• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.Some claims unpatentable
  PTAB · Nov 26, 2025 · IPR2024-00984 · APJ Nabeel U Khan · IPR · Final written decision

  Claims 6 and 7 are unpatentable as obvious over Meulen and Chao; claim 1 was not shown unpatentable because Meulen does not disclose transforming an image captured by its camera.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner argues that a person of ordinary skill in the art in the relevant field “would have a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing, or digital cameras,” or alternatively “would have four years of experience working on image or video processing, or digital cameras.” Pet. 6. Petitioner further argues that an “advanced graduate degree” may “make up for the work experience.” Id. (citing Ex. 1002 ¶¶ 33–34). “Patent Owner applies Petitioner’s proposed level of skill.” PO Resp. 4–5 (citing Ex. 2027 ¶¶ 19–20). We adopt Petitioner’s proposed level of ordinary skill because it is consistent with the level of skill in the art at the time of the invention as reflected by the ’413 patent and the cited prior art.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “From the outset we note that the words of the claim recite “non- uniformly shift[ing] the pixels” and do not recite a “non-linear” transformation. This favors Petitioner’s position, which is based directly off the definition of “non-uniform,” over Patent Owner’s position, which substitutes “non-linear” for “non-uniform.” Generally, then, we would determine the ordinary and customary meaning of the claim term in the context of the entire Specification. Here, however, the ʼ413 patent does not mention “uniform” or “non-uniform” shifting of pixels anywhere except in the claims. The Specification, therefore, provides limited guidance, by itself, as to the ordinary and customary meaning of the term. Nonetheless, even reviewing the portions of the Specification cited by the parties, we see no clear or unambiguous effort to limit the challenged claims to require only non-linear transformations in which the pixels to which a transformation is applied do not have the same amount of shift. is not non-linear. Pet. Reply 1. Specifically, Petitioner argues that the center circle of Figure 2B maintains the original circular shape after the transformation is applied to the image which contradicts Patent Owner’s argument that no two pixels will have the same amount of shift. Pet. Reply 1–2. We agree. In Figure 2B of the ʼ413 patent, the center of the image is chosen to be the region of interest. Ex. 1001, 4:19–21. After the input image goes through linear scaling (step 204) and then non-linear warping (step 206) the circles become more vertically compressed as they approach the top and bottom edges and more horizontally stretched as they approach the left and right edges. Id. at 4:22–30. But “the center circle is fully corrected so that it maintains the original circular shape of the corresponding circle in the input image 212.” Id. at 4:23–25. This means that at least some pixels, such as those of the center circle, undergo the same amount of shift after being transformed.” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “readable instructions” of claims 1 and 2 must occur in a particular order. Specifically, Patent Owner argues that the step of “determine a portion within the input image” must occur after “obtain[ing] an image” and before “apply[ing] a transformation to the input image.” PO Resp. 17 (citing Ex. 2027 ¶ 59). Petitioner argues, on the other hand, that the specification does not require such an order and, in fact, describes an embodiment where such an order is not followed. Pet. 3. We determine that the “determine a portion within the input image” step does not need to occur after the “obtain an image” step and before the “apply a transformation to the input image” step. As Patent Owner itself points out, claims 1 and 2 are apparatus and system claims respectively, and an ordering of the limitations of such claims is not necessary. PO Resp. 17. Even if we were to treat the apparatus and system claims as reciting the steps of a method, “as a general rule the claim is not limited to performance of the steps in the order recited, unless the claim explicitly or implicitly requires a specific order.” Baldwin Graphic Systems, Inc. v. Siebert, Inc., 512 F.3d 1338, 1345 (Fed. Cir. 2008) (citing Interactive Gift Express, Inc. v. Compuserve Inc., 256 F.3d 1323, 1342–43 (Fed. Cir. 2001)). We see nothing in the claims that would cause us to break this general rule. Patent Owner argues that the claims imply a “specific order because the ‘determine a portion’ requirement operates on ‘the [obtained] input image’ and defines the ‘portion’ that is necessary for the 23; Ex. 2027 ¶ 59). Although the steps are recited in a specific order in the claim, as they necessarily must be, the claim does not expressly specify that the certain steps must occur before or after other instructions, nor does logic imply such a requirement. For example, if certain characteristics of the image are known before the image is obtained (e.g. the size, dimensions, resolution, aspect ratio, or content etc.) the determination of the portion of the image could be made before the image is obtained. These characteristics may be based on the specific device taking the image or the subject matter of the image, both of which may be known before the image is captured or obtained. It is, therefore, not necessary that the image be obtained in order for a portion of the image to be determined. Similarly, we do not find the written description to expressly or implicitly specify an order the claimed step of “determine a portion of the input image.” For example, the written description of the ʼ413 patent states that in Figure 2B “the center of the image is chosen to be the region of interest that is most fully corrected and the distortion increases in each direction as the frame boundary is approached.” Ex. 1001, 4:19–22. Patent Owner emphasizes that this disclosure implies that an input image is obtained before the center portion is chosen. PO Resp. 19 (citing Ex. 1001, 3:63–64, 4:19–22). But the description of this embodiment does not expressly recite an order. For example, the description of Figure 2A explains that “an input image is obtained” in step 202, “the image is then scaled” in step 204, and a “non-linear warping is then applied” in step 206. Ex. 1001, 3:63–4:3. This description does not mention “determin[ing] of a portion of the image” as a separate step or as part of the listed steps, and therefore, does not specify an order in which this step must occur. is configured so that some areas of the image are fully corrected geometrically, while some other areas are distorted. . . . [T]he center of the image is chosen to be the region of interest that is most fully corrected and the distortion increases in each direction.” Id. at 4:17–19. This excerpt from the ʼ413 patent, which the Patent Owner specifically relies on (PO Resp. 19), also does not specify an order in which the determination step (choosing of the region of interest) takes place. Moreover, because the ʼ413 patent states that the warp module is configured so that some areas are fully corrected while others are not, the determination step could take place at the time the warp module was configured, presumably before the image was obtained. Finally, the ʼ413 patent states that “in the case, of video, the area may dynamically change between images (e.g. to follow a moving object).” Ex. 1001, 4:34–36. Patent Owner argues that this description “requires first obtaining the image in order to locate the object that is being followed.” PO Resp. 19–20. This embodiment is related to the case of video or a moving object, which the challenged claims do not mention. We, therefore, decline to limit the scope of the claim based on this embodiment. Phillips v. AWH Corp., 415 F.3d 1303, 1323 (Fed. Cir. 2005) (en banc) (“[A]lthough the specification often describes very specific embodiments of the invention, we have repeatedly warned against confining the claims to those embodiments.”).” slip op. at 14

