- Innolux Corporation v. Phenix Longhorn LLCInstitution deniedPTAB · Jun 9, 2025 · IPR2025-00044 · APJ Michael J Strauss · IPR · Institution
The Board denied institution because the Petition violated Rule 42.104(b)(3) and did not show a reasonable likelihood that claims 1–3, 5, and 6 were unpatentable as obvious.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Accordingly, Petitioner has not identified corresponding structure for performing the recited functions of “optimizing . . . gamma reference voltage levels using means for executing a predetermined algorithm according to a predetermined criteria and data sensed by . . . at least one sensor, wherein said means for executing said predetermined algorithm is separate from [a] display to achieve [a] desired gamma curve” as required under 37 C.F.R. § 42.104(b)(3). Because Petitioner has not provided constructions, either rebutting the presumption that “means for executing” is a means-plus-function term, or identifying corresponding structure if it is a means-plus-function term, Petitioner has violated Rule 104(b)(3).” slip op. at 20
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner argues that a person of ordinary skill in the art (POSA) “would have had at least a bachelor of science degree in physics, electrical engineering, or the equivalent thereof and three (3) years of experience in circuit design or display technologies.” Pet. 12 (citing Ex. 1003 ¶ 24). According to Petitioner “[s]uch a POSA would have had knowledge of integrated circuits, gamma correction, and storage of gamma correction voltage values within memory, and would have understood how to search available literature for relevant publications.” Id. (citing Ex. 1003 ¶ 24). Patent Owner applies Petitioner’s definition for the purposes of the Preliminary Response. Prelim. Resp. 2. For purposes of this Decision, and based on the current record, we adopt Petitioner’s assessment of the level of skill for one of ordinary skill in the art. Pet. 12. This assessment is consistent with the ’788 Patent and the asserted prior art, and we apply it in our analysis below.” slip op. at 8
- BurdenDecided for patent owner
“Accordingly, Petitioner has not identified corresponding structure for performing the recited functions of “optimizing . . . gamma reference voltage levels using means for executing a predetermined algorithm according to a predetermined criteria and data sensed by . . . at least one sensor, wherein said means for executing said predetermined algorithm is separate from [a] display to achieve [a] desired gamma curve” as required under 37 C.F.R. § 42.104(b)(3). Because Petitioner has not provided constructions, either rebutting the presumption that “means for executing” is a means-plus-function term, or identifying corresponding structure if it is a means-plus-function term, Petitioner has violated Rule 104(b)(3).” slip op. at 20
- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for patent owner
“and 5 recites “means for executing.” Ex. 1001, 7:36–40, 8:35–37. The use of the term “means” creates a rebuttable presumption that 35 U.S.C. § 112 ¶ 6 applies. See Williamson, 792 F.3d at 1348. Consistent with Patent Owner’s arguments (Prelim. Resp. 36–39), the Petition does not address the presumption and, more specifically, the Petition does not provide any argument or evidence as to why the presumption is rebutted. Furthermore, even if we were to consider Petitioner’s newly presented argument that “[t]he plain and ordinary meaning of ‘means for executing a predetermined algorithm . . . ’ connotes a general-purpose processor, which is understood as structure sufficient to perform the function” (Pet. Reply 5), such argument is not persuasive as it is not supported by evidence earlier presented in the Petition or otherwise. Furthermore, even if the plain and ordinary meaning of means for executing a predetermined algorithm were a general-purpose processor, for a computer implemented means-plus-function term the corresponding structure must be the specific algorithm implemented by the processor as argued by Petitioner. Pet. Reply 6.” slip op. at 16
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · GrahamPatents in suitUS 7,557,788 - Abbott Laboratories v. Newtonoid Technologies, L.L.C.Adverse judgmentPTAB · May 29, 2025 · IPR2024-00932 · APJ Mary C Hoffman · IPR · Adverse judgment
The Board granted Patent Owner’s request for adverse judgment, terminated the trial, and cancelled claims 1 and 4–20.
