PTAB
Advanced fields
652 decisions · 383msnewest first
  • PTAB · Jun 25, 2025 · IPR2024-01280 · APJ Jo-Anne M Kokoski · IPR · Remand

    On remand, the Board denied institution under § 314(a), finding the Fintiv factors favored denial despite declining to deny under § 325(d).

    RulingsRemand decision
    • PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsInstitution denied 325dDecided for petitioner

      “Other than initials on a lengthy IDS, nothing in the record indicates that the Examiner substantively considered Takeuchi, Kim, Pienemann, or among over 1,000 other references listed on the IDS, which, as noted in the Director Review Decision, “is over 40 times the size of a typical IDS.” Pet. Remand Br. 5–6; DR Dec. 7 n.3 (citing Setting and Adjusting Patent Fees During Fiscal Year 2025, 89 FR 91898 at 91924 (Nov. 20, 2024)); Ex. 1002, 228–284. Petitioner also shows that the applicant did not respond to the Examiner’s request that the applicant specifically point out “any particular reference or portion of a reference in the [IDS] which the examiner should take [sic] pay particular attention to.” Ex. 1002, 174, 295– 302.” slip op. at 13

    • PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Institution denied fintivInstitution denied

      “Patent Owner is likely correct that the ITC would not have been inclined to grant a stay if one had been requested at the time the Institution Decision issued. Moreover, the ITC conducted a full evidentiary hearing a month after the Institution Decision issued, and the target date for the ITC’s final determination is several months before the projected statutory deadline for the Board’s final written decision. PO Remand Br. 7. Accordingly, we determine that Fintiv factor 1 weighs in favor of discretionary denial. See also Klein Tools, Inc. v. Milwaukee Electric Tool Corp., IPR2024-01400, Paper 22 at 2 (PTAB June 9, 2025) (Acting Director Stewart determining that Fintiv factor 1 weighs in favor of discretionary denial when the ITC investigation is unlikely to be stayed, the ITC already conducted a full evidentiary hearing, and the ITC final determination is expected to issue six months before the statutory deadline for the Board’s final written decision).” slip op. at 19

    Discretionary denialcites Phillips
    Patents in suitUS 11,925,202
  • PTAB · Jun 25, 2025 · IPR2024-01406 · APJ Jo-Anne M Kokoski · IPR · Remand

    On remand, the Board denied institution of review of claims 1, 3, 4, 8–13, and 15 under § 314(a), finding the Fintiv factors favored discretionary denial.

    RulingsRemand decision
    • PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied

      “stay or evidence exists that one may be granted if a proceeding is instituted.” Fintiv, Paper 11 at 6. A stay of litigation pending resolution of an inter partes review allays concerns about inefficiency and duplication of efforts, and strongly weighs against exercising our authority to deny institution. Fintiv, Paper 11 at 6. The Guidance Memo states that “the Board will apply the Fintiv factors when there is a parallel proceedings at the International Trade Commission.” Guidance Memo 2. Patent Owner asserts that a stay of the ITC Investigation had not been requested at the time of the Institution Decision,7 and argues that “the ITC does not stay investigations pending IPR.” PO Supp. Br. 4. Patent Owner also notes that the Institution Decision issued “just days before the ITC evidentiary hearing.” Id. Accordingly, Patent Owner argues that this factor favors denial. Id. Patent Owner is likely correct that the ITC would not have been inclined to grant a stay if one had been requested at the time the Institution Decision issued. Moreover, the ITC conducted a full evidentiary hearing less than three weeks after the Institution Decision issued, and the target date for the ITC’s final determination is four months before the statutory deadline for the Board’s final written decision. PO Supp. Br. 5. Accordingly, we” slip op. at 9

    Discretionary denial
    Patents in suitUS 11,925,202
  • PTAB · Jun 6, 2025 · IPR2025-00065 · APJ Brian D Range · IPR · Institution

    The Board denied institution of IPR challenging claims 1–44 under § 314(a), finding the Fintiv factors favoring denial outweighed the Petition’s strong merits.

