- Shenzhen Waydoo Intelligence Technology Co., Ltd. v. MHL Custom, Inc.Institution deniedPTAB · Dec 17, 2024 · IPR2024-00999 · APJ Michael L Woods · IPR · Institution
The Board denied joinder and denied institution on all challenged claims and grounds because the petition was time-barred under § 315(b).
RulingsInstitution decision- PTAB / AIA Trials › §315(b) time barInstitution denied time barDenied
“Whether we institute review depends on whether we grant Petitioner’s Motion for Joinder. If granted, the one-year bar does not apply. See 35 U.S.C. § 315(b). If denied, the Petition is time-barred. See id.” slip op. at 6
- PTAB / AIA Trials › Joinder §315(c) / SAS all-or-nothingJoinder, deniedDenied
“As in Code200 I, Petitioner provides no explanation as to why it did not file a petition seeking inter partes review of the ’659 patent within the one-year window. See generally Mot.; see also Opp. 2 (“Petitioner offers no explanation for why it waited over three years to seek to challenge the patent through IPR proceedings.”). Furthermore, Petitioner provides no explanation as to why joinder would be fair or otherwise in the interests of justice. See generally Mot.; see also Opp. 2 (“Petitioner offers no explanation for how joinder would be fair to, and not otherwise prejudice, Patent Owner.”). Accordingly, Petitioner has failed to establish that it is entitled to the requested relief under our Rules. See 37 C.F.R. §§ 42.1, 42.20(c). For the forgoing reasons, we exercise our discretion to deny Petitioner’s Motion for Joinder.” slip op. at 13
Discretionary denialPatents in suitUS 9,586,659 - Shenzhen Waydoo Intelligence Technology Co., Ltd. v. MHL Custom, Inc.Institution deniedPTAB · Dec 17, 2024 · IPR2024-00998 · APJ Michael L Woods · IPR · Institution
The Board denied joinder and denied institution on all challenged claims because the petition was time-barred under § 315(b).
RulingsInstitution decision- PTAB / AIA Trials › Joinder §315(c) / SAS all-or-nothingJoinder, deniedDenied
“establish that it is entitled to the requested relief.” See 37 C.F.R. § 42.20(c). Regarding joinder, the relevant statute provides that: If the Director institutes an inter partes review, the Director, in his or her discretion, may join as a party to that inter partes review any person who properly files a petition under section 311 that the Director, after receiving a preliminary response under section 313 or the expiration of the time for filing such a response, determines warrants the institution of an inter partes review under section 314. 35 U.S.C. § 315(c).” slip op. at 5
- PTAB / AIA Trials › §315(b) time barInstitution denied time barInstitution denied
“This statute further provides that the petition for inter partes review must be filed no later than “1 year after the date on which the petitioner, real party in interest, or privy of the petitioner is served with a complaint alleging infringement of the patent.” 35 U.S.C. § 315(b); see also 37 C.F.R. § 42.101(b). This one-year time bar, however, “shall not apply to a request for joinder.” 35 U.S.C. § 315(b); see also 37 C.F.R. § 42.122(b).” slip op. at 5
Discretionary denialPatents in suitUS 9,359,044 - Boe Technology Group Co., Ltd. v. 138 East LCD Advancements LimitedInstitution deniedPTAB · Dec 16, 2024 · IPR2024-00976 · APJ Grace Karaffa Obermann · IPR · Institution
The Board denied institution because BOE did not show a reasonable likelihood of prevailing on claims 1–3 under any of its three obviousness grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsDenied
“We have authority to institute an inter partes review where a petitioner shows a reasonable likelihood of prevailing with respect to at least one challenged claim. 35 U.S.C. § 314(a); 37 C.F.R. § 42.4(a). For reasons that follow, Petitioner does not meet that evidentiary threshold. We decline to reach the issues raised in the Reply or Sur-reply, which relate to Patent Owner’s alternative argument that a discretionary denial of the Petition is warranted.” slip op. at 2
- Skill levelSkill level petitioner adoptedOther
“education could substitute for professional experience and vice versa.” Pet. 26. Patent Owner “does not dispute the level of skill for a person of ordinary skill in the art” as “set forth in the Petition.” Prelim. Resp. 11. For purposes of this Decision, we adopt Petitioner’s unopposed definition (Pet. 26) because, on this record, it is consistent with the specification. We take note that neither party indicated that the result would change under any different definition.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We construe terms in controversy only to the extent necessary to resolve the controversy. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Petitioner discusses the terms a “data line having a broad-width portion” and a “scanning line having a broad-width portion” recited in claim 1, as well as a “data line having a broad portion” and a “scanning line having a broad-width portion” recited in claim 2. Petitioner cites the ’079 patent for “offering a lexicographic definition of the term ‘broad width’” to support the plain meaning interpretation of the terms “‘broad-width portion’ and ‘broad portion’ as a portion that is broader than another portion of the subject element.” Pet. 16. Patent Owner does not provide arguments directed specifically to Petitioner’s proposed claim constructions. See Prelim. Resp. 10–11. Taking account of the information presented, we determine that no claim term requires express construction for purposes of deciding whether to institute review. Compare Pet. 16 (addressing issues of claim construction, citing the ’079 patent for supporting the plain and ordinary meaning of “broad-width portion” and “broad portion” without demonstrating that an express construction is necessary to resolve whether to institute review), with Prelim. Resp. 10–11 (addressing the merits of Petitioner’s challenges, without asserting an express claim construction). To the extent that the scope of any claim term requires discussion, however, we provide it in the following analysis of the challenges.” