• Smaxtec Inc. / Smaxtec Animal Care GmbH v. St Reproductive Technologies, LLCAll claims unpatentable
  PTAB · Jan 16, 2026 · IPR2024-01067 · APJ Andreas Baltatzis · IPR · Final written decision

  Claims 5–7, 9, and 10 are unpatentable: claims 5 and 6 are anticipated by Harvey and Riskey, claim 7 is obvious over Harvey and Rettedal, and claims 9 and 10 are obvious over Harvey and …

  RulingsFinal written decision

  • BurdenNot shown unpatentable

    “Considering the entire record, we determine that Petitioner “did not make out its obviousness case in its petition” and its arguments on reply “effectively abandoned its petition in favor of a new argument.” Wasica at 1286. To the extent Petitioner asserts the claims would have been obvious over Harvey and Riskey in the Petition, it does so using a merely conclusory statement that “[t]o the extent Patent Owner alleges that either Harvey or Riskey fails to teach any claim element, that element is provided by the other reference.” See Pet. 42; Wasica at 1286. And, as discussed in our Institution Decision, the Petition at a minimum does not explain what reference is the primary versus second reference, and what elements should be combined to reach the claimed invention. See Sisvel, 82 F.4th at 1364. reference to be modified with Riskey’s bolus and data compression. See Pet. Reply 15–17. Rather than explaining how its original petition was correct, Petitioner’s subsequent arguments amount to an entirely new theory of prima facie obviousness absent from the Petition. See Wasica, 853 F.3d at 1286; see also Intelligent Bio-Sys., Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1369 (Fed. Cir. 2016) (“the expedited nature of IPRs bring with it an obligation for petitioners to make their case in their petition to institute”). We decline to engage in this new argument. Accordingly, we determine that Petitioner has not met is burden to show that claims 5 and 6 would have been obvious over Harvey and Riskey. G. Asserted Obviousness of Claim 7 over Harvey and Rettedal” slip op. at 54

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner

    “Riskey discloses “said sensor signal varies based on a corresponding change in one or more physiological parameters of said ruminant animal” (limitation 5[B]). We find Riskey’s description of temperature sensors to be persuasive evidence on this issue. Riskey discloses sensors for measuring changing animal characteristics, e.g., temperature, over time. Ex. 1005 ¶¶ 35, 44; see also id. ¶¶ 75, 76 (detecting temperature changes). We further credit Dr. Young’s testimony that one skilled in the art would understand that generated sensor signals, e.g., temperature, would change over time, whereby the sensor signal varies based on any corresponding change in the ruminant physiological parameter that the signal represents. Ex. 1002 ¶¶ 84, 85; see Cont’l Can Co. USA v. Monsanto Co., 948 F.2d 1264, 1269 (Fed. Cir. 1991) (“This modest flexibility in the rule that ‘anticipation’ requires that every element of the claims appear in a single reference accommodates the reference; that is, where technological facts are known to those in the field of the invention.”). We consider Dr. Kan’s testimony that Riskey is silent as to details about the sensor signal, but are not persuaded because the testimony appears to contradict Riskey’s disclosure of a bolus including sensors for monitoring changes in animal characteristics, generating animal characteristic messages, i.e., signals, and wirelessly transmitting data corresponding to the monitored characteristics. See Ex. 2006 ¶¶ 170–174; Ex. 1005 ¶¶ 25, 63, 67, 68, 75–78, 101. Given Riskey’s express description of monitoring animal characteristics over time, we agree with Petitioner’s argument that Riskey discloses that said sensor signal varies based on changes to the animal’s physiological parameters.” slip op. at 16

  • Skill levelSkill level board ownOther

    “Petitioner asserts that a person of ordinary skill in the art (“POSA”) as of the claimed priority date would have “had at least a bachelor’s degree in electrical engineering or a related or equivalent field, and three or more years of experience researching, developing, designing and/or evaluating sensor systems for humans or other animals.” Pet. 5 (citing Ex. 1002 ¶ 35) (emphasis added). Patent Owner does not contest Petitioner’s characterization of the level of skill in the art. See PO Resp. 12 (citing Ex. 2006 ¶¶ 19–20). On the entire record, we determine this level of skill, with the exception of the open-ended phrases “at least” and “or more,” which we remove from Petitioner’s proposal, comports with the qualifications a person 5 In the present record, neither party presents arguments or evidence relating to secondary considerations.” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “We construe claim terms according to the standard set forth in Phillips v. AWH Corp., 415 F.3d 1303, 1312–17 (Fed. Cir. 2005) (en banc), i.e., as construed in a civil action under 35 U.S.C. § 282(b). See 37 C.F.R. § 42.100(b). Under Phillips, claim terms are afforded “their ordinary and customary meaning.” Id. at 1312. “[T]he ordinary and customary meaning of a claim term is the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention.” Id. at 1313. “Importantly, the person of ordinary skill in the art is deemed to read the claim term not only in the context of the particular claim in which the disputed term appears, but in the context of the entire patent, including the specification.” Id. Neither party expressly seeks a specific claim construction or definition for any claim term. See Pet. 10; PO Resp. 12. To the extent Patent Owner seeks to interpret claim 7 in view of the Specification, we address that argument in our discussion of claim 7, below. See infra, § III.G.3. For purposes of this Decision, we determine that no claim terms require express construction. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)). D. Asserted Anticipation of Claims 5 and 6 by Riskey” slip op. at 11

  Patent outcomesUS 10,231,644 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,231,644
• Silencerco Weapons Research, LLC v. Huxwrx Safety Co. LLCNo claims unpatentable
  PTAB · Dec 17, 2025 · IPR2024-01214 · APJ Sean P O’Hanlon · IPR · Final written decision

