- PTAB · Jun 3, 2025 · IPR2025-00056 · APJ Ryan H Flax · IPR · Institution
The Board instituted IPR on claims 1–30 and all three grounds, finding a reasonable likelihood that at least one claim would have been obvious over Perrett.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsInstitution denied 325dDenied
“In determining whether to deny institution under § 325(d), we use the following two-part framework: (1) whether the same or substantially the same art previously was presented to the Office or whether the same or substantially the same arguments previously were presented to the Office; and (2) if either condition of [the] first part of the framework is satisfied, whether the petitioner has demonstrated that the Office erred in a manner material to the patentability of challenged claims. Advanced Bionics, LLC v. MED-EL Elektromedizinische Geräte GmbH, IPR2019-01469, Paper 6 at 8 (PTAB Feb. 13, 2020) (precedential) (“Advanced Bionics”). The Becton, Dickinson factors provide useful insight into how to apply the framework under 35 U.S.C. § 325(d). Id. at 9 (referencing Becton, Dickinson & Co. v. B. Braun Melsungen AG, IPR2017-” slip op. at 8
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“An inter partes review may be instituted if the information presented by a petitioner in the petition, in view of the patent owner’s preliminary response and the preliminary record, shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least one of the claims challenged in the petition. 35 U.S.C. § 314.” slip op. at 19
- Skill levelSkill level petitioner adoptedDecided for petitioner
“A person of ordinary skill in the art (“POSA”) related to the ’061 patent would have a Ph.D., another advanced degree, or its equivalent, in areas related to pharmaceutics, chemistry, biology, medicine, or a related discipline, and 2-3 years of experience in formulation development. Alternatively, a POSA would have a lesser degree in those fields, with at least five or more years of experience in formulation development. The 8 See infra Section II.C. 9 At this stage of the proceeding, there is no evidence of objective indicia of obviousness or non-obviousness. POSA would also have had access to a medical doctor with a specialty in gastroenterology, and other individuals with expertise related to the above subjects. EX1070 ¶30. Pet. 5. At this stage of the proceeding, Patent Owner neither contests Petitioner’s proposed definition of the ordinarily skilled artisan nor provides an alternative definition. See generally Prelim. Resp. For the purposes of this Decision, we accept and use Petitioner’s proposed, and unopposed, definition of the ordinarily skilled artisan. It appears that Petitioner’s proposed definition comports with the high level of skill in the art reflected in the prior art of record and the ’061 patent, itself. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art itself [may] reflect[] an appropriate level” as evidence of the ordinary level of skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). D.” slip op. at 20
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownNo construction neededOther
“When the specification explains and defines a term used in the claims, without ambiguity or incompleteness, there is no need to search further for the meaning of the term.” Multiform Dessicants, Inc. v. Medzam, Ltd., 133 F.3d 1473, 1478 (Fed. Cir. 1998). The Specification expressly states that “[t]he terms ‘orally disintegrating tablet’, ‘orally dispersing tablet’, or ‘ODT’ refer to a solid dosage form of the present invention, which disintegrates rapidly in the oral cavity of a patient after administration, without chewing.” Ex. 1001, 5:12–15. At this stage of the proceeding, we interpret the language “orally disintegrating tablet” / “orally dispersing tablet” / “ODT” to have the meaning as expressly set forth in the Specification, as noted above. slip op. at 23
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · GrahamPatents in suitUS 11,260,061 - Provisur Technologies, Inc. v. Weber Food Technology GmbHAll claims unpatentablePTAB · May 28, 2025 · IPR2024-00235 · APJ Carl M Defranco · IPR · Final written decision
Claims 1–6, 8, 10, and 14–16 are unpatentable as anticipated by Young and obvious over Young and Norrie; the Johnson and Belk ground was not reached.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Provisur proposes that one of ordinary skill in the art would have had: (1) a bachelor’s degree (or equivalent) in mechanical engineering (or a similar field) and at least two years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field); or (2) at least seven years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field). Pet. 12. Weber does not contest Provisur’s framing of the level of ordinary skill in the art. See generally PO Resp. There being no dispute, we adopt Provisur’s definition of the level of skill in the art.” slip op. at 5
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Provisur construes the claim terms “according to their plain and ordinary meanings as understood by a [person of ordinary skill in the art] in view of the specification and prosecution history” and posits that “[n]o terms require an explicit construction to resolve the unpatentability controversy between the parties here.” Pet. 13. Weber appears to agree, stating in the related district court action that “most of [its] patent claims are plain and ordinary . . . [t]hey’re not difficult or complex claims or claim terms.” Ex. 3 US 5,514,032, issued May 7, 1996 (Ex. 1004, “Young”). 4 US 4,979,269, issued Dec. 25, 1990 (Ex. 1005, “Norrie”). 5 US 6,929,540 B2, issued Aug. 16, 2005 (Ex. 1006, “Johnson”). 6 US 6,198,834 B1, issued Mar. 6, 2001 (Ex. 1007, “Belk”). 1028, 5. This being the case, we do not find the need to expressly construe any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (confirming that the Board need not construe claim terms where their construction is not material to the dispute).” slip op. at 5
