and three years of professional work experience in the epitaxial growth, design, and fabrication of semiconductor electronic devices, including those of GaN.” PO Resp. 7 (citing Ex. 2009 ¶ 82). Upon review of the evidence of record and the parties’ arguments, we adopt Petitioner’s definition of the person of ordinary skill in the art as it is consistent with the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (holding that the prior art itself can reflect the appropriate level of ordinary skill in the art). We note, however, that the conclusions reached in this Decision would be the same under either proposed definition of the ordinarily skilled artisan. See Ex. 2009 ¶ 83 (Dr. Schubert testifying that his opinions would be the same under either proposed definition); Ex. 1033 ¶ 9 (Dr. Shealy testifying that the differences in proposed definitions of the ordinarily skilled artisan “would not change the outcome of the invalidity analysis in any material manner”); PO Resp. 7; Pet. Reply 1.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “compensated GaN layer above the barrier layer, and a gate contact above the compensated GaN layer.” Ex. 1001, 5:12–18. Petitioner contends the term “compensated” indicates that the step of compensating the GaN layer has already occurred, such that the term “compensated GaN layer” should be construed as a “‘[d]oped GaN layer formed with a step to passivate its impurities’ which is a ‘product-by-process’ limitation.”5 Pet. 12–14. And, because compensation with hydrogen was the “critical step” distinguishing the claims from the prior art, and because hydrogenation in as-grown III-nitride materials had been well known for over a decade by 2009, Petitioner contends “compensated” “cannot be interpreted as mere hydrogen presence in as-grown material, a well-known property of doped GaN.” Id. at 15. Patent Owner contends “compensated GaN material” should be construed as “a semiconductor GaN gate material in which one type of impurity (for example, donor) cancels the electrical effects of the other type of impurity (for example, acceptor).” PO Resp. 11 (citing Ex. 2009 ¶ 92) (emphasis added). Patent Owner contends this construction is consistent with the IEEE dictionary, which defines “compensated semiconductor” as 5 Given that product-by-process steps in a device claim are not entitled to patentable weight, Petitioner contends “the prior art only need show a material with passivated impurities to show unpatentability, not the step to achieve it.” Pet. 15–16. “[a] semiconductor in which one type of impurity or imperfection (for example, donor) partially cancels the electric effects of the other type of impurity or imperfection (for example, acceptor).” PO Resp. 14 (quoting Ex. 2004). Patent Owner contends its construction is also consistent with the written description of the ’294 patent, which explains that a compensated GaN material is part of the gate and includes a p-type impurity that imparts an electrical effect (i.e., conductivity), as well as a second impurity, e.g., hydrogen, that partially cancels the electrical effect of the p-type impurity, rendering the layer semi-insulating. Id. at 14–15 (citing Ex. 1001, 3:10–13, 3:43–45). On this record, we construe “compensated GaN layer” as “a GaN layer in which one type of impurity (for example, donor) partially cancels the electric effects of the other type of impurity (for example, acceptor).” This is consistent with the disclosures of the ’294 patent, the IEEE dictionary definition, and the construction ultimately adopted by the ITC. Ex. 2004, 3; Ex. 1049, 16–17 (ITC construing “compensated GaN layer” to mean “a GaN layer in which one type of impurity partially cancels the electrical effects of another type of impurity”); Ex. 1001, 3:43–45 (explaining that the compensated GaN layer of the ’294 patent is formed through the “passivation of a p-type impurity using hydrogen”). For the reasons set forth below, however, we decline to construe “compensated GaN layer” as a product-by-process claim term (as asserted by Petitioner), or to limit the compensated GaN layer to a gate material (as asserted by Patent Owner).” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageDisclaimer not foundDecided for petitioner

