- Inductev, Inc. v. Witricity CorporationAll claims unpatentablePTAB · May 20, 2025 · IPR2024-00105 · APJ Christopher L Ogden · IPR · Final written decision
Claims 1–13 and 16 are unpatentable as obvious under § 103(a) over the stated Fells-based grounds.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner argues that a person of ordinary skill in the art “would have had . . . a bachelor’s degree in electrical engineering, microelectronics, or equivalent, and . . . two to three years of industry or research experience,” and “a higher level of education or skill might make up for less experience, and vice-versa.” Pet. 6 (citing Ex. 1003 ¶¶ 39–44). Patent Owner “does not disagree with Petitioner’s definition of the level of ordinary skill in the art,” but “does not believe that resolution of the Petition depends on the precise definition of the level of ordinary skill.” PO Resp. 12. Petitioner’s proposed articulation is supported by testimonial evidence and appears consistent with the types of problems and solutions in the ’184 patent. See Ex. 1001, 1:15–2:53. As it is uncontested, we adopt it for this decision.” slip op. at 5
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“The parties agree that the terms of the contested claims should be given their ordinary and customary meaning, but neither party argues that we should construe any claim terms explicitly. Pet. 6 (citing Ex. 1003 ¶¶ 62– 63); PO Resp. 12. We agree with the parties that, for this decision, we do not need to construe any of the terms explicitly. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). However, the meaning of certain terms are contested, including most notably “magnetic field sensor,” and we discuss those terms below in the context of the prior art.” slip op. at 6
- Claim Construction › Intrinsic evidence (Phillips canons) › Preamble limiting or notNot reached
“Petitioner argues that, to the extent the preamble is limiting, Fells discloses the recited wireless energy transfer system, and that the system includes facilities to detect FOD. Pet. 8–9 (citing Ex. 1005 ¶ 191, Fig. 2; Ex. 1003 ¶¶ 66–71, 96–101). Patent Owner does not specifically contest Petitioner’s arguments. See PO Resp. We agree with Petitioner’s argument that Fells discloses the preamble; thus, we need not decide whether the preamble is limiting. See Ex. 1005 ¶ 191, Fig. 2.” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“We disagree with Patent Owner’s argument that the ordinary and customary meaning of “magnetic field sensor” refers to a device that measures only external magnetic fields. There is nothing in the claim language to suggest such a limitation: the plain language simply refers to a “magnetic field sensor,” without regard to how the sensor works or where it senses magnetic fields from. Ex. 1001, 12:16. In fact, the claim does not explicitly require sensing anything at all using the magnetic field sensor, merely reciting a “foreign object debris detection system” comprising the sensor and that the “foreign object debris detection system is configured to verify” the presence of FOD. The very general nature of how the magnetic field sensor is recited, without any explicit recitation of how its output may be used, undermines Patent Owner’s overly restrictive interpretation. Although the ’184 patent specification includes examples of measuring external magnetic fields to detect FOD, Patent Owner has not pointed to anything in the specification indicating an intent to restrict the term “magnetic field sensor” to only those sensors that measure external magnetic fields. Nor is there intrinsic evidence that an “eddy-current sensor” would not also be a magnetic field sensor, given that it senses magnetic fields. Indeed, as Petitioner persuasively argues, an eddy-current sensor still measures external magnetic fields—albeit magnetic fields generated within FOD through interaction with a powered sensor. Pet. 6–7; Ex. 1037 ¶¶ 14– 16, 25–29.” slip op. at 17
Patent outcomesUS 10,027,184 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,027,184 - Inergy Technology, Inc. v. Force Mos Technology Co., Ltd.Some claims unpatentablePTAB · May 16, 2025 · IPR2024-00094 · APJ Mary C Hoffman · IPR · Final written decision
