- Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.All claims unpatentablePTAB · Jun 1, 2026 · IPR2025-00117 · APJ Michael T Cygan · IPR · Final written decision
Claims 1–19 are unpatentable: claims 1–9, 11–16, 18, and 19 as obvious over Kim; claims 10 and 17 as obvious over Kim and Fang, Park, and Park and Fang.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“at the critical time “would have had a bachelor of science degree in electrical engineering or a similar discipline, along with 2-3 years of professional experience working with (e.g., researching, designing, or teaching) monolithic 3D structures and NAND flash memory devices, or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 27 (citing Ex. 1003 ¶ 42). Petitioner further asserts that a POSITA “would have been aware of and generally knowledgeable about 3D NAND’s structure, its component parts, how it operates, and how it is controlled.” Id. Patent Owner does not dispute Petitioner’s definition. PO Resp. 7. We adopt Petitioner’s proposed 4 Neither party presents evidence or arguments regarding objective evidence of non-obviousness. Pet. 103; PO Resp. the ’711 patent and the prior art of record.” slip op. at 5
- Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed petitioner constructionDecided for petitioner
“Based on the record before us, we agree with Petitioner that “on a surface” should be interpreted in line with the definition of “on” set forth in the ’711 patent. Ex. 1001, 4:1–6. We particularly note that the ’711 patent states that “‘on’ . . . should be interpreted in the broadest manner” and that “on” is not limited to “directly on.” Id. Instead, the ’711 patent states that “‘on’ also includes the meaning of ‘on’ something with an intermediate feature or layer therebetween.” Id. Patent Owner agrees that this definition controls the “standalone ‘on’” term such that A may be on B even if there is an intervening layer between them. Tr. 55:8–11 (“The standalone ‘on,’ we agree in the context of the patent, you can have intervening layers. I think the patent is clear about that.”). Claim 14 recites that the etch-stop layer is “on” something; i.e., “on a side surface and a top surface of each step.” Ex. 1001, 16:20–22. Patent Owner agrees that a surface is a “something.” Tr. 56:5–8 (“surface obviously is a something”). Substituting the “a “‘on’ something with an intermediate feature or layer therebetween” results in claim 14 reading as, “on a surface with an intermediate feature or layer therebetween.” Unlike “directly on,” which specifies the relation between two things, “a surface” may merely indicate the thing that something is “on,” particularly when “on” is “interpreted in the broadest manner” as expressly required by the ’711 patent.” slip op. at 7
- Expert testimonyPatent owner expert discountedDecided for petitioner
“Although Dr. Campbell testified in his deposition in response to Petitioner’s counsel that “on the surface” requires direct contact with the surface, his interpretation was based on “embodiments of” the patent rather than a general understanding of a person skilled in the art confronted with that term. Ex. 1027, 122:6–25, 124:6–23 (“I’m not sure if there are other sources for that, but it was on the ’711, so I’ve taken it there.”). Dr. Campbell, upon questioning from Patent Owner’s counsel, later stated that “an expert in semiconductor fabrication” would understand “on the surface” to mean “contact between one layer and another . . . with nothing in between.” Id. at 146:25–147:6. However, Dr. Campbell did not explain why such an interpretation is particular to the semiconductor fabrication art, or provide other explanation or support for this statement, which is in tension with the definition of “on” in the ’711 patent. Accordingly, we significantly discount the weight accorded to that statement. Phillips, 415 F.3d at 1318 (stating, “conclusory, unsupported assertions by experts as to the definition of a claim term are not useful to a court. Similarly, a court should discount any expert testimony ‘that is clearly at odds with the claim construction mandated by the claims themselves, the written description, and patent.’”). On balance, Dr. Campbell’s testimony is best understood as a description of certain Figures of the ’711 patent rather than a representation of an ordinarily skilled person’s understanding of the term “on the surface.” See Ex. 2009 ¶ 47 (describing Figs. 1, 3, and 4 as depicting layers in contact with the underlying layer or substrate). For example, Dr. Campbell describes Figure 9A as having a barrier layer “on and directly contacting the top and side surfaces of each step.” Id. ¶ 28 (emphasis added) (citing inter alia Ex. 1001, 7:6–67). Dr. Campbell does not explain why, beyond the fact that many Figures show layers as adjacent and in contact, a person of ordinary skill in the relevant art would understand those Figures to limit the claim language rather than illustrating particular embodiments that fall within a broader scope of claims 14 and 15. See Hill-Rom Servs., Inc. v. Stryker Corp., 755 F.3d 1367, 1371 (Fed. Cir. 2014) (“While we read claims in view of the specification, of which they are a part, we do not read limitations from the embodiments in the specifications into the claims.”).” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“We agree with Petitioner that Kim’s first and second section are described as compatible, not mutually exclusive, embodiments. Kim’s second section builds further layers upon the structure of its first section, and states: In these embodiments, the same elements as in the embodiments previously described with reference to FIGS. 5A through 14A and FIGS. 5B through 14B will be denoted by the same reference numbers therein, and for concise description, overlapping description of elements previously described with reference to FIGS. 5A through 14A and FIGS. 5B through 14B may be omitted. Ex. 1005 ¶ 184 (emphasis added). Patent Owner argues that only the embodiments in Figures 17A–22B describe an etch-stop layer and a barrier layer (as claimed), and that the language cited for a gate-stack-on-top configuration (e.g., Ex. 1005 ¶¶ 90, 91, and 240) is “conspicuously absent from the description of Figures 17A–22B.” PO Resp. 20 (citing Ex. 2009 ¶ 36). However, Figures 17A–22B do not further address the underlying staircase structure that was detailed in the descriptions of the Figures 4 through 15 embodiments. While Figures 17A–22B show a gate-stack-on-bottom configuration, this merely continues the gate-stack-on-bottom illustrations that were used in all of the previous Figures, even for those in which it is undisputed that a gate-stack-on-top configuration is a described alternative. The Figures exemplify rather than limit the description of the gate-stack-on-bottom view in Figures 4–15 and do not exclude the gate-stack on bottom description of the embodiments exemplified by those figures.” slip op. at 17
Patent outcomesUS 10,672,711 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,672,711 - Merck Sharp & Dohme LLC v. Halozyme, Inc.All claims unpatentablePTAB · May 18, 2026 · PGR2025-00006 · APJ Cynthia M Hardman · PGR · Final written decision
Claims 1–4 and 8–13 are unpatentable under §112(a) for lack of written description and enablement, and under §103 as obvious over the ’429 patent and Chao.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“II. ANALYSIS A. Level of Ordinary Skill in the Art We consider the grounds of unpatentability in view of the understanding of a person of ordinary skill in the art (sometimes referred to 3 US 7,767,429 B2, issued Aug. 3, 2010 (the “’429 patent”) (Ex. 1005). 4 Chao et al., Structure of Human Hyaluronidase-1, a Hyaluronan Hydrolyzing Enzyme Involved in Tumor Growth and Angiogenesis, 46 BIOCHEMISTRY 6911–20 (2007) (Ex. 1006). 5 Patent Owner withdrew the Declaration of Dr. Triggs-Raine. PO Resp. 10 n.6. herein as “POSA”) as of the effective filing date of the challenged claims. Petitioner contends that one of ordinary skill in the art would have had an undergraduate degree, a Ph.D., and post-doctoral experience in scientific fields relevant to study of protein structure and function (e.g., chemistry, biochemistry, biology, biophysics). From training and experience, the person would have been familiar with factors influencing protein structure, folding and activity, production of modified proteins using recombinant DNA techniques, and use of biological assays to characterize protein function, as well with techniques used to analyze protein structure (i.e., sequence searching and alignments, protein modeling software, etc.). Pet. 16.” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“5. Evidence and Analysis “The construction of claims is simply a way of elaborating the normally terse claim language in order to understand and explain, but not to change, the scope of the claims.” Embrex, Inc. v. Serv. Eng’g Corp., 216 F.3d 1343, 1347 (Fed. Cir. 2000). We first turn to the intrinsic evidence because “the specification is always highly relevant to the claim construction analysis. Usually, it is dispositive; it is the single best guide to the meaning of a disputed term.” Phillips v. AWH Corp., 415 F.3d 1303, 1314 (Fed. Cir. 2005) (en banc). “[T]he specification may reveal a special definition given to a claim term by the patentee that differs from the meaning it would otherwise possess. In such cases, the inventor’s lexicography governs.” Id. at 1316. [T]he definition in the patent documents controls the claim interpretation. . . . Any other rule would be unfair to competitors who must be able to rely on the patent documents themselves, without consideration of expert opinion that then does not even exist, in ascertaining the scope of a patentee’s right to exclude. Southwall Tech., Inc. v. Cardinal IG Co., 54 F.3d 1570, 1578 (Fed. Cir. 1995). a) Intrinsic evidence Our analysis begins with the claims and Specification of the ’262 patent. Claim 1 recites a “modified PH20 polypeptide” that also requires the polypeptide sequence is 95% identical to one of the 35 recited SEQ ID NOs and with at least one of seven amino acids at position 317 of the reference sequence. The ’262 patent states “PH20 refers to a type of hyaluronidase that occurs in sperm and is neutral-active.”7 Ex. 1001, 45:45– 46; cf. id. at 68:33–37. The ’262 patent further explains that “[r]eference to PH20 includes precursor PH20 polypeptides and mature PH20 polypeptides (such as those in which a signal sequence has been removed), truncated forms thereof that have activity, and includes allelic variants and species variants, variants encoded by splice variants, and other variants.” Id. at 45:62–67. The ’262 patent states that “PH20 polypeptides also include those that contain chemical or posttranslational modifications and those that do not contain chemical or posttranslational modifications.” Id. at 46:4–7.” slip op. at 15
- Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateUnpatentable
“four species tested, and particularly in a primate model that is physiologically more similar to humans, shows that a POSA would not have understood even unmodified PH20 polypeptides to provide a contraceptive effect in humans and most other species. The data Patent Owner relies upon at most shows an immunocontraceptive effect for unmodified PH20 polypeptides limited to guinea pigs. It does not evidence that a POSA would have understood that the recited modified polypeptides would provide such an effect or otherwise be useful in a contraceptive vaccine. Accordingly, even if the term “modified PH20 polypeptides” were interpreted to include inactive polypeptides that can serve as antigens to provide a contraceptive effect, the preponderance of the evidence does not show that a POSA would have understood the inventors to be in possession of the full scope of the recited polypeptides capable of such use. 7. Analysis We find the preponderance of the evidence supports a finding that the claims fail to comply with the written description requirement. “Every patent must describe an invention. It is part of the quid pro quo of a patent.” Ariad, 598 F.3d at 1345. In determining compliance with the written description requirement for nucleic acid genus claims, the Federal Circuit has identified two extremes. In Capon, claims relying on known nucleotide sequences with known functions were found to satisfy the written description requirement. Capon v. Eshhar, 418 F.3d 1349, 1358 (Fed. Cir. 2005). At the other end, Juno found that for broad claims to a nucleic acid encoding a chimeric T cell receptor with a functional requirement to bind a target, “the written description ‘must demonstrate that the applicant has made a generic invention that achieves the claimed result and do so by showing that the applicant has invented species sufficient to support a claim to the functionally-defined genus.’” Juno Therapeutics, Inc. v. Kite Pharma, Inc., 10 F.4th 1330, 1337 (Fed. Cir. 2021) (quoting Ariad, 598 F.3d at 1349). As explained above, claim 1 requires modified PH20 polypeptides with some hyaluronidase activity. See supra Section II.B. Based on this claim interpretation, we find the evidence in this case closer to Juno than Capon, and that the ’262 patent does not disclose sufficient structural features in the PH20 sequences associated with hyaluronidase or” slip op. at 57
- Disclosure Requirements (§112) › Enablement (Wands, Amgen full scope)Not enabledUnpatentable
“6. Analysis Petitioner has the burden to identify how the specification allegedly fails to enable the claims. We address the Wands factors and the parties’ respective arguments and evidence. a) Breadth of Claims and Nature of the Invention Dr. Park states, regarding the breadth of claim 1, that he “calculated the number of distinct polypeptides that exist that meet the specified criteria.” Ex. 1004 ¶ 173. Dr. Park’s table is reproduced below: Dr. Park’s table shows that the “number of distinct peptides is extremely large by all accounts, ranging from 1049 to 1066.” Id. Dr. Hecht agrees, stating the “sequence identity language causes the claims to encompass an immense number of distinct PH20 polypeptides.” Ex. 1003 ¶ 120. To illustrate how large a number like 1066 is, Dr. Hecht states that an “aggregate weight of the smallest set containing one molecule of each of the PH20 mutants would be . . . = 1.37 x 1027 kg. The weight of the Earth is ‘only’ ~ 5.97 x 1024 kg.” Id. ¶ 123. That is, Dr. Hecht states that a complete set of one single molecule of protein that comprises all possible mutations in PH20 as recited in claim 1 would weigh about one thousand times more than the entire mass of planet Earth. See id. In deposition, Dr. Hecht stated “my sense was that the ’262 patent lists a minuscule and highly biased sample of what would be within that fence, in the sense that it only lists single amino acid substitutions while at the same time it’s attempting to claim things that have 20 or more substitutions.” Ex. 2076, 203:6‒12. When asked if a sequence “gives you enough information to tell whether that amino acid sequence is 95 percent identical to SEQ ID NO. 3”, Dr. Hecht answered “Yes, but that’s all it tells you. It doesn’t tell you anything about active, precipitated, aggregated, folded. It doesn’t tell you anything.” Id. at 204:11‒19.” slip op. at 70
Patent outcomesUS 12,152,262 unpatentableClaim construction§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 12,152,262 - Motorola Mobility LLC / Google LLC v. Multifold International Incorporated Pte. Ltd.All claims unpatentablePTAB · May 15, 2026 · IPR2025-00038 · APJ Kristen L Droesch · IPR · Final written decision
Claims 1–7, 10–13, 16, 17, 19, and 20 are unpatentable as obvious over Chin; the Board did not find them anticipated by Chin or Whitehorn.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner asserts that [a] person of ordinary skill in the art . . . (‘POSITA’) would have had at least a bachelor’s degree in electrical engineering, computer engineering, computer science, or a related field plus at least two years of work or post-graduate experience in image capture, image processing, image display, user interfaces, or a related field. Additional education could offset a lesser amount of experience and vice versa. Pet. 16. Patent Owner accepts Petitioner’s definition. See PO Resp. 25. We adopt Petitioner’s undisputed definition of a person of ordinary skill in the art because it is consistent with the level of skill reflected by the ’842 Patent Specification and the asserted prior art.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“We agree with Petitioner that claim construction is unnecessary. As demonstrated in the analysis provided below addressing this claim limitation in view of the prior art, we need not explicitly construe “wherein in each image capture mode a display on the first or second screen is different.” See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). Similarly, we need not construe any other claim terms or phrases to resolve the controversy between the parties.” slip op. at 9
- Strike new argumentNew argument disregardedDecided for patent owner
