- PTAB · Sep 15, 2025 · IPR2025-00632 · APJ Mitchell G Weatherly · IPR · Institution
The Board instituted IPR on all challenged claims and grounds, finding a reasonable likelihood that claims 1, 2, 7–9, 11, 12, and 20–24 are obvious over Yamaguchi-727.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Cerebrum Sensor Technologies, Inc. (“Patent Owner”) timely filed a Preliminary Response. Paper 9 (“Prelim. Resp.”).1 Institution of an inter partes review is authorized by statute when “the information presented in the petition filed under section 311 and any response filed under section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Based on our review of the record, we conclude that Petitioner is reasonably likely to prevail with respect to at least one of the challenged claims.” slip op. at 2
- BurdenInstituted
“We disagree. Positioning module 6 to face a “predetermined direction” is a form of preventing movement that falls within the scope of limitation 1b. Moreover, Yamaguchi-727 uses a method for preventing movement of its module 6 in its housing 20, silicone potting material, that is expressly recognized by the Specification of the ’421 patent when it states: “A common technique used to assist in fixturing the electrical sensor device 40 known within the automotive industry is to fill the internal cavity with a coating material such as a neutral silicone or the like for purposes of retaining placement position.” Ex. 1001, 13:56–60. Although the Specification also asserts that the sensor assemblies disclosed in the 421 patent “do not use or require the use of any such coating or filing agents or materials for any fixturing of the electrical sensor device 40,” id. at 13:61–64, limitation 1b merely requires that the “sensor device . . . is disposed within the internal cavity and attached therein to prevent movement of the device within the internal cavity,” id. at 30:25–27. Absent a persuasive argument to the contrary, we preliminarily conclude that Yamaguchi-727’s use of potting material to hold its module 6 in place within its housing 20 meets the requirements of limitation 1b. Both parties are encouraged to adduce intrinsic evidence relating to the meaning of limitation 1b at trial. For all the reasons set forth above, we find that Petitioner has established a reasonable likelihood of proving the Yamaguchi-727 renders claim 1 unpatentable as obvious. 2. Dependent Claims 2, 7–9, 11, 12, and 20–24 Petitioner identifies the portions of Yamaguchi-727 that teach the limitations introduced in dependent claims 2, 7–9, 11, 12, and 20–24, all of which ultimately depend from claim 1. Pet. 32–40. Patent Owner relies upon its argument that Petitioner’s showing for claim 1 is deficient as the reason why Petitioner’s challenge to dependent claims 2, 7–9, 11, 12, and 20–24 fails. We reject this argument for the reasons stated in Part II.C.1 above. Based on our review of Petitioner’s otherwise uncontested argument and evidence cited in support, we find that Petitioner also establishes a reasonable likelihood of proving that Yamaguchi-727 renders dependent claims 2, 7–9, 11, 12, and 20–24 unpatentable as obvious. D. Remaining Challenges” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“Petitioner complies with the requirement of identifying “[h]ow the claim language is to be construed” by setting forth proposed interpretations of various claim terms in the table above.7 Both cases cited by Patent Owner relate to an issue presented by a petitioner’s alleged inconsistent handling of whether a claim term is subject to interpretation as a means-plus-function element under 35 U.S.C. § 112(f). Orthopediatrics Corp. v. K2M, Inc., IPR2018-01546, Paper 10 at 11 (PTAB Feb. 14, 2019); 10x Genomics, Inc. v. President and Fellows of Harvard College, IPR2023- 7 Neither party has identified any claim language that might invoke interpretation as a means-plus-function limitation, and we discern no such claim language. Additionally, we do not imply that a petitioner must always propose express interpretations for specific claim language to comply with Rule 42.104(b)(3). Rather, we only note that Petitioner has, by any measure, complied by expressly proposing interpretations for identified claim language.” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“We disagree. Positioning module 6 to face a “predetermined direction” is a form of preventing movement that falls within the scope of limitation 1b. Moreover, Yamaguchi-727 uses a method for preventing movement of its module 6 in its housing 20, silicone potting material, that is expressly recognized by the Specification of the ’421 patent when it states: “A common technique used to assist in fixturing the electrical sensor device 40 known within the automotive industry is to fill the internal cavity with a coating material such as a neutral silicone or the like for purposes of retaining placement position.” Ex. 1001, 13:56–60. Although the Specification also asserts that the sensor assemblies disclosed in the 421 patent “do not use or require the use of any such coating or filing agents or materials for any fixturing of the electrical sensor device 40,” id. at 13:61–64, limitation 1b merely requires that the “sensor device . . . is disposed within the internal cavity and attached therein to prevent movement of the device within the internal cavity,” id. at 30:25–27. Absent a persuasive argument to the contrary, we preliminarily conclude that Yamaguchi-727’s use of potting material to hold its module 6 in place within its housing 20 meets the requirements of limitation 1b. Both parties are encouraged to adduce intrinsic evidence relating to the meaning of limitation 1b at trial. For all the reasons set forth above, we find that Petitioner has established a reasonable likelihood of proving the Yamaguchi-727 renders claim 1 unpatentable as obvious. 