- Juul Labs, Inc. v. Njoy, LLCNo claims unpatentablePTAB · May 21, 2025 · IPR2024-00160 · APJ Kimberly Mcgraw · IPR · Final written decision
The Board held claims 1–48 not shown unpatentable on any of six § 103 grounds because the asserted references did not teach the required housing aperture and the proposed combinations lacked adequate support.
RulingsFinal written decision- Skill levelDecided for patent owner
“time it was made, we consider the level of ordinary skill in the pertinent art at the time of invention. Graham, 383 U.S. at 17. Petitioner does not provide its own definition of the level of ordinary skill in the art. Instead, Petitioner asserts: In previous litigation involving the ’881 patent – the parent patent to the ’864 patent (Fuma International LLC v. R.J. Reynolds Vapor Company, Case No. 1:19-cv-260 (M.D.N.C. 2019)) with an identical specification – Patent Owner’s predecessor-in-interest asserted that a person of ordinary skill in the art (“POSITA”) at the time of the purported invention would have had a mechanical or electrical engineering degree, industrial design degree, or a similar technical degree, or equivalent work experience, and 5 to 10 years of experience in electromechanical devices. Ex. 1007, ¶¶14-17. Pet. 11–12; see also Ex. 1007 ¶ 16 (Mr. Sturges testifying that he meets “that qualification” without affirmatively providing a definition for a POSITA). Before institution, Patent Owner stated it did not challenge this definition (Prelim. Resp. 9), and we adopted Petitioner’s proposed definition in our Decision granting institution. During trial, Patent Owner also adopted this definition. PO Resp. 10–11. Upon a complete record, we see no reason to change and we maintain the agreed upon definition of a POSITA.” slip op. at 12
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“Patent Owner argues, and Petitioner does not dispute, that an aperture is a “hole” or an “opening.” See, e.g., id. at 21; see generally Reply. Patent Owner asserts that, in the proper context, the plain and ordinary meaning of a housing having an aperture is that the aperture is a hole, or an opening, on the housing structure itself. Id. at 21–22. We agree. In order for an object to have an “aperture” or an “opening,” the aperture or opening must be on the structure itself and not on a separate object that is located in the structure. This construction is in accord with the Specification of the ’864 patent, which refers to apertures in context of the structure on which they are located. See, e.g., Ex. 1001, 6:12–18 (referring to a first end comprising a first aperture), 7:11–12, 7:65–67 (stating that the wall of an airflow passageway may have apertures).” slip op. at 18
- Claim Construction › Intrinsic evidence (Phillips canons) › Prosecution history disclaimer / disavowalTerm construed patent owner constructionDecided for patent owner
“large obstructions that force the air flow to near the peripheral surface of the housing, render the passageway non-central. During prosecution of the ’864 patent, the Examiner rejected certain claims (i.e., dependent claims 49, 63, and 75) over Han. To overcome this rejection, the applicant argued that Han cannot meet the limitation “wherein the airflow passageway extends centrally and axially from the first aperture to the second aperture.” Ex. 1002, 273. The applicant explained that Han does not meet this limitation because Han’s shell (b) does not include a central airflow passageway and instead places the perforated component for liquid storage (9) in the middle of shell (b), thereby forcing the airflow around the peripheral surface of the perforated component for liquid storage (9). Id. at 273–274. The examiner relied on this argument in determining that the applicant had overcome an earlier rejection. Id. at 195. Thus, some obstructions of a passageway render the passageway non-central; in particular those obstructions that force air to flow near the peripheral surface of the housing are large enough to render the passageway non-central.” slip op. at 22
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable
“lacks motivation and is plagued by improper hindsight.” Sur-reply 15–17. On the record developed during trial, we agree with Patent Owner that Petitioner has not shown by a preponderance of the evidence that a person of ordinary skill in the art would have had a reason to combine the teachings of Xia with those of Wang to arrive at the claimed limitations. Relying on the testimony of Patent Owner’s declarant Dr. Singhose, Petitioner argues that a person of ordinary skill in the art “would have known a central straight path has less airflow resistance than a circuitous one.” Reply 22 (citing Ex. 1035, 127:15–128:9). But the same witness also testified that higher airflow resistance might be desirable and explained that providing more resistance to airflow might result in improved mixing. Ex. 1035, 21:21–22:12, 127:20–24, 170:10–14. In addition, Dr. Singhose testifies that the complicated design of the airflow passageway in Xia “serves important functions,” including “allow[ing] large droplets to be reabsorbed by the liquid-guiding mechanism,” allowing “excessive liquid in the airflow [to] condense,” and “prevent[ing] the chemical liquid from being sucked into the mouth.” Ex. 2022 ¶ 190 (citing Ex. 1004, 11, 13–14, 16). Although Petitioner’s declarant Dr. Sturges testifies that a straight airflow passageway “would provide improved, smoother air flow,” he does not provide any evidence supporting the view that the air flow would be improved. Ex. 1007 ¶ 144. We credit the testimony of Dr. Singhose that using a straight passageway in Xia would have been detrimental rather than beneficial. Ex. 2022 ¶ 190. slip op. at 40
Patent outcomesUS 11,497,864 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,497,864 - Juul Labs, Inc. v. Njoy, LLCNo claims unpatentablePTAB · May 21, 2025 · IPR2024-00161 · APJ Christopher M Kaiser · IPR · Final written decision
Claims 1–27 were not shown unpatentable because the asserted obviousness grounds failed to establish the claimed central airflow passageway or a reason to combine the references.
