- Mastercard Incorporated / Mastercard International Incorporated v. Ov Loop, Inc.All claims unpatentablePTAB · Aug 7, 2025 · IPR2023-01289 · APJ James A Tartal · IPR · Remand
On remand, the Board maintained that claims 1–33 are unpatentable as obvious over Collinge, including claims 10–13 and 27–30.
RulingsRemand decision- RemandDecided for petitioner
“Decision which components of Collinge “the Board relied on for claim 10’s limitation ‘receiving [at the remote computer system] an authorization request to authorize the transaction from the POS terminal.’” Remand Order 3. The Order instructs: “[o]n remand, the Board shall consider Patent Owner’s arguments as to claims 10 and 27, and their dependent claims. Regardless of the Board’s disposition on remand, the Board should address Patent Owner’s arguments and explain more fully its findings as to claims 10 and 27.” Id. The Remand Order further states that “this case is remanded to the Board for consideration of the arguments made in Patent Owner’s DR Request” and that we “should point more specifically to where in Collinge the argued limitation is taught, if anywhere, and which components of Collinge satisfy the limitation, if any.” Id. As instructed, in this Decision we consider Patent Owner’s arguments raised in the DR Request as to claims 10 and 27, and their dependent claims.3 As explained in detail below, and consistent with our determination in the Final Written Decision, we conclude Petitioner establishes by 3 We consider the arguments presented in Patent Owner’s DR Request in the context of arguments presented in Patent Owner’s Response, as arguments on the merits may be considered waived unless presented in that Response. See Paper 16, 9 (explaining that “Patent Owner is cautioned that any arguments not raised in the response may be deemed waived”). a preponderance of the evidence that the subject matter of claims 10–13 and 27–30 of the ’171 patent would have been obvious over Collinge.4” slip op. at 3
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable
“Ex. 1011 ¶ 77. In short, although paragraph 77 of Collinge is cited in the Petition and addresses both issuer processing server 308 and acquirer processing server 312, Petitioner relies on and shows that issuer processing server 308 (not acquirer processing server 312) receives “an authorization request to authorize the transaction from the POS terminal,” as required by claim 10. Pet. 58–59; Pet. Reply 16–18; DR Req. Opp. 2–4. Furthermore, there is no dispute that in Collinge the “authorization process” is performed at issuer processing server 308 in response to a request it receives. Ex. 1011 ¶ 77 (“The issuer processing server 308 may then validate the application cryptogram”). Claim 10 requires “performing an authorization process” including “receiving an authorization request to authorize the transaction from the POS terminal” at the remote computer system. We recognize that acquirer processing server 312 facilitates receiving transaction information from the POS terminal and communicating an authorization request to the issuer processing server 308. See Ex. 1011 ¶ 77. It is merchant point-of-sale terminal 120, however, that transmits “the received payment information and any additional transaction information (e.g., transaction amount, merchant identifier, etc.) to the acquirer processing server 312,” so that “acquirer processing server 312 may then generate and submit an authorization request for the financial transaction” through payment network 124 to issuer processing server 308 for validation. Id. Thus, Petitioner shows that in Collinge the request received by the issuer processing server 308 is “from” the POS terminal, as required by claim 10. See Pet. 58–6-; Ex. 1011, ¶ 77, Fig. 7.” slip op. at 20
- Expert testimonyPetitioner expert creditedDecided for petitioner
“’095 Provisional, reproduced above). Reply 17–18 (citing Ex. 1009 ¶ 46, Fig. 7). We credit Dr. Fiske in this regard, who explains that “the functionality performed” in the components in the “Blue-Box Structures,” that is Collinge’s Cloud Systema and Issuer System, “share a ‘connection 178’ therebetween,” as shown in Figure 7 of the ’095 Provisional. Ex. 1050 ¶ 43. We also considered Dr. Easttom’s opinion that Collinge’s Cloud System 110 and Issuer System 108 (see Ex. 1011, Fig. 7) are not one computer system because, in his view, each item “is (one or more) separate systems that operated independently from the others.” Ex. 2009 ¶ 150; see also PO Resp. 36–37 (arguing that Petitioner presents “no evidence” to show that allegedly “distinct” components are part of one remote computer system). We find Dr. Easttom’s opinion untenable because it is contrary to the express disclosure of Collinge, which demonstrates that, rather than operating “independently,” Cloud System 110 and Issuer System 108, and specifically remote-SE system 110 and issuer processing server 308, are connected and operate together through that connection, remotely from the mobile device. The Final Written Decision expressly agrees with and adopts Petitioner’s contentions with regard to claim 10, and we maintain that position here. See FWD 56–59.” slip op. at 26
Patent outcomesUS 10,032,171 unpatentable§ 103 obviousnessPatents in suitUS 10,032,171 - Geneoscopy, Inc. v. Exact Sciences CorporationAll claims unpatentablePTAB · Jul 9, 2025 · IPR2024-00459 · APJ Ryan H Flax · IPR · Final written decision