  Claims 2, 3, 6, 9, 12–14, 18, and 20 were not shown unpatentable; the motion to amend was granted for substitute claims 23, 26, 27, 29, 30, 32, 33, 37–40, and 42, and denied for …

  RulingsFinal written decision

  • Skill levelSkill level board ownOther

    “The level of ordinary skill in the art is “a prism or lens” through which we view the prior art and the claimed invention. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). The person of ordinary skill in the art is a hypothetical person presumed to have known the relevant art at the time of the invention. In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995). In determining the level of ordinary skill in the art, we may consider certain factors, including: “(1) the educational level of the inventor; (2) type of problems encountered in the art; (3) prior art solutions to those problems; (4) rapidity with which innovations are made; (5) sophistication of the technology; and (6) educational level of active workers in the field.” Best Med. Int’l, Inc. v. Elekta Inc., 46 F.4th 1346, 1353 (Fed. Cir. 2022) (quoting Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007)). “The patent’s purpose can also be informative.” Id.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “The ’750 patent states that “the fluid pathway can be a radially serpentine fluid pathway which causes the fluids received in the off axis chamber to flow back and forth around a radius of the off axis chamber,” also using “radially serpentine fluid pathway” to refer to this rotation around the chamber radius “while also traversing a length of the off axis chamber.” Ex. 1001, 4:34–41 (emphasis added). This is the only description of “radially” serpentine flow in the ’750 patent. Notably, the ’750 patent does not use “radially” or “serpentine” to describe a fluid pathway “which causes the fluids to spiral around the central chamber within the off axis chamber along a length of the off axis chamber,” instead referring to such a fluid pathway as a “helical fluid pathway.” Id. at 4:41–44. See CAE Screenplates, Inc. v. Heinrich Fiedler GmbH & Co. KG, 224 F.3d 1308, 1317 (Fed. Cir. 2000) (“In the absence of any evidence to the contrary, we must presume that the use of . . . different terms in the claims connotes different meanings.”); Bd. of Regents of the Univ. of Tex. Sys. v. BENQ Am. Corp., 533 F.3d 1362, 1371 (Fed. Cir. 2008) (“Different claim terms are presumed to have different meanings.”). Inst. Dec. 11–12. We explained that the flow path depicted above, which is equivalent to that of Figure 14 of the ’750 patent, “flows circumferentially about the central chamber.” Id. at 14. We maintain this interpretation. Stated differently, the depicted flow is around a longitudinal axis of the chamber. See MTA PG 6 (describing the flow path depicted above as “a back and forth flow path around a longitudinal axis of the off axis chamber; that is, a circumferentially serpentine pathway”); see also Ex. 2003 ¶ 40 (Dr. Neitzel describing the flow path depicted above as “a back and forth flow path around a longitudinal axis of the off axis chamber”). The flow is not around a radius of the chamber, which Patent Owner recognizes is required for a flow path to be radially serpentine. See PO Resp. 10 (“Patent Owner agrees with the Board’s conclusion in the [Institution Decision] that ‘radially serpentine’ as recited in the claims of the ’750 patent means a back and forth flow around a radius of the off axis chamber.” (citation modified)); PO Sur-reply 2 (agreeing that “radially serpentine” requires “a back and forth flow around a radius of the off axis chamber”).” slip op. at 14

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable

    “We agree with Patent Owner that neither Petitioner nor its witness, Mr. Nixon, has explained adequately how Thurler’s disclosure of its tube e being perforated for two thirds of its length “contemplates other lengths of perforations.” See Pet. 48; Ex. 1013 ¶ 212. Such conclusory assertions fail to apprise us of why an ordinarily skilled artisan would have been motivated to modify Thurler’s device in contradiction to Thurler’s explicit disclosure. We are also not persuaded by Petitioner’s proffered reasoning for modifying Thurler’s device. First, the modification is not a matter of design choice because the perforations allow the gases generated by firing the projectile to pass into the space between tubes e and g where they partially expand. See Ex. 1015, 1:84–91. Thus, modifying the number of perforations necessarily affects the flow of gases through the device. Next, neither Petitioner nor Mr. Nixon explains adequately how reducing the amount of perforation in tube e results in an increased fluid length. See Pet. 49; Ex. 1013 ¶ 213. Rather, although less fluid may enter into tube e with Petitioner’s modification, it appears that that fluid would travel the same distance along tubes e and h as in Thurler’s unmodified device. Finally, neither Petitioner nor Mr. Nixon explains adequately how limiting the amount of gases generated by firing the projectile from entering the expansion zones of tubes g and h provides any benefit. To the contrary, limiting the amount of gases in the manner suggested by Petitioner would reduce the suppression of such gases, resulting in a less effective device. Moreover, Thurler discloses that “there is still a space of a few millimeters between [tubes] e and g which is necessary” to prevent the application of “pressure on the projectile causing the same to deviate.” Ex. 1015, 1:106–2:3. Thus, Petitioner’s modification would not result in the passage of gases occurring only at the first three of Thurler’s tubular sleeves as asserted by Petitioner. Additionally, in the Institution Decision, we explained that Petitioner did not provide adequate reasoning to support the proposed modification of Thurler’s device regarding parent claim 1 to have concentric tubes around the central tube e. See Inst. Dec. 29–31. This shortcoming, which we maintain, carries through to dependent claim 6. Accordingly, for the foregoing reasons, Petitioner has not shown, by a” slip op. at 26