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“without first determining how much fat existed to begin with, i.e., prior to the side of meat being trimmed. But, as Provisur correctly notes, Weber ignores what one skilled in the art reasonably would have understood from reading Young’s disclosure as a whole. See Pet. 30–36 (citing Ex. 1003 ¶¶ 104–106, 109–112); Pet. Reply 2–12. When that is done, one skilled in the art would have understood that a necessary premise of Young’s determination of the thickness of fat to remain on the loin is knowing the thickness of the fat to begin with, which Young’s imaging system 190 and imaging processing routine 240 determine by first analyzing a series of “fat/lean separation lines” and “edge lines” in the side of meat being trimmed. Pet. 30–32 (citing Ex. 1004, 17:34–62, 18:33–56, 22:53–24:38, Figs. 2, 13); Pet. Reply 3–7 (citing portions of same evidence). More specifically, as described in Young (and articulated by Provisur), the side of meat is placed fat side down on a product support, i.e., platen 20. See Ex. 1004, 7:16–21, Figs. 1, 2. Using several cameras—top plan camera 196, end view camera 197, and fat line camera 198—Young’s imaging system 190 acquires multiple images of the side of meat from various angles and under various lighting conditions to “provide image data regarding each side of [meat].” See id. at 17:34–18:56. That image data is then used by Young’s image processing routine 240 to generate a series of demarcation lines on the side of meat, including: (1) fat/lean separation lines (representing the interface between the loin meat and the fat layer along top, side, and end views of the meat product; and (2) edge lines (representing lines along the outer surface of the meat product). See id. at 22:53–23:67, Figs. 10, 13 (Blocks 242, 246, 250, 254). In addition, “a plurality of points (preferably 20) are generated for each of the fat/lean separation and edge lines using known pattern matching routines.” Id. at 23:28–30, Fig. 13 (Blocks 244, 248, 252, 256); see also id. at 23:61–63 (essentially same). The fat/lean separation and edge lines (and points therein) generated by Young’s image processing routine 240 are then used to calculate certain dimensions and characteristics of the side of meat, such as height, length, and width. Id. at 24:10–22, Fig. 13 (Block 258). As Provisur’s expert credibly testifies, one skilled in the art would have understood that the dimension from the fat/lean separation line to the edge line along the outer surface represents the thickness of fat cover on the side of meat, i.e., before the fat is trimmed. See Ex. 1003 ¶ 106. Insofar as how that dimension is used, Young states that controller 172 uses “dynamic (real time) image data” of the fat/lean separation and edge lines “to dynamically modify the cutting profile of the loin knife assembly 100 so that the assembly follows a fixed distance from the separation line to provide the optimum fat cover for the loin.” Ex. 1004, 18:32–45; see also id. at 17:48–52 (describing “real time processor” for “image processing routines”). Notably, according to Young, the “fixed distance” represents the “desired” thickness of fat that remains on the loin, after trimming, and “sufficiently keeps the loin from drying out, but doesn’t make the loin look too fat,” although “[o]ther fat thicknesses may be desired in the alternative.” Id. at 20:60–66; see also id. at 10:39–42 (“Through control of the knife blade along several axes, assembly 100 preferably produces an optimum separation between loin and belly, with a desired fat covering left on the loin.” (emphases added)). Because the desired thickness of fat cover is what remains on the loin” slip op. at 9
- Strike new argumentNew argument consideredDecided for patent owner
“argument that Weber considers vital to its dispute of Provisur’s showing for the claimed fat thickness determination. During oral hearing, Weber repeatedly argued that Provisur changed theories midstream, i.e., between the time of the petition and the hearing. See Hrg. Tr. 22:18–24:47; see also id. at 31:14–22, 33:8–18, 34:16–20, 49:17–50:15, 54:16–56:25 (repeating same argument). More specifically, according to Weber, Provisur originally relied only on image data from Young’s “top view” camera as processed in “block 246” of Young’s image processing routine 240 when showing how Young meets the claimed fat thickness determination, whereas now Provisur relies on image data from Young’s “end view” cameras as processed in “Block 254.” Compare PO Sur-Reply 3–6 (focusing on Young’s “top view camera” in “block 246”), with Hrg. Tr. 27:4–16 (“[Block] 246, which is what they relied on, is processing images from the top-view camera in Young’s system. It is generating lines from the top-view camera in Young’s system. What they are newly trying to rely on today, for the first time, is Block 254 that is discussed toward the bottom of column 23 in Young, and that analyzes different images from a different camera. It is the end camera. It generates different lines. It demonstrates an end fat/lean line and an end edge line. Prior to today’s hearing, neither Petitioner, nor its expert, had ever discussed Block 254. You will not find a single reference to 254 in their papers, nor have they discussed the end edge line. It is completely new today. It finds absolutely no support in the record.” (emphases added)). We disagree with Weber’s contention. As shown and described in the petition, Provisur relies on more than simply Young’s “top view” camera and “block 246.” See Pet. 29–31. Rather, in its petition, Provisur annotates Young’s Figure 2 to show that image data from all three cameras of “imaging system 190”—“top plan camera 196, end view camera 197, [and] fat line camera 198”—play a role in the determination of fat thickness.8 Id. at 30. Moreover, Provisur cites the entire process depicted in “Figure 13” and described in columns “22:53–24:38” of Young as critical to the determination. Id. at 31. Those cited portions of Young involve not only the analysis of fat/lean and edge lines from “top view” images (block 246), but also the analysis of fat/lean and edge lines from “end view” images (blocks 250 and 254). See Ex. 1004, 23:12–24:13. In other words, Provisur’s showing for the claimed fat thickness determination is based on Young’s collective analysis of all those images. Indeed, Provisur’s expert confirms as much when confronted by Weber on cross-examination— Q. How does [Young] use the other cameras to identify that fat/lean separation line? A. Again, this is a -- this is a three-dimensional product that’s not regular, and all the views basically are needed to be able to describe that complex three-dimensional shape, so that the knife will be able to cut at that -- at that line, offset by whatever desired thickness there is, on that three-dimensional shape. Ex. 2006, 25:15–27:19 (emphasis added). 8 Indeed, contrary to Weber’s assertion, Provisur highlights “fat lean separation camera 198,” not top view camera 196, as most critical to the determination of fat thickness. Pet. 31. In the end, we reject the notion that Provisur changed theories” slip op. at 12