2. Dependent Claims 2, 7–9, 11, 12, and 20–24 Petitioner identifies the portions of Yamaguchi-727 that teach the limitations introduced in dependent claims 2, 7–9, 11, 12, and 20–24, all of which ultimately depend from claim 1. Pet. 32–40. Patent Owner relies upon its argument that Petitioner’s showing for claim 1 is deficient as the reason why Petitioner’s challenge to dependent claims 2, 7–9, 11, 12, and 20–24 fails. We reject this argument for the reasons stated in Part II.C.1 above. Based on our review of Petitioner’s otherwise uncontested argument and evidence cited in support, we find that Petitioner also establishes a reasonable likelihood of proving that Yamaguchi-727 renders dependent claims 2, 7–9, 11, 12, and 20–24 unpatentable as obvious. D. Remaining Challenges” slip op. at 11
Claim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,835,421 - PTAB · Aug 25, 2025 · IPR2025-00631 · APJ Kevin W Cherry · IPR · Institution
The Board instituted IPR on claims 1–3, 5, 7–9, 11–13, and 15–22 on all five asserted § 103 grounds, finding a reasonable likelihood of success on at least one claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“institute an inter partes review. The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted unless “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” The Supreme Court has held that the Board, in a decision to institute under 35 U.S.C. § 314(b), may not institute review on less than all claims challenged in the petition. SAS Inst. Inc. v. Iancu, 138 S. Ct. 1348, 1355–56 (2018). Moreover, in accordance with our rules, “[w]hen instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.” 37 C.F.R. § 42.108(a) (2020); see also PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (interpreting the statute to require “a simple yes-or-no institution choice respecting a petition, embracing all challenges included in the petition”). Applying those standards, and upon considering the Petition, the Preliminary Response, and the evidence of record, we determine the information presented shows a reasonable likelihood that Petitioner would prevail in establishing the unpatentability of at least one of the challenged claims of the ’027 patent. Accordingly, we institute an inter partes review of all challenged claims (i.e., 1–3, 5, 7–9, 11–13, and 15–22) of the ’027 patent, based on the grounds asserted in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art would have “possessed an undergraduate degree in chemistry, polymers, materials science, chemical engineering (or related field) and one to two years of experience with constructing and manufacturing tires, tire patches, tire decals/stickers and/or the like.” Pet. 8 (citing Ex. 1003 ¶¶ 6–11). According to Petitioner, “Additional education could compensate for less practical experience. Conversely, additional practical experience could compensate for less education.” Id. Patent Owner does not provide an alternate definition, but, “Patent Owner does not acquiesce to, and reserves the right to address, [Petitioner’s] definition of a POSA.” Prelim. Resp. 6 n.6. Petitioner’s proposed definition appears to be consistent with the disclosure of the ’027 patent, and we adopt it for purposes of this Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that the prior art itself may “reflect[] an appropriate level” of ordinary skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“Having considered the record, we determine that no express claim construction is necessary for any claim terms. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 10
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Instituted
“We disagree with Patent Owner’s contentions that these disclosures indicate that Wilson’s patch would not meet the construction of “barrier material composition.” None of these disclosures even suggests that the base of Wilson’s patch is rigid as Patent Owner suggests. To begin with, the fact that the housing is “more rigid” provides no information about the absolute rigidness of the patch. See Ex. 1009, 9:16–21. As for the disclosure that the patch is contoured (id. at 3:35–67), Patent Owner provides only attorney argument to support its contention that the contour demonstrates that Wilson’s patch must be so rigid that it cannot be meet the claim limitation. In contrast, Petitioner demonstrates that Wilson discloses using the exact same materials described in the challenged patent (see Ex. 1001, 6:33–58 (noting “[e]lastomeric materials useful for forming the intermediate layer 24 include but are not limited to gum rubber, vulcanized natural rubber SBR . . . or comparable materials”); Ex. 1009, 3:49–55 (noting the patch may be constructed from natural rubber (NR), a preferred mixture of chlorobutyl rubber and natural rubber (CR/NR), or a preferred mixture of SBR and natural rubber (SBR/NR)), and provides detailed testimony from its expert to support its contentions (see Ex. 1003 ¶¶ 114–119). On the current record, we find Petitioner’s reasoning and evidence to be persuasive, and find that Petitioner has shown sufficiently that Willson discloses or teaches this limitation.” slip op. at 20