  • ScopeMotion to amend granted in partGranted in part

    “We agree with Petitioner that the amendment is broadening. Petitioner’s witness testified that he “wouldn’t call a BB gun a high energy device or a high energy weapon.” Paper 33, 18:4–6. Thus, per Petitioner’s witness, use of a BB gun would not be covered by claim 22, no matter what is discharged from the BB gun. However, if high energy material is discharged from that same BB gun, that use would be covered by proposed substitute claim 43 (assuming the other claim recitations were met). See id. at 21:10–12 (Dr. Neitzel agreeing that “if something produces a high energy material, it automatically is a high energy weapon”). Thus, by deleting “high energy device” and replacing that language with “weapon,” proposed substitute claim 43 impermissibly broadens the scope of claim 22. See Sisvel Int'l S.A. v. Sierra Wireless, Inc., 81 F.4th 1231, 1241 (Fed. Cir. 2023) (“But if a substitute claim ‘is broader in any respect it is considered to be broader than the original claim even though it may be narrower in other respects.’” (citation modified) (quoting Hockerson-Halberstadt, Inc. v. Converse Inc., 183 F.3d 1369, 1374 (Fed. Cir. 1999))); see also Lectrosonics, Paper 15 at 6 (“A patent owner may not seek to broaden a challenged claim in any respect that enlarges the scope of the claims of the patent . . . . Likewise, a proposed substitute claim may not remove a feature of the claim in a manner that broadens the scope of the claims of the challenged patent.”).” slip op. at 45

  Patent outcomesUS 8,286,750 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 8,286,750
• Smaxtec Inc. / Smaxtec Animal Care GmbH v. St Reproductive Technologies, LLCAll claims unpatentable
  PTAB · Nov 20, 2025 · IPR2024-00885 · APJ Jamie T Wisz · IPR · Final written decision

  Claims 1–4 and 15–25 are unpatentable: claims 1–2 are anticipated by Trevarthen, and the challenged claims are also obvious over the listed combinations.

  RulingsFinal written decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “Petitioner”) filed a Petition requesting an inter partes review of claims 1–4 and 15–25 (the “challenged claims”) of U.S. Patent No. 8,823,515 B2 (Ex. 1001, “the ’515 patent”). Paper 1 (“Pet.”). ST Reproductive Technologies, LLC (“Patent Owner”) filed a Preliminary Response. Paper 6 (“Prelim. Resp.”). With our authorization, Petitioner filed a Preliminary Reply (Paper 10, “Prelim. Reply”) and Patent Owner filed a Preliminary Sur-Reply (Paper 13, “Prelim. Sur-Reply”). Upon consideration of these filings and the preliminary evidence of record, we determined that Petitioner had demonstrated a reasonable likelihood that it would prevail with respect to at least one of the challenged claims of the ’515 patent (Paper 16, “Institution Decision” or “Inst. Dec.”). Thus, we instituted review with respect to all of the challenged claims. slip op. at 2

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “statistics in the absence of evidence of unique downloads or individuals. Even if the download numbers do not exactly represent unique downloads by unique individuals, the evidence shows that Trevarthen was downloaded, and therefore distributed, prior to the filing date of the ’515 patent. Accordingly, we find this evidence weighs in favor of Trevarthen’s public accessibility.” slip op. at 20

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “retrieves sensed animal temperature information from the RFID device” and “further teaches that these temperature measurements are analyzed to detect ‘fluctuations,’ ‘a rise,’ and/or ‘anomalies’ that might indicate illness or oestrus.” Id. at 16 (citing Ex. 1005, 121–122). Accordingly, Petitioner asserts that a “POSA would understand that to perform such analysis, the animal temperature information for each animal is necessarily stored in the” slip op. at 36

  • ExcludeMotion to exclude, deniedOther

    “Patent Owner moves to exclude Exhibits 1040, 1041, and 1044. Paper 36. We do not rely on any of Exhibits 1040, 1041, and 1044 to decide this matter. Thus we dismiss Patent Owner’s motion to exclude as moot.” slip op. at 82

  Patent outcomesUS 8,823,515 unpatentable
  § 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,823,515
• CQV Co., Ltd. v. Merck Patent GmbHNo claims unpatentable
  PTAB · Oct 14, 2025 · PGR2021-00054 · APJ Kristina M Kalan · PGR · Remand

  Claims 1–22 were not shown unpatentable because Sample C was not proven publicly available as prior art, and the original decision found the remaining grounds insufficient.

  RulingsRemand decision

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication not establishedNot shown unpatentable

    “We agree with Patent Owner that Petitioner’s evidence in Kuntz (Ex. 1026), the Annual Report (Ex. 1028), Masuko (Ex. 1029), and Pfaff (Ex. 1034) is insufficient to show that Xirallic® Sample C was available to the public before the effective filing date of the ’861 patent. Petitioner has not asserted, nor do we find, that any of these documents refer to or describe the lot of Xirallic® from which Sample C was taken. See Final Dec. 26. Kuntz, the Annual Report, Masuko, and Pfaff may support a finding that the Xirallic® line of products was available to the public, but these documents do not support a finding that the lot of Xirallic® from which Sample C was taken was available to the public. We also agree with Patent Owner that the Technical Data Sheets (Exs. 1005–1010), Certificates of Analysis (Exs. 1011–1017), and Material Safety Data Sheet (Ex. 1025) are insufficient to show that Xirallic® Sample C was available to the public. Petitioner has not asserted, nor do we find, that any of these documents refer to or describe the lot of Xirallic® from which Sample C was taken. See Final Dec. 26–27. Regardless of how the Technical Data Sheets were used in the Opposition against the European counterpart of the ’861 patent (Exs. 1040, 1041) and during the prosecution of the application from which the ’861 patent issued (Ex. 1003, 102–104), the Technical Data Sheets do not refer to or describe the lot of Xirallic® from which Sample C was taken. Moreover, as noted by Patent Owner, the Technical Data Sheets (Exs. 1005–1010) indicate that they are “preliminary” and Petitioner has not provided any evidence that the Technical Data Sheets were ever issued to the public, as opposed to just issued internally. See PO Resp. 18–19. We also find persuasive Patent Owner’s argument that the Technical Data Sheets are preliminary because other, later-dated technical data sheets (Exs. 2012, 2013) lack the “preliminary” label and list characteristics that are different from those in Exhibits 1005–1010. See PO Resp. 19 (comparing, e.g., Ex. 1009 and Ex. 2013; Ex. 1005 and Ex. 2012). The Technical Data Sheets may support a finding that the Xirallic® products they describe existed as of the dates on the documents, but they do not support a finding that the lot of Xirallic® from which Sample C was taken was available to the public.” slip op. at 20

