PTAB
Advanced fields
667 decisions · 465msnewest first
  • PTAB · May 20, 2025 · IPR2025-00120 · APJ Jason W Melvin · IPR · Institution

    The Board instituted IPR of claims 1–4 because Petitioner showed a reasonable likelihood that Acharya renders at least one challenged claim obvious.

    RulingsInstitution decision
    • PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied

      “asserted in the Texas litigation. Prelim. Resp. 14. Petitioner stipulates not to pursue in the Texas litigation “the same grounds or any grounds that could have reasonably been raised before the PTAB.” Pet. 68. Such a Sotera stipulation eliminates the substantive overlap between this proceeding and invalidity in the Texas litigation. See Sotera Wireless, Inc. v. Masimo Corp., IPR2020-01019, Paper 12 at 18–19 (PTAB Dec. 1, 2020) (precedential as to § II.A). This factor weighs strongly against discretionary denial.” slip op. at 8

    • PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDenied

      “Petitioner points out differences between Acharya and Robbins, in that Robbins discloses Internet Protocol Television (IPTV) media distribution, whereas Acharya discloses a system for multiple users in a meeting to display media on a single display. Prelim. Reply 2. Petitioner asserts further that Robbins lacks the claimed communication path that bypasses the router, which is disclosed by Acharya. Id. at 2–3. And Petitioner points out that Acharya describes “the user’s ability to disconnect from the display and pass control to another participant—key to the ‘termination signal’ limitation.” Id. at 3.” slip op. at 10

    • Skill levelSkill level petitioner adoptedOther

      “educational background, such as a Bachelor of Science degree, in Electrical Engineering or Computer Engineering as well as some understanding of Wireless Communications” and “would have 2 years of practical experience in television or video display system development.” Pet. 12 (citing Ex. 1003 ¶¶ 50–51). Patent Owner adopts that proposed level of skill in the art. Prelim. Resp. 5–6. Petitioner’s proposed definition appears reasonable and consistent with the asserted prior art and the ’341 patent, and we adopt it here.” slip op. at 11

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “We follow the parties’ agreed construction here, as adopted by the district court. Neither that construction nor any other affects our decision. Thus we do not expressly construe any claim term. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms that . . . are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). To the extent that the scope of a particular claim term impacts a party’s argument during trial, the party should propose an express construction and show how the record supports it.” slip op. at 12

    Claim construction§ 103 obviousnessDiscretionary denial
    Patents in suitUS 10,375,341
  • PTAB · May 16, 2025 · IPR2024-00094 · APJ Mary C Hoffman · IPR · Final written decision

    Claims 1 and 3–5 are unpatentable over Kobayashi and Hshieh; claims 2 and 6 were not shown unpatentable over the asserted combinations.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “Petitioner asserts that a person of ordinary skill in the art (“POSITA”), “at the filing date of the ’409 [p]atent[,] would have a master’s degree in electrical engineering, and at least two years of relevant work experience in the field of integrated circuit design and manufacturing.” Pet. 13 (citing Ex. 1003 ¶ 52). Patent Owner does not dispute Petitioner’s proffered level of ordinary skill in the art. PO Resp. 9 (citing Ex. 2021 ¶ 55). We adopt Petitioner’s proffered level of ordinary skill in the art, which is supported by unopposed declaration testimony and consistent with the ’409 patent and prior art of record. See, e.g., Ex. 1001, 1:6–3:8 (describing the invention and related art in terms of integrated circuit design and fabrication). Neither party, moreover, indicates the overall result would change based on a different definition.” slip op. at 10

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner

      “Based on the arguments and evidence, we disagree with Petitioner’s proposed construction requiring the corners to be rounded via a particular process, because doing so would improperly import a process of manufacture from the Specification into apparatus claims. See Cont’l Circuits LLC v. Intel Corp., 915 F.3d 788, 799 (Fed. Cir. 2019) (explaining that, generally, a novel product that meets the criteria of patentability is not limited to the process by which it was made, however, process steps can be treated as part of a product claim if the patentee has made clear that the process steps are an essential part of the claimed invention). Here, the portions of the Specification relied on by Petitioner (Ex. 1001, 2:10–20, 4:53–64) disclose a process for manufacturing but do not make clear that the process is an essential part of the claimed invention. We also disagree with Petitioner’s assessment of the prosecution history, i.e., that the claims were amended to distinguish the claimed rounded corners from Pfirsch’s rounded corners, which, presumably, are formed as an incidental result of lithography. On the contrary, the Examiner found (and Patent Owner acknowledged) that Pfirsch has rounded corners. Ex. 1002, 276, 295, 302. As Patent Owner correctly points out, the claims were amended during prosecution to include a “circular” contact to distinguish over Pfirsch’s square contact. See id. Petitioner does not otherwise point to evidence that Patent Owner clearly and unmistakably limited the claim scope to rounded corners formed by a particular process.” slip op. at 12

