• Mara Renewables Corporation v. DSM IP Assets, B.V.Institution denied
  PTAB · Feb 23, 2024 · IPR2023-01342 · APJ Jon B Tornquist · IPR · Institution

  The Board denied institution because the petition did not show a reasonable likelihood that any challenged claim was anticipated or obvious over the asserted references.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). Having considered the arguments and evidence presented by Petitioner and Patent Owner, we determine that Petitioner has not demonstrated a reasonable likelihood of prevailing on at least one of the challenged claims of the ’959 patent. Accordingly, we deny institution of an inter partes review.” slip op. at 2

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that, as of the earliest claimed priority date of the ’959 patent, an ordinarily skilled artisan “would have had a Master of Science degree in an academic discipline emphasizing chemistry, chemical engineering, or biochemistry, in combination with training or at least two to three years of related work experience with lipid chemistry technologies, including but not limited to lipid extraction technologies.” Pet. 6 (citing Ex. 1003 ¶¶ 63–64). Alternatively, Petitioner proposes that an ordinarily skilled artisan “could have also had a Doctorate degree in a relevant academic discipline with one to two years of related work experience in the same discipline.” Id. Petitioner argues that an ordinarily skilled artisan “would have been familiar with microbial oils” and “would have understood the benefits of polyunsaturated fats (PUFAs), microbial sources for obtaining them, and methods for culturing and extracting oils from those microbial sources.” Id. (citing Ex. 1003 ¶¶ 36–48, 64). Patent Owner does not provide a definition of the level of ordinary skill in the art, but “reserves its right to proffer what it contends to be the appropriate level of ordinary skill in the art should the Board institute review.” Prelim. Resp. 15. Patent Owner asserts, however, that a person of ordinary skill in the art would have a detailed understanding of the information provided in its Technology Background section, including “the expected impact of cellular biomass growth characteristics on the proportion of triglycerides and phospholipids produced during a microbial fermentation.” Id. For purposes of this Decision, we adopt Petitioner’s definition of the skill level of an ordinarily skilled artisan as it is consistent with the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (holding that the prior art itself can reflect the appropriate level of ordinary skill in the art). As to the background knowledge possessed by the ordinarily skilled artisan, we agree that such an artisan would have been aware of methods for culturing and extracting oils from microbial sources, including the impact of growth characteristics on the proportions of triglycerides and phospholipids produced during microbial fermentation. Pet. 6; Prelim. Resp. 15.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner contends that all claim terms of the ’959 patent “should be given their plain and ordinary meaning.” Pet. 3. Patent Owner does not contend that any claim terms require construction. Prelim. Resp. 14–15. For purposes of this Decision, we determine that no claim terms require express construction. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 8

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “3. Analysis In order to anticipate a claim, a prior art reference “must not only disclose all elements of the claim within the four corners of the document, but must also disclose those elements ‘arranged as in the claim.’” NetMoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1370 (Fed. Cir. 2008) (quoting Connell v. Sears, Roebuck & Co., 722 F.2d 1542, 1548 (Fed. Cir. 1983)). Radianingtyas discloses microbial oils with various levels of DHA and arachidonic acid. There is no disclosure of an individual microbial oil, however, that contains at least 45% DHA and 1.5% or less arachidonic acid by weight as required by claim 1. With respect to the level of DHA, although Radianingtyas might be interpreted to disclose that some microorganisms can produce up to 60% DHA,8 Radianingtyas discloses that the DHA content of ONC-T18 is “typical[ly]” 35% of the total intracellular fatty acids, and in each experiment disclosed in Radianingtyas DHA was produced by ONC-T18 at 8 Radianingtyas discloses that “the oil producing microbe can produce a lipid composition comprising from about 25% to about 40% of an omega-3 fatty acid, such as n-3 DHA.” Ex. 1007, 26:31–33. It then gives examples that include 15%, 20%, 45%, 50%, 55%, and 60%, which are outside of the disclosed range. Id. at 26:33–34. Dr. Curtis contends the disclosure as a whole should be read as “from about 15% to about 60% of an omega-3 fatty acid, such as n-3 DHA.” Ex. 1003, 39 n.1. Dr. Curtis identifies no microbe in Radianingtyas, however, that is shown to produce more than 40% DHA, and Radianingtyas expressly notes that the typical DHA content produced by ONC-T18 is 35%. Thus, we question Dr. Curtis’ conclusions regarding the DHA content disclosure of Radianingtyas. levels less than “at least 45%.”9 Ex. 1007, 32:21–25 (noting that the “typical composition of fatty acids” produced by ONC-T18 includes 25% DHA), 34:4–37:14 (noting that the control microorganism produced 13.54%, 19.98%, 18.77%, 18.77%, 21.48%, 28.48%, and 14.13% DHA) (Figure 12), 91 (Table 5) (noting that total DHA produced by ONC-T18 was from 24- 34.2%), 99:22–24 (“Of particular interest is ONC-T18 which produces up to 90% of its C20 to C22 content as DHA which is approximately 35% of the total intracellular fatty acids.”). Thus, we are not persuaded that Radianingtyas discloses microbial oils produced by ONC-T18 that have a DHA content of “at least 45%.” As noted by Petitioner, Radianingtyas provides a definition of “purify” and “purifying,” and notes that when these terms are used, it means that a composition could be, for example, 90% pure. Pet. 11; Ex. 1007, 7:26–8:2. As an example of how the term “purified” may be used, Radianingtyas states “[f]or example, if a disclosed eukaryotic microorganism, for example, produces 35% DHA, this could be further ‘purified’ such that the final lipid composition was greater than 90% DHA.” Id. at 8:2–4. We are directed to no actual microbial oil in Radianingtyas, however, that was purified to have increased levels of DHA. Rather, Petitioner only proffers what Radianingtyas might say if such an oil existed or had been purified to increase levels of DHA.10” slip op. at 12

  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,757,959
• Opticis Co., Ltd. v. Inneos LLCInstituted
  PTAB · Feb 2, 2024 · IPR2023-01256 · APJ Terry J Owens · IPR · Institution

  The Board instituted review of claims 1, 2, 6, 7, and 9 on all five §103 grounds in the petition.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “We have authority to determine whether to institute an inter partes review. 37 C.F.R. § 42.4(a) (2023). Under 35 U.S.C. § 314(a), an inter partes review may not be instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” A decision to institute under 35 U.S.C. § 314 may not institute on fewer than all claims challenged in the petition. 37 C.F.R. § 42.108(a) (implemented as a result of SAS Inst., Inc. v. Iancu, 138 S. Ct. 1348, 1359–60 (2018)). Upon consideration of the arguments and evidence presented by Petitioner and Patent Owner, we are persuaded that Petitioner has demonstrated a reasonable likelihood that it would prevail in showing the unpatentability of at least one challenged claim. See 35 U.S.C. § 314(a). For the reasons explained below, we institute an inter partes review of all challenged claims.” slip op. at 2