    RulingsInstitution decision
    • PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Institution denied fintivInstitution denied

      “stipulation would only eliminate the District Court’s consideration of Haddad204. Despite the stipulation, the District Court would still have to consider invalidity of every claim the Petition addresses and would still have to consider the Alie, Baggenstoss, and Park references. Cf. Stellar at 4 (“Petitioner’s invalidity arguments in the district court are more expansive and include combinations of the prior art asserted in these proceedings with unpublished system prior art, which Petitioner’s stipulation is not likely to moot.”). In other words, “Petitioner’s stipulation does not ensure that [this proceeding] would be a ‘true alternative’ to the district court proceeding.” Id. at 3–4. Because of the remaining overlap between the Petition and the District Court proceeding, Fintiv factor four weighs strongly in favor of discretionary denial.” slip op. at 15

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundOther

      “for back side illumination (BSI), which appears to teach or suggest a textured region with surface features “located on the light incident side of the semiconductor layer and configured to interact with incident [EMR].” Pet. 22–27 (citing Ex. 1006, Fig. 5, ¶¶ 53, 68, 96; Ex. 1004 ¶¶ 39–40, 88–95, 101–107). As Petitioner and its expert explain, a person of ordinary skill in the art would have been motivated to modify Figure 5 of Alie into a BSI device because BSI devices allow more incident light to reach the semiconductor layer, resulting in more light being absorbed, an increase in the quantum efficiency, and an improvement in the signal to noise ratio. Pet. 25–26 (citing Ex. 1006 ¶¶ 68, 70; Ex. 1004 ¶¶ 39–40, 92, 95). Patent Owner argues that Alie does teach, suggest, or disclose “a textured region comprising a plurality of shallow trench isolation features.” Prelim. Resp. 9–11. But it appears Petitioner has at least shown Alie teaches or suggests this element. See discussion supra. Patent Owner further argues that Petitioner fails to present any proof that a person of ordinary skill in the art would have been motivated to modify Figure 5 of Alie into a BSI device. Id. at 11–15. But, in our view, Petitioner has provided an adequate motivation to modify Alie—so that more light will be absorbed, yielding an increase in the quantum efficiency and an improvement in the signal to noise” slip op. at 18

    • Parallel petitionsNot reached

      “17 Petitioner filed petitions for IPR2025-00064 and IPR2025-00065 at the same time. Both petitions address the ’682 patent but apply different art. Patent Owner also argues the second petition (IPR2025-00065) should be denied because one petition is sufficient. Patent Owner’s Response to Petitioner’s Notice Ranking Parallel Petitions, Paper 11. Because we deny institution based on Fintiv discretion, it is not necessary to reach Patent Owner’s multiple petition argument.” slip op. at 20

    § 103 obviousnessDiscretionary denialcites KSR
    Patents in suitUS 10,347,682
  • PTAB · Jun 6, 2025 · IPR2025-00064 · APJ Brian D Range · IPR · Institution

    The Board denied institution of IPR challenging claims 1–44 under § 314(a), finding the Fintiv factors favoring denial outweighed the petition’s strong merits.

    RulingsInstitution decision
    • PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Institution denied fintivDenied

      “arguments, and evidence presented in the parallel proceeding.” Fintiv at 12 (emphasis added). “[A] timely-filed Sotera stipulation . . . from a petitioner”—“that, if an IPR . . . is instituted, the petitioner will not pursue in district court . . . any ground raised or that could have been reasonably raised in the IPR”—“is highly relevant, but will not be dispositive by itself. Instead, the Board will consider such a stipulation as part of its holistic analysis under Fintiv.” March 2025 Fintiv Guidance 2–3. Here, Petitioner’s invalidity contentions in the district court case cover” slip op. at 14

    • Parallel petitionsNot reached

      “18 Petitioner filed petitions for IPR2025-00064 and IPR2025-00065 at the same time. Both petitions address the ’682 patent but apply different art. Patent Owner also argues the second petition (IPR2025-00065) should be denied because one petition is sufficient. Patent Owner’s Response to Petitioner’s Notice Ranking Parallel Petitions, Paper 11. Because we deny institution based on Fintiv discretion, it is not necessary to reach Patent Owner’s multiple petition argument.” slip op. at 22

    Discretionary denialcites KSR
    Patents in suitUS 10,347,682
  • PTAB · Jun 3, 2025 · IPR2025-00054 · APJ John G New · IPR · Institution

    The Board instituted inter partes review of claims 1–16 on all petitioned grounds, finding a reasonable likelihood that claim 1 is obvious over Dohil.