RulingsAdverse judgment- Adverse judgmentAdverse judgmentGranted
“Our rules provide that “[a] party may request judgment against itself at any time during a proceeding.” 37 C.F.R. § 42.73(b). We understand Patent Owner’s May 19, 2025 email as a request for judgment against itself. Accordingly, on the record before us, we enter adverse judgment against Patent Owner pursuant to 37 C.F.R. § 42.73(b) and terminate the trial pursuant to 37 C.F.R. § 42.72. Accordingly, it is: ORDERED that Patent Owner’s May 19, 2025 email request for adverse judgment pursuant to 37 C.F.R. § 42.73(b) is granted;” slip op. at 3
NonePatents in suitUS 11,392,818 - Google, LLC. v. Escapex IP LLCInstitutedPTAB · May 28, 2025 · IPR2025-00337 · APJ Stacey G White · IPR · Institution
The Board instituted IPR on claims 1–24 based on five § 103 grounds involving Fuloria and Andler with additional references.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Under 35 U.S.C. § 314(a), an inter partes review may not be instituted unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons stated below, we determine that Petitioner has established a reasonable likelihood that it would prevail with respect to at least one claim. We, therefore, grant Petitioner’s request to institute inter partes review of the challenged claims on the asserted grounds.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“According to Petitioner, a person of ordinary skill in the art would have had “a bachelor’s degree in computer science or a similar field and three years of professional computer programming experience, including experience with networked media and databases, where additional education can substitute for experience or vice versa.” Pet. 20 (citing Ex. 1002 ¶¶ 27– 31). The level of ordinary skill in the art is usually evidenced by the references themselves. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978). Petitioner’s description of a person of ordinary skill appears commensurate with the subject matter before us, and thus, we apply Petitioner’s definition for purposes of this Decision.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner states that “to the extent that [the term “engagement”] requires construction, it should be construed as ‘an indication that a user should be distinguished with respect to the content over another user.” Pet. 11 (citing Ex. 1001, 5:53–55; Ex. 1002 ¶ 41). Based on the record before us, we see no need for express construction of any term for the purposes of this Decision. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’”).” slip op. at 9
- BurdenInstituted
“We are persuaded by Petitioner’s arguments and evidence. Fuloria teaches “a mechanism for user to promote social networking objects to other users.” Ex. 1004 ¶ 1. Fuloria displays a news feed containing social media content items. Id. at code (57), ¶¶ 6, 27. Users in Fuloria may like a piece of content or “for a given price” the user may turn their like into a “super-like.” Id. ¶ 37. “The ‘super-liked’ story is priced and directed toward users in a similar manner as a social ad. In particular embodiments, sponsored story system 304 may also add a weight to the story to alter its direction toward users.” Id. ¶ 39. Petitioner argues that “[t]his functionality represents uncapped engagement . . . because Fuloria places no limitation on how many times a user can super-like a piece of content.” Pet. 24–25. Dr. Bederson supports Petitioner by noting that Fuloria does not “place any limitation on how many credits a user can spend to increase the reach of the content.” Ex. 1002 ¶ 76. Further, Dr. Bederson states that “[m]ultiple different users can also promote the same content item. By allowing users to promote or ‘super-like’ content which also increases engagement with that content by other users, Fuloria’s system also facilitat[es] uncapped engagement with that content.” Id. ¶77. We find these arguments to be persuasive. The ’687 patent states that “[s]o long as the user has sufficient resources, the user may promote herself or others with uncapped (i.e., unlimited) engagements, which may facilitate getting noticed by other users, whether with respect to a social media content item.” Ex. 1001, 2:6–10. Similarly, Fuloria allows users to expend their resources and to have the super-like displayed according to the amount paid for the super-like. Ex. 1004 ¶ 57 (“In particular embodiments, the advertisement system adjusts the display of the ‘super-liked’ story based upon social factors as well as the real-world value of the credits paid.”); see also id. ¶ 38 (“[T]he social networking system may deduct the credits based on a cost per impression (CPM), effective cost per impression (eCPM), cost per click (CPC), or cost per action (CPA) pricing model”). Fuloria teaches likes from any number of users which is argued to disclose the multiple users recited in the claim. See Ex. 1002 ¶ 82 (discussing Fuloria’s display of engagement by a user and pointing out that Figure 9A shows 1,884 likes); see also id. ¶ 87 (“Fuloria teaches that ‘super-likes’ are available to users in general (and thus to first, second, third, etc. users).”). As to the number of engagements displayed by the first, second, and” slip op. at 16