“We agree with Patent Owner that Petitioner’s arguments relying on Kennametal are belated. A “[p]etitioner may not submit new evidence or argument in reply that it could have presented earlier, e.g. to make out a prima facie case of unpatentability.” Patent Trial and Appeal Board Consolidated Trial Practice Guide (Nov. 2019)6 at II.I. Thus, we need not consider Petitioner’s belated argument raised for the first time in the Reply. In any event, we agree that Kenneametal is inapplicable for the purpose of supplying a claim limitation missing from Chin’s disclosure. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 851 F.3d 1270, 1274 (Fed. Cir. 2017) (“Kennametal does not stand for the proposition that a reference missing a limitation can anticipate a claim if a skilled artisan viewing the reference would ‘at once envisage’ the missing limitation.”). Chin’s disclosure is silent regarding what is or is not displayed on first display 51 when images are displayed on second display 52 in self-photographing mode, and similarly silent regarding what is or is not 6 Available at www.uspto.gov/patents/ptab/trial-practice-guide. displayed on second display 52 when images are displayed on first display 51 in outward-facing mode. See generally Ex. 1004.” slip op. at 18
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element) › Inherent disclosureInherency not foundNot shown unpatentableNot shown unpatentable
“We agree with Patent Owner that the theory of inherency was not raised in the Petition and is therefore waived. Compare Pet. 29–33, with Pet. Reply 11–15. In any event, we also agree that Petitioner’s speculation regarding the disclosure of Chin is insufficient to support a theory of inherency. See Pet. Reply 11–15. As explained above, Chin’s disclosure is silent regarding what is or is not displayed on first display 51 when images are displayed on second display 52 in self-photographing mode, and similarly silent regarding what is or is not displayed on second display 52 when images are displayed on first display 51 in outward-facing mode. See Ex. 1004. Speculation regarding the possibilities and probabilities of what is displayed on first display 51 in self-photographing mode, and what is displayed on second display 52 in outward-facing mode are insufficient to establish inherency. See In re Robertson, 169 F.3d at 745. For the forgoing reasons and based on the entire record developed during trial, the preponderance of the evidence does not support Petitioner’s showing that Chin discloses “wherein in each image capture mode a display on the first or second screen is different.” Accordingly, based on the entire record developed during trial the preponderance of the evidence does not support Petitioner’s showing that Chin anticipates claim 1.” slip op. at 20
Patent outcomesUS 8,836,842 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,836,842 - Qiagen Sciences, LLC v. Tecan Genomics, Inc.All claims unpatentablePTAB · May 13, 2026 · IPR2025-00028 · APJ Zhenyu Yang · IPR · Final written decision
Claims 1–15 and 17–22 are unpatentable as obvious over the specified combinations of Shapero, Delseny, and, for certain claims, Hamady or Jones.
RulingsFinal written decision- Skill levelSkill level board ownDecided for patent owner
“In the DI, we addressed Patent Owner’s arguments disputing Petitioner’s proposed definition. DI 17–18 (citing Prelim. Resp. 11–12). We stated that for purposes of this Decision, we find a POSA would have had a Ph.D. in molecular biology, molecular genetics, bioinformatics, biochemistry, or a related field. Alternatively, a POSA would have had a B.S. or M.S. degree with three to five years of experience working in any of those fields. Additionally, the POSA would have had experience with NGS sequencing methods and a working knowledge of how those methods functioned. Id. at 18. After institution, Patent Owner states that, for purposes of this proceeding, it adopts the Board’s definition of a POSA. PO Resp. 12. Based on the entirety of the trial record, we maintain our finding of a POSA’s skill level.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Claim Construction In an inter partes review, we construe a claim term “using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b).” 37 C.F.R. § 42.100(b) (2020). Under that standard, the words of a claim “are generally given their ordinary and customary meaning,” which is “the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention, i.e., as of the effective filing date of the patent application.” Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc). Claim terms need only be construed to the extent necessary to resolve the controversy. Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011). On this record and for purposes of this Decision, we see no need to construe any claim term expressly.” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner
“A reference teaches away “when a person of ordinary skill, upon reading the reference, would be discouraged from following the path set out in the reference, or would be led in a direction divergent from the path that was taken by the applicant.” In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004). “The prior art’s mere disclosure of more than one alternative does not constitute a teaching away from any of these alternatives because such disclosure does not criticize, discredit, or otherwise discourage the solution claimed.” Id.” slip op. at 29
Patent outcomesUS 10,036,012 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,036,012 - Google LLC / Motorola Mobility LLC v. Multifold International Incorporated Pte. Ltd.No claims unpatentablePTAB · May 13, 2026 · IPR2025-00058 · APJ Arthur M Peslak · IPR · Final written decision
Claims 1, 2, 4, 6, 9, 10, 12–14, and 18–20 were not shown unpatentable because Petitioner failed to establish its challenges by a preponderance of the evidence.