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted

    “Ground 1 is based upon obviousness, not anticipation. Patent Owner’s argument is not well taken because it does not address what fixing Kurita’s single optical fiber (40) in place.” slip op. at 13

  • Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date, deniedInstituted

    “The purpose of requiring reasonable diligence by the first to conceive the invention but second to reduce to practice is to assure that the invention was not abandoned or unreasonably delayed by the first inventor during the period after the second inventor entered the field.” Brown v. Barbacid, 436 F.3d 1376, 1379 (Fed. Cir. 2006). “A patent owner need not prove the inventor continuously exercised reasonable diligence throughout the critical period; it must show there was reasonably continuous diligence.” Perfect Surgical Techniques, Inc. v. Olympus Am., Inc., 841 F.3d 1004, 1009 (Fed. Cir. 2016). “[T]here need not necessarily be evidence of activity on every single day if a satisfactory explanation is evidenced.” Monsanto Co. v. Mycogen Plant Sci., Inc., 261 F.3d 1356, 1369 (Fed. Cir. 2001). Thus, Patent Owner must provide an explanation that is satisfactory to indicate that the relied-upon computer modeling and prior art search update show reasonably continuous diligence from November 10, 2003 to January 15, 2004. Patent Owner has provided some evidence to show diligence from November 10, 2003 to January 15, 2004, but Patent Owner has not explained why, under the facts of this case, the evidence is sufficient to establish reasonably continuous diligence for the period before Bhandarkar’s effective filing date to the date of constructive reduction to practice. We have reviewed Petitioner’s contentions as to how Bhandarkar teaches the subject matter of the claims, and we find them sufficiently persuasive at this stage. Based upon the above-discussed evidence and that the optical combiner claimed in claims 1, 2, 6, 7, and 9 would have been obvious to one of ordinary skill in the art over Bhandarkar. slip op. at 26

  • PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner

    “institution under 35 U.S.C. § 314(a) because the factors identified in Apple, Inc. v. Fintiv, Inc., IPR2020-00019, Paper 11 (PTAB Mar. 20, 2020) (precedential) (“Fintiv”), weigh in favor of denying institution in view of the district court litigation (Prelim. Resp. 68–69). A Memorandum from Director Vidal titled Interim Procedure for Discretionary Denials in AIA Post-Grant Proceedings with Parallel District Court Litigation (USPTO June 21, 2022) (“Interim Procedure”)2 provides that “the PTAB will not deny institution of an IPR or PGR under Fintiv . . . where a petitioner stipulates not to pursue in a parallel district court proceeding the same grounds as in the petition or any grounds that could have reasonably been raised in the petition” (Interim Procedure 9). Petitioner has submitted such a stipulation (Paper 11). Thus, we do not exercise discretion to deny institution under 35 U.S.C. § 314(a).” slip op. at 27

  Claim construction§ 102 anticipation§ 103 obviousnessDiscretionary denialcites Phillips
  Patents in suitUS 7,198,416
• Intel Corporation v. Besang Inc.Instituted
  PTAB · Dec 13, 2023 · IPR2023-00991 · APJ Jon B Tornquist · IPR · Institution

  The Board instituted review of claims 1 and 13–17 on all petition grounds, finding a reasonable likelihood of success on at least one challenge to claim 13 based on combinations involving Lee or Johnson.

  RulingsInstitution decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther

    “stackable add-on layer” requires something more than just any type of layer that is directly or indirectly adhered to the substrate or dielectric layer. First, the plain language of the claim does not require merely a “layer” having a plurality of vertically oriented semiconductor memory cells, but rather “a stackable add-on layer.” Ex. 1001, 12:29–32. Second, the written description of the ’702 patent strongly suggests that a “stackable add-on layer” is formed separately from the substrate and then stacked on and bonded to the substrate or a dielectric layer above the that in the invention “a plurality of vertically oriented semiconductor memory devices, or cells, may be added to a separately fabricated substrate that includes electrical devices and/or interconnect lines.” Id. at 1:47–50 (emphasis added). Likewise, the specification explains that an SOI layer refers to “a relatively thin, single crystal portion of a semiconductor wafer that can be cleaved and bonded to another previously fabricated wafer, or similar type of substrate.” Id. at 4:47–51. “In this context,” the ’702 patent explains, “the SOI layer may be thought of as an attachment layer, or stackable add-on structure which is suitable for bonding to a semiconductor substrate already containing devices and/or interconnections.” Id. at 4:53– 57. Again, this suggests that a “stackable add-on layer” is separately formed and then bonded to a previously fabricated substrate. Given the structure of the claims and the description of the invention in the written description of the ’702 patent, we preliminarily construe “stackable add-on layer” to be a layer that is formed separately from the substrate and then bonded to the substrate or a dielectric layer above the substrate. We do not understand a “stackable add-on layer” to include memory cells that are formed by sequential deposition on or above a substrate or dielectric layer without being added to a separately formed substrate. slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageTerm construed board ownOther

    “Independent claims 1 and 13 do not specify how the stackable add-on layer is bonded to the dielectric layer. Nor does Petitioner assert that the plain and ordinary meaning of “bonding” refers to “wafer bonding.” Thus, to limit the claims to wafer bonding, Petitioner must identify a clear expression of intent in the ’702 patent to define “bonding” as “wafer bonding,” or a clear disavowal of claim scope demonstrating that non-wafer bonding methods are outside the reach of the claims. See Thorner v. Sony Comp. Entm’t Am. LLC, 669 F.3d 1362, 1365 (Fed. Cir. 2012). Petitioner does not contend that the patentee acted as its own lexicographer by defining “bonding” as “wafer bonding,” a term that does not even appear in the ’702 patent. Id. at 1365. Nor are we directed to any clear disavowal indicating that methods of bonding other than “wafer bonding” are outside the scope of the claims. Id. at 1366. Thus, we decline to construe “bonded” in claims 1 8 Wafer bonding is a method in which semiconductor layers are formed on separate wafers and then bonded together to create a stacked semiconductor structure. Ex. 1003 ¶ 41. that the standards for lexicography and disavowal are “exacting”). As noted by Petitioner, the ’702 patent describes an SOI layer that is wafer bonded to a previously fabricated substrate. Ex. 1001, 4:47–53. Independent claims 1 and 13, however, do not require an SOI layer, and the disclosure of a single embodiment in which wafer bonding is used is not sufficient to import such a limitation into the claims. See Deere & Co. v. Bush Hog, LLC, 703 F.3d 1349, 1354 (Fed. Cir. 2012) (“While claim terms are understood in light of the specification, a claim construction must not import limitations from the specification into the claims.”); Computer Docking Station Corp. v. Dell, Inc., 519 F.3d 1366, 1374 (Fed. Cir. 2008) (“Nonetheless, this court will not countenance the importation of claim limitations from a few specification statements or figures into the claims.”). In summary, we preliminarily construe “stackable add-on layer . . . the first stackable add-on layer is/being bonded” to require a separate layer that is formed apart from the substrate and then subsequently bonded to the substrate or a dielectric layer above the substrate.9 We do not construe independent claims 1 or 13 to require any particular form or method of bonding.10” slip op. at 10