Claim constructioncites PhillipsPatents in suitUS 10,474,687 - Inductev, Inc. v. Witricity CorporationAll claims unpatentablePTAB · May 20, 2025 · IPR2024-00105 · APJ Christopher L Ogden · IPR · Final written decision
Claims 1–13 and 16 are unpatentable as obvious under § 103(a) over the stated Fells-based grounds.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner argues that a person of ordinary skill in the art “would have had . . . a bachelor’s degree in electrical engineering, microelectronics, or equivalent, and . . . two to three years of industry or research experience,” and “a higher level of education or skill might make up for less experience, and vice-versa.” Pet. 6 (citing Ex. 1003 ¶¶ 39–44). Patent Owner “does not disagree with Petitioner’s definition of the level of ordinary skill in the art,” but “does not believe that resolution of the Petition depends on the precise definition of the level of ordinary skill.” PO Resp. 12. Petitioner’s proposed articulation is supported by testimonial evidence and appears consistent with the types of problems and solutions in the ’184 patent. See Ex. 1001, 1:15–2:53. As it is uncontested, we adopt it for this decision.” slip op. at 5
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“The parties agree that the terms of the contested claims should be given their ordinary and customary meaning, but neither party argues that we should construe any claim terms explicitly. Pet. 6 (citing Ex. 1003 ¶¶ 62– 63); PO Resp. 12. We agree with the parties that, for this decision, we do not need to construe any of the terms explicitly. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). However, the meaning of certain terms are contested, including most notably “magnetic field sensor,” and we discuss those terms below in the context of the prior art.” slip op. at 6
- Claim Construction › Intrinsic evidence (Phillips canons) › Preamble limiting or notNot reached
“Petitioner argues that, to the extent the preamble is limiting, Fells discloses the recited wireless energy transfer system, and that the system includes facilities to detect FOD. Pet. 8–9 (citing Ex. 1005 ¶ 191, Fig. 2; Ex. 1003 ¶¶ 66–71, 96–101). Patent Owner does not specifically contest Petitioner’s arguments. See PO Resp. We agree with Petitioner’s argument that Fells discloses the preamble; thus, we need not decide whether the preamble is limiting. See Ex. 1005 ¶ 191, Fig. 2.” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“We disagree with Patent Owner’s argument that the ordinary and customary meaning of “magnetic field sensor” refers to a device that measures only external magnetic fields. There is nothing in the claim language to suggest such a limitation: the plain language simply refers to a “magnetic field sensor,” without regard to how the sensor works or where it senses magnetic fields from. Ex. 1001, 12:16. In fact, the claim does not explicitly require sensing anything at all using the magnetic field sensor, merely reciting a “foreign object debris detection system” comprising the sensor and that the “foreign object debris detection system is configured to verify” the presence of FOD. The very general nature of how the magnetic field sensor is recited, without any explicit recitation of how its output may be used, undermines Patent Owner’s overly restrictive interpretation. Although the ’184 patent specification includes examples of measuring external magnetic fields to detect FOD, Patent Owner has not pointed to anything in the specification indicating an intent to restrict the term “magnetic field sensor” to only those sensors that measure external magnetic fields. Nor is there intrinsic evidence that an “eddy-current sensor” would not also be a magnetic field sensor, given that it senses magnetic fields. Indeed, as Petitioner persuasively argues, an eddy-current sensor still measures external magnetic fields—albeit magnetic fields generated within FOD through interaction with a powered sensor. Pet. 6–7; Ex. 1037 ¶¶ 14– 16, 25–29.” slip op. at 17
Patent outcomesUS 10,027,184 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,027,184 - Inergy Technology, Inc. v. Force Mos Technology Co., Ltd.Some claims unpatentablePTAB · May 16, 2025 · IPR2024-00094 · APJ Mary C Hoffman · IPR · Final written decision
Claims 1 and 3–5 are unpatentable over Kobayashi and Hshieh; claims 2 and 6 were not shown unpatentable over the asserted combinations.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner asserts that a person of ordinary skill in the art (“POSITA”), “at the filing date of the ’409 [p]atent[,] would have a master’s degree in electrical engineering, and at least two years of relevant work experience in the field of integrated circuit design and manufacturing.” Pet. 13 (citing Ex. 1003 ¶ 52). Patent Owner does not dispute Petitioner’s proffered level of ordinary skill in the art. PO Resp. 9 (citing Ex. 2021 ¶ 55). We adopt Petitioner’s proffered level of ordinary skill in the art, which is supported by unopposed declaration testimony and consistent with the ’409 patent and prior art of record. See, e.g., Ex. 1001, 1:6–3:8 (describing the invention and related art in terms of integrated circuit design and fabrication). Neither party, moreover, indicates the overall result would change based on a different definition.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner
“Based on the arguments and evidence, we disagree with Petitioner’s proposed construction requiring the corners to be rounded via a particular process, because doing so would improperly import a process of manufacture from the Specification into apparatus claims. See Cont’l Circuits LLC v. Intel Corp., 915 F.3d 788, 799 (Fed. Cir. 2019) (explaining that, generally, a novel product that meets the criteria of patentability is not limited to the process by which it was made, however, process steps can be treated as part of a product claim if the patentee has made clear that the process steps are an essential part of the claimed invention). Here, the portions of the Specification relied on by Petitioner (Ex. 1001, 2:10–20, 4:53–64) disclose a process for manufacturing but do not make clear that the process is an essential part of the claimed invention. We also disagree with Petitioner’s assessment of the prosecution history, i.e., that the claims were amended to distinguish the claimed rounded corners from Pfirsch’s rounded corners, which, presumably, are formed as an incidental result of lithography. On the contrary, the Examiner found (and Patent Owner acknowledged) that Pfirsch has rounded corners. Ex. 1002, 276, 295, 302. As Patent Owner correctly points out, the claims were amended during prosecution to include a “circular” contact to distinguish over Pfirsch’s square contact. See id. Petitioner does not otherwise point to evidence that Patent Owner clearly and unmistakably limited the claim scope to rounded corners formed by a particular process.” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“is ‘known’ is not sufficient for a motivation to combine.” PO Resp. 47. However, the motivation-to-combine analysis is a flexible one, and the “known-technique” rationale is adequate to show a motivation to combine. For example, “if a technique has been used to improve one device, and a person of ordinary skill in the art would recognize that it would improve similar devices in the same way, using the technique is obvious unless its actual application is beyond his or her skill.” KSR, 550 U.S. at 417; see also Intel Corp. v. PACT XPP Schweiz AG, 61 F.4th 1373, 1380 (Fed. Cir. 2023) (quoting Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 799–800 (Fed. Cir. 2021) (“If there’s a known technique to address a known problem using ‘prior art elements according to their established functions,’ then there is a motivation to combine.”). Here, as discussed above, the record shows that top view rounding was a known technique to eliminate corners, and that corners were a known problem (e.g., corners tend to reach undesirable higher peak electric field leading to premature breakdown voltage). See, e.g., Ex. 1003 ¶¶ 37, 39, 42– 44, 55–57, 122, 133, 135–141; Ex. 1005, 7:57–8:4; Ex. 1006, 1:18–21, 2:19–39, 5:3–17, Figs. 6A–8B; Ex. 1011, 1:29–41; Ex. 1012; PO Resp. 13, 46 (citing Ex. 1011, 1:34–40); Ex. 2021 ¶ 87. Furthermore, there is no dispute that modifying Kobayashi to eliminate corners via top view rounding was anything more than a “minor and commonplace modification” of cell shape within the skill of an ordinary artisan, or that top view rounding would change Kobayashi’s established function. Pet. 60; Ex. 2021 ¶ 86.” slip op. at 30
- Obviousness (§103) › KSR rationalesMotivation foundUnpatentable
“We agree that Kobayashi’ s Figure 5A solely cannot be relied upon as disclosing the claimed diameter. See Hockerson-Halbertstadt, Inc. v. Avia Group Int'l, 222 F.3d 951, 956 (Fed. Cir. 2000) (patent drawings not designated as being drawn to scale cannot be relied upon to define precise proportions of elements if the specification is completely silent on the issue). However, we do not agree that Petitioner failed to show Kobayashi suggests the recited diameter. We disagree with Patent Owner’s assertion that Dr. Liu’s “vague, purported ‘design considerations’” are “unsupported.” PO Resp. 43. Although Kobayashi is silent on the width/diameter of the trench contact in Figure 5A, Kobayashi discloses trenched gates having dimensions below 0.5 μm, which demonstrates that it was known in the art, and required no more than an exercise of ordinary skill in the art, to create trenched features of widths well below 1 μm. Kobayashi also discloses that the width of each trench, and the distance between the adjacent trenches (which includes the trench contact), must be selected to optimum sizes . . . [and] these sizes . . . have some degrees of freedom.” Ex. 1005, 7:42–48. This demonstrates a POSITA would seek to optimize trench contact width or diameter. Dr. Liu’s testimony regarding design considerations suggests the desirability of a reduced diameter trench contact, e.g., to minimize the width of the trench contact for purposes of easier filling, to minimize the total width of the