RulingsFinal written decision- BurdenNot shown unpatentable
“IV. CONCLUSION Weighing the competing evidence and testimony, we determine that Petitioner fails to establish by a preponderance of the evidence that the Challenged Claims of the ’494 patent are unpatentable.” slip op. at 85
- ExcludeNot reached
“III. PETITIONER’S MOTION TO EXCLUDE Petitioner moves to exclude Exhibits 2034–2038, paragraphs 38 and” slip op. at 84
Patent outcomesUS 9,158,494 not shown unpatentableNonecites KSR · GrahamPatents in suitUS 9,158,494 - Stryker Corporation / Wright Medical Technology, Inc v. Osteomed LLCSome claims unpatentablePTAB · May 4, 2026 · IPR2021-01452 · APJ Sheridan K Snedden · IPR · Remand
On remand, claims 6, 8, 9, 13, and 19 are unpatentable; claims 2–5, 11, 12, 17, and 18 were not shown unpatentable over Slater or Slater and Weaver.
RulingsRemand decision- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableNot shown unpatentableMixed
“Accordingly, for the same reasons expressed by our previous decision addressing claim 8 of the ’085 patent, and the court’s analysis in Stryker, we conclude that Slater does not anticipate claims 2–5, 11, 12, 17, and 18 of the ’716 patent because Slater deliberately describes a variable angle hole that lacks a single predetermined angle—that is, Slater describes a transfixation screw hole that does not have a central axis defining the trajectory.” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“In its Petition, Petitioner contends that Weaver discloses the limitations in claim 6 and that it would have been obvious to add Weaver’s features to Slater’s plate to provide a more secure fixation between the screws and the plate. Pet. 36–39; Ex. 1002 ¶¶ 188–196. Specifically, Petitioner contends that configuring Slater’s transfixation screw hole (claim 6) or at least one of Slater’s attachment points (claim 8) as a threaded screw hole to lockably engage the head of a locking screw would have been an obvious design choice “because locking screws ‘provide a high resistance to shear or torsional forces’ and reduce the incidence of screw loosening.” Pet. 39 (quoting Ex. 1009, 1:57–58); Ex. 1009, 1:46–48; Ex. 1002 ¶¶ 191– 196. Petitioner otherwise relies on its anticipation analysis for claim 1 discussed above. Pet. 36.” slip op. at 18
Patent outcomesUS 9,763,716 mixed§ 102 anticipation§ 103 obviousnessPatents in suitUS 9,763,716 - Stryker Corporation / Wright Medical Technology, Inc. v. Osteomed LLCSome claims unpatentablePTAB · May 4, 2026 · IPR2021-01450 · APJ Sheridan K Snedden · IPR · Remand
On remand, claims 6, 8–10, 14, and 17 are unpatentable; claims 2–5, 12, and 13 were not shown unpatentable, based on anticipation by Slater and obviousness over Slater and Weaver.
RulingsRemand decision- RemandMixed
“Appeals for the Federal Circuit. The court issued its decision in Stryker Corp. v. OsteoMed LLC, No. 2023-1925, 2025 WL 2814019 (Fed. Cir. Oct. 3, 2025) (“Stryker”) (Paper 49),1 affirming-in-part, reversing-in-part, vacating and remanding-in-part our Final Written Decision (Paper 46) for further proceedings. In its opinion, the Federal Circuit reversed our finding of no anticipation as to independent claims 1 and 11 of U.S. Patent No. 8,529,608 B2 (“the ’608 patent,” Ex. 1001), and vacated and remanded for further proceedings to evaluate whether dependent claims 2–6, 8–10, 12–14, and 17 (the “Remanded Claims”) are similarly unpatentable in view of Petitioner’s challenges relying on the Slater reference. Stryker, slip op. at 14–15. We have jurisdiction under 35 U.S.C. § 6. We issue this Final Written Decision on Remand pursuant to 35 U.S.C. §§ 144, 318 and 37 C.F.R. § 42.73 in an inter partes review involving Stryker Corporation and Wright Medical Technology, Inc. (collectively, “Petitioner”) and OsteoMed LLC (“Patent Owner”). For the reasons discussed below, after considering the entirety of the record in light of the Federal Circuit’s directives in Stryker, we find by a preponderance of the evidence that claims 6, 8–10, 14, and 17 are unpatentable. We also conclude that Petitioner has not demonstrated, by a preponderance of the evidence, that claims 2–5, 12, and 13 are unpatentable.” slip op. at 2
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableNot shown unpatentableMixed
“Accordingly, for the same reasons expressed by our previous decision addressing claim 8 of the ’085 patent, and the court’s analysis in Stryker, we conclude that Slater does not anticipate claims 2–5, 12, and 13 of the ’608 patent because Slater deliberately describes a variable angle hole that lacks a single predetermined angle—that is, Slater describes a transfixation screw hole that does not have a central axis defining the trajectory.” slip op. at 13
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“limitations in claim 6 and that it would have been obvious to add Weaver’s features to Slater’s plate to provide a more secure fixation between the screws and the plate. Pet. 37–39; Ex. 1002 ¶¶ 161–169. Specifically, Petitioner contends that configuring Slater’s transfixation screw hole (claim 6) or at least one of Slater’s attachment points (claim 8) as a threaded screw hole to lockably engage the head of a locking screw would have been an obvious design choice “because locking screws ‘provide a high resistance to shear or torsional forces’ and reduce the incidence of screw loosening.” Pet. 39 (quoting Ex. 1009, 1:57–58); Ex. 1009, 1:46–48; Ex. 1002 ¶¶ 162– 163. Petitioner otherwise relies on its anticipation analysis for claim 1 discussed above. Pet. 37. Patent Owner raised no separate argument regarding the patentability of claims 6 and 8, instead relying solely on its argument that Slater does not anticipate independent claim 1, on which claims 6 and 8 depend. PO Resp. 46; Reply 4 (“Patent Owner does not challenge the combination of Slater and Weaver for claims 6 and 8.”). We have reviewed Petitioner’s arguments and evidence as to the undisputed limitations of claims 6 and 8 and find that Petitioner establishes that the combination of Slater and Weaver discloses all of the limitations of claims 6 and 8, and that one of ordinary skill in the art would have been motivated to combine Slater and Weaver for the reasons provided by Petitioner. We adopt Petitioner’s arguments and evidence as to these limitations as our own. See Pet. 37–39.” slip op. at 19
Patent outcomesUS 8,529,608 mixed§ 102 anticipation§ 103 obviousnessPatents in suitUS 8,529,608 - Stryker Corporation / Wright Medical Technology, Inc. v. Osteomed LLCSome claims unpatentablePTAB · May 4, 2026 · IPR2021-01451 · APJ Sheridan K Snedden · IPR · Remand
On remand, claims 6, 8, 9, and 13 were held unpatentable; claims 2–5, 11, and 12 were not shown unpatentable because Slater lacks the claimed central axis.
