- Canon U.S.A., Inc. / Canon Inc. v. Slingshot Printing LLCAll claims unpatentablePTAB · May 20, 2024 · IPR2022-01541 · APJ Jon B Tornquist · IPR · Final written decision
Claims 1–7, 9, 10, 20–22, and 24 are unpatentable as obvious over Hamafuku, Whitman, and Imanaka, with Cleland added for claim 5.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Upon review of the prior art of record, we determine that no claim terms require construction for purposes of this Final Written Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 11
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Upon review of the prior art of record, we adopt Petitioner’s definition of a person of ordinary skill in the art as it is consistent with the prior art of record, but note that neither party contends the outcome of this case depends on whether a person of ordinary skill could include an individual with a degree in Materials Science.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“In this case, there was a known desire to increase nozzle pitch in inkjet printheads, Imanaka’s heater and nozzle configuration had been used in the art to achieve this goal, and there is no suggestion that combining the teachings of Hamafuku, Whitman, and Imanaka was beyond the skill of an ordinarily skilled artisan. See Intel Corp. v. PACT XPP Schweiz AG, 61 F.4th 1373, 1381 (Fed. Cir. 2023). Thus, we credit the testimony of Mr. Curley that one of ordinary skill in the art would have sought to use Imanaka’s heater and nozzle pitch in Hamafuku in order to provide a more compact and higher density printhead. Ex. 1002 ¶¶ 404–05. A conclusion of obviousness requires a reasonable expectation of success. Intelligent Bio-Systems, Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1365 (Fed. Cir. 2016). This inquiry asks whether one of ordinary skill in the art would have had a reasonable expectation of combining the references to achieve what is claimed in the patent-at-issue. Id. at 1367. The inquiry does not look to whether unclaimed elements or functions would or would not also be achieved, or whether “one would reasonably expect the prior art reference to operate as those references intended once combined.” Id.” slip op. at 42
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner
“As noted by Patent Owner, the components of Imanaka are made of silicon-based materials, manufactured using thin film technology. PO Resp. 53–54 (citing Ex. 1008, 6:50–61). We are not persuaded, however, that Imanaka’s preference for silicon-based materials would teach away from, or otherwise discourage, one of ordinary skill in the art from combining Hamafuku, Whitman, and Imanaka. Imanaka does not suggest that failure to use silicon-based materials would result in an inoperable device. Rather, Imanaka states that use of silicon-based materials may “improve the mechanical characteristics” and “reliability” of “the liquid discharge head.” Ex. 1008, 6:50–61. Given the considerable increase in printhead nozzle pitch and print resolution provided by Imanaka’s heater and nozzle pitch configuration, we are not persuaded that a failure to capture the same improvement in mechanical characteristics and reliability from the use of silicon-based materials would prevent one of ordinary skill in the art from implementing Imanaka’s nozzle pitch in Hamafuku and Whitman or counsel against this modification.” slip op. at 41
Patent outcomesUS 7,152,951 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,152,951 - NXP USA, Inc. v. Bell Semiconductor, LLCInstitution deniedPTAB · May 13, 2024 · IPR2024-00167 · APJ Jeffrey W Abraham · IPR · Institution
The Board denied institution because Petitioner failed to show a reasonable likelihood that any challenged claim was unpatentable over the asserted anticipation and obviousness grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Upon consideration of the Petition, the Preliminary Response, and the evidence presented, we determine that Petitioner has not demonstrated a reasonable likelihood that it will prevail in showing that at least one of the challenged claims is unpatentable. Accordingly, we do not institute an inter partes review of any challenged claim based on any ground asserted in the Petition. IV. ORDER For the reasons given, it is: ORDERED that, pursuant to 35 U.S.C. § 314, the Petition is denied, and no inter partes review is instituted.” slip op. at 22
- BurdenDecided for patent owner
“For all of the foregoing reasons, Petitioner has failed to demonstrate sufficiently that Okabe discloses a semiconductor integrated circuit package with a first layer that includes “a first ground plane enabling electrical connection with low speed electronic circuitry” and a “second ground plane enabling electrical connection with high speed electronic circuitry.” Ex. 1001, 9:25–36.” slip op. at 16
- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner asserts that a person of ordinary skill in the art would have had a “bachelor’s degree in a field relating to the integrated circuit package manufacturing process like materials science, physics, electrical engineering, or other related subjects, and at least two to three years of experience with fabrication and packaging of integrated circuits.” Pet. 4 (citing Ex. 1002 Preliminary Response. Prelim. Resp. 7. In light of the record before us, and for purposes of this Decision, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art.” slip op. at 7
- Expert testimonyPetitioner expert discountedDecided for patent owner
“Petitioner’s arguments are not persuasive. As Patent Owner and Dr. Bernstein point out, Petitioner does not specify the frequencies at which duplexer 45 and VCO 70 operate in Okabe. Prelim. Resp. 20; Ex. 2001 ¶ 79. Nor does Petitioner direct us to any criteria for classifying circuitry as “high speed” or “low speed.” Prelim. Resp. 20; Ex. 2001 ¶ 79. As a result, we are left with only the assertion of what a person of ordinary skill in the art would have understood about duplexer 45 and VCO 70. To support this assertion, Petitioner directs us to statements in Dr. Baker’s declaration that mirror the Petition. Pet. 26–27 (citing Ex. 1002 ¶¶ 71–73). Dr. Baker, however, does not cite to any supporting evidence or provide any technical reasoning to support his statements. Ex. 1002 ¶¶ 71–73. “Thus, the cited declaration testimony is conclusory and unsupported, adds little to the conclusory assertion for which it is offered to support, and is entitled to little weight.” Xerox Corp. v. Bytemark Inc., IPR2022-00624, Paper 9 at 15 (August 24, 2022) (precedential); see also 37 C.F.R. § 42.65(a) (“Expert testimony that does not disclose the underlying facts or data on which the opinion is based is entitled to little or no weight.”). Accordingly, Petitioner has failed to demonstrate sufficiently that Okabe discloses a second layer that includes a “third ground plane configured for electrical connection with low speed electronic circuitry” and a “fourth ground plane configured for electrical connection with high speed electronic circuitry.” Ex. 1001, 9:37– 43.” slip op. at 17
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,646,091 - Infineon Technologies AG v. Amatech Group LimitedRehearing grantedPTAB · Apr 3, 2024 · IPR2022-00951 · APJ Stacey G White · IPR · Rehearing
On rehearing, the Board held claim 3 unpatentable as obvious over Eray-WO799, revising the final written decision’s outcome for that claim.