Claims 1 and 3–5 are unpatentable over Kobayashi and Hshieh; claims 2 and 6 were not shown unpatentable over the asserted combinations.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner asserts that a person of ordinary skill in the art (“POSITA”), “at the filing date of the ’409 [p]atent[,] would have a master’s degree in electrical engineering, and at least two years of relevant work experience in the field of integrated circuit design and manufacturing.” Pet. 13 (citing Ex. 1003 ¶ 52). Patent Owner does not dispute Petitioner’s proffered level of ordinary skill in the art. PO Resp. 9 (citing Ex. 2021 ¶ 55). We adopt Petitioner’s proffered level of ordinary skill in the art, which is supported by unopposed declaration testimony and consistent with the ’409 patent and prior art of record. See, e.g., Ex. 1001, 1:6–3:8 (describing the invention and related art in terms of integrated circuit design and fabrication). Neither party, moreover, indicates the overall result would change based on a different definition.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner
“Based on the arguments and evidence, we disagree with Petitioner’s proposed construction requiring the corners to be rounded via a particular process, because doing so would improperly import a process of manufacture from the Specification into apparatus claims. See Cont’l Circuits LLC v. Intel Corp., 915 F.3d 788, 799 (Fed. Cir. 2019) (explaining that, generally, a novel product that meets the criteria of patentability is not limited to the process by which it was made, however, process steps can be treated as part of a product claim if the patentee has made clear that the process steps are an essential part of the claimed invention). Here, the portions of the Specification relied on by Petitioner (Ex. 1001, 2:10–20, 4:53–64) disclose a process for manufacturing but do not make clear that the process is an essential part of the claimed invention. We also disagree with Petitioner’s assessment of the prosecution history, i.e., that the claims were amended to distinguish the claimed rounded corners from Pfirsch’s rounded corners, which, presumably, are formed as an incidental result of lithography. On the contrary, the Examiner found (and Patent Owner acknowledged) that Pfirsch has rounded corners. Ex. 1002, 276, 295, 302. As Patent Owner correctly points out, the claims were amended during prosecution to include a “circular” contact to distinguish over Pfirsch’s square contact. See id. Petitioner does not otherwise point to evidence that Patent Owner clearly and unmistakably limited the claim scope to rounded corners formed by a particular process.” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“is ‘known’ is not sufficient for a motivation to combine.” PO Resp. 47. However, the motivation-to-combine analysis is a flexible one, and the “known-technique” rationale is adequate to show a motivation to combine. For example, “if a technique has been used to improve one device, and a person of ordinary skill in the art would recognize that it would improve similar devices in the same way, using the technique is obvious unless its actual application is beyond his or her skill.” KSR, 550 U.S. at 417; see also Intel Corp. v. PACT XPP Schweiz AG, 61 F.4th 1373, 1380 (Fed. Cir. 2023) (quoting Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 799–800 (Fed. Cir. 2021) (“If there’s a known technique to address a known problem using ‘prior art elements according to their established functions,’ then there is a motivation to combine.”). Here, as discussed above, the record shows that top view rounding was a known technique to eliminate corners, and that corners were a known problem (e.g., corners tend to reach undesirable higher peak electric field leading to premature breakdown voltage). See, e.g., Ex. 1003 ¶¶ 37, 39, 42– 44, 55–57, 122, 133, 135–141; Ex. 1005, 7:57–8:4; Ex. 1006, 1:18–21, 2:19–39, 5:3–17, Figs. 6A–8B; Ex. 1011, 1:29–41; Ex. 1012; PO Resp. 13, 46 (citing Ex. 1011, 1:34–40); Ex. 2021 ¶ 87. Furthermore, there is no dispute that modifying Kobayashi to eliminate corners via top view rounding was anything more than a “minor and commonplace modification” of cell shape within the skill of an ordinary artisan, or that top view rounding would change Kobayashi’s established function. Pet. 60; Ex. 2021 ¶ 86.” slip op. at 30
- Obviousness (§103) › KSR rationalesMotivation foundUnpatentable