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “Having reviewed the parties’ arguments and cited evidence we determine Petitioner has established, by a preponderance of the evidence, that a POSITA would have been motivated to combine Meulen and Chao. For example, Petitioner argues that “[i]t would have been obvious that when performing image scaling, pixels from the input to output positions are shifted based on a scaling factor.” Pet. 91. Meulen teaches scaling but does not provide the details regarding scaling. E.g., Ex. 1007, 1:55–56, 4:37–49. We agree that in light of Meulen’s disclosure of scaling, a POSITA would have looked to other references, such as Chao, for further details on how to perform scaling. Dr. Katsaggelos provides credible support, testifying that “Meulen mentions ‘compression and/or scaling,’ and provides details on how to perform compression. But Meulen does not disclose the details of how to perform scaling. A POSITA when faced with Meulen and having the knowledge about scaling would have been motivated to turn to a prior art reference that discloses the details of scaling.” Ex. 1002 ¶ 262. Patent Owner argues that Petitioner provides no motivation to combine other than asserting that it involves combining prior art elements. PO Resp. 35 (quoting Pet. 92). As explained above, however, Petitioner does more than just assert that the motivation involves combining prior art elements. Instead, Petitioner explains that Meulen discusses both compression and scaling, and provides details regarding compression but does not provide details on how to scale. Pet. 91–92; Ex. 1002 ¶¶ 262–262. Thus, Meulen teaches that scaling was a known technique. See Hybritech, (“a patent need not teach, and preferably omits, what is well known in the art”). Dr. Katsaggelos testifies that, in this situation, a POSITA would have looked to Chao for details regarding scaling. Ex. 1002 ¶¶ 262–263. We determine this establishes, by a preponderance of the evidence, that a POSITA would have had reason to combine Meulen’s teachings with Chao. Patent Owner draws a distinction between Meulen and Chao, arguing that “Meulen is concerned with modifying content from a media source to be displayed on a device’s screen while Chao, by contrast, is directed to changing the aspect ratio of a document intended for printing.” Id. at 36 (citing Ex. 2027 ¶¶ 89–90). Patent Owner’s argument is contradicted, however, by Chao’s disclosure which states that “after all the background and foreground elements in the image have been resized . . . [t]he image may be output by displaying the image on or as part of: a display screen such as a computer monitor, camera screen, printer screen, printed page, projected image, or the like.” Ex. 1008 ¶ 32. Patent Owner argues that Meulen’s system avoids distortion near the middle where the user’s focus is more likely to be, while Chao, on the other hand, is directed to avoiding distortion of stylized borders on differently sized pages. PO Resp. 36–37 (citing Ex. 1006, 1:26–29; Ex. 1008 ¶¶ 1, 25; Ex. 2027 ¶¶ 91–92). This argument reads the prior art too narrowly and does not address Petitioner’s combination. Petitioner does not rely on Chao for its teaching of avoiding distortion near the borders of the image, but rather on its teaching of scaling the image while maintaining the design intent of the original image. Ex. 1008 ¶ 22; Ex. 1014 ¶ 67. Thus, Petitioner is applying Chao’s techniques of scaling (regardless of where the area of 92. Finally, Patent Owner argues that Chao’s approach of stretching/shrinking only the background and uniformly scaling entire foreground objects is suitable for graphic design but incompatible with Meulen which is concerned with adapting externally derived media source content for display on a fixed size screen. PO Resp. 37–38 (citing Ex. 2027 ¶ 93). We disagree with Patent Owner’s argument because it does not address Petitioner’s combination. Petitioner relies on Chao’s teaching of stretching/shrinking of background elements and applies that stretching/shrinking to Meulen’s images displayed on its screen. Pet. 91–92 (citing Ex. 1008 ¶¶ 28, 63; Ex. 1002 ¶ 263). The fact that Chao applies its teaching to graphic design does not prevent a POSITA from applying those teachings to Meulen’s media content displayed on its screen.” slip op. at 20

  Patent outcomesUS 10,015,413 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,015,413
• Apple Inc. v. Theta IP, LLCSome claims unpatentable
  PTAB · Nov 25, 2025 · IPR2024-00819 · APJ Russell E Cass · IPR · Final written decision

  Claims 1–19 are unpatentable as obvious over Behbahani, Leete, and Tan; claim 20 was not shown unpatentable because the references did not teach its required comparison of desired and interferer signal strengths.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “Petitioner thus proposes a Master’s degree with two years of experience, while Patent Owner proposes a Bachelor’s degree with five years of experience. At the institution stage, we did not see a material difference in the proposals given that both parties also indicate that more education could substitute for less experience and vice versa, and thus adopted Patent Owner’s proposal. Inst. Dec. 9. We requested that the parties address during trial if either believed that the choice of one proposal over the other would make a difference in the patentability analysis. Id. Neither party has done so. Accordingly, because nothing in the record persuades us that our preliminary finding in the Institution Decision was incorrect, and because neither party has challenged our finding, we maintain our adoption of Patent Owner’s proposed level of ordinary skill in the art.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner

    “Here, as in the Director’s example, Petitioner advanced a narrower construction of the dynamic limitations before the district court, which the district court declined to adopt. Pet. 9; Ex. 2015; Ex. 2025, 31–47. Instead, the district court adopted a “plain-and-ordinary meaning” construction, which Patent Owner proposed. PO Resp. 38; PO Sur-reply 10 n.2; Ex. 2015; Ex. 2025, 31–47. In the Petition, Petitioner proposed applying the plain and ordinary meaning construction that had already been preliminarily adopted by the district court. Compare Pet. (filed May 1, 2024) with Ex. 2015 (preliminarily adopting plain and ordinary meaning construction on March 25, 2024). Applying Revvo, we find that Petitioner had a sufficient reason for advancing the broader, court-adopted construction in this IPR. Thus, we give the dynamic limitation its plain-and-ordinary meaning, which is “adjusting during operation based—at least in part—on information gained during operation.”” slip op. at 13

  • Prior constructionPrior construction adoptedDecided for patent owner

    “In our Institution Decision, we stated that we “will give the term ‘signal path’ its ‘plain and ordinary meaning’ and not limit it only to analog components, as the district court found and the parties agree.” Inst. Dec. 11. Given that the parties continue to agree on this point, we see no need to depart from the construction we adopted in our Institution Decision. Moreover, applying Revvo, we find that Petitioner had a sufficient reason for advancing the broader, court-adopted construction in this IPR for the same reasons as discussed above. In this proceeding, the dispute between the parties concerns the application of this and the surrounding claim language (i.e., “in the receiver signal path,” “in the signal path”) to the disclosures in Behbahani. See PO Resp. 43–45. Therefore, we will provide further discussion in the context of the parties’ arguments regarding Behbahani below. However, we agree with Patent Owner’s plain reading of the claim language to the extent it requires adjusting an impedance and/or bias current of a circuit while it is in the signal path. See Id. at 50–51.” slip op. at 14