Claims 1–20 are unpatentable as obvious under § 103 over each of the six asserted grounds.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“Here, as in our Institution Decision, we do not discern a significant difference between the parties’ respective proposed definitions beyond the number of years of experience after obtaining a doctoral degree. Compare Pet. 12, with Prelim. Resp. 47, and Resp. 19–20; see also DI 7–8. Under either proposed definition, the ordinarily skilled artisan would have been very highly skilled and educated. For purposes of this Final Decision, we maintain that Patent Owner’s definition appears to be reasonable (and it falls between Petitioner’s two definitions asserted in the reexamination request and in the Petition). Further, Patent Owner’s proposed definition appears to comport with the level of skill in the art reflected in the prior art of record and the ’781 patent itself, for example, Vilkin’s authors are a group of medical doctors and an editor of the journal is a PhD, Joost Louwagie, the named inventor of the ’781 patent, holds a PhD in Biochemistry, and the authors of Itzkowitz are medical doctors and PhDs. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“[T]he prior art itself [may] reflect[] an appropriate level” as evidence of the ordinary level of skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)); see Ex. 1005, 3 (list of authors); Ex. 1016 (Dr. Louwagie profile); Ex. 1055; see also generally Reply (Petitioner did not contest our similar determination at Institution). Therefore, we adopt and use Patent Owner’s definition of the ordinarily skilled artisan, set forth above. C.” slip op. at 13
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner asserts that no claim construction is necessary in this proceeding. See generally Pet. Similarly, Patent Owner states that it “does not believe that claim construction is necessary to resolve patentability” in this proceeding. Resp. 21. “[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). We agree with the parties that no construction of any claim term is necessary for purposes of our Final Decision. D.” slip op. at 14
- Expert testimonyOther
“Pet. 12. In support of these grounds for unpatentability, Petitioner relies on, inter alia, the 1st and 2nd Declarations of Duncan Whitney, PhD. Ex. 1002; Ex. 1080. In support of its positions, Patent Owner relies on, inter alia, the 1st and 2nd Declarations of Vadim Backman, PhD, and the Declaration of Peter Wood. Ex. 2001; Ex. 2022; Ex. 2023.” slip op. at 10
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“We have no reasonable doubt that aspects of the Cologuard product practice the invention of the ’781 patent’s claims 1 and 3, which are most generally directed to steps of collecting two portions of a fecal sample at home, and combining a respective buffer stabilizer/preservative with each of the two portions for claim 1, and then processing those fecal samples by testing for blood and nucleic acids (e.g., DNA) for claim 3. These appear to be nearly the most basic steps for using the Cologuard kit. See generally Ex. 2032. And, these steps do illustrate a certain ease of use and consumerfriendliness that may be a contributing factor in Cologuard’s success. See, e.g., Ex. 2022 ¶¶ 140–142, 155, 158–159, 170–171.” slip op. at 25
Patent outcomesUS 11,634,781 unpatentableClaim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,634,781 - Valve Corporation v. Immersion CorporationAll claims unpatentablePTAB · Jun 12, 2025 · IPR2024-00477 · APJ Scott Raevsky · IPR · Final written decision
Claims 1–7 are unpatentable as anticipated by and obvious over Komata; the Board did not reach the Tsuji or Rosenberg grounds.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner contends that a POSITA would have had a bachelor’s degree in electrical engineering or computer science (or an equivalent degree), and two years of practical or industry experience in the field of human computer interaction (HCI), including implementation of computer-based systems and software for providing haptic feedback effects to a user. . . . Also, a person could have qualified as a [POSITA] with more formal education and less practical or industry experience, or vice versa. PO Resp. 17–18 (citing Ex. 2008 ¶ 17). Although these level of skill definitions are not the same, the differences are minor, and Patent Owner does not argue that its level of skill definition is dispositive. To the contrary, Patent Owner asserts that “[i]n any event, the challenged claims of the ’260 Patent are patentable under either . . . definition.” Id. at 18. We apply Petitioner’s level of skill but would have reached the same result had we applied Patent Owner’s.” slip op. at 6
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner
“As we explained in our Institution Decision, we disagreed then, and still disagree, “that the second pressure must be detected after the first pressure is detected (or that the third pressure must be detected after the first pressure is detected) simply because the second pressure is greater than the first pressure (and the third pressure is greater than the second pressure).” Dec. 27. As we explained there, “[t]he claimed relative magnitudes of the first, second, and third pressures do not define any temporal relationships regarding the detection of the pressures.” Id. We agree with Petitioner that claim 1 recites quantitative relationships for the pressures, not temporal relationships. Reply 4. For example, claim 1 requires “the second pressure greater than the first pressure” but says nothing about when the second pressure must be greater than the first pressure. A key misconception undergirding Patent Owner’s argument is its statement that “a ‘first pressure’ must first exist before the invention can detect that the ‘second pressure’ is greater.” PO