RulingsRemand decision- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableUnpatentableMixed
“addressing the ’085 patent and by the court’s analysis in Stryker, we conclude that Slater does not anticipate claims 2–5, 11, and 12 of the ’776 patent because Slater deliberately describes a variable angle hole that lacks a single predetermined angle—that is, Slater describes a transfixation screw hole that does not have a central axis defining the trajectory.” slip op. at 13
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“In its Petition, Petitioner contends that Weaver discloses the limitations in claim 6 and that it would have been obvious to add Weaver’s features to Slater’s plate to provide a more secure fixation between the screws and the plate. Pet. 36–39; Ex. 1002 ¶¶ 169–74. Specifically, Petitioner contends that configuring Slater’s transfixation screw hole (claim 6) or at least one of Slater’s attachment points (claim 8) as a threaded screw hole to lockably engage the head of a locking screw would have been an obvious design choice “because locking screws ‘provide a high resistance to shear or torsional forces’ and reduce the incidence of screw loosening.” Pet. 39 (quoting Ex. 1009, 1:57–58); Ex. 1009, 1:46–48; Ex. 1002 ¶¶ 169– 74. Petitioner otherwise relies on its anticipation analysis for claim 1 discussed above. Pet. 36.” slip op. at 17
- RemandOther
“Appeals for the Federal Circuit. The court issued its decision in Stryker Corp. v. OsteoMed LLC, No. 2023-1925, 2025 WL 2814019 (Fed. Cir. Oct. 3, 2025) (“Stryker”) (Paper 49),1 affirming-in-part, reversing-in-part, vacating and remanding-in-part our Final Written Decision (Paper 46, “FWD”) for further proceedings. In its opinion, the Federal Circuit reversed our finding of no anticipation as to independent claims 1 and 10 of U.S. Patent 9,351,776 B2 (“the ’776 patent,” Ex. 1001), and vacated and remanded for further proceedings to evaluate whether dependent claims 2–6 and 8, 9 and 11–13 (the “Remanded Claims”) are unpatentable in view of Petitioner’s challenges relying on the Slater reference. Stryker, slip op. 14– 15.” slip op. at 2
Patent outcomesUS 9,351,776 mixed§ 102 anticipation§ 103 obviousnessPatents in suitUS 9,351,776 - Western Digital Technologies, Inc. v. Godo Kaisha IP Bridge 1Some claims unpatentablePTAB · Apr 29, 2026 · IPR2024-01493 · APJ John D Hamann · IPR · Final written decision
Claims 1, 3, 5, 7–11, 14, and 15 are unpatentable as obvious; claims 2, 4, 6, 12, and 13 were not shown unpatentable because the references did not establish entirely crystallized CoFeB layers.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“In our Decision on Institution, we adopted the definition Petitioner proposes for one having ordinary skill in the art at the time of the invention of the ’167 patent. Dec. on Inst. 6. Namely, we found that one of ordinary skill in the art would have had “a Ph.D. in electrical engineering, physics, materials science, or a related field, and at least one year of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent,” or “a Master’s degree in electrical engineering, physics, materials science, or a related field, and four years of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent.” Id. (citing Pet. 20 (citing Ex. 1024 ¶ 25)). We also found that “[l]ess work experience may be compensated by a higher level of relevant education, and vice versa.” Id. Patent Owner does not address Petitioner’s definition, nor provide its own. See generally PO Resp. Because Petitioner’s definition of the level of skill in the art is consistent with the ’167 patent and the asserted prior art, we maintain it for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC, 57 F.3d at 1579; In re Oelrich, 579 F.2d 86, 91 (CCPA 1978).” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner
“Here, neither party sets forth any term for claim construction. Pet. 17; see generally PO Resp. Thus, for purposes of this Decision, we afford the claim terms their plain and ordinary meaning. See, e.g., Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’”)).” slip op. at 8
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“In addition, we agree with Petitioner and find that one of ordinary skill in the art “would have been motivated to replace either or both of Bowen’s electrodes with CoFeB to increase TMR and lower Hf [(coupling field)] and Hc [(coercivity)].” Pet. 24, 27; Ex. 1055,30 2270 (“[I]t is natural to replace both the free and pinned layers to CoFeB to further increase the TMR value.”); Ex. 105631 ¶¶ 67–68 (“[B]oth the ferromagnetic layers 5, 7 are made of an FeCoB”32 for “improvement of the TMR ratio.”); Ex. 1024 ¶¶ 129, 132. We credit Dr. Bokor’s cited testimony as it is consistent with the cited evidence. Moreover, as Petitioner explains, “[r]esearchers were . . . interested in optimizing MTJs to improve MRAM performance,” and “[h]igher TMRs long promised improved performance for MRAM.” Pet. 6 30 Dexin Wang et al., 70% TMR at room temperature for SDT sandwich junctions with CoFeB as free and reference layers, 40 IEEE Trans. Magn. 2269–71 (July 2004). 