Patent outcomesUS 8,529,321 unpatentableClaim construction§ 102 anticipation§ 103 obviousnessPatents in suitUS 8,529,321 - PTAB · May 23, 2025 · IPR2025-00196 · APJ Ryan H Flax · IPR · Institution
The Board instituted IPR on claims 1–16 under both § 103 grounds, finding a reasonable likelihood that at least one claim would have been obvious over Best-2008 and Osada.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“Under our current guidance, the filing of a Sotera-type stipulation is not conclusive, but remains “highly relevant” and will be considered “as part of [our] holistic analysis” here. See Guidance Memo. Whether Petitioner has other bases for invalidating the ’457 patent, such as the CarnoJet prior art product identified in the district court, is not a consideration here if such bases could not be asserted in this proceeding (and are not being used to argue over the asserted prior art here as a loop hole from the stipulation, of which there is no evidence).” slip op. at 15
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“satisfied that Petitioner has met its burden for institution. No argument by Patent Owner persuades us otherwise. Petitioner has shown that each limitation and element of claim 1 is taught or suggested by the combination of Best-2008 and Osada. Moreover, Petitioner’s asserted reason to combine the references is supported by the references’ disclosures: Best-2008 suggests filtration of its coolant is desirable, but provides no specific means for doing so; Osada teaches a way of filtering fluid from an open-top tank, similar to Best-2008’s.” slip op. at 42
- Skill levelSkill level petitioner adoptedDecided for petitioner
“A POSITA[12]in the field of the ’457 patent at the time of the earliest possible effective filing date (December 14, 2012) would have had Bachelor of Science degree in mechanical or chemical engineering and at least two years of experience relating to the design and/or implementation of fluid circulation systems involving application of fluid dynamics and heat transfer principles. Additional education may serve as a substitute for a lack of experience and vice versa. (Ex-1003- Dahm at ¶¶36-41, 63-70.) Pet. 18–19. Patent Owner applies this same definition. Prelim. Resp. 6–7. At this stage of the proceeding, we accept and use Petitioner’s proposed and unopposed definition of the ordinarily skilled artisan. It appears that Petitioner’s proposed definition comports with the level of skill in the art reflected in the prior art of record and the ‘457 patent, itself. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art” slip op. at 20
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Although either of the district court proceedings’ definitions of the term “weir” appears to accurately describe the feature, at this stage of the proceeding, we do not find it necessary to expressly interpret this claim language.” slip op. at 23
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · GrahamPatents in suitUS 10,405,457 - PTAB · May 16, 2025 · IPR2024-01487 · APJ Julia Heaney · IPR · Institution
The Board instituted IPR on all challenged claims and grounds, finding a reasonable likelihood that claim 1 would have been obvious over Nakazawa and Glaug.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Institution of an inter partes review is authorized by statute when “the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Upon consideration of the Petition in view of the record at this stage, we determine that Petitioner has established a reasonable likelihood that it would prevail in showing the unpatentability of at least one claim challenged in the Petition. We also determine that the arguments and evidence of record do not support discretionary denial of the Petition under 35 U.S.C. § 314(a). Accordingly, we grant institution of an inter partes review of all claims and all grounds asserted in the Petition.1” slip op. at 2
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“person of ordinary skill would modify either Nakazawa’s diffusion sheet or Glaug’s fluid acquisition system, but rather Petitioner argues “various layers in absorbent articles are invariably interchangeable.” Prelim. Resp. 41–42. Contrary to Patent Owner’s argument, as discussed above, Petitioner explains why and how a person of ordinary skill would modify Nakazawa’s diffusion sheet, and provides reasons for doing so. On this record, we find Petitioner’s reasoning sufficient.” slip op. at 24
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner
“Patent Owner further argues Nakazawa teaches away from Petitioner’s asserted modification in which Glaug’s lower non-perforated layer is added to Nakazawa’s diffusion sheet. Prelim. Resp. 42. Specifically, Patent Owner argues Nakazawa teaches that its embodiment in which the second absorbent material is wrapped in a hydrophilic sheet has the advantage of preventing leakage of super absorbent polymer (“SAP”) from the second absorbent material without impeding permeation of excretory fluid through the hydrophilic sheet. Id. at 43 (citing Ex. 1008 ¶ 85, Fig. 15). Patent Owner further relies on Petitioner’s argument that Nakazawa’s hydrophilic layer is analogous to the lower non-perforated layer in Glaug. Id. (citing Pet. 93–94). Therefore, Patent Owner argues, Nakazawa teaches that Glaug’s fluid acquisition system would impede permeation of fluid rather than promote it. Id. Patent Owner’s teaching away argument is unavailing based on the current record. Patent Owner improperly relies on Petitioner’s contention in its anticipation challenge based on Nakazawa, and characterizes it as an argument about Glaug. As further discussed in Section II.G below, Petitioner’s anticipation challenge is based on analogizing Nakazawa’s hydrophilic sheet to a core wrap feature identified in Patent Owner’s infringement contention in parallel district court litigation. See Pet. 92–93. Contrary to Patent Owner’s argument, Petitioner’s obviousness contention does not argue Nakazawa’s hydrophilic layer is analogous to Glaug’s nonperforated fibrous layer. Because Patent Owner is not properly characterizing Petitioner’s obviousness contention, Patent Owner’s teaching away argument is not persuasive.” slip op. at 24
- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“Under Fintiv, we consider the following factors: 1. whether the court granted a stay or evidence exists that one may be granted if a proceeding is instituted; 2. proximity of the court’s trial date to the Board’s projected statutory deadline for a final written decision; 3. investment in the parallel proceeding by the court and the parties; 4. overlap between issues raised in the petition and in the parallel proceeding; 5. whether the petitioner and the defendant in the parallel proceeding are the same party; and 6. other circumstances that impact the Board’s exercise of discretion, including the merits. Fintiv at 5–6.” slip op. at 35
Claim construction§ 103 obviousnessDiscretionary denialcites KSR · GrahamPatents in suitUS 9,308,138 - PTAB · Apr 25, 2025 · IPR2024-01463 · APJ David Cotta · IPR · Institution
The Board instituted inter partes review of claims 1–10 on all asserted grounds, finding a reasonable likelihood of success on at least one claim.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner
“predict how the district court in the related district court litigation will proceed because the court may determine whether or not to stay any individual case . . . based on a variety of circumstances and facts beyond our control and to which the Board is not privy.” Sand Revolution II LLC v. Cont’l Intermodal Grp., IPR2019-01393, Paper 24, 7 (PTAB June 16, 2020) (informative). We decline to speculate on how the court may rule on the pending motion to stay. Accordingly, this factor is neutral.” slip op. at 13
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Under 35 U.S.C. § 314(a), inter partes review may not be instituted unless the Petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Petitioner has established a reasonable likelihood of prevailing on its assertion that at least one of the challenged claims is unpatentable based on the grounds advanced here. We decline to deny the Petition on a discretionary basis as requested by Patent Owner. Thus, for reasons explained below, we institute inter partes review of claims 1–10 of the ’706 patent.” slip op. at 2
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“TC(220), and ΔRz/Ra are result effective variables and that copper foils having ΔPD, TC(220), and ΔRz/Ra values that meet the values recited in claim 1 have advantageous properties. See, e.g., Ex. 1005 ¶ 45 (Kim ’761, disclosing that preferably the “difference in peak count roughness Rpc between the shiny surface . . . and the matte surface . . . of the electrolytic copper foil . . . is preferably 60 or less” because “when the difference in the peak count roughness Rpc exceeds 60 capacity maintenance of the secondary battery is deteriorated.”);15 Ex. 1007, 3:16–23, 4:14–23 (Cheng, disclosing that the foils of Cheng’s invention have (220) and (311) surfaces that provide increased elongation and that solve a high roughness problem that rendered traditional products unsuitable for use in a lithium ion secondary battery), 10:27–34 (Cheng, disclosing that in the foils of Cheng’s invention “the roughness difference between both sides was extremely small” and thus “it was . . . not easy for the electrolytic copper foil to break or fracture during the charging-discharging cycles and the life of a battery is thus increased”), Tables 3 & 4 (Cheng, disclosing embodiments and comparative examples with TC(220) values meeting the requirements of claim 1); Ex. 1008, 6:36–44 (Wolski, disclosing that “the surface roughness Rz at the matte side of the untreated copper foil of the present invention is the same or smaller than the surface roughness Rz at the shiny side . . . so that the surface treated copper foil . . . becomes more low-profiled . . . whereby it becomes a foil having a large etching factor”), 9:1–29 & Table 2 (Wolski, disclosing 15 Dr. Randall testifies that “Kim ’761’s peak count roughness Rpc corresponds to the peak density PD of the ’706 patent.” Ex. 1003 ¶ 52. At this stage in the proceeding, this testimony is unrebutted. 38 embodiments meeting the ΔRz/Ra of claim 1, describing them as having “matte side roughnesses” that are “sufficiently small,” and as having “excellent” “high temperature elongation characteristics”), 11:37–41 (Wolski, describing comparative examples as having “large” matte side roughnesses “whereby etching factors are not good”), 12:12–27 (Wolski, teaching that “as compared with a conventional untreated copper foil, both surfaces of the untreated copper foil obtained by [Wolski’s] invention are flat” resulting in a low profile foil that has “excellent elongations at room temperature and high temperature and also high tensile strength”). The teachings in the prior art support the presently unrebutted testimony of Dr. Randall explaining why the POSA would have been motivated to modify Kim ’761’s copper foil to have the claimed TC(220) and ΔRz/Ra. Ex. 1003 ¶¶ 66–68, 71–74; Pfizer Inc., v. Sanofi Pasteur Inc., 94 F.4th 1341, 1348 (Fed. Cir. 2024) (“Where [a gap in prior art] includes a parameter not necessarily disclosed in the prior art, it is not improper to consider whether or not it would have been recognized as result-effective. If so, then the optimization of that parameter is ‘normally obvious.’”). Accordingly, we are not persuaded by Patent Owner’s argument that Petitioner failed to articulate a sufficient motivation to combine the references. To the contrary, the preliminary record presents a strong showing that the POSA would have been motivated to combine the references in the manner described in the Petition.” slip op. at 38