  • PTAB / AIA Trials › Discretionary denial › General Plastic (serial petitions)Decided for petitioner

    “The evidence of record demonstrates that Petitioner and Micron jointly developed the 3D NAND technology that is generally at issue in the district court litigation, and the parties have acknowledged “their long-term joint development partnership” for this technology. Ex. 1013 (district court complaint); Ex. 2010 (“Micron and Intel Extend their Leadership in 3D NAND Flash memory.”); Ex. 2016 (discussing the end of Intel’s and Micron’s NAND partnership). There is no assertion, however, that all 3D NAND technology infringes the challenged claims of the ’702 patent, and Micron and Intel are not accused of infringing the ’702 patent based on the same products and are not co-defendants in any district court litigation. Further, Patent Owner presents no persuasive evidence that the two parties collaborated on the development of either of the accused products, as opposed to general 3D NAND technology, and Petitioner represents that the two parties filed their petitions independently and without coordination or cooperation. Prelim. Reply 1–2; Ex. 2016, 1 (noting that each company sought to independently develop 3D NAND technology in order to “forge” their own path for future NAND development and “better optimize the technology and products for their individual business needs”). relationship between Petitioner and Micron, and Petitioner is not the same petitioner as the petitioner in IPR2023-00900. Thus, General Plastic factor 1 weighs against discretionary denial.” slip op. at 14

  • PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner

    “The stipulation filed in the Texas litigation mitigates, to an extent, concerns of potentially conflicting decisions and duplicative efforts between the district court and the PTAB.12 Director’s Memo at 7. Similarly, Petitioner’s stipulation in the Oregon litigation (i.e., that it will not pursue an invalidity defense that the claims challenged in this IPR proceeding are invalid based on grounds that were raised or reasonably could have been raised during the IPR) also mitigates concerns of potentially conflicting decisions and duplicative efforts. Patent Owner contends Petitioner’s stipulation falls short of a Sotera stipulation by carving out any circumstance that “otherwise terminate[s] the instituted IPR.” Prelim. Sur-reply 2–3. Patent Owner interprets this carve- on the patent application publication of the Lee patent. Ex. 1007. Because the disclosures of the Lee patent and patent application publication are substantively identical, we consider the stipulation not to pursue any obviousness ground based on Lee to apply with equal force to Lee’s patent application publication. 12 The stipulation in the Texas litigation bars the defendant from pursuing “any obviousness ground that includes” Lee or Watanabe. IPR2023-00900, Exhibit 1031. Here, Petitioner’s grounds 1A–1F challenge claims 13–17 based in whole or in part on Lee, and grounds 2A–2C and 3 challenge claims 1 and 13 based on combinations of references that do not include Lee or Watanabe. Pet. 3. As such, the grounds to be resolved by the PTAB will differ somewhat from those presented in the Texas litigation. written decision, thereby rendering the stipulation an “empty promise” as the district court in the Texas litigation will undoubtedly resolve validity before a final written decision in this case. Id. at 3. We disagree. We do not understand Petitioner’s stipulation to require that a final written decision be issued before the stipulation takes effect. Rather, so long as an inter partes review is instituted, and until such time as the IPR is terminated or vacated, Petitioner will not pursue any invalidity defense before the district court that is “based on grounds that were raised or could have been raised during the IPR.” Ex. 1034. In summary, given the stipulations filed by the petitioners in the Oregon and Texas litigations, it appears that there will be minimal, if any, overlap between the issues raised in the petitions and in the parallel district court proceedings. Accordingly, Fintiv factor 4 weighs against discretionary denial.” slip op. at 21

  Claim construction§ 103 obviousnessDiscretionary denial
  Patents in suitUS 7,378,702
• Micron Technology, Inc. / Micron Semiconductor Products, Inc. et al. v. Besang Inc.Instituted
  PTAB · Nov 17, 2023 · IPR2023-00900 · APJ Jon B Tornquist · IPR · Institution

  Instituted IPR on claims 13–17 on all petitioned grounds after finding a reasonable likelihood of prevailing on at least one obviousness challenge.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “review. 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2023). The standard for institution is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons set forth below, Petitioner demonstrates a reasonable likelihood of prevailing with respect to claims 13–17 of the ’702 patent. Accordingly, we institute an inter partes review.” slip op. at 2

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for petitioner

    “On this preliminary record, we agree with Petitioner that the intrinsic record does not support a construction of “stackable add-on layer” that encompasses formation of memory cells by sequential deposition on a plain language of the claim does not require merely a “layer” having a plurality of vertically oriented semiconductor memory cells, but rather “a stackable add-on layer” having a plurality of vertically oriented semiconductor memory cells that is bonded to the dielectric layer. Ex. 1001, 12:29–32. The written description of the ’702 patent strongly suggests that such “a stackable add-on layer” is formed separately from the substrate and then stacked on and bonded to the substrate. Id. at 1:47–50 (“Briefly, a plurality of vertically oriented semiconductor memory devices, or cells, may be added to a separately fabricated substrate that includes electrical devices and/or interconnect lines.” (emphasis added)). It is unclear how memory cells sequentially deposited on a substrate could be considered to be a plurality of memory devices “added to a separately fabricated substrate.”” slip op. at 7

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted

    “Petitioner contends one of ordinary skill in the art would have combined Watanabe and Lee because Watanabe discloses an alternate method of forming a memory device that is applicable to the memory devices of Lee and Watanabe, and Watanabe discloses that its “stacking method” improves the accuracy of the wiring and provides “a semiconductor memory device with improved integration density” and “low interconnection wire resistance.” Id. at 72.” slip op. at 24

  • PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied

    “3. Factor 3 – Investment in the parallel proceeding by the court and the parties Under the third Fintiv factor, we consider the “investment in the parallel proceeding by the court and the parties.” Fintiv, Paper 11 at 6. Petitioner contends that, at the time of the filing of the Petition, the court had not yet held a case management conference or set a Markman or trial date, and that no hearings or substantive activities or hearings have occurred in the case. Pet. 75. “Because the investment in the trial has been minimal and Petitioner acted diligently” in filing the Petition, Petitioner contends “this factor weighs strongly against discretionary denial.” Id. Patent Owner contends the co-pending district court case has been moving forward, with infringement and invalidity contentions being exchanged and discovery and deposition underway. Prelim. Resp. 34. Patent Owner further contends that by the institution deadline of November 28, 2023, the parties will be in the “home stretch of discovery.” Id. at 34– 35. “Based on the considerable resources already expended on contentions and discovery in the district court,” Patent Owner argues that Fintiv factor 3 weighs in favor of denying institution. Id. at 35. directed to no substantive rulings by the district court to suggest that it has invested considerable resources in the case. Nor are we presented with evidence that the parties have expended significant resources in the district court litigation. Fact discovery is not scheduled to be completed until July 1, 2024, and expert discovery is to be completed by August 5, 2024, i.e., more than seven months after the institution deadline. Ex. 2001, 3. Accordingly, we determine that Fintiv factor 3 weighs against discretionary denial of institution. 4. Factor 4 – Overlap between issues raised in the petition and in the parallel proceeding Under the fourth Fintiv factor, we consider the “overlap between issues raised in the petition and in the parallel proceeding.” Fintiv, Paper 11 at 6. Petitioner contends that in the district court litigation Patent Owner asserts infringement under only claim 13, whereas the Petition challenges claims 13–17. Pet. 76. Petitioner argues that because it is challenging more claims than are asserted in the district court litigation, this proceeding “is the only venue in which the invalidity challenges against several claims in the ’702 Patent will be adjudicated,” and this proceeding will promote efficiency because it “will resolve disputes against future district court defendants.” Id. Patent Owner responds that Petitioner’s “invalidity contentions challenge the same Claims 13–16 based on the identical Watanabe, Lee, and Endoh references relied upon in the Petition.” Prelim. Resp. 35. Petitioner responds that it has signed and served a stipulation “not to pursue in the parallel district court proceeding any obviousness ground that includes the primary references in the Petition.” Prelim. Reply 2. According to Petitioner, “[t]his stipulation mitigates concerns of potentially the PTAB.” Id. Patent Owner argues in response that Petitioner’s “meager agreement” slip op. at 30

  Claim construction§ 103 obviousnessDiscretionary denial
  Patents in suitUS 7,378,702
• Nespresso USA, Inc. v. K-Fee System GmbHInstituted
  PTAB · Sep 13, 2023 · IPR2023-00485 · APJ Jon B Tornquist · IPR · Institution

  Instituted IPR of claims 1–10 on all petition grounds; Petitioner showed a reasonable likelihood that the claims would have been obvious over Yoakim, Jarisch, Rossi, and Castellani.

  RulingsInstitution decision

  • Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner

    “second German priority application do not disclose every limitation of independent claims 1 and 7 of the ’430 patent. Figure 1 does not depict a barcode under the flange, but rather the use of raised areas on the side of the capsule that act as an identifier. Ex. 1047, Fig. 1. Figure 2, coupled with its associated description, might suggest that the barcode could be on the portion of the base element facing away from the membrane,9 but this figure does not disclose many of the other elements of the claim, including holding arms, a drop box, annular convexity and concavity, and a pump to supply water to the single-serve capsule. Pet. 41; Ex. 1047, 9:21–24, Fig. 2. We also determine that Patent Owner does not sufficiently demonstrate that Figures 16–18 of the second German priority application provide adequate disclosures showing that the inventors were in possession 9 We question whether the second German priority application supports placing a barcode under the flange. The application states that the barcode could “be provided on that side of the peripheral region of the basic element which is directed away from the membrane.” Ex. 1047, 9:21–24. This statement is rather ambiguous as to where the “peripheral region” is that is “directed away from the membrane.” The text goes on to explain, however, that “[t]his barcode,” i.e., the barcode that is “directed away from the membrane,” “is read by a detector 13,” which in Figure 2 is oriented to read a barcode on the top surface of the flange. Id. at 9:25–26, Fig. 2. This suggests that the barcode is not on the bottom side of the flange and that arrow 15 is pointing to the outer portion of the peripheral region that is not covered by the membrane, and not necessarily the bottom of the flange. First, the second German priority application describes the use of “an identifier” that is read by a “sensor/detection means” and then compared to a stored identifier. Ex. 1047, 2:29–31. In Figure 2 the identifier may be a barcode and the detection means is detector 13. Id. at 9:11–26. In Figures 16–18, however, element 2.4.2 is not an identifier, but rather a “a form-fitting and/or friction-fitting means and/or a detection means.” Id. at 12:22– 24 (emphasis added). As such, it is unclear how this disclosure would demonstrate possession of the disputed claim limitation, when combined with the other limitations of claims 1 and 7 as a whole. Second, it is not evident that the toothed rings of Figures 16–18 are on the underside of the flange, as asserted by Patent Owner. Prelim. Resp. 42 (asserting that a barcode “could be located on the bottom side of the flange instead of the toothed ring”); Prelim. Sur-reply 4. The second German priority application states that the “form-fitting and/or friction-fitting means and/or detection means 2.4.2” is located in the “outer region” of the peripheral region 2.4. Ex. 1047, 12:22–24. We are directed to no evidence that this “outer region” is on the bottom of the flange, and Figures 16–18 each appear to depict means 2.4.2 on, or forming, the outer circumference of the flange.11 Id. at Figs. 16–18, 6:8–11 (noting that the toothed ring is provided “on the outer circumference of the periphery”). 10 The parties dispute whether Figure 16 of the second German priority application discloses annular convexity and concavity. Pet. 42–43; Prelim. Resp. 45–46; Prelim. Reply 4–5; Prelim. Sur-reply 4. At most, the parties identify a material issue of fact with respect to these two claim elements that is best resolved on a full trial record. 11 At first blush, Figure 17A appears to show means 2.4.2 under a portion of element 27 of the capsule. Ex. 1047, Fig. 17A; Prelim. Sur-reply 4 depicted in Figures 16–18, which rely on toothed rings physically interacting with either the chamber, retaining arms, or a pinion. Ex. 1047, 12:22–31, 13:8–18. The second German priority application explains that means 2.4.2 physically interacts with retaining arms 30 (embodiments of Figures 16 and 17) or a pinon (embodiment of Figure 18), and if means 2.4.2 were not present in these embodiments, the capsule would either “drop through into a waste container” or could not be inserted through the insertion shaft. Id. at 12:22–27, 13:9–12, 13:16–35 (noting that in the embodiment disclosed in Figure 18 a pinon interacts with means 2.4.2 and only when means 2.4.2 “is formed complementary to the teeth of the means” can the capsule be inserted). Patent Owner does not sufficiently explain how a barcode could replace means 2.4.2 in these embodiments and still retain the capsule within the device or allow the capsule to enter the insertion shaft.” slip op. at 14