“We agree that Kobayashi’ s Figure 5A solely cannot be relied upon as disclosing the claimed diameter. See Hockerson-Halbertstadt, Inc. v. Avia Group Int'l, 222 F.3d 951, 956 (Fed. Cir. 2000) (patent drawings not designated as being drawn to scale cannot be relied upon to define precise proportions of elements if the specification is completely silent on the issue). However, we do not agree that Petitioner failed to show Kobayashi suggests the recited diameter. We disagree with Patent Owner’s assertion that Dr. Liu’s “vague, purported ‘design considerations’” are “unsupported.” PO Resp. 43. Although Kobayashi is silent on the width/diameter of the trench contact in Figure 5A, Kobayashi discloses trenched gates having dimensions below 0.5 μm, which demonstrates that it was known in the art, and required no more than an exercise of ordinary skill in the art, to create trenched features of widths well below 1 μm. Kobayashi also discloses that the width of each trench, and the distance between the adjacent trenches (which includes the trench contact), must be selected to optimum sizes . . . [and] these sizes . . . have some degrees of freedom.” Ex. 1005, 7:42–48. This demonstrates a POSITA would seek to optimize trench contact width or diameter. Dr. Liu’s testimony regarding design considerations suggests the desirability of a reduced diameter trench contact, e.g., to minimize the width of the trench contact for purposes of easier filling, to minimize the total width of the unit cell, and to minimize manufacturing time by reducing etch back time. See Ex. 1003 ¶¶ 111–114. As Patent Owner acknowledges, “there is always a motivation to speed up the fabrication process or shrink feature sizes of semiconductors.” PO Resp. 43 (citing 2021 ¶ 131). However, contrary to Patent Owner’s arguments, these are not generic motivations “untethered” from Kobayashi. Id. Indeed, Kobayashi directly addresses the fabrication process (including new techniques to obtain trench widths under 0.5 μm) and the need to optimize the size of trench gates and the space in between (which includes the trench contact). Ex. 1005, 7:43–54, 7:19–9:53. Patent Owner also argues that Petitioner presents no evidence that modifying Kobayashi to have a diameter smaller than 1 μm is predictable. PO Resp. 44. We disagree. As discussed above, Petitioner points to Kobayashi’s teachings that the sizes are to be optimized and that the trench gate width is smaller than 0.5 μm, which suggests making other trench features of that width was within ordinary skill. Ex. 1003 ¶ 112. Furthermore, Kobayashi’s silence as to the dimensions of the trench contact suggests that the trench contact diameter dimension is likely in the ballpark of the other explicitly disclosed trenched feature dimensions and is a matter of routine optimization. In addition, Patent Owner advances no persuasive evidence that the claimed diameter produces unexpected results or is otherwise critical. Patent Owner also argues that reducing trench contact diameter has downsides (i.e., reduced ease of filling for metal plugs and reduced current carrying capacity) not addressed by Petitioner; however, Petitioner is not required to address those tradeoffs in its Petition, and we do not see how those tradeoffs would prevent the proposed combination. PO Resp. 44; see Medichem, S.A. v. Rolabo, S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006) (“a given course of action often has simultaneous advantages and disadvantages, and this does not necessarily obviate motivation to combine.”); Winner Int'l Royalty Corp. v. Wang, 202 F.3d 1340, 1349 n.8 (Fed. Cir. 2000) (“The fact that the motivating benefit comes at the expense of another benefit, however, should not nullify its use as a basis to modify the disclosure of one reference with the teachings of another. Instead, the benefits, both lost and gained, should be weighed against one another.”). Here, Dr. Liu listed numerous benefits of having a reduced diameter, which weigh against the potential downsides raised by Patent Owner. Ex. 1003 ¶¶ 111–114. Moreover, we do not see how the downsides/tradeoffs prevent modifying Kobayashi in the manner suggested when the same tradeoffs appear to be applicable to the ’409 patent. Having considered Patent Owner’s arguments, and taking into” slip op. at 43
Patent outcomesUS 7,812,409 mixedClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,812,409 - Inergy Technology, Inc. v. Force Mos Technology Co., Ltd.No claims unpatentablePTAB · May 16, 2025 · IPR2024-00093 · APJ Grace Karaffa Obermann · IPR · Final written decision
