- PTAB · Jul 16, 2025 · PGR2025-00012 · APJ Debra L Dennett · PGR · Institution
Instituted PGR on claims 1–3 based on five grounds; the Board found each ground met the institution threshold on the preliminary record.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“We have authority to determine whether to institute a post-grant review under 35 U.S.C. § 324. Institution of a post-grant review is authorized by statute when “the information presented in the petition . . . would demonstrate that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” 35 U.S.C. § 324(a). A post-grant review may also be instituted when “the petition raises a novel or unsettled legal question that is important to other patents or patent applications.” See id. § 324(b). Applying that standard on behalf of the Director (37 C.F.R. § 42.4(a)) and in consideration of the Petition, Preliminary Response, and the evidence of record, we determine that the information presented shows that it is more likely than not that Petitioner would prevail in establishing unpatentability of claims 1–3 of the ’201 patent.” slip op. at 2
- Skill levelSkill level board ownOther
“At this stage of the proceedings, neither Petitioner’s nor Patent Owner’s proffered definitions of the level of skill appear appropriate. Petitioner’s proposal requires as little as a bachelor’s degree in organic chemistry and two years of experience as a laboratory technician working on development of molecules with targeted biological activity, and an ambiguous “understanding” of certain processes. Patent Owner’s proposal, other the other hand, requires multiple years of both formal training and actual, practical experience in highly specialized fields that involve detection of optical or radiolabeled compounds and use of molecular imaging techniques such as PET and SPECT. For the purposes of this decision, on the record at this time, we find that a POSA would have had a Ph.D. in chemistry, biochemistry, or a comparable field or an M.D., and at least four years of experience in chemical synthesis of compounds that may be used to target biologically-significant tissues. This definition appears consistent with the level of skill shown in the prior art references of record. See Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007). The parties will have the opportunity to cross-examine Dr. Martin and Dr. VanBrocklin in this proceeding to develop a full record for us to determine the weight that each expert’s testimony should be given. We invite the parties to further brief the definition of a POSA here, and whether we should discount either experts’ testimony due to lack of qualifications.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other
“c) Analysis On the present record, we find that “low molecular weight” is not limited to Patent Owner’s proposed “from about 50 Daltons to about 1,500 Daltons.” The cited evidence relied on in the Pomper Declaration all concerns metabolomics and metabolites, and we find no reason that even a vague definition of metabolites applies to the claimed compounds. See Ex. 1002, ¶ 102. Moreover, the uncontested fact that several of the B moieties alone—without the A moiety or L linker—specifically identified in the ’201 patent fall outside of Patent Owner’s proposed definition is persuasive (see id., ¶ 103), as we normally do not interpret claim terms in a way that excludes examples disclosed in the specification. See, e.g., Verizon Servs. Corp. v. Vonage Holdings Corp., 503 F.3d 1295, 1305 (Fed. Cir. 2007) (rejecting proposed claim interpretation that would exclude disclosed examples in the specification). In addition, the opinion stated in the Pomper Declaration that “the term of ‘low molecular weight’ is well accepted in the chemical arts’” and the declarant “recognize[s] that low molecular weight compounds would have a molecular weight of typically form about 50 Daltons to about 1,500 Daltons” is offered by a co-inventor. We, as factfinder, have discretion to weigh the credibility of expert witnesses and to give each item of evidence such weight as appropriate. See In re Am. Acad. of Sci. Tech Ctr., 367 F.3d 1359, 1368 (Fed. Cir. 2004) (“[T]he Board is entitled to weigh the declarations and conclude that the lack of factual corroboration warrants discounting the opinions expressed in the declarations.”). In this case, we find that the published references on metabolites do not support the opinion. In re Am. Acad. of Sci. Tech Ctr., 367 F.3d at 1368 (Fed. Cir. 2004) (“[T]he Board is entitled to weigh the declarations and conclude that the lack of factual corroboration warrants discounting the opinions expressed in the declarations.”) The Pomper reference (Ex. 1006) also uses the term “low molecular weight”—without further characterization of the term—and is uninformative as to the meaning of the term. See Ex. 2002, ¶ 60; Ex. 1006, ¶ 12. The table giving the molecular weight of a “selection of compounds disclosed by Pomper” (see Ex. 2002, ¶ 62) is not persuasive in defining “low molecular weight,” as it does not explain how those included were “selected” and does not include molecular weights for all of the examples.7 In addition, Patent Owner’s definition does not appear to apply to all claimed compounds.8 7 At least one of the examples (SRV73) not included in the table appears to have a molecular weight well over “about 1,500 Daltons.” 8 See, e.g., claim 113 of Ex. 1006. Patent Owner’s arguments distinguishing “low molecular weight” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed petitioner constructionDecided for petitioner