  • Expert testimonyPetitioner expert discountedPatent owner expert creditedOther

    “witnesses. See Elbit Systems of Am., LLC v. Thales Visionix, Inc., 881 F.3d 1354, 1358 (Fed. Cir. 2018) (citing Trs. of Columbia Univ. v. Illumina, Inc., 620 F. App’x 916, 922 (Fed. Cir. 2015); Inwood Labs., Inc. v. Ives Labs., Inc., 456 U.S. 844, 856 (1982)). We have reviewed the witness testimony in the record and, more particularly, Mr. Choi’s deposition answers regarding Petitioner’s purchase of the lot of Xirallic® from which Sample C came. We find that Mr. Choi’s responses cast doubt on the credibility of his declaration testimony, namely with regard to the public availability of Sample C. Mr. Choi represented that he was involved in the purchase of the lot of Xirallic® from which Sample C was taken. Ex. 2011, 48:1–23. Mr. Choi stated that he instructed Petitioner’s marketing team manager to buy the sample from a distributor of Patent Owner’s products located in Europe. Id. at 48:24–49:4. Mr. Choi stated that he has evidence of the transaction, but refused to reveal the name of the company from which Petitioner purportedly purchased the lot of Xirallic® (id. at 49:5–50:3) and refused to produce an email in his possession that would corroborate his testimony regarding Petitioner’s acquisition of the product (id. at 50:8–16, 51:10–23). Mr. Choi represented that he does not remember how much Petitioner paid for Sample B. Id. at 56:4–5. Mr. Choi admitted that the entity from which Petitioner acquired the lot of Xirallic® from which Sample C was taken is “not currently a Merck distributor” (Ex. 2011, 50:4–7) and was not “a Merck distributor at the time” that “samples B and C were purchased” (id. at 51:25–52:2). According to Mr. Choi, the company is a “former distributor” of Patent Owner’s products. Id. at 52:3–6. Mr. Choi did not know, according to his testimony, when that unnamed entity first obtained the lot of Xirallic® (id. at 52:7–10) and he stated that he did not have personal knowledge of how the entity obtained the lot of Xirallic® (id. at 52:12–19). Instead, Mr. Choi assumed the entity was “able to obtain the sample through the routine course or process” the entity uses “to take samples or get samples.” Id. at 52:12–19. Mr. Choi believed the sample of Xirallic® from which Sample C was taken was sealed when Petitioner received it because samples from dealers are sealed, and he remembered observing that the package was from a dealer. Id. at 52:24– 54:25. However, Mr. Choi admitted that he did not obtain a technical data sheet or certificate of analysis for the lot of Xirallic® from which Samples B and C were taken. Id. at 59:6–11. Mr. Choi also answered questions regarding Petitioner’s purchase of Samples D and H. Ex. 2011, 62:20–66:8, 67:7–9, 73:12–13, 73:17–22. Similar to his testimony regarding Samples B and C, Mr. Choi admitted withholding an email regarding the purchase of the lot of Xirallic® from which Sample D was taken. Id. at 62:20–63:9. Mr. Choi also admitted that he did not know how Akzo USA or Axalta obtained the Xirallic® the companies sold to him, and admitted that Akzo USA was not a distributor of Patent Owner’s products at the time Petitioner purchased the product. Id. at 63:10–66:8, 73:17–22. Mr. Choi also admitted that Petitioner did not pay Akzo USA for the lot of Xirallic® from which Sample D was taken, and did not pay Axalta for the lot of Xirallic® from which Sample H was taken. Id. at 67:7–9, 73:12–13. Although Petitioner presents declaration testimony from Mr. Choi representing that he purchased the lot of Xirallic® from which Samples B and C were taken in October 2011 (Ex. 1004 ¶ 16), Mr. Choi’s declaration testimony lacks corroborating evidence, and his deposition testimony does not support that the product was available to the public, as we found in our Final Written Decision. See Final Dec. 27–28. Notably, Petitioner produced corroborating evidence for Mr. Choi’s acquisition of Samples A, H, and I. See Ex. 1004 ¶¶ 13 (citing Ex. 1047), 18 (citing Exs. 1024, 1025). However, Mr. Choi withheld similar evidence for the Xirallic® lots from which Samples B, C, and D were taken. See Ex. 2011, 50:8–16, 51:10–23, 62:20– 63:9; Final Dec. 28. As Patent Owner argues, there is “no information to determine when a contract was established, that there was consideration for the exchange, that the product was available to be delivered when the alleged transaction took place, or even when the product was delivered. Choi has no memory of what was paid for the product.” Sur-Reply 24–25; see also PO Resp. 13–14; PO Br. Rem. 2–4.” slip op. at 34