Resp. 27 (emphasis added). The claim does not require detecting that the second pressure is greater than the first pressure. Limitation [1c] simply says, “detect a second pressure on the first input device, the second pressure greater than the first pressure.” In other words, all the detection that this limitation requires is detecting a second pressure. The claim then observes that the second pressure is greater than the first pressure but does not require detecting this. Limitation [1e] similarly detects pressure but not the comparison: “detect a third pressure on the first input device, the third pressure greater than the second pressure.” Thus, it does not follow that “a ‘first pressure’ must first exist before the invention can detect that the ‘second pressure’ is greater.” See id. Accordingly, we determine that Patent Owner’s analysis of the claim language is unpersuasive.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Our decision here does not depend on the meaning of this term. Patent Owner only argues the phrase “tactile sensation” for Petitioner’s challenge over Rosenberg, which we do not reach because Petitioner’s challenge over Komata is dispositive. See PO Resp. 63–66. Accordingly, we do not construe this term.” slip op. at 13
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“that Komata discloses all the limitations of claim 1. Patent Owner does not dispute that Komata discloses all the limitations of claim 1. Instead, Patent Owner disputes that Komata discloses the order of all the steps of claim 1, based on its construction requiring the steps to be performed in order. PO Resp. 50–54; Reply 17 (observing that Patent Owner “does not dispute that Ground 1 demonstrates how Komata anticipates or renders obvious claims 1–7 if [Patent Owner’s] ordered-steps argument is rejected”); Sur-reply 12–14 (not disputing the Reply’s observation). As Patent Owner’s argument relies on a claim construction we have not adopted, Patent Owner fails to undermine Petitioner’s persuasive showing.7 To the extent, as we note above, that the claims may require a partial ordering (i.e., limitation [1a] preceding limitation [1b] and limitation [1c] preceding limitation [1d], see supra Section I.A.1.a), Petitioner has persuasively shown that Komata discloses such ordering. a. Summary as to Claim 1 For the above reasons, Petitioner has shown by a preponderance of the evidence that claim 1 is anticipated by and would have been obvious over Komata. 3. Dependent Claims 2–7 Petitioner also contends that claims 2–7 would have been obvious over Komata. Pet. 28–35. Patent Owner does not dispute these dependent claims. Petitioner provides detailed explanations indicating where Komata teaches or suggests the limitations of claims 2–7, supported by Mr. Ward’s testimony. Id. We determine that Petitioner has shown by a preponderance of the evidence that claims 2–7 are anticipated by and would have been obvious over Komata.” slip op. at 17
Patent outcomesUS 7,336,260 unpatentableClaim construction§ 102 anticipation§ 103 obviousnessPatents in suitUS 7,336,260 - Valve Corporation v. Immersion CorporationAll claims unpatentablePTAB · Jun 12, 2025 · IPR2024-00478 · APJ Scott Raevsky · IPR · Final written decision
Claims 1–19 are unpatentable because Petitioner proved that Rosenberg I anticipates them.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“would have a bachelor’s degree in electrical engineering, computer science, or a related field, plus at least two years of industry or graduate level experience with software engineering, haptics programming, and/or human-computer interaction, including experience with user-interfaces and applications involving touchscreens, touchpads, and related technologies.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“feedback that simulates a mechanical detent.” PO Resp. 28; Sur-reply 3. Petitioner “does not explicitly disagree” that a virtual detent is “vibrotactile feedback that simulates a mechanical detent.” Reply 2. Petitioner asserts that “[i]f there is a dispute, it is whether Rosenberg I’s vibrotactile feedback ‘simulates a mechanical detent’ because [Patent Owner] says such simulation requires a sense of mechanical resistance and Rosenberg I allegedly lacks such simulated resistance.” Id. (citing PO Resp. 58–59).” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner
“To the extent Patent Owner urges us to require virtual detents to vary on a system or application basis, we do not find this interpretation required by the claims or specification either. Although the claims refer to “a plurality of systems,” they do not recite different detent profiles for each of those systems. Claim 1, for example, recites “receiving a detent profile associated with one of the systems.” The other claims are similar. Patent Owner’s reliance on non-limiting specification language is also unavailing. E.g., Ex. 1001, 8:38–46 (“can” and “may”), 4:30–44 (“embodiment” and “may”).” slip op. at 13
- Claim Construction › Intrinsic evidence (Phillips canons) › Preamble limiting or notPreamble not limitingDecided for petitioner
“supports its proposed construction. See PO Resp. 32. Patent Owner argues that claim 15 recites a “system comprising” “an input device configured to control one of a plurality of systems,” and hence “the recited plurality of systems are subsystems in addition to the containing system.” Id. We question how this point supports Patent Owner’s proposal because this does not address why each system must “provide[] context for virtual detents.” But regardless, we find it unpersuasive because claim 15’s preamble is not limiting (merely reciting “A system comprising”). See Summit 6, LLC v. Samsung Elecs. Co., 802 F.3d 1283, 1292 (Fed. Cir. 2015) (“[P]reamble language that merely states the purpose or intended use of an invention is generally not treated as limiting the scope of the claim.”); see also Tr. 80:4– 8 (Patent Owner conceding that the preamble is non-limiting). Nor is there any explicit language in claim 15 that would exclude any particular system, such as the system recited in the preamble, from the recited “plurality of systems.”” slip op. at 9