Claims 1–9 were not proven unpatentable because the asserted references did not establish the claimed epitaxial layer or the required coverage of the trench sidewalls.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner defines a person of ordinary skill in the art as having “a Master’s degree in electrical engineering, and at least two years of relevant work experience in the field of integrated circuit design and manufacturing.” Pet. 13 (citing Ex. 1003 ¶¶ 32–37, 57). Patent Owner does not dispute Petitioner’s definition. PO Resp. 6. We adopt Petitioner’s proposed definition of the level of ordinary skill in the art because it is supported by unopposed declaration testimony and appears to be consistent with the disclosures of the ’634 patent and the asserted prior art references. See Ex. 1001, 1:6–2:33 (describing the invention and related art in terms of integrated circuit design and fabrication); see also Ex. 1006 ¶¶ 1–6 (Hirler); Ex. 1008 ¶¶ 1–37 (Kobayashi); Ex. 1009 ¶¶ 2–29 (Shiraishi). Neither party, moreover, indicates the overall result would change based on a different definition.” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“Petitioner argues that “the sidewalls of said trenches in said base layer are covered” should be construed to mean that “the entire sidewalls of” those trenches are covered. Pet. 18–19. We refer to this as “the sidewall limitation.” Petitioner shows persuasively that the disclosure and file history of the ’634 patent support its position on the sidewall limitation. Id. Patent Owner, for its part, observes that, after the filing of the Petition. two District Courts adopted the construction proposed by Petitioner.” PO Resp. 21 (citing Ex. 2010, 6–9; Ex. 2011, 23). Patent Owner also agrees to apply Petitioner’s construction for purposes of this proceeding. Id. We agree with Patent Owner that an express construction of the sidewall limitation is necessary to this Decision, id., and adopt Petitioner’s undisputed definition because it is supported by the record. No other claim term requires express construction for purposes of this Decision.” slip op. at 8
- BurdenNot shown unpatentable
“On this record, Petitioner fails to demonstrate that any claim is unpatentable under any ground asserted in the Petition. IV. CONCLUSION For the above reasons, we determine that Petitioner fails to establish by a preponderance of the evidence that claims 1–9 of the ’634 patent are unpatentable.” slip op. at 34
- Expert testimonyPetitioner expert discountedPatent owner expert creditedDecided for patent owner
“Alternatively, even if we set aside that timing issue, Dr. Liu’s bare opinion, advanced for the first time during cross-examination, that an epitaxial layer is “obvious” from Hirler’s disclosure is inadequate to support the challenges. Id. at 24–25. We accord little weight to Dr. Liu’s opinion because it is conclusory. See Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential). In any event, Petitioner does not meet, on this record, the “high standard” required to establish an inherent disclosure of an epitaxial layer in Hirler. PO Resp. 24.6 Dr. Liu opined for the first time during cross-examination “that it would have been impossible to create Hirler’s more lightly doped n- drift zone layer on top of its more heavily doped n+ substrate layer other than via epitaxy.” Id. at 25 (citing Ex. 2014, 164:16– 165:20). But Patent Owner effectively refutes that proposition with evidence that such a layer “could be created by counter-doping,” even if, as Dr. Liu contends, counter-doping may have been less ideal due to “disadvantageous mobility.” Id. (citing Ex. 2012 ¶ 133; Ex. 2014, 166:15–167:8).” slip op. at 11
Patent outcomesUS 7,629,634 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,629,634 - Inductev, Inc. v. Witricity CorporationSome claims unpatentablePTAB · May 16, 2025 · IPR2024-00140 · APJ Christopher L Ogden · IPR · Final written decision
Claims 1, 7–10, 12–16, 18, and 19 are unpatentable over the stated grounds; claims 4–6 were not shown unpatentable because the proposed multi-coil alignment lacked prior-art support.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner argues that a person of ordinary skill in the art “would have had . . . a bachelor’s degree in electrical engineering, microelectronics, or equivalent and . . . two to three years of industry or research experience in the field of wireless energy transfer,” and that “a higher level of education or skill might make up for less experience, and vice-versa.” Pet. 6 (citing Ex. 1003 ¶¶ 39–44). Patent Owner does not contest this. See PO Resp. Petitioner’s proposed articulation is supported by testimonial evidence and appears to be consistent with the types of problems and solutions in the ’654 patent. See Ex. 1001, 1:15–28. We adopt it for this decision.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We agree with Petitioner that the evidence does not suggest (and Patent Owner does not explicitly argue) that the terms “transmitting antenna” and “receiving” antenna depart from the ordinary and customary meanings of those terms. Pet. 1–2. However, for the reasons discussed below, the outcome of our decision would be the same whether we adopted Petitioner’s or Patent Owner’s proposed construction. Thus, we need not adopt either party’s proposed construction for this decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 9