RulingsRehearing decision- RehearingRehearing, grantedGranted
“unrebutted expert testimony corroborated by two prior art patents describing RFID smart cards” and that this evidence “demonstrated that a conventional and obvious way to manufacture Eray-WO799’s smart card was by forming a card antenna on a card body before adding the chip.” Req. Reh’g 2 (citing Pet. 39–40; Paper 20 (“Reply”) at 31). Thus, Petitioner argues a person of ordinary skill in the art would have understood that an obvious and conventional way of manufacturing the card body of Eray- WO799 would have had unconnected ends as required by our construction. Id. Paragraph 149 of Dr. van der Weide’s declaration states that a person of ordinary skill in the art “would have understood that an obvious and conventional way to construct the smart card as shown in Eray-WO799 FIG. 12 would have been to form the turns S1, S2, SC3 and SC4 on or in the card body (e.g., by laying wire) before connecting the wire to (or forming) access terminals and connecting module M.” Ex. 1003 ¶ 149. In support of that because it was “directed to solving problems that occur during the manufacture of cards.” Dec. 42 (citing Ex. 1028, 1:25–2:53). Petitioner points out that “[w]hile Ryu discloses manufacturing techniques, Ryu also describes and claims a ‘communication system’ with a smart card and a reader.” Reh’g Req. 9 (citing Ex. 1028, code (57), claims 1–2). Petitioner is correct in noting that Ryu’s disclosures are not so narrow as we described in the Decision. As to Finn-089, we found that reference unhelpful because it was “directed to a process for the contacting of a wire conductor in the course of manufacture of a transponder unit.” Dec. 41–42 (citing Ex. 1015, 1:15–17). Petitioner asserts that we failed to acknowledge to the fact that Finn-089 was incorporated by reference in the ’240 patent noting that “[p]atents incorporated by reference ‘are effectively part of the host [patents] as if [they] were explicitly contained therein.’” Reh’g Req. 9 (citing X2Y Attenuators, LLC v. U.S. Int’l Trade Comm’n, 757 F.3d 1358, 1362–63 (Fed. Cir. 2014) (alterations in Rehearing Request)). On this record, we agree that we overlooked and misapprehended the import of Ryu and Finn-089 and if those references are given appropriate weight, they lend further credence to Dr. van der Weide’s testimony that one of ordinary skill in the art would have known that an obvious way to manufacture Eray-WO799 would have created an intermediate product with requisite free ends. Further, we adopt the full reasoning stated in the Dissent as to the unpatentability of claim 3 (Dec. 53–57). Therefore, we GRANT Petitioner’s Request for Rehearing slip op. at 6
- Skill levelSkill level petitioner adoptedOther
“As stated in our Final Written Decision, we adopted Petitioner’s definition of the person of ordinary skill in the art and found that the person of ordinary skill in the art would have possessed “a Bachelor’s degree in electrical engineering or a similar field, and 1–2 years of experience researching and developing antennas used in RFID applications.” Dec. 6–7 (citing Pet. 8; PO Resp. 18). Petitioner’s declarant, Dr. Daniel van der Weide, supported Petitioner’s definition, which was adopted for this proceeding. Ex. 1003 ¶ 25. Dr. van der Weide defined himself as “a person of more than ordinary skill in the art during the relevant timeframe” because “[b]y 2010, [he] held a Ph.D. in electrical engineering, and [he] had at least” slip op. at 4
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable
“unrebutted expert testimony corroborated by two prior art patents describing RFID smart cards” and that this evidence “demonstrated that a conventional and obvious way to manufacture Eray-WO799’s smart card was by forming a card antenna on a card body before adding the chip.” Req. Reh’g 2 (citing Pet. 39–40; Paper 20 (“Reply”) at 31). Thus, Petitioner argues a person of ordinary skill in the art would have understood that an obvious and conventional way of manufacturing the card body of Eray- WO799 would have had unconnected ends as required by our construction. Id. Paragraph 149 of Dr. van der Weide’s declaration states that a person of ordinary skill in the art “would have understood that an obvious and conventional way to construct the smart card as shown in Eray-WO799 FIG. 12 would have been to form the turns S1, S2, SC3 and SC4 on or in the card body (e.g., by laying wire) before connecting the wire to (or forming) access terminals and connecting module M.” Ex. 1003 ¶ 149. In support of that because it was “directed to solving problems that occur during the manufacture of cards.” Dec. 42 (citing Ex. 1028, 1:25–2:53). Petitioner points out that “[w]hile Ryu discloses manufacturing techniques, Ryu also describes and claims a ‘communication system’ with a smart card and a reader.” Reh’g Req. 9 (citing Ex. 1028, code (57), claims 1–2). Petitioner is correct in noting that Ryu’s disclosures are not so narrow as we described in the Decision. As to Finn-089, we found that reference unhelpful because it was “directed to a process for the contacting of a wire conductor in the course of manufacture of a transponder unit.” Dec. 41–42 (citing Ex. 1015, 1:15–17). Petitioner asserts that we failed to acknowledge to the fact that Finn-089 was incorporated by reference in the ’240 patent noting that “[p]atents incorporated by reference ‘are effectively part of the host [patents] as if [they] were explicitly contained therein.’” Reh’g Req. 9 (citing X2Y Attenuators, LLC v. U.S. Int’l Trade Comm’n, 757 F.3d 1358, 1362–63 (Fed. Cir. 2014) (alterations in Rehearing Request)). On this record, we agree that we overlooked and misapprehended the import of Ryu and Finn-089 and if those references are given appropriate weight, they lend further credence to Dr. van der Weide’s testimony that one of ordinary skill in the art would have known that an obvious way to manufacture Eray-WO799 would have created an intermediate product with requisite free ends. Further, we adopt the full reasoning stated in the Dissent as to the unpatentability of claim 3 (Dec. 53–57). Therefore, we GRANT Petitioner’s Request for Rehearing slip op. at 6