Patent outcomesUS 9,430,042 unpatentableClaim construction§ 102 anticipationPatents in suitUS 9,430,042 - PTAB · Jun 3, 2025 · IPR2025-00054 · APJ John G New · IPR · Institution
The Board instituted inter partes review of claims 1–16 on all petitioned grounds, finding a reasonable likelihood that claim 1 is obvious over Dohil.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Analysis After considering the as-yet uncontested evidence and arguments presented in the Petition, we determine that Petitioner has demonstrated a reasonable likelihood of success at trial in proving that at least one challenged claim of the ’828 patent is unpatentable. In particular, because Petitioner has demonstrated a reasonable likelihood that at least claim 1 is rendered obvious over Dohil in view of the understanding of a person of ordinary skill in the art, as argued in Ground 1, we institute inter partes review with respect to claim 1. Furthermore, because we determine that Petitioner has demonstrated a reasonable likelihood of success at trial in showing that at least one claim is unpatentable on at least one of the stated Grounds, we institute inter partes review of all challenged claims of the ’828 patent, based on all of the grounds identified in the Petition. See 37 C.F.R. § 42.208(a); SAS Inst., Inc. v. Iancu, 584 U.S. 357, 371 (2018); PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (interpreting the statute to require “a simple yesor-no institution choice respecting a petition, embracing all challenges included in the petition”)” slip op. at 16
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We determine that no express construction of any claim term beyond the definitions provided by the Specification and, in the absence of such definitions, the ordinary and customary meaning, as understood by a person of ordinary skill in the art at the time of the invention, is necessary for the purpose of rendering this Decision. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Matal, 868 F.3d 1013, 1017 (Fed. Cir. 2017); see also Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms … that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 6
- Skill levelSkill level petitioner adoptedDecided for petitioner
“appears to be consistent with the level of skill presented in the cited prior art. See, e.g., Exs. 1004–1007; see also Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art itself may reflect an appropriate level of skill in the art). However, at this point we reject the portion of Petitioner’s proposed definition that includes having “access to a medical doctor with a specialty in gastroenterology, and other individuals with expertise related to the above subjects,” as not reflecting the individual level of skill of a given skilled artisan. See Custom Accessories, Inc. v. Jeffrey-Allan Indus., Inc., 807 F.2d 955, 962 (Fed. Cir. 1986) (holding that “[t]he person of ordinary skill is a hypothetical person who is presumed to be aware of all the pertinent prior art. The actual inventor’s skill is not determinative”) (emphasis added, footnotes omitted). For the purposes of this Decision, we adopt Petitioner’s proposed definition as defining a person of ordinary skill in the art as a person who would have had: [A] Ph.D., another advanced degree, or its equivalent, in areas related to pharmaceutics, chemistry, biology, medicine, or a related discipline, and 2–3 years of experience in formulation development. Alternatively, a POSA would have a lesser degree in those fields, with at least five or more years of experience in formulation development.” slip op. at 7
Claim constructioncites Phillips · KSRPatents in suitUS 11,246,828 - PTAB · Jun 3, 2025 · IPR2025-00052 · APJ John G New · IPR · Institution
The Board instituted inter partes review of claims 1–17 on all petitioned grounds, finding a reasonable likelihood that claim 1 is obvious over Dohil in view of ordinary skill.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Analysis After considering the as-yet uncontested evidence and arguments presented in the Petition, we determine that Petitioner has demonstrated a reasonable likelihood of success in proving at trial that at least one challenged claim of the ’069 patent is unpatentable. In particular, because Petitioner has demonstrated a reasonable likelihood that at least claim 1 is rendered obvious over Dohil in view of the understanding of a person of ordinary skill in the art, as argued in Ground 1, we institute inter partes review with respect to claim 1. Furthermore, because we determine that Petitioner has demonstrated a reasonable likelihood of success at trial in showing that at least one claim is unpatentable on at least one of the stated Grounds, we institute inter partes review of all challenged claims of the ’069 patent, based on all of the remaining grounds identified in the Petition. See 37 C.F.R. § 42.208(a); SAS Inst., Inc. v. Iancu, 584 U.S. 357, 371 (2018); PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (interpreting the statute to require “a simple yes-or-no institution choice respecting a petition, embracing all challenges included in the petition”)” slip op. at 16