- Skill levelSkill level petitioner adoptedDecided for petitioner
“At this stage of the proceeding, Patent Owner does not contest Petitioner’s definition of the level of skill in the art. Prelim. Resp. 4 (“For purposes of this Preliminary Response, Patent Owner applies Petitioner’s level of skill for a person of ordinary skill in the art”). Petitioner’s definition appears to be consistent with the field of the invention reflected in the prior art of record and the disclosure of the ’706 patent. Accordingly, for purposes of this Decision, we adopt Petitioner’s proposed definition of the person of ordinary skill in the art.” slip op. at 21
Claim construction§ 103 obviousnessDiscretionary denialcites KSR · GrahamPatents in suitUS 11,591,706 - Solus Advanced Materials Co., Ltd. v. SK Nexilis Co., Ltd.Institution deniedPTAB · Apr 25, 2025 · IPR2024-01462 · APJ Jo-Anne M Kokoski · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–8 were unpatentable under the asserted obviousness grounds.
RulingsInstitution decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“experience working on the development of materials or components for electronic devices such as batteries.” Pet. 2. Petitioner further contends that “[a]dditional education, such as a graduate degree, could compensate for less work experience, and additional work experience could compensate for less formal education.” Id. Patent Owner states that, “[f]or purposes of this Preliminary Response, Patent Owner applies Petitioner’s level of skill for a person of ordinary skill in the art.” Prelim. Resp. 4. For purposes of this Decision, we adopt Petitioner’s undisputed proposed definition because it appears to be consistent with the cited prior art and the disclosure of the ’014 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their plain and ordinary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. Realtime Data LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). in this proceeding.” Pet. 3. Patent Owner contends that “[t]he Board need not construe any term in order to determine that institution should be denied.” Prelim. Resp. 4. Based on the record before us, we determine that no claim term requires express construction for purposes of this Decision. See Realtime Data, 912 F.3d at 1375.” slip op. at 8
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“For these reasons, we are not persuaded that Petitioner sufficiently establishes that a POSITA would have been motivated to modify Hanafusa in light of Dobashi with a reasonable expectation of success as Petitioner contends. Accordingly, we determine that Petitioner fails to demonstrate a reasonable likelihood of prevailing in its assertion that the subject matter of claim 1, and claims 4 and 8 that depend therefrom, would have been obvious over the combined teachings of Hanafusa and Dobashi.” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“Petitioner also focuses on Hanafusa’s teaching that all known methods can be used to make a rough surface low-profile, and Dobashi’s teaching that RSm can be used as an indicator for judgment of the surface, to support its contention that a POSITA would have been motivated to apply Dobashi’s RSm to further achieve Hanafusa’s purpose, without explaining how and why that would be the case. In particular, neither Petitioner nor Dr. Josefowicz adequately explain why a POSITA looking for ways to make Hanafusa’s surface roughness low-profile would look to methods to achieve as the period of waviness, RSm can also be used as an indicator for judgment of the surface.” Ex. 1005, 2:66–3:1, 6:23–26. Dobashi explains that waviness is “an indicator for determining whether the fine pattern forming performance is good or bad,” and “[t]he surface has small waviness and is smooth when RSm is large, and the surface has large waviness and is rough when RSm is small.” Id. at 3:1–3, 6:27–29. Dobashi also teaches that surface roughness Rzjis is used as a low-profile indicator. Ex. 1005, 2:66– 3:1. Dobashi, therefore, teaches that RSm is an indicator of surface waviness, which Dobashi explains is different than surface roughness. Id. at 2:66–3:3, 6:23–29. Given these teachings in Dobashi, neither Petitioner nor Dr. Josefowicz sufficiently explains how or why a POSITA would have been motivated to implement Dobashi’s RSm values to make Hanafusa’s surface roughness low-profile. See Pet. 10–12; Ex. 1003 ¶¶ 46–52.” slip op. at 14
Claim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 11,346,014 - Arthrex, Inc. v. Medshape, Inc.Institution deniedPTAB · Apr 25, 2025 · IPR2025-00053 · APJ James A Tartal · IPR · Institution
The Board denied institution of IPR challenging claims 1–10, exercising § 314(a) discretion because the Fintiv factors, considered holistically, favored denial.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied discretionary otherInstitution denied
“review. 35 U.S.C. § 314(b) (2018); 37 C.F.R. § 42.4(a) (2023). An inter partes review may not be instituted “unless . . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). However, institution of inter partes review is discretionary. Upon consideration of the Petition, the Preliminary Response, the Preliminary Reply, the Preliminary Sur-reply, and the evidence of record, we exercise our discretion to deny institution of inter partes review under 35 U.S.C. § 314(a) in view of the co-pending district court litigation.” slip op. at 2
- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“7. Balancing the Fintiv Factors As discussed above, factors 1 and 3–5 each favor denial. Factor 2 is the only factor that favors institution because there is no trial date in the Parallel Proceeding and the evidence presented of a median time-to-trial for civil trials in that district suggests a potential trial date after the statutory deadline for a final written decision in this proceeding. However, Patent Owner also shows that discovery and any dispositive motions will be completed in the Parallel Proceeding well before the statutory deadline for a final written decision in this proceeding, which presents a risk of duplicated efforts given the unmitigated overlap in issues between proceedings. On balance, considerations concerning an uncertain trial date in the Parallel Proceeding under Factor 2 do not outweigh the more substantial reasons identified under the other Fintiv Factors. Thus, considering all of the factors holistically, we find on balance that the factors on this unique record weigh in favor of discretionary denial of the Petition. Accordingly, we exercise discretion to deny institution under 35 U.S.C. § 314(a).” slip op. at 15
Discretionary denialPatents in suitUS 7,985,222 - PLR Worldwide Sales Ltd. v. Flip Phone Games, Inc.Some claims unpatentablePTAB · Apr 24, 2025 · IPR2024-00209 · APJ Scott B Howard · IPR · Final written decision
Claims 1–11 and 13–19 are unpatentable as obvious over Ho and Aoki; claims 12 and 20 were not shown unpatentable over Jiau and Aoki or Jiau and Kim.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“Patent Owner argues for a slightly different level of ordinary skill in the art: “a bachelor’s degree in electrical engineering, computer engineering, computer science, or a similar field, along with one to two years of experience developing or programming video games or video game systems, or similar types of computer systems.” PO Resp. 2 (citing Ex. 2006 ¶ 29). Patent Owner further argues that the person having ordinary skill in the art “may have additional education that might substitute for some of the experience, and additional experience might substitute for some of the educational background.” Id. (citing Ex. 2006 ¶ 29). According to Patent Owner, Petitioner’s proposal does not require experience in programming video games. Id. at 3. However, Patent Owner states, “[t]his difference does not materially affect the analysis presented below.” Id. We see very little difference between the parties’ respective proposals. We adopt Patent Owner’s marginally more specific proposal. Additionally, because we would reach the same conclusions under Petitioner’s proposal, we agree with Patent Owner that this does not affect our analysis.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Patent Owner argues that the plain and ordinary meaning of “downloading” excludes “real-time fetching of data by a client from a server system.” PO Resp. 34; see also PO Sur-reply 16–17; Tr. 32:22–34:7. Because we need not expressly construe any claim terms, we do not construe any terms of the ’662 patent. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Matal, 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 11
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedReference is prior artDecided for petitioner
“date of the ’662 patent, Ho is not a “printed publication” within the meaning of 35 U.S.C. § 311(b). PO Resp. 30–33; PO Sur-reply 15–16. The Federal Circuit has rejected this argument, holding that: a published patent application is, by its literal terms, a “printed publication.” So, when § 311(b) permits IPR challenges based upon “prior art . . . printed publications,” it includes within its literal scope challenges based upon a published patent application. And, by virtue of § 102(e)(1), a published patent application—this specific type of “printed publication”—is deemed prior art as of its filing date. Therefore, the plain language of §§ 311(b) and 102(e)(1) permits IPR challenges based upon published patent applications, and such published patent applications can be deemed prior art in IPRs as of their filing date. Lynk Labs, Inc. v. Samsung Elecs. Co., 125 F.4th 1120, 1127 (Fed. Cir. 2025). Thus, Petitioner asserts permissible grounds of unpatentability under 35 U.S.C. § 311(b) by arguing that claims 1–20 are unpatentable under 35 U.S.C. § 103(a) on the basis of Ho, which is a prior art printed publication, and either Aoki or Kim.” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“A person having ordinary skill in the art would have combined Aoki’s teaching of using user-identification information as part of the request for an advertisement with Ho’s system, which also teaches a client device sending information to a server to request hot spot information, such as advertisements. See Ex. 1003 ¶¶ 103–107, 111, 114, 117. Because both Ho and Aoki are directed to improvements in game design and monetization from using advertisements (id. ¶ 106; Ex. 1004, 1:26–28; Ex. 1005 ¶¶ 6–8), a person having ordinary skill in the art would have looked at both Ho and Aoki and combined the relevant features with a reasonable expectation of success (Ex. 1003 ¶¶ 103, 106, 117). A person having ordinary skill in the art would have appreciated that using Aoki’s teaching of sending user-identification information with Ho, which includes sending information with a request for information relating to interactive information elements (hot spots), allows for targeted advertisements, which was a known advantage in advertising. Id. ¶ 117; Ex. 10089 ¶¶ 54–55 (describing advantages of targeted advertising).” slip op. at 26
Patent outcomesUS 9,427,662 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,427,662 - PLR Worldwide Sales Limited v. Flip Phone Games, Inc.All claims unpatentablePTAB · Apr 24, 2025 · IPR2024-00200 · APJ Daniel J Galligan · IPR · Final written decision