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “Based on the evidence discussed above, we are not persuaded that Petitioner has shown by a preponderance of the evidence that Sample C was available to the public. Regardless of whether a company avoids wasting shelf life of its products (Ex. 1004 ¶¶ 15–16), there is no persuasive evidence in the record showing that the lot of Xirallic® from which Sample C was taken was released from quality control and then made available to the public by Patent Owner. Mr. Choi’s testimony shows that Petitioner obtained the lot of Xirallic® from which Sample C was taken in an atypical manner (i.e., not from Patent Owner or one of Patent Owner’s current distributors) (Ex. 2011, 49:5–50:7, 50:8–16, 51:10–23, 51:25–52:6, 52:12– 19), and there is no evidence in the record to show that the lot of Xirallic® was intended for sale, rather than for experimental use only or for some other restricted use. Accordingly, we determine Petitioner has not demonstrated by a preponderance of the evidence that Sample C qualifies as prior art against the ’861 patent, and we determine that Petitioner has not shown by a preponderance of the evidence that the ’861 patent is unpatentable over the grounds relying on Sample C.” slip op. at 38

  Patent outcomesUS 10,647,861 not shown unpatentable
  § 102 anticipation§ 103 obviousness
  Patents in suitUS 10,647,861
• Solus Advanced Materials Co., Ltd. v. SK Nexilis Co., Ltd.Instituted
  PTAB · Apr 25, 2025 · IPR2024-01463 · APJ David Cotta · IPR · Institution

  The Board instituted inter partes review of claims 1–10 on all asserted grounds, finding a reasonable likelihood of success on at least one claim.

  RulingsInstitution decision

  • PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner

    “predict how the district court in the related district court litigation will proceed because the court may determine whether or not to stay any individual case . . . based on a variety of circumstances and facts beyond our control and to which the Board is not privy.” Sand Revolution II LLC v. Cont’l Intermodal Grp., IPR2019-01393, Paper 24, 7 (PTAB June 16, 2020) (informative). We decline to speculate on how the court may rule on the pending motion to stay. Accordingly, this factor is neutral.” slip op. at 13

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “Under 35 U.S.C. § 314(a), inter partes review may not be instituted unless the Petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Petitioner has established a reasonable likelihood of prevailing on its assertion that at least one of the challenged claims is unpatentable based on the grounds advanced here. We decline to deny the Petition on a discretionary basis as requested by Patent Owner. Thus, for reasons explained below, we institute inter partes review of claims 1–10 of the ’706 patent.” slip op. at 2

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted

    “TC(220), and ΔRz/Ra are result effective variables and that copper foils having ΔPD, TC(220), and ΔRz/Ra values that meet the values recited in claim 1 have advantageous properties. See, e.g., Ex. 1005 ¶ 45 (Kim ’761, disclosing that preferably the “difference in peak count roughness Rpc between the shiny surface . . . and the matte surface . . . of the electrolytic copper foil . . . is preferably 60 or less” because “when the difference in the peak count roughness Rpc exceeds 60 capacity maintenance of the secondary battery is deteriorated.”);15 Ex. 1007, 3:16–23, 4:14–23 (Cheng, disclosing that the foils of Cheng’s invention have (220) and (311) surfaces that provide increased elongation and that solve a high roughness problem that rendered traditional products unsuitable for use in a lithium ion secondary battery), 10:27–34 (Cheng, disclosing that in the foils of Cheng’s invention “the roughness difference between both sides was extremely small” and thus “it was . . . not easy for the electrolytic copper foil to break or fracture during the charging-discharging cycles and the life of a battery is thus increased”), Tables 3 & 4 (Cheng, disclosing embodiments and comparative examples with TC(220) values meeting the requirements of claim 1); Ex. 1008, 6:36–44 (Wolski, disclosing that “the surface roughness Rz at the matte side of the untreated copper foil of the present invention is the same or smaller than the surface roughness Rz at the shiny side . . . so that the surface treated copper foil . . . becomes more low-profiled . . . whereby it becomes a foil having a large etching factor”), 9:1–29 & Table 2 (Wolski, disclosing 15 Dr. Randall testifies that “Kim ’761’s peak count roughness Rpc corresponds to the peak density PD of the ’706 patent.” Ex. 1003 ¶ 52. At this stage in the proceeding, this testimony is unrebutted. 38 embodiments meeting the ΔRz/Ra of claim 1, describing them as having “matte side roughnesses” that are “sufficiently small,” and as having “excellent” “high temperature elongation characteristics”), 11:37–41 (Wolski, describing comparative examples as having “large” matte side roughnesses “whereby etching factors are not good”), 12:12–27 (Wolski, teaching that “as compared with a conventional untreated copper foil, both surfaces of the untreated copper foil obtained by [Wolski’s] invention are flat” resulting in a low profile foil that has “excellent elongations at room temperature and high temperature and also high tensile strength”). The teachings in the prior art support the presently unrebutted testimony of Dr. Randall explaining why the POSA would have been motivated to modify Kim ’761’s copper foil to have the claimed TC(220) and ΔRz/Ra. Ex. 1003 ¶¶ 66–68, 71–74; Pfizer Inc., v. Sanofi Pasteur Inc., 94 F.4th 1341, 1348 (Fed. Cir. 2024) (“Where [a gap in prior art] includes a parameter not necessarily disclosed in the prior art, it is not improper to consider whether or not it would have been recognized as result-effective. If so, then the optimization of that parameter is ‘normally obvious.’”). Accordingly, we are not persuaded by Patent Owner’s argument that Petitioner failed to articulate a sufficient motivation to combine the references. To the contrary, the preliminary record presents a strong showing that the POSA would have been motivated to combine the references in the manner described in the Petition.” slip op. at 38

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “At this stage of the proceeding, Patent Owner does not contest Petitioner’s definition of the level of skill in the art. Prelim. Resp. 4 (“For purposes of this Preliminary Response, Patent Owner applies Petitioner’s level of skill for a person of ordinary skill in the art”). Petitioner’s definition appears to be consistent with the field of the invention reflected in the prior art of record and the disclosure of the ’706 patent. Accordingly, for purposes of this Decision, we adopt Petitioner’s proposed definition of the person of ordinary skill in the art.” slip op. at 21

  Claim construction§ 103 obviousnessDiscretionary denialcites KSR · Graham
  Patents in suitUS 11,591,706
• Solus Advanced Materials Co., Ltd. v. SK Nexilis Co., Ltd.Institution denied
  PTAB · Apr 25, 2025 · IPR2024-01462 · APJ Jo-Anne M Kokoski · IPR · Institution

  The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–8 were unpatentable under the asserted obviousness grounds.