RulingsFinal written decision- Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner
“Relying on the testimony of Patent Owner’s declarant Dr. Singhose, Petitioner argues that a person of ordinary skill in the art “would have known a central straight path has less airflow resistance than a circuitous one.” Reply 22–23 (citing Ex. 1035, 127:15–128:9). But the same witness also testified that higher airflow resistance might be desirable and explained that providing more resistance to airflow might result in improved mixing. Ex. 1035, 21:21–22:12, 127:20–24, 170:10–14. In addition, Dr. Singhose testifies that the complicated design of the airflow passageway in Xia “serves important functions,” including “allow[ing] large droplets to be reabsorbed by the liquid-guiding mechanism,” allowing “excessive liquid in the airflow [to] condense,” and “prevent[ing] the chemical liquid from being sucked into the mouth.” Ex. 2022 ¶ 183 (citing Ex. 1004, 11, 13–14, 16). Although Petitioner’s declarant Dr. Sturges testifies that a straight airflow passageway “would provide improved, smoother air flow,” he does not provide any evidence supporting the view that the air flow would be improved. Ex. 1007 ¶ 118. We credit the testimony of Dr. Singhose that using a straight passageway in Xia would have been detrimental rather than beneficial. Ex. 2022 ¶ 183. Petitioner also argues that the inventors’ use of a straight path is evidence that the use of a straight passageway was “merely common-sense obviousness.” Reply 22–23. This is hindsight. Otsuka Pharm. Co. v. Sandoz, Inc., 678 F.3d 1280, 1296 (Fed. Cir. 2012) (“The inventor’s own path itself never leads to a conclusion of obviousness; that is hindsight.”). Moreover, it does not address the testimony of Dr. Singhose that the use of a complicated passageway like that in Xia had benefits not present in a straight central passageway.” slip op. at 29
- Skill levelSkill level petitioner adoptedOther
“B. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art (“POSITA”) “would have had a mechanical or electrical engineering degree, industrial design degree, or a similar technical degree, or equivalent work experience, and 5 to 10 years of experience in electromechanical devices.” Pet. 10 (citing Ex. 1007 ¶ 16). Prior to institution, Patent Owner stated that, for “the limited purpose of this Preliminary Response,” it “does not challenge the definition of a POSITA set forth in the Petition.” Prelim. Resp. 9. We adopted Petitioner’s proposed definition in our Decision granting institution. During trial, neither party disputed this definition. Upon a complete record, we see no reason to change the adopted definition.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“Patent Owner argues, however, that this presumption is overcome in the present case, and we agree. PO Resp. 28–32. We note that, although the claims require the first aperture to be “on the first end,” the claims still require that the “housing hav[e] a first aperture.” Thus, the issue is whether the aperture must be on the housing itself or part of the housing, as well as whether the aperture is on the first end of the housing. Although “having” and “includes” are used with respect to the solution holding medium to refer to elements located inside the housing, the specification of the ’881 patent suggests that the ends of the housing are part of the housing itself, rather than located inside the housing. First, “the first end . . . can be integrated into a single assembly as part of the housing.” Ex. 1001, 6:16–17. Second, “the housing . . . may comprise the cylindrical wall and two end-caps,” or “the housing . . . may comprise the cartridge wall and a single end-cap.” Id. at 3:55–59. The only figures of the ’881 patent that depict first end 206 show it at the end of the housing rather than located within the interior of housing 202. Id. at Figs. 2, 3. Moreover, there is no requirement to construe a claim term uniformly across multiple uses in the claims when doing so would be nonsensical. Microprocessor Enhancement Corp. v. Texas Instruments, Inc., 520 F.3d 1367, 1375 (Fed. Cir. 2008). Here, construing a first element that is recited as “having” or “includ[ing]” a second element always as encompassing not only second elements that are part of the first element, but also second elements that are located within the interior of the first element, would lead to nonsensical results. Claim 2 recites an airflow passageway “having a length having a circular cross section.” Ex. 1001, 17:59–60. It would be nonsensical to interpret this claim as encompassing an airflow passageway of non-circular cross section that contains another object that has a circular cross section, and neither party argues in favor of such a reading. Similarly, claim 16 recites an “airflow passageway having an interior having a uniform cross-sectional area,” and there is no reason to interpret this claim as encompassing an airflow passageway of non-uniform cross-sectional area that contains another object that itself has uniform cross-sectional area. Id. at 19:47–48. Thus, the claims do not use “having” or “includes” consistently to refer to elements located within the interior of an object; instead, they sometimes use these terms to refer to elements that are a part of an object. See Epcon Gas Sys., Inc. v. Bauer Compressors, Inc., 279 F.3d 1022, 1030–31 (Fed. Cir. 2002) (terms should be construed based on the context of how the terms are used in the claims).” slip op. at 13