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,124,027 - Posco Co., Ltd. v. ArcelormittalInstitutedPTAB · Jul 23, 2025 · IPR2025-00371 · APJ Brian D Range · IPR · Institution
The Board instituted IPR on claims 1–25 based on all petitioned grounds, finding a reasonable likelihood that POSCO would prevail.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Under 35 U.S.C. § 314(a), an inter partes review may not be instituted unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” The following findings of fact and conclusions of law are not final, but are made for the sole purpose of determining whether Petitioner meets the threshold for initiating review. Any final decision shall be based on the full trial record, including any response timely filed by Patent Owner. Any arguments not raised by Patent Owner in a timely-filed response may be deemed waived. For the reasons stated below, we determine that Petitioner has established a reasonable likelihood that it would prevail with respect to at least one claim. We hereby institute an inter partes review as to claims 1–25 of the ’227 patent based upon Petitioner’s asserted grounds of unpatentability.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶ 15). For purposes of this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the ’227 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner does not propose any claim constructions. Pet. 3. We do not discern a need to construe explicitly any claim language at this juncture because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“35 U.S.C. § 103(a) as obvious over Takagi and Cornette, citing the Declaration of Dr. Miles for support. Pet. 1, 6–49 (citing Ex. 1003) (Petitioner’s Ground 1A). a. Claim 1 Petitioner argues that Takagi and Cornette teach or suggest each recitation of claim 1. Pet. 6–31. Petitioner argues, for example, that the preamble of claim 1 is not limiting or, alternatively, imparts no structural distinction from Takagi. Id. at 20–23 (citing, e.g., Ex. 1003 ¶ 48). Petitioner further argues that Takagi and Cornette teach forming or hot stamping to arrive at their products. Id. at 23 (citing, e.g., Ex. 1016 ¶ 36 (Takagi referring to “form[ing]” its products shape); Ex. 1014, 9–11 (Cornette referring to “hot stamping”); Ex. 1003 ¶ 48. Petitioner argues that Takagi teaches a strip of base steel having a first and second side. Id. at 23–24 (citing, e.g., Ex. 1003 ¶ 49; Ex. 1016 ¶¶ 13, 36. Petitioner argues that Takagi teaches a coating that is a “diffusion layer” having five phases as depicted by Takagi Figure 2A and explained by Takagi Table 1 (Takagi Fig. 4). Id. at 24–30 (citing, e.g., Ex. 1003 ¶¶ 50–59; Ex. 1016 ¶ 20, Fig. 2A). Petitioner argues that Takagi alone or as modified by Cornette teaches a coating thickness greater than than 30 µm. Id. at 30–31; Ex. 1014, 9; Ex. 1016 ¶ 35; Ex. 1003 ¶¶ 60–61. Petitioner explains why a person having ordinary skill in the art would have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 31–47; Ex. 1016 ¶¶ 19–37, 47; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13; Ex. 1055 ¶¶ 2, 7, 14–15, 18, Fig. 3). Based on our review and consideration of the current record, we determine that the information presented sufficiently supports, for purposes of institution, Petitioner’s assertions that Takagi and Cornette teach or suggest each limitation of claim 1. See Pet. 6–31. We therefore determine Petitioner has met its burden to show a reasonable likelihood it would prevail in demonstrating that claim 1 would have been obvious over Takagi and Cornette.” slip op. at 12
Claim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,326,227 - Posco Co., Ltd. v. ArcelormittalInstitutedPTAB · Jul 23, 2025 · IPR2025-00370 · APJ Brian D Range · IPR · Institution
The Board instituted IPR of claims 1–30 on all twelve asserted obviousness grounds, finding a reasonable likelihood that POSCO would prevail.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” The following findings of fact and conclusions of law are not final, but are made for the sole purpose of determining whether Petitioner meets the threshold for initiating review. Any final decision shall be based on the full trial record, including any response timely filed by Patent Owner. Any arguments not raised by Patent Owner in a timely-filed response may be deemed waived. For the reasons stated below, we determine that Petitioner has established a reasonable likelihood that it would prevail with respect to at least one claim. We hereby institute an inter partes review as to claims 1–30 of the ’602 patent based upon Petitioner’s asserted grounds of unpatentability.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“For purposes of this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the ’602 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner does not propose any claim constructions. Pet. 3. We do not discern a need to construe any claim language at this juncture because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200” slip op. at 9