“The ’201 patent defines “alkyl” as “a straight (i.e., unbranched) or branched chain, acyclic or cyclic hydrocarbon group, or combination thereof” “ that has “the number of carbon atoms designated (i.e., C1–C10 means one to ten carbons, including 1, 2, 3, 4, 5, 6, 7, 8, 9, and 10 carbons)” and “[i]n particular embodiments, the term ‘alkyl’ refers to C1-20 inclusive, including 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, and 20 carbons” “unless otherwise stated.” Ex. 1001, 39:44–58. Although substituents at the R1x position in the claims are limited to “C1-6alkyl,” those at position R3x are not. Ex. 1001, Certif. Corr. Patent Owner’s representation that “Jansen I provides ‘the following definitions’ stating that ‘alkyls groups of this invention comprise from 1 to 6 carbon atoms’” is inaccurate. See Prelim. Resp. 19. In fact, Jansen I states: The term “alkyl” by itself or as part of another substituent refers to a fully saturated hydrocarbon of Formula CxH2x+1 wherein x is a number greater than or equal to 1. Generally, alkyl groups of this invention comprise from 1 to 6 carbon atoms. Alkyl groups may be linear or branched and may be substituted as indicated herein. When a subscript is used herein following a carbon atom, the subscript refers to the number of carbon atoms that the named group may contain. Ex. 1007, 22:16–23 (emphasis added). Neither the ’201 patent nor its incorporation by reference of Jansen I would have conveyed to a POSA that the “(CO)alkyl” of the substituent in the R3x position in the claims is intended to comprise from one to six carbon atoms or is limited to any particular length and size. “(C(O)alkyl,” having no number of carbon atoms designated, means” slip op. at 15
Claim construction§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham · NautilusPatents in suitUS 11,938,201 - Bio-Rad Laboratories, Inc. v. California Institute Of TechnologyRehearing deniedPTAB · May 22, 2025 · IPR2024-01178 · APJ Cynthia M Hardman · IPR · Rehearing
The Board denied Bio-Rad’s rehearing request, leaving institution denied because the petition relied on Saxonov material not shown to be prior art and could not be supplemented on rehearing.
RulingsRehearing decision- RehearingRehearing, deniedDenied
“Such an approach is inconsistent with the Supreme Court’s statements that in an inter partes review, “the petitioner is master of its complaint,” and “the petition [is] the centerpiece of the proceeding.” SAS Inst., Inc. v. Iancu, 584 U.S. 357, 363, 369 (2020). “It is of the utmost importance that petitioners in IPR proceedings adhere to the requirement that the initial petition identify ‘with particularity’ the ‘evidence that supports the grounds for the challenge to each claim.’” Intelligent Bio-Sys., Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1369 (Fed. Cir. 2016) (quoting 35 U.S.C. § 312(a)(3)). In contravention of these principles, Petitioner’s approach improperly shifts the onus to Patent Owner or the Board to identify and parse out erroneous, and purportedly non-essential, citations to Saxonov and piece together an argument based on the remaining citations. As we stated in the Decision, we decline to assume this task. See Dec. 20. Finally, in the Request, Petitioner attempts to “show[] how Ground 6 is fully supported by undisputed prior art material.” Req. 6. This attempt is improper. Petitioner cannot use the Request as a means to supplement the Petition to identify purportedly essential citations and disavow erroneous or non-essential citations.” slip op. at 6
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“In the Decision, we determined that Petitioner had not shown that all of the portions of Saxonov that Petitioner relied on in its unpatentability arguments qualify as prior art to the challenged claims. See Dec. 17–24. On this basis, we found that Petitioner failed to demonstrate a reasonable likelihood that it would prevail in showing the unpatentability of at least one challenged claim of the ’170 patent.” slip op. at 2
NonePatents in suitUS 10,770,170 - Inergy Technology, Inc. v. Force Mos Technology Co., Ltd.Some claims unpatentablePTAB · May 16, 2025 · IPR2024-00094 · APJ Mary C Hoffman · IPR · Final written decision
Claims 1 and 3–5 are unpatentable over Kobayashi and Hshieh; claims 2 and 6 were not shown unpatentable over the asserted combinations.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner asserts that a person of ordinary skill in the art (“POSITA”), “at the filing date of the ’409 [p]atent[,] would have a master’s degree in electrical engineering, and at least two years of relevant work experience in the field of integrated circuit design and manufacturing.” Pet. 13 (citing Ex. 1003 ¶ 52). Patent Owner does not dispute Petitioner’s proffered level of ordinary skill in the art. PO Resp. 9 (citing Ex. 2021 ¶ 55). We adopt Petitioner’s proffered level of ordinary skill in the art, which is supported by unopposed declaration testimony and consistent with the ’409 patent and prior art of record. See, e.g., Ex. 1001, 1:6–3:8 (describing the invention and related art in terms of integrated circuit design and fabrication). Neither party, moreover, indicates the overall result would change based on a different definition.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner
“Based on the arguments and evidence, we disagree with Petitioner’s proposed construction requiring the corners to be rounded via a particular process, because doing so would improperly import a process of manufacture from the Specification into apparatus claims. See Cont’l Circuits LLC v. Intel Corp., 915 F.3d 788, 799 (Fed. Cir. 2019) (explaining that, generally, a novel product that meets the criteria of patentability is not limited to the process by which it was made, however, process steps can be treated as part of a product claim if the patentee has made clear that the process steps are an essential part of the claimed invention). Here, the portions of the Specification relied on by Petitioner (Ex. 1001, 2:10–20, 4:53–64) disclose a process for manufacturing but do not make clear that the process is an essential part of the claimed invention. We also disagree with Petitioner’s assessment of the prosecution history, i.e., that the claims were amended to distinguish the claimed rounded corners from Pfirsch’s rounded corners, which, presumably, are formed as an incidental result of lithography. On the contrary, the Examiner found (and Patent Owner acknowledged) that Pfirsch has rounded corners. Ex. 1002, 276, 295, 302. As Patent Owner correctly points out, the claims were amended during prosecution to include a “circular” contact to distinguish over Pfirsch’s square contact. See id. Petitioner does not otherwise point to evidence that Patent Owner clearly and unmistakably limited the claim scope to rounded corners formed by a particular process.” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“is ‘known’ is not sufficient for a motivation to combine.” PO Resp. 47. However, the motivation-to-combine analysis is a flexible one, and the “known-technique” rationale is adequate to show a motivation to combine. For example, “if a technique has been used to improve one device, and a person of ordinary skill in the art would recognize that it would improve similar devices in the same way, using the technique is obvious unless its actual application is beyond his or her skill.” KSR, 550 U.S. at 417; see also Intel Corp. v. PACT XPP Schweiz AG, 61 F.4th 1373, 1380 (Fed. Cir. 2023) (quoting Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 799–800 (Fed. Cir. 2021) (“If there’s a known technique to address a known problem using ‘prior art elements according to their established functions,’ then there is a motivation to combine.”). Here, as discussed above, the record shows that top view rounding was a known technique to eliminate corners, and that corners were a known problem (e.g., corners tend to reach undesirable higher peak electric field leading to premature breakdown voltage). See, e.g., Ex. 1003 ¶¶ 37, 39, 42– 44, 55–57, 122, 133, 135–141; Ex. 1005, 7:57–8:4; Ex. 1006, 1:18–21, 2:19–39, 5:3–17, Figs. 6A–8B; Ex. 1011, 1:29–41; Ex. 1012; PO Resp. 13, 46 (citing Ex. 1011, 1:34–40); Ex. 2021 ¶ 87. Furthermore, there is no dispute that modifying Kobayashi to eliminate corners via top view rounding was anything more than a “minor and commonplace modification” of cell shape within the skill of an ordinary artisan, or that top view rounding would change Kobayashi’s established function. Pet. 60; Ex. 2021 ¶ 86.” slip op. at 30
- Obviousness (§103) › KSR rationalesMotivation foundUnpatentable
“We agree that Kobayashi’ s Figure 5A solely cannot be relied upon as disclosing the claimed diameter. See Hockerson-Halbertstadt, Inc. v. Avia Group Int'l, 222 F.3d 951, 956 (Fed. Cir. 2000) (patent drawings not designated as being drawn to scale cannot be relied upon to define precise proportions of elements if the specification is completely silent on the issue). However, we do not agree that Petitioner failed to show Kobayashi suggests the recited diameter. We disagree with Patent Owner’s assertion that Dr. Liu’s “vague, purported ‘design considerations’” are “unsupported.” PO Resp. 43. Although Kobayashi is silent on the width/diameter of the trench contact in Figure 5A, Kobayashi discloses trenched gates having dimensions below 0.5 μm, which demonstrates that it was known in the art, and required no more than an exercise of ordinary skill in the art, to create trenched features of widths well below 1 μm. Kobayashi also discloses that the width of each trench, and the distance between the adjacent trenches (which includes the trench contact), must be selected to optimum sizes . . . [and] these sizes . . . have some degrees of freedom.” Ex. 1005, 7:42–48. This demonstrates a POSITA would seek to optimize trench contact width or diameter. Dr. Liu’s testimony regarding design considerations suggests the desirability of a reduced diameter trench contact, e.g., to minimize the width of the trench contact for purposes of easier filling, to minimize the total width of the unit cell, and to minimize manufacturing time by reducing etch back time. See Ex. 1003 ¶¶ 111–114. As Patent Owner acknowledges, “there is always a motivation to speed up the fabrication process or shrink feature sizes of semiconductors.” PO Resp. 43 (citing 2021 ¶ 131). However, contrary to Patent Owner’s arguments, these are not generic motivations “untethered” from Kobayashi. Id. Indeed, Kobayashi directly addresses the fabrication process (including new techniques to obtain trench widths under 0.5 μm) and the need to optimize the size of trench gates and the space in between (which includes