§ 103 obviousnessPatents in suitUS 9,165,240 - PTAB · Mar 26, 2024 · IPR2023-01384 · APJ Jeffrey W Abraham · IPR · Institution
The Board instituted IPR on claims 1–7 and all petitioned grounds, finding a reasonable likelihood that claims 1, 3, and 4 are unpatentable over the asserted obviousness grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“III. CONCLUSION Because Petitioner has demonstrated a reasonable likelihood that at least one challenged claim of the ’335 patent is unpatentable over the prior art of record, we institute an inter partes review of all challenged claims. And because we find some grounds sufficient for institution, we institute on all grounds in the petition. See SAS, 138 S. Ct. at 1353 (2018); PGS Geophysical, 891 F.3d at 1360. determination with respect to the patentability of any challenged claim or any underlying factual or legal issue, including claim construction. IV. ORDER For the reasons given, it is: ORDERED that, pursuant to 35 U.S.C. § 314(a), an inter partes review of claims 1–7 of the ’335 patent is instituted with respect to all grounds of unpatentability asserted in the Petition, commencing on the entry date of this Decision; and FURTHER ORDERED that, pursuant to 35 U.S.C. § 314(c) and 37 C.F.R. § 42.4, notice is hereby given of the institution of trial.” slip op. at 54
- Skill levelSkill level petitioner adoptedDecided for petitioner
“II. ANALYSIS A. Level of Ordinary Skill in the Art Petitioner asserts that a person of ordinary skill in the art would have had “at least a four-year degree in electrical engineering, chemical engineering, physics, or material science or a closely related field, and at least two years of experience in semiconductor device design and/or 1 The relevant sections of the Leahy-Smith America Invents Act (“AIA”), Pub. L. No. 112–29, took effect on March 16, 2013. Because the ’335 patent has an effective filing date prior to the effective date of the applicable AIA amendments, the pre-AIA version of § 103 applies. 2 US 2006/0108606 A1, published May 25, 2006 (Ex. 1007). 3 JP H11-261053, published Sept. 24, 1999 (Ex. 1005 (original language); Ex. 1006 (certified English translation)). 4 US 2007/0007547 A1, published Jan. 11, 2007 (Ex. 1008). 5 R.V. Shenoy, et. al, Effect of Mask Wall Angle on Shape Evolution during Through-Mask Electrochemical Micromachining, J. ELECTROCHEM. SOC., Vol. 143, No. 2, 544, Feb. 1996 (Ex. 1013). device operation, or the development of new device topologies.” Pet. 18 (citing Ex. 1003 ¶¶ 52–53). Petitioner also contends that “[a]dditional education could substitute for professional experience and vice versa.” Pet. 18. Patent Owner does not challenge Petitioner’s definition or offer its own. See generally Prelim. Resp. In light of the record before us, and for purposes of this Decision, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’335 patent and the prior art of record, at this stage of the proceeding we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand and implement the teachings of the ’335 patent and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown”) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)).” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“type gate material of independent claims 1 and 5 requires that the “bottom of the p-type gate material is more than 10% wider than the top of the material.” Pet. 19. We begin our analysis with the language of the claims themselves. See Phillips, 415 F.3d at 1312. Here, the claims do not recite 7 Patent Owner cites to the Lidow-508 patent itself, instead of the published application included in the record as Ex. 1011, which Petitioner cites to. The parties have not identified any difference between the two references. the bottom of the p-type gate material must be more than 10% wider than the top of the material. Ex. 1001, 5:5–6:30. Thus, the plain language of the claims themselves does not support Petitioner’s proposed construction.” slip op. at 13
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“As discussed above, however, we are persuaded, at this stage, by Petitioner’s argument that that Saxler teaches or suggests an operable enhancement-mode device. See § II.D.1.a.i, supra. Additionally, Patent Owner’s argument regarding modifications that “could be detrimental” to certain devices is not only speculation, but also comprised entirely of attorney argument. Finally, Patent Owner does not directly address Petitioner’s arguments and accompanying evidence that a person of ordinary skill in the art would have had reason to combine the teachings of Saxler and Yoshida to take advantage of simplified manufacturing steps and reduced costs. Based on the present record, Petitioner has sufficiently shown that Saxler and Yoshida disclose or suggest all of the limitations in claims 1, 3, and 4, and that a person of ordinary skill in the art would have had a reason to combine the teachings of Saxler and Yoshida with a reasonable expectation of success. Accordingly, we determine Petitioner has established a reasonable likelihood of prevailing on its challenge that claims 1, 3, and 4 are unpatentable as obvious in view of Saxler and Yoshida. For the same reasons as noted above, we decline to address Petitioner’s challenge of claims 2 and 5–7 based on Saxler and Yoshida alone at this stage. See § II.D.1.c, supra.” slip op. at 44