  RulingsInstitution decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “experience working on the development of materials or components for electronic devices such as batteries.” Pet. 2. Petitioner further contends that “[a]dditional education, such as a graduate degree, could compensate for less work experience, and additional work experience could compensate for less formal education.” Id. Patent Owner states that, “[f]or purposes of this Preliminary Response, Patent Owner applies Petitioner’s level of skill for a person of ordinary skill in the art.” Prelim. Resp. 4. For purposes of this Decision, we adopt Petitioner’s undisputed proposed definition because it appears to be consistent with the cited prior art and the disclosure of the ’014 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their plain and ordinary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. Realtime Data LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). in this proceeding.” Pet. 3. Patent Owner contends that “[t]he Board need not construe any term in order to determine that institution should be denied.” Prelim. Resp. 4. Based on the record before us, we determine that no claim term requires express construction for purposes of this Decision. See Realtime Data, 912 F.3d at 1375.” slip op. at 8

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “For these reasons, we are not persuaded that Petitioner sufficiently establishes that a POSITA would have been motivated to modify Hanafusa in light of Dobashi with a reasonable expectation of success as Petitioner contends. Accordingly, we determine that Petitioner fails to demonstrate a reasonable likelihood of prevailing in its assertion that the subject matter of claim 1, and claims 4 and 8 that depend therefrom, would have been obvious over the combined teachings of Hanafusa and Dobashi.” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “Petitioner also focuses on Hanafusa’s teaching that all known methods can be used to make a rough surface low-profile, and Dobashi’s teaching that RSm can be used as an indicator for judgment of the surface, to support its contention that a POSITA would have been motivated to apply Dobashi’s RSm to further achieve Hanafusa’s purpose, without explaining how and why that would be the case. In particular, neither Petitioner nor Dr. Josefowicz adequately explain why a POSITA looking for ways to make Hanafusa’s surface roughness low-profile would look to methods to achieve as the period of waviness, RSm can also be used as an indicator for judgment of the surface.” Ex. 1005, 2:66–3:1, 6:23–26. Dobashi explains that waviness is “an indicator for determining whether the fine pattern forming performance is good or bad,” and “[t]he surface has small waviness and is smooth when RSm is large, and the surface has large waviness and is rough when RSm is small.” Id. at 3:1–3, 6:27–29. Dobashi also teaches that surface roughness Rzjis is used as a low-profile indicator. Ex. 1005, 2:66– 3:1. Dobashi, therefore, teaches that RSm is an indicator of surface waviness, which Dobashi explains is different than surface roughness. Id. at 2:66–3:3, 6:23–29. Given these teachings in Dobashi, neither Petitioner nor Dr. Josefowicz sufficiently explains how or why a POSITA would have been motivated to implement Dobashi’s RSm values to make Hanafusa’s surface roughness low-profile. See Pet. 10–12; Ex. 1003 ¶¶ 46–52.” slip op. at 14

  Claim construction§ 103 obviousnesscites Phillips · KSR
  Patents in suitUS 11,346,014
• Solus Advanced Materials Co, Ltd. v. SK Nexilis Co., Ltd.Institution denied
  PTAB · Apr 22, 2025 · IPR2024-01460 · APJ Jon B Tornquist · IPR · Institution

  The Board denied institution of review of claims 1–11 because the Fintiv factors, including the early trial date and close merits case, favored discretionary denial.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied fintivInstitution denied

    “whether to institute an inter partes review. Applying the standard set forth in 35 U.S.C. § 314(a), we may not institute an inter partes review unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Institution of inter partes review, however, is discretionary. See Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1367 (Fed. Cir. 2016) (“[T]he PTO is permitted, but never compelled, to institute an IPR proceeding.”). For the reasons stated below, we exercise our discretion not to institute an inter partes review. A. Real Parties-in-Interest” slip op. at 2

  • PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Institution denied fintivDenied

    “Board’s projected statutory deadline to issue a final written decision. Fintiv, Paper 11 at 9. “If the court’s trial date is at or around the same time as the projected statutory deadline . . . the decision whether to institute will likely implicate other factors.” Id. Conversely, “[i]f the court’s trial date is earlier than the projected statutory deadline,” this has generally weighed “in favor of exercising authority to deny institution.” Id.” slip op. at 15

  • PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsNot reached

    “Petition under 35 U.S.C. § 325(d) because the same or substantially the same art and arguments were before the Examiner during prosecution and Petitioner’s has not demonstrated that the Examiner erred in a material manner when allowing the claims. Pet. 17–18. Given our discretionary denial of the Petition in view of the Fintiv factors, we do not address Petitioner’s further arguments with respect to § 325(d).” slip op. at 32

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner applies Petitioner’s recited level of ordinary skill in the art for purposes of its Preliminary Response. Prelim. Resp. 4. Upon review of the parties’ arguments and the prior art of record, we adopt Petitioner’s unopposed definition of the ordinarily skilled artisan for purposes of this decision as it appears consistent with the disclosures of the ’090 patent and the prior art of record. C. Claim Construction” slip op. at 9

  § 103 obviousnessDiscretionary denialcites Phillips · KSR · Graham
  Patents in suitUS 10,480,090
• Apple Inc. v. Haptic, Inc.Institution denied
  PTAB · Apr 4, 2025 · IPR2024-01476 · APJ Andreas Baltatzis · IPR · Institution

  The Board denied institution of review of claims 3, 6, 7, 12, and 13, exercising § 314(a) discretion under Fintiv after balancing the parallel litigation factors.