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“Id. (emphasis added). Sato ¶ 26 is entirely silent on scan lines and clearly links the cited benefits to “this arrangement” of “data lines composed of an Al film.” Id. Importantly, Petitioner does not connect Sato’s disclosure, relating to benefits associated with a data line arrangement, to any particular arrangement of scan lines. Sato ¶ 28 is equally deficient. Sato ¶ 28 also discusses benefits of utilizing a specific “arrangement,” namely, “capacitance lines formed of [a] metal film.” Id. ¶ 28. [0028] With this arrangement, the provision of the function as the shading layer with the capacitance lines formed of the metal film, the polysilicon film, or the like, in addition to the function as the wiring, as well as the provision of the function as the light absorption layer with the capacitance electrodes formed of the polysilicon film, or the like, in addition to the function as electrodes, prevents the laminated structure from becoming complex by additionally forming a dedicated shading layer and a dedicated light absorption layer. Accordingly, this arrangement is very advantageous by simply arranging the electro-optical device, and simplifies a manufacturing process thereof. Id. (emphasis added). Here again, Sato ¶ 28 is entirely silent on scan lines and clearly links the cited benefits to “this arrangement” of “capacitance lines formed of metal film.” Id. Petitioner does not bridge the gap in its rationale to combine by attempting to explain why an ordinarily skilled artisan would have extrapolated benefits, pertaining to an arrangement of capacitance lines, to a similar arrangement of scan lines. Petitioner’s witness, Dr. Flasck, provides no further insight as to how or why Sato ¶¶ 26 and 28 would have been understood to apply to scan lines. Dr. Flasck’s comments on Sato ¶¶ 26 and 28 merely repeat, nearly verbatim, the Petition’s conclusory contentions. See Ex. 1002 ¶ 139 (Dr. Flasck declaring “Sato specifically teaches that its device ‘is very advantageous by simply arranging the electro-optical device, and simplifies a manufacturing process thereof.’”); Pet. 37. Dr. Flasck does not cite to any additional supporting evidence other than Sato ¶¶ 26 and 28. Ex. 1002 ¶ 139.” slip op. at 15
Claim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 7,502,079 - Boe Technology Group Co., Ltd. v. 138 East LCD Advancements LimitedInstitution deniedPTAB · Dec 16, 2024 · IPR2024-00977 · APJ Christopher M Kaiser · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood of proving claims 7–13 and 15–20 unpatentable on any asserted ground.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“determine whether to institute an inter partes review under 35 U.S.C. § 314 and 37 C.F.R. § 42.4(a). Inter partes review may not be instituted unless “the information presented in the petition filed under [35 U.S.C.] section 311 and any response filed under [35 U.S.C.] section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). “When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.” 37 C.F.R. § 42.108(a) (2023).” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“had at least a Bachelor’s degree in electrical engineering, computer science, physics, or a similar field and at least two years of experience designing semiconductor display devices, including LCD displays.” Pet. 19. Petitioner also asserts that “[a]dditional relevant work experience can compensate for less education, and vice versa.” Id. On the record presented, Patent Owner “does not dispute the level of skill for a person of ordinary skill in the art . . . set forth in the Petition.” Prelim. Resp. 8. Neither party explains why the outcome of this case would be affected by the adoption of any particular proffered definition of a person of ordinary skill in the art. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’606 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“As discussed below, we are able to determine whether to institute review without resolving the construction of any claim terms. Accordingly, we need not and do not construe any terms expressly. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 8
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“view. First, as Petitioner admits, data line 6a is not connected to image signal line 101d and line 109 other than when sample hold circuit 101c connects them due to shift register 101b outputting an enabling signal. Pet. 49. This is supported by the layout of the four elements in Fujikawa’s Figure 2. Ex. 1005, Fig. 2 (depicting sample hold circuits 101c between and connecting data lines 6a and signal lines 101d). In addition, Patent Owner’s declarant, Dr. E. Fred Schubert, testifies that “two separate lines straddling circuitry are [not] one line.” Ex. 2001 ¶ 64. The dispute between the parties on this issue is largely one of claim construction: should the term “wiring line” in claim 7 be construed broadly enough to encompass a collection of lines separated by a sample hold circuit? In order to determine that Fujikawa discloses or teaches the recited wiring lines, we would need to answer this question in the affirmative. Yet, as discussed above, neither party proposes construing “wiring line,” or any other term used in the claims of the ’606 patent. Pet. 18; Prelim. Resp. 7. The failure to argue for and sufficiently support a broad construction of the term “wiring line” means that Petitioner does not show sufficiently, for purposes of supporting institution of review, that Fujikawa discloses or teaches the “wiring line” limitation of claim 7. b) Conclusion Regarding Claim 7 Based on the record presented, we determine that Petitioner has not shown that there is a reasonable likelihood that Petitioner will prevail in demonstrating that claim 7 is unpatentable as anticipated by or obvious in view of Fujikawa.” slip op. at 11