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner’s proposed definition of the level of ordinary skill in the art appears to be consistent with the level of skill presented in the cited prior art. See, e.g., Exs. 1004–1007; see also Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art itself may reflect an appropriate level of skill in the art). However, at this point we reject the portion of Petitioner’s proposed definition that includes having “access to a medical doctor with a specialty in gastroenterology, and other individuals with expertise related to the above subjects,” as not reflecting the individual level of skill of a given skilled artisan. See Custom Accessories, Inc. v. Jeffrey-Allan Indus., Inc., 807 F.2d 955, 962 (Fed. Cir. 1986) (holding that “[t]he person of ordinary skill is a hypothetical person who is presumed to be aware of all the pertinent prior art. The actual inventor’s skill is not determinative”) (emphasis added, footnotes omitted). For the purposes of this Decision, we adopt Petitioner’s proposed definition as defining a person of ordinary skill in the art as a person who would have had: [A] Ph.D., another advanced degree, or its equivalent, in areas related to pharmaceutics, chemistry, biology, medicine, or a related discipline, and 2–3 years of experience in formulation development. Alternatively, a POSA would have a lesser degree in those fields, with at least five or more years of experience in formulation development.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We determine that no express construction of any claim term beyond the definitions provided by the Specification and, in the absence of such definitions, the ordinary and customary meaning, as understood by a person of ordinary skill in the art at the time of the invention, is necessary for the purpose of rendering this Decision. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Matal, 868 F.3d 1013, 1017 (Fed. Cir. 2017); see also Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms … that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 6
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“Petitioner argues that it would have been obvious to a person of ordinary skill in the art to formulate Dohil’s rapidly dissolving lozenge or tablet to disintegrate within 60 seconds when tested using the USP <701> Disintegration Test. Pet. 26. According to Petitioner, the knowledge of those of skill in the art is represented by, for example, the FDA’s Guidance for Industry on ODTs. Id. Petitioner points out that the FDA Guidance explains that ODTs “disintegrate[] rapidly, usually within a matter of seconds.” Id. (quoting Ex. 1005, 2). Petitioner also notes that the FDA recommends that ODTs have “an in-vitro disintegration time of approximately 30 seconds or less, when based on the United States Pharmacopeia (USP) disintegration test method or alternative (see section IV).” Id. (quoting Ex. 1005, 2). Petitioner argues that the FDA Guidance further “recommend[s] that applicants use the USP method for disintegration testing,” specifically “USP 29, <701> Disintegration.” Id. (citing Ex. 1005, 3 n.3). Petitioner argues that a skilled artisan would have been motivated to follow the FDA Guidance in formulating Dohil’s rapidly dissolving lozenge or tablet containing budesonide. Pet. 26. Petitioner contends that the FDA Guidance provides the agency’s thinking and recommendations on the topic of orally dissolving tablets. Id. (citing Ex. 1005, 1). Petitioner argues that the FDA regulates the use of pharmaceutical compositions in the United States, and that Dohil’s formulations were intended to “be used in therapy for human patients,” and the initial testing of its formulations was conducted within the United States. Id. at 26–27 (citing Ex. 1002 ¶¶ 28, 49). Petitioner contends that a person of ordinary skill in the art, seeking to formulate budesonide into an orally disintegrating tablet, would have been motivated to follow the FDA Guidance that such a tablet should disintegrate within 30 seconds or less when tested using the USP <701> Disintegration Test. Id. (citing Ex. 1050 ¶¶ 134–135; also citing Allergan, Inc. v. Sandoz Inc., 726 F.3d 1286, 1291–92 (Fed. Cir. 2013) (holding that “[t]he potential for FDA approval also may properly be considered, as it was here, in determining whether one of ordinary skill would be motivated to develop a drug product”).” slip op. at 14
Claim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 10,632,069 - PTAB · Jun 3, 2025 · IPR2025-00055 · APJ Zhenyu Yang · IPR · Institution
The Board instituted IPR on claims 1–42 on all asserted grounds, finding a reasonable likelihood that Dohil renders claim 35 obvious.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“On this record and for purposes of institution, we find Petitioner’s analysis persuasive and adopt it as our own. Thus, we find Petitioner has established a reasonable likelihood of prevailing on its assertion that Dohil renders claim 35 obvious. We thus institute an inter partes review as to all challenges raised in the Petition. See SAS Institute, Inc. v. Iancu, 584 U.S. 357, 365–71 (2018); see also 37 C.F.R. § 42.108(a) (“When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.”).” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed petitioner constructionDecided for petitioner