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted

    “First, Yoakim expressly states that the capsule may use a “barcode,” and the plain and ordinary meaning of this term is a code that satisfies the construction adopted by the district court. To the extent Patent Owner has reason to believe that Yoakim does not apply the plain and ordinary meaning of the term “barcode,” and that one of ordinary skill in the art would have understood this fact, it is encouraged to present such evidence during trial. Second, in this obviousness inquiry the question is not whether a person of ordinary skill in the art is more likely to adopt a barcode or a bitcode, but whether one of ordinary skill in the art would have seen a benefit to applying the “barcode” of Yoakim under the flange of the capsule. See Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 800 (Fed. Cir. 2021) (“Our case law is clear. It’s not necessary to show that a combination is ‘the best option, only that it is a suitable option.’”). On that point, Jarisch expressly discloses the benefits of doing so. Ex. 1005 ¶ 22 (noting that applying the code at the bottom of the rim lowers the risk of the code becoming unreadable). As such, we determine that Petitioner sufficiently identifies where Yoakim discloses a barcode and explains why one of ordinary skill in the art would have placed such a “barcode” on the bottom of the capsule’s flange.” slip op. at 27

  • PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDecided for petitioner

    “Information Disclosure Statement (IDS) during prosecution of the ’430 patent and that Rossi and Castellani were mentioned in the inter partes reviews that were cited on the IDS. Pet. 19; Prelim. Resp. 23. We need not determine whether Part 1 of the Advanced Bionics framework is satisfied based on these disclosures, however, as Part 2 of the analysis, which we address below, is dispositive. a) Factor (c)—the extent to which the asserted art was evaluated during examination, including whether the prior art was the basis for a rejection The Examiner did not issue any rejections during prosecution of the ’430 patent. Ex. 1002, 232–234. As the reasons for allowance, the Examiner stated: [A]llowance of claims 1 and 21–29 is indicated as none of the cited prior art discloses or suggests the flange comprising a top side and an opposing bottom side; a cover that is fastened to the top side of the flange to close the cavity; and an identifier provided on the bottom side of the flange, the identifier being a barcode, wherein the beverage machine, by reading or detecting the identifier with the sensor/detector, is configured to determine if the single-serve capsule belongs to a group of single serve capsules operable for use with the beverage machine, and only if the beverage machine determines that the single-serve capsule belongs to the group of single serve capsules operable for use with the beverage machine is the pump controlled to push the water into the single-serve capsule. Id. at 233. In arriving at this conclusion, the Examiner did not cite or discuss the disclosures of Yoakim, Jarisch, Rossi, or Castellani. Id. at 232–234. Yet, these references appear, based on the current record, to expressly teach or allowance, including a “flange comprising a top side and an opposing bottom side” (Ex. 1004 ¶ 197, Fig. 6); “a cover that is fastened to the top side of the flange to close the cavity” (Ex. 1004 ¶¶ 128–129, 197, 414); “an identifier provided on the bottom side of the flange” (Ex. 1005 ¶ 22) that is “a barcode” (Ex. 1004 ¶¶ 496, 525); and “reading or detecting the identifier with the sensor/detector . . . to determine if the single-serve capsule belongs to a group of single serve capsules operable for use with the beverage machine” (Ex. 1004 ¶¶ 25, 192, 477, 494–496, 525; Ex. 1005 ¶ 82; Ex. 1041, 3, 11). As such, to the extent the asserted combination of prior art references was evaluated during prosecution of the application that matured into the ’430 patent, we determine that such evaluation was minimal.” slip op. at 37

  • Other 314aDecided for petitioner

    “B. 35 U.S.C. § 314(a) Patent Owner contends that “[t]he parties have been embroiled in disputes involving substantive claims for infringement for both the ’430 Patent and the Jarisch 929 reference,” and “it is unnecessary to open up yet another front in this dispute.” Prelim. Resp. 68–69. As such, Patent Owner requests that we deny institution under 35 U.S.C. § 314(a). Id. Patent Owner directs our attention to no case in which the Director has exercised discretion to deny a petition merely because the same patent was the subject of a co-pending district court infringement action. Indeed, 35 U.S.C. § 315(b) specifically contemplates such a scenario. Accordingly, we decline to exercise discretion to deny the Petition under 35 U.S.C. § 314(a).” slip op. at 40

  § 103 obviousness§ 112 disclosureDiscretionary denial
  Patents in suitUS 11,230,430
• Nespresso USA, Inc. v. K-Fee System GmbHInstituted
  PTAB · Sep 13, 2023 · IPR2023-00502 · APJ Grace Karaffa Obermann · IPR · Institution

  Instituted IPR on claims 1–16 because Petitioner showed a reasonable likelihood that the claims would have been obvious over Yoakim, Jarisch, and Rapparini.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “review. 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2022). The standard for institution is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least [one] of the claims challenged in the petition.” For the reasons set forth below, Petitioner demonstrates a reasonable likelihood of prevailing with respect to claims 1–16 of the ’923 patent. Accordingly, we institute an inter partes review.” slip op. at 2

  • Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner

    “benefit of the filing date of an earlier filed application only if the disclosure of the earlier application provides support for the claims of the later application, as required by 35 U.S.C. § 112.” In re Chu, 66 F.3d 292, 297 (Fed. Cir. 1995). One may show support for the claims of a later application by showing that a single, earlier application provides written description support for the claims. PowerOasis, Inc. v. T-Mobile USA, Inc., 522 F.3d 1299, 1306 (Fed. Cir. 2008); Studiengesellschaft Kohle, MBH v. Shell Oil Co., 112 F.3d 1561, 1564 (Fed. Cir. 1997) (noting that a patentee “cannot distinct previous applications”). Once Petitioner identifies a prior art reference with an effective filing date prior to that of the challenged patent, the burden of production to show entitlement to the benefit of the filing date of an earlier filed application shifts to Patent Owner. See In re NTP, 654 F.3d 1268, 1276 (Fed. Cir. 2011) (“a patent’s claims are not entitled to an earlier priority date merely because the patentee claims priority . . . Rather, for a patent’s claims to be entitled to an earlier priority date, the patentee must demonstrate that the claims meet the requirements of 35 U.S.C. § 120”). Patent Owner may show possession of the invention through “such descriptive means as words, structures, figures, diagrams, formulas, etc., that fully set forth the claimed invention.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997). “Although the exact terms need not be used in haec verba, . . . the specification must contain an equivalent description of the claimed subject matter. A description which renders obvious the invention for which an earlier filing date is sought is not sufficient.” Id.” slip op. at 9

  • Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportReference is prior artPriority date, deniedDecided for petitioner

    “Once Petitioner identifies a prior art reference with an effective filing date prior to that of the challenged patent, the burden of production to show entitlement to the benefit of the filing date of an earlier filed application shifts to Patent Owner. See In re NTP, 654 F.3d 1268, 1276 (Fed. Cir. 2011) (“a patent’s claims are not entitled to an earlier priority date merely because the patentee claims priority . . . Rather, for a patent’s claims to be entitled to an earlier priority date, the patentee must demonstrate that the claims meet the requirements of 35 U.S.C. § 120”). Patent Owner may show possession of the invention through “such descriptive means as words, structures, figures, diagrams, formulas, etc., that fully set forth the claimed invention.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997). “Although the exact terms need not be used in haec verba, . . . the specification must contain an equivalent description of the claimed subject matter. A description which renders obvious the invention for which an earlier filing date is sought is not sufficient.” Id.” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted

    “7. Analysis: Reasons to Combine the References Petitioner shows sufficiently that Yoakim, Jarisch and Rapparini are “analogous art in the field of portion capsule beverage extraction, each disclosing an invention that may be applied in automatic coffee/espresso machines.” Pet. 43. “Yoakim and Jarisch both improve the optimization of beverage parameters in a single-serve brewing system, and use optical codes read by the machine to achieve this.” Id. “Rapparini further improves the the wall of the capsule body like those used in Yoakim and Jarisch.” Id. at 43–44; see id. at 50–51, 53–54 (Petitioner’s further argument that Rapparini discloses “an optimized capsule structure that is stiffer and more stable” by virtue of radially spaced and vertically oriented ribs and grooves, where the vertically oriented grooves are free from extending entirely to the bottom region of the capsule). Petitioner directs us to additional evidence tending to establish that an ordinarily skilled artisan would have been prompted to modify Yoakim’s device, to include the code placement of Jarisch and the grooves and ribs of Rapparini, to arrive at the claimed invention with an expectation of success. Id. at 44–48.” slip op. at 27

  § 102 anticipation§ 103 obviousness§ 112 disclosureDiscretionary denialcites Phillips
  Patents in suitUS 10,994,923
• Chongqing Yanmei Technology Co., Ltd. v. Terves, LLCInstituted
  PTAB · Aug 30, 2023 · IPR2023-00521 · APJ Jon B Tornquist · IPR · Institution

  The Board instituted IPR on claims 19–61 and 63–81 on all petitioned grounds, finding a reasonable likelihood that Doud anticipates claims 19–61 and 63–75.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “review. 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2022). The standard for institution is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons set forth below, we determine that Petitioner demonstrates a reasonable likelihood of prevailing with respect to at least one claim of the ’740 patent. Accordingly, we grant institution of an inter partes review.” slip op. at 2

  • Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateOther

    “the application describe the claim limitations exactly,” the application must demonstrate to persons of ordinary skill in the art that the applicants invented a composition including those limitations. Wertheim, 541 F.2d at 262. On its face, the range of “at least 0.01 wt. %” encompasses a range that is broader than 0.01–35 wt. %, and Patent Owner does not sufficiently explain why a person of ordinary skill in the art would understand from merely a disclosure of 35 wt.% that the inventors were in possession of the entire claimed range for copper, cobalt, or nickel in the magnesium composition.” slip op. at 11

  • Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date, deniedOther

    “On this record, the term “at least 0.01 wt. %” in the ’740 patent encompasses values for nickel, copper, and cobalt that are higher than the 35 wt. % (nickel and copper) and 20 wt. % (cobalt) limits outlined in the parent and grandparent applications. Accordingly, we determine that there is a reasonable likelihood that claim 19 of the ’740 patent is not entitled to the benefit of the filing dates of its priority applications. Challenged claims 20–61 and 63–75 depend from claim 19 and there is no argument presented that these claims have independent written description support in Doud. For example, there is no evidence presented that any of these dependent claims narrow the ranges for each of copper, nickel, and cobalt recited in in the ’295 application for these claims.7 Accordingly, for purposes of this Decision, we apply Doud as prior art to challenged claims 19–61 and 63–75.” slip op. at 12

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted

    “as the ’740 patent. For example, Doud and the ’740 patent both disclose a method of forming a novel magnesium composite that includes melting an AZ91D magnesium alloy containing 90 wt. % magnesium, 9 wt. % aluminum, and 1 wt. % zinc. Ex. 1005 ¶¶ 45, 47; Ex. 1001, 21:43–51, 22:48–53, 33:32–43, 34:9–12. To this alloy is added either 7 wt. % nickel or 10 wt. % copper. Ex. 1005 ¶¶ 45, 47, 53, 57; Ex. 1001, 21:48–51, 22:53–56, 33:35–36, 34:12–13. These additives are mixed in the magnesium alloy at a temperature that is less than the melting point of copper or nickel, and the casting is then cooled. Ex. 1005 ¶¶ 45, 47, 53, 57; Ex. 1001, 21:51–54, 22:56–58, 33:35, 34:12-13. Doud reports that nickel and copper, when added to molten magnesium, will form Mg2Ni and CuMg2 intermetallic, galvanically-active, in situ precipitates. Ex. 1005 ¶¶ 12–13. Doud discloses that the dissolution rate of the resulting casting material is either 325 mg/cm2-hr (nickel) or 50 mg/cm2-hr (copper) in a 3% KCl solution at 90° C. Ex. 1005 ¶¶ 45, 47, 53, 57; Ex. 1001, 21:60–62, 22:61–63, 33:41–43, 34:15–17. Doud also discloses that the average particle diameter of the additives used in the invention is generally “at least about 0.1 microns” and “typically no more than about 500 microns.” Ex. 1005 ¶ 6. Petitioner explains how the identified disclosures of Doud anticipate independent claim 19. Pet. 39–40. Petitioner also identifies where the limitations of dependent claims 20–61 and 63–75 are disclosed in Doud. Id. at 41–45. Patent Owner does not address Petitioner’s anticipation arguments with respect to claims 19–61 and 63–75, apart from arguing that Doud is not prior art to these claims. Prelim. Resp. 27–39. demonstrates a reasonable likelihood that claims 19–61 and 63–75 are anticipated by Doud.” slip op. at 16