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,557,606 - PTAB · Dec 16, 2024 · IPR2024-00973 · APJ George R Hoskins · IPR · Institution
The Board instituted IPR of claims 1–18 on all asserted grounds, finding a reasonable likelihood that BOE would prevail on claim 4 over Reiner.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner
“We secondly conclude Petitioner’s stipulation is commensurate in scope with a Sotera stipulation. See Sotera, Paper 12, at 13–14, 18–19; Guidance Memo, at 3. The Guidance Memo states: Consistent with Sotera Wireless, Inc., the PTAB will not discretionarily deny institution in view of parallel district court litigation where a petitioner presents a stipulation not to pursue in a parallel proceeding the same grounds or any grounds that could have reasonably been raised before the PTAB. Guidance Memo, 3, 7–8. Thus, applying that guidance here, we do not deny institution in view of the Co-Pending Litigation.” slip op. at 9
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“We conclude the preliminary record supports, sufficiently to justify institution, Petitioner’s contention that a person of ordinary skill in the art would have been motivated to configure Reiner’s gate/scanning driver 63 to include the ESD protection network structure illustrated in Figure 5. First, we agree with Petitioner’s position that Reiner discloses both of its display drivers 61 and 63 would benefit from ESD protection. That is, Reiner describes display drivers 61 and 63 as “typical example[s]” of integrated circuit devices that can benefit from utilizing Reiner’s bump bridge technology for providing ESD protection, due to the large number of parallel output lines that must cross power supply lines. See Ex. 1005, 4:15–16, 9:11–20 (describing Fig. 4), 12:4–5. Thus, based on this preliminary record, we disagree with Patent Owner’s position that Petitioner mischaracterizes Reiner’s teachings in this regard. Second, based on the preliminary record, Dr. Murphy’s testimony that the ESD protection network structure of Reiner’s Figure 5 would be suitable for implementing in Reiner’s gate/scanning driver 63 due to similarities between the two drivers is supported by the evidence sufficiently to justify institution. See Ex. 1003 ¶¶ 104–105, 111–120. A first similarity is Reiner’s indication that both display drivers 61 and 63 “have areas where the output or input metal lines have to cross power supply lines” Vdd and Vss. Ex. 1005, 9:11–20, 12:4–5, Fig. 3 (illustrating exemplary integrated circuit device 30 powered by supply voltages Vdd and Vss). A second similarity is Dr. Murphy’s testimony that, at least in some embodiments of Reiner’s gate/scanning driver 63, “each of the [scan] lines being driven will have its own semiconductor units . . . [that] drive that particular line,” akin to the individual output devices 70 and source lines 67 of Figure 5. Ex. 1003 ¶¶ 113, 117; see also Prelim. Resp. 21–22 (arguing “Reiner [discloses] that the gate driver integrated circuit comprises individual gate drivers” and “a POSITA would understand that individual gate/scan line drivers are coupled to one another”). These similarities between Reiner’s display drivers 61 and 63 support Dr. Murphy’s conclusion that Reiner’s bump bridge technology for providing ESD protection could and would have been implemented in Reiner’s gate/scanning driver 63 in the same fashion as illustrated in Figure 5 for Reiner’s source/data driver module 61. We appreciate, as Dr. Schubert testifies, that the individual circuits in gate/scanning driver 63 will drive their respective gate/scan lines 68 in different ways than the individual output devices 70 in source/data driver module 61 will drive their respective source/data lines 67. See Ex. 2001 ¶¶ 55–59. Nonetheless, based on the present record, we conclude such differences in the signal outputs of Reiner’s display drivers 61 and 63 have little to do with the benefits of configuring the power inputs of the display drivers to protect the individual circuits from electrostatic discharge events, or how to do so.” slip op. at 35
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“We conclude the preliminary record supports, sufficiently to justify institution, Petitioner’s contention that a person of ordinary skill in the art would have been motivated to configure Reiner’s gate/scanning driver 63 to include the ESD protection network structure illustrated in Figure 5. First, we agree with Petitioner’s position that Reiner discloses both of its display drivers 61 and 63 would benefit from ESD protection. That is, Reiner describes display drivers 61 and 63 as “typical example[s]” of integrated circuit devices that can benefit from utilizing Reiner’s bump bridge technology for providing ESD protection, due to the large number of parallel output lines that must cross power supply lines. See Ex. 1005, 4:15–16, 9:11–20 (describing Fig. 4), 12:4–5. Thus, based on this preliminary record, we disagree with Patent Owner’s position that Petitioner mischaracterizes Reiner’s teachings in this regard. Second, based on the preliminary