“Petitioner notes that the ’407 patent defines (1) “orally disintegrating tablet,” “orally dispersing tablet,” or “ODT;” (2) “about;” and (3) “having no significant systemic glucocorticoid or mineralocorticoid activity.” Pet. 17–19 (citing Ex. 1001, 2:46–49; 2:62–3:3, 3:16–21). We adopt the express definitions of these terms as set forth in the ’407 patent Specification. See Multiform Dessicants, Inc. v. Medzam, Ltd., 133 F.3d 1473, 1478 (Fed. Cir. 1998) (“When the specification explains and defines a term used in the claims, without ambiguity or incompleteness, there is no need to search further for the meaning of the term.”).” slip op. at 6
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Claim terms need only be construed to the extent necessary to resolve the controversy. Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011). On this record and for purposes of this Decision, we see no need to expressly construe these or any other claim terms.” slip op. at 6
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“Petitioner contends that a POSA would have been motivated to follow the FDA Guidance (i.e., the guidance on the matter from the U.S. regulatory agency concerned with pharmaceuticals) in formulating Dohil’s rapidly dissolving lozenge or tablet containing budesonide. Id. at 25. According to Petitioner, a POSA seeking to formulate budesonide into an orally disintegrating pharmaceutical composition would have been motivated to follow the FDA Guidance that such a composition should disintegrate within thirty seconds or less when tested using the USP <701> Disintegration Test. Id. (citing Ex. 1053 ¶ 128). Petitioner also argues that a POSA would have had a reasonable expectation of success in doing so based on Dohil’s detailed description of how to formulate budesonide into a rapidly disintegrating lozenge or tablet. Id. (citing Ex. 1002 ¶¶ 27–41). According to Petitioner, formulating orally disintegrating tablets that dissolve within “several seconds to about a minute” would have been a routine exercise by 2009, the earliest possible priority date of the ’407 patent. Id. at 26 (citing Ex. 1005, 2; Ex. 1018, 434). Petitioner contends that, at that time, there were many orally disintegrating systems and products that were commercially available, which would have bolstered a POSA’s expectation of success. Id. (citing Ex. 1017, 179–181; Ex. 1018, 436–439; Ex. 1053 ¶ 129). Thus, Petitioner concludes that Dohil would have suggested to a POSA limitation 35[iv]. Id.” slip op. at 9
Claim construction§ 103 obviousnesscites PhillipsPatents in suitUS 9,486,407 - PTAB · Jun 3, 2025 · IPR2025-00056 · APJ Ryan H Flax · IPR · Institution
The Board instituted IPR on claims 1–30 and all three grounds, finding a reasonable likelihood that at least one claim would have been obvious over Perrett.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsInstitution denied 325dDenied
“In determining whether to deny institution under § 325(d), we use the following two-part framework: (1) whether the same or substantially the same art previously was presented to the Office or whether the same or substantially the same arguments previously were presented to the Office; and (2) if either condition of [the] first part of the framework is satisfied, whether the petitioner has demonstrated that the Office erred in a manner material to the patentability of challenged claims. Advanced Bionics, LLC v. MED-EL Elektromedizinische Geräte GmbH, IPR2019-01469, Paper 6 at 8 (PTAB Feb. 13, 2020) (precedential) (“Advanced Bionics”). The Becton, Dickinson factors provide useful insight into how to apply the framework under 35 U.S.C. § 325(d). Id. at 9 (referencing Becton, Dickinson & Co. v. B. Braun Melsungen AG, IPR2017-” slip op. at 8
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“An inter partes review may be instituted if the information presented by a petitioner in the petition, in view of the patent owner’s preliminary response and the preliminary record, shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least one of the claims challenged in the petition. 35 U.S.C. § 314.” slip op. at 19
- Skill levelSkill level petitioner adoptedDecided for petitioner
“A person of ordinary skill in the art (“POSA”) related to the ’061 patent would have a Ph.D., another advanced degree, or its equivalent, in areas related to pharmaceutics, chemistry, biology, medicine, or a related discipline, and 2-3 years of experience in formulation development. Alternatively, a POSA would have a lesser degree in those fields, with at least five or more years of experience in formulation development. The 8 See infra Section II.C. 9 At this stage of the proceeding, there is no evidence of objective indicia of obviousness or non-obviousness. POSA would also have had access to a medical doctor with a specialty in gastroenterology, and other individuals with expertise related to the above subjects. EX1070 ¶30. Pet. 5. At this stage of the proceeding, Patent Owner neither contests Petitioner’s proposed definition of the ordinarily skilled artisan nor provides an alternative definition. See generally Prelim. Resp. For the purposes of this Decision, we accept and use Petitioner’s proposed, and unopposed, definition of the ordinarily skilled artisan. It appears that Petitioner’s proposed definition comports with the high level of skill in the art reflected in the prior art of record and the ’061 patent, itself. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art itself [may] reflect[] an appropriate level” as evidence of the ordinary level of skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). D.” slip op. at 20
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownNo construction neededOther