- Prior constructionPrior construction not adoptedDecided for patent owner
“When we instituted trial, we preliminarily construed this phrase to encompass apertures that are located within the first end of the housing, determining on the record available at that time that “[t]he term does not require that the first aperture be located in the housing itself.” Inst. Dec. 16. We invited the parties to “address [the] construction of this term during trial,” id., and, on the full record developed during trial, we reach a different conclusion.” slip op. at 10
Patent outcomesUS 10,334,881 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,334,881 - Inergy Technology, Inc. v. Force Mos Technology Co., Ltd.Some claims unpatentablePTAB · May 16, 2025 · IPR2024-00094 · APJ Mary C Hoffman · IPR · Final written decision
Claims 1 and 3–5 are unpatentable over Kobayashi and Hshieh; claims 2 and 6 were not shown unpatentable over the asserted combinations.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner asserts that a person of ordinary skill in the art (“POSITA”), “at the filing date of the ’409 [p]atent[,] would have a master’s degree in electrical engineering, and at least two years of relevant work experience in the field of integrated circuit design and manufacturing.” Pet. 13 (citing Ex. 1003 ¶ 52). Patent Owner does not dispute Petitioner’s proffered level of ordinary skill in the art. PO Resp. 9 (citing Ex. 2021 ¶ 55). We adopt Petitioner’s proffered level of ordinary skill in the art, which is supported by unopposed declaration testimony and consistent with the ’409 patent and prior art of record. See, e.g., Ex. 1001, 1:6–3:8 (describing the invention and related art in terms of integrated circuit design and fabrication). Neither party, moreover, indicates the overall result would change based on a different definition.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner
“Based on the arguments and evidence, we disagree with Petitioner’s proposed construction requiring the corners to be rounded via a particular process, because doing so would improperly import a process of manufacture from the Specification into apparatus claims. See Cont’l Circuits LLC v. Intel Corp., 915 F.3d 788, 799 (Fed. Cir. 2019) (explaining that, generally, a novel product that meets the criteria of patentability is not limited to the process by which it was made, however, process steps can be treated as part of a product claim if the patentee has made clear that the process steps are an essential part of the claimed invention). Here, the portions of the Specification relied on by Petitioner (Ex. 1001, 2:10–20, 4:53–64) disclose a process for manufacturing but do not make clear that the process is an essential part of the claimed invention. We also disagree with Petitioner’s assessment of the prosecution history, i.e., that the claims were amended to distinguish the claimed rounded corners from Pfirsch’s rounded corners, which, presumably, are formed as an incidental result of lithography. On the contrary, the Examiner found (and Patent Owner acknowledged) that Pfirsch has rounded corners. Ex. 1002, 276, 295, 302. As Patent Owner correctly points out, the claims were amended during prosecution to include a “circular” contact to distinguish over Pfirsch’s square contact. See id. Petitioner does not otherwise point to evidence that Patent Owner clearly and unmistakably limited the claim scope to rounded corners formed by a particular process.” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“is ‘known’ is not sufficient for a motivation to combine.” PO Resp. 47. However, the motivation-to-combine analysis is a flexible one, and the “known-technique” rationale is adequate to show a motivation to combine. For example, “if a technique has been used to improve one device, and a person of ordinary skill in the art would recognize that it would improve similar devices in the same way, using the technique is obvious unless its actual application is beyond his or her skill.” KSR, 550 U.S. at 417; see also Intel Corp. v. PACT XPP Schweiz AG, 61 F.4th 1373, 1380 (Fed. Cir. 2023) (quoting Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 799–800 (Fed. Cir. 2021) (“If there’s a known technique to address a known problem using ‘prior art elements according to their established functions,’ then there is a motivation to combine.”). Here, as discussed above, the record shows that top view rounding was a known technique to eliminate corners, and that corners were a known problem (e.g., corners tend to reach undesirable higher peak electric field leading to premature breakdown voltage). See, e.g., Ex. 1003 ¶¶ 37, 39, 42– 44, 55–57, 122, 133, 135–141; Ex. 1005, 7:57–8:4; Ex. 1006, 1:18–21, 2:19–39, 5:3–17, Figs. 6A–8B; Ex. 1011, 1:29–41; Ex. 1012; PO Resp. 13, 46 (citing Ex. 1011, 1:34–40); Ex. 2021 ¶ 87. Furthermore, there is no dispute that modifying Kobayashi to eliminate corners via top view rounding was anything more than a “minor and commonplace modification” of cell shape within the skill of an ordinary artisan, or that top view rounding would change Kobayashi’s established function. Pet. 60; Ex. 2021 ¶ 86.” slip op. at 30
- Obviousness (§103) › KSR rationalesMotivation foundUnpatentable