record, Dr. Murphy’s testimony that the ESD protection network structure of Reiner’s Figure 5 would be suitable for implementing in Reiner’s gate/scanning driver 63 due to similarities between the two drivers is supported by the evidence sufficiently to justify institution. See Ex. 1003 ¶¶ 104–105, 111–120. A first similarity is Reiner’s indication that both display drivers 61 and 63 “have areas where the output or input metal lines have to cross power supply lines” Vdd and Vss. Ex. 1005, 9:11–20, 12:4–5, Fig. 3 (illustrating exemplary integrated circuit device 30 powered by supply voltages Vdd and Vss). A second similarity is Dr. Murphy’s testimony that, at least in some embodiments of Reiner’s gate/scanning driver 63, “each of the [scan] lines being driven will have its own semiconductor units . . . [that] drive that particular line,” akin to the individual output devices 70 and source lines 67 of Figure 5. Ex. 1003 ¶¶ 113, 117; see also Prelim. Resp. 21–22 (arguing “Reiner [discloses] that the gate driver integrated circuit comprises individual gate drivers” and “a POSITA would understand that individual gate/scan line drivers are coupled to one another”). These similarities between Reiner’s display drivers 61 and 63 support Dr. Murphy’s conclusion that Reiner’s bump bridge technology for providing ESD protection could and would have been implemented in Reiner’s gate/scanning driver 63 in the same fashion as illustrated in Figure 5 for Reiner’s source/data driver module 61. We appreciate, as Dr. Schubert testifies, that the individual circuits in gate/scanning driver 63 will drive their respective gate/scan lines 68 in different ways than the individual output devices 70 in source/data driver module 61 will drive their respective source/data lines 67. See Ex. 2001 ¶¶ 55–59. Nonetheless, based on the present record, we conclude such differences in the signal outputs of Reiner’s display drivers 61 and 63 have little to do with the benefits of configuring the power inputs of the display drivers to protect the individual circuits from electrostatic discharge events, or how to do so.” slip op. at 35
- Skill levelSkill level petitioner adoptedDecided for petitioner
“to the ’157 patent “would have had at least a Bachelor’s degree in electrical engineering, computer science, physics, or a similar field and at least two years of experience designing semiconductor display devices, including LCD displays,” and “[a]dditional relevant work experience can compensate for less education, and vice versa.” Pet. 15–16; Ex. 1003 ¶¶ 75–76. “Patent Owner does not dispute the level of skill for a person of ordinary skill in the art . . . set forth in the Petition.” Prelim. Resp. 14; Ex. 2001 ¶¶ 19–20. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears to be consistent with the ’157 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 10
Claim construction§ 103 obviousnessDiscretionary denialcites KSR · GrahamPatents in suitUS 9,184,157 - Innoscience America, Inc. v. Infineon Technologies Austria AGInstitution deniedPTAB · Dec 11, 2024 · IPR2024-00975 · APJ Christopher M Kaiser · IPR · Institution
The Board denied institution because the petition did not show a reasonable likelihood that any challenged claim was obvious over the asserted grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“determine whether to institute an inter partes review under 35 U.S.C. § 314 and 37 C.F.R. § 42.4(a). Inter partes review may not be instituted unless “the information presented in the petition filed under [35 U.S.C.] section 311 and any response filed under [35 U.S.C.] section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). “When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.” 37 C.F.R. § 42.108(a) (2023).” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“possessed at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design.” Pet. 1. Petitioner also asserts that “[a]dditional education could substitute for professional experience and vice versa.” Id. On the present record, Patent Owner does not dispute this proposed level of skill. Prelim. Resp. 1–78. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’481 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“On the present record, neither party proposes any claim terms for construction. Pet. 3; Prelim. Resp. 1–78. As discussed below, we are able to determine whether to institute review without resolving the construction of any claim terms. Accordingly, we need not and do not construe any terms expressly. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 8
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“‘run[ning] generally parallel to the lateral extent of a semiconductor material or semiconductor carrier’” and that “[t]he ’481 patent . . . describes a device that ‘has a lateral drift path.’” Pet. 24 (quoting Ex. 1001, 3:14–18, 4:37–38). Patent Owner directs us to a statement in the prosecution history that “[a] lateral transistor is a transistor in which current flows across ‘in the direction parallel to’ the device surface,” as opposed to “a vertical transistor,” in which “[c]urrent ‘flows in the direction normal to’ the device surface.” Prelim. Resp. 8 (quoting Ex. 1002, 33–34). Thus, the parties generally agree that a lateral transistor is a transistor in which current flows in a direction parallel to the surface of the transistor. Petitioner argues that Nega teaches or suggests a transistor in which current flows parallel to the surface because Nega’s source, gate, and drain electrodes “are spread laterally in a lateral drift path, instead of vertically stacked.” Pet. 24–25 (citing Ex. 1005, Fig. 2). Patent Owner argues to the contrary that the placement of