“When the specification explains and defines a term used in the claims, without ambiguity or incompleteness, there is no need to search further for the meaning of the term.” Multiform Dessicants, Inc. v. Medzam, Ltd., 133 F.3d 1473, 1478 (Fed. Cir. 1998). The Specification expressly states that “[t]he terms ‘orally disintegrating tablet’, ‘orally dispersing tablet’, or ‘ODT’ refer to a solid dosage form of the present invention, which disintegrates rapidly in the oral cavity of a patient after administration, without chewing.” Ex. 1001, 5:12–15. At this stage of the proceeding, we interpret the language “orally disintegrating tablet” / “orally dispersing tablet” / “ODT” to have the meaning as expressly set forth in the Specification, as noted above. slip op. at 23
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · GrahamPatents in suitUS 11,260,061 - Provisur Technologies, Inc. v. Weber Food Technology GmbHAll claims unpatentablePTAB · May 28, 2025 · IPR2024-00235 · APJ Carl M Defranco · IPR · Final written decision
Claims 1–6, 8, 10, and 14–16 are unpatentable as anticipated by Young and obvious over Young and Norrie; the Johnson and Belk ground was not reached.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Provisur proposes that one of ordinary skill in the art would have had: (1) a bachelor’s degree (or equivalent) in mechanical engineering (or a similar field) and at least two years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field); or (2) at least seven years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field). Pet. 12. Weber does not contest Provisur’s framing of the level of ordinary skill in the art. See generally PO Resp. There being no dispute, we adopt Provisur’s definition of the level of skill in the art.” slip op. at 5
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Provisur construes the claim terms “according to their plain and ordinary meanings as understood by a [person of ordinary skill in the art] in view of the specification and prosecution history” and posits that “[n]o terms require an explicit construction to resolve the unpatentability controversy between the parties here.” Pet. 13. Weber appears to agree, stating in the related district court action that “most of [its] patent claims are plain and ordinary . . . [t]hey’re not difficult or complex claims or claim terms.” Ex. 3 US 5,514,032, issued May 7, 1996 (Ex. 1004, “Young”). 4 US 4,979,269, issued Dec. 25, 1990 (Ex. 1005, “Norrie”). 5 US 6,929,540 B2, issued Aug. 16, 2005 (Ex. 1006, “Johnson”). 6 US 6,198,834 B1, issued Mar. 6, 2001 (Ex. 1007, “Belk”). 1028, 5. This being the case, we do not find the need to expressly construe any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (confirming that the Board need not construe claim terms where their construction is not material to the dispute).” slip op. at 5
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“without first determining how much fat existed to begin with, i.e., prior to the side of meat being trimmed. But, as Provisur correctly notes, Weber ignores what one skilled in the art reasonably would have understood from reading Young’s disclosure as a whole. See Pet. 30–36 (citing Ex. 1003 ¶¶ 104–106, 109–112); Pet. Reply 2–12. When that is done, one skilled in the art would have understood that a necessary premise of Young’s determination of the thickness of fat to remain on the loin is knowing the thickness of the fat to begin with, which Young’s imaging system 190 and imaging processing routine 240 determine by first analyzing a series of “fat/lean separation lines” and “edge lines” in the side of meat being trimmed. Pet. 30–32 (citing Ex. 1004, 17:34–62, 18:33–56, 22:53–24:38, Figs. 2, 13); Pet. Reply 3–7 (citing portions of same evidence). More specifically, as described in Young (and articulated by Provisur), the side of meat is placed fat side down on a product support, i.e., platen 20. See Ex. 1004, 7:16–21, Figs. 1, 2. Using several cameras—top plan camera 196, end view camera 197, and fat line camera 198—Young’s imaging system 190 acquires multiple images of the side of meat from various angles and under various lighting conditions to “provide image data regarding each side of [meat].” See id. at 17:34–18:56. That image data is then used by Young’s image processing routine 240 to generate a series of demarcation lines on the side of meat, including: (1) fat/lean separation lines (representing the interface between the loin meat and the fat layer along top, side, and end views of the meat product; and (2) edge lines (representing lines along the outer surface of the meat product). See id. at 22:53–23:67, Figs. 10, 13 (Blocks 242, 246, 250, 254). In addition, “a plurality of points (preferably 20) are generated for each of the fat/lean separation and edge lines using known pattern matching routines.” Id. at 23:28–30, Fig. 13 (Blocks 244, 248, 252, 256); see also id. at 23:61–63 (essentially same). The fat/lean separation and edge lines (and points therein) generated by Young’s image processing routine 240 are then used to calculate certain dimensions and characteristics of the side of meat, such as height, length, and width. Id. at 24:10–22, Fig. 13 (Block 258). As Provisur’s expert credibly testifies, one skilled in the art would have understood that the dimension from the fat/lean separation line to the edge line along the outer surface represents the thickness of fat cover on the side of meat, i.e., before the fat is trimmed. See Ex. 1003 ¶ 106. Insofar as how that dimension is used, Young states that controller 172 uses “dynamic (real time) image data” of the fat/lean separation and edge lines “to dynamically modify the cutting profile of the loin knife assembly 100 so that the assembly follows a fixed distance from the separation line to provide the optimum fat cover for the loin.” Ex. 1004, 18:32–45; see also id. at 17:48–52 (describing “real time processor” for “image processing routines”). Notably, according to Young, the “fixed distance” represents the “desired” thickness of fat that remains on the loin, after trimming, and “sufficiently keeps the loin from drying out, but doesn’t make the loin look too fat,” although “[o]ther fat thicknesses may be desired in the alternative.” Id. at 20:60–66; see also id. at 10:39–42 (“Through control of the knife blade along several axes, assembly 100 preferably produces an optimum separation between loin and belly, with a desired fat covering left on the loin.” (emphases added)). Because the desired thickness of fat cover is what remains on the loin” slip op. at 9