the trench contact). Ex. 1005, 7:43–54, 7:19–9:53. Patent Owner also argues that Petitioner presents no evidence that modifying Kobayashi to have a diameter smaller than 1 μm is predictable. PO Resp. 44. We disagree. As discussed above, Petitioner points to Kobayashi’s teachings that the sizes are to be optimized and that the trench gate width is smaller than 0.5 μm, which suggests making other trench features of that width was within ordinary skill. Ex. 1003 ¶ 112. Furthermore, Kobayashi’s silence as to the dimensions of the trench contact suggests that the trench contact diameter dimension is likely in the ballpark of the other explicitly disclosed trenched feature dimensions and is a matter of routine optimization. In addition, Patent Owner advances no persuasive evidence that the claimed diameter produces unexpected results or is otherwise critical. Patent Owner also argues that reducing trench contact diameter has downsides (i.e., reduced ease of filling for metal plugs and reduced current carrying capacity) not addressed by Petitioner; however, Petitioner is not required to address those tradeoffs in its Petition, and we do not see how those tradeoffs would prevent the proposed combination. PO Resp. 44; see Medichem, S.A. v. Rolabo, S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006) (“a given course of action often has simultaneous advantages and disadvantages, and this does not necessarily obviate motivation to combine.”); Winner Int'l Royalty Corp. v. Wang, 202 F.3d 1340, 1349 n.8 (Fed. Cir. 2000) (“The fact that the motivating benefit comes at the expense of another benefit, however, should not nullify its use as a basis to modify the disclosure of one reference with the teachings of another. Instead, the benefits, both lost and gained, should be weighed against one another.”). Here, Dr. Liu listed numerous benefits of having a reduced diameter, which weigh against the potential downsides raised by Patent Owner. Ex. 1003 ¶¶ 111–114. Moreover, we do not see how the downsides/tradeoffs prevent modifying Kobayashi in the manner suggested when the same tradeoffs appear to be applicable to the ’409 patent. Having considered Patent Owner’s arguments, and taking into” slip op. at 43
Patent outcomesUS 7,812,409 mixedClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,812,409 - Inergy Technology, Inc. v. Force Mos Technology Co., Ltd.No claims unpatentablePTAB · May 16, 2025 · IPR2024-00093 · APJ Grace Karaffa Obermann · IPR · Final written decision
Claims 1–9 were not proven unpatentable because the asserted references did not establish the claimed epitaxial layer or the required coverage of the trench sidewalls.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner defines a person of ordinary skill in the art as having “a Master’s degree in electrical engineering, and at least two years of relevant work experience in the field of integrated circuit design and manufacturing.” Pet. 13 (citing Ex. 1003 ¶¶ 32–37, 57). Patent Owner does not dispute Petitioner’s definition. PO Resp. 6. We adopt Petitioner’s proposed definition of the level of ordinary skill in the art because it is supported by unopposed declaration testimony and appears to be consistent with the disclosures of the ’634 patent and the asserted prior art references. See Ex. 1001, 1:6–2:33 (describing the invention and related art in terms of integrated circuit design and fabrication); see also Ex. 1006 ¶¶ 1–6 (Hirler); Ex. 1008 ¶¶ 1–37 (Kobayashi); Ex. 1009 ¶¶ 2–29 (Shiraishi). Neither party, moreover, indicates the overall result would change based on a different definition.” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“Petitioner argues that “the sidewalls of said trenches in said base layer are covered” should be construed to mean that “the entire sidewalls of” those trenches are covered. Pet. 18–19. We refer to this as “the sidewall limitation.” Petitioner shows persuasively that the disclosure and file history of the ’634 patent support its position on the sidewall limitation. Id. Patent Owner, for its part, observes that, after the filing of the Petition. two District Courts adopted the construction proposed by Petitioner.” PO Resp. 21 (citing Ex. 2010, 6–9; Ex. 2011, 23). Patent Owner also agrees to apply Petitioner’s construction for purposes of this proceeding. Id. We agree with Patent Owner that an express construction of the sidewall limitation is necessary to this Decision, id., and adopt Petitioner’s undisputed definition because it is supported by the record. No other claim term requires express construction for purposes of this Decision.” slip op. at 8
- BurdenNot shown unpatentable
“On this record, Petitioner fails to demonstrate that any claim is unpatentable under any ground asserted in the Petition. IV. CONCLUSION For the above reasons, we determine that Petitioner fails to establish by a preponderance of the evidence that claims 1–9 of the ’634 patent are unpatentable.” slip op. at 34
- Expert testimonyPetitioner expert discountedPatent owner expert creditedDecided for patent owner