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

      “is ‘known’ is not sufficient for a motivation to combine.” PO Resp. 47. However, the motivation-to-combine analysis is a flexible one, and the “known-technique” rationale is adequate to show a motivation to combine. For example, “if a technique has been used to improve one device, and a person of ordinary skill in the art would recognize that it would improve similar devices in the same way, using the technique is obvious unless its actual application is beyond his or her skill.” KSR, 550 U.S. at 417; see also Intel Corp. v. PACT XPP Schweiz AG, 61 F.4th 1373, 1380 (Fed. Cir. 2023) (quoting Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 799–800 (Fed. Cir. 2021) (“If there’s a known technique to address a known problem using ‘prior art elements according to their established functions,’ then there is a motivation to combine.”). Here, as discussed above, the record shows that top view rounding was a known technique to eliminate corners, and that corners were a known problem (e.g., corners tend to reach undesirable higher peak electric field leading to premature breakdown voltage). See, e.g., Ex. 1003 ¶¶ 37, 39, 42– 44, 55–57, 122, 133, 135–141; Ex. 1005, 7:57–8:4; Ex. 1006, 1:18–21, 2:19–39, 5:3–17, Figs. 6A–8B; Ex. 1011, 1:29–41; Ex. 1012; PO Resp. 13, 46 (citing Ex. 1011, 1:34–40); Ex. 2021 ¶ 87. Furthermore, there is no dispute that modifying Kobayashi to eliminate corners via top view rounding was anything more than a “minor and commonplace modification” of cell shape within the skill of an ordinary artisan, or that top view rounding would change Kobayashi’s established function. Pet. 60; Ex. 2021 ¶ 86.” slip op. at 30

    • Obviousness (§103) › KSR rationalesMotivation foundUnpatentable

      “We agree that Kobayashi’ s Figure 5A solely cannot be relied upon as disclosing the claimed diameter. See Hockerson-Halbertstadt, Inc. v. Avia Group Int'l, 222 F.3d 951, 956 (Fed. Cir. 2000) (patent drawings not designated as being drawn to scale cannot be relied upon to define precise proportions of elements if the specification is completely silent on the issue). However, we do not agree that Petitioner failed to show Kobayashi suggests the recited diameter. We disagree with Patent Owner’s assertion that Dr. Liu’s “vague, purported ‘design considerations’” are “unsupported.” PO Resp. 43. Although Kobayashi is silent on the width/diameter of the trench contact in Figure 5A, Kobayashi discloses trenched gates having dimensions below 0.5 μm, which demonstrates that it was known in the art, and required no more than an exercise of ordinary skill in the art, to create trenched features of widths well below 1 μm. Kobayashi also discloses that the width of each trench, and the distance between the adjacent trenches (which includes the trench contact), must be selected to optimum sizes . . . [and] these sizes . . . have some degrees of freedom.” Ex. 1005, 7:42–48. This demonstrates a POSITA would seek to optimize trench contact width or diameter. Dr. Liu’s testimony regarding design considerations suggests the desirability of a reduced diameter trench contact, e.g., to minimize the width of the trench contact for purposes of easier filling, to minimize the total width of the unit cell, and to minimize manufacturing time by reducing etch back time. See Ex. 1003 ¶¶ 111–114. As Patent Owner acknowledges, “there is always a motivation to speed up the fabrication process or shrink feature sizes of semiconductors.” PO Resp. 43 (citing 2021 ¶ 131). However, contrary to Patent Owner’s arguments, these are not generic motivations “untethered” from Kobayashi. Id. Indeed, Kobayashi directly addresses the fabrication process (including new techniques to obtain trench widths under 0.5 μm) and the need to optimize the size of trench gates and the space in between (which includes the trench contact). Ex. 1005, 7:43–54, 7:19–9:53. Patent Owner also argues that Petitioner presents no evidence that modifying Kobayashi to have a diameter smaller than 1 μm is predictable. PO Resp. 44. We disagree. As discussed above, Petitioner points to Kobayashi’s teachings that the sizes are to be optimized and that the trench gate width is smaller than 0.5 μm, which suggests making other trench features of that width was within ordinary skill. Ex. 1003 ¶ 112. Furthermore, Kobayashi’s silence as to the dimensions of the trench contact suggests that the trench contact diameter dimension is likely in the ballpark of the other explicitly disclosed trenched feature dimensions and is a matter of routine optimization. In addition, Patent Owner advances no persuasive evidence that the claimed diameter produces unexpected results or is otherwise critical. Patent Owner also argues that reducing trench contact diameter has downsides (i.e., reduced ease of filling for metal plugs and reduced current carrying capacity) not addressed by Petitioner; however, Petitioner is not required to address those tradeoffs in its Petition, and we do not see how those tradeoffs would prevent the proposed combination. PO Resp. 44; see Medichem, S.A. v. Rolabo, S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006) (“a given course of action often has simultaneous advantages and disadvantages, and this does not necessarily obviate motivation to combine.”); Winner Int'l Royalty Corp. v. Wang, 202 F.3d 1340, 1349 n.8 (Fed. Cir. 2000) (“The fact that the motivating benefit comes at the expense of another benefit, however, should not nullify its use as a basis to modify the disclosure of one reference with the teachings of another. Instead, the benefits, both lost and gained, should be weighed against one another.”). Here, Dr. Liu listed numerous benefits of having a reduced diameter, which weigh against the potential downsides raised by Patent Owner. Ex. 1003 ¶¶ 111–114. Moreover, we do not see how the downsides/tradeoffs prevent modifying Kobayashi in the manner suggested when the same tradeoffs appear to be applicable to the ’409 patent. Having considered Patent Owner’s arguments, and taking into” slip op. at 43

    Patent outcomesUS 7,812,409 mixed
    Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 7,812,409
  • PTAB · May 16, 2025 · IPR2024-00093 · APJ Grace Karaffa Obermann · IPR · Final written decision