  RulingsInstitution decision

  • PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied

    “prejudice to renewal if the PTAB institutes IPR review.” Ex. 2023, 6. A stay denial without prejudice to renew if a PTAB trial is instituted “usually weigh[s] against exercising authority to deny institution.” Fintiv, Paper 11 at 7. But “proximity of the court’s trial date and investment of time are relevant to how much weight to give to the court’s willingness to reconsider a stay.” Id. Although the District Court denied a stay pending the Board’s decision, the court also identified the proximity of the trial date and litigation investment as significant factors in its initial denial of the requested stay. See Ex. 2023, 6. Thus the evidence is inconclusive as to whether or not the District Court would stay the case if we granted institution at this time. Absent a clear indication from the District Court, we decline to predict whether a stay would be granted.” slip op. at 9

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away foundOther

    “a sensor in a fixed position relative to a sensing surface to provide a fixed reference point for accurate detection of vibratory signals”), 171 (“the sensor is held in a particular position within the housing and relative to the surface that the housing is mounted to”). Stewart teaches the opposite: a sensor that is vibrated inside a housing to measure rotational movement. Ex. 1006, 5:54–56, 6:5–10, 6:20–31; Ex. 2001 ¶¶ 100, 133, 138. Thus, Stewart’s sensor is flexibly suspended with brackets inside the housing to allow movement and minimize transmission of vibrations from the surface to the sensor. Ex. 1006, 5:7–24, 7:61–64; Ex. 2001 ¶ 102. Petitioner combines Murakoshi with Stewart’s brackets and case mounts to fix the sensor to prevent it from moving within the housing and thus enable the sensor to detect vibrations from outside the housing. See Pet. 24, 33–36. But Stewart’s teachings undermine the very reason proffered by Petitioner, because Stewart’s sensor is movably suspended within the housing so that it does not detect vibrations from outside the housing. See DePuy Spine, Inc. v. Medtronic Sofamor Danek, Inc., 567 F.3d 1314, 1326 (Fed. Cir. 2009) (“An inference of nonobviousness is especially strong where the prior art’s teachings undermine the very reason being proffered as to why a person of ordinary skill would have combined the known elements.”).” slip op. at 14

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successReasonable expectation not foundOther

    “Likewise, we find a significant weakness in Petitioner’s argument for a reasonable expectation of success in the combination. “The reasonable expectation of success requirement refers to the likelihood of success in combining references to meet the limitations of the claimed invention.” Intelligent Bio-Sys., Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1367 (Fed. Cir. 2016). Claim 1 requires “said sensor being in a fixed position portion” that “set[s] a rigid position of said sensor relative to said mounting surface” (limitation 1e). As discussed above, neither Murakoshi nor Stewart appear to teach a sensor in a fixed position relative to said engagement means or a rigid position relative to said mounting portion. Accordingly, even if Murakoshi’s and Stewart’s teachings were to be combined, the combined teachings would not appear to meet the limitations of the claimed invention.” slip op. at 14

  § 103 obviousnessDiscretionary denial
  Patents in suitUS 9,996,738
• Innoscience (Zhuhai) Technology Company, Ltd. / Innoscience America, Inc. v. Efficient Power Conversion CorporationNo claims unpatentable
  PTAB · Mar 25, 2025 · IPR2023-01382 · APJ Kimberly Mcgraw · IPR · Final written decision

  Claims 1–3 were not shown unpatentable under any of five § 103 grounds because Petitioner failed to establish sufficient motivation to modify or combine the prior art.

  RulingsFinal written decision

  • BurdenNot shown unpatentable

    “A petition must identify “with particularity . . . the evidence that supports the grounds for the challenge to each claim.” 35 U.S.C. § 312(a)(3) Here, Petitioner merely provides general assertions about multiple references, without clearly identifying how, or why a POSITA would have been motivated, to modify the processes disclosed in those references to arrive at the claimed invention. Thus, the Petition does not state with particularity that Saxler’s particular technique for etching is to be used instead of Beach’s etching step when substituting Beach’s self-aligned process for Saxler’s two mask process. Nor does the Petitioner provide a sufficient reason, absent hindsight, why a POSITA would have been motivated to combine the references to result in a process that forms Saxler’s Modified Figure 1A. Thus, for these additional reasons, Petitioner has not shown by a preponderance of the evidence that claim 1 would have been obvious over Saxler, Beach, and Shenoy.” slip op. at 34

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Both parties agree that the differences between the definitions do not impact the analysis. Resp. 11; Reply 2. In light of the record before us, and for purposes of this Decision, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’347 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand and implement the teachings of the ’347 patent and the prior art. We also note that our Decision would be the same under either parties’ definition.” slip op. at 13

  • Expert testimonyOther

    “Petitioner’s expert, Dr. Shealy states that he understands paragraph 52 to mean that it is “fair game to pull the recess out of any of those figures [Figures 1A through 6].” Ex. 2004, 39:12–21. Dr. Shealy, however, also clarifies that “[a]s I said before, I think you could take all the embodiments and bring in which ones you want, depending on what you’re trying to accomplish.” Ex. 2004, 40:24–41:1. During the hearing, Petitioner admitted that Dr. Shealy’s “statement to modify the reference depending on what you're trying to accomplish” means that “a POSITA may modify with reason to do so. A POSITA would have removed Saxler’s recess to obtain the benefits of enhancement-mode.” Tr. 19:19–25. Again, the Petition does not provide a reason why a POSITA would have removed Saxler’s gate recess.” slip op. at 28