unit cell, and to minimize manufacturing time by reducing etch back time. See Ex. 1003 ¶¶ 111–114. As Patent Owner acknowledges, “there is always a motivation to speed up the fabrication process or shrink feature sizes of semiconductors.” PO Resp. 43 (citing 2021 ¶ 131). However, contrary to Patent Owner’s arguments, these are not generic motivations “untethered” from Kobayashi. Id. Indeed, Kobayashi directly addresses the fabrication process (including new techniques to obtain trench widths under 0.5 μm) and the need to optimize the size of trench gates and the space in between (which includes the trench contact). Ex. 1005, 7:43–54, 7:19–9:53. Patent Owner also argues that Petitioner presents no evidence that modifying Kobayashi to have a diameter smaller than 1 μm is predictable. PO Resp. 44. We disagree. As discussed above, Petitioner points to Kobayashi’s teachings that the sizes are to be optimized and that the trench gate width is smaller than 0.5 μm, which suggests making other trench features of that width was within ordinary skill. Ex. 1003 ¶ 112. Furthermore, Kobayashi’s silence as to the dimensions of the trench contact suggests that the trench contact diameter dimension is likely in the ballpark of the other explicitly disclosed trenched feature dimensions and is a matter of routine optimization. In addition, Patent Owner advances no persuasive evidence that the claimed diameter produces unexpected results or is otherwise critical. Patent Owner also argues that reducing trench contact diameter has downsides (i.e., reduced ease of filling for metal plugs and reduced current carrying capacity) not addressed by Petitioner; however, Petitioner is not required to address those tradeoffs in its Petition, and we do not see how those tradeoffs would prevent the proposed combination. PO Resp. 44; see Medichem, S.A. v. Rolabo, S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006) (“a given course of action often has simultaneous advantages and disadvantages, and this does not necessarily obviate motivation to combine.”); Winner Int'l Royalty Corp. v. Wang, 202 F.3d 1340, 1349 n.8 (Fed. Cir. 2000) (“The fact that the motivating benefit comes at the expense of another benefit, however, should not nullify its use as a basis to modify the disclosure of one reference with the teachings of another. Instead, the benefits, both lost and gained, should be weighed against one another.”). Here, Dr. Liu listed numerous benefits of having a reduced diameter, which weigh against the potential downsides raised by Patent Owner. Ex. 1003 ¶¶ 111–114. Moreover, we do not see how the downsides/tradeoffs prevent modifying Kobayashi in the manner suggested when the same tradeoffs appear to be applicable to the ’409 patent. Having considered Patent Owner’s arguments, and taking into” slip op. at 43
Patent outcomesUS 7,812,409 mixedClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,812,409 - Inergy Technology, Inc. v. Force Mos Technology Co., Ltd.No claims unpatentablePTAB · May 16, 2025 · IPR2024-00093 · APJ Grace Karaffa Obermann · IPR · Final written decision
Claims 1–9 were not proven unpatentable because the asserted references did not establish the claimed epitaxial layer or the required coverage of the trench sidewalls.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner defines a person of ordinary skill in the art as having “a Master’s degree in electrical engineering, and at least two years of relevant work experience in the field of integrated circuit design and manufacturing.” Pet. 13 (citing Ex. 1003 ¶¶ 32–37, 57). Patent Owner does not dispute Petitioner’s definition. PO Resp. 6. We adopt Petitioner’s proposed definition of the level of ordinary skill in the art because it is supported by unopposed declaration testimony and appears to be consistent with the disclosures of the ’634 patent and the asserted prior art references. See Ex. 1001, 1:6–2:33 (describing the invention and related art in terms of integrated circuit design and fabrication); see also Ex. 1006 ¶¶ 1–6 (Hirler); Ex. 1008 ¶¶ 1–37 (Kobayashi); Ex. 1009 ¶¶ 2–29 (Shiraishi). Neither party, moreover, indicates the overall result would change based on a different definition.” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“Petitioner argues that “the sidewalls of said trenches in said base layer are covered” should be construed to mean that “the entire sidewalls of” those trenches are covered. Pet. 18–19. We refer to this as “the sidewall limitation.” Petitioner shows persuasively that the disclosure and file history of the ’634 patent support its position on the sidewall limitation. Id. Patent Owner, for its part, observes that, after the filing of the Petition. two District Courts adopted the construction proposed by Petitioner.” PO Resp. 21 (citing Ex. 2010, 6–9; Ex. 2011, 23). Patent Owner also agrees to apply Petitioner’s construction for purposes of this proceeding. Id. We agree with Patent Owner that an express construction of the sidewall limitation is necessary to this Decision, id., and adopt Petitioner’s undisputed definition because it is supported by the record. No other claim term requires express construction for purposes of this Decision.” slip op. at 8