Claims 1–16 are unpatentable as obvious over Hays; the Board also found claims 8 and 16 obvious over Hays and Choi.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“had an undergraduate degree in game design or development, computer science, computer engineering, or a related field, with at least two years of experience working with computer gaming systems or software application development.” Pet. 2 (citing Ex. 1003 ¶¶ 65–69). Petitioner also contends that “[l]ess work experience may be compensated by a higher level of education or vice versa.” Pet. 2–3 (citing Ex. 1003 ¶¶ 65–69). skilled artisan “would have a bachelor’s degree in electrical engineering, computer engineering, computer science, or a similar field, along with one to two years of experience developing or programming video games or video game systems, or similar types of computer systems,” but notes that a skilled artisan “may have additional education that might substitute for some of the experience, and additional substantial experience might substitute for some of the educational background.” PO Resp. 2 (citing Ex. 2004 ¶ 28). According to Patent Owner, Petitioner’s proposal does not require experience in programming video games. PO Resp. 3. However, Patent Owner states, “[t]his difference does not materially affect the analysis presented below.” PO Resp. 3. We see very little difference between the parties’ respective proposals. We adopt Patent Owner’s more specific proposal because it is consistent with the level of skill evidenced in the ’056 patent and the applied prior art, but we agree with Patent Owner that this does not affect our analysis; we would reach the same conclusions under Petitioner’s proposal.” slip op. at 5
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“The claim language itself suggests no such restrictions. Rather, all the claim language recites is video-game content that is for use in the video game. The claim language does not specify who or what must use the content or how it must be used. Thus, the claim language itself is broad and includes none of the restrictions Patent Owner would place on it.” slip op. at 8
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“Hays discloses that an advertiser can target particular ads at particular times, such as “air[ing] the Domino’s ad campaign” after a “game has been played for 45 minutes.” Ex. 1005 ¶ 22. Thus, an advertiser selects ads to run, and those ads become part of the pool from which the advertising matching and weighting system selects ads. See Ex. 1005 ¶ 22 (“Based on information associated with each of the available ad units (e.g., current game environment, game title genre, predicted player demographic information for current available ad unit, player geography, time of day, etc.), the advertisement server may then (through matching and optimization) distribute and deliver targeted advertisements to players’ gaming devices, where the advertisements may be integrated into the relevant game areas in real time.” (emphasis added)). Thus, we agree with Petitioner that the ad targeting described in Hays’s paragraph 22 happens before the matching and weighting system determines which ads to serve. Pet. Reply 3–4 (referring to Hays’s paragraph 22 and arguing that the “pre-selection plainly happens serve to a particular mobile device”). In other words, ads are pre-selected before they are ultimately selected by the matching and weighting system. Petitioner’s contentions and Hays’s disclosures are consistent with the ’056 patent’s written description, which states the following: The pre-selected content may be stored on a storage medium accessible by the server. Updated content may be chosen from pre-selected content based on at least one of the factors including a type of the mobile communication device, a telecommunication service, a subscription associated with the mobile communication device, and a service provider of the telecommunication service. Ex. 1001, 11:34–40. Thus, the ’056 patent discloses that content is selected from pre-selected content. Claim 9 similarly requires identifying “what preselected in-game video game content to send,” meaning that content is selected from pre-selected content. See Tr. 31:2–5 (Patent Owner’s counsel’s argument that “there must be a pre-selection of certain content that will be available from which to select once the request is received, and then the checking step is performed in the various claims here”), 31:21–23 (Patent Owner’s counsel’s argument that “[t]here must be some pre-selection of, you know, kind of narrowed down content, if you will, but then when the request comes in, you choose among that pre-selected content for the final selection”). On this record, we find that Petitioner’s contentions and Hays’s disclosure of selecting ads to serve from a pool of ads that are selected ahead of time are consistent with the written description of the ’056 patent and show how Hays teaches the pertinent claim limitations.” slip op. at 22
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“argues that Hays “is only a ‘printed publication’ under § 311(b) as of the date it became available to the public—i.e., after the June 26, 2007, priority date of the ’056 Patent,” and, therefore, that Hays is “ineligible to be prior art in an IPR.” PO Resp. 56–58. The Federal Circuit has rejected this argument, holding that a published patent application is, by its literal terms, a “printed publication.” So, when § 311(b) permits IPR challenges based upon “prior art . . . printed publications,” it includes within its literal scope challenges based upon a published patent application. And, by virtue of § 102(e)(1), a published patent application—this specific type of “printed publication”—is deemed prior art as of its filing date. Therefore, the plain language of §§ 311(b) and 102(e)(1) permits IPR challenges based upon published patent applications, and such published patent applications can be deemed prior art in IPRs as of their filing date. Lynk Labs, Inc. v. Samsung Elecs. Co., 125 F.4th 1120, 1127 (Fed. Cir. 2025). Thus, Petitioner asserts a permissible ground of unpatentability under 35 U.S.C. § 311(b) by arguing that claims 1–16 are unpatentable under 35 U.S.C. § 103(a) on the basis of Hays, which is a prior art printed publication.” slip op. at 17
Patent outcomesUS 11,117,056 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSRPatents in suitUS 11,117,056 - PLR Worldwide Sales Limited v. Flip Phone Games, Inc.All claims unpatentablePTAB · Apr 24, 2025 · IPR2024-00171 · APJ Daniel J Galligan · IPR · Final written decision