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for patent owner
“spaced configuration are not confined to ferrite cores 32 and 3, and that at least a component of the flux lines will escape the cores. See Ex. 1032 ¶¶ 48–52; Ex. 1038 ¶ 54 Fig. 2. Indeed, the evidence suggests (and Dr. Horenstein acknowledges in his first declaration) that at least a component of flux will escape the core of even a traditional transformer. See Ex. 1032 ¶¶ 45–47; Ex. 1044, 6; Ex. 2001 ¶ 27. In his second declaration, Dr. Horenstein provides contrary testimony that in Odachi’s open configuration during alignment, cores 32 and 3 “act to confine or guide the magnetic flux lines, rather than radiate them into free space,” and “the flux lines would [not] leave the gap area and enter into the space distal to the magnetic circuit.” Ex. 2010 ¶ 69. But in view of Dr. Horenstein’s contrary position in his first declaration, and the lack of supporting evidence in his second, we do not find it credible. 37 C.F.R. § 42.65(a) (2022) (“Expert testimony that does not disclose the underlying facts or data on which the opinion is based is entitled to little or no weight.”); Apple Inc. v. MPH Techs. Oy, 28 F.4th 254 (Fed. Cir. 2022).” slip op. at 24
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“(4) Analysis We are persuaded by Petitioner’s argument that during the alignment process in Odachi corresponding to claim 13, there is a “spaced distance between the primary inductive coupler [230] and the secondary inductive receptacle 2” which is “reduced gradually and electromagnetic induction occurs between the coupler to the receptacle when the former coupler comes close to the latter receptacle.” Ex. 1005, 6:1–6. Thus, prior to any contact or precise alignment between the two cores, “an electromotive force is induced in the secondary coil 4 and this induced force is increased with the decrease in the spaced distance.” Id. at 6:6–8. At least in that spaced configuration, the evidence of record suggests that primary coil 31 produces a near-field component of flux into free space (the air space between the coils where there is no intervening core material) that is intercepted by secondary coil 4 to effect resonant inductive coupling, and that secondary coil 4 intercepts and receives the near-field component of flux in free space that is generated by primary coil 31 to effect resonant inductive coupling. See Ex. 1032 ¶¶ 48–52, 55. Thus, we find that Odachi discloses a “transmitting antenna” (coil 31) and a “receiving antenna” (coil 4) under Patent Owner’s proposed construction. We would reach the same finding under Petitioner’s proposed broader construction because the evidence suggests that Odachi’s coils 31 and 4 would have been considered “antennas” under the parties’ uncontested definition of that term, which is “a device that radiates and/or receives radio waves.” See id. ¶¶ 43–47, 53–54; Ex. 1032 ¶ 15 (Dr. Allen agreeing with this definition of “antenna”); Ex. 2001 ¶ 25 (Dr. Horenstein agreeing with this definition of “antenna”)). In addition, Petitioner persuasively shows that the free space between Odachi’s coils in the spaced configuration includes the “near-field region,” which includes the induction field around primary coil 31. See Ex. 2006, 498; Ex. 1045, 5:4–7; Ex. 1032 ¶¶ 53–54). Dr. Horenstein’s testimony does not contradict this. Although he points out that there are separate terms for inductive, near, and far fields, he also acknowledges that “[t]he region of space closer to the antenna than the far field is the near-field region.” Ex. 2010 ¶ 37 (citing Ex. 2006, 275).8” slip op. at 22
Patent outcomesUS 8,466,654 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,466,654 - Innolux Corporation v. Phenix Longhorn LLCInstitution deniedPTAB · May 15, 2025 · IPR2025-00043 · APJ Kevin F Turner · IPR · Institution
The Board denied institution of IPR challenging claims 1–5 and 8–14, exercising § 314(a) discretion under Fintiv based on the Texas litigation.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Institution denied fintivInstitution denied