    Claims 1–9 were not proven unpatentable because the asserted references did not establish the claimed epitaxial layer or the required coverage of the trench sidewalls.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “Petitioner defines a person of ordinary skill in the art as having “a Master’s degree in electrical engineering, and at least two years of relevant work experience in the field of integrated circuit design and manufacturing.” Pet. 13 (citing Ex. 1003 ¶¶ 32–37, 57). Patent Owner does not dispute Petitioner’s definition. PO Resp. 6. We adopt Petitioner’s proposed definition of the level of ordinary skill in the art because it is supported by unopposed declaration testimony and appears to be consistent with the disclosures of the ’634 patent and the asserted prior art references. See Ex. 1001, 1:6–2:33 (describing the invention and related art in terms of integrated circuit design and fabrication); see also Ex. 1006 ¶¶ 1–6 (Hirler); Ex. 1008 ¶¶ 1–37 (Kobayashi); Ex. 1009 ¶¶ 2–29 (Shiraishi). Neither party, moreover, indicates the overall result would change based on a different definition.” slip op. at 7

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

      “Petitioner argues that “the sidewalls of said trenches in said base layer are covered” should be construed to mean that “the entire sidewalls of” those trenches are covered. Pet. 18–19. We refer to this as “the sidewall limitation.” Petitioner shows persuasively that the disclosure and file history of the ’634 patent support its position on the sidewall limitation. Id. Patent Owner, for its part, observes that, after the filing of the Petition. two District Courts adopted the construction proposed by Petitioner.” PO Resp. 21 (citing Ex. 2010, 6–9; Ex. 2011, 23). Patent Owner also agrees to apply Petitioner’s construction for purposes of this proceeding. Id. We agree with Patent Owner that an express construction of the sidewall limitation is necessary to this Decision, id., and adopt Petitioner’s undisputed definition because it is supported by the record. No other claim term requires express construction for purposes of this Decision.” slip op. at 8

    • BurdenNot shown unpatentable

      “On this record, Petitioner fails to demonstrate that any claim is unpatentable under any ground asserted in the Petition. IV. CONCLUSION For the above reasons, we determine that Petitioner fails to establish by a preponderance of the evidence that claims 1–9 of the ’634 patent are unpatentable.” slip op. at 34

    • Expert testimonyPetitioner expert discountedPatent owner expert creditedDecided for patent owner

      “Alternatively, even if we set aside that timing issue, Dr. Liu’s bare opinion, advanced for the first time during cross-examination, that an epitaxial layer is “obvious” from Hirler’s disclosure is inadequate to support the challenges. Id. at 24–25. We accord little weight to Dr. Liu’s opinion because it is conclusory. See Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential). In any event, Petitioner does not meet, on this record, the “high standard” required to establish an inherent disclosure of an epitaxial layer in Hirler. PO Resp. 24.6 Dr. Liu opined for the first time during cross-examination “that it would have been impossible to create Hirler’s more lightly doped n- drift zone layer on top of its more heavily doped n+ substrate layer other than via epitaxy.” Id. at 25 (citing Ex. 2014, 164:16– 165:20). But Patent Owner effectively refutes that proposition with evidence that such a layer “could be created by counter-doping,” even if, as Dr. Liu contends, counter-doping may have been less ideal due to “disadvantageous mobility.” Id. (citing Ex. 2012 ¶ 133; Ex. 2014, 166:15–167:8).” slip op. at 11

    Patent outcomesUS 7,629,634 not shown unpatentable
    Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 7,629,634
  • PTAB · May 16, 2025 · IPR2024-00140 · APJ Christopher L Ogden · IPR · Final written decision

    Claims 1, 7–10, 12–16, 18, and 19 are unpatentable over the stated grounds; claims 4–6 were not shown unpatentable because the proposed multi-coil alignment lacked prior-art support.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “Petitioner argues that a person of ordinary skill in the art “would have had . . . a bachelor’s degree in electrical engineering, microelectronics, or equivalent and . . . two to three years of industry or research experience in the field of wireless energy transfer,” and that “a higher level of education or skill might make up for less experience, and vice-versa.” Pet. 6 (citing Ex. 1003 ¶¶ 39–44). Patent Owner does not contest this. See PO Resp. Petitioner’s proposed articulation is supported by testimonial evidence and appears to be consistent with the types of problems and solutions in the ’654 patent. See Ex. 1001, 1:15–28. We adopt it for this decision.” slip op. at 7

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “We agree with Petitioner that the evidence does not suggest (and Patent Owner does not explicitly argue) that the terms “transmitting antenna” and “receiving” antenna depart from the ordinary and customary meanings of those terms. Pet. 1–2. However, for the reasons discussed below, the outcome of our decision would be the same whether we adopted Petitioner’s or Patent Owner’s proposed construction. Thus, we need not adopt either party’s proposed construction for this decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 9

    • Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for patent owner

      “spaced configuration are not confined to ferrite cores 32 and 3, and that at least a component of the flux lines will escape the cores. See Ex. 1032 ¶¶ 48–52; Ex. 1038 ¶ 54 Fig. 2. Indeed, the evidence suggests (and Dr. Horenstein acknowledges in his first declaration) that at least a component of flux will escape the core of even a traditional transformer. See Ex. 1032 ¶¶ 45–47; Ex. 1044, 6; Ex. 2001 ¶ 27. In his second declaration, Dr. Horenstein provides contrary testimony that in Odachi’s open configuration during alignment, cores 32 and 3 “act to confine or guide the magnetic flux lines, rather than radiate them into free space,” and “the flux lines would [not] leave the gap area and enter into the space distal to the magnetic circuit.” Ex. 2010 ¶ 69. But in view of Dr. Horenstein’s contrary position in his first declaration, and the lack of supporting evidence in his second, we do not find it credible. 37 C.F.R. § 42.65(a) (2022) (“Expert testimony that does not disclose the underlying facts or data on which the opinion is based is entitled to little or no weight.”); Apple Inc. v. MPH Techs. Oy, 28 F.4th 254 (Fed. Cir. 2022).” slip op. at 24

    • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

      “(4) Analysis We are persuaded by Petitioner’s argument that during the alignment process in Odachi corresponding to claim 13, there is a “spaced distance between the primary inductive coupler [230] and the secondary inductive receptacle 2” which is “reduced gradually and electromagnetic induction occurs between the coupler to the receptacle when the former coupler comes close to the latter receptacle.” Ex. 1005, 6:1–6. Thus, prior to any contact or precise alignment between the two cores, “an electromotive force is induced in the secondary coil 4 and this induced force is increased with the decrease in the spaced distance.” Id. at 6:6–8. At least in that spaced configuration, the evidence of record suggests that primary coil 31 produces a near-field component of flux into free space (the air space between the coils where there is no intervening core material) that is intercepted by secondary coil 4 to effect resonant inductive coupling, and that secondary coil 4 intercepts and receives the near-field component of flux in free space that is generated by primary coil 31 to effect resonant inductive coupling. See Ex. 1032 ¶¶ 48–52, 55. Thus, we find that Odachi discloses a “transmitting antenna” (coil 31) and a “receiving antenna” (coil 4) under Patent Owner’s proposed construction. We would reach the same finding under Petitioner’s proposed broader construction because the evidence suggests that Odachi’s coils 31 and 4 would have been considered “antennas” under the parties’ uncontested definition of that term, which is “a device that radiates and/or receives radio waves.” See id. ¶¶ 43–47, 53–54; Ex. 1032 ¶ 15 (Dr. Allen agreeing with this definition of “antenna”); Ex. 2001 ¶ 25 (Dr. Horenstein agreeing with this definition of “antenna”)). In addition, Petitioner persuasively shows that the free space between Odachi’s coils in the spaced configuration includes the “near-field region,” which includes the induction field around primary coil 31. See Ex. 2006, 498; Ex. 1045, 5:4–7; Ex. 1032 ¶¶ 53–54). Dr. Horenstein’s testimony does not contradict this. Although he points out that there are separate terms for inductive, near, and far fields, he also acknowledges that “[t]he region of space closer to the antenna than the far field is the near-field region.” Ex. 2010 ¶ 37 (citing Ex. 2006, 275).8” slip op. at 22

    Patent outcomesUS 8,466,654 mixed
    Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 8,466,654
  • PTAB · May 14, 2025 · IPR2024-00188 · APJ Terrence W Mcmillin · IPR · Final written decision

    Claims 1–10 and 12–15 are unpatentable as obvious over either asserted combination; claim 11 was not shown unpatentable under either ground.

    RulingsFinal written decision
    • Skill levelSkill level board ownDecided for petitioner

      “The only significant difference between the positions of Petitioner and Patent Owner is that Patent Owner would require that a skilled artisan have coursework or training or work experience in multimedia systems in addition to the other requirements. Otherwise, the positions of the parties are similar. Based upon this record and the qualifications on which the parties and their experts agree, we determine that a person of ordinary skill in the art to which the ’669 patent relates would have at least a Master of Science Degree (or higher degree) in an academic area emphasizing electrical engineering, computer engineering, or a similar technical Master’s Degree; or alternatively, a Bachelor’s Degree (or higher degree) in an academic area emphasizing electrical engineering, computer engineering, or an equivalent field with two or more years of work experience in a relevant field or relevant industry experience. However, our decision on obviousness is supported by either of the definitions offered by the parties.” slip op. at 10

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededPlain and ordinary meaningOther

      “Accordingly, we determine that no claim terms require express construction. See, e.g., Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . 4 Neither party argues lexicography or disavowal applies to any claim term. See generally Pet.; see generally PO Resp. that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). We apply the plain and ordinary meaning to all the claim terms. To the extent it is necessary to address the meaning of any claim term in order to make a final determination whether or not any challenged claim is unpatentable based on the arguments and evidence presented, we address the meaning as part of our unpatentability analysis.” slip op. at 11

    • Claim Construction › Intrinsic evidence (Phillips canons) › Preamble limiting or notPreamble not limitingDecided for petitioner

      “[1.0] A video playback system (1), comprising The Petitioner contends that the preamble of claim 1 is not limiting. Pet. 17 (“The preamble of claim 1 is not limiting because it merely states the purpose or intended use of the alleged invention. It does not define any of the claim limitations, which are set forth fully in the body of the claim (i.e., a video playback system).”). Nonetheless, Petitioner cites both Swafford and Masumoto and shows both cited references disclose video playback systems. Id. at 17–18. Patent Owner does not dispute Petitioner’s contention that the preamble is not limiting or dispute that the cited art discloses the preamble. See generally PO Resp. We determine that the preamble is not limiting but, if it were, the cited art has been shown to teach it. [1.1] a number of playback devices (6A, 6B) to playback a video on their” slip op. at 19