  • Expert testimonyPatent owner expert discountedOther

    “Patent Owner’s arguments generally fail to address why Behbahani’s Variable Bandpass Filter Block does not teach the recited “plurality of circuits [comprising/including] . . . a filter,” and instead focus on why the low-pass and high-pass filter circuits do not teach the limitation, which is not Petitioner’s position. As stated above, we agree with Patent Owner’s plain reading of the claim language – i.e., that it “requires adjusting the bias, in or of a circuit.” See PO Resp. 49. However, Patent Owner’s reading of the claim does not persuasively address why the Variable Bandpass Filter Block does not teach the recited “circuit.” We have reviewed Dr. Larson’s cited testimony and disagree with Patent Owner that he provided “a well-supported opinion . . . as to why a [person of ordinary skill in the art] would not understand the entire bandpass box to be a single ‘circuit,’ or to reflect variation in ‘an impedance’ or ‘a bias’ in the claims.” Sur-reply 4 (citing Ex. 2020 ¶¶ 46–48, 71, 74–83). Dr. Larson testifies that the ’330 patent (which has the same specification as the ’164 patent) “teach[es] these adjustments [that dynamically change operating parameters] as changes effected in a single circuit block.” Ex. 2020 ¶ 46 (citing, e.g., Ex. 1001, Figs. 8A, 9A, 8:20–25, 8:36–39, 9:36–59, 10:1–18 (emphasis added)). Dr. Larson does not provide further explanation as to what he means by a “single circuit block,” but relies on Figures 8A and 9A, which show a “function block,” and other disclosures referring to a “function block.” See id. There is no dispute that the recited “circuit” in the receiver signal path is referring to these “function blocks.” See Tr. 22:20–23:4. The ’164 patent states that Figure 8A, which includes function block 820, is “an embodiment of the present invention” 8:28–30. Similarly, Figure 9A, which includes function block 920, “illustrate[s] one of the possible power saving techniques.” Id. at 3:41–42. The ’164 patent describes that “[f]unctional block 820 . . . may be a filter, mixer, amplifier, or other circuit or circuits in a wireless transceiver or other electronic circuits or system.” Id. at 8:30–33 (emphasis added). Based on these disclosures, we are not convinced that Function Block 820 or 920 cannot include multiple filters in a Variable Bandpass Filter Block, or that Behbahani’s Variable Bandpass Filter Block does not teach the recited “circuit.” Dr. Larson also relies on Figure 6 of the ’164 patent to conclude that” slip op. at 45

  Patent outcomesUS 11,564,164 mixed
  Claim construction§ 103 obviousnessDiscretionary denialcites KSR · Graham
  Patents in suitUS 11,564,164
• Google LLC v. Eyesmatch Ltd.Some claims unpatentable
  PTAB · Nov 21, 2025 · IPR2025-00296 · APJ Neil T Powell · IPR · Final written decision

  Claims 1–18 are unpatentable: claims 1–6 and 10–12 over Rosenberg and Park, and claims 3, 4, 7–9, and 11–18 over Rosenberg, Park, and Geisner.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “December 18, 2012, would have a bachelor’s degree in electrical or computer engineering, or a closely related field such as computer science, and two years of work experience with image capture and processing systems or related fields.” Pet. 7 (citing Karam Decl. ¶ 91). Petitioner adds that “[a] person with less and/or different education, but more relevant practical experience, or vice versa, may also meet this standard.” Id. According to Petitioner, [t]he prior art also evidences such level of skill.” Id. Patent Owner states that it “applies Petitioners’ proposed level of skill for purposes of this Response.” PO Resp. 9 (citing Forsyth Decl. ¶¶ 53–54). For this Decision, we adopt the formulation of the level of ordinary skill in the art proposed by Petitioner and applied by Patent Owner as consistent with the prior art before us in this proceeding.10” slip op. at 9

  • Prior constructionPrior construction adoptedDecided for patent owner

    “Turning to the substantive issues, we find the District Court’s “mirror tracking mode” construction to be well-reasoned and supported by the record, and we therefore adopt that construction and its reasoning. As the District Court points out, both the “double the distance” and “same size” aspects of its construction are expressly discussed in the ’109 patent, which is incorporated in the ’110 patent. See Ex. 2008, 16 (citing Ex. 1021, 2:5–27, Figs. 5A, 5B), 40 (citing “same reasons set forth regarding the term ‘it appears to mimic a reflection of a mirror’” in support of construction of “mirror tracking mode”). So, too, is “flipping” or reversing of the image disclosed. Id. at 17 (citing Ex. 1021, 14:46–51, 15:41–47), 40.” slip op. at 14

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “Post-institution, Patent Owner invites us to construe limitation 1[f]’s recitation of “mirror tracking mode” and limitation 1[c]’s recitation of “adaptive transformation mapping.” PO Resp. 9–14. Regarding the latter, Patent Owner explains that “[i]n the District Court Litigation, ‘adaptive transformation mapping’ was construed as ‘continuously variable transformation mapping’ and ‘transformation mapping’ was construed as a ‘selected set of image transformations.’” Id. at 14 (citing Ex. 2008, 14, 37; Ex. 2013 ¶¶ 25, 27). Patent Owner does not, however, identify any way that those claim constructions affect our analysis of the parties’ patentability disputes. We find it unnecessary in resolving the parties’ patentability disputes to construe expressly limitation 1[c]’s recitation of “adaptive transformation mapping.”” slip op. at 11

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

    “persuasively address limitation 1[f]’s “mirror tracking mode.” In particular, Petitioner does not address persuasively the requirement, as explained in Section II.B above, that mirror tracking mode involves processing camera-captured images in a way that “maintains roughly the same size regardless of the user movement.” At odds with this requirement, Petitioner founds its case on an assertion that “Haan teaches the claimed mirror tracking mode” because “if the viewer is within 35 cm of the camera, a tracking mode is entered, applying resizing transformation.” Pet. 44 (emphasis added) (citing Ex. 1005 ¶¶ 75–76, 80–82, 90–94, 97; Ex. 1003 ¶¶ 205–210). The resizing transformation Petitioner references actually involves magnifying the user’s image by an amount that changes based on the user’s position relative to the camera, quite the opposite of maintaining image size regardless of the user movement. Ex. 1005 ¶¶ 75–76, Fig. 8. Thus, Petitioner’s initial position is unpersuasive. Petitioner’s shift to Haan’s “reflective mirror mode and conventional mirror period in the dual mode” is also unavailing. Reply 8. Consistent with Patent Owner’s arguments, Petitioner does not provide persuasive evidence that these operating states of Haan’s device involve any processing of camera-captured images. Sur-reply 13–14. To the contrary, Haan suggests that anytime its device provides an unmagnified image, it comes from a reflection off a physical reflective surface. See, e.g., Ex.1005 ¶ 76 (“This can be done for instance by using the device as a simple mirror, i.e. not displaying an image on the display device, but using the device in the reflective mode.”) (emphasis added), ¶ 92 (“a simple reflective mode, to act as a mirror”), ¶ 29 (“for a first range of positions, no image is displayed, whereby the reflective layer acts as a mirror, and for a second range of positions, the recorded image is displayed.”) (emphasis added). We also find unpersuasive Petitioner’s Reply arguments based on Haan’s disclosure of smoothly transitioning from “using the device as a simple mirror” (i.e., using a physical reflecting surface) to displaying a magnified image. Reply 11 (citing Ex. 1005 ¶¶ 76, 80). To the extent this may establish a point around the transition at which Haan’s system displays an image with relatively little magnification, it does not establish that Haan teaches, suggests, or renders obvious holding the displayed size roughly constant, “regardless of the user movement.” Indeed, given Haan’s focus on helping the user see things more clearly with image magnification, Petitioner’s argument that it would have been obvious to hold the size of the image constant is not persuasive. See, e.g., Ex. 1005 ¶ 4.” slip op. at 23