- BurdenInstituted
“determine that the information presented sufficiently supports, for purposes of institution, Petitioner’s assertions that Takagi and Cornette teach or suggest each limitation of claim 1. See Pet. 6–33. We therefore determine Petitioner has met its burden to show a reasonable likelihood it would prevail in demonstrating that claim 1 is obvious over Takagi and Cornette.” slip op. at 12
Claim constructioncites KSR · GrahamPatents in suitUS 10,961,602 - Globus Medical, Inc. v. Spinelogik, Inc.InstitutedPTAB · Jul 14, 2025 · IPR2025-00226 · APJ Matthew S Meyers · IPR · Institution
The Board instituted IPR of claims 1–5, 7, and 9 on all asserted grounds, finding a reasonable likelihood that Moskowitz and Steffee render at least one challenged claim obvious.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“A claim is unpatentable under 35 U.S.C. § 103(a) if the differences between the subject matter sought to be patented and “the prior art are such that the subject matter as a whole would have been obvious at the time the invention was made to a person having ordinary skill in the art to which that subject matter pertains.” KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 406 (2007). The question of obviousness is resolved on the basis of underlying factual determinations including: (1) the scope and content of the prior art; (2) any differences between the claimed subject matter and the prior art; (3) the level of ordinary skill in the art; and (4) objective evidence of nonobviousness when presented. Graham v. John Deere Co., 383 U.S. 1, 17–18 (1966). In analyzing the obviousness of a combination of prior art elements, it can be important to identify a reason that would have prompted one of skill in the art “to combine . . . known elements in the fashion claimed by the patent at issue.” KSR, 550 U.S. at 418. A precise teaching directed to the specific subject matter of a challenged claim is not necessary to establish obviousness. Id. Rather, “any need or problem known in the field of endeavor at the time of invention and addressed by the patent can provide a reason for combining the elements in the manner claimed.” Id. at 420. Accordingly, a party who petitions the Board for a determination of unpatentability based on obviousness must show that “a skilled artisan would have been motivated to combine the teachings of the prior art references to achieve the claimed invention, and that the skilled artisan would have had a reasonable expectation of success in doing so.” In re Magnum Oil Tools Int’l, Ltd., 829 F.3d 1364, 1381 (Fed. Cir. 2016) (citations omitted).” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“Under that standard, the words of a claim are generally given their “ordinary and customary meaning,” which is the meaning the term would have had to a person of ordinary skill at the time of the invention, in the context of the entire patent including the specification. See Phillips, 415 F.3d at 1312–13. “In determining the meaning of the disputed claim limitation, we look principally to the intrinsic evidence of record, examining the claim language itself, the written description, and the prosecution history, if in evidence.” DePuy Spine, Inc. v. Medtronic Sofamor Danek, Inc., 469 F.3d 1005, 1014 (Fed. Cir. 2006) (citing Phillips, 415 F.3d at 1312–17).” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“according to what Petitioner purports to be Patent Owner’s “apparent construction” is relevant to only Petitioner’s challenge based on Moskowitz and the knowledge of a person of ordinary skill in the art (Ground 1). Here, Petitioner acknowledges that “even if a ‘curved’ channel has a narrower meaning requiring the channel to follow a curved path (instead of the straight path identified in the accused products), Petitioner demonstrates that the challenged claims are also unpatentable over at least Grounds 2 and 3.” Pet. 24–25. For purposes of this decision, we find Petitioner’s alternative construction to be consistent with the ’385 patent’s disclosure. See, e.g., Ex. 1001, 15:49–53 (“The anchoring member is advanced through the curved fusion member channel and into the vertebral body. As the fusion member channel is curved, the path that the anchoring member travels is also curved.”). We also find it to be consistent with the construction Petitioner advances in the related litigation. See Ex. 1029, 1 (Petitioner preliminarily construing “curved channel” to mean “channel that has a curved path”). However, because construing “curved,” as it appears in the term “curved channel,” is not necessary to determine whether Petitioner has made a sufficient showing to support institution, we determine that an express interpretation of this term is not needed at this stage of the proceeding. Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms that . . . are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). On this limited record, and at this early stage of the proceeding, the Board has not made a final determination on the construction of “curved,” as it appears in the term “curved channel.” The parties should consider developing this issue further during trial.” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“a) Motivation to Combine Petitioner asserts that one of ordinary skill in the art would have been “motivated to use Steffee’s curved anchors with Moskowitz’s screw box to minimize potential migration of the screw box after implantation.” Pet. 84 (citing id. at 88–90). According to Petitioner, “Steffee taught that forces tending to cause sagittal or lateral movement of the fastener (and thereby migration of the implant) can be minimized or eliminated by using a curved fastener that increases the entry angle of the fastener to near-perpendicular.” Id. at 88. Thus, Petitioner asserts that one of ordinary skill in the art would have been “motivated to use Steffee’s curved anchors with Moskowitz’s screw box to lower the forces (acting through Moskowitz’s existing screws) that tended to cause migration of fusion implants.” Id. (citing Ex. 1002 ¶ 169). Petitioner also points out that “Moskowitz’s anchors are threaded screws” (Pet. 89 (citing id. at 30–48)), and Petitioner asserts that one of ordinary skill in the art would have understood that such screws could strip (e.g., due to misalignment or over-torquing), which would reduce the stability of engagement between the fusion member and vertebrae. Ex. 1002 ¶ 170. Because the fasteners in Steffee do not contain threads, and further contained barbs to prevent the fastener from backing out (Ex. 1005, 2:61–68), a POSA would have understood that such fasteners would not be subject to such stripping. Ex. 1002 ¶ 170. Therefore, a POSA would have been motivated to use similar curved fasteners having barbs to eliminate the risk of stripping inherent when using Moskowitz’s screws. Id. Pet. 89. In addition, Petitioner contends that one of ordinary skill in the art would have “had a reasonable expectation of success in making this modification because it would only require the use of known machining techniques, and because the use of both curved anchors and curved channels had already been shown successful in spinal implants.” Id. at 84. Petitioner provides several reasons to support its contention. See id. at 90–91.” slip op. at 17
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,460,385 - Globus Medical, Inc. v. Spinelogik, Inc.InstitutedPTAB · Jul 14, 2025 · IPR2025-00225 · APJ Matthew S Meyers · IPR · Institution
The Board instituted IPR of claims 1–6, 11, 12, and 15–17 on all asserted grounds after finding a reasonable likelihood that Blain anticipates or renders at least one claim obvious.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“determine whether to institute an inter partes review. 35 U.S.C. § 314; 37 C.F.R. § 42.4(a) (2024). The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted unless “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least [one] of the claims challenged in the petition.”” slip op. at 2
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“1. Anticipation A prior art reference can only anticipate a claim if it discloses all the claimed limitations “arranged or combined in the same way as in the claim.” Wm. Wrigley Jr. Co. v. Cadbury Adams USA LLC, 683 F.3d 1356, 1361 (Fed. Cir. 2012) (quoting Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1370 (Fed. Cir. 2008)). “However, a reference can anticipate a claim” slip op. at 6
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“Alternatively, to the extent Blain may not disclose that its instrument guide 14 “extend[s] outside a patient’s body to a medical practitioner,” Petitioner argues that it would have “been obvious based on common sense and the general knowledge of POSAs to make the length of the shaft of instrument guide 14 sufficiently long so that the physician would not have to stick his or her hand inside the incision location to insert the implant between the vertebrae.” Pet. 53 (citing Ex. 1002 ¶ 123). According to Petitioner, one of ordinary skill in the art would have understood such a configuration to “provid[e] the known benefit of allowing the physician to maneuver and manipulate the delivery tool without having to insert his or her hand into the patient’s body to deliver and position the implant.” Id. (citing Ex. 1002 ¶ 124). And, relying on the declaration testimony of Mr. Culbert, Petitioner contends that one of ordinary skill in the art would have “had a reasonable expectation of success in modifying the instrument guide 14 such that its handle 20 and shaft 22 extends outside the patient’s body, as this involved nothing more than lengthening the proximal shaft 22A and/or distal shaft 22B.” Id. at 54 (citing Ex. 1002 ¶ 126); see also Ex. 1004, 5:4–6; Ex. 1005 ¶ 21 (Blain disclosing that “the relative lengths between the proximal shaft 22A and the distal shaft 22B can vary”).” slip op. at 17
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“At this stage of the proceeding, however, we determine that no terms require explicit construction to resolve the issues presented by the arguments and evidence of record to reach a decision on institution. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (per curiam) (claim terms need to be construed “only to the extent necessary to resolve the controversy” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 10
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,730,805 - PTAB · Jun 25, 2025 · IPR2024-01280 · APJ Jo-Anne M Kokoski · IPR · Remand
On remand, the Board denied institution under § 314(a), finding the Fintiv factors favored denial despite declining to deny under § 325(d).