“We agree that Kobayashi’ s Figure 5A solely cannot be relied upon as disclosing the claimed diameter. See Hockerson-Halbertstadt, Inc. v. Avia Group Int'l, 222 F.3d 951, 956 (Fed. Cir. 2000) (patent drawings not designated as being drawn to scale cannot be relied upon to define precise proportions of elements if the specification is completely silent on the issue). However, we do not agree that Petitioner failed to show Kobayashi suggests the recited diameter. We disagree with Patent Owner’s assertion that Dr. Liu’s “vague, purported ‘design considerations’” are “unsupported.” PO Resp. 43. Although Kobayashi is silent on the width/diameter of the trench contact in Figure 5A, Kobayashi discloses trenched gates having dimensions below 0.5 μm, which demonstrates that it was known in the art, and required no more than an exercise of ordinary skill in the art, to create trenched features of widths well below 1 μm. Kobayashi also discloses that the width of each trench, and the distance between the adjacent trenches (which includes the trench contact), must be selected to optimum sizes . . . [and] these sizes . . . have some degrees of freedom.” Ex. 1005, 7:42–48. This demonstrates a POSITA would seek to optimize trench contact width or diameter. Dr. Liu’s testimony regarding design considerations suggests the desirability of a reduced diameter trench contact, e.g., to minimize the width of the trench contact for purposes of easier filling, to minimize the total width of the unit cell, and to minimize manufacturing time by reducing etch back time. See Ex. 1003 ¶¶ 111–114. As Patent Owner acknowledges, “there is always a motivation to speed up the fabrication process or shrink feature sizes of semiconductors.” PO Resp. 43 (citing 2021 ¶ 131). However, contrary to Patent Owner’s arguments, these are not generic motivations “untethered” from Kobayashi. Id. Indeed, Kobayashi directly addresses the fabrication process (including new techniques to obtain trench widths under 0.5 μm) and the need to optimize the size of trench gates and the space in between (which includes the trench contact). Ex. 1005, 7:43–54, 7:19–9:53. Patent Owner also argues that Petitioner presents no evidence that modifying Kobayashi to have a diameter smaller than 1 μm is predictable. PO Resp. 44. We disagree. As discussed above, Petitioner points to Kobayashi’s teachings that the sizes are to be optimized and that the trench gate width is smaller than 0.5 μm, which suggests making other trench features of that width was within ordinary skill. Ex. 1003 ¶ 112. Furthermore, Kobayashi’s silence as to the dimensions of the trench contact suggests that the trench contact diameter dimension is likely in the ballpark of the other explicitly disclosed trenched feature dimensions and is a matter of routine optimization. In addition, Patent Owner advances no persuasive evidence that the claimed diameter produces unexpected results or is otherwise critical. Patent Owner also argues that reducing trench contact diameter has downsides (i.e., reduced ease of filling for metal plugs and reduced current carrying capacity) not addressed by Petitioner; however, Petitioner is not required to address those tradeoffs in its Petition, and we do not see how those tradeoffs would prevent the proposed combination. PO Resp. 44; see Medichem, S.A. v. Rolabo, S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006) (“a given course of action often has simultaneous advantages and disadvantages, and this does not necessarily obviate motivation to combine.”); Winner Int'l Royalty Corp. v. Wang, 202 F.3d 1340, 1349 n.8 (Fed. Cir. 2000) (“The fact that the motivating benefit comes at the expense of another benefit, however, should not nullify its use as a basis to modify the disclosure of one reference with the teachings of another. Instead, the benefits, both lost and gained, should be weighed against one another.”). Here, Dr. Liu listed numerous benefits of having a reduced diameter, which weigh against the potential downsides raised by Patent Owner. Ex. 1003 ¶¶ 111–114. Moreover, we do not see how the downsides/tradeoffs prevent modifying Kobayashi in the manner suggested when the same tradeoffs appear to be applicable to the ’409 patent. Having considered Patent Owner’s arguments, and taking into” slip op. at 43
Patent outcomesUS 7,812,409 mixedClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,812,409 - Inergy Technology, Inc. v. Force Mos Technology Co., Ltd.No claims unpatentablePTAB · May 16, 2025 · IPR2024-00093 · APJ Grace Karaffa Obermann · IPR · Final written decision
Claims 1–9 were not proven unpatentable because the asserted references did not establish the claimed epitaxial layer or the required coverage of the trench sidewalls.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner defines a person of ordinary skill in the art as having “a Master’s degree in electrical engineering, and at least two years of relevant work experience in the field of integrated circuit design and manufacturing.” Pet. 13 (citing Ex. 1003 ¶¶ 32–37, 57). Patent Owner does not dispute Petitioner’s definition. PO Resp. 6. We adopt Petitioner’s proposed definition of the level of ordinary skill in the art because it is supported by unopposed declaration testimony and appears to be consistent with the disclosures of the ’634 patent and the asserted prior art references. See Ex. 1001, 1:6–2:33 (describing the invention and related art in terms of integrated circuit design and fabrication); see also Ex. 1006 ¶¶ 1–6 (Hirler); Ex. 1008 ¶¶ 1–37 (Kobayashi); Ex. 1009 ¶¶ 2–29 (Shiraishi). Neither party, moreover, indicates the overall result would change based on a different definition.” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“Petitioner argues that “the sidewalls of said trenches in said base layer are covered” should be construed to mean that “the entire sidewalls of” those trenches are covered. Pet. 18–19. We refer to this as “the sidewall limitation.” Petitioner shows persuasively that the disclosure and file history of the ’634 patent support its position on the sidewall limitation. Id. Patent Owner, for its part, observes that, after the filing of the Petition. two District Courts adopted the construction proposed by Petitioner.” PO Resp. 21 (citing Ex. 2010, 6–9; Ex. 2011, 23). Patent Owner also agrees to apply Petitioner’s construction for purposes of this proceeding. Id. We agree with Patent Owner that an express construction of the sidewall limitation is necessary to this Decision, id., and adopt Petitioner’s undisputed definition because it is supported by the record. No other claim term requires express construction for purposes of this Decision.” slip op. at 8
- BurdenNot shown unpatentable
“On this record, Petitioner fails to demonstrate that any claim is unpatentable under any ground asserted in the Petition. IV. CONCLUSION For the above reasons, we determine that Petitioner fails to establish by a preponderance of the evidence that claims 1–9 of the ’634 patent are unpatentable.” slip op. at 34
- Expert testimonyPetitioner expert discountedPatent owner expert creditedDecided for patent owner
“Alternatively, even if we set aside that timing issue, Dr. Liu’s bare opinion, advanced for the first time during cross-examination, that an epitaxial layer is “obvious” from Hirler’s disclosure is inadequate to support the challenges. Id. at 24–25. We accord little weight to Dr. Liu’s opinion because it is conclusory. See Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential). In any event, Petitioner does not meet, on this record, the “high standard” required to establish an inherent disclosure of an epitaxial layer in Hirler. PO Resp. 24.6 Dr. Liu opined for the first time during cross-examination “that it would have been impossible to create Hirler’s more lightly doped n- drift zone layer on top of its more heavily doped n+ substrate layer other than via epitaxy.” Id. at 25 (citing Ex. 2014, 164:16– 165:20). But Patent Owner effectively refutes that proposition with evidence that such a layer “could be created by counter-doping,” even if, as Dr. Liu contends, counter-doping may have been less ideal due to “disadvantageous mobility.” Id. (citing Ex. 2012 ¶ 133; Ex. 2014, 166:15–167:8).” slip op. at 11
Patent outcomesUS 7,629,634 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,629,634 - Innoscience America, Inc. v. Infineon Technologies Americas Corp.Institution deniedPTAB · May 16, 2025 · IPR2025-00010 · APJ Michelle N Wormmeester · IPR · Institution
The Board denied institution of IPR challenging claims 1–14, exercising § 314(a) discretion under Fintiv because the balance of factors favored denial.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“2. Factor 2: ITC Final Determination Date Fintiv provides that an ITC trial date that is earlier than the Board’s projected statutory deadline for a final written decision may favor discretionary denial if the ITC is going to decide the same or substantially similar issues to those presented in the petition. Fintiv, Paper 11 at 8. The Guidance Memo further provides that “the Board is more likely to deny institution where the ITC’s projected final determination date is earlier than the Board’s deadline to issue a final written decision.” Guidance Memo 2. Here, the ITC has set the target date for its final determination to March 2, 2026. Ex. 2010, 3 (ITC Order Amending the Procedural Schedule). Our final written decision would be due almost three months later, in late May 2026, should we institute inter partes review.” slip op. at 8
Discretionary denialPatents in suitUS 9,070,755 - Cipla Limited v. Gilead Sciences, Inc.Institution deniedPTAB · May 15, 2025 · IPR2025-00033 · APJ Susan L C Mitchell · IPR · Institution
The Board denied institution of IPR on claims 1–13 under § 314(a), finding the Fintiv factors favored denial and the petition did not present compelling merits.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Institution denied fintivDenied
“We determine that this factor weighs heavily in favor of exercising discretion to deny the Petition. The trial date in the district court litigation is scheduled for October 6, 2025. See Prelim. Resp. 16 (citing Ex. 2010). This date is at least six months before our projected statutory deadline should we go forward in this case. Patent Owner points out that this trial date is nine months later than the median time to trial in the District of Delaware, and in Patent Owner’s view, the parties are on track to satisfy the current schedule. Id. at 16–17 (citing Ex. 2011).” slip op. at 9
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsNot reached
“1 Patent Owner also asserts that the Petition should be denied under 35 U.S.C. § 325(d), but we need not reach this issue because we are exercising discretion under Section 314(a) to deny the Petition. See Prelim. Resp. 2–3.” slip op. at 2
Discretionary denialPatents in suitUS 11,744,802 - Cargill, Incorporated v. Bunge Loders Croklaan USA, LLCRehearing deniedPTAB · Apr 29, 2025 · IPR2024-01360 · APJ Debra L Dennett · IPR · Rehearing
The Board denied Cargill’s rehearing request, leaving institution denied for claims 1, 6–9, and 11–24 because the petition did not show a reason to combine the selected prior-art data without hindsight.