31 US 2004/0136232 A1, published July 15, 2004, to Hosomi. 32 We find persuasive Dr. Bokor’s testimony that “a skilled artisan [would have] understood that CoFeB and FeCoB refer to the same alloy.” Ex. 1024 ¶ 121. 36–44) (emphasis omitted). In addition, we agree with Petitioner that one of ordinary skill in the art “would have found it obvious to use Parkin’s CoFeB layer in place of Bowen’s electrodes to increase TMR” in light of Parkin’s explicit teachings. Pet. 27; Ex. 1024 ¶ 133. In particular, Parkin explicitly teaches that “very high TMR values are unexpectedly found for MTJs with highly textured (100) MgO tunnel barriers but with nominally amorphous storage layers.” Ex. 1062, 18:49–51. Notably, Parkin provides that “[t]he TMR of the device of F[igure] 3A is nearly two times higher than the highest TMR ever reported in prior art devices using conventional alumina tunnel barriers.” Id. at 18:63–65; Pet. 27. And as we discuss above, Parkin teaches that Figure 3A’s MTJ may be inverted, such that the storage layer is formed beneath the tunnel barrier. Ex. 1062, 17:7–10. In addition, we agree that one of ordinary skill in the art would have had a reasonable expectation of success in modifying Bowen in the manner Petitioner proposes, as forming electrodes with CoFeB alloys was known. Pet. 28. As Petitioner argues, “forming electrodes with CoFeB alloys in MTJs was known and had been successfully done,” and thus we are persuaded that “one of skill would have found it to be a straightforward, predictable, and desirable improvement to TMR, Hf, and Hc in Bowen’s” slip op. at 21
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner
“We find unavailing Patent Owner’s arguments that Bowen teaches a “radically different manufacturing process[] from the claimed invention,” and that Bowen “went to heroic lengths to provide a crystalline (001) bottom electrode that provides a template for epitaxially growing a crystalline MgO(001) layer.” PO Resp. 2 (emphasis omitted). Patent Owner describes in detail Bowen’s specific manufacturing process, including the specific structure of the MTJ manufactured, and argues the claimed invention differs. PO Resp. 30–33. These arguments are inapposite. Petitioner cites the specific teachings Petitioner relies on from Bowen, rather than adopting the entirety of Bowen’s process or MTJ. See, e.g., Pet. 21–36 (citing the portions of Bowen—that in combination with Parkin—teach claim 1). Petitioner is not “compelled to adopt every single aspect of [Bowen’s] teaching without the exercise of independent judgment.” Lear Siegler, Inc. v. Aeroquip Corp., 733 F.2d 881, 889 (Fed. Cir. 1984). We also find unavailing Patent Owner’s argument that Bowen and Parkin each teach away from Petitioner’s combination because Parkin used boron to avoid crystalline electrodes whereas Bowen tried to achieve perfect crystalline electrodes. PO Resp. 4. As we discuss above, one of ordinary skill in the art would have been motivated to replace Bowen’s electrodes with CoFeB to increase TMR. And Patent Owner does not identify in either reference a specific teaching that criticizes, discredits, or otherwise 35 M. Jimbo et al., Thermal stability of spin valves using amorphous CoFeB, 165 J. Magnetism & Magnetic Materials 308–11 (1997) (“Jimbo”). combination. In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004).” slip op. at 23
Patent outcomesUS 10,680,167 mixedClaim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 10,680,167 - Western Digital Technologies, Inc. v. Godo Kaisha IP Bridge 1No claims unpatentablePTAB · Apr 28, 2026 · IPR2024-01494 · APJ Justin T Arbes · IPR · Final written decision
The Board found claims 5, 6, and 9–20 not shown unpatentable over either Bowen and Soukup or Nagahama and Soukup under § 103.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner argues that at the time of the ’909 patent (2004), a person of ordinary skill in the art would have had “a Ph.D. in electrical engineering, physics, materials science, or a related field, and at least one year of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent,” or “a Master’s degree in electrical engineering, physics, materials science, or a related field, and four years of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent,” where “[l]ess work experience may be compensated by a higher level of relevant education, and vice versa.” Pet. 18–19. In the Decision on Institution, we agreed with and applied Petitioner’s proposed definition. Dec. on Inst. 9. Patent Owner does not propose a different level of ordinary skill in the art in its Response. Both experts utilized Petitioner’s proposed definition. See Ex. 1024 ¶ 25; Ex. 2053 ¶¶ 29–30. Based on the full record developed during trial, including our review of the ’909 patent and the types of problems and solutions described in the ’909 patent and cited prior art, we maintain the previously adopted definition of the level of ordinary skill in the art and apply it for purposes of this Decision.