  Patent outcomesUS 8,982,110 mixed
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 8,982,110
• DISH Network LLC v. Entropic Communications, LLCSome claims unpatentable
  PTAB · Nov 14, 2025 · IPR2024-00373 · APJ Jon M Jurgovan · IPR · Remand

  Claims 1, 4–8, and 10–16 are unpatentable under § 103; claims 2, 3, 9, and 17 were not shown unpatentable on any asserted ground.

  RulingsRemand decision

  • RemandOther

    “The Director then issued an Order, Paper 47 (“Director’s Order” or “Dir. Ord.”) granting Director Review, vacating-in-part the Final Written Decision, and remanding the case to this Board panel for proceedings consistent with the Order. The Director vacated-in-part the Final Written Decision because it did not sufficiently address Patent Owner’s arguments with respect to claim 17 (and similar claims 2 and 9). We have jurisdiction under 35 U.S.C. § 6. This Final Written Decision on Remand from Director Review is entered pursuant to 35 U.S.C. § 318(a). Having reviewed the complete trial record, we determine that Petitioner has shown, by a preponderance of the evidence, that the challenged claims are unpatentable except for claims 2, 3, 9, and 17.” slip op. at 3

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art The person of ordinary skill in the art is a hypothetical person who is” slip op. at 13

  • Obviousness (§103) › Analogous artAnalogous artDecided for petitioner

    “2. Analogous Art – DSL-Book A reference is analogous art to the claimed invention if: (1) the” slip op. at 75

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner

    “4. Motivation to Combine Amit and Jacobsen Petitioner contends that a POSITA would have modified “Amit’s” slip op. at 31

  Patent outcomesUS 7,594,249 mixed
  § 103 obviousnesscites KSR
  Patents in suitUS 7,594,249
• Bizlink Technology, Inc. v. Anderson Power Products, Inc.Some claims unpatentable
  PTAB · Nov 7, 2025 · IPR2024-00687 · APJ Lisa L Tsang · IPR · Final written decision

  Claims 1–3 and 7–12 are unpatentable; claim 4 is not shown unpatentable because Winkler does not establish that its insulating barriers press against each other when partially disconnected.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for patent owner

    “We agree with Patent Owner’s first argument that a level of ordinary skill in the art that encompasses an individual having experience with electrical circuits but not electrical connectors is not consistent with the technology and descriptions in the ’017 patent. See PO Resp. 7. The field of the invention of the ’017 patent is “electrical connectors, and more particularly, . . . an electrical connector that suppresses arcing if connected or disconnected while current is flowing.” Ex. 1001, 1:7–9. Consistent therewith, the challenged claims are directed to “[a]n electrical connector pair” and recite structural features of the electrical connector pair. Id. at 4:20–56, 5:1–20.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “We find that the intrinsic evidence supports maintaining our construction in the Institution Decision that “insulating” means “electrically insulating.” See Dec. 11–12. In particular, we agree with Patent Owner’s argument that the insulating barriers would be unable to be configured to “block[] substantially all through-air arcing paths between the first and second electrical contacts,” as claimed, unless they were electrically insulating. See Ex. 1001, 4:36–44. Moreover, as Patent Owner avers, our interpretation of “insulating” as it applies to the first and second insulating barriers should be the same as for the first and second housings. See Digital Biometrics, 149 F.3d at 1345 (“whatever interpretation we assign [to a word used in a claim] should encompass both uses because the same word appearing in the same claim should be interpreted consistently” (citation omitted)).” slip op. at 15

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “Ex. 2001 ¶ 102. Accordingly, we find Dr. Eldering’s testimony persuasive as to this issue and determine that the diagram shows what an ordinarily skilled artisan would have reasonably inferred Winkler to disclose when the connectors are partially disconnected. Compare Ex. 1004, Fig. 2, with Pet. 33; see also Ex. 1004, 3:14–27 (discussing the process by which the connectors are engaged with each other).” slip op. at 44

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “Id. at 3:27–37 (emphasis added). These wall portions 58 are located between the distal ends of the terminals and where Petitioner proposes to add a printed circuit board or wiring board to Winkler. See id. at Fig. 2; Pet. 44–46 (diagrams showing Winkler as modified to have a printed circuit board or wiring board). As such, movement of Winkler’s terminals appears to be mostly limited to within their respective receiving pockets. Given the above teachings, we fail to see how Petitioner’s proposed modification would have meaningfully interfered with the degree of freedom of movement required by Winkler’s terminals. Notably, Mr. Locati’s testimony regarding this issue is conclusory. See Ex. 2001 ¶ 120. Because movement of Winkler’s terminals occurs primarily in the receiving pockets, we also do not discern how the solder joint of Petitioner’s proposed modification would experience undue stress or risk breaking due to that movement. See Ex. 1004, 1:47–55, 3:14–37, Fig. 2; Pet. 44–46. This is particularly true in view of Winkler’s teaching that each cylindrical end portion may be soldered to a cable. See id. at 2:6–10; see also Pet. 43 (arguing that Winkler teaches soldering to a cable but not specifically to a printed circuit or wiring board). Accordingly, we determine that Petitioner has shown by a preponderance of the evidence that claim 8 would have been obvious over the combined teachings of Winkler and Handbook.” slip op. at 55

  Patent outcomesUS 8,808,017 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,808,017
• Recor Medical, Inc. / Otsuka Medical Devices Co., Ltd. v. Medtronic Ireland Manufacturing Unlimited Co.Some claims unpatentable
  PTAB · Nov 3, 2025 · IPR2022-00431 · APJ Eric C Jeschke · IPR · Remand

  On remand, claims 1–3 and 8–12 are unpatentable over the instituted grounds; claim 4 was not shown unpatentable.