- BurdenNot shown unpatentable
“On this record, Petitioner fails to demonstrate that any claim is unpatentable under any ground asserted in the Petition. IV. CONCLUSION For the above reasons, we determine that Petitioner fails to establish by a preponderance of the evidence that claims 1–9 of the ’634 patent are unpatentable.” slip op. at 34
- Expert testimonyPetitioner expert discountedPatent owner expert creditedDecided for patent owner
“Alternatively, even if we set aside that timing issue, Dr. Liu’s bare opinion, advanced for the first time during cross-examination, that an epitaxial layer is “obvious” from Hirler’s disclosure is inadequate to support the challenges. Id. at 24–25. We accord little weight to Dr. Liu’s opinion because it is conclusory. See Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential). In any event, Petitioner does not meet, on this record, the “high standard” required to establish an inherent disclosure of an epitaxial layer in Hirler. PO Resp. 24.6 Dr. Liu opined for the first time during cross-examination “that it would have been impossible to create Hirler’s more lightly doped n- drift zone layer on top of its more heavily doped n+ substrate layer other than via epitaxy.” Id. at 25 (citing Ex. 2014, 164:16– 165:20). But Patent Owner effectively refutes that proposition with evidence that such a layer “could be created by counter-doping,” even if, as Dr. Liu contends, counter-doping may have been less ideal due to “disadvantageous mobility.” Id. (citing Ex. 2012 ¶ 133; Ex. 2014, 166:15–167:8).” slip op. at 11
Patent outcomesUS 7,629,634 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,629,634 - Inductev, Inc. v. Witricity CorporationSome claims unpatentablePTAB · May 16, 2025 · IPR2024-00140 · APJ Christopher L Ogden · IPR · Final written decision
Claims 1, 7–10, 12–16, 18, and 19 are unpatentable over the stated grounds; claims 4–6 were not shown unpatentable because the proposed multi-coil alignment lacked prior-art support.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner argues that a person of ordinary skill in the art “would have had . . . a bachelor’s degree in electrical engineering, microelectronics, or equivalent and . . . two to three years of industry or research experience in the field of wireless energy transfer,” and that “a higher level of education or skill might make up for less experience, and vice-versa.” Pet. 6 (citing Ex. 1003 ¶¶ 39–44). Patent Owner does not contest this. See PO Resp. Petitioner’s proposed articulation is supported by testimonial evidence and appears to be consistent with the types of problems and solutions in the ’654 patent. See Ex. 1001, 1:15–28. We adopt it for this decision.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We agree with Petitioner that the evidence does not suggest (and Patent Owner does not explicitly argue) that the terms “transmitting antenna” and “receiving” antenna depart from the ordinary and customary meanings of those terms. Pet. 1–2. However, for the reasons discussed below, the outcome of our decision would be the same whether we adopted Petitioner’s or Patent Owner’s proposed construction. Thus, we need not adopt either party’s proposed construction for this decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 9
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for patent owner
“spaced configuration are not confined to ferrite cores 32 and 3, and that at least a component of the flux lines will escape the cores. See Ex. 1032 ¶¶ 48–52; Ex. 1038 ¶ 54 Fig. 2. Indeed, the evidence suggests (and Dr. Horenstein acknowledges in his first declaration) that at least a component of flux will escape the core of even a traditional transformer. See Ex. 1032 ¶¶ 45–47; Ex. 1044, 6; Ex. 2001 ¶ 27. In his second declaration, Dr. Horenstein provides contrary testimony that in Odachi’s open configuration during alignment, cores 32 and 3 “act to confine or guide the magnetic flux lines, rather than radiate them into free space,” and “the flux lines would [not] leave the gap area and enter into the space distal to the magnetic circuit.” Ex. 2010 ¶ 69. But in view of Dr. Horenstein’s contrary position in his first declaration, and the lack of supporting evidence in his second, we do not find it credible. 37 C.F.R. § 42.65(a) (2022) (“Expert testimony that does not disclose the underlying facts or data on which the opinion is based is entitled to little or no weight.”); Apple Inc. v. MPH Techs. Oy, 28 F.4th 254 (Fed. Cir. 2022).” slip op. at 24