“We agree with Patent Owner that its asserted trial date of February 17, 2026, would likely occur approximately 4 months before the latest date on which a final decision can be issued in this proceeding (June 12, 2026), and that is the metric we should use to determine the proximity of trial date to the projected statutory deadline. Accordingly, the facts underlying this factor weigh in favor of denial.” slip op. at 9
Discretionary denialPatents in suitUS 7,233,305 - Tableau Software, LLC v. Icharts LLCInstitution deniedPTAB · May 14, 2025 · IPR2024-01389 · APJ David C Mckone · IPR · Institution
The Board denied institution for claims 1–4 because Petitioner did not show a reasonable likelihood of establishing unpatentability under any asserted obviousness ground.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“review. See 35 U.S.C. § 314 (2016); 37 C.F.R. § 42.4(a) (2019). The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons explained below, we do not institute an inter partes review of the ’000 patent.” slip op. at 2
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We construe a claim “using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b), including construing the claim in accordance with the ordinary and customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b) (2019); see also Phillips v. AWH Corp., 415 F.3d 1303 (Fed. Cir. 2005) (en banc). Neither party proposes construing any claim term. Pet. 6; Prelim. Resp. 36. Based on the record before us, we do not find it necessary to provide express claim constructions of any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 7
- Skill levelSkill level board ownOther
“3 The parties do not dispute that a skilled artisan “would have had a B.S. degree in Computer Science, Computer Engineering, or equivalent experience relating to computing, as well as two to three additional years of academic or industry experience related to web application development and data visualization services.” Pet. 6 (citing Ex. 1003 ¶ 85); Prelim. Resp. 35– 36. 4 The record does not include allegations or evidence of objective indicia of nonobviousness.” slip op. at 8
- Expert testimonyPetitioner expert discountedPatent owner expert creditedOther
“connotes interactivity, and does not explain why a “Data Animation Effect” would be interactive.6 These aspects of Figure 53 do not appear to show interactivity. Thus, the issue is whether selecting a choice other than “Hide” for “Scroll buttons” in box 710 of Figure 53 adds to chart 840, once published, a feature that allows a user to interact with that chart via scrolling, or whether “Scroll buttons” refers to some other feature of the configuration process (such as the scroll buttons shown in Figure 53 for scrolling through the various charts in the layout). Both experts provide conclusory testimony stating how they view Figure 53. Ex. 1003 ¶ 181 (“For example, Figure 53 of Rostoker shows the ‘Configure Chart View’ toolbar, which includes multiple ‘interactive’ features, such as making the chart ‘Selectable’ (suggesting interactivity using an input device such as a mouse), including ‘Scroll buttons’ to scroll the chart, and adding ‘Data Animation[s].’”); Ex. 2001 ¶ 141 (“Schmandt relies on the ‘Configure Chart View’ toolbar of FIG. 53 of Rostoker, but he is confusing the configuration step 330 of Rostoker with the end result.”). Petitioner invites us to speculate as to the behavior of features that are depicted in Figure 53 but otherwise are not described in any meaningful detail by Rostoker. We conclude that this is insufficient to show a reasonable likelihood of prevailing.” slip op. at 13
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,520,000 - Tableau Software, LLC v. Icharts LLCInstitution deniedPTAB · May 14, 2025 · IPR2024-01388 · APJ David C Mckone · IPR · Institution
The Board denied institution for claims 1–18 because the petition did not show a reasonable likelihood that any challenged claim was unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“review. See 35 U.S.C. § 314 (2016); 37 C.F.R. § 42.4(a) (2019). The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons explained below, we do not institute an inter partes review of the ’595 patent.” slip op. at 2
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We construe a claim “using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b), including construing the claim in accordance with the ordinary and customary meaning of such claim as understood by one of ordinary skill” slip op. at 6