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

      “However, we do agree with Patent Owner that Petitioner’s contention that the cited combination of teachings is supported “because of the structural similarity between Swafford’s and Masumoto’s devices” (Pet. 54– 55) does not provide a motivation to combine. PO Resp, 47–48. The only structural similarity relied on by Petitioner in support of this argument is that Swafford and Masumoto both disclose use of LCDs. See Pet. 54–55. Petitioner provides an inadequate explanation as to how or why the use of LCDs which are a common form of video displays would motivate the combination of the relied-upon teachings. But, this deficiency does not undermine the persuasiveness of Petitioner’s overall showing of motivation to combine. After considering all the arguments and evidence offered by the parties, we determine that Petitioner shows that a person of ordinary skill in the art would have been motivated to combine the relied-upon teachings of Swafford and Masumoto with a reasonable expectation of success.” slip op. at 48

    Patent outcomesUS 11,405,669 mixed
    Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 11,405,669
  • PTAB · May 14, 2025 · IPR2024-00189 · APJ William V Saindon · IPR · Final written decision

    Claims 1–9 were not shown unpatentable because Fujiwara lacks the claimed horizontal position, and Bandy with Fowler lacks the claimed vertical position.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “A person of ordinary skill in the art . . . would have had at least a Master of Science Degree in an academic area emphasizing electrical engineering, computer engineering, wireless telecommunication systems, or an equivalent field (or a similar technical Master’s Degree, or higher degree). Ex. 1009, ¶34. Alternatively, . . . a Bachelor’s Degree (or higher degree) in an academic area emphasizing electrical engineering, computer engineering, wireless telecommunication systems, or an equivalent field with two or more years of work experience in electrical engineering, wireless telecommunication systems, computer engineering, or an equivalent field. Id. Additional education in a relevant field or relevant industry experience may compensate for a deficit in one of the other aspects of the requirements stated above. Id. Pet. 9. Patent Owner applies the same definition. PO Resp. 17. We apply the parties’ proposed level of ordinary skill because it is reasonably consistent with the level of skill implied in the disclosure of the ’340 patent and the cited prior art.” slip op. at 6

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownNo construction neededGranted in part

      “c) Conclusion Having reviewed the claim language and the specification, we determine that the claimed planogram stores one piece of data with respect to identification—a unique identifier—and two pieces of data with respect to location—a vertical position and a horizontal position. Further, claim 1 states that each location (i.e., each horizontal/vertical position pair) is unique (“one-to-one”) for each unique identifier. Ex. 1001, 8:25–27. Thus, we determine that no horizontal/vertical position pair will be associated with more than one unique identifier (and vice versa). No other terms require construction at this time. See Realtime, 912 F.3d at 1375.” slip op. at 9

    • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

      “taught by “the horizontal position of the electronic shelf label along the horizontal shelf part 21, as shown in FIG. 4.” Pet. 21 (citing Ex. 1009 ¶ 75). Certainly, each shelf label in the real world, as well as in the drawing of Figure 4, has a horizontal position. However, that does not mean that Fujiwara’s database stores information indicating the horizontal position of the shelf label as required by the claim. The claim is not calling for the shelf label to have a location; it is calling for location information to be accessible by the server so that the server can determine the location of the mobile terminal. Ex. 1001, 8:19–24 (claiming a “method being performed by a central server configured to access a planogram associating . . . identifiers . . . with . . . locations . . . defined by a vertical and horizontal position”), 8:41–46 (claiming a method step of “determining a location of the mobile terminal . . . based on . . . the planogram). For example, fields in a database storing horizontal and vertical positions would be sufficient. Id. at 6:31–36 (“The central server 2 determines the location of said mobile terminal 1 from the identifier of said electronic label 3 using the data of a planogram associating a location with the label identifier.”), 7:16–18 (calling for the planogram to be stored in a database). To the extent we accept that Fujiwara teaches a unique identifier (shelf label ID) and a vertical position (e.g., shelf number 21-1), we find Fujiwara to be missing a horizontal position as required by the claim because neither the shelf number nor the shelf label ID provides an indication of where along the shelf the shelf label is located.” slip op. at 14

    • ExcludeMotion to exclude, deniedDenied

      “III. PATENT OWNER’S MOTION TO EXCLUDE Patent Owner moves to exclude Exhibits 1013–1021 and 1024–1027. PO Mot. Excl. 1. Our analysis above focuses on a dispositive issue regarding the claimed planogram. We are not apprised of any citations to these documents in the briefing regarding the planogram issue. Indeed, according to Patent Owner, Exhibits 1013–1021 involve one of the issues we did not address, regarding near-field communications. PO Mot. Excl. 3–4. Because this motion involves a question on evidence that is not relevant to the issues discussed in this Decision, we need not rule on the motion at this time. We dismiss Patent Owner’s motion to exclude as moot.” slip op. at 27

    Patent outcomesUS 10,674,340 not shown unpatentable
    Claim construction§ 103 obviousnesscites Phillips
    Patents in suitUS 10,674,340
  • PTAB · Apr 14, 2025 · IPR2023-01416 · APJ Ken B Barrett · IPR · Final written decision

    The Board held claims 1–15 and 18 not unpatentable; the petition failed to prove the asserted anticipation and obviousness grounds, including failure to establish WiMAX as prior art.