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“(4) Analysis We are persuaded by Petitioner’s argument that during the alignment process in Odachi corresponding to claim 13, there is a “spaced distance between the primary inductive coupler [230] and the secondary inductive receptacle 2” which is “reduced gradually and electromagnetic induction occurs between the coupler to the receptacle when the former coupler comes close to the latter receptacle.” Ex. 1005, 6:1–6. Thus, prior to any contact or precise alignment between the two cores, “an electromotive force is induced in the secondary coil 4 and this induced force is increased with the decrease in the spaced distance.” Id. at 6:6–8. At least in that spaced configuration, the evidence of record suggests that primary coil 31 produces a near-field component of flux into free space (the air space between the coils where there is no intervening core material) that is intercepted by secondary coil 4 to effect resonant inductive coupling, and that secondary coil 4 intercepts and receives the near-field component of flux in free space that is generated by primary coil 31 to effect resonant inductive coupling. See Ex. 1032 ¶¶ 48–52, 55. Thus, we find that Odachi discloses a “transmitting antenna” (coil 31) and a “receiving antenna” (coil 4) under Patent Owner’s proposed construction. We would reach the same finding under Petitioner’s proposed broader construction because the evidence suggests that Odachi’s coils 31 and 4 would have been considered “antennas” under the parties’ uncontested definition of that term, which is “a device that radiates and/or receives radio waves.” See id. ¶¶ 43–47, 53–54; Ex. 1032 ¶ 15 (Dr. Allen agreeing with this definition of “antenna”); Ex. 2001 ¶ 25 (Dr. Horenstein agreeing with this definition of “antenna”)). In addition, Petitioner persuasively shows that the free space between Odachi’s coils in the spaced configuration includes the “near-field region,” which includes the induction field around primary coil 31. See Ex. 2006, 498; Ex. 1045, 5:4–7; Ex. 1032 ¶¶ 53–54). Dr. Horenstein’s testimony does not contradict this. Although he points out that there are separate terms for inductive, near, and far fields, he also acknowledges that “[t]he region of space closer to the antenna than the far field is the near-field region.” Ex. 2010 ¶ 37 (citing Ex. 2006, 275).8” slip op. at 22
Patent outcomesUS 8,466,654 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,466,654 - Innolux Corporation v. Phenix Longhorn LLCInstitution deniedPTAB · May 15, 2025 · IPR2025-00043 · APJ Kevin F Turner · IPR · Institution
The Board denied institution of IPR challenging claims 1–5 and 8–14, exercising § 314(a) discretion under Fintiv based on the Texas litigation.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Institution denied fintivInstitution denied
“We agree with Patent Owner that its asserted trial date of February 17, 2026, would likely occur approximately 4 months before the latest date on which a final decision can be issued in this proceeding (June 12, 2026), and that is the metric we should use to determine the proximity of trial date to the projected statutory deadline. Accordingly, the facts underlying this factor weigh in favor of denial.” slip op. at 9
Discretionary denialPatents in suitUS 7,233,305 - Apple Inc. v. Haptic, Inc.Institution deniedPTAB · Apr 4, 2025 · IPR2024-01476 · APJ Andreas Baltatzis · IPR · Institution
The Board denied institution of review of claims 3, 6, 7, 12, and 13, exercising § 314(a) discretion under Fintiv after balancing the parallel litigation factors.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“prejudice to renewal if the PTAB institutes IPR review.” Ex. 2023, 6. A stay denial without prejudice to renew if a PTAB trial is instituted “usually weigh[s] against exercising authority to deny institution.” Fintiv, Paper 11 at 7. But “proximity of the court’s trial date and investment of time are relevant to how much weight to give to the court’s willingness to reconsider a stay.” Id. Although the District Court denied a stay pending the Board’s decision, the court also identified the proximity of the trial date and litigation investment as significant factors in its initial denial of the requested stay. See Ex. 2023, 6. Thus the evidence is inconclusive as to whether or not the District Court would stay the case if we granted institution at this time. Absent a clear indication from the District Court, we decline to predict whether a stay would be granted.” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away foundOther
“a sensor in a fixed position relative to a sensing surface to provide a fixed reference point for accurate detection of vibratory signals”), 171 (“the sensor is held in a particular position within the housing and relative to the surface that the housing is mounted to”). Stewart teaches the opposite: a sensor that is vibrated inside a housing to measure rotational movement. Ex. 1006, 5:54–56, 6:5–10, 6:20–31; Ex. 2001 ¶¶ 100, 133, 138. Thus, Stewart’s sensor is flexibly suspended with brackets inside the housing to allow movement and minimize transmission of vibrations from the surface to the sensor. Ex. 1006, 5:7–24, 7:61–64; Ex. 2001 ¶ 102. Petitioner combines Murakoshi with Stewart’s brackets and case mounts to fix the sensor to prevent it from moving within the housing and thus enable the sensor to detect vibrations from outside the housing. See Pet. 24, 33–36. But Stewart’s teachings undermine the very reason proffered by Petitioner, because Stewart’s sensor is movably suspended within the housing so that it does not detect vibrations from outside the housing. See DePuy Spine, Inc. v. Medtronic Sofamor Danek, Inc., 567 F.3d 1314, 1326 (Fed. Cir. 2009) (“An inference of nonobviousness is especially strong where the prior art’s teachings undermine the very reason being proffered as to why a person of ordinary skill would have combined the known elements.”).” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successReasonable expectation not foundOther