  RulingsRemand decision

  • RemandOther

    “Federal Circuit (Paper 33), which vacated the original Final Written Decision and remanded the proceeding to the Board. See ReCor Med., Inc. v. Medtronic Ir. Mfg. Unlimited Co., No. 2023-2251, 2025 WL 944511 (Fed. Cir. Mar. 27, 2025) (“the Appeal Decision” or “Appeal Dec.”); see also Paper 41 (copy of the Appeal Decision). The Federal Circuit’s mandate issued on May 5, 2025. See Paper 40. We have jurisdiction under 35 U.S.C. § 6, and we issue this Final Written Decision on Remand under 35 U.S.C. § 318(a) and 37 C.F.R. § 42.73. For the reasons below, on the complete record, we conclude that Petitioner has proven, by a preponderance of the evidence, the unpatentability of claims 1–3 and 8–12 of the challenged patent, and we conclude that Petitioner has not proven, by a preponderance of the evidence, the unpatentability of claim 4.” slip op. at 2

  • Obviousness (§103) › Objective indicia / secondary considerationsObjective indicia outweighedNot shown unpatentable

    “and Petitioner’s rebuttal evidence. Objective evidence of nonobviousness, when present, must be considered as part of an obviousness inquiry. Transocean Offshore Deepwater Drilling, Inc. v. Maersk Drilling USA, Inc., 699 F.3d 1340, 1349 (Fed. Cir. 2012). Notwithstanding what the teachings of the prior art would have suggested to one of ordinary skill in the art, the totality of the evidence submitted, including objective evidence of nonobviousness, may lead to a conclusion that one or more of the challenged claims would not have been obvious to one of ordinary skill in the art. In re Piasecki, 745 F.2d 1468, 1471–72 (Fed. Cir. 1984).” slip op. at 50

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableNot shown unpatentableMixed

    “1. Claims 1–3 and 8–11 Because the obviousness ground based on Levin and Acker is dispositive as to challenged claims 1–3 and 8–11, we need not reach this additional ground as to those claims. See SAS Inst. Inc. v. Iancu, 584 U.S. 357, 371 (2018) (holding that a petitioner “is entitled to a final written decision addressing all of the claims it has challenged”); Boston Sci. Scimed, analysis in the appeal to the Federal Circuit. See Appeal Dec. *1–*2 (summarizing grounds at issue on appeal and not discussing anticipation based on Acker). Inc. v. Cook Grp. Inc., 809 F. App’x 984, 990 (Fed. Cir. 2020) (nonprecedential) (stating that the “Board need not address issues that are not necessary to the resolution of the proceeding,” such as “alternative arguments with respect to claims [the Board] found unpatentable on other grounds”); SK Hynix Inc. v. Netlist, Inc., IPR2017-00692, Paper 25 at 40 (PTAB July 5, 2018) (determining all challenged claims to be unpatentable and not addressing additional grounds). 2. Dependent Claim 4 As to dependent claim 4, in the context of this ground, Petitioner relies on Acker as to the additional limitations in claim 4 in the same manner as relied on in the context of the ground based on Levin and Acker. See Pet. 73 (“The combination teaches this element for the same reasons described in [the obviousness ground based on Levin and Acker], claim 4, with the exception that [one of ordinary skill in the art] would have been motivated based on his or her knowledge of prior renal denervation work, as noted above.”). Thus, for the same reasons discussed above (see § II.C.3.c), we determine, based on the complete record, that Petitioner has not demonstrated by a preponderance of the evidence that claim 4 would have been obvious based on Acker and the knowledge of one of ordinary skill in the art. G. Asserted Obviousness of Claim 12 Based on Acker, the Knowledge of a Person of Ordinary Skill in the Art, and Yock Petitioner asserts that claim 12, which depends from independent claim 1, would have been obvious based on Acker, the knowledge of one of ordinary skill in the art, and Yock. Pet. 12, 75; Pet. Reply 35–36. Patent Owner provides arguments addressing this ground. PO Resp. 57–60; PO” slip op. at 75

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “1. Independent Claim 1 Petitioner contends that Acker discloses each limitation of claim 1. Pet. 61–63; Pet. Reply 35. In the “Overview of the Ground” section, Petitioner references its proposed construction of the phrase “configured to” and states that “it is proper to consider whether the prior art is ‘capable of’ performing the recited functions, as opposed to requiring that a designer of a prior art device have actually conceived of the recited functional language.” Pet. 61. Petitioner continues: “If the PTAB agrees that this is the proper approach to claim construction, then Acker also anticipates the claims challenged in this ground.” Id. For the reasons below, we determine, based on the complete record, that Petitioner has not demonstrated by a preponderance of the evidence that claim 1 is anticipated by Acker. As to element 1d, which includes the phrase “configured to,”16 Petitioner states that Acker is capable of being used to target renal neural fibers outside of the blood vessel to thermally induce modulation of target neural fibers while protecting non-target tissue in the blood vessel wall from thermal injury for the reasons discussed under claim 1, limitation [1d] and in the section entitled “Reasonable Expectation of Success”, beginning on page 37 [of the Petition]. Pet. 62–63 (citing Daft Pet. Decl. ¶ 179) (first bracketed text added by Petitioner). Patent Owner argues that, in the context of this asserted ground based” slip op. at 71

  Patent outcomesUS 8,845,629 mixed
  § 102 anticipation§ 103 obviousnesscites Phillips · KSR
  Patents in suitUS 8,845,629
• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.Some claims unpatentable
  PTAB · Oct 23, 2025 · IPR2024-00790 · APJ Jo-Anne M Kokoski · IPR · Final written decision

  Claims 1–3 are unpatentable as obvious over Kim; claims 4 and 5 were not shown unpatentable over the asserted grounds.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “SuperGuide, 358 F.3d at 875 (“We review the patent’s written description and drawings to confirm that the patentee’s own use of the disputed term is consistent with the meaning given to it by the court.”). The ’031 patent teaches that dielectric pairs of different tiers are etched to form staircases extending along the x-y plane. Ex. 1001, 13:27–28. As described above (§ I.D, supra), dielectric filling structure 311 is formed by depositing a dielectric filling material to fill the space remaining after portions of dielectric stack 203 are removed to form staircase structure 303. Id. at 13:36–41; see also id. at 22:63–65 (“Memory structure 1200 can be formed by forming dielectric filling structure 1201 to fill the space formed by the removal of portions of dielectric stack 1003.”) The ’031 patent then teaches that excess dielectric filling material overlying the topmost surface of staircase structure 303 is removed using a suitable planarization method. Id. at 13:41–44; see also 22:67–23:5 (performing a planarization process to remove excess dielectric filling structure 1201 over the top surface of memory structure 1200). According to the ’031 patent, the portion of the deposited dielectric filling material that remains “over staircase structure 303 and isolation layer 109” forms “dielectric filling structure 311 that surrounds staircase structure 303.” Id. at 13:44–48 (emphasis added); see also id. at 1:56–58 (stating in “some embodiments, the memory device also includes a filling structure surrounding the multiple-stack staircase structure”). structure is etched along the x-, y-, and z-axes, and the dielectric filling structure fills the spaces in the x-, y-, and z-directions created when the staircase structure is etched. Because the excess portion of the dielectric filling structure overlying the top of the staircase structure is removed, what remains is dielectric filling structure in the spaces around the staircase structure in the x-, y-, and z-planes. In this way, the ’031 patent teaches that the dielectric filling structure surrounds, i.e., is all around or encircles, the staircase structure.” slip op. at 11