    RulingsFinal written decision
    • Adverse judgmentAdverse judgmentOther

      “filed with the Office a statutory disclaimer disclaiming method claims 16, 17, 19, and 20. See Ex. 2007; see also Tr. 33, 21:1–12 (Patent Owner’s counsel informing the Board that the disclaimer had been filed in the USPTO Patent Center, and Petitioner’s counsel having no objection to the filing of the disclaimer as an exhibit in this inter partes review); Tr. 34:19 1 Petitioner identifies Nokia of America Corporation, Ericsson Inc., and T-Mobile USA, Inc. as real parties in interest. Pet. 72. 2 Patent Owner identifies General Access Solutions, Ltd. as the real party in interest. Paper 6, 1. (Patent Owner’s counsel stating, “General Access has disclaimed method Claims 16, 17, 19, and 20.”). We treat disclaimed claims as if they never existed. See Facebook, Inc. v. SKKY, LLC, CBM2016-00091, Paper 12 at 8 (PTAB Sept. 28, 2017) (expanded panel) (precedential) (“The Federal Circuit has held consistently that claims disclaimed under § 253(a) should be treated as though they never existed.”) (citing, inter alia, Vectra Fitness, Inc. v. TWNK Corp., 162 F.3d 1379, 1383 (Fed. Cir. 1998) (“This court has interpreted the term ‘considered as part of the original patent’ in section 253 to mean that the patent is treated as though the disclaimed claims never existed.”); Guinn v. Kopf, 96 F.3d 1419, 1422 (Fed. Cir. 1996) (“A statutory disclaimer under 35 U.S.C. § 253 has the effect of canceling the claims from the patent and the patent is viewed as though the disclaimed claims had never existed in the patent.”)). Accordingly, the remaining claims challenged in this proceeding are apparatus claims 1–15 and method claim 18.” slip op. at 2

    • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

      “of both types of parameters to be stored in the same “device” is consistent with the claim language. The claim recites “a profile parameter storage device,” “said profile parameter storage device for storing [two parameter] values,” and refers to “the values stored at said profile parameter storage device.” Ex. 1001, 13:10–16. Accordingly, the claim language speaks of a single device for storing both types of parameters.12 And, Petitioner does” slip op. at 32

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableNot shown unpatentable

      “of both types of parameters to be stored in the same “device” is consistent with the claim language. The claim recites “a profile parameter storage device,” “said profile parameter storage device for storing [two parameter] values,” and refers to “the values stored at said profile parameter storage device.” Ex. 1001, 13:10–16. Accordingly, the claim language speaks of a single device for storing both types of parameters.12 And, Petitioner does” slip op. at 32

    • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication not establishedNot shown unpatentable

      “Id. “[A] work is not publicly accessible if the only people who know how to find it are the ones who created it.” Samsung Elecs. Co. v. Infobridge Pte. Ltd., 929 F.3d 1363, 1372 (Fed. Cir. 2019) (citing SRI Int’l, Inc. v. Internet Sec. Sys., Inc., 511 F.3d 1186, 1196 (Fed. Cir. 2008) Application of Bayer, 568 F.2d 1357 (CCPA 1978)). Accordingly, in this case, Petitioner must demonstrate by a preponderance of the evidence that the WiMAX exhibit was disseminated or otherwise made available to interested ordinary artisans outside of the group that created the document. Petitioner has failed to satisfy that burden.” slip op. at 48

    Patent outcomesUS 6,947,477 not shown unpatentable
    § 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 6,947,477
  • Apple Inc. v. Haptic, Inc.Institution denied
    PTAB · Apr 4, 2025 · IPR2024-01476 · APJ Andreas Baltatzis · IPR · Institution

    The Board denied institution of review of claims 3, 6, 7, 12, and 13, exercising § 314(a) discretion under Fintiv after balancing the parallel litigation factors.

    RulingsInstitution decision
    • PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied

      “prejudice to renewal if the PTAB institutes IPR review.” Ex. 2023, 6. A stay denial without prejudice to renew if a PTAB trial is instituted “usually weigh[s] against exercising authority to deny institution.” Fintiv, Paper 11 at 7. But “proximity of the court’s trial date and investment of time are relevant to how much weight to give to the court’s willingness to reconsider a stay.” Id. Although the District Court denied a stay pending the Board’s decision, the court also identified the proximity of the trial date and litigation investment as significant factors in its initial denial of the requested stay. See Ex. 2023, 6. Thus the evidence is inconclusive as to whether or not the District Court would stay the case if we granted institution at this time. Absent a clear indication from the District Court, we decline to predict whether a stay would be granted.” slip op. at 9

    • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away foundOther

      “a sensor in a fixed position relative to a sensing surface to provide a fixed reference point for accurate detection of vibratory signals”), 171 (“the sensor is held in a particular position within the housing and relative to the surface that the housing is mounted to”). Stewart teaches the opposite: a sensor that is vibrated inside a housing to measure rotational movement. Ex. 1006, 5:54–56, 6:5–10, 6:20–31; Ex. 2001 ¶¶ 100, 133, 138. Thus, Stewart’s sensor is flexibly suspended with brackets inside the housing to allow movement and minimize transmission of vibrations from the surface to the sensor. Ex. 1006, 5:7–24, 7:61–64; Ex. 2001 ¶ 102. Petitioner combines Murakoshi with Stewart’s brackets and case mounts to fix the sensor to prevent it from moving within the housing and thus enable the sensor to detect vibrations from outside the housing. See Pet. 24, 33–36. But Stewart’s teachings undermine the very reason proffered by Petitioner, because Stewart’s sensor is movably suspended within the housing so that it does not detect vibrations from outside the housing. See DePuy Spine, Inc. v. Medtronic Sofamor Danek, Inc., 567 F.3d 1314, 1326 (Fed. Cir. 2009) (“An inference of nonobviousness is especially strong where the prior art’s teachings undermine the very reason being proffered as to why a person of ordinary skill would have combined the known elements.”).” slip op. at 14

