- Commscope Technologies LLC v. Belden Canada UlcAdverse judgmentPTAB · Sep 8, 2025 · IPR2024-01382 · APJ Kimberly Mcgraw · IPR · Adverse judgment
The Board granted Patent Owner’s withdrawal of its motion to amend and entered adverse judgment against all challenged claims after their statutory disclaimer, terminating the IPR.
RulingsAdverse judgment- PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend, grantedGranted
“In view of the facts presented, including that no decision as to the patentability of the proposed substitute claims has yet been made and Petitioner does not oppose the withdrawal, we grant Patent Owner’s Motion to Withdraw its Motion to Amend.” slip op. at 2
- Adverse judgmentAdverse judgmentGranted
“Under our rules, a party may request adverse judgment against itself at any time during a proceeding, including by disclaiming all claims involved in a trial. 37 C.F.R. §42.73(b). Because Patent Owner’s request to withdraw its Motion to Amend has been granted and Patent Owner has disclaimed all Challenged Claims such that no claims remain in the trial, we grant Patent Owner’s Motion to Terminate by Adverse Judgment.” slip op. at 3
NonePatents in suitUS 11,740,423 - Commscope Technologies LLC v. Belden Canada UlcAdverse judgmentPTAB · Sep 8, 2025 · IPR2024-01228 · APJ Kimberly Mcgraw · IPR · Adverse judgment
The Board granted Patent Owner’s withdrawal of its motion to amend and entered adverse judgment on the disclaimed challenged claims, terminating the IPR.
RulingsAdverse judgment- PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend, grantedGranted
“In view of the facts presented, including that no decision as to the patentability of the proposed substitute claims has yet been made and Petitioner does not oppose the withdrawal, we grant Patent Owner’s Motion to Withdraw its Motion to Amend.” slip op. at 2
- Adverse judgmentAdverse judgmentGranted
“Under our rules, a party may request adverse judgment against itself at any time during a proceeding, including by disclaiming all claims involved in a trial. 37 C.F.R. §42.73(b). Because Patent Owner’s request to withdraw its Motion to Amend has been granted and Patent Owner has disclaimed all Challenged Claims such that no claims remain in the trial, we grant Patent Owner’s Motion to Terminate by Adverse Judgment.” slip op. at 3
NonePatents in suitUS 11,656,422 - Commscope Technologies LLC v. Belden Canada UlcAdverse judgmentPTAB · Sep 8, 2025 · IPR2024-01227 · APJ Christopher M Kaiser · IPR · Adverse judgment
The Board granted Patent Owner’s withdrawal of its motion to amend and entered adverse judgment after it disclaimed challenged claims 1–5 and 8–13, terminating the IPR.
RulingsAdverse judgment- Adverse judgmentAdverse judgmentGranted
“Under our rules, a party may request adverse judgment against itself at any time during a proceeding, including by disclaiming all claims involved in a trial. 37 C.F.R. §42.73(b). Because Patent Owner’s request to withdraw its Motion to Amend has been granted and Patent Owner has disclaimed all Challenged Claims such that no claims remain in the trial, we grant Patent Owner’s Motion to Terminate by Adverse Judgment.” slip op. at 3
- PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend, grantedGranted
“In view of the facts presented, including that no decision as to the patentability of the proposed substitute claims has yet been made and Petitioner does not oppose the withdrawal, we grant Patent Owner’s Motion to Withdraw its Motion to Amend.” slip op. at 2
NonePatents in suitUS 11,435,542 - Commscope Technologies LLC v. Belden Canada UlcAdverse judgmentPTAB · Sep 8, 2025 · IPR2024-01218 · APJ Kimberly Mcgraw · IPR · Adverse judgment
The Board granted Patent Owner’s request for adverse judgment after it disclaimed challenged claims 1–5 and 8–13, terminating the inter partes review.
RulingsAdverse judgment- PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend, grantedGranted
“In view of the facts presented, including that no decision as to the patentability of the proposed substitute claims has yet been made and Petitioner does not oppose the withdrawal, we grant Patent Owner’s Motion to Withdraw its Motion to Amend.” slip op. at 2
- Adverse judgmentAdverse judgmentGranted
“Under our rules, a party may request adverse judgment against itself at any time during a proceeding, including by disclaiming all claims involved in a trial. 37 C.F.R. §42.73(b). Because Patent Owner’s request to withdraw its Motion to Amend has been granted and Patent Owner has disclaimed all Challenged Claims such that no claims remain in the trial, we grant Patent Owner’s Motion to Terminate by Adverse Judgment.” slip op. at 3
NonePatents in suitUS 10,795,107 - Champion Laboratories, Inc. / First Brands Group, LLC v. Hengst SENo claims unpatentablePTAB · Sep 8, 2025 · IPR2024-00603 · APJ Sheldon M Mcgee · IPR · Final written decision
Claims 1, 3, 5, 8–11, 15–17, 19, 23–25, and 28–30 were not shown unpatentable over Yokoyama, Yokoyama and Cline, or Honermann and Cline.