source, gate, and drain electrodes in the same lateral plane, rather than in a vertical stack, does not necessarily indicate that the current flow within the transistor is parallel to the surface. Prelim. Resp. 47–48 (citing Ex. 2002, 7–8, Figs. 1.7a, 1.7c). According to Patent Owner, transistors with electrodes in the same horizontal plane can have either lateral or vertical current flow. Id. Thus, Patent Owner argues, the lateral placement of the source, gate, and drain electrodes in Nega does not mean that Nega teaches or suggests a lateral transistor. On the present record, we agree with Patent Owner that Petitioner has not shown sufficiently that Nega teaches a transistor in which current flows in a direction parallel to the surface, rather than in a direction normal to the surface. Transistors with current flow in either direction can have electrodes located on a common horizontal plane, with the direction of the current flow depending on the configuration of doped semiconductor regions located below the electrodes. Ex. 2002, Figs. 1.7a, 1.7c. Because Petitioner relies on the location of Nega’s electrodes, rather than on any particular configuration of doped semiconductor regions in Nega, Petitioner does not show sufficiently that Nega teaches a lateral transistor.” slip op. at 10
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,899,481 - Commscope Technologies LLC v. Belden, Inc.No claims unpatentablePTAB · Dec 11, 2024 · IPR2023-01056 · APJ Kimberly Mcgraw · IPR · Final written decision
CommScope did not prove claims 1–3, 9–14, and 16–18 unpatentable; the asserted anticipation and obviousness grounds failed on the barrier tape’s conductive material extending to the lateral edges.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedOther
“would have had a bachelor’s degree in electrical engineering and a minimum of 3-4 years of industry experience in connection with designing, manufacturing, and testing of twisted-pair data cables,” and an “individual with a master’s degree in electrical engineering would require less industry experience (e.g., 1-2 years).” Pet. 15 (citing Ex. 1006 ¶ 12). Prior to institution, Patent Owner’s declarant asserted that a POSITA would have had at least a bachelor’s degree in electrical engineering and a minimum of 3-4 years of industry experience in the telecommunications industry and disagreed that industry experience specifically with respect to twisted-pair data cables was necessary to qualify as having ordinary skill in the art. Ex. 2001 ¶ 26 (cited at Prelim. Resp. 22 n.6). Patent Owner stated, however, that any differences between the parties’ proposed definitions “are insubstantial and do not impact the analysis of the issues presented.” Prelim. Resp. 22 n.6. In our Decision on Institution, we adopted Petitioner’s proposal of a person of ordinary skill in the art (POSITA) as someone that “would have had a bachelor’s degree in electrical engineering and a minimum of 3-4 years of industry experience in connection with designing, manufacturing, and testing of twisted-pair data cables,” and an “individual with a master’s degree in electrical engineering would require less industry experience (e.g., 1-2 years).” Inst. Dec. 7–8. During the trial, neither party disputed our definition of a POSITA nor argued that the outcome of this case would differ based upon our adoption of any particular definition of a POSITA. See generally Reply; PO Resp. 12 n.4 (agreeing the POSITA definition does not impact analysis of issues presented). Upon review of the full record, we see no reason to modify, and we thus maintain, the definition of a POSITA applied in our Decision on Institution.” slip op. at 10
- Expert testimonyDecided for patent owner
“Petitioner’s arguments are not persuasive. Mr. Cornelison’s testimony that a POSITA would understand that the tape shown in Figure 13C “has three layers aligned along the side edges” is not credible. See, e.g., Ex. 1006 ¶ 138. Mr. Cornelison’s testimony that Figure 13C is only “intended to identify and illustrate the three different layers of the multi-layer tape,” not to show the relative positions of the layers relative to each other (id. ¶ 137), is belied by his own testimony, in which he states that Figure 13C shows “metallic layer 133 extends to the front edges of dielectric layers 135 and 137 (id. ¶ 136). Additionally, neither Petitioner nor Mr. Cornelison provide persuasive evidence to support the contention that it would take “much more time and be more complex to make all three layers” in Figure 13C offset from each other or that it would be more costly to make than using the customary slitting processes. See Ex. 1006 ¶ 138. Although Mr. Cornelison provides evidence as to how the slitting process can be used to manufacture barrier tape, he does not provide any evidence to support his contention that the proposed slitting processes is in fact less expensive or complex than other methods. See Ex. 1006 ¶ 138. Indeed, Mr. Cornelison does not address the particular methods disclosed in Glew to manufacture the disclosed multi-layer tapes nor persuasively explain why these disclosed methods would be more costly or complex as compared to the “slitting” process. Ex. 1008 ¶¶ 199–201 (stating the multi-layer tapes can be manufactured in a “variety of ways” including bonding the various layers using adhesive or other bonding agents,” mechanically affixing or bonding the layers, needlepunching, thermal bonding, ultrasonic welding, or calendar bonding). We determine that this portion of Mr. Cornelison’s testimony is conclusory and unsupported and is entitled to little weight. Accordingly, Petitioner has not sufficiently shown that Glew discloses conductive material that extends to the lateral edges of the dielectric material as required by claims 1 and 18. As such, Petitioner has not shown a by a preponderance of the evidence that Glew anticipates independent claims 1 or 18 or the challenged claims that depend therefrom.” slip op. at 42