    “There are two exceptions to the general rule that we apply the ordinary and customary meaning of a claim term: (1) when a patentee sets out a definition and acts as his own lexicographer, or (2) when the patentee disavows the full scope of a claim term either in the specification or during prosecution. See Thorner, 669 F.3d at 1365. The standards for lexicography and disclaimer, however, are “exacting.” Id. at 1366. There is no argument that the patentees acted as their own lexicographer to redefine the term “compensated GaN layer.” With respect to disavowal, a “patentee may demonstrate intent to deviate from the ordinary and accustomed meaning of a claim term by including in the specification expressions of manifest exclusion or restriction, representing a clear disavowal of claim scope.” Thorner, 669 F.3d at 1366 (quoting Teleflex, Inc. v. Ficosa N. Am. Corp., 299 F.3d 1313, 1325 (Fed. Cir. 2002)). As noted by Patent Owner, the title of the ’294 patent is, in part, “Compensated Gate MISFET” and much of the discussion of the ’294 patent is of a compensated GaN layer that is directly below the gate contact and above a barrier layer and operates in conjunction with the gate contact to control the on/off state of the transistor. PO Resp. 12–14. We are presented with insufficient argument or evidence to conclude, however, that these disclosures rise to the level of a disclaimer. For example, although the title of the ’294 patent is directed to a “Compensated Gate MISFET,” claim 1 is more broadly directed to “[a] column III Nitride transistor.” Ex. 1001, 5:12, code (54). Nor are we directed to an expression or statement of manifest exclusion in the ’294 patent that would serve to disclaim any “compensated GaN layer” that is not directly below the gate and/or that does not function in concert with the gate electrode to control the on/off state of the transistor. See Thorner, 669 F.3d at 1366. With respect to the stated goals of the invention, as noted by Patent Owner, one of the primary purposes of the compensated GaN layer of the ’294 patent is to reduce gate leakage and gate capacitance. Ex. 1001, 2:13– 19, 3:18–21 (“[U]sing a compensated semiconductor layer 38 leads to low gate leakage during device operation.”). We cannot use the goals of the invention, however, to rewrite the claims or insert terms that are not present. See Thorner, 669 F.3d at 1366. Moreover, the prior art of record indicates that a compensated GaN layer that is below the gate contact and above a barrier layer, but not part of the active gate structure, may also “decrease the leakage current between the gate and the drain.” Ex. 1006 ¶¶ 44 (“Even when a positive bias of 5 V or higher is applied to the gate electrode, no significant gate-leakage current is observed.”), 61. As such, evidence of record suggests that a person of ordinary skill in the art would have understood that one of the primary goals disclosed in the ’294 patent is achieved regardless of whether the compensated GaN layer is part of the gate, or simply in close vicinity to the gate. In view of the foregoing, we are not persuaded that the written description of the ’294 patent indicates that the “compensated GaN layer” must be part of the gate structure.” slip op. at 17