Claim construction§ 103 obviousnesscites PhillipsPatents in suitUS 10,312,335 - PTAB · Mar 20, 2024 · IPR2023-01381 · APJ Jon B Tornquist · IPR · Institution
Instituted IPR of claims 1–12 on all petition grounds; the Board found a reasonable likelihood of success on at least one challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“An inter partes review may not be instituted “unless . . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). Having considered the arguments and evidence presented by Petitioner and Patent Owner, we determine that the information presented in the Petition demonstrates a reasonable likelihood that Petitioner would prevail on at least one of the challenged claims of the ’294 patent. Accordingly, we institute an inter partes review as to all of the challenged claims of the ’294 patent on all of the grounds of unpatentability set forth in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends a person of ordinary skill in the art “would have possessed at least a four-year degree in electrical engineering, chemical engineering, physics, or material science, or a closely related field, and at least two years of experience in semiconductor device design or fabrication, including the processing of semiconductor materials, analysis of device operation, or the development of new device topologies.” Pet. 5–6. Patent Owner does not address the knowledge or education of a person of ordinary skill in the art. On this record, we adopt Petitioner’s unopposed definition of the person of ordinary skill in the art as it appears consistent with the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (holding that the prior art itself can reflect the appropriate level of ordinary skill in the art).” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“Petitioner contends the terms “compensated GaN layer” and “above” require construction. Pet. 12–17; Prelim. Reply 1–5. Patent Owner contends only the term “compensated GaN layer” requires construction. Prelim. Resp. 5–15; Prelim. Sur-reply 1–3. Upon review of the parties’ arguments and evidence, we determine that only the term “compensated GaN layer” requires construction. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“Claims Claim terms are generally given their ordinary and customary meaning, which is the “meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention.” Phillips, 415 F.3d at 1313. Patent Owner does not present evidence that the ordinary meaning in the art of a “GaN layer” is “GaN gate material.” Indeed, the prior art of record discloses multiple GaN layers that do not appear to be “gate material.” Ex. 1006 ¶ 32; Ex. 1005 ¶ 74 (“the channel layer 20 is GaN”); Ex. 1008 ¶¶ 24–25 (noting that the buffer layer and semiconductor layer are GaN). Nor does Patent Owner contend that the term “compensated” requires or implies a particular orientation or location with respect to the gate contact. Thus, by itself, the term “compensated GaN layer” does not require a “compensated GaN gate material.” Rather, Patent Owner contends that given the placement of the “compensated GaN layer” above the barrier layer and below the gate contact, one of ordinary skill in the art would have understood that the claimed “compensated GaN layer” is a “compensated GaN gate material.” Prelim. Resp. 7. We are not persuaded by this argument, at this stage of the proceeding, because the prior art (Uemoto) discloses a compensated GaN layer that is above a barrier layer and below a gate contact, as recited in claim 1, and Patent Owner contends this layer is not a “compensated GaN layer.” Ex. 1006, Fig. 7; Prelim. Resp. 31–32. This tends to suggest that the placement of a “compensated GaN layer” above a barrier layer and below a gate contact, without more, does not necessarily indicate that said layer is part of the gate. In view of the foregoing, on this record, we determine that the language and structure of claim 1 does not support a construction requiring that the “compensated GaN layer” be a “compensated GaN gate material.”” slip op. at 11
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,350,294 - Google LLC v. Geoscope Technologies Pte. Ltd.Institution deniedPTAB · Feb 20, 2024 · IPR2023-01214 · APJ Sheila F Mcshane · IPR · Institution
The Board denied institution because the Petition did not show a reasonable likelihood that any challenged claim was unpatentable over Almgren or Haartsen, alone or with other prior art.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Institution of an inter partes review is authorized by statute when “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). Upon consideration of the Petition, the Preliminary Response, the Petitioner Preliminary Reply, the Patent Owner Preliminary Sur-reply, and the evidence of record, we determine that Petitioner has not established a reasonable likelihood of prevailing with respect to the unpatentability of at least one claim of the ’264 patent. Accordingly, for the reasons that follow, we decline to institute inter partes review of claims 1, 3, 6, 11, 13, 15, 20, 21, 23, and 25–27 of the ’264 patent.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“In determining the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active 8 Petitioner asserts that Haartsen is prior art under § 102(b). Pet. 6. 9 US 5,491,837, filed March 7, 1994, issued February 13, 1996 (Ex. 1005, “Haartsen”). workers in the field.” In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (citation omitted). The level of ordinary skill in the art is also reflected by the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). We adopt the assessment offered by Petitioner, without the qualifier “at least” because its use introduces vagueness, for the purposes of this Decision because it is consistent with the ’264 patent and the asserted prior art.” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner