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“We agree with Patent Owner. At most, Jou teaches that it was known to interact with charts in a Windows environment or a browser window. Ex. 1007 ¶ 34. But Rostoker already teaches that a user could interact with a chart, via a graphical user interface in a web browser, while configuring the chart. Ex. 1005 ¶¶ 67–75. Petitioner does not explain persuasively why a skilled artisan, per the teachings of Jou, would have made Rostoker’s published charts interactive. Mr. Schmandt’s testimony that a skilled artisan “would have been motivated to incorporate Jou’s additional ‘interactive’ features into Rostoker’s system to enable users to better visualize and explore business data,” is not supported by his citations to Jou, at least as to whether a skilled artisan would have modified Rostoker’s published charts. Ex. 1003 ¶ 259 (citing Ex. 1007 ¶¶ 8, 9). Petitioner’s argument that Flash and Java could enable interactive features, at most, show that a skilled artisan could have implemented interactive features with Rostoker’s a reason why a skilled artisan would have made these modifications. See Auris Health, Inc. v. Intuitive Surgical Operations, Inc., 32 F.4th 1154, 1158 (Fed. Cir. 2022) (“The motivation-to-combine inquiry asks whether a skilled artisan ‘not only could have made but would have been motivated to make the combinations . . . of prior art to arrive at the claimed invention.’” (quoting Belden Inc. v. Berk-Tek LLC, 805 F.3d 1064, 1073 (Fed. Cir. 2015) (emphasis omitted))). Thus, we are not persuaded that Petitioner is likely to show that a skilled artisan would have incorporated Jou’s interactive features into Rostoker to make Rostoker’s published charts interactive.” slip op. at 35
- Expert testimonyPetitioner expert discountedDecided for patent owner
“client is required for display and usage of an existing QlikView document (.qvw file). While the QlikView Server is responsible for opening, hosting, and calculating the document, the clients are required for user interaction and presenting the document and its objects.” Ex. 1009, 123. Petitioner points to no persuasive evidence that a Java or AJAX object or client executing at a web browser is a website separate from the server that serves the object or client. Mr. Schmandt makes conclusory statements to that effect, but does not state the basis for his testimony. Ex. 1003 ¶¶ 338–339. Thus, Mr. Schmandt’s testimony on this point is entitled to little weight. See 37 C.F.R. § 42.65(a) (“Expert testimony that does not disclose the underlying facts or data on which the opinion is based is entitled to little or no weight.”); Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential) (“Dr. Jones does not cite to any additional supporting evidence or provide any technical reasoning to support his statement. Thus, the cited declaration testimony is conclusory and support, and is entitled to little weight.”).” slip op. at 44
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,712,595 - Tableau Software, LLC v. Icharts LLCInstitutedPTAB · May 14, 2025 · IPR2024-01387 · APJ Iftikhar Ahmed · IPR · Institution
Instituted IPR of claims 1–16 on all grounds asserted in the Petition, based on a reasonable likelihood of prevailing on at least one challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“We have authority to determine whether to institute an inter partes review. See 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2022). To institute an inter partes review, we must determine that the information presented in the Petition shows “a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Based on the information presented in the Petition and the supporting evidence, we are persuaded that there is a reasonable likelihood that Petitioner would prevail with respect to at least one of the challenged claims. Accordingly, we institute an inter partes review of the challenged claims on the grounds set forth in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedOther
“Petitioner contends that a person having ordinary skill in the art, would have had a B.S. degree in Computer Science, Computer Engineering, or equivalent experience relating to computing, as well as two to three additional years of academic or industry experience related to web application development and data visualization services. The [person of ordinary skill in the art] would have, therefore, been familiar with client-side scripting technologies, such as JavaScript and/or ActionScript. The [person of ordinary skill in the art] would have further worked as part of a multidisciplinary team and drawn upon not only her own skill but of others on the team, e.g., to solve a given problem. Pet. 4 (citing Ex. 1003 ¶ 70). Patent Owner does not dispute the level of ordinary skill in the art. See Prelim. Resp. 31. We determine, on the current record, that Petitioner’s proposed level of ordinary skill is consistent with the ’892 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d at 1579. We adopt that level of ordinary skill in deciding whether to institute trial.” slip op. at 8
- Expert testimonyPetitioner expert creditedOther
“Mr. Schmandt testifies that a person of ordinary skill in the art “would have understood that the QlikView Manuals disclose interactive charts that retain interactivity when published or embedded . . . also because [such a person] would have known how QlikView was actively being used on different web applications,” including on an online Web Selector Tool. Ex. 1003 ¶¶ 355–359 (citing Exs. 1024–1027). On the other hand, Dr. Miller testifies that “the QlikView clients must establish and maintain a connection to the QlikView Server to display and interact with the QlikView documents given that those documents are hosted on the QlikView Server.” Ex. 2001 ¶ 216. For the purposes of institution, we find Mr. Schmandt’s testimony persuasive because it is consistent with the disclosure of the QlikView Manuals discussed above. In contrast, Dr. Miller’s testimony, like Patent QlikView server to the recited claim limitations.10” slip op. at 21
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundOther
“h) Motivation to Combine the QlikView Manuals Petitioner argues that a person of ordinary skill in the art would have been motivated to combine the QlikView Reference Manual and the QlikView Server Reference Manual because they describe the same product suite and they cross reference one another. Pet. 58 (citing Exs. 1008, 1009; Ex. 1003 ¶¶ 294, 295). Patent Owner does not specifically respond to these arguments. See Prelim. Resp. Based on our review of the current record, at this stage of the proceeding, we determine that Petitioner provides an adequate reason why one of ordinary skill in the art would have combined the teachings of the QlikView Manuals in the manner asserted by Petitioner, with a reasonable expectation of success.” slip op. at 22
§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,271,892 - Apple Inc. v. Proxense, LLCInstitution deniedPTAB · May 2, 2025 · IPR2025-00074 · APJ Thu A Dang · IPR · Institution
The Board denied institution on claims 1–20 because it had already instituted the related IPR2025-00075 and granted joinder to the Google IPR.
RulingsInstitution decision- Parallel petitionsInstitution denied discretionary otherInstitution denied
“Here, Petitioner acknowledges that it “has two concurrent petitions challenging the validity of the same patent,” i.e., the current Petition and the petition in the 0075 IPR. Notice 1. Although Petitioner provides “a ranking of the petitions in the order in which it wishes the Board to consider the merits” and “a succinct explanation of the differences” (id.), according to Petitioner, “[s]hould the Board decide to institute only a single petition and grant only a single motion for joinder against the ’289 patent, Petitioner requests that the Board institute Petitioner’s petition in the 0075 IPR and grant its Motion for Joinder in the Google IPR if the Board institutes that proceeding.” Id. Since, as discussed above, the Board has instituted an inter partes review of the ’289 patent in IPR2025-00075 and granted the Motion for Joinder to the Google IPR, we deny the Petition in the current IPR.” slip op. at 2
Discretionary denialPatents in suitUS 9,679,289 - Microsoft Corporation v. Proxense, LLCAdverse judgmentPTAB · Apr 28, 2025 · IPR2024-00775 · APJ David C Mckone · IPR · Adverse judgment
The Board entered adverse judgment against Patent Owner and cancelled claims 1–17 after Patent Owner conceded unpatentability.
RulingsAdverse judgment- Adverse judgmentAdverse judgmentGranted
“Rule 47.73(b)(3) provides that “[a] party may request adverse judgment against itself at any time during a proceeding” and that “[a]ctions construed to be a request for adverse judgment include . . . [c]oncession of unpatentability . . . of the contested subject matter.” 37 C.F.R. § 42.73(b)(3). We grant Patent Owner’s request for adverse judgment.” slip op. at 2
NonePatents in suitUS 8,352,730
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.