RulingsRehearing decision- RehearingRehearing, deniedDenied
“Upon request for rehearing, we assess a decision on institution “for an abuse of discretion” (37 C.F.R. § 42.71(c) (2020)), which occurs when a “decision was based on an erroneous conclusion of law,” “clearly erroneous factual findings,” or “a clear error of judgment.” PPG Indus. Inc. v. Celanese Polymer Specialties Co., 840 F.2d 1565, 1567 (Fed. Cir. 1988) (citations omitted). The burden of showing a decision should be modified lies with the party challenging the decision. 37 C.F.R. § 42.71(c) (2020). The request must specifically identify all matters the party believes the Board misapprehended or overlooked, and the place where each matter was previously addressed in a motion, an opposition, or a reply. Id. Thus, a request for rehearing is not an opportunity merely to disagree with the Board’s assessment of the arguments or weighing of the evidence, or to present new arguments or evidence. We have reviewed Petitioner’s Rehearing Request and carefully considered all the arguments presented. For the following reasons, we are not persuaded that we misapprehended or overlooked any arguments or evidence.” slip op. at 2
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“As discussed in the Decision, “obviousness concerns whether a skilled artisan not only could have made but would have been motivated to make the combinations or modifications of prior art to arrive at the claimed invention.” Belden Inc. v. Berk-Tek LLC, 805 F.3d 1064, 1073 (Fed. Cir. 2015) (citing InTouch Technologies, Inc. v. VGO Communications, Inc., 751 F.3d 1327, 1352 (Fed. Cir. 2014)). No matter the result of combining the allegedly “readily available and well-known” information taken from particular examples from the “documentary evidence” with Petrauskaite’s disclosure, a POSITA had to have been motivated to do so at the time the invention was made.1 What is missing from the Petition is the “why.” The only motivating force in this case appears to be hindsight spurring Petitioner on to choose particular examples of palm stearin disclosed in Deffense and the soybean oil in Neff in order to justify its assertion that Petrauskaite discloses the claimed wt% ranges of triglyceride classes.” slip op. at 4
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation not foundNot shown unpatentableNot shown unpatentable
“artisan not only could have made but would have been motivated to make the combinations or modifications of prior art to arrive at the claimed invention.” Belden Inc. v. Berk-Tek LLC, 805 F.3d 1064, 1073 (Fed. Cir. 2015) (citing InTouch Technologies, Inc. v. VGO Communications, Inc., 751 F.3d 1327, 1352 (Fed. Cir. 2014)). No matter the result of combining the allegedly “readily available and well-known” information taken from particular examples from the “documentary evidence” with Petrauskaite’s disclosure, a POSITA had to have been motivated to do so at the time the invention was made.1 What is missing from the Petition is the “why.” The only motivating force in this case appears to be hindsight spurring Petitioner on to choose particular examples of palm stearin disclosed in Deffense and the soybean oil in Neff in order to justify its assertion that Petrauskaite discloses the claimed wt% ranges of triglyceride classes.” slip op. at 4
- Strike new argumentNew argument disregardedDecided for patent owner
“Petitioner’s. We find no instance in the Petition in which “motivation” and “iodine value” are discussed together or linked in any way. The same can be said of Dr. Marangoni’s declaration. And, as noted in the Decision, it was not until the Preliminary Reply that Petitioner argued that specific data on fatty acid wt% used for the conversion calculations were selected to represent “knowledge generally available to one of ordinary skill in the art” due to similarity of the iodine value (“IV”) of the palm stearin (and soybean oil) disclosed in Petrauskaite. See Prelim. Reply 2–3. New evidence or argument in the Preliminary Reply that could have presented earlier is not permitted. On this record, we find Petitioner relies its Rehearing Request on arguments about a motivation to combine, stemming from the significance of iodine values, that were not raised in the Petition. Accordingly, Petitioner fails to support that the Decision misapprehended or overlooked arguments in the Petition about the significance of iodine values.” slip op. at 8
§ 103 obviousnesscites KSR · GrahamPatents in suitUS 7,645,473 - Lam Research Corp. v. Inpria Corp.All claims unpatentablePTAB · Apr 18, 2025 · IPR2024-00033 · APJ Grace Karaffa Obermann · IPR · Final written decision
Claims 1–12 are unpatentable as anticipated by the ’888 Publication; Patent Owner’s motion to add substitute claims 13–23 is granted.