“Petitioner, however, argues that “[t]he phrase ‘without disabling any other communication channel’ encompasses not dedicating a specific frequency channel for measuring path loss.” Pet. 25; see also Ex. 1008 ¶ 124. That is, Petitioner’s position appears to be that the recited limitation could be sufficiently disclosed or met by prior art if it instead meets the different requirement of “not dedicating a specific frequency channel for measuring path loss.” We do not agree. For support, Petitioner cites portions of the ’264 patent Specification that discuss not dedicating specific frequency channels for measuring path loss. Pet. 25 (citing Ex. 1001, 1:58– 61, 3:39–45, 3:48–50, 4:60–63). Petitioner does not explain, however, why the term “without disabling any other communication channel” should be taught by this disclosure of this alternative requirement or, in other words, Petitioner does not explain why that term should encompass “not dedicating a specific frequency channel for measuring path loss.” Mr. William does not provide any additional explanation and merely repeats the statements of the Petition in a conclusory manner. Ex. 1008 ¶ 124. As discussed above, and as the parties agreed, we will proceed with the assessment of the merits using the plain meaning of the claim term “without disabling any other communication channel.”” slip op. at 15
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“claim limitations at issue, and, specifically, the burden extends to negative limitations such as “without disabling any other communication.” See IBM v. Iancu, 759 F. App’x 1002, 1011 (Fed. Cir. 2019) (explaining that a reference’s silence was not by itself sufficient to establish that the reference teaches a process involving only one user authentication action). Petitioner does not appear to dispute its required showing, that is, Petitioner does not argue that the absence of an element in the prior art is sufficient per se to satisfy a negative limitation. Rather, the Petition affirmatively asserts that Almgren discloses or teaches the limitation “without disabling any other communication.” Pet. 25–26. Petitioner, however, argues that “[t]he phrase ‘without disabling any other communication channel’ encompasses not dedicating a specific frequency channel for measuring path loss.” Pet. 25; see also Ex. 1008 ¶ 124. That is, Petitioner’s position appears to be that the recited limitation could be sufficiently disclosed or met by prior art if it instead meets the different requirement of “not dedicating a specific frequency channel for measuring path loss.” We do not agree. For support, Petitioner cites portions of the ’264 patent Specification that discuss not dedicating specific frequency channels for measuring path loss. Pet. 25 (citing Ex. 1001, 1:58– 61, 3:39–45, 3:48–50, 4:60–63). Petitioner does not explain, however, why the term “without disabling any other communication channel” should be taught by this disclosure of this alternative requirement or, in other words, Petitioner does not explain why that term should encompass “not dedicating a specific frequency channel for measuring path loss.” Mr. William does not provide any additional explanation and merely repeats the statements of the Petition in a conclusory manner. Ex. 1008 ¶ 124. As discussed above, and as the parties agreed, we will proceed with the assessment of the merits using the plain meaning of the claim term “without disabling any other communication channel.”” slip op. at 15
Claim construction§ 102 anticipation§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 8,320,264 - Mara Renewables Corporation v. DSM IP Assets, B.V.Institution deniedPTAB · Jan 25, 2024 · IPR2023-01167 · APJ Zhenyu Yang · IPR · Institution
The Board denied institution because the petition did not show a reasonable likelihood of prevailing on any challenged claim under the asserted obviousness grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“When asserting unpatentability under obviousness, the patent challenger must show a reasonable expectation of success, that is, “the likelihood of success in combining references to arrive at the claimed invention.” Intelligent Bio-Sys., Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1367 (Fed. Cir. 2016). Thus, “[t]he reasonable-expectationof-success analysis must be tied to the scope of the claimed invention.” Teva Pharms. USA, Inc. v. Corcept Therapeutics, Inc., 18 F.4th 1377, 1381 (Fed. Cir. 2021); Allergan, Inc. v. Apotex Inc., 754 F.3d 952, 966 (Fed. Cir. 2014) (holding the trial court’s failure to consider the appropriate scope of the claimed invention in evaluating the reasonable expectation of success constitutes a legal error). Relevant to our Decision here, claim 3 requires its microbial lipid to have, among others, at least 60% by weight DHA in the triglyceride fraction and an AV of 0.5 to 26.” slip op. at 10
- Skill levelSkill level petitioner adoptedDecided for petitioner
“For purposes of this Decision, we adopt Petitioner’s definition of the skill level because it is consistent with the prior art’s demonstration of the level of ordinary skill at the relevant time. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (holding that the prior art itself can reflect the appropriate level of ordinary skill in the art).” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached
“We emphasize that our finding is not on lack of reasonable expectation of success per se. Instead, we merely find neither the Petition nor the Curtis Declaration persuasively addresses “the expected differences in the oxidizability and oxidation rate—and their expected impact on anisidine values—of an oil containing 42% ARA (for which Schaap discloses limited experimental data) versus one containing 60% DHA in the triglyceride fraction (for which Schaap does not).” See id. at 27. In sum, we find Petitioner has not shown sufficiently that an ordinarily skilled artisan, based on the teachings of the asserted prior art, would have had a reasonable expectation of success for the appropriate scope of the claimed invention (that is, a microbial lipid having at least 60% DHA in the triglyceride fraction and an AV of 0.5 to 26). As a result, on this record, Petitioner has not established a reasonable likelihood that it would prevail in this challenge.” slip op. at 13
§ 103 obviousnesscites PhillipsPatents in suitUS 10,392,578 - Intel Corporation v. Besang Inc.InstitutedPTAB · Dec 13, 2023 · IPR2023-00991 · APJ Jon B Tornquist · IPR · Institution
The Board instituted review of claims 1 and 13–17 on all petition grounds, finding a reasonable likelihood of success on at least one challenge to claim 13 based on combinations involving Lee or Johnson.
RulingsInstitution decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther
“stackable add-on layer” requires something more than just any type of layer that is directly or indirectly adhered to the substrate or dielectric layer. First, the plain language of the claim does not require merely a “layer” having a plurality of vertically oriented semiconductor memory cells, but rather “a stackable add-on layer.” Ex. 1001, 12:29–32. Second, the written description of the ’702 patent strongly suggests that a “stackable add-on layer” is formed separately from the substrate and then stacked on and bonded to the substrate or a dielectric layer above the that in the invention “a plurality of vertically oriented semiconductor memory devices, or cells, may be added to a separately fabricated substrate that includes electrical devices and/or interconnect lines.” Id. at 1:47–50 (emphasis added). Likewise, the specification explains that an SOI layer refers to “a relatively thin, single crystal portion of a semiconductor wafer that can be cleaved and bonded to another previously fabricated wafer, or similar type of substrate.” Id. at 4:47–51. “In this context,” the ’702 patent explains, “the SOI layer may be thought of as an attachment layer, or stackable add-on structure which is suitable for bonding to a semiconductor substrate already containing devices and/or interconnections.” Id. at 4:53– 57. Again, this suggests that a “stackable add-on layer” is separately formed and then bonded to a previously fabricated substrate. Given the structure of the claims and the description of the invention in the written description of the ’702 patent, we preliminarily construe “stackable add-on layer” to be a layer that is formed separately from the substrate and then bonded to the substrate or a dielectric layer above the substrate. We do not understand a “stackable add-on layer” to include memory cells that are formed by sequential deposition on or above a substrate or dielectric layer without being added to a separately formed substrate. slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageTerm construed board ownOther
“Independent claims 1 and 13 do not specify how the stackable add-on layer is bonded to the dielectric layer. Nor does Petitioner assert that the plain and ordinary meaning of “bonding” refers to “wafer bonding.” Thus, to limit the claims to wafer bonding, Petitioner must identify a clear expression of intent in the ’702 patent to define “bonding” as “wafer bonding,” or a clear disavowal of claim scope demonstrating that non-wafer bonding methods are outside the reach of the claims. See Thorner v. Sony Comp. Entm’t Am. LLC, 669 F.3d 1362, 1365 (Fed. Cir. 2012). Petitioner does not contend that the patentee acted as its own lexicographer by defining “bonding” as “wafer bonding,” a term that does not even appear in the ’702 patent. Id. at 1365. Nor are we directed to any clear disavowal indicating that methods of bonding other than “wafer bonding” are outside the scope of the claims. Id. at 1366. Thus, we decline to construe “bonded” in claims 1 8 Wafer bonding is a method in which semiconductor layers are formed on separate wafers and then bonded together to create a stacked semiconductor structure. Ex. 1003 ¶ 41. that the standards for lexicography and disavowal are “exacting”). As noted by Petitioner, the ’702 patent describes an SOI layer that is wafer bonded to a previously fabricated substrate. Ex. 1001, 4:47–53. Independent claims 1 and 13, however, do not require an SOI layer, and the disclosure of a single embodiment in which wafer bonding is used is not sufficient to import such a limitation into the claims. See Deere & Co. v. Bush Hog, LLC, 703 F.3d 1349, 1354 (Fed. Cir. 2012) (“While claim terms are understood in light of the specification, a claim construction must not import limitations from the specification into the claims.”); Computer Docking Station Corp. v. Dell, Inc., 519 F.3d 1366, 1374 (Fed. Cir. 2008) (“Nonetheless, this court will not countenance the importation of claim limitations from a few specification statements or figures into the claims.”). In summary, we preliminarily construe “stackable add-on layer . . . the first stackable add-on layer is/being bonded” to require a separate layer that is formed apart from the substrate and then subsequently bonded to the substrate or a dielectric layer above the substrate.9 We do not construe independent claims 1 or 13 to require any particular form or method of bonding.10” slip op. at 10
- PTAB / AIA Trials › Discretionary denial › General Plastic (serial petitions)Decided for petitioner