“Likewise, we find a significant weakness in Petitioner’s argument for a reasonable expectation of success in the combination. “The reasonable expectation of success requirement refers to the likelihood of success in combining references to meet the limitations of the claimed invention.” Intelligent Bio-Sys., Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1367 (Fed. Cir. 2016). Claim 1 requires “said sensor being in a fixed position portion” that “set[s] a rigid position of said sensor relative to said mounting surface” (limitation 1e). As discussed above, neither Murakoshi nor Stewart appear to teach a sensor in a fixed position relative to said engagement means or a rigid position relative to said mounting portion. Accordingly, even if Murakoshi’s and Stewart’s teachings were to be combined, the combined teachings would not appear to meet the limitations of the claimed invention.” slip op. at 14
§ 103 obviousnessDiscretionary denialPatents in suitUS 9,996,738 - Apple Inc. v. Haptic, Inc.Institution deniedPTAB · Apr 4, 2025 · IPR2024-01475 · APJ Andreas Baltatzis · IPR · Institution
The Board denied institution of IPR challenging claims 1, 2, 4, 5, and 8–11, exercising its discretion under § 314(a) based on the Fintiv factors.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Institution denied fintivDenied
“litigation, the Board assesses all relevant circumstances, including the merits, to balance considerations such as system efficiency, fairness, and patent quality. See Fintiv, Paper 11; NHK Spring Co. v. Intri-Plex Techs., Inc., IPR2018-00752, Paper 8 at 19–20 (PTAB Sept. 12, 2018) (precedential). We consider six factors as part of this balanced assessment when determining whether to use our discretion to deny institution: 1. whether the court granted a stay or evidence exists that one may be granted if a proceeding is instituted; 2. proximity of the court’s trial date to the Board’s projected statutory deadline for a final written decision; 3. investment in the parallel proceeding by the court and the parties; 4. overlap between issues raised in the petition and in the parallel proceeding; 5. whether the petitioner and the defendant in the parallel proceeding are the same party; and 6. other circumstances that impact the Board’s exercise of discretion, including the merits. Fintiv, Paper 11 at 5–6. In evaluating these factors, we “take[] a holistic view of whether efficiency and integrity of the system are best served by denying or instituting review.” Id. at 6.” slip op. at 8
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot reached
“vibrations on a surface and using the vibrations to generate a control signal for a device. Ex. 1004 ¶¶ 21, 25, 29, 30, 36. To measure vibrations on a surface, Murakoshi’s sensor must be fixed within the housing and held in position relative to the surface. See Ex. 1003 ¶¶ 142 (“it is necessary to hold a sensor in a fixed position relative to a sensing surface to provide a fixed reference point for accurate detection of vibratory signals”), 174 (“the sensor is held in a particular position within the housing and relative to the surface that the housing is mounted to”). Stewart teaches the opposite: a sensor that is vibrated inside a housing to measure rotational movement. Ex. 1006, 5:54–56, 6:5–10, 6:20–31; Ex. 2001 ¶¶ 100, 133, 138. Thus, Stewart’s sensor is flexibly suspended with brackets inside the housing to allow movement and minimize transmission of vibrations from the surface to the sensor. Ex. 1006, 5:7–24, 7:61–64; Ex. 2001 ¶ 102. Petitioner combines Murakoshi with Stewart’s brackets and case mounts to fix the sensor to prevent it from moving within the housing and thus enable the sensor to detect vibrations from outside the housing. See Pet. 23, 31–35. But Stewart’s teachings undermine the very reason proffered by Petitioner, because Stewart’s sensor is movably suspended within the DePuy Spine, Inc. v. Medtronic Sofamor Danek, Inc., 567 F.3d 1314, 1326 (Fed. Cir. 2009) (“An inference of nonobviousness is especially strong where the prior art’s teachings undermine the very reason being proffered as to why a person of ordinary skill would have combined the known elements.”).” slip op. at 14
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Not reached
“We find Petitioner’s argument based on the combination of Li and iFixit to be a closer call than the argument based on Murakoshi and Stewart. However, because we exercise our discretion to deny the Petition in view of the parallel litigation, we need not determine whether Petitioner meets the standard for institution based on the combination of Li and iFixit.” slip op. at 17
§ 103 obviousnessDiscretionary denialPatents in suitUS 9,996,738
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.