Claims 1–14 are unpatentable as obvious over Hays; the Board did not reach the remaining grounds.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“B. Level of Ordinary Skill in the Art Petitioner, relying on the testimony of Dr. Zagal, argues that a person having ordinary skill in the art “would have had an undergraduate degree in game design or development, computer science, computer engineering, or a related field, with at least two years of experience working with computer gaming systems or software application development.” Pet. 2 (citing Ex. 1003 ¶¶ 62–66). Petitioner also contends that “[l]ess work experience may be compensated by a higher level of education or vice versa.” Pet. 2–3 (citing Ex. 1003 ¶¶ 62–66). Patent Owner, relying on the testimony of Dr. Akl, contends that a skilled artisan “would have a bachelor’s degree in electrical engineering, computer engineering, computer science, or a similar field, along with one to two years of experience developing or programming video games or video game systems, or similar types of computer systems,” but notes that a skilled artisan “may have additional education that might substitute for some of the experience, and additional substantial experience might substitute for some of the educational background.” PO Resp. 2–3 (citing Ex. 2004 ¶ 28). According to Patent Owner, Petitioner’s proposal does not require Owner states, “[t]his difference does not materially affect the analysis presented below.” PO Resp. 3. We see very little difference between the parties’ respective proposals. We adopt Patent Owner’s more specific proposal because it is consistent with the level of skill evidenced in the ’958 patent and the applied prior art, but we agree with Patent Owner that this does not affect our analysis; we would reach the same conclusions under Petitioner’s proposal.” slip op. at 5
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“requirements for the language “for use in a video game,” including that the updated video-game content be an interactive object that is inserted into an existing game, or at least a new ad unit not already present in the game, and that the updated content alter the function of the game. PO Resp. 15–17. Patent Owner offers no persuasive support for these restrictions on the claim language. The claim language itself suggests no such restrictions. Rather, the claim language simply recites video-game content that is for use in the video game. The claim language does not specify who or what must use the content or how it must be used. Thus, the claim language itself is broad and includes none of the restrictions Patent Owner would place on it.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Owner’s position to be that mere storage of content is not enough to show pre-selection of that content. For example, during oral argument, Patent Owner’s counsel argued as follows: I don’t think it’s just as simple as saying, well, anytime you store anything, it’s been pre-selected, because again, that kind of reads out pre-selection, as well. And the same thing with indexing. I think that’s simply too broad. There must be some pre-selection of, you know, kind of narrowed down content, if you will, but then when the request comes in, you choose among that pre-selected content for the final selection. Tr. 31:18–23; see also PO Resp. 11 (“[E]xtending the claim to content that is merely selected from storage and sent gives no meaning to pre-selected . . . .”), 12 (“[C]ontent is not shown to be pre-selected by selecting it from storage and sending.”); Tr. 31:2–5 (Patent Owner’s counsel’s argument that “there must be a pre-selection of certain content that will be available from which to select once the request is received, and then the checking step is performed in the various claims here”), 34:23–24 (Patent Owner’s counsel’s argument that “[t]here still must be a pre-selection, which we don’t think is simply, you know, the act of storing”). As explained below in Sections II.D.2.b and II.D.6, Petitioner’s contentions based on Hays show that Hays teaches pre-selected ads, as recited in claims 1 and 8, and a pre-selected message, as recited in claims 5 and 12, according to Patent Owner’s understanding of the term. Therefore, we apply Patent Owner’s interpretation in our patentability analysis, and we need not provide a full claim interpretation, nor do we need to resolve whether pre-selecting can be met by merely storing data. See Realtime” slip op. at 14
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“unpatentable 1 or more claims of a patent only on a ground that could be raised under section 102 or 103 and only on the basis of prior art consisting of patents or printed publications.” 35 U.S.C. § 311(b). Patent Owner argues that “Hays is only a ‘printed publication’ under § 311(b) as of the date it became available to the public—i.e., after the June 26, 2007, priority date of the ’958 Patent,” and, therefore, that Hays is “ineligible to be prior art in an IPR.” PO Resp. 48–50. The Federal Circuit has rejected this argument, holding that a published patent application is, by its literal terms, a “printed publication.” So, when § 311(b) permits IPR challenges based upon “prior art . . . printed publications,” it includes within its literal scope challenges based upon a published patent application—this specific type of “printed publication”—is deemed prior art as of its filing date. Therefore, the plain language of §§ 311(b) and 102(e)(1) permits IPR challenges based upon published patent applications, and such published patent applications can be deemed prior art in IPRs as of their filing date. Lynk Labs, Inc. v. Samsung Elecs. Co., 125 F.4th 1120, 1127 (Fed. Cir. 2025). Thus, Petitioner asserts a permissible ground of unpatentability under 35 U.S.C. § 311(b) by arguing that claims 1–14 are unpatentable under 35 U.S.C. § 103(a) on the basis of Hays, which is a prior art printed publication.” slip op. at 15
Patent outcomesUS 10,617,958 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSRPatents in suitUS 10,617,958
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.