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “(“POSITA”) would have had “a bachelor of science degree in electrical engineering or a similar discipline” with “2–3 years of professional experience working with (e.g., researching, designing, or teaching) monolithic 3D structures and NAND memory devices,” or “an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 22–23. Petitioner further contends that a “POSITA would have been aware of and generally knowledgeable about 3D NAND’s structure, its component parts, how it operates, and how it is controlled.” Id. at 23 (citing Ex. 1003 ¶¶ 41–44). Patent Owner states that it does not object to the definition of a POSITA proffered by Petitioner. PO Resp. 13–14 (citing Pet. 22). In the Institution Decision, we adopted the assessment offered by Petitioner. Dec. 7. Because Petitioner’s definition of the level of skill in the art is consistent with the ’031 patent and the asserted prior art, we maintain it for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir 2001).” slip op. at 7

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundMixed

    “Dr. Banerjee adequately explains why a POSITA would have been motivated to make dummy structures DS with a conductive core as Petitioner proposes. In an obviousness analysis, some kind of reason must be shown as to why a POSITA would have thought of combining or modifying the prior art to achieve the patented invention. See Innogenetics, N.V. v. Abbott Labs., 512 F.3d 1363, 1374 (Fed. Cir. 2008). Here, Petitioner offers only the general proposition that pillar support structures comprising electrically conductive material were known in the art, but this does not provide a reason why a POSITA would have been motivated to modify Kim’s dummy structures. Pet. 55–56; Ex. 1003 ¶¶ 156–157. Petitioner’s arguments and Dr. Banerjee’s testimony with respect to the modification of Kim leaves an analytical gap that does not apprise us of why a POSITA would have modified Kim’s dummy structures to include a conductive core as the pillar-support material recited in claim 4. Instead, Petitioner attempts to imbue a POSITA with the knowledge of the claimed invention, when no prior art reference, references of record, or other evidence conveys or suggests that knowledge. Petitioner’s argument that a POSITA would have modified Kim in this way appears to be premised on Petitioner’s knowledge of the ’031 patent disclosure. This is improper hindsight reasoning. Petitioner needed to explain sufficiently what invention to consider modifying Kim’s dummy structures to include a conductive core. Petitioner fails to provide such an explanation. See W.L. Gore & Assoc., Inc. v. Garlock, Inc., 721 F.2d 1540, 1553 (Fed. Cir. 1983) (In an obviousness analysis, we must “cast the mind back to the time the invention was made” and “occupy the mind of one skilled in the art who is presented only with the references, and who is normally guided by the thenaccepted wisdom in the art.”).” slip op. at 23

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentableDecided for patent owner

    “Dr. Banerjee adequately explains why a POSITA would have been motivated to make dummy structures DS with a conductive core as Petitioner proposes. In an obviousness analysis, some kind of reason must be shown as to why a POSITA would have thought of combining or modifying the prior art to achieve the patented invention. See Innogenetics, N.V. v. Abbott Labs., 512 F.3d 1363, 1374 (Fed. Cir. 2008). Here, Petitioner offers only the general proposition that pillar support structures comprising electrically conductive material were known in the art, but this does not provide a reason why a POSITA would have been motivated to modify Kim’s dummy structures. Pet. 55–56; Ex. 1003 ¶¶ 156–157. Petitioner’s arguments and Dr. Banerjee’s testimony with respect to the modification of Kim leaves an analytical gap that does not apprise us of why a POSITA would have modified Kim’s dummy structures to include a conductive core as the pillar-support material recited in claim 4. Instead, Petitioner attempts to imbue a POSITA with the knowledge of the claimed invention, when no prior art reference, references of record, or other evidence conveys or suggests that knowledge. Petitioner’s argument that a POSITA would have modified Kim in this way appears to be premised on Petitioner’s knowledge of the ’031 patent disclosure. This is improper hindsight reasoning. Petitioner needed to explain sufficiently what invention to consider modifying Kim’s dummy structures to include a conductive core. Petitioner fails to provide such an explanation. See W.L. Gore & Assoc., Inc. v. Garlock, Inc., 721 F.2d 1540, 1553 (Fed. Cir. 1983) (In an obviousness analysis, we must “cast the mind back to the time the invention was made” and “occupy the mind of one skilled in the art who is presented only with the references, and who is normally guided by the thenaccepted wisdom in the art.”).” slip op. at 23

  Patent outcomesUS 10,868,031 mixed
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 10,868,031
• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.Some claims unpatentable
  PTAB · Oct 22, 2025 · IPR2024-00794 · APJ Michael T Cygan · IPR · Final written decision

  Claims 1 and 6 are unpatentable over Park; claims 2–5 and 7–11 were not shown unpatentable on the asserted grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art Petitioner asserts that a person of ordinary skill in the art (“POSITA”) at the critical time “would have had a bachelor’s degree in electrical engineering or a similar discipline, along with 2-3 years of professional experience working with (e.g., researching, designing, or teaching) NAND flash memory devices, or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 19 (citing Ex. 1003 ¶¶ 36–37). Petitioner further asserts that a POSITA “would have been aware of and generally knowledgeable about 3D NAND’s structure, its component parts, how it operates, and how it is controlled.” Id. Patent Owner does not object to this assessment, arguing that its claims are valid regardless of the precise definition. PO 3 Neither party presents evidence or arguments regarding objective evidence of non-obviousness. skill, as it appears to be consistent with the specification of the ’623 patent and the prior art of record.” slip op. at 5

  • Expert testimonyPetitioner expert discountedMixed

    “the Petition, Petitioner’s approach to Shibata’s drive circuit and Park’s dummy channel/open region teachings results in a deficiency in its showing of reasonable expectation of success for its expressed combination of extending Park’s insulative trenches to replace some of its common source lines. Petitioner relies solely on the fact that the references are capable of performing the relied-upon functions or could possess the relied-upon structure. See, e.g., Pet. Reply 19–20 (stating, “If Shibata accommodates this type of trench . . . there is no reason Park cannot as well,” and “Park itself already presents a variety of ways to minimize any etching problem that may be encountered when using wet etching”). But Park does not describe its dummy channel or open region teachings as generally applicable to all of its embodiments. And Petitioner needs to show a reason why the application of Shibata would be reasonably expected to have been successfully applied in Park, not merely state that there is “no reason” to expect that it would not be successful. See DSS Tech. Mgmt., Inc. v. Apple Inc., 885 F.3d 1367, 1377 (Fed. Cir. 2018) (finding that even where two structures have “the same physical structure,” applying the teachings of one structure to the other requires “additional, reasoned analysis.”). The knowledge of one skilled in the art cannot bridge this gap, because these are inventive features of Park and Shibata. Furthermore, Petitioner also has not sufficiently explained, for any of its proposed augmentations, how metal gate deposition would occur sufficiently in the most remote regions of the long, parallel insulating layers in Petitioner’s Park-Shibata combination of such regions to avoid the risk of incomplete gate electrode layers in the final memory device that Patent Owner argues would result in a significant trade-off in memory device accuracy, and device scalability. PO Resp. 68 (citing Ex. 2010 ¶ 145). For example, Dr. Lee addresses only etching issues, not deposition issues. Ex. 1025, ¶¶ 32–47.” slip op. at 46