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “To be probative, Patent Owner must prove there is a nexus between the presented evidence and the merits of the claimed invention. See Demaco Corp. v. F. Von Langsdorff Licensing Ltd., 851 F.2d 1387, 1392 (Fed. Cir. 1988). A rebuttable presumption of nexus applies when the “patentee shows that the asserted evidence is tied to a specific product and that the product ‘is the invention disclosed and claimed.’” Fox Factory, Inc. v. SRAM, LLC, 944 F.3d 1366, 1373 (Fed. Cir. 2019) (quoting Demaco, 851 F.2d at 1392). “That is, presuming nexus is appropriate ‘when the patentee shows that the asserted objective evidence is tied to a specific product and that product embodies the claimed features, and is coextensive with them.’” Id. (quoting Polaris Indus., Inc. v. Arctic Cat, Inc., 882 F.3d 1056, 1072 (Fed. Cir. 2018)). If the praise is not limited to the features of the claimed invention, the patent owner may still prove nexus “by showing that the evidence of secondary considerations is the ‘direct result of the unique characteristics of the claimed invention.’” Id. at 1373–74 (quoting In re Huang, 100 F.3d 135, 140 (Fed. Cir. 1996)). Patent Owner contends that the compensated gate of the ’294 patent “was a breakthrough invention and resulted in the first commercially viable enhancement-mode GaN transistor.” PO Resp. 60 (citing Ex. 2009 ¶¶ 192– 193, 197; Ex. 2021). Patent Owner further contends that this achievement required the counter-intuitive use of a compensated gate material in the gate structure, and represented “a technological leap that laid the foundation for viable enhancement-mode GaN transistors.” Id. at 61–62. For this achievement, Patent Owner contends the inventor, Dr. Alex Lidow, received the 2015 SEMI Award. Id. at 60 (citing Ex. 2021). Upon review of Patent Owner’s evidence and the parties’ arguments, we find that Patent Owner’s objective indicia evidence is entitled to little, if any, weight. The evidence of praise relied upon by Patent Owner is not clearly linked to the claimed invention or any particular product having each of the claimed features of the ’294 patent. Ex. 2021. For example, the 2015 SEMI award was provided to Dr. Lidow “for commercialization of GaN power devices.” Id. An article explaining the award indicates that “high cost” previously “limited [the] commercial success” of GaN technologies, but Dr. Lidow was able to overcome these issues, “from resolving packaging limitations to establishing a low-cost supply chain,” “through persistence.” Id. This praise is not demonstrably linked to the claimed invention or any particular device, and does not mention the use of a compensated gate, or any other relevant feature recited in the claims. In view of the foregoing, we determine that Patent Owner’s objective evidence of non-obviousness is entitled to little, if any, weight.” slip op. at 20

  Patent outcomesUS 8,350,294 unpatentable
  Claim construction§ 103 obviousness§ 112 disclosurecites KSR · Graham
  Patents in suitUS 8,350,294
• Amphenol Corp. v. PPC Broadband, Inc.All claims unpatentable
  PTAB · Feb 19, 2025 · IPR2023-01363 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 1, 2, and 10–13 are unpatentable as obvious over the stated combinations of Holmberg, Battey, Blankenship, and Cowen.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends a person of ordinary skill in the art “would have had at least a bachelor’s degree in electrical engineering, computer engineering, or a related field, and at least 1 year of experience related to communication networks or the equivalent.” Pet. 7. Petitioner further contends that “[a]dditional education could substitute for professional experience or significant experience in the field could substitute for formal education.” Id. at 7–8 (citing Ex. 1003 ¶¶ 29–31). Dr. Eldering agrees that one of ordinary skill in the art “would have had at least a bachelor’s degree in electrical engineering, computer engineering, or a related field, and at least one year of experience related to communication networks or the equivalent.” Ex. 2001 ¶ 24. According to Dr. Eldering, “[a] person with less relevant practical experience but with additional experience would also qualify.” Id. Patent Owner contends that” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “Although Patent Owner disagrees with Petitioner’s construction, it contends “the Board need not resolve this claim construction dispute because Petitioner’s proposed grounds 1-5 are all insufficient under either construction.” PO Resp. 19. Upon review of the parties’ arguments and the prior art of record, we determine that no claim terms require express construction for purposes of this decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). For example, we discuss below in Section III.G why we do not reach the claim construction issue presented by Petitioner.” slip op. at 11