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“Thus, although the Specification does not use the term “lateral edge,” the Specification and figures of the ’030 patent make clear, that in the embodiments having a conductive layer that extends to the edges of the dielectric layers of the tape, the referred to “edge” is the edge of the “long side” of the tape that extends in the longitudinal direction. See, e.g., Ex. 1001, 7:49–51 (stating in some embodiments conductive layer 302 may not extend to the edge of tape 110), 8:1–25 (stating, inter alia, pairs 102 could electrically couple to the corresponding edge 306 resulting in increased ANEXT), 8:41–46, 10:30–36 (stating that the tape edge lies over a pair of conducts and the pair generates more ANEXT). Our construction of term “lateral edge” is supported by Roberts, which also refers to the edges of the long side of the tape extending in the longitudinal direction as the “lateral edges.” See, e.g., Ex. 1009, 2:20–24 (“a shield made from a plurality of tapes helically disposed, the lateral edges of which overlap adjacently lying tapes”), 2:42–46 (“a shield composed of a plurality of …, the lateral edges of which overlap adjacently disposed tapes”), 4:27–33 (“the plastic-coated metal foil shield (15) [FIG. 2] has lateral edges that overlap,” “the lateral edges of the shield overlapping one another”), 4:34–40 (“The lateral edges of the helically disposed tapes [of FIG. 3] overlap adjacently lying tapes.”), 5:65-75 (“the shield (15) [of FIG. 10] is made up of a plurality of tapes, the lateral edges of which overlap adjacently disposed like tapes”), Figs. 2, 3, 10. We credit Dr. Eldering’s testimony that these disclosures of Roberts shows that a POSITA would understand that a tape’s “lateral edges” are the edges running along the sides of the tape parallel to the longitudinal direction. See Ex. 2001 ¶¶ 64–65; see also Thales Visionix, Inc. v. United States, 415 F.3d 1335, 1348 (Fed. Cir. 2020) (considering whether the proposed claim construction is “consistent with the prior art’s usage of that term”).” slip op. at 19
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“contentions set forth in its Petition are insufficient to show that Cook discloses a barrier tape having a conductive material contained between two layers of dielectric material where the conductive material extends to each lateral edge of the two layers of the dielectric material, as required by claims 1 and 18, and further that the conductive material be continuous as required by claim 1. We agree with Patent Owner that Petitioner relies on multiple disparate embodiments of Cook for each of these limitations without sufficiently articulating how a single embodiment satisfies the requirements of claim 1 or 18 or articulating how the disparate embodiments may be combined to arrive at claim 1 or 18. See, e.g., PO Resp. 18–25; Pet. 18–21; see also NetMoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1371 (Fed. Cir. 2008) (stating in order to establish anticipation, “it is not enough that the prior art reference . . . include multiple, distinct teachings that the artisan might somehow combine to achieve the claimed invention” and that the “reference must clearly and unequivocally disclose the claimed [invention] or direct those skilled in the art to the [invention] without any need for picking, choosing, and combining various disclosures not directly related to each other by the teachings of the cited reference”).” slip op. at 29
Patent outcomesUS 9,991,030 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,991,030 - PTAB · Nov 26, 2024 · IPR2024-00936 · APJ Bart A Gerstenblith · IPR · Institution
The Board instituted IPR on all challenged claims and grounds, finding a reasonable likelihood that claims 1, 5, 8, 9, 11–19, 23, 26, 27, and 29–36 are obvious over Tayloe, TI Datasheet, and Macnally.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“https://www.uspto.gov/sites/default/files/documents/interim_proc_discretion ary_denials_aia_parallel_district_court_litigation_memo_20220621_.pdf, the PTAB will not discretionarily deny institution of an IPR . . . in view of parallel district court litigation where a petitioner stipulates not to pursue in a parallel district court proceeding the same grounds as in the petition or any grounds that could have reasonably been raised in the petition. Petitioner’s stipulation (Ex. 1041) satisfies the language from the Director’s Memorandum quoted above. Therefore, we need not analyze each Fintiv factor to reach the determination that we will not exercise our discretion to deny institution in view of the parallel Western District of Texas Litigation.” slip op. at 11
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Accordingly, on the present record at this stage of the proceeding and for the reasons discussed above, we find that Petitioner has shown a reasonable likelihood of establishing that one of ordinary skill in the art would have been motivated to combine the teachings of Tayloe, TI Datasheet, and Macnally with a reasonable expectation of success. Patent Owner is invited to elaborate further on its positions in future briefing with potential expert support.” slip op. at 35
- Skill levelSkill level petitioner adoptedDecided for petitioner