“The evidence of record demonstrates that Petitioner and Micron jointly developed the 3D NAND technology that is generally at issue in the district court litigation, and the parties have acknowledged “their long-term joint development partnership” for this technology. Ex. 1013 (district court complaint); Ex. 2010 (“Micron and Intel Extend their Leadership in 3D NAND Flash memory.”); Ex. 2016 (discussing the end of Intel’s and Micron’s NAND partnership). There is no assertion, however, that all 3D NAND technology infringes the challenged claims of the ’702 patent, and Micron and Intel are not accused of infringing the ’702 patent based on the same products and are not co-defendants in any district court litigation. Further, Patent Owner presents no persuasive evidence that the two parties collaborated on the development of either of the accused products, as opposed to general 3D NAND technology, and Petitioner represents that the two parties filed their petitions independently and without coordination or cooperation. Prelim. Reply 1–2; Ex. 2016, 1 (noting that each company sought to independently develop 3D NAND technology in order to “forge” their own path for future NAND development and “better optimize the technology and products for their individual business needs”). relationship between Petitioner and Micron, and Petitioner is not the same petitioner as the petitioner in IPR2023-00900. Thus, General Plastic factor 1 weighs against discretionary denial.” slip op. at 14
- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner
“The stipulation filed in the Texas litigation mitigates, to an extent, concerns of potentially conflicting decisions and duplicative efforts between the district court and the PTAB.12 Director’s Memo at 7. Similarly, Petitioner’s stipulation in the Oregon litigation (i.e., that it will not pursue an invalidity defense that the claims challenged in this IPR proceeding are invalid based on grounds that were raised or reasonably could have been raised during the IPR) also mitigates concerns of potentially conflicting decisions and duplicative efforts. Patent Owner contends Petitioner’s stipulation falls short of a Sotera stipulation by carving out any circumstance that “otherwise terminate[s] the instituted IPR.” Prelim. Sur-reply 2–3. Patent Owner interprets this carve- on the patent application publication of the Lee patent. Ex. 1007. Because the disclosures of the Lee patent and patent application publication are substantively identical, we consider the stipulation not to pursue any obviousness ground based on Lee to apply with equal force to Lee’s patent application publication. 12 The stipulation in the Texas litigation bars the defendant from pursuing “any obviousness ground that includes” Lee or Watanabe. IPR2023-00900, Exhibit 1031. Here, Petitioner’s grounds 1A–1F challenge claims 13–17 based in whole or in part on Lee, and grounds 2A–2C and 3 challenge claims 1 and 13 based on combinations of references that do not include Lee or Watanabe. Pet. 3. As such, the grounds to be resolved by the PTAB will differ somewhat from those presented in the Texas litigation. written decision, thereby rendering the stipulation an “empty promise” as the district court in the Texas litigation will undoubtedly resolve validity before a final written decision in this case. Id. at 3. We disagree. We do not understand Petitioner’s stipulation to require that a final written decision be issued before the stipulation takes effect. Rather, so long as an inter partes review is instituted, and until such time as the IPR is terminated or vacated, Petitioner will not pursue any invalidity defense before the district court that is “based on grounds that were raised or could have been raised during the IPR.” Ex. 1034. In summary, given the stipulations filed by the petitioners in the Oregon and Texas litigations, it appears that there will be minimal, if any, overlap between the issues raised in the petitions and in the parallel district court proceedings. Accordingly, Fintiv factor 4 weighs against discretionary denial.” slip op. at 21
Claim construction§ 103 obviousnessDiscretionary denialPatents in suitUS 7,378,702 - Amperex Technology Ltd. v. Semiconductor Energy Laboratory Co., Ltd.Institution deniedPTAB · Dec 5, 2023 · IPR2023-01016 · APJ Christopher M Kaiser · IPR · Institution
Institution was denied because the petition did not show a reasonable likelihood that claims 1–8 were unpatentable over the asserted Shim- or Fujiki-based grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Because Petitioner relies on Shim and Fey to show that a person of ordinary skill in the art would have understood that fluorine would be present in a crack portion of the Shim or Shim/Lee particle, because the requirement for fluorine to be present in a crack portion appears in all the challenged claims, and because Petitioner does not show sufficiently that Shim and Fey would have suggested the presence of fluorine in a crack portion, we determine that Petitioner has not shown a reasonable likelihood of prevailing with respect to any claim challenged on the basis of Shim.” slip op. at 17
- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner asserts that a person of ordinary skill in the art “would have had at least a bachelor’s degree in chemistry, chemical engineering, or materials science and at least five years of experience in the field of batteries and battery materials.” Pet. 33. According to Petitioner, “[i]ndividuals with different education and additional experience could still be of ordinary skill in the art if that additional experience compensates for a deficit in their education and experience.” Id. (citing Ex. 1003 ¶¶ 83–91). On the present record, Patent Owner does not contest Petitioner’s definition of a person of ordinary skill in the art. Prelim. Resp. 19–20. In light of the record before us, and for purposes of this Decision, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’828 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand and implement the teachings of the ’828 patent and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown”) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)).” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“As explained more fully below, we need not construe any claim terms to determine that Petitioner fails to show sufficiently that the prior art teaches or suggests the subject matter of the challenged claims. Thus, after considering the arguments and information presented in the Petition and Preliminary Response, we determine that we do not need to construe any terms expressly for purposes of this Decision. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 8