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successReasonable expectation not foundOther

      “Likewise, we find a significant weakness in Petitioner’s argument for a reasonable expectation of success in the combination. “The reasonable expectation of success requirement refers to the likelihood of success in combining references to meet the limitations of the claimed invention.” Intelligent Bio-Sys., Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1367 (Fed. Cir. 2016). Claim 1 requires “said sensor being in a fixed position portion” that “set[s] a rigid position of said sensor relative to said mounting surface” (limitation 1e). As discussed above, neither Murakoshi nor Stewart appear to teach a sensor in a fixed position relative to said engagement means or a rigid position relative to said mounting portion. Accordingly, even if Murakoshi’s and Stewart’s teachings were to be combined, the combined teachings would not appear to meet the limitations of the claimed invention.” slip op. at 14

    § 103 obviousnessDiscretionary denial
    Patents in suitUS 9,996,738
  • Apple Inc. v. Haptic, Inc.Institution denied
    PTAB · Apr 4, 2025 · IPR2024-01475 · APJ Andreas Baltatzis · IPR · Institution

    The Board denied institution of IPR challenging claims 1, 2, 4, 5, and 8–11, exercising its discretion under § 314(a) based on the Fintiv factors.

    RulingsInstitution decision
    • PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Institution denied fintivDenied

      “litigation, the Board assesses all relevant circumstances, including the merits, to balance considerations such as system efficiency, fairness, and patent quality. See Fintiv, Paper 11; NHK Spring Co. v. Intri-Plex Techs., Inc., IPR2018-00752, Paper 8 at 19–20 (PTAB Sept. 12, 2018) (precedential). We consider six factors as part of this balanced assessment when determining whether to use our discretion to deny institution: 1. whether the court granted a stay or evidence exists that one may be granted if a proceeding is instituted; 2. proximity of the court’s trial date to the Board’s projected statutory deadline for a final written decision; 3. investment in the parallel proceeding by the court and the parties; 4. overlap between issues raised in the petition and in the parallel proceeding; 5. whether the petitioner and the defendant in the parallel proceeding are the same party; and 6. other circumstances that impact the Board’s exercise of discretion, including the merits. Fintiv, Paper 11 at 5–6. In evaluating these factors, we “take[] a holistic view of whether efficiency and integrity of the system are best served by denying or instituting review.” Id. at 6.” slip op. at 8

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot reached

      “vibrations on a surface and using the vibrations to generate a control signal for a device. Ex. 1004 ¶¶ 21, 25, 29, 30, 36. To measure vibrations on a surface, Murakoshi’s sensor must be fixed within the housing and held in position relative to the surface. See Ex. 1003 ¶¶ 142 (“it is necessary to hold a sensor in a fixed position relative to a sensing surface to provide a fixed reference point for accurate detection of vibratory signals”), 174 (“the sensor is held in a particular position within the housing and relative to the surface that the housing is mounted to”). Stewart teaches the opposite: a sensor that is vibrated inside a housing to measure rotational movement. Ex. 1006, 5:54–56, 6:5–10, 6:20–31; Ex. 2001 ¶¶ 100, 133, 138. Thus, Stewart’s sensor is flexibly suspended with brackets inside the housing to allow movement and minimize transmission of vibrations from the surface to the sensor. Ex. 1006, 5:7–24, 7:61–64; Ex. 2001 ¶ 102. Petitioner combines Murakoshi with Stewart’s brackets and case mounts to fix the sensor to prevent it from moving within the housing and thus enable the sensor to detect vibrations from outside the housing. See Pet. 23, 31–35. But Stewart’s teachings undermine the very reason proffered by Petitioner, because Stewart’s sensor is movably suspended within the DePuy Spine, Inc. v. Medtronic Sofamor Danek, Inc., 567 F.3d 1314, 1326 (Fed. Cir. 2009) (“An inference of nonobviousness is especially strong where the prior art’s teachings undermine the very reason being proffered as to why a person of ordinary skill would have combined the known elements.”).” slip op. at 14

    • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Not reached

      “We find Petitioner’s argument based on the combination of Li and iFixit to be a closer call than the argument based on Murakoshi and Stewart. However, because we exercise our discretion to deny the Petition in view of the parallel litigation, we need not determine whether Petitioner meets the standard for institution based on the combination of Li and iFixit.” slip op. at 17

    § 103 obviousnessDiscretionary denial
    Patents in suitUS 9,996,738
  • PTAB · Mar 28, 2025 · IPR2024-00208 · APJ Terrence W Mcmillin · IPR · Final written decision

    Claims 1–20 were not shown unpatentable because Wu and the asserted combinations did not teach or suggest the claimed acquisition and transmission of a sequence of shelf label identifiers.