“Alternatively, even if we set aside that timing issue, Dr. Liu’s bare opinion, advanced for the first time during cross-examination, that an epitaxial layer is “obvious” from Hirler’s disclosure is inadequate to support the challenges. Id. at 24–25. We accord little weight to Dr. Liu’s opinion because it is conclusory. See Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential). In any event, Petitioner does not meet, on this record, the “high standard” required to establish an inherent disclosure of an epitaxial layer in Hirler. PO Resp. 24.6 Dr. Liu opined for the first time during cross-examination “that it would have been impossible to create Hirler’s more lightly doped n- drift zone layer on top of its more heavily doped n+ substrate layer other than via epitaxy.” Id. at 25 (citing Ex. 2014, 164:16– 165:20). But Patent Owner effectively refutes that proposition with evidence that such a layer “could be created by counter-doping,” even if, as Dr. Liu contends, counter-doping may have been less ideal due to “disadvantageous mobility.” Id. (citing Ex. 2012 ¶ 133; Ex. 2014, 166:15–167:8).” slip op. at 11
Patent outcomesUS 7,629,634 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,629,634 - Cipla Limited v. Gilead Sciences, Inc.Institution deniedPTAB · May 15, 2025 · IPR2025-00033 · APJ Susan L C Mitchell · IPR · Institution
The Board denied institution of IPR on claims 1–13 under § 314(a), finding the Fintiv factors favored denial and the petition did not present compelling merits.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Institution denied fintivDenied
“We determine that this factor weighs heavily in favor of exercising discretion to deny the Petition. The trial date in the district court litigation is scheduled for October 6, 2025. See Prelim. Resp. 16 (citing Ex. 2010). This date is at least six months before our projected statutory deadline should we go forward in this case. Patent Owner points out that this trial date is nine months later than the median time to trial in the District of Delaware, and in Patent Owner’s view, the parties are on track to satisfy the current schedule. Id. at 16–17 (citing Ex. 2011).” slip op. at 9
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsNot reached
“1 Patent Owner also asserts that the Petition should be denied under 35 U.S.C. § 325(d), but we need not reach this issue because we are exercising discretion under Section 314(a) to deny the Petition. See Prelim. Resp. 2–3.” slip op. at 2
Discretionary denialPatents in suitUS 11,744,802 - PTAB · May 6, 2025 · IPR2025-00187 · APJ Debra L Dennett · IPR · Institution
The Board instituted review of claims 1–17 on all petition grounds and granted Mundra and Adani’s motion to join IPR2025-00006.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“We instituted review of claims 1–17 of the ’009 patent in IPR2025-00006 after a review of all arguments and evidence presented by the parties, including Patent Owner’s arguments in its preliminary response. For the reasons discussed in the Institution Decision in IPR2025-00006, we determine that Petitioner demonstrates a reasonable likelihood of showing at least one claim of the ’009 patent is unpatentable. Thus, we find that the Petition warrants institution of inter partes review on all claims and grounds set forth in the Petition.” slip op. at 10
- PTAB / AIA Trials › Joinder §315(c) / SAS all-or-nothingJoinder, grantedGranted
“Petitioner contends that no new grounds of unpatentability are raised in the Petition. Mot. for Joinder 3–4. Petitioner further agrees to an “understudy” role in which it will not seek additional depositions or deposition time, and “will assume the primary role only if Runergy ceases to participate in the Runergy IPR.” Id. at 1, 5–6. And, argues that “[b]ecause . . . [the] Petition presents the identical grounds for the challenged claims and the same evidence, there are no new issues 8 Available at https://www.uspto.gov/TrialPracticeGuideConsolidated. for Patent Owner to address” and “joinder with the Runergy IPR will not unduly burden or negatively impact the schedule in that proceeding in any way.” Id. at 5; see also id. at 6 (“briefing and discovery will be simplified because Patent Owner can maintain its current trial schedule and avoid duplicative efforts”.” slip op. at 11
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art would have been someone with an advanced degree involving the disciplines of electrical engineering, applied physics, chemistry, or materials science, and at least two years of experience designing, developing, or researching in the field. Alternatively, that person would have had a bachelor’s degree in electrical engineering, applied physics, or materials science, and at least three years of experience designing, developing, or researching in the field. Pet. 4–5 (citing Ex. 1003 ¶ 49). Patent Owner does not address the level of ordinary skill in the art at this stage of the proceeding. See generally Prelim. Resp. In light of the record before us, and for purposes of this Decision, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’009 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand the ’009 patent and the prior art. We will make any final determination pertaining to the level of ordinary skill in the art, however, on the full trial record.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner contends that “[n]o claim construction is believed to be necessary to resolve this Petition.” Pet. 25. And, Patent Owner does not address claim construction at this stage of the proceeding. See generally Prelim. Resp. For purposes of this Decision, we need not expressly construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 10
Claim constructioncites Phillips · KSR · GrahamPatents in suitUS 10,230,009 - PTAB · May 6, 2025 · IPR2025-00186 · APJ Avelyn M Ross · IPR · Institution