RulingsFinal written decision- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportDecided for petitioner
“priority issue are based on the cited disclosures of the ’867 application discussed above. Ex. 2009 ¶ 29. For the reasons discussed above, we do not view the cited disclosures as sufficiently supporting Dr. Banerjee’s conclusion that the ’867 application provides support for claim 1’s average thickness range (id.) and, therefore, give this testimony little weight. Stated somewhat differently, Dr. Banerjee’s advances an opinion (really a legal one) that is not supported by the facts and not in line with the caselaw discussed in this section (such as RAI).” slip op. at 26
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityReference is prior artPrinted publication establishedDecided for petitioner
“priority issue are based on the cited disclosures of the ’867 application discussed above. Ex. 2009 ¶ 29. For the reasons discussed above, we do not view the cited disclosures as sufficiently supporting Dr. Banerjee’s conclusion that the ’867 application provides support for claim 1’s average thickness range (id.) and, therefore, give this testimony little weight. Stated somewhat differently, Dr. Banerjee’s advances an opinion (really a legal one) that is not supported by the facts and not in line with the caselaw discussed in this section (such as RAI).” slip op. at 26
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“d) Conclusion For the reasons discussed above, Petitioner has demonstrated by a” slip op. at 30
- PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend, grantedGranted
“For these reasons, Patent Owner has met its burden to show by a” slip op. at 34
Patent outcomesUS 9,823,564 unpatentable§ 102 anticipationcites Phillips · KSR · Graham · NautilusPatents in suitUS 9,823,564 - Jiangsu Favored Nanotechnology Co., Ltd. v. P2i Ltd.All claims unpatentablePTAB · Apr 11, 2025 · IPR2024-00380 · APJ Sheldon M Mcgee · IPR · Final written decision
Claims 1–5, 7, and 9–14 are unpatentable as obvious over Cohen and Legein or Francesch and Legein; Petitioner’s motion to strike is denied as moot.
RulingsFinal written decision- Skill levelSkill level board ownDecided for petitioner
“The parties agree that a person of ordinary skill in the art in the field of the ’087 patent in June 20154 “would have had at least a bachelor’s degree in a field such as chemistry, physics, or chemical engineering, as well as at least two years of experience with plasma-polymerization techniques.” Pet. 20 (citing Ex. 1002 ¶¶ 22–29); PO Resp. 13 (Patent Owner stating that it “does not dispute this characterization of the level of ordinary skill in the art.”); see also PO Sur-reply 1–2 (noting both parties’ agreement on the education and experience level of the ordinarily skilled artisan).” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“On the fully developed trial record, we determine that no claims need an express construction. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Ltd., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 9
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“Because of Patent Owner’s shifting definitions of the education and experience level of the ordinarily skilled artisan, it is unclear on the complete record what precise definition Patent Owner and Dr. Senkevitch are applying when arguing the skilled artisan’s capabilities. PO Resp. 13, 22–27, 31–32, 34–40; PO Sur-reply 1–6, 11–13; Ex. 2007 ¶¶ 30, 31, 33, 34, 37, 40, 52–55, 60, 68, 74, 76, 77, 80–86, 89, 91, 94, 95, 100, 102–105, 108, 110, 111, 113–116, 118–120, 122, 124, 127–134. We, therefore, give Dr. Senkevitch’s testimony regarding the capabilities of a person of ordinary skill in the art minimal weight, which leaves us with Patent Owner’s insufficiently supported arguments regarding the skilled artisan’s capabilities. PO Resp. 13, 22–27, 31–32, 34–40; PO Sur-reply 1–6, 11–13. Moreover, as Petitioner correctly points out, the ʼ087 patent expressly teaches that the precise conditions for forming a protective polymeric coating “will vary depending upon factors such as, without limitation, the nature of the monomer compound, the crosslinking agent, the substrate, as well as the desired properties of the coating” and that such “conditions can be determined using routine methods.” Ex. 1001 15:1–15:5 (emphasis added); Pet. Reply 17. Where the patent itself leaves to the judgment of an ordinarily skilled artisan the assessment of these factors to ascertain suitable conditions for forming the protective coating, we find persuasive Petitioner’s view that it would have been well within the level of ordinary skill to ascertain such suitable conditions.” slip op. at 20