    RulingsInstitution decision
    • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

      “Analysis After considering the as-yet uncontested evidence and arguments presented in the Petition, we determine that Petitioner has demonstrated a reasonable likelihood of success at trial in proving that at least one challenged claim of the ’828 patent is unpatentable. In particular, because Petitioner has demonstrated a reasonable likelihood that at least claim 1 is rendered obvious over Dohil in view of the understanding of a person of ordinary skill in the art, as argued in Ground 1, we institute inter partes review with respect to claim 1. Furthermore, because we determine that Petitioner has demonstrated a reasonable likelihood of success at trial in showing that at least one claim is unpatentable on at least one of the stated Grounds, we institute inter partes review of all challenged claims of the ’828 patent, based on all of the grounds identified in the Petition. See 37 C.F.R. § 42.208(a); SAS Inst., Inc. v. Iancu, 584 U.S. 357, 371 (2018); PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (interpreting the statute to require “a simple yesor-no institution choice respecting a petition, embracing all challenges included in the petition”)” slip op. at 16

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “We determine that no express construction of any claim term beyond the definitions provided by the Specification and, in the absence of such definitions, the ordinary and customary meaning, as understood by a person of ordinary skill in the art at the time of the invention, is necessary for the purpose of rendering this Decision. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Matal, 868 F.3d 1013, 1017 (Fed. Cir. 2017); see also Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms … that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 6

    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “appears to be consistent with the level of skill presented in the cited prior art. See, e.g., Exs. 1004–1007; see also Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art itself may reflect an appropriate level of skill in the art). However, at this point we reject the portion of Petitioner’s proposed definition that includes having “access to a medical doctor with a specialty in gastroenterology, and other individuals with expertise related to the above subjects,” as not reflecting the individual level of skill of a given skilled artisan. See Custom Accessories, Inc. v. Jeffrey-Allan Indus., Inc., 807 F.2d 955, 962 (Fed. Cir. 1986) (holding that “[t]he person of ordinary skill is a hypothetical person who is presumed to be aware of all the pertinent prior art. The actual inventor’s skill is not determinative”) (emphasis added, footnotes omitted). For the purposes of this Decision, we adopt Petitioner’s proposed definition as defining a person of ordinary skill in the art as a person who would have had: [A] Ph.D., another advanced degree, or its equivalent, in areas related to pharmaceutics, chemistry, biology, medicine, or a related discipline, and 2–3 years of experience in formulation development. Alternatively, a POSA would have a lesser degree in those fields, with at least five or more years of experience in formulation development.” slip op. at 7

    Claim constructioncites Phillips · KSR
    Patents in suitUS 11,246,828
  • PTAB · Jun 3, 2025 · IPR2025-00052 · APJ John G New · IPR · Institution

    The Board instituted inter partes review of claims 1–17 on all petitioned grounds, finding a reasonable likelihood that claim 1 is obvious over Dohil in view of ordinary skill.

    RulingsInstitution decision
    • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

      “Analysis After considering the as-yet uncontested evidence and arguments presented in the Petition, we determine that Petitioner has demonstrated a reasonable likelihood of success in proving at trial that at least one challenged claim of the ’069 patent is unpatentable. In particular, because Petitioner has demonstrated a reasonable likelihood that at least claim 1 is rendered obvious over Dohil in view of the understanding of a person of ordinary skill in the art, as argued in Ground 1, we institute inter partes review with respect to claim 1. Furthermore, because we determine that Petitioner has demonstrated a reasonable likelihood of success at trial in showing that at least one claim is unpatentable on at least one of the stated Grounds, we institute inter partes review of all challenged claims of the ’069 patent, based on all of the remaining grounds identified in the Petition. See 37 C.F.R. § 42.208(a); SAS Inst., Inc. v. Iancu, 584 U.S. 357, 371 (2018); PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (interpreting the statute to require “a simple yes-or-no institution choice respecting a petition, embracing all challenges included in the petition”)” slip op. at 16

    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “Petitioner’s proposed definition of the level of ordinary skill in the art appears to be consistent with the level of skill presented in the cited prior art. See, e.g., Exs. 1004–1007; see also Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art itself may reflect an appropriate level of skill in the art). However, at this point we reject the portion of Petitioner’s proposed definition that includes having “access to a medical doctor with a specialty in gastroenterology, and other individuals with expertise related to the above subjects,” as not reflecting the individual level of skill of a given skilled artisan. See Custom Accessories, Inc. v. Jeffrey-Allan Indus., Inc., 807 F.2d 955, 962 (Fed. Cir. 1986) (holding that “[t]he person of ordinary skill is a hypothetical person who is presumed to be aware of all the pertinent prior art. The actual inventor’s skill is not determinative”) (emphasis added, footnotes omitted). For the purposes of this Decision, we adopt Petitioner’s proposed definition as defining a person of ordinary skill in the art as a person who would have had: [A] Ph.D., another advanced degree, or its equivalent, in areas related to pharmaceutics, chemistry, biology, medicine, or a related discipline, and 2–3 years of experience in formulation development. Alternatively, a POSA would have a lesser degree in those fields, with at least five or more years of experience in formulation development.” slip op. at 7