“person of ordinary skill in the art at the time of the invention would have had “at least a bachelor’s degree in electrical engineering or a related subject and two or more years of experience in the field of EM circuit design.” Pet. 6 (citing Ex. 1003 ¶¶ 68–71). Petitioner further proposes that “[l]ess work experience may be compensated by a higher level of education, such as a master’s degree.” Id. Patent Owner does not take a position, in the Preliminary Response, on the level of ordinary skill in the art. See generally Prelim. Resp. On the present record at this stage of the proceeding, we adopt Petitioner’s uncontested, proposed level of ordinary skill in the art, which we find consistent with the level of ordinary skill in the art reflected by the ’528 patent and the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978).” slip op. at 12
- Prior constructionPrior construction adoptedTerm construed petitioner constructionDecided for petitioner
“their plain and ordinary meaning, with one exception. Pet. 3. Specifically, Petitioner asserts “storage element” or “energy storage element” are recited “interchangeably” in the claims and should each be construed to mean “an element of a system that stores non-negligible amounts of energy from an input EM signal,” which Petitioner notes was “determined by the Board and affirmed by the [U.S. Court of Appeals for the] Federal Circuit.” Id. (citing ParkerVision, Inc. v. Vidal, 88 F.4th 969, 976 (Fed. Cir. 2023) (holding “ParkerVision acted as its own lexicographer to define the term ‘storage element’” and “the Board’s construction of ‘storage element’ [(quoted above)] correctly tracks the lexicography provided by [ParkerVision]”) (citing U.S. Patent No. 6,061,551 (“the ’551 patent”), 66:55–67)). Petitioner contends that, like U.S. Patent No. 7,110,444 that was at issue in ParkerVision v. Vidal, the ’528 patent also incorporates the ’551 patent by reference. Pet. 4 (citing Ex. 1001, 1:30–34). And Petitioner notes that the ’528 patent “includes an identical disclosure to that deemed dispositive from the incorporated by reference ’551 patent.” Id. (citing Ex. 1001, 73:9–22 (which Petitioner contends defines “storage module”)). Further, Petitioner asserts “[n]o intrinsic evidence demands a different construction” because, even though claim 1 recites “system,” “energy,” and “transfer,” it does so “in isolation” and “does not recite ‘energy transfer system,’ let alone restrict the claimed ‘storage element’ to any energy transfer system.” Id. at 5 (also contending the file history of the ’528 patent does not support a different construction). Petitioner also contends “the proposed combinations teach the claimed ‘storage element’ or ‘energy storage element,’ even including the alleged condition of ‘low impedance load’ that purportedly ‘goes to the heart of what makes an element, a “storage” element.’” Id. Patent Owner does not take a position on claim construction in the Preliminary Response. See generally Prelim. Resp. On the present record at this stage of the proceeding, we agree with Petitioner, for the reasons discussed above, that “storage element” and “energy storage element” are used interchangeably in the claims and should be construed consistently with our prior construction of “storage element,” which, as noted above, was affirmed by the Federal Circuit, to mean “an element of a system that stores non-negligible amounts of energy from an input EM signal.” We need not construe any other claim terms expressly because there is no present controversy as to the meaning of any other claim terms in this proceeding. Realtime Data, 912 F.3d at 1375.” slip op. at 14
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 9,118,528 - PTAB · Nov 26, 2024 · IPR2024-00935 · APJ Bart A Gerstenblith · IPR · Institution
The Board instituted IPR on claim 14 over all three obviousness grounds, finding a reasonable likelihood of success on the Tayloe and TI Datasheet ground.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner
“As set forth in the Director’s Memorandum, Interim Procedure for Discretionary Denials in AIA Post-Grant Proceedings with Parallel District Court Litigation (dated June 21, 2022), at 7, available at https://www.uspto.gov/sites/default/files/documents/interim_proc_discretion ary_denials_aia_parallel_district_court_litigation_memo_20220621_.pdf, the PTAB will not discretionarily deny institution of an IPR . . . in view of parallel district court litigation where a petitioner stipulates not to pursue in a parallel district court proceeding the same grounds as in the petition or any grounds that could have reasonably been raised in the petition. Petitioner’s stipulation (Ex. 1041) satisfies the language from the Director’s Memorandum quoted above. Therefore, we need not analyze each Fintiv factor to reach the determination that we will not exercise our discretion to deny institution in view of the parallel Western District of Texas Litigation.” slip op. at 7
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“h. Summary as to Claim 14 For the reasons discussed above, on the present record we find that Petitioner has established that the combination of Tayloe and TI Datasheet teaches each of the elements of claim 14 and that one of ordinary skill in the art would have been motivated to combine the teachings of these two references as proposed by Petitioner with a reasonable expectation of success in so doing. 3. Objective Indicia of Nonobviousness In the record presently before us, neither Petitioner nor Patent Owner has presented any evidence of objective indicia of nonobviousness. 4. Weighing the Graham Factors “Once all relevant facts are found, the ultimate legal determination [of obviousness] involves the weighing of the fact findings to conclude whether the claimed combination would have been obvious to an ordinary artisan.” Arctic Cat, 876 F.3d at 1361. On balance, considering the record presently before us, Petitioner has established a reasonable likelihood that it would prevail in showing that the combination of Tayloe and TI Datasheet would have rendered the subject matter of claim 14 of the ’177 patent obvious to one of ordinary skill in the art at the time of the invention.” slip op. at 35