The Board instituted IPR on claims 1–11 on all petition grounds and granted Mundra and Adani’s motion to join IPR2025-00007.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“after a review of all arguments and evidence presented by the parties, including Patent Owner’s arguments in its preliminary response. For the reasons discussed in the Institution Decision in IPR2025-00007, we determine that Petitioner demonstrates a reasonable likelihood of showing at least one claim of the ’104 patent is unpatentable. Thus, we find that the Petition warrants institution of inter partes review on all claims and grounds set forth in the Petition.” slip op. at 11
- PTAB / AIA Trials › Joinder §315(c) / SAS all-or-nothingJoinder, grantedGranted
“In considering a motion for joinder, and whether such joinder is appropriate, the Board may consider “whether a new ground of unpatentability is raised in the second petition, how the cost and schedule of the first proceeding will be impacted if joinder is granted, and whether granting joinder will add to the complexity of briefing and/or discovery.” Patent Trial and Appeal Board Consolidated Trial Practice Guide November 20198 at 76 (citing Kyocera Corp. v. SoftView LLC, IPR2013-00004, Paper 15 at 4 (PTAB Apr. 24, 2013)).” slip op. at 11
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art would have been someone with an advanced degree involving the disciplines of electrical engineering, applied physics, chemistry, or materials science, and at least two years of experience designing, developing, or researching in the field. Alternatively, that person would have had a bachelor’s degree in electrical engineering, applied physics, or materials science, and at least three years of experience designing, developing, or researching in the field.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“For purposes of this Decision, we need not expressly construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 10
Claim constructioncites Phillips · KSR · GrahamPatents in suitUS 9,722,104 - Cargill, Incorporated v. Bunge Loders Croklaan USA, LLCRehearing deniedPTAB · Apr 29, 2025 · IPR2024-01360 · APJ Debra L Dennett · IPR · Rehearing
The Board denied Cargill’s rehearing request, leaving institution denied for claims 1, 6–9, and 11–24 because the petition did not show a reason to combine the selected prior-art data without hindsight.
RulingsRehearing decision- RehearingRehearing, deniedDenied
“Upon request for rehearing, we assess a decision on institution “for an abuse of discretion” (37 C.F.R. § 42.71(c) (2020)), which occurs when a “decision was based on an erroneous conclusion of law,” “clearly erroneous factual findings,” or “a clear error of judgment.” PPG Indus. Inc. v. Celanese Polymer Specialties Co., 840 F.2d 1565, 1567 (Fed. Cir. 1988) (citations omitted). The burden of showing a decision should be modified lies with the party challenging the decision. 37 C.F.R. § 42.71(c) (2020). The request must specifically identify all matters the party believes the Board misapprehended or overlooked, and the place where each matter was previously addressed in a motion, an opposition, or a reply. Id. Thus, a request for rehearing is not an opportunity merely to disagree with the Board’s assessment of the arguments or weighing of the evidence, or to present new arguments or evidence. We have reviewed Petitioner’s Rehearing Request and carefully considered all the arguments presented. For the following reasons, we are not persuaded that we misapprehended or overlooked any arguments or evidence.” slip op. at 2
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“As discussed in the Decision, “obviousness concerns whether a skilled artisan not only could have made but would have been motivated to make the combinations or modifications of prior art to arrive at the claimed invention.” Belden Inc. v. Berk-Tek LLC, 805 F.3d 1064, 1073 (Fed. Cir. 2015) (citing InTouch Technologies, Inc. v. VGO Communications, Inc., 751 F.3d 1327, 1352 (Fed. Cir. 2014)). No matter the result of combining the allegedly “readily available and well-known” information taken from particular examples from the “documentary evidence” with Petrauskaite’s disclosure, a POSITA had to have been motivated to do so at the time the invention was made.1 What is missing from the Petition is the “why.” The only motivating force in this case appears to be hindsight spurring Petitioner on to choose particular examples of palm stearin disclosed in Deffense and the soybean oil in Neff in order to justify its assertion that Petrauskaite discloses the claimed wt% ranges of triglyceride classes.” slip op. at 4
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation not foundNot shown unpatentableNot shown unpatentable
“artisan not only could have made but would have been motivated to make the combinations or modifications of prior art to arrive at the claimed invention.” Belden Inc. v. Berk-Tek LLC, 805 F.3d 1064, 1073 (Fed. Cir. 2015) (citing InTouch Technologies, Inc. v. VGO Communications, Inc., 751 F.3d 1327, 1352 (Fed. Cir. 2014)). No matter the result of combining the allegedly “readily available and well-known” information taken from particular examples from the “documentary evidence” with Petrauskaite’s disclosure, a POSITA had to have been motivated to do so at the time the invention was made.1 What is missing from the Petition is the “why.” The only motivating force in this case appears to be hindsight spurring Petitioner on to choose particular examples of palm stearin disclosed in Deffense and the soybean oil in Neff in order to justify its assertion that Petrauskaite discloses the claimed wt% ranges of triglyceride classes.” slip op. at 4