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “We determine that no express construction of any claim term beyond the definitions provided by the Specification and, in the absence of such definitions, the ordinary and customary meaning, as understood by a person of ordinary skill in the art at the time of the invention, is necessary for the purpose of rendering this Decision. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Matal, 868 F.3d 1013, 1017 (Fed. Cir. 2017); see also Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms … that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 6

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted

      “Petitioner argues that it would have been obvious to a person of ordinary skill in the art to formulate Dohil’s rapidly dissolving lozenge or tablet to disintegrate within 60 seconds when tested using the USP <701> Disintegration Test. Pet. 26. According to Petitioner, the knowledge of those of skill in the art is represented by, for example, the FDA’s Guidance for Industry on ODTs. Id. Petitioner points out that the FDA Guidance explains that ODTs “disintegrate[] rapidly, usually within a matter of seconds.” Id. (quoting Ex. 1005, 2). Petitioner also notes that the FDA recommends that ODTs have “an in-vitro disintegration time of approximately 30 seconds or less, when based on the United States Pharmacopeia (USP) disintegration test method or alternative (see section IV).” Id. (quoting Ex. 1005, 2). Petitioner argues that the FDA Guidance further “recommend[s] that applicants use the USP method for disintegration testing,” specifically “USP 29, <701> Disintegration.” Id. (citing Ex. 1005, 3 n.3). Petitioner argues that a skilled artisan would have been motivated to follow the FDA Guidance in formulating Dohil’s rapidly dissolving lozenge or tablet containing budesonide. Pet. 26. Petitioner contends that the FDA Guidance provides the agency’s thinking and recommendations on the topic of orally dissolving tablets. Id. (citing Ex. 1005, 1). Petitioner argues that the FDA regulates the use of pharmaceutical compositions in the United States, and that Dohil’s formulations were intended to “be used in therapy for human patients,” and the initial testing of its formulations was conducted within the United States. Id. at 26–27 (citing Ex. 1002 ¶¶ 28, 49). Petitioner contends that a person of ordinary skill in the art, seeking to formulate budesonide into an orally disintegrating tablet, would have been motivated to follow the FDA Guidance that such a tablet should disintegrate within 30 seconds or less when tested using the USP <701> Disintegration Test. Id. (citing Ex. 1050 ¶¶ 134–135; also citing Allergan, Inc. v. Sandoz Inc., 726 F.3d 1286, 1291–92 (Fed. Cir. 2013) (holding that “[t]he potential for FDA approval also may properly be considered, as it was here, in determining whether one of ordinary skill would be motivated to develop a drug product”).” slip op. at 14

    Claim construction§ 103 obviousnesscites Phillips · KSR
    Patents in suitUS 10,632,069
  • PTAB · Jun 3, 2025 · IPR2025-00055 · APJ Zhenyu Yang · IPR · Institution

    The Board instituted IPR on claims 1–42 on all asserted grounds, finding a reasonable likelihood that Dohil renders claim 35 obvious.

    RulingsInstitution decision
    • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

      “On this record and for purposes of institution, we find Petitioner’s analysis persuasive and adopt it as our own. Thus, we find Petitioner has established a reasonable likelihood of prevailing on its assertion that Dohil renders claim 35 obvious. We thus institute an inter partes review as to all challenges raised in the Petition. See SAS Institute, Inc. v. Iancu, 584 U.S. 357, 365–71 (2018); see also 37 C.F.R. § 42.108(a) (“When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.”).” slip op. at 10

    • Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed petitioner constructionDecided for petitioner

      “Petitioner notes that the ’407 patent defines (1) “orally disintegrating tablet,” “orally dispersing tablet,” or “ODT;” (2) “about;” and (3) “having no significant systemic glucocorticoid or mineralocorticoid activity.” Pet. 17–19 (citing Ex. 1001, 2:46–49; 2:62–3:3, 3:16–21). We adopt the express definitions of these terms as set forth in the ’407 patent Specification. See Multiform Dessicants, Inc. v. Medzam, Ltd., 133 F.3d 1473, 1478 (Fed. Cir. 1998) (“When the specification explains and defines a term used in the claims, without ambiguity or incompleteness, there is no need to search further for the meaning of the term.”).” slip op. at 6

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “Claim terms need only be construed to the extent necessary to resolve the controversy. Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011). On this record and for purposes of this Decision, we see no need to expressly construe these or any other claim terms.” slip op. at 6