  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosureDiscretionary denial
  Patents in suitUS 10,689,740
• Samsung Electronics Co., Ltd. v. Lynk Labs, Inc.No claims unpatentable
  PTAB · May 25, 2023 · IPR2022-00101 · APJ Scott Raevsky · IPR · Final written decision

  Claims 1–7, 11, 12, and 14 were not shown unpatentable: the asserted obviousness combinations failed to establish required LED voltage matching or a clear, workable combination.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “We are persuaded that Patent Owner’s proposal is more consistent with the problems and solutions in the ’583 patent and prior art of record. We agree that Petitioner’s proposal is overbroad in that it encompasses artisans without LED circuit design experience (“and two or more years of experience with LED devices and/or related circuit design . . .” (emphasis added)). Patent Owner’s definition, in contrast, requires “two or more years of experience with LED devices and related LED circuit design.” We therefore adopt Patent Owner’s definition of the level of skill, but we note that the outcome here would not have changed had we adopted Petitioner’s level of skill.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner

    “preliminarily agreed with Patent Owner that “substrate” may mean “a surface where ‘LEDs, capacitors and/or resistors are formed or mounted.’” Pet. 7; Dec. 19 (quoting Prelim. Resp. 22). We instructed the parties to address the meaning of “substrate” more fully at trial. Dec. 19–20 n.13. Post-institution, the parties propose the following competing constructions for the term “substrate”:” slip op. at 8

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “(2) Our analysis We agree with Patent Owner. Patent Owner’s plain reading of limitation 1(c) is correct, and under this reading, the combination of Shackle and Birrell fails to disclose or suggest limitation 1(c). Limitation 1(c) states in part: “at least one LED circuit having any number of LEDs . . . needed to approximately match the forward voltage drop of a first input voltage to the LED driver.” Ex. 1001, 27:22–25 (emphasis added). We have omitted the language “connected in series or series parallel” to highlight the grammatical relationship between the noun phrase “any number of LEDs” and the verb phrase “needed to approximately match.” The plain reading of this limitation is that the at least one LED circuit has any number of LEDs needed to approximately match the forward voltage drop of the LED driver input. Petitioner’s reading, that “the at least one LED circuit,” rather than “any number of LEDs,” must approximately match the forward voltage drop of the LED driver input, is strained and not grammatically plausible. See Reply 1–3. Petitioner does not assert there is an express disclaimer or disavowal in the specification that supports its position; Petitioner instead relies on examples disclosed in the specification to support its faulty interpretation of limitation 1(c). See Reply 2–3. These arguments are unpersuasive. It is axiomatic that we must not “limit[] the claimed invention to preferred embodiments or specific examples in the specification.” Williamson v. Citrix Online, LLC, 792 F.3d 1339, 1346–47 (Fed. Cir. 2015). Not only that, but Petitioner’s citations to the specification better support Patent Owner’s position. In Petitioner’s view, the specification requires other non- LED components to be combined with one or more LEDs to “appropriately match the voltage.” Reply 2. The main example Petitioner relies on describes 38 LEDs having a total voltage drop of 114 V in a circuit with a bridge rectifier having a 6 V voltage drop. Id. at 2–3 (citing Ex. 1001, 16:64–17:7). Yet the 114 V voltage drop of the LEDs alone “approximately matches” the input voltage of 120 V, without the contribution of the bridge rectifier (6 V). Id. Indeed, 114 V out of 120 V is a 95% match. Thus, this example supports Patent Owner’s view that it is the voltage drop of the LEDs themselves, not the LED circuit as a whole, that must approximately match the LED driver input. See Sur-reply 6–7.” slip op. at 16

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “combination. The first is that the proposed combination is not at all clear. Although Petitioner need not propose a bodily incorporation of different embodiments, Petitioner must provide a “reasoned analysis” explaining what the combination is. See DSS Tech. Mgmt., Inc. v. Apple Inc., 885 F.3d 1367, 1377 (Fed. Cir. 2018); In re Keller, 642 F.2d 413, 425 (CCPA 1981); see also Kinetic Concepts, Inc. v. Smith & Nephew, Inc., 688 F.3d 1342, 1368 (Fed. Cir. 2012) (“We must be careful not to allow hindsight reconstruction of references to reach the claimed invention without any explanation as to how or why the references would be combined to produce the claimed invention.”) (citation omitted). But the Petition never explains how or where Piepgras’s glass substrate would be combined with Piepgras’s alleged flexible substrate, the rope light of Figure 31. At most, Petitioner suggests incorporating the illumination device 500 of Figure 42 in the rope light of Figure 31. Pet. 48 (“Piepgras provides for configurations where a reflective platform (reflective substrate) mounts lighting system 500 in a manner applicable generally to the inventions of Piepgras . . ., and thus including the rope lighting application discussed above.”). As for the glass substrate, Petitioner merely states that “a POSITA would have found it predictable to configure the Shackle-Piepgras device to implement a flexible substrate mounted to the glass substrate, wherein at least one of the plurality of LED packages is mounted to the flexible substrate.” Id. (citing Ex. 1002 ¶ 150). This vague statement just parrots the claim language and does not explain anything about how the glass substrate would be included in the combination.” slip op. at 28

  Patent outcomesUS 10,750,583 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,750,583
• Canon U.S.A., Inc. / Canon Inc. v. Slingshot Printing LLCInstitution denied
  PTAB · May 24, 2023 · IPR2022-01415 · APJ John D Hamann · IPR · Institution

  The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–10, 13, or 14 were unpatentable over any asserted ground.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “We have authority to determine whether to institute an inter partes review under 35 U.S.C. § 314 (2018) and 37 C.F.R. § 42.4(a) (2022). An inter partes review may be instituted if “the information presented in the petition filed under section 311 and any response filed under section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Upon consideration of the papers, we determine that the information presented in the Petition does not demonstrate a reasonable likelihood that Petitioner would prevail in establishing that at least one challenged claim is unpatentable. Accordingly, we deny the Petition and do not institute inter partes review.” slip op. at 2