RulingsRemand decision- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsInstitution denied 325dDecided for petitioner
“Other than initials on a lengthy IDS, nothing in the record indicates that the Examiner substantively considered Takeuchi, Kim, Pienemann, or among over 1,000 other references listed on the IDS, which, as noted in the Director Review Decision, “is over 40 times the size of a typical IDS.” Pet. Remand Br. 5–6; DR Dec. 7 n.3 (citing Setting and Adjusting Patent Fees During Fiscal Year 2025, 89 FR 91898 at 91924 (Nov. 20, 2024)); Ex. 1002, 228–284. Petitioner also shows that the applicant did not respond to the Examiner’s request that the applicant specifically point out “any particular reference or portion of a reference in the [IDS] which the examiner should take [sic] pay particular attention to.” Ex. 1002, 174, 295– 302.” slip op. at 13
- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Institution denied fintivInstitution denied
“Patent Owner is likely correct that the ITC would not have been inclined to grant a stay if one had been requested at the time the Institution Decision issued. Moreover, the ITC conducted a full evidentiary hearing a month after the Institution Decision issued, and the target date for the ITC’s final determination is several months before the projected statutory deadline for the Board’s final written decision. PO Remand Br. 7. Accordingly, we determine that Fintiv factor 1 weighs in favor of discretionary denial. See also Klein Tools, Inc. v. Milwaukee Electric Tool Corp., IPR2024-01400, Paper 22 at 2 (PTAB June 9, 2025) (Acting Director Stewart determining that Fintiv factor 1 weighs in favor of discretionary denial when the ITC investigation is unlikely to be stayed, the ITC already conducted a full evidentiary hearing, and the ITC final determination is expected to issue six months before the statutory deadline for the Board’s final written decision).” slip op. at 19
Discretionary denialcites PhillipsPatents in suitUS 11,925,202 - PTAB · Jun 25, 2025 · IPR2024-01406 · APJ Jo-Anne M Kokoski · IPR · Remand
On remand, the Board denied institution of review of claims 1, 3, 4, 8–13, and 15 under § 314(a), finding the Fintiv factors favored discretionary denial.
RulingsRemand decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“stay or evidence exists that one may be granted if a proceeding is instituted.” Fintiv, Paper 11 at 6. A stay of litigation pending resolution of an inter partes review allays concerns about inefficiency and duplication of efforts, and strongly weighs against exercising our authority to deny institution. Fintiv, Paper 11 at 6. The Guidance Memo states that “the Board will apply the Fintiv factors when there is a parallel proceedings at the International Trade Commission.” Guidance Memo 2. Patent Owner asserts that a stay of the ITC Investigation had not been requested at the time of the Institution Decision,7 and argues that “the ITC does not stay investigations pending IPR.” PO Supp. Br. 4. Patent Owner also notes that the Institution Decision issued “just days before the ITC evidentiary hearing.” Id. Accordingly, Patent Owner argues that this factor favors denial. Id. Patent Owner is likely correct that the ITC would not have been inclined to grant a stay if one had been requested at the time the Institution Decision issued. Moreover, the ITC conducted a full evidentiary hearing less than three weeks after the Institution Decision issued, and the target date for the ITC’s final determination is four months before the statutory deadline for the Board’s final written decision. PO Supp. Br. 5. Accordingly, we” slip op. at 9
Discretionary denialPatents in suitUS 11,925,202 - PTAB · Jun 23, 2025 · PGR2025-00016 · APJ Eric C Jeschke · PGR · Institution
The Board instituted PGR on claims 4–14 on all asserted grounds, finding it more likely than not that at least one challenged claim is unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. See 35 U.S.C. § 324 (2024); 37 C.F.R. § 42.4(a) (2024) (“The Board institutes the trial on behalf of the Director.”). Post-grant review may not be instituted “unless . . . the information presented in the petition . . . , if such information is not rebutted, would demonstrate that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” 35 U.S.C. § 324. Upon consideration of the evidence and arguments in the record, for the reasons below, we determine that the information presented shows that it is more likely than not that Petitioner would prevail with respect to at least one of the challenged claims. We thus institute a post-grant review on all challenged claims on all asserted grounds. See SAS Inst. Inc. v. Iancu, 584 U.S. 357, 362–63, 369–70 (2018); 37 C.F.R. § 42.208(a) (“When instituting post-grant review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.”).” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner states that it “does not dispute” the definition of one of ordinary skill in the art proposed by Petitioner and “notes that it substantially tracks” Patent Owner’s definition. Prelim. Resp. 19–20; see also id. at 20 n.7 (defining one of ordinary skill in the art as having “at least a Bachelor of Science degree in Mechanical or Agricultural Engineering and two years of experience in the design of machines, or have had equivalent knowledge and experience”). Petitioner’s proposed definition of the level of ordinary skill in the art appears consistent with the record at this stage of the proceeding, including the prior art. See GPAC Inc., 57 F.3d at 1579. Patent Owner’s proposal is the same, except for use of the term “machines” instead of “vehicles.” Furthermore, Patent Owner does not argue at this stage of the proceeding that Petitioner’s proposal for the level of ordinary skill leads to an improper understanding of how a skilled artisan would understand either the challenged patent or the prior art. For purposes of this Decision, we adopt the definition of the level of ordinary skill in the art proposed by Petitioner.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther
“In contrast, we view the record at this stage as supporting an understanding of the “frame” in “mainframe” as a supporting structure. Patent Owner provides a dictionary defining “frame” as a “rigid supporting structure” (Prelim. Resp. 22 (citing Ex. 2009 at 3)), and Petitioner proposes “a supporting structure” based on that definition (see Pet. Reply CC Br. 3 (mistakenly citing Ex. 2007 rather than Ex. 2009)). Further, this dictionary definition does not contradict the “mainframe” described in the Specification or any other intrinsic evidence. See, e.g., Ex. 1001, Fig. 4, 2:44–45 (“FIG. 4 is a perspective view of a mainframe of a compact tool carrier.”); see also Phillips, 415 F.3d at 1322–23 (stating that judges may “rely on dictionary definitions when construing claim terms, so long as the dictionary definition does not contradict any definition found in or ascertained by a reading of the patent documents”).” slip op. at 15
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“Patent Owner’s argument does not identify a deficiency in the Petition, however, because we did not adopt any part of Patent Owner’s proposed construction of “mainframe,” including the phrase “the body,” which serves as the starting point of Patent Owner’s argument here. See § II.C.3. Instead, we preliminarily construe “mainframe” under its plain and ordinary meaning as a primary supporting structure. Id. Limitation 4.2 makes clear that the “mainframe” supports the “loader.” The current record supports that at least the structures shaded in green and blue in the annotated version of Figure 1 of KR996 immediately above are the primary supporting structure for the loader (i.e., a “mainframe”)—i.e., when in operation, those structures provide the primary “weight-bearing frame supporting the loader unit 40” in KR996. Pet. 24 (“KR996’s mainframe includes the frame components of KR996 vehicle for supporting the attached loader unit 40 by providing structural or weight-bearing support when the vehicle is in operation.” (citing Velinsky Decl. ¶¶ 65–67)); Pet. 26–27 (stating that the “mainframe” are the “portions [that] are part of a frame or body making up the KR996 vehicle when in operation providing structural and weight-bearing support for the loader unit 40, in addition to support for other features such as the control station and drive mechanism” (citing Velinsky Decl. ¶ 67)); see, e.g., Ex. 1005, Figs. 7–9 (showing the vehicle of KR996 in operation). The testimony of Dr. Velinsky supports these positions, explaining that one of ordinary skill in the art would have understood the green and blue structures above as part of a “mainframe.” See Velinsky Decl. ¶¶ 66– 67, cited at Pet. 24–27. At this stage of the proceeding, Patent Owner has not presented declaration testimony—but rather only attorney argument— supporting that one of ordinary skill in the art would have identified fixture 41 in KR996 as something other than a “mainframe.” See Elbit Sys. of Am., LLC v. Thales Visionix, Inc., 881 F.3d 1354, 1359 (Fed. Cir. 2018) (“‘[A]ttorney argument is not evidence’ and cannot rebut other admitted evidence.” (quoting Icon Health & Fitness, Inc. v. Strava, Inc., 849 F.3d 1034, 1043 (Fed. Cir. 2017))). On the current record, we determine that Petitioner has made a sufficient showing that KR996 discloses or suggests the mainframe limitations.” slip op. at 29