  • Expert testimonyPetitioner expert creditedDecided for petitioner

    “We find that Holmberg expressly contemplates using its wall box within multi-dwelling units, notes that multi-dwelling wall boxes in the prior art were “typically provided” on every floor, and discloses that the multi-dwelling wall boxes would contain optical couplings for each resident on a given floor. Ex. 1004 ¶¶ 7, 34; Pet. Reply 8–10. In view of these disclosures, we credit the testimony of Dr. Kiaei that one of ordinary skill in the art would have sought to use Holmberg’s wall box in multi-dwelling units and would have seen a need to access the area behind spice tray 230 to connect and disconnect subscribers. Ex. 1003 ¶ 92; Ex. 1033 ¶¶ 7–8. Moreover, even if Holmberg were limited to mid-span locations and distributing drop cables, as opposed to distribution cables for individual subscribers, as asserted by Patent Owner, Patent Owner does not dispute that a technician would still need periodic access to the area behind splice tray 230 in these mid-span devices. Tr. 38:3–39:1 (counsel agreeing that one would need to access the area behind splice tray 230 in Holmberg, albeit in “rare occasions”); Ex. 1003 ¶¶ 90–92; Ex. 1033 ¶¶ 7–8. Thus, whether used in the manner contemplated by Petitioner or Patent Owner, Petitioner persuasively demonstrates that access to the space behind splice tray 230 in Holmberg would be necessary. With access behind splice tray 230 required, Petitioner persuasively demonstrates that one of ordinary skill in the art would have seen a benefit to replacing Holmberg’s fasteners or screws with a hinged connection, such as that disclosed in Battey, to allow easier access to the area behind the splice tray. Pet. 41 (citing Ex. 1005 ¶ 39 (disclosing that a rotatable splice tray or shelf would “provide[] full and convenient access to the splice tray”)). First, Petitioner and Dr. Kiaei persuasively demonstrate that once the fibers of Holmberg are routed from behind splice tray 230 and the distribution cables spooled on this tray, a technician could not reasonably access fiber optic cables stored behind splice tray 230 without releasing or opening splice tray 230. Pet. Reply 14–15 (citing Ex. 1023, 60:20–61:15); Ex. 1033 ¶¶ 31–32. Second, Petitioner persuasively demonstrates that without a hinged connection, the technician would have to either hold the splice tray of Holmberg with one hand while performing the necessary routing and splicing steps, two screws would need to remain in place (essentially replicating a hinge), or the tray would have to be left to dangle, supported only by the routed and spliced fibers. Pet. Reply 19–20.” slip op. at 22

  • Strike new argumentNew argument consideredDecided for petitioner

    “Allegedly New Arguments on Reply Patent Owner contends that Petitioner’s arguments regarding the benefits of a hinged connection when performing the splicing and routing steps should be dismissed or ignored because they were improperly raised for the first time on reply. Sur-reply 19–20. We disagree. The Petition asserts that one of ordinary skill in the art would have sought to add a hinged connection, such as that disclosed in Battey, in Holmberg and would have seen a benefit to so doing. Pet. 40–44. Petitioner did not change its proposed combination or its stated rationale in its Reply. Rather, in response to Patent Owner’s counter-arguments, Petitioner expands upon the benefits of its proposed combination, i.e., the substitution of a hinged connection in place of fasteners. Pet. Reply 15–21. This is permissible, as a reply may properly expand on or extend previously raised arguments relating to the motivation to make the proposed changes to the prior art. See Rembrandt Diagnostics, LP v. Alere, Inc., 76 F.4th 1376, 1385 (Fed. Cir. 2023) (explaining that the reply arguments properly relied on the same legal ground, the same prior art references, and same legal argument—the motivation to make the proposed changes to the prior art reference).” slip op. at 25

  Patent outcomesUS 9,008,483 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,008,483
• Opticis Co., Ltd. v. Inneos LLCAll claims unpatentable
  PTAB · Jan 29, 2025 · IPR2023-01256 · APJ Terry J Owens · IPR · Final written decision

  Claims 1, 2, 6, 7, and 9 are unpatentable as obvious over Kurita and Lemoff, with the Board declining to reach the remaining grounds.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for petitioner

    “We accept the level of ordinary skill in the art stated by Petitioner and agreed with by Patent Owner with the exception of the open-ended language appears consistent with the ’416 patent and the prior art of record.” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “describe elements that are not affirmatively recited in the claims, and in view of the “bedrock principle of patent law that the claims of a patent define the invention,” we conclude that none of the unrecited limitations identified by Patent Owner are required by the claims. See Thorner v. Sony Entm’t Am. LLC, 669 F.3d 1362, 1366 (Fed. Cir. 2012) (explaining that the standard for disavowal is “exacting,” and the use of “the present invention” is not necessarily sufficient to meet this standard).” slip op. at 12