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted

      “Petitioner contends that a POSA would have been motivated to follow the FDA Guidance (i.e., the guidance on the matter from the U.S. regulatory agency concerned with pharmaceuticals) in formulating Dohil’s rapidly dissolving lozenge or tablet containing budesonide. Id. at 25. According to Petitioner, a POSA seeking to formulate budesonide into an orally disintegrating pharmaceutical composition would have been motivated to follow the FDA Guidance that such a composition should disintegrate within thirty seconds or less when tested using the USP <701> Disintegration Test. Id. (citing Ex. 1053 ¶ 128). Petitioner also argues that a POSA would have had a reasonable expectation of success in doing so based on Dohil’s detailed description of how to formulate budesonide into a rapidly disintegrating lozenge or tablet. Id. (citing Ex. 1002 ¶¶ 27–41). According to Petitioner, formulating orally disintegrating tablets that dissolve within “several seconds to about a minute” would have been a routine exercise by 2009, the earliest possible priority date of the ’407 patent. Id. at 26 (citing Ex. 1005, 2; Ex. 1018, 434). Petitioner contends that, at that time, there were many orally disintegrating systems and products that were commercially available, which would have bolstered a POSA’s expectation of success. Id. (citing Ex. 1017, 179–181; Ex. 1018, 436–439; Ex. 1053 ¶ 129). Thus, Petitioner concludes that Dohil would have suggested to a POSA limitation 35[iv]. Id.” slip op. at 9

    Claim construction§ 103 obviousnesscites Phillips
    Patents in suitUS 9,486,407
  • PTAB · Jun 3, 2025 · IPR2025-00056 · APJ Ryan H Flax · IPR · Institution

    The Board instituted IPR on claims 1–30 and all three grounds, finding a reasonable likelihood that at least one claim would have been obvious over Perrett.

    RulingsInstitution decision
    • PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsInstitution denied 325dDenied

      “In determining whether to deny institution under § 325(d), we use the following two-part framework: (1) whether the same or substantially the same art previously was presented to the Office or whether the same or substantially the same arguments previously were presented to the Office; and (2) if either condition of [the] first part of the framework is satisfied, whether the petitioner has demonstrated that the Office erred in a manner material to the patentability of challenged claims. Advanced Bionics, LLC v. MED-EL Elektromedizinische Geräte GmbH, IPR2019-01469, Paper 6 at 8 (PTAB Feb. 13, 2020) (precedential) (“Advanced Bionics”). The Becton, Dickinson factors provide useful insight into how to apply the framework under 35 U.S.C. § 325(d). Id. at 9 (referencing Becton, Dickinson & Co. v. B. Braun Melsungen AG, IPR2017-” slip op. at 8

    • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

      “An inter partes review may be instituted if the information presented by a petitioner in the petition, in view of the patent owner’s preliminary response and the preliminary record, shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least one of the claims challenged in the petition. 35 U.S.C. § 314.” slip op. at 19

    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “A person of ordinary skill in the art (“POSA”) related to the ’061 patent would have a Ph.D., another advanced degree, or its equivalent, in areas related to pharmaceutics, chemistry, biology, medicine, or a related discipline, and 2-3 years of experience in formulation development. Alternatively, a POSA would have a lesser degree in those fields, with at least five or more years of experience in formulation development. The 8 See infra Section II.C. 9 At this stage of the proceeding, there is no evidence of objective indicia of obviousness or non-obviousness. POSA would also have had access to a medical doctor with a specialty in gastroenterology, and other individuals with expertise related to the above subjects. EX1070 ¶30. Pet. 5. At this stage of the proceeding, Patent Owner neither contests Petitioner’s proposed definition of the ordinarily skilled artisan nor provides an alternative definition. See generally Prelim. Resp. For the purposes of this Decision, we accept and use Petitioner’s proposed, and unopposed, definition of the ordinarily skilled artisan. It appears that Petitioner’s proposed definition comports with the high level of skill in the art reflected in the prior art of record and the ’061 patent, itself. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art itself [may] reflect[] an appropriate level” as evidence of the ordinary level of skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). D.” slip op. at 20

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownNo construction neededOther

      “When the specification explains and defines a term used in the claims, without ambiguity or incompleteness, there is no need to search further for the meaning of the term.” Multiform Dessicants, Inc. v. Medzam, Ltd., 133 F.3d 1473, 1478 (Fed. Cir. 1998). The Specification expressly states that “[t]he terms ‘orally disintegrating tablet’, ‘orally dispersing tablet’, or ‘ODT’ refer to a solid dosage form of the present invention, which disintegrates rapidly in the oral cavity of a patient after administration, without chewing.” Ex. 1001, 5:12–15. At this stage of the proceeding, we interpret the language “orally disintegrating tablet” / “orally dispersing tablet” / “ODT” to have the meaning as expressly set forth in the Specification, as noted above. slip op. at 23

    Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · Graham
    Patents in suitUS 11,260,061
  • PTAB · May 28, 2025 · IPR2024-00255 · APJ Annette R Reimers · IPR · Final written decision

    Claims 2, 4, and 6–10 are unpatentable as obvious over Bhattacharya and Zeng, and over Bhattacharya, Zeng, and Spain; claims 1, 3, and 11 were disclaimed.