- Strike new argumentNew argument consideredDecided for patent owner
“argument that Weber considers vital to its dispute of Provisur’s showing for the claimed fat thickness determination. During oral hearing, Weber repeatedly argued that Provisur changed theories midstream, i.e., between the time of the petition and the hearing. See Hrg. Tr. 22:18–24:47; see also id. at 31:14–22, 33:8–18, 34:16–20, 49:17–50:15, 54:16–56:25 (repeating same argument). More specifically, according to Weber, Provisur originally relied only on image data from Young’s “top view” camera as processed in “block 246” of Young’s image processing routine 240 when showing how Young meets the claimed fat thickness determination, whereas now Provisur relies on image data from Young’s “end view” cameras as processed in “Block 254.” Compare PO Sur-Reply 3–6 (focusing on Young’s “top view camera” in “block 246”), with Hrg. Tr. 27:4–16 (“[Block] 246, which is what they relied on, is processing images from the top-view camera in Young’s system. It is generating lines from the top-view camera in Young’s system. What they are newly trying to rely on today, for the first time, is Block 254 that is discussed toward the bottom of column 23 in Young, and that analyzes different images from a different camera. It is the end camera. It generates different lines. It demonstrates an end fat/lean line and an end edge line. Prior to today’s hearing, neither Petitioner, nor its expert, had ever discussed Block 254. You will not find a single reference to 254 in their papers, nor have they discussed the end edge line. It is completely new today. It finds absolutely no support in the record.” (emphases added)). We disagree with Weber’s contention. As shown and described in the petition, Provisur relies on more than simply Young’s “top view” camera and “block 246.” See Pet. 29–31. Rather, in its petition, Provisur annotates Young’s Figure 2 to show that image data from all three cameras of “imaging system 190”—“top plan camera 196, end view camera 197, [and] fat line camera 198”—play a role in the determination of fat thickness.8 Id. at 30. Moreover, Provisur cites the entire process depicted in “Figure 13” and described in columns “22:53–24:38” of Young as critical to the determination. Id. at 31. Those cited portions of Young involve not only the analysis of fat/lean and edge lines from “top view” images (block 246), but also the analysis of fat/lean and edge lines from “end view” images (blocks 250 and 254). See Ex. 1004, 23:12–24:13. In other words, Provisur’s showing for the claimed fat thickness determination is based on Young’s collective analysis of all those images. Indeed, Provisur’s expert confirms as much when confronted by Weber on cross-examination— Q. How does [Young] use the other cameras to identify that fat/lean separation line? A. Again, this is a -- this is a three-dimensional product that’s not regular, and all the views basically are needed to be able to describe that complex three-dimensional shape, so that the knife will be able to cut at that -- at that line, offset by whatever desired thickness there is, on that three-dimensional shape. Ex. 2006, 25:15–27:19 (emphasis added). 8 Indeed, contrary to Weber’s assertion, Provisur highlights “fat lean separation camera 198,” not top view camera 196, as most critical to the determination of fat thickness. Pet. 31. In the end, we reject the notion that Provisur changed theories” slip op. at 12
Patent outcomesUS 8,529,321 unpatentableClaim construction§ 102 anticipation§ 103 obviousnessPatents in suitUS 8,529,321 - Microsoft Corporation v. Eyesmatch Ltd.InstitutedPTAB · May 28, 2025 · IPR2025-00296 · APJ Neil T Powell · IPR · Institution
The Board instituted review of claims 1–18 on all petition grounds and granted Microsoft’s motion to join IPR2025-00296 with IPR2024-00810.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“II. DECISION The challenges to the ’110 patent’s claims in this Petition are identical to the challenges in the ’810 IPR’s petition. See, e.g., Pet. 6; ’810 IPR, Paper 1, 8. Additionally, in this proceeding, Patent Owner has not argued that the Petition’s challenges lack sufficient merit to institute trial. See, e.g., Notice 1. For the same reasons we explained in the ’810 Institution Decision, we institute inter partes review of all challenges in the Petition.” slip op. at 4
- PTAB / AIA Trials › Joinder §315(c) / SAS all-or-nothingJoinder, grantedGranted
“Joinder is a matter within the Board’s discretion based on the particular circumstances of each proceeding. In this proceeding, we are persuaded that Petitioner has demonstrated that joinder with the ʼ810 IPR would avoid duplication and promote the efficient resolution of both proceedings.” slip op. at 5
NonePatents in suitUS 8,982,110
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.