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“B. Claim Interpretation We interpret the claims of the challenged patent using the same claim construction standard that would be used to construe the [claims] in a civil action under 35 U.S.C. 282(b), including construing the [claims] in accordance with the ordinary and customary meaning of such [claims] as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent. 37 C.F.R. § 42.100(b). Petitioner argues that “the claim terms should be given their plain and ordinary meaning and no claim construction is necessary.” Pet. 15. We did not interpret any terms in the Decision on Institution. Dec. on Inst. 9–10. Patent Owner does not propose interpretations of any claim terms in its Response. We conclude, based on the full trial record, that no term requires express interpretation to determine whether Petitioner has met its burden to prove unpatentability of the challenged claims. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“Because we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy,’ we need not construe [a particular claim limitation] where the construction is not ‘material to the . . . dispute.’” (emphasis added) (citation omitted)).” slip op. at 8
- Strike new argumentNew argument disregardedGranted in part
“Pursuant to 37 C.F.R. § 42.23(b), “[a] reply may only respond to arguments raised in the corresponding . . . patent owner response.” “‘Respond,’ in the context of 37 C.F.R. § 42.23(b), does not mean proceed in a new direction with a new approach as compared to the positions taken in a prior filing.” Patent Trial and Appeal Board Trial Practice Guide § II.I, available at https://www.uspto.gov/patents/ptab/trial-practice-guide (last updated Dec. 12, 2025). “While replies . . . can help crystalize issues for decision, a reply . . . that raises a new issue or belatedly presents evidence may not be considered.” Id. An indication that a new issue is improperly raised in a reply is where a petitioner submits “new evidence necessary to make out a prima facie case” of unpatentability, such as a “newly raised rationale to combine the prior art references that was not expressed in the petition.” Id. That is the case here. Petitioner’s rationale in the Petition for why a person of ordinary skill in the art would have been motivated to lower Bowen’s 0.9 eV barrier height to 0.33 eV based on Soukup was that such an artisan would have expected lowering the barrier height to increase TMR. See Pet. 34–36. Faced with Dr. Bokor’s testimony on cross-examination, Petitioner presents a new theory in its Reply that a person of ordinary skill in the art would not have known what impact lowering the barrier height would have (increase TMR, decrease it, or have no impact at all), but would have expected it to change in some “uncertain” way, which is a “legally sufficient motivation” in Petitioner’s view. See Reply 6–10, 13–16, 23–25. In other words, “[r]ather than explaining how its original” position that lowering barrier height would increase TMR “was correct,” Petitioner articulated “an entirely new theory . . . absent from the [P]etition” after Patent Owner cross-examined Dr. Bokor and “pointed out the flaws of [Petitioner’s] position” in its Response. See Wasica Finance GmbH v. Continental Auto. Sys., Inc., 853 F.3d 1272, 1286 (Fed. Cir. 2017). “Shifting arguments in this fashion is foreclosed by statute, [Federal Circuit] precedent, and Board guidelines.” Id.” slip op. at 20
- Expert testimonyPetitioner expert discountedPatent owner expert creditedDecided for patent owner
“Ultimately, the cross-examination testimony above is inconsistent with Dr. Bokor’s opinions in his declaration that, for example, “[i]t was understood to one of skill that lowering the barrier height to increase tunneling would have increased the TMR,” and “[o]ne of skill would have been motivated to adjust oxygen vacancy defects to improve TMR by lowering the barrier height.” See Ex. 1024 ¶¶ 176, 277 (emphasis added); see also id. ¶ 172 (“[O]ne of skill in the art would have been motivated to use [Soukup’s 0.33 eV] or similar height in an MgO MTJ to improve tunneling and hence TMR in Bowen.”). Accordingly, we do not find Dr. Bokor’s declaration testimony regarding a motivation to lower Bowen’s barrier height credible. It is Petitioner’s burden to provide a reasoned, evidence-supported explanation for why a person of ordinary skill in the art would have been motivated to lower Bowen’s 0.9 eV barrier height to 0.33 eV as disclosed in Soukup. See NuVasive, 842 F.3d at 1383; Magnum Oil, 829 F.3d at 1380; TriVascular, 812 F.3d at 1066. Petitioner’s reasoning in the Petition that lowering the barrier height (by introducing oxygen defects) would increase TMR is unsupported by evidence.” slip op. at 31
Patent outcomesUS 11,968,909 not shown unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,968,909
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.