    RulingsFinal written decision
    • Skill levelSkill level patent owner adoptedDecided for patent owner

      “Second, the key differences between Petitioner’s and Patent Owner’s proposed qualifications for a person of ordinary skill in the art at the time of the invention is that Patent Owner asserts “experience in wireless telecommunications and cellular technology is necessary,” as well as a background in radio frequency communications and/or navigation system technology with two years of industry experience working in the same, would be required. PO Resp. 22–23 (citing Ex. 2018 ¶ 46); see also id. 44– 45. The ’104 patent is directed to locating a wireless mobile device in a geographic region. Ex. 1001, 1:13–20; PO Resp. 44. Bhattacharya is 9 Patent Owner refers to IPR2024-01209, but the correct citation is IPR2023- 01209. See PO Resp. 22. 1005, code (57), ¶¶ 1, 13; PO Resp. 44. Zeng is directed to handoff from one cell to another in a wireless cellular communication system to achieve continuous service. Ex. 1006, 1; PO Resp. 44. Spain is directed to a method for locating the concentration of mobile radio traffic in a coverage area. Ex. 1007, code (54), ¶¶ 1, 11; PO Resp. 44. We find that there is support in the ’104 patent and prior art consistent with Patent Owner’s assertion that the qualifications of a person of skill in the art would include knowledge of radio navigation and mobile communications technology. Accordingly, we adopt Patent Owner’s proposed qualifications for a person of ordinary skill in the art.” slip op. at 8

    • Expert testimonyPetitioner expert creditedMixed

      “In this case, Patent Owner attempts to make much of Dr. Sundaresan’s statement that he had been informed of the qualifications of a person of ordinary skill in the art. See PO Resp. 41–43. Dr. Sundaresan’s testimony, however, set forth this understanding of the requisite level of skill in the art (Ex. 1003 ¶ 8). In his supplemental declaration, Dr. Sundaresan further testifies that: I agreed with this POSITA definition when preparing the Declaration, and I continue to hold the opinion that the POSITA definition is both correct and appropriate based on the disclosures of the ’104 patent and the prior art analyzed in the Declaration. Ex. 1055 ¶ 17. Dr. Sundaresan further testifies that “[i]f I did not agree with the POSITA definition, then it would not have been included in paragraph 8 of the Declaration.” Id. ¶ 18. Dr. Sundaresan’s inclusion of the definition of the level of ordinary skill in his original declaration indicates that he agrees with the definition, as confirmed by his cited subsequent testimony. We note that, even with Patent Owner’s arguments, the record is clear that Patent Owner was on notice of Petitioner’s proposed definition of the level of ordinary skill at the time of the Petition. Pet. 7; cf. Corephotonics, Ltd. v. Apple Inc., 84 F.4th 990, 1006 (Fed. Cir. 2023) (holding that Petitioner is not required to anticipate all arguments in its Petition and allowing consideration of reply where patent owner had sufficient notice of petitioner’s position and adequate opportunity to respond).” slip op. at 14

    • BurdenUnpatentable

      “Based on the evidence presented, Petitioner adequately establishes by a preponderance of the evidence that a person having ordinary skill in the art would have had reason to reach the Bhattacharya-Zeng combination with a reasonable expectation of success.” slip op. at 44