    RulingsFinal written decision
    • Expert testimonyPetitioner expert discountedDecided for patent owner

      “identifying information and the label location information[,]’ by extrapolating from the ESL that is already installed as required by steps S104 and S106.” Pet. 16 (citing Ex. 1003, 4:26-28; Ex. 1009 ¶ 81) (third and fourth alterations in original). There is no explanation or reasoning provided in the Petition to support this assertion. See id. We can find no support for this assertion that the method described in Wu requires this undisclosed step or that it could not otherwise possibly work14 to create the relationship between the label identifying information and the label location information of the added shelf label by extrapolation from the ESL that is already installed. The only evidence cited in support of this assertion is a short passage in Wu (Ex. 1003, 4:26–28) and paragraph 81 of the Declaration of Dr. Tentzeris (Ex. 1009). This short passage in Wu provides that, “[i]n step S106, the deploying device 130 or the controlling device 120 creates the relationship between the label identifying information and the label location information.” Ex. 1003, 4:26–28. This passage does not support Petitioner’s assertion. The cited paragraph in the Declaration of Dr. Tentzeris provides: 81. In my opinion, a POSITA would understand that, without acquiring this second identifier in the sequence (which 14 Prior art patents enjoy a presumption of enablement. Apple Inc. v. Corephotonics, Ltd., 861 Fed. Appx. 443, 450 (Fed. Cir. 2021). Wu is presumed to enable what it discloses. See Amgen Inc. v. Hoechst Marion Roussel, Inc., 314 F.3d 1313, 1355 (Fed. Cir. 2003) (“a presumption arises that both the claimed and unclaimed disclosures in a prior art patent are enabled”). However, even without applying this presumption, Wu provides a disclosure that establishes how to create the relationship between the label identifying information and the label location information of the added shelf label by extrapolation or interpolation without the reading device acquiring the label identifying information of the adjacent shelf label which is already installed. See Ex. 1003, 3:59–4:28. is explicitly shown in FIG. 3B of Wu), the reading device could not possibly “create[] the relationship between the label identifying information and the label location information[,]” by extrapolating from the ESL that is already installed as required by steps S104 and S106. Ex. 1003, [4:26-28]. Ex. 1009 ¶ 81. Dr. Tentzeris does not support his opinion with any explanation, reasoning, facts or data, here or elsewhere. This unsupported, conclusory testimony is entitled to little or no weight. See cxLoyalty, Inc. v. Maritz Holdings Inc., 986 F.3d 1367, 1378 (Fed. Cir. 2021) (“We do not accord weight to conclusory expert testimony.”); see also 37 C.F.R. § 42.65(a) (“Expert testimony that does not disclose the underlying facts or data on which the opinion is based is entitled to little or no weight.”). There is no evidence that supports Petitioner’s assertion that a skilled artisan would understand from Wu that the reading device acquires the label identifying information of a second shelf label that is already installed and adjacent to the added shelf label.” slip op. at 27

    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “A person having ordinary skill in the art relating to the subject matter of the ’709 Patent as of the Critical Date (“POSITA”) would have had at least a Master of Science Degree in an academic area emphasizing electrical engineering, computer engineering, wireless telecommunication systems, or an equivalent field (or a similar technical Master’s degree, or higher degree). Pet. 6 (citing Ex. 1009 ¶ 31). Petitioner further contends, in the alternative, that “a POSITA would have had a Bachelor’s Degree (or higher degree)” in one of the fields noted above, with “two or more cannot demonstrate unpatentability of any claim of the ’709 Patent because Petitioners fail to identify a ‘reading device’ that acquires and transmits the ‘sequence of label identifiers’ recited by the claims.”). Our decision is based on our determination that Petitioner has failed to establish that the cited art teaches or suggests acquiring and transmitting a sequence of label identifiers as recited in the independent claims of the ’709 patent. years of work experience” in one of those fields. Id. According to Petitioner, “[a]dditional education in a relevant field or relevant industry experience may compensate for a deficit in one of the other aspects of the requirements stated above.” Id. Patent Owner applies Petitioner’s definition of the level of ordinary skill in the art. PO Resp. 16. Determining the level of ordinary skill in the art involves various factors, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (citation omitted). The prior art of record also reflects the level of ordinary skill in the art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). We adopt the assessment offered by Petitioner, as it is not disputed by the Patent Owner and is consistent with the ’709 patent and the asserted prior art.” slip op. at 10

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “necessary to resolve the controversy involved in this IPR, and the terms of the ’709 Patent should be given their ordinary and customary meaning.” Pet. 4. In the claim construction section of its Response, Patent Owner discusses the claim terms “location(s)” and “planogram.” See PO Resp. 16– 29. As discussed in our analysis below, we determine that Petitioner has failed to show that the prior art teaches or suggests certain limitations of the claims that do not include either the term “location(s)” or “planogram.” Accordingly, no need exists to expressly construe any claim terms to resolve the parties’ disputes. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). Our decision relies on the plain and ordinary meaning of the limitations on which our decision is based and no need exists to expressly construe any claim term to make our decision.8” slip op. at 9

    • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

      “Based on the entire record of this proceeding, we find that Wu does not teach or suggest: (1) “acquiring, by a reading device, a sequence of label identifiers . . . comprising a label identifier of an adjacent shelf label which is adjacent to the added shelf label” as recited in independent claim 1: (2) “transmitting, by the reading device, the sequence of label identifiers to the computer system” as recited in independent claim 1: (3) “acquiring, by a reading device, a sequence of label identifiers . . . comprising a label identifier of an adjacent shelf label which is adjacent to the added shelf label” as recited in independent claim 10; (4) “transmitting, by the reading device, the sequence of label identifiers to the computer system” as recited in independent claim 10: (5) “the computer system being configured to receive, from the reading” slip op. at 37

    Patent outcomesUS 11,010,709 not shown unpatentable
    Claim construction§ 103 obviousnesscites Phillips · Graham
    Patents in suitUS 11,010,709

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.