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “remove the recess in Saxler Figure 1A to arrive at the allegedly enhancement mode transistor of Modified Figure 1A. Contrary to Petitioner’s assertions in its Reply and at the hearing, the Petition makes no argument that a POSITA would have removed the recess from Saxler Figure 1A to realize the benefits of an enhancement mode transistor. See Reply 4–5; Pet. 24–68. Rather, the Petition merely asserts that a POSITA would have understood that the gate recess of Figure 1A is optional without providing any persuasive reason why a POSITA would have removed the gate recess but retained the sloped sidewalls of Figure 1A. Pet. 25, 40, 45. For example, Petitioner asserts that Saxler’s gate contact may be “recessed or non-recessed” and that when the gate recess shown in Figure 1A is not utilized, Saxler would have the structure of Saxler Modified Figure 1A. Pet. 25 (citing Ex. 1003 ¶ 81; Ex. 1007 ¶ 52, 66); see also Pet. 40, 45 (citing Ex. 1007 ¶ 52). Neither of these paragraphs provide sufficient motivation to a POSITA to remove the gate recess from Saxler Figure 1A. Saxler paragraph 52 states: Exemplary devices according to some embodiments of the present invention are schematically illustrated in FIGS. 1A through 6. Thus, while embodiments of the present invention are described herein with reference to a recessed gate structure or a non-recessed gate structure, other embodiments of the present invention may include or not include a gate recess. Accordingly, embodiments of the present invention should not be construed as limited to the particular exemplary embodiments described herein but may include any suitable structure having a cap layer and/or passivation layer as described herein. Ex. 1007 ¶ 52. Petitioner’s expert, Dr. Shealy states that he understands paragraph 52 to mean that it is “fair game to pull the recess out of any of those figures [Figures 1A through 6].” Ex. 2004, 39:12–21. Dr. Shealy, however, also clarifies that “[a]s I said before, I think you could take all the embodiments and bring in which ones you want, depending on what you’re trying to accomplish.” Ex. 2004, 40:24–41:1. During the hearing, Petitioner admitted that Dr. Shealy’s “statement to modify the reference depending on what you're trying to accomplish” means that “a POSITA may modify with reason to do so. A POSITA would have removed Saxler’s recess to obtain the benefits of enhancement-mode.” Tr. 19:19–25. Again, the Petition does not provide a reason why a POSITA would have removed Saxler’s gate recess.” slip op. at 28

  Patent outcomesUS 9,748,347 not shown unpatentable
  § 103 obviousnesscites Phillips · KSR
  Patents in suitUS 9,748,347
• Innoscience (Zhuhai) Technology Company, Ltd. / Innoscience America, Inc. v. Efficient Power Conversion CorporationAll claims unpatentable
  PTAB · Mar 25, 2025 · IPR2023-01384 · APJ Jeffrey W Abraham · IPR · Final written decision

  Claims 1–7 are unpatentable as obvious over Yoshida and Saxler; the Board did not reach the alternative grounds.

  RulingsFinal written decision

  • Skill levelOther

    “In light of the record before us, we determine that we do not need to reach a specific finding regarding the level of ordinary skill in the art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown”) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)).” slip op. at 13

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner

    “In the Institution Decision, we declined to adopt Petitioner’s proposed construction of the “side surfaces” limitation and determined that it was not necessary to further construe this term because “[t]he parties do not dispute that the language ‘side surfaces extending horizontally’ encompasses a gate material with sloped side surfaces as depicted in Figure 5 of the ’335 patent.” Inst. Dec. 11–16 (citing Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017); Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)). We invited the parties to address this limitation further during the course of this trial, but neither party provided additional evidence or argument regarding the “side surfaces” limitation. Inst. Dec. 16; see generally PO Resp.; Reply; Sur-reply. Accordingly, we maintain our determination from the Institution Decision that we do not need to construe the “side surfaces” limitation. Inst. Dec. 15– 16.” slip op. at 14

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “This evidence, particularly the language in the ’335 patent itself, undermines Patent Owner’s argument that “[t]he process for forming gate ledges using separate masks instead of the self-aligned process disclosed in the ’335 patent cannot produce ledges that are ‘substantially symmetric.’” PO Resp. 39 (emphasis added); see also PO Resp. 42–43 (arguing that a gate structure with ledges having substantially equal widths is “not achievable” without using a single photo-mask process). We have considered the evidence presented by Patent Owner and Dr. Schubert in support of Patent Owner’s arguments. PO Resp. 38–43; Ex. 2005 ¶¶ 49–51. We, however, are unable to discern sufficient evidence supporting a conclusion that using separate masks cannot produce ledges that are substantially symmetric, particularly when the ’335 patent suggests otherwise. See Ex. 1001, 4:60– 63 (referring only to the “possibility of misalignment”). Even if, as Patent Owner and Dr. Schubert contend, misalignment “naturally” occurs when using a two-mask process, that does not foreclose the possibility that the” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner

    “It is well settled that “[a] reference does not teach away . . . if it merely expresses a general preference for an alternative invention but does not ‘criticize, discredit or otherwise discourage’ investigation into the invention claimed.” DePuy Spine, Inc. v. Medtronic Sofamor Danek, Inc., 567 F.3d 1314, 1327 (Fed. Cir. 2009) (quoting In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004)). Furthermore, “teaching that a composition may be optimal or standard does not criticize, discredit, or otherwise discourage” slip op. at 31

  Patent outcomesUS 10,312,335 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,312,335

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.