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “art would not have modified Kurita in view of Lemoff because Lemoff positions the signal emitters near the fiber to emulate WDM without the need for an external optical multiplexer or a similar device and discourages using optical wavelength multiplexers for short distances because the complexity of the design is often cost prohibitive (PO Resp. 47–48), Lemoff does not appear to limit the usefulness of the fiber connector to any particular optical signal transmission distance. Petitioner relies upon Lemoff for a suggestion to combine Lemoff’s fiber connector configuration teachings with Kurita’s multiplexer teachings to enable fibers to be plugged Fig. 2) (Pet 29, 31; Reply 17–18). Regarding Patent Owner’s argument that one of ordinary skill in the art would not have combined Lemoff’s receptacle and ferrule with discrete components in Kurita because the fiber would need to be manually fixed and aligned with or without a ferrule and, therefore, would serve no purpose (PO Resp. 48), Lemoff’s fiber connector appears to fix and align the fiber adequately for wavelength division multiplexing without manual fixation or alignment being required (Ex. 1006, 5:65–6:2, Fig. 2; Reply 18). The challenged claims do not require any greater degree of fixing and alignment than that provided by Lemoff’s fiber connector. Regarding Patent Owner argument that Lemoff’s device is not physically combinable with Kurita’s WDM multiplexer due to Lemoff’s device’s small size (PO Resp. 47–48; Reply 17–18), “[t]he test for obviousness is not whether the features of a secondary reference may be bodily incorporated into the structure of the primary reference.... Rather, the test is what the combined teachings of the references would have suggested to those of ordinary skill in the art” (In re Keller, 642 F.2d 413, 425 (CCPA 1981)). Accordingly, we are not persuaded by Patent Owner’s argument.” slip op. at 26

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “stopped single optical fiber because fixing it in place does not passively align it with the optical components (PO Resp. at 35–37) is not persuasive because fixing Kurita’s fiber (40) in place in accord with Lemoff’s teaching regarding the ferrule (255) inserted until being stopped by the receptacle (260) (Ex. 1006, 5:50–6:15, Fig. 2) would align Kurita’s optical array (20), and lens (30)) (Ex. 1004 Fig. 3) passively in the same manner that Lemoff’s ferrule (255), after being inserted until stopped by the receptacle (260), passively aligns the optical fiber (250) with the optical components (optical imaging element 220 and light emitters within emission apertures 120) (Ex. 1006, 5:50–6:15, Fig. 2; Reply 15–16). Regarding Patent Owner’s argument that the light from each of Kurita’s lasers (11) depicted in Figure 3 cannot pass through a separate focusing lens (30) pie shaped sector because the lasers (11) and collimating lenses (21) are arranged linearly rather than being arranged about a circular axis (PO Resp. at 37–42), we do not agree. Claim 1 requires “focusing means having n separate radial sectors on its surface, and each of said n collimated beams passes through a separate one of said n sectors of said focusing means” (Ex. 1001, 5:34–37), claim 2 requires “four lasers and four collimating lenses are each formed in a two-dimensional, two by two array [centered on the focal axis of lens 30], wherein said focusing means is a single focusing lens, and wherein each radial sector is a pie-shaped quadrant” (id. at 5:41–44), and claim 7 requires “focusing means having four separate quadrants on its surface, and each of said four collimated beams passes through a separate one of said quadrants of said focusing means” (id. at 6:35–38). Kurita meets those claim requirements. Kurita’s two by two array (10A) of lasers (11), collimating lens (21) array (20), and focusing lens (30) are shown in Kurita’s Figure 3 (cropped) as follows: The image is a portion of Kurita’s Figure 3 showing Kurita’s laser array, collimating lens array, and focusing lens (30). Relative to a point at the center of the laser array (10A) or the collimating lens array (20), each laser (11) and each collimating lens (21) is in a separate quadrant that can be a quadrant of a circle (pie-shape) on lens 30 (Reply 12– 13, Ex. 1003 ¶¶ 85–91).” slip op. at 23

  Patent outcomesUS 7,198,416 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 7,198,416
• Nespresso USA, Inc. v. K-Fee System GmbHAll claims unpatentable
  PTAB · Sep 10, 2024 · IPR2023-00485 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 1–10 are unpatentable as obvious over the combined disclosures of Yoakim, Jarisch, Rossi, and Castellani.