- Strike new argumentNew argument disregardedDecided for patent owner
“Petitioner’s. We find no instance in the Petition in which “motivation” and “iodine value” are discussed together or linked in any way. The same can be said of Dr. Marangoni’s declaration. And, as noted in the Decision, it was not until the Preliminary Reply that Petitioner argued that specific data on fatty acid wt% used for the conversion calculations were selected to represent “knowledge generally available to one of ordinary skill in the art” due to similarity of the iodine value (“IV”) of the palm stearin (and soybean oil) disclosed in Petrauskaite. See Prelim. Reply 2–3. New evidence or argument in the Preliminary Reply that could have presented earlier is not permitted. On this record, we find Petitioner relies its Rehearing Request on arguments about a motivation to combine, stemming from the significance of iodine values, that were not raised in the Petition. Accordingly, Petitioner fails to support that the Decision misapprehended or overlooked arguments in the Petition about the significance of iodine values.” slip op. at 8
§ 103 obviousnesscites KSR · GrahamPatents in suitUS 7,645,473 - PTAB · Apr 25, 2025 · IPR2024-01463 · APJ David Cotta · IPR · Institution
The Board instituted inter partes review of claims 1–10 on all asserted grounds, finding a reasonable likelihood of success on at least one claim.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner
“predict how the district court in the related district court litigation will proceed because the court may determine whether or not to stay any individual case . . . based on a variety of circumstances and facts beyond our control and to which the Board is not privy.” Sand Revolution II LLC v. Cont’l Intermodal Grp., IPR2019-01393, Paper 24, 7 (PTAB June 16, 2020) (informative). We decline to speculate on how the court may rule on the pending motion to stay. Accordingly, this factor is neutral.” slip op. at 13
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Under 35 U.S.C. § 314(a), inter partes review may not be instituted unless the Petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Petitioner has established a reasonable likelihood of prevailing on its assertion that at least one of the challenged claims is unpatentable based on the grounds advanced here. We decline to deny the Petition on a discretionary basis as requested by Patent Owner. Thus, for reasons explained below, we institute inter partes review of claims 1–10 of the ’706 patent.” slip op. at 2
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“TC(220), and ΔRz/Ra are result effective variables and that copper foils having ΔPD, TC(220), and ΔRz/Ra values that meet the values recited in claim 1 have advantageous properties. See, e.g., Ex. 1005 ¶ 45 (Kim ’761, disclosing that preferably the “difference in peak count roughness Rpc between the shiny surface . . . and the matte surface . . . of the electrolytic copper foil . . . is preferably 60 or less” because “when the difference in the peak count roughness Rpc exceeds 60 capacity maintenance of the secondary battery is deteriorated.”);15 Ex. 1007, 3:16–23, 4:14–23 (Cheng, disclosing that the foils of Cheng’s invention have (220) and (311) surfaces that provide increased elongation and that solve a high roughness problem that rendered traditional products unsuitable for use in a lithium ion secondary battery), 10:27–34 (Cheng, disclosing that in the foils of Cheng’s invention “the roughness difference between both sides was extremely small” and thus “it was . . . not easy for the electrolytic copper foil to break or fracture during the charging-discharging cycles and the life of a battery is thus increased”), Tables 3 & 4 (Cheng, disclosing embodiments and comparative examples with TC(220) values meeting the requirements of claim 1); Ex. 1008, 6:36–44 (Wolski, disclosing that “the surface roughness Rz at the matte side of the untreated copper foil of the present invention is the same or smaller than the surface roughness Rz at the shiny side . . . so that the surface treated copper foil . . . becomes more low-profiled . . . whereby it becomes a foil having a large etching factor”), 9:1–29 & Table 2 (Wolski, disclosing 15 Dr. Randall testifies that “Kim ’761’s peak count roughness Rpc corresponds to the peak density PD of the ’706 patent.” Ex. 1003 ¶ 52. At this stage in the proceeding, this testimony is unrebutted. 