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “We agree with Petitioner. As pointed out by Patent Owner, the “trenches formed in the BSG” language of claim 1 reflects specific description of the gate-first method of manufacturing, but not the gate-last method of manufacturing. Ex. 1001, 7:17–19 (“referring to Fig. 1A, one or more first dielectric trenches . . . are formed in the one or more BSGs”). However, as Petitioner points out, the claims are to a memory “device,” not to a method of manufacturing or a device produced by specific manufacturing steps. Pet. Reply 1. During prosecution of the application that matured into the ’623 patent, the Examiner determined that the device of claim 1 was distinct from a separately claimed method of manufacturing and The Examiner’s requirement stated that the memory device of claim 1 is not limited by the disclosed process of manufacture because “the process claims require . . . deposition steps of polysilicon whereas the product claims do not require any polysilicon.” Id. Applicant agreed “without traverse” with the Examiner’s determination and selected to pursue only the “device” claims. Id. at 596 (“Applicant elects, without traverse, Invention I, Claims 1–11, drawn to a device”).4 The distinctiveness is also supported by the discussion in the ’623 patent of “formed in the BSG” that describes its device separately from its method of formation. The ’623 patent describes that “[i]n the disclosed memory device, one or more first dielectric trenches are formed in the BSG and extend in a length direction of the substrate to separate the BSG into a plurality of sub-BSGs.” Ex. 1001, 2:25–28. This description precedes, and is separate from, its description of an aspect of a process for manufacturing a memory device in which the BSG layer is formed and then “dielectric trenches are formed” that may “pass through the BSG layer” so that the “BSG layer is separated by the one or more first dielectric trenches into a plurality of sub-BSG layers.” Id. at 3:30–45. The description of the device having trenches formed in the BSG, which is not limited to a particular manufacturing process, further supports Petitioner’s contention that the “formed in the BSG” language is not limited to a particular manufacturing embodiment.” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageTerm construed board ownDecided for patent owner

    “We do not agree that such arguments support Patent Owner’s conclusion. Patent Owner acknowledges that two portions of a BSG that are connected at a small opening are not separated because both portions remain electrically connected to each other. Id. at 17 (stating, “common source regions 52a is merely in the middle of a single sub-BSG 2 (‘SUB-BLK2’) and does not divide it into further sub-BSGs because there is an H-cut 72 that connects the two sides of the common source region such that both regions are part of the same sub-BSG”) (citing Ex. 1001, 9:15–19, 9:41–44) (emphasis omitted); Ex. 1026, 34:4–15, 41:23–42:16 (Dr. Kuhn attesting that common source regions may isolate adjacent BSGs). Patent Owner considers other portions of the BSG to be separated into sub-BSGs because there is no such connection between the sub-BSG portions. Id. at 17–18 (annotating Ex. 1001, Fig. 1B). Under such reasoning, the addition of a trench closing a gap between two neighboring BSG portions, thereby breaking the electrical connection therebetween, would “separate” the two BSG portions into further sub-BSGs. In its obviousness assertions, Petitioner argues for such an interpretation of the claim. See Pet. Reply 10 (“Park’s layers 111 electrically separate its BSG”). Based on the above, we determine that the phrase “dielectric trenches formed in the BSG and extending in a length direction of the substrate to perform electrical separation between sub-BSGs, but does not require that the trenches act alone, extending from one end of the device to the other across the entire BSG. Similarly, the trenches need not have any particular length, and need only to have some length that performs that separation.” slip op. at 13

  Patent outcomesUS 10,950,623 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,950,623
• Tesla, Inc. v. Autonomous Devices, LLCSome claims unpatentable
  PTAB · Oct 21, 2025 · IPR2024-00745 · APJ Russell E Cass · IPR · Final written decision

  Claims 45–47, 51, 59, 60, 68, and 69 are unpatentable; claims 56 and 57 are not shown unpatentable. Substitute claims 85–88 and 91 are unpatentable; amendment is granted for claims 92 and 93.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “technical field, and the asserted prior art, we agree with Petitioner’s proposed qualifications for the person of ordinary skill in the art, except we decline to adopt “at least,” as that language is vague and open-ended. Otherwise, Petitioner’s proposed definition is consistent with the level of 3 Patent Owner does not present objective evidence of nonobviousness. skill reflected in the specification of the ’474 patent and the asserted prior art references. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). Accordingly, we adopt Petitioner’s assessment of the level of skill for one of ordinary skill in the art.” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner states that “no formal constructions are presently necessary,” and that it “maps [the] prior art in this Petition in a manner consistent with Patent Owner’s allegations of infringement before the district court.” Pet. 8 (citing Ex. 1017; Ex. 1003 ¶¶ 21–25). Patent Owner states that it believes there is no need to construe any terms of the challenged original claims because there is no underlying controversy regarding any claim terms. PO Resp. 10. For purposes of this Decision, we determine that it is not necessary to provide an express construction of any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017); Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”).” slip op. at 12