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“We disagree with Patent Owner. Although the claims of the ʼ087 patent recite obtaining the protective cross-linked polymeric coating “by exposing the device or component to a plasma,” the field of endeavor analysis in an analogous art inquiry does not exclusively turn on the claims at issue, but rather takes account of the entirety of a patent’s disclosure. See In re Bigio, 381 F.3d 1320, 1326 (Fed. Cir. 2004) (explaining that “the PTO must show adequate support for its findings on the scope of the field of endeavor in the application’s written description and claims” (emphasis added)); In re Mettke, 570 F.3d 1356, 1359 (Fed. Cir. 2009) (rejecting an argument that the field of endeavor was limited to a claimed “Internet terminal” when “the specification describes various communication media, including facsimile machines and email, as related to the invention.”). This is significant here because the ʼ087 patent discloses that “[t]he … invention relates to protective coatings” and specifically “relates to protective coatings for electronic or electrical devices and components thereof, and methods of forming such coatings.” Ex. 1001, 1:14–17. Based on this disclosure, we find that the ʼ087 patent’s field of endeavor relates to “protective coatings for electronic or electrical devices and components thereof” broadly, not just those formed on such devices or components via a plasma polymerization process as asserted by Patent Owner. Id. Although Cohen does not explicitly disclose that its crosslinked polymers constitute a “protective coating,” Cohen does disclose that its “copolymerizable mixture can be cast into films” (Ex. 1004, 2:61–62), that the polymerization can “effected in situ,” and that the polymers may be used in “numerous” electrical applications (id. at 5:17–25). Tr. 8:9–10:2, 27:2– 21; see Pet. Reply 5 (explaining how “Cohen described insulating polymers that could be applied as films and be used to protect substrates including cables and electrical coils.” (citing Ex. 1004, 2:60–63, 5:13–25)). These disclosures suggest strongly that Cohen’s crosslinked polymers––if cast into a film or formed in situ on an electrical device or component––would serve as a protective coating on that electrical device or component, even though Cohen does not expressly refer to its crosslinked polymers ipsis verbis as a “protective coating.” Thus, we find that Cohen is within the field of endeavor of the ʼ087 patent.” slip op. at 15
Patent outcomesUS 11,041,087 unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,041,087 - PTAB · Mar 27, 2025 · IPR2024-01451 · APJ Erica A Franklin · IPR · Institution
The Board instituted review of claims 1–19 on all petition grounds, finding a reasonable likelihood that claim 1 would have been obvious over Larson alone.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“of whether we exercise our discretion to deny institution under 35 U.S.C. § 314(a). Rather, when considering the Fintiv factors, we “take[] a holistic view of whether efficiency and integrity of the system are best served by denying or instituting review.” Fintiv at 6. Here, factors one and six are neutral, factors two and three weigh against discretionary denial, and factors four and five favor denial. We assign less weight to the existence of an overlap in asserted claims and prior art, in view of there being no trial date scheduled in the District Court case and no persuasive evidence that the court’s trial date would be expected to be significantly before the due date of our Final Written Decision. Therefore, after weighing all of the factors, we determine that the facts in this case that weigh against exercising discretion outweigh the facts that favor exercising discretion. Accordingly, we decline to exercise our discretion to deny institution under § 314(a).” slip op. at 13
- Skill levelSkill level petitioner adoptedDecided for petitioner
“At this stage in the proceeding, Patent Owner does not dispute Petitioner’s description of the person of ordinary skill in the art. Prelim. Resp. 27. In view of this, and because Petitioner’s uncontested description of one of ordinary skill in the art is reasonable and consistent with the ’921 patent and the cited art, we adopt Petitioner’s definition for purposes of this Decision. We note, however, that the open-ended language “at least” expands the range of experience indefinitely with no upper bound. Therefore, we do not apply this aspect of Petitioner’s formulation.” slip op. at 14
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“We determine that there is no need to expressly construe any claim term to determine whether to institute an inter partes review. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). To the extent that any discussion regarding the scope of a claim term is relevant to our decision, we address that issue in our analysis of the asserted grounds of unpatentability.” slip op. at 15
- Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference not prior artDecided for patent owner
“Owner that Petitioner has not demonstrated sufficiently in the Petition, for purposes of institution, that all of the portions of Saxonov relied upon in the Petition are prior art. In particular, we determine that Petitioner has not established that the disputed portions of Saxonov are entitled to claim the benefit of the ’013 provisional filing date because Petitioner has failed to satisfy the second condition for this benefit, i.e., by showing that the provisional application provides sufficient support for certain subject matter in Saxonov relied upon for prior art purposes in the Petition.” slip op. at 28
Claim construction§ 102 anticipation§ 103 obviousnessDiscretionary denialcites Phillips · GrahamPatents in suitUS 11,827,921
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.