38 embodiments meeting the ΔRz/Ra of claim 1, describing them as having “matte side roughnesses” that are “sufficiently small,” and as having “excellent” “high temperature elongation characteristics”), 11:37–41 (Wolski, describing comparative examples as having “large” matte side roughnesses “whereby etching factors are not good”), 12:12–27 (Wolski, teaching that “as compared with a conventional untreated copper foil, both surfaces of the untreated copper foil obtained by [Wolski’s] invention are flat” resulting in a low profile foil that has “excellent elongations at room temperature and high temperature and also high tensile strength”). The teachings in the prior art support the presently unrebutted testimony of Dr. Randall explaining why the POSA would have been motivated to modify Kim ’761’s copper foil to have the claimed TC(220) and ΔRz/Ra. Ex. 1003 ¶¶ 66–68, 71–74; Pfizer Inc., v. Sanofi Pasteur Inc., 94 F.4th 1341, 1348 (Fed. Cir. 2024) (“Where [a gap in prior art] includes a parameter not necessarily disclosed in the prior art, it is not improper to consider whether or not it would have been recognized as result-effective. If so, then the optimization of that parameter is ‘normally obvious.’”). Accordingly, we are not persuaded by Patent Owner’s argument that Petitioner failed to articulate a sufficient motivation to combine the references. To the contrary, the preliminary record presents a strong showing that the POSA would have been motivated to combine the references in the manner described in the Petition.” slip op. at 38
- Skill levelSkill level petitioner adoptedDecided for petitioner
“At this stage of the proceeding, Patent Owner does not contest Petitioner’s definition of the level of skill in the art. Prelim. Resp. 4 (“For purposes of this Preliminary Response, Patent Owner applies Petitioner’s level of skill for a person of ordinary skill in the art”). Petitioner’s definition appears to be consistent with the field of the invention reflected in the prior art of record and the disclosure of the ’706 patent. Accordingly, for purposes of this Decision, we adopt Petitioner’s proposed definition of the person of ordinary skill in the art.” slip op. at 21
Claim construction§ 103 obviousnessDiscretionary denialcites KSR · GrahamPatents in suitUS 11,591,706 - Solus Advanced Materials Co., Ltd. v. SK Nexilis Co., Ltd.Institution deniedPTAB · Apr 25, 2025 · IPR2024-01462 · APJ Jo-Anne M Kokoski · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–8 were unpatentable under the asserted obviousness grounds.
RulingsInstitution decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“experience working on the development of materials or components for electronic devices such as batteries.” Pet. 2. Petitioner further contends that “[a]dditional education, such as a graduate degree, could compensate for less work experience, and additional work experience could compensate for less formal education.” Id. Patent Owner states that, “[f]or purposes of this Preliminary Response, Patent Owner applies Petitioner’s level of skill for a person of ordinary skill in the art.” Prelim. Resp. 4. For purposes of this Decision, we adopt Petitioner’s undisputed proposed definition because it appears to be consistent with the cited prior art and the disclosure of the ’014 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their plain and ordinary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. Realtime Data LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). in this proceeding.” Pet. 3. Patent Owner contends that “[t]he Board need not construe any term in order to determine that institution should be denied.” Prelim. Resp. 4. Based on the record before us, we determine that no claim term requires express construction for purposes of this Decision. See Realtime Data, 912 F.3d at 1375.” slip op. at 8
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“For these reasons, we are not persuaded that Petitioner sufficiently establishes that a POSITA would have been motivated to modify Hanafusa in light of Dobashi with a reasonable expectation of success as Petitioner contends. Accordingly, we determine that Petitioner fails to demonstrate a reasonable likelihood of prevailing in its assertion that the subject matter of claim 1, and claims 4 and 8 that depend therefrom, would have been obvious over the combined teachings of Hanafusa and Dobashi.” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“Petitioner also focuses on Hanafusa’s teaching that all known methods can be used to make a rough surface low-profile, and Dobashi’s teaching that RSm can be used as an indicator for judgment of the surface, to support its contention that a POSITA would have been motivated to apply Dobashi’s RSm to further achieve Hanafusa’s purpose, without explaining how and why that would be the case. In particular, neither Petitioner nor Dr. Josefowicz adequately explain why a POSITA looking for ways to make Hanafusa’s surface roughness low-profile would look to methods to achieve as the period of waviness, RSm can also be used as an indicator for judgment of the surface.” Ex. 1005, 2:66–3:1, 6:23–26. Dobashi explains that waviness is “an indicator for determining whether the fine pattern forming performance is good or bad,” and “[t]he surface has small waviness and is smooth when RSm is large, and the surface has large waviness and is rough when RSm is small.” Id. at 3:1–3, 6:27–29. Dobashi also teaches that surface roughness Rzjis is used as a low-profile indicator. Ex. 1005, 2:66– 3:1. Dobashi, therefore, teaches that RSm is an indicator of surface waviness, which Dobashi explains is different than surface roughness. Id. at 2:66–3:3, 6:23–29. Given these teachings in Dobashi, neither Petitioner nor Dr. Josefowicz sufficiently explains how or why a POSITA would have been motivated to implement Dobashi’s RSm values to make Hanafusa’s surface roughness low-profile. See Pet. 10–12; Ex. 1003 ¶¶ 46–52.” slip op. at 14
Claim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 11,346,014
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.