  RulingsFinal written decision

  • Skill levelSkill level board ownPetitioner expert creditedDecided for petitioner

    “have a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products.” Pet. 31 (citing Ex. 1003 ¶ 40). In the Institution Decision, we preliminarily determined that a person of ordinary skill in the art “would have a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products, as well as experience with sensors for recognizing an identifier.” Inst. Dec. 8 (emphasis added). Neither party disputes this conclusion. PO Resp. 9; see generally Pet. Reply. As such, we adopt our preliminary definition of the ordinarily skilled artisan for purposes of this Final Written Decision.” slip op. at 8

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner

    “designing medical devices and components, and that those experiences represent work designing products similar to mechanical beverage systems, Patent Owner fails to direct the Board to evidence sufficient to establish that this experience, in the aggregate, amounts to at least “five years” or involved “experience with sensors for recognizing an identifier.” Inst. Dec. 8 (adopting Patent Owner’s own proposed definition of one of ordinary skill in the art); see Sur-reply 3–4 (citing Ex. 1066, 34:16–35:9; Ex. 1067, 101:3– 12, 102:20–104:9; Ex. 2017 ¶¶ 3–4, 8–10) (failing to establish adequately, if at all, how Dr. Howle’s qualifications include the requisite minimum five-year period of relevant design experience). Accordingly, we determine that Dr. Howle is not qualified to offer expert testimony from the perspective of a person having ordinary skill in the art in this proceeding.10 See Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1376–77 (Fed. Cir. 2022). The Federal Circuit has explained that “[t]o offer expert testimony from the perspective of a skilled artisan in a patent case,” including the issue of patent “validity,” the “witness must at least have ordinary skill in the art.” Id. (Board’s emphasis). “Without that skill, the witness’[s] opinions are neither relevant nor reliable.” Id. at 1377.” slip op. at 13

  • Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner

    “Second, Patent Owner and Dr. Howell assert that a person of ordinary skill in the art “would have understood upon reading the second German application that the capsule features described would be intended to be combinable with each of the described embodiments.” PO Resp. 40; Ex. 2017 ¶ 61. But Patent Owner and Dr. Howell do not explain how a barcode could be used in the devices depicted in Figures 16–18, which place the detection means 2.4.2 on the outer circumference of the flange (not its underside) and rely on toothed-rings physically interacting with either the chamber, retaining arms, or a pinion. Ex. 1047, 12:22–31, 13:8–18. Indeed, the second German priority application explains that means 2.4.2 physically interacts with retaining arms 30 (embodiments of Figures 16 and 17) or a pinon (embodiment of Figure 18), and if means 2.4.2 were not present in these embodiments the capsule would either “drop through into a waste container” or could not be inserted through the insertion shaft. Id. at 12:22– 27, 13:9–12, 13:16–35 (noting that in the embodiment disclosed in Figure 18 a pinon interacts with means 2.4.2 and only when means 2.4.2 “is formed complementary to the teeth of the means” can the capsule be inserted). At no point does the second German application identify means 2.4.2 as a barcode or suggest a barcode could be used as the detection means. The second German application also states that A person skilled in the art is also aware that for example the insertion shaft may also contain a sensor, for example a camera, clear, however, that element 27 is part of the brewing chamber, and not the capsule. Ex. 1047, 12:27–31, 13:5–8, 13:21–26, 15:36. Thus, we are not persuaded that the toothed ring is in fact on the bottom side of the flange. which senses the shape of the means 2.4.2. For example, it would be possible, in the present case, for the shape of the teeth and/or the spacing between the same to be sensed. This signal, in turn, is passed to a control means, which frees, for example, the brewing chamber if the capsule is the correct one. Ex. 1047, 14:11–19. Again, despite using a camera to determine if a capsule is “the correct one,” the second German application does not suggest using a barcode in place of the toothed-ring structure, or suggest moving the location of the detection means 2.4.2 from the outer surface to the underside of the flange. This reinforces that the inventors did not contemplate using a barcode in the embodiments depicted in Figures 16–18.” slip op. at 23