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner argues that one of ordinary skill in the art at the time of the invention of the ’629 patent would have had “at least a Bachelor’s level college degree in Mechanical Engineering, Electrical Engineering, Physics, Computer Science or a related field, and at least two years of training or experience in the design of inkjet printheads.” Pet. 14–15 (citing Ex. 1007 ¶ 45). Patent Owner does not identify a level of skill in the art that one would have had at the time of the invention of the ’629 patent or identify any shortcoming in Petitioner’s formulation. See Prelim. Resp. 42–43. For purposes of this Decision on Institution, we adopt Petitioner’s definition of the level of skill for one of ordinary skill in the art, except we decline to adopt the recitals of “at least” as that language is vague and openended. Pet. 14–15. This definition is consistent with the ’629 patent and the asserted prior art, and we apply it in our analysis below.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “The parties both argue that we should construe “non-contiguous hybrid arrangement” to mean “[a]n arrangement in which the first set of logic cells are interleaved or interlaced with the second set of logic cells.” Pet. 15; Prelim. Resp. 43. Petitioner supports its argument by pointing to the claim construction order from the HP litigation, which provides this construction for this term. Pet. 15 (citing Ex. 1010, 4 (construing non-contiguous hybrid arrangement)). Patent Owner supports its argument by citing to the written description and figures of the ’629 patent. Prelim. Resp. 43–46 (citations omitted). For example, Patent Owner cites Figure 4 of the challenged patent, and its accompanying text, and argues that Figure 4 illustrates that the “logic cells [are] interleaved in a manner that minimizes the space between heater arrays by forming a single linear array.” Id. at 44 (citing Ex. 1001, Fig. 4). The accompanying text teaches that “the magenta logic cells 440a–n may be interleaved between the cyan logic cells 420a–n in an alternating manner to form a single, linear hybrid cyan/magenta P-logic array 302.” Ex. 1001, 5:67–6:4; Prelim. Resp. 45 (citing same). The ’629 patent adds that “[b]ecause of this interlacing of cyan P-registers 420a–n and magenta P-registers 440a–n, neither the cyan P-registers 420a–n nor the magenta P-registers 440a–n remain contiguous,” and that “[f]or example, in F[igure] 4, the cyan logic cell 420b is followed by the magenta logic cell 440a instead of the next cyan logic cell 420c.” Ex. 1001, 6:10–15; Prelim. Resp. 45 (citing same). We have reviewed the parties’ arguments, and we adopt the parties’ proposed construction for this term. In addition, we determine that no express construction is needed for any other term for us to render our Decision on Institution. See, e.g., Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’”).” slip op. at 9

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “However, we agree with Patent Owner that Hayasaki does not disclose that AND circuit array 5M’ and AND circuit array 5Y are arranged in a non-contiguous hybrid arrangement. Prelim. Resp. 51–52, 54–63. Rather, Hayasaki’s AND gates are arranged in a grid, with each magenta 6 Petitioner argues that “‘a first and a second set of logic cells’ is indefinite because it is unclear if this requires (i) a first set of logic cells and a second set of logic cells, (ii) first and second sets of logic cells, or (iii) a set of first logic cells and second logic cells.” Pet. 30 n.5. We disagree. The plain reading of this limitation corresponds to a first set of logic cells and a second set of logic cells, which is in accord with the interpretation Petitioner applies in this proceeding. Id. AND gate of AND circuit array 5M’ located directly aligned with the corresponding yellow AND gate of AND circuit array 5Y—they are not interleaved or interlaced. Ex. 1004, Fig. 9. Put differently, Hayasaki teaches that AND circuit array 5M’ and AND circuit array 5Y comprise two separate columns of logic cells that are not interleaved or interlaced. See Ex. 1004, Fig. 9, ¶ 93. Thus, Hayasaki does not teach sets of logic cells in a non-contiguous hybrid arrangement.” slip op. at 13

  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 7,559,629
• Canon U.S.A., Inc. / Canon Inc. v. Slingshot Printing LLCInstituted
  PTAB · May 22, 2023 · IPR2022-01541 · APJ Jon B Tornquist · IPR · Institution

  The Board instituted IPR on claims 1–7, 9, 10, 20–22, and 24 on all asserted grounds, finding a reasonable likelihood that at least one challenged claim would have been obvious.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “review. 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2022). The standard for institution is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons set forth below, Petitioner demonstrates a reasonable likelihood of prevailing with respect to claims 1–7, 9, 10, 20–22, and 24 of the ’951 patent. Accordingly, we institute an inter partes review with respect to all grounds asserted in the Petition. See SAS Inst. Inc. v. Iancu, 138 S.Ct. 1348, 1355 (2018).” slip op. at 2

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b).” 37 C.F.R. § 42.100(b). Under that standard, the words of a claim are generally given their “ordinary and customary meaning,” which is the meaning the term would have had to a person of ordinary skill at the time of the invention, in the context of the entire patent including the specification. Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc). Neither party asserts that any claim terms of the ’951 patent require construction. See Pet. 7; Prelim. Resp. 18–19. And, upon review of the parties’ arguments and supporting evidence, we find that no terms require construction for purposes of this Decision. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 6

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
  • Expert testimonyPetitioner expert creditedDecided for petitioner

    “arrangement,” allowing for an increased density of dots to be formed on the recording paper. Ex. 1007 ¶¶ 10–12, 17. One aspect of the “ink ejection parts” is the row of nozzles 22. Id. ¶¶ 17–18, 43, Fig. 1. In light of these disclosures, Mr. Curley testifies that one of ordinary skill in the art would have understood that the nozzles of Hamafuku are arranged in a row at “high density,” which was considered to be 600 dpi or higher in the relevant time period. Ex. 1002 ¶¶ 321–323. We find this testimony sufficient to present, at a minimum, a material issue of fact as to whether Hamafuku teaches or suggests nozzles that are spaced apart with a pitch ranging from about 600 to about 2400 dpi, as recited in claim 1. declaration are not persuasive. The Petition clearly details why Petitioner contends one of ordinary skill in the art would have understood Hamafuku to teach or suggest a nozzle pitch of between about 600 and 2400 dpi. Pet. 67– 69. The Petition supports this conclusion with citation to prior art references and Mr. Curley’s declaration testimony. Id. In his declaration, Mr. Curley supports his conclusions with respect to the “high density” disclosure of Hamafuku with specific references to the same prior art disclosures that are cited in the Petition. Ex. 1002 ¶¶ 318–323; Pet. 68 (both citing to disclosures in Exhibit 1008 and Exhibit 1025). We find this approach is appropriate. As noted by Patent Owner, Mr. Curley’s declaration spans over two hundred pages and contains a more extensive discussion of the prior art and the knowledge of one of ordinary skill in the art in the relevant time period. A declaration containing an in-depth discussion of the background of the relevant art, as well as a more complete analysis of the relevant prior art disclosures, is often more persuasive than a declaration that merely parrots the Petition, or vice versa, as it not only assists the panel in understanding the relevant technology, but also tends to demonstrate the declarant’s knowledge in the relevant field and his or her depth of analysis pertaining to the issues at hand. Of course, this extended analysis may not be incorporated-by-reference wholesale into a petition, but we discern no attempt to do so here, at least with respect to the nozzle pitch limitation disputed by the parties at this stage of the proceeding.” slip op. at 21

  Claim construction§ 103 obviousness
  Patents in suitUS 7,152,951

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.