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

      “explained below, we agree with Petitioner that Patent Owner’s additional requirement of evaluating the calibration data to determine the boundaries of the area represented by a grid point should not be included in the construction of either “grid point” or “non-uniform grid point.” Instead, based on the full record, we discern no reason to alter our prior construction of “grid point” as “a point associated with representative calibration data for an area” and maintain that construction for this Final Written Decision. The construction of “grid point” we adopt is supported by the Specification of the ’104 patent. Namely, the ’104 patent discloses that “[i]n general, a non-uniform grid point (NUG) may represent the signal characteristics and/or calibration data over a given region,” and “NUGs represent an area of collected calibration data.”18 Ex. 1001, 3:50–60. The district court identified the second quoted passage, which is identically recited in the ’104 patent (see Ex. 2018, 3:56–60) as “provid[ing] a clear indication of the meaning of ‘grid point.’” Ex. 2012, 19 (emphasis added). We agree with the district court’s analysis. Although the ’104 patent does not explain how a generic “grid point” might differ from the described “nonuniform grid point,” we do not find this distinction pertinent to construing “grid point” in this case because neither party raises this issue. Also, based on the claim wording “non-uniform grid point,” a “non-uniform grid point” is a type of grid point. See Pet. Reply 3 (explaining why that plain meaning supports Petitioner’s proposed construction). Furthermore, the district court construed “grid point” only, not “non-uniform grid point.” Ex. 2012, 18–20.” slip op. at 27

    Patent outcomesUS 7,561,104 unpatentable
    Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 7,561,104
  • PTAB · May 28, 2025 · IPR2024-00235 · APJ Carl M Defranco · IPR · Final written decision

    Claims 1–6, 8, 10, and 14–16 are unpatentable as anticipated by Young and obvious over Young and Norrie; the Johnson and Belk ground was not reached.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “Provisur proposes that one of ordinary skill in the art would have had: (1) a bachelor’s degree (or equivalent) in mechanical engineering (or a similar field) and at least two years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field); or (2) at least seven years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field). Pet. 12. Weber does not contest Provisur’s framing of the level of ordinary skill in the art. See generally PO Resp. There being no dispute, we adopt Provisur’s definition of the level of skill in the art.” slip op. at 5

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “Provisur construes the claim terms “according to their plain and ordinary meanings as understood by a [person of ordinary skill in the art] in view of the specification and prosecution history” and posits that “[n]o terms require an explicit construction to resolve the unpatentability controversy between the parties here.” Pet. 13. Weber appears to agree, stating in the related district court action that “most of [its] patent claims are plain and ordinary . . . [t]hey’re not difficult or complex claims or claim terms.” Ex. 3 US 5,514,032, issued May 7, 1996 (Ex. 1004, “Young”). 4 US 4,979,269, issued Dec. 25, 1990 (Ex. 1005, “Norrie”). 5 US 6,929,540 B2, issued Aug. 16, 2005 (Ex. 1006, “Johnson”). 6 US 6,198,834 B1, issued Mar. 6, 2001 (Ex. 1007, “Belk”). 1028, 5. This being the case, we do not find the need to expressly construe any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (confirming that the Board need not construe claim terms where their construction is not material to the dispute).” slip op. at 5

    • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

      “without first determining how much fat existed to begin with, i.e., prior to the side of meat being trimmed. But, as Provisur correctly notes, Weber ignores what one skilled in the art reasonably would have understood from reading Young’s disclosure as a whole. See Pet. 30–36 (citing Ex. 1003 ¶¶ 104–106, 109–112); Pet. Reply 2–12. When that is done, one skilled in the art would have understood that a necessary premise of Young’s determination of the thickness of fat to remain on the loin is knowing the thickness of the fat to begin with, which Young’s imaging system 190 and imaging processing routine 240 determine by first analyzing a series of “fat/lean separation lines” and “edge lines” in the side of meat being trimmed. Pet. 30–32 (citing Ex. 1004, 17:34–62, 18:33–56, 22:53–24:38, Figs. 2, 13); Pet. Reply 3–7 (citing portions of same evidence). More specifically, as described in Young (and articulated by Provisur), the side of meat is placed fat side down on a product support, i.e., platen 20. See Ex. 1004, 7:16–21, Figs. 1, 2. Using several cameras—top plan camera 196, end view camera 197, and fat line camera 198—Young’s imaging system 190 acquires multiple images of the side of meat from various angles and under various lighting conditions to “provide image data regarding each side of [meat].” See id. at 17:34–18:56. That image data is then used by Young’s image processing routine 240 to generate a series of demarcation lines on the side of meat, including: (1) fat/lean separation lines (representing the interface between the loin meat and the fat layer along top, side, and end views of the meat product; and (2) edge lines (representing lines along the outer surface of the meat product). See id. at 22:53–23:67, Figs. 10, 13 (Blocks 242, 246, 250, 254). In addition, “a plurality of points (preferably 20) are generated for each of the fat/lean separation and edge lines using known pattern matching routines.” Id. at 23:28–30, Fig. 13 (Blocks 244, 248, 252, 256); see also id. at 23:61–63 (essentially same). The fat/lean separation and edge lines (and points therein) generated by Young’s image processing routine 240 are then used to calculate certain dimensions and characteristics of the side of meat, such as height, length, and width. Id. at 24:10–22, Fig. 13 (Block 258). As Provisur’s expert credibly testifies, one skilled in the art would have understood that the dimension from the fat/lean separation line to the edge line along the outer surface represents the thickness of fat cover on the side of meat, i.e., before the fat is trimmed. See Ex. 1003 ¶ 106. Insofar as how that dimension is used, Young states that controller 172 uses “dynamic (real time) image data” of the fat/lean separation and edge lines “to dynamically modify the cutting profile of the loin knife assembly 100 so that the assembly follows a fixed distance from the separation line to provide the optimum fat cover for the loin.” Ex. 1004, 18:32–45; see also id. at 17:48–52 (describing “real time processor” for “image processing routines”). Notably, according to Young, the “fixed distance” represents the “desired” thickness of fat that remains on the loin, after trimming, and “sufficiently keeps the loin from drying out, but doesn’t make the loin look too fat,” although “[o]ther fat thicknesses may be desired in the alternative.” Id. at 20:60–66; see also id. at 10:39–42 (“Through control of the knife blade along several axes, assembly 100 preferably produces an optimum separation between loin and belly, with a desired fat covering left on the loin.” (emphases added)). Because the desired thickness of fat cover is what remains on the loin” slip op. at 9