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “3. Motivation to Combine Buibas and Sinyavskiy Petitioner argues that “it would have been obvious to partition Buibas’[s] spiking networks according to the specific techniques disclosed in Sinyavskiy” for multiple reasons. Pet. 13 (citing Ex. 1005 ¶¶ 71–72, 85, 92, 179–203; Ex. 1006 ¶¶ 12, 185, 188, 191, Fig. 6A; Ex. 1003 ¶ 63). First, Petitioner asserts, one of ordinary skill “would have been motivated to partition Buibas’[s] spiking neural network as suggested by Sinyavskiy to parallelize task execution on the robot and improve learning capabilities (e.g., through faster learning, greater computing efficiency, and task-specific learning models) of the Buibas mobile robotic apparatus as described by Sinyavskiy and discussed by Dr. Janet.” Id. (citing Ex. 1003 ¶ 64). Second, Petitioner contends, “partitioning Buibas’[s] robotic brain as suggested by Sinyavskiy would have beneficially expanded the range of tasks that the robot could perform by dedicating partitions to specialized tasks.” Id. at 13– 14 (citing Ex. 1006 ¶¶ 12, 185, 188, Fig. 6A; Ex. 1005 ¶¶ 71–72, 85, 92, 179–205; Ex. 1003 ¶ 65). Third, Petitioner argues, one of ordinary skill “would have been motivated to partition Buibas’[s] spiking neural network as suggested by Sinyavskiy to permit unused partitions or unused resources in the partitions to be reassigned for different tasks,” which would allow for a network processing apparatus that has increased processing capability for the same network capacity while also having a lower cost, size and power consumption. Id. at 14 (citing Ex. 1006 ¶¶ 190–192, 105, 34, code (57); Ex. 1003 ¶ 66). Fourth, Petitioner argues that “Buibas briefly mentions that its spiking neural networks can be partitioned but discloses little detail about the partitioning,” which would invite one of ordinary skill to turn to other references, such as Sinyavskiy, for additional detail on how to implement partitioning. Pet. 14–15 (citing Ex. 1005 ¶ 92; Ex. 1003 ¶ 67). Fifth, Petitioner asserts, combining Buibas and Sinyavskiy would merely “involve[] the application of known techniques (e.g., Sinyavskiy’s partitioned neural network) to a known system (e.g., Buibas’[s] mobile robot and robotic brain) to yield predictable results (e.g., Buibas’[s] robot using a spiking neural network partitioned as taught in Sinyavskiy),” particularly because “the partitioning of the Buibas neural network is reminiscent of Recurrent Fuzzy Neural Networks (RFNNs) that were already commonplace at the end of the 1990’s.” Id. at 15 (citing Ex. 1003 ¶ 68). Finally, Petitioner contends, the proposed combination merely involves “use of known techniques (e.g., Sinyavskiy’s partitioned neural network) to improve a similar system (e.g., Buibas’[s] mobile robot and robotic brain).” Id. (citing Ex. 1003 ¶ 69). Petitioner further argues that one of ordinary skill “would have reasonably expected success implementing the combination, especially as Buibas and Sinyavskiy describe highly similar systems involving spiking neural networks used for training/operating robots.” Pet. 15–16 (citing Ex. 1005 ¶ 92; Ex. 1003 ¶ 70). Indeed, Petitioner contends, “Buibas itself confirms that its spiking neural network can be partitioned, while Sinyavskiy provides the details for doing so.” Id. at 16 (citing Ex. 1005 ¶ 92; Ex. 1003 ¶ 70).” slip op. at 14

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed

    “We agree with Patent Owner and Dr. Saber that these “weights” are numerical values associated with connections among neurons, and the “weight vectors” are merely lists of weights. PO Resp. 13–14; Ex. 2001 ¶¶ 66–67. When input is provided to the neural network, the network uses the weights of its connections in a feedforward calculation manner to provide an output that can include an instruction for operating a device. Ex. 2001 ¶ 66. We agree with and find credible Dr. Saber’s testimony that Buibas’s merging of weights or weight vectors results in updated network weights, and does not, by itself, disclose the merging of instruction sets for operating a device, or the correlation of the same set of inputs for all or a portion of a circumstance representation with instruction sets for operating two different devices. Ex. 2001 ¶¶ 65, 67, 69–71.” slip op. at 39

  Patent outcomesUS 11,663,474 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,663,474
• Toyota Motor Corp. v. Emerging Automotive LLCSome claims unpatentable
  PTAB · Oct 21, 2025 · IPR2024-00786 · APJ Frances L Ippolito · IPR · Final written decision

  Claims 10, 11, 13–16 were held unpatentable: claims 10, 11, 13, 15, and 16 as anticipated by Xiao, and claim 14 as obvious over Xiao and Singh.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “arguments, we agree with Patent Owner’s proposed construction that requires the server to conduct a compatibility check. We start with the express claim language. Claim 10 recites: determining, by the server, applicable settings for the selected vehicle, the applicable settings being settings that are preferred to be set as identified from the user profile and are compatible with settings that are settable in the selected vehicle. Ex. 1001, 33:10–14 (emphases added). The express claim language requires that the server determine applicable settings. Those applicable settings, determined by the server, must also be compatible with vehicle settings. As such, the plain and ordinary meaning of the claim language expressly requires that the server make a determination of applicable settings that are defined as being compatible with vehicle settings.” slip op. at 14

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (“POSITA”) at the time of the invention of the ’268 patent “would have had at least a Bachelor’s degree in electrical engineering, computer science, or closely related field, with at least two-to-four-years-experience in cloud services for settings customization, or a Master’s degree in electrical engineering, computer science, or equivalent.” Pet. 12 (citing Ex. 1009 ¶ 82). Patent Owner does not address the level of ordinary skill in the art. See, generally PO Resp. For purposes of this Decision, we adopt Petitioner’s proposal because it is reasonable and consistent with the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 12

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “However, contrary to Dr. Almeroth’s testimony and Petitioner’s position, Xiao’s server already does not attempt to command vehicles to do things they cannot do. Xiao teaches that server 118 generates commands for command codes that exist and are settable in the vehicle. Ex. 1010 ¶¶ 102– 103. As such, if there is no corresponding automobile setting, then Xiao’s server would not list those command codes for retrieval and would not send a command based on that retrieved command code to control the automobile systems to achieve the operator’s desired settings because that command code is not in the database. Our understanding of Xiao is further supported by Dr. Almeroth’s testimony: By listing them in the table of automobile command code information 606, Xiao shows that there are particular settings compatible with particular automobiles and particular desired settings. Thus, Xiao demonstrates the necessarily present characteristic that certain settings (e.g., commands) are compatible with certain automobiles. Ex. 1009 ¶ 96 (emphases added). We note that Dr. Malek further explains “the nonsensical result achieved by the combination would be that Xiao’s server, at best, in response to the command request issued by the operator, could ‘look up’ a command code to apply a vehicle-specific setting to that automobile 112, only to find that there is ‘none.’” We agree with Dr. Malek that there is a “None” command code in Xiao’s database when Xiao’s database already stores settings that are known to be settable in a specific vehicle per the operator’s preferences. Ex. 2011 ¶ 135. Thus, based on the complete record, we determine that Petitioner has not demonstrated by a preponderance of the evidence that Xiao in combination with Hayashi render claim 10 obvious.” slip op. at 79

  • BurdenNot shown unpatentable

    “Anticipation is not an ipsissimis verbis test, but “[a] claim is anticipated only if each and every element as set forth in the claim is found, either expressly or inherently described, in a single prior art reference.” Verdegaal, 814 F.2d at 631. Petitioner and Dr. Almeroth both acknowledge that Xiao discloses operators on the same account. Pet. 40–41; Ex. 1009 ¶ 170. But Petitioner and Dr. Almeroth do not explain sufficiently how Xiao discloses these operators have sub-user accounts. Petitioner further contends Xiao discloses plurality of accounts. Pet. Reply 18–19 (citing Ex. 1024, 33:1–44:10, 45:22–46:2); Ex. 1010 ¶ 65. Again, Petitioner has not adequately explained how the plurality of accounts includes sub-user accounts because Xiao discloses generally that multiple operators of a vehicle are on the same, single account. Ex. 1010 ¶ 66.” slip op. at 65

  Patent outcomesUS 9,171,268 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,171,268

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.