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached
“Because Petitioner relies on Shim and Fey to show that a person of ordinary skill in the art would have understood that fluorine would be present in a crack portion of the Shim or Shim/Lee particle, because the requirement for fluorine to be present in a crack portion appears in all the challenged claims, and because Petitioner does not show sufficiently that Shim and Fey would have suggested the presence of fluorine in a crack portion, we determine that Petitioner has not shown a reasonable likelihood of prevailing with respect to any claim challenged on the basis of Shim.” slip op. at 17
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,741,828 - Infineon Technologies AG v. Amatech Group LimitedSome claims unpatentablePTAB · Dec 1, 2023 · IPR2022-00951 · APJ Stacey G White · IPR · Final written decision
Claims 1, 2, 4–6, and 8–10 are unpatentable as obvious; claims 3 and 11 were not shown unpatentable, and claim 7 was not reached.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“We find that Petitioner’s description is consistent with the prior art and patent specification currently before us. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (prior art itself may reflect an appropriate level of skill). For purposes of our Decision, we adopt Petitioner’s definition of the level of ordinary skill in the art as “a Bachelor’s degree in electrical engineering or a similar field, and 1–2 years of experience researching and developing antennas used in RFID applications.” See Pet. 8. In addition, we note that we agree with Patent Owner’s statement that the distinction between the parties’ proposals is not material to any dispute before us and we find that our determinations would be the same under either definition of the person of ordinary skill in the art.” slip op. at 6
- Expert testimonyPetitioner expert creditedDecided for petitioner
“We are not persuaded that Dr. van der Weide’s cited testimony is of a nature that should lead us to give his testimony no weight. We note that Patent Owner did not move to strike or exclude Dr. van der Weide’s testimony. When considering credibility and weight of evidence below, we consider Dr. van der Weide’s testimony as a whole as well as all other evidence of record and accord it the appropriate weight.” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“provide an express construction of the full breadth of a claim term. “The Board is required to construe ‘only those terms ... that are in controversy, and only to the extent necessary to resolve the controversy.’” Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). As such, we proceed in line with Federal Circuit case law, which “prescribes—deciding only the issues necessary to resolve the dispute before it.” Nichia Corp. v. DSS, Inc., No. 2022-1704, 2023 WL 7211097, at *3 (Fed. Cir. Nov. 2, 2023) (citing Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017)). The Federal Circuit has long recognized that “[c]laim construction is a matter of resolution of disputed meanings and technical scope” and that claim construction may be required in an obviousness context “when the meaning or scope of technical terms and words of art is unclear and in dispute and requires resolution in order to determine obviousness.” U.S. Surgical Corp. v. Ethicon, Inc., 103 F.3d 1554, 1568 (Fed. Cir. 1997). In order to determine whether Petitioner’s obviousness grounds meet their required burden of proof, we need not expressly state the full scope of this claim term. Thus, we are within our authority to proffer a construction that determines the scope of a claim term in a manner sufficient to determine whether the asserted art teaches the claim. In other words, there may be other ways to meet the disputed limitation, but for the purposes of our Decision, it is proper to expressly determine a claim term’s scope only as much as is required to resolve the disputed issues before us.” slip op. at 17
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“the invention(s), but rather as examples of some of the embodiments.” Id. at 25:65–26:1; see also id. at 6:18–20 (embodiments “should be construed as illustrative rather than limiting”), 5:22–24 (“non-limiting example”). The Federal Circuit has noted that “[e]mbodiments in the specification—even if there is only one embodiment—cannot limit the scope of the claims absent the patentee’s ‘words or expressions of manifest exclusion or restriction.’” Apple Inc. v. Wi-LAN Inc., 25 F.4th 960, 967 (Fed. Cir. 2022) (citing Hill- Rom Servs., Inc. v. Stryker Corp., 755 F.3d 1367, 1372 (Fed. Cir. 2014)). After reviewing the complete record, we see no such manifest exclusion or restriction in the ’240 patent specification. We decline Patent Owner’s request to limit the claims to the described single-frequency embodiments. See Phillips, 415 F.3d at 1323. We need not provide further express construction of this claim language for purposes of this Decision.” slip op. at 23
Patent outcomesUS 9,165,240 mixedClaim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 9,165,240
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.