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“At this stage of the proceeding and on the present record, we need not construe the term expressly because, for the reasons discussed below, we find that Petitioner has established a reasonable likelihood of showing that claim 14 would have been obvious to one of ordinary skill in the art under each construction, and because there is no present controversy as to the meaning of the term in this proceeding. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 13
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“A datasheet is a well-known resource for learning detailed information of the multiplexer/demultiplexer, and a [person of ordinary skill in the art] would have been motivated to consult the TI Datasheet for a more complete understanding of Tayloe’s express teachings of the SN74CBT3253 demultiplexer, the only matching multiplexer available at the time. [Ex. 1023; Ex. 1003] ¶¶ 100–109; see also Bayer Healthcare Pharms., Inc. v. Watson Pharms., Inc., 713 F.3d 1369, 1374–75 (Fed. Cir. 2013) (obvious to combine two prior art references where one reference “refers expressly” to the other). When viewing the detailed diagram of the SN74CBT3253 demultiplexer, a [person of ordinary skill in the art] would have been motivated to apply four of the switches because the architecture of one switch on the demultiplexer is analogous to one of the four switching paths of Tayloe’s commutating switch 38. [Ex. 1003 ¶¶] 100–109. Thus, a [person of ordinary skill in the art] would have thought to implement the multiplexer switches from TI Datasheet in an analogous manner “by simple substitution of one known element for another.” Pet. 23–24 (citing Ex. 1003 ¶¶ 100–109; KSR, 550 U.S. at 401).” slip op. at 20
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 7,865,177 - Mediatek Inc. v. Parkervision, Inc.InstitutedPTAB · Nov 26, 2024 · IPR2024-00796 · APJ Iftikhar Ahmed · IPR · Institution
The Board instituted IPR on claims 1–20, finding a reasonable likelihood that claims 1 and 11 would be obvious over Nevo and Avitabile.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. See 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2022). To institute an inter partes review, we must determine that the information presented in the Petition shows “a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Based on the information presented in the Petition and the supporting evidence, we are persuaded that there is a reasonable likelihood that Petitioner would prevail with respect to at least one of the challenged claims. Accordingly, we institute an inter partes review of the challenged claims on the grounds set forth in the Petition.” slip op. at 2
- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“Stipulate[s] and agree[s] that, if the PTAB institutes an inter partes review proceeding (“IPR”) for U.S. Patent No. 7,483,686 on the grounds presented in [the Petition], [Petitioner] will not pursue an invalidity defense in [the Western District of Texas Litigation] that the patent claims subject to the instituted IPR are invalid based on the same grounds as in the [P]etition or any grounds that could have reasonably been raised in the [P]etition. Ex. 1015 (letter from M. Bernstein to J. Charkow, dated May 21, 2024); see also Prelim. Reply 1 (“Patent Owner’s Preliminary Response (Paper 6) fails to acknowledge, much less address, Petitioner’s Sotera stipulation not to pursue in the related litigation the same grounds or any grounds of invalidity that could reasonably have been raised in this IPR.”); Sotera Wireless, Inc. v. Masimo Corp., IPR2020-01019, Paper 12 (Dec. 1, 2020) (Decision Granting Institution) (precedential as to § II.A).” slip op. at 8
- Skill levelSkill level petitioner adoptedDecided for petitioner
“would have had at least a bachelor’s degree in electrical engineering or a related subject and two or more years of experience in the field of [radio frequency (‘RF’)] circuit design, or at least five years of work experience and training in the design and development of RF circuits and/or systems,” and “[l]ess work experience may be compensated by a higher level of education, such as a master’s degree.” Pet. 14–15 (citing Ex. 1002 ¶ 38). Patent Owner does not address the level of ordinary skill in the art in its Preliminary Response. See generally Prelim. Resp. We determine, on the current record, that Petitioner’s proposed level of ordinary skill is consistent with the ’686 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d at 1579. We adopt that level of ordinary skill in the level of ordinary skill in the art based on the full trial record. slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Petitioner contends that all claim terms should be given their plain and ordinary meaning. Pet. 15 (citing Ex. 1002 ¶ 74). Petitioner, however, notes that several claim terms in the ’686 patent, or closely related claim terms for patents related to the ’686 patent, have been construed during prior litigation involving Patent Owner. Id. Petitioner discusses five claim terms and various constructions proposed or adopted in prior litigation. Id. at 15–20.” slip op. at 11
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 7,483,686
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.