    • Strike new argumentNew argument consideredDecided for patent owner

      “argument that Weber considers vital to its dispute of Provisur’s showing for the claimed fat thickness determination. During oral hearing, Weber repeatedly argued that Provisur changed theories midstream, i.e., between the time of the petition and the hearing. See Hrg. Tr. 22:18–24:47; see also id. at 31:14–22, 33:8–18, 34:16–20, 49:17–50:15, 54:16–56:25 (repeating same argument). More specifically, according to Weber, Provisur originally relied only on image data from Young’s “top view” camera as processed in “block 246” of Young’s image processing routine 240 when showing how Young meets the claimed fat thickness determination, whereas now Provisur relies on image data from Young’s “end view” cameras as processed in “Block 254.” Compare PO Sur-Reply 3–6 (focusing on Young’s “top view camera” in “block 246”), with Hrg. Tr. 27:4–16 (“[Block] 246, which is what they relied on, is processing images from the top-view camera in Young’s system. It is generating lines from the top-view camera in Young’s system. What they are newly trying to rely on today, for the first time, is Block 254 that is discussed toward the bottom of column 23 in Young, and that analyzes different images from a different camera. It is the end camera. It generates different lines. It demonstrates an end fat/lean line and an end edge line. Prior to today’s hearing, neither Petitioner, nor its expert, had ever discussed Block 254. You will not find a single reference to 254 in their papers, nor have they discussed the end edge line. It is completely new today. It finds absolutely no support in the record.” (emphases added)). We disagree with Weber’s contention. As shown and described in the petition, Provisur relies on more than simply Young’s “top view” camera and “block 246.” See Pet. 29–31. Rather, in its petition, Provisur annotates Young’s Figure 2 to show that image data from all three cameras of “imaging system 190”—“top plan camera 196, end view camera 197, [and] fat line camera 198”—play a role in the determination of fat thickness.8 Id. at 30. Moreover, Provisur cites the entire process depicted in “Figure 13” and described in columns “22:53–24:38” of Young as critical to the determination. Id. at 31. Those cited portions of Young involve not only the analysis of fat/lean and edge lines from “top view” images (block 246), but also the analysis of fat/lean and edge lines from “end view” images (blocks 250 and 254). See Ex. 1004, 23:12–24:13. In other words, Provisur’s showing for the claimed fat thickness determination is based on Young’s collective analysis of all those images. Indeed, Provisur’s expert confirms as much when confronted by Weber on cross-examination— Q. How does [Young] use the other cameras to identify that fat/lean separation line? A. Again, this is a -- this is a three-dimensional product that’s not regular, and all the views basically are needed to be able to describe that complex three-dimensional shape, so that the knife will be able to cut at that -- at that line, offset by whatever desired thickness there is, on that three-dimensional shape. Ex. 2006, 25:15–27:19 (emphasis added). 8 Indeed, contrary to Weber’s assertion, Provisur highlights “fat lean separation camera 198,” not top view camera 196, as most critical to the determination of fat thickness. Pet. 31. In the end, we reject the notion that Provisur changed theories” slip op. at 12

    Patent outcomesUS 8,529,321 unpatentable
    Claim construction§ 102 anticipation§ 103 obviousness
    Patents in suitUS 8,529,321

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.