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “As asserted by Petitioner, Jarisch teaches how to move a code in a centrifugal brewing system to the bottom of the flange and how to configure a light-conductive material so that the detector’s light source will reach the bottom of the flange. Pet. 48–49; Pet. Reply 23–24 (Ex. 1003 ¶¶ 184–185; Ex. 1005 ¶¶ 82–84, Fig. 5). And, although Figure 61 of Yoakim discloses a flare in its brewing chamber, bodily incorporation is not required, and we are directed to no persuasive argument or evidence that Yoakim could not be configured with a straight chamber, as generally depicted in Figure 5 of Jarisch. Pet. Reply 24 (noting that Dr. Howle’s testimony on this subject is “conclusory” and depends on “bodily incorporation”). As such, we credit the testimony of Mr. Jobin that a person of ordinary skill in the art would have sought to place the code at the bottom of the flange and would have had a reasonable expectation of success in so doing.17 Ex. 1003 ¶ 184. Patent Owner further contends that Yoakim requires that the capsule holder be capable of receiving a set of multiple volume capsules and that 17 As discussed above, Mr. Jobin has extensive experience in the design of brewing devices. Conversely, Dr. Howle has limited experience in this field and is not one of ordinary skill in the art. Although Mr. Jobin’s testimony is more persuasive regardless of the discrepancy in experience between the two declarants, when this difference in design experience is considered, it only serves to increase the weight we give to Mr. Jobin’s testimony. there is a “snug fit” to avoid “unbalances.” PO Sur-reply 8 (citing Ex. 1004 ¶¶ 205, 479, 484, 507, 512). According to Patent Owner, Petitioner does not explain adequately how the use of Jarisch’s “straight chamber” with a capsule holder that does not engage with the side wall of the capsule would allow insertion of the multiple volume capsules or permit a “snug fit.” Id.; PO Resp. 28. Patent Owner’s assertion that Yoakim discloses the use of certain capsules that might not fit into a device with Jarisch’s non-flared structure is ineffective to undercut the sufficiency of Petitioner’s showing on this point. As noted by Patent Owner, Yoakim discloses the use of certain capsules which might not fit into a device with Jarisch’s non-flared structure. But Petitioner is not seeking a bodily incorporation of Yoakim and Jarisch, and other embodiments of Yoakim do not require the type of flared capsule identified by Patent Owner. Ex. 1004, Fig. 63. Moreover, we are directed to no persuasive evidence that Jarisch’s lack of contact between the capsule side wall and the holder would render the device inoperable or even less effective. Id. (citing Ex. 2019, 36:18–37:6; Ex. 1005 ¶ 23 (Jarisch explaining that its device includes a capsule holding means and that the capsule may be successfully driven in rotation). As such, we credit the testimony of Mr. Jobin that one of ordinary skill in the art would have understood how to design the chamber of Yoakim to allow reading of a barcode on the underside of the flange and that this design would allow for successfully receiving single-serve capsules and driving them in rotation. Ex. 1003 ¶¶ 182–184; Ex. 1005 ¶ 23.” slip op. at 39

  Patent outcomesUS 11,230,430 unpatentable
  § 103 obviousness§ 112 disclosurecites KSR · Graham
  Patents in suitUS 11,230,430

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.