Claim construction§ 102 anticipation§ 103 obviousnesscites PhillipsPatents in suitUS 12,098,063 - PTAB · Jun 23, 2025 · IPR2025-00381 · APJ Eric C Jeschke · IPR · Institution
The Board instituted IPR on claims 1–10 on all asserted grounds, finding a reasonable likelihood that Kubota would prevail on at least one challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. See 35 U.S.C. § 314 (2024); 37 C.F.R. § 42.4(a) (2024) (“The Board institutes the trial on behalf of the Director.”). Inter partes review may not be instituted “unless . . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314. Upon consideration of the evidence and arguments in the record, for the reasons below, we determine that the information presented shows a reasonable likelihood that Petitioner would prevail with respect to at least one of the challenged claims. We thus institute inter partes review on all challenged claims on all asserted grounds. See SAS Inst. Inc. v. Iancu, 584 U.S. 357, 362–63, 369–70 (2018); 37 C.F.R. § 42.108(a) (“When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.”).” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner states that it “does not dispute” the definition of one of ordinary skill in the art proposed by Petitioner and “notes that it substantially tracks” Patent Owner’s definition. Prelim. Resp. 19–20; see also id. at 20 n.7 (defining one of ordinary skill in the art as having “at least a Bachelor of Science degree in Mechanical or Agricultural Engineering and two years of experience in the design of machines, or have had equivalent knowledge and experience”). Petitioner’s proposed definition of the level of ordinary skill in the art appears consistent with the record at this stage of the proceeding, including the prior art. See GPAC Inc., 57 F.3d at 1579. Patent Owner’s proposal is the same, except for use of the term “machines” instead of “vehicles.” Furthermore, Patent Owner does not argue at this stage of the proceeding that Petitioner’s proposal for the level of ordinary skill leads to an improper understanding of how a skilled artisan would understand either the challenged patent or the prior art. For purposes of this Decision, we adopt the definition of the level of ordinary skill in the art proposed by Petitioner.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner
“But that the Specification may indicate that a “loader support” and a “mainframe” may have some similar functionality does not make the terms interchangeable from a claim construction perspective. See Bd. of Regents of the Univ. of Texas Sys. v. BENQ Am. Corp., 533 F.3d 1362, 1371 (Fed. Cir. 2008) (“Different claim terms are presumed to have different meanings.”) (citing CAE Screenplates Inc. v. Heinrich Fiedler GmbH & Co., 224 F.3d 1308, 1317 (Fed. Cir. 2000) (“In the absence of any evidence to the contrary, we must presume that the use of these different terms in the claims connotes different meanings.”)). For these reasons, we are not persuaded by Patent Owner’s view that intrinsic and extrinsic evidence regarding a different term—“mainframe”—supports a similar proposed construction for “loader support.” See, e.g., Prelim. Resp. 22–27 (discussing intrinsic and extrinsic evidence relating to “mainframe” and then proposing a definition of “loader support”). Instead, we apply the plain and ordinary meaning of “loader support,” which aligns with the view of the Iowa District Court. See Ex. 1020 at 5 (the Iowa District Court stating that “loader support” “will be given [its] plain and ordinary meaning”); 37 C.F.R. § 42.100(b) (“Any prior claim construction determination concerning a term of the claim in a civil action . . . that is timely made of record in the inter partes review proceeding will be considered.”). We need not construe explicitly any claim terms because doing so would not change the outcome of the analysis below. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 12
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“We have reviewed Petitioner’s contentions with respect to the claim, and for the reasons below, we determine that the Petition shows a reasonable likelihood that Petitioner would prevail in demonstrating that claim 1 is both anticipated and would have been obvious based on KR996.” slip op. at 15
Claim construction§ 102 anticipation§ 103 obviousnesscites PhillipsPatents in suitUS 11,465,891
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.