RulingsFinal written decision- Skill levelSkill level board ownDecided for petitioner
“On this record, we determine that the level of ordinary skill is reflected in the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (specific findings on the ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163–64 (Fed. Cir. 1985))). Because the level of ordinary skill in the art is not in dispute, and because the parties’ definition is consistent with the disclosures in the ʼ203 patent, the prior art, and the declaration testimony of Mr. Nranian and Dr. Basirat, we view the prior art and arguments through this lens when determining whether the claims are unpatentable as obvious over the prior art.5 See Graham, 383 U.S. at 17 (identifying “the level of ordinary skill in the pertinent art” as an underlying factual inquiry to be resolved in deciding obviousness, which is a question of law).” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“Although the parties spend significant portions of their briefing discussing the term “eccentric” and how it applies to certain figures from the ʼ203 patent and the relied-upon prior art, we determine that it is not necessary to expressly construe the term “eccentric” beyond the parties’ agreed-upon definition. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Ltd., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). Rather, we adopt Patent Owner’s proffered definition because it is consistent with the intrinsic record and because it is not in dispute. Specifically, Patent Owner asserts that the plain meaning of the term “eccentric” is defined as “located elsewhere than at the geometric center; also: having the axis or support so located.” PO Resp. 18–19 (citing the Merriam-Webster online dictionary definition of the term “eccentric” for support). Petitioner agrees with this definition. Pet. 35 (asserting that certain prior art elements are eccentric “because they are not located at the center of the filter insert or housing”); Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”); see also Ex. 2017 ¶ 33 (Dr. Basirat testifying that “[a] POSITA would understand that ‘eccentric’ in the context of [the] ʼ203 patent, means that central axis is located elsewhere than at the geometric center [and] not placed centrally or not having its axis or other part placed centrally”). The parties’ definition of “eccentric” is also consistent with the usage of the term in the ʼ203 patent. Ex. 1001, 10:23–31; Fig. 17.” slip op. at 14
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“Rather, we adopt Patent Owner’s proffered definition because it is consistent with the intrinsic record and because it is not in dispute. Specifically, Patent Owner asserts that the plain meaning of the term “eccentric” is defined as “located elsewhere than at the geometric center; also: having the axis or support so located.” PO Resp. 18–19 (citing the Merriam-Webster online dictionary definition of the term “eccentric” for support). Petitioner agrees with this definition. Pet. 35 (asserting that certain prior art elements are eccentric “because they are not located at the center of the filter insert or housing”); Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”); see also Ex. 2017 ¶ 33 (Dr. Basirat testifying that “[a] POSITA would understand that ‘eccentric’ in the context of [the] ʼ203 patent, means that central axis is located elsewhere than at the geometric center [and] not placed centrally or not having its axis or other part placed centrally”). The parties’ definition of “eccentric” is also consistent with the usage of the term in the ʼ203 patent. Ex. 1001, 10:23–31; Fig. 17.” slip op. at 14
- Expert testimonyPetitioner expert discountedDecided for patent owner
“(opining that “Patent Owner’s construction of ‘having an axis no located in a geometric center’ is too narrow”). Mr. Nranian’s Declaration testimony in this respect is not persuasive for several reasons. First, it is internally inconsistent. Compare Ex. 1016 ¶ 3 (criticizing the “axis” language in Patent Owner’s definition), with id. ¶¶ 9, 11 (relying on that very language to support an argument). Also, Mr. Nranian’s proposed definition of “eccentric” to merely mean “not located at the center” begs the question of what, precisely, is “the center”? Mr. Nranian does not persuasively explain how far a person of ordinary skill in the art would understand she could travel from the exact center point of an object and still be in “the center” of that object. See Tr. 10:13–19 (Judge McGee asking whether the center is “a miniscule point in the middle of [the] disc”); see also id. at 10:25–12:26 (Judge Weatherly highlighting the significant ambiguity in referring to something as in “the center”). Also, Mr. Nranian’s opinion is inconsistent with how the ʼ203 patent compares something that is “central,” i.e., “at the center,” and something that is “eccentrically” located. Ex. 1001, 7:13–14 (describing pipe nozzle 15 as “central”); id. at 8:53–56 (describing a “through hole” as “located in the center of the front panel 22” depicted in Figures 7 and 8); id. at 10:23–31 (describing return 12 as “in the center” and outlet 13 as “eccentrically thereto” in Figure 17). Patent Owner’s colorized and annotated Figure 7 is reproduced below: Patent Owner’s colorized and annotated version of Figure 7 of the ʼ203 patent illustrates “central pipe nozzle 15” in yellow passing through the “through hole” located in “the center” of front panel 22. PO Resp. 20. Significantly, pipe nozzle 15 and the through hole in panel 22 are both described as “central” and in “the center” but must have different diameters; otherwise, “central pipe nozzle 15” would not be capable of traveling through “through hole 22.” Ex. 1001, Fig. 7. Thus, the ʼ203 patent intrinsically bases whether an element is “central” or “in the center” on whether its axis is located at the geometric center. This is also illustrated in Figure 17 of the ʼ203 patent, reproduced below: Figure 17 of the ʼ203 patent illustrates filter housing 10 with return 12 “in the center . . . and, eccentrically thereto, the outlet 13 with the seat 14 for the blocking element 24.” Ex. 1001, 10:23–30. Finally, Mr. Nranian’s narrow interpretation of “eccentric”––which excludes the “having the axis or support so located” in the geometric center language––is at odds with the arguments it was proffered to support. Cf. Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”).” slip op. at 29
Patent outcomesUS 9,023,203 not shown unpatentableClaim construction§ 103 obviousnesscites GrahamPatents in suitUS 9,023,203 - PTAB · Sep 3, 2025 · PGR2025-00021 · APJ Kimberly Mcgraw · PGR · Institution
The Board instituted PGR on claims 1, 3–7, and 12–20, finding it more likely than not that at least claim 1 would have been obvious over Kim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Institution of a post-grant review is authorized by statute when “the information presented in the petition . . . demonstrate[s] that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” 35 U.S.C. § 324(a) (2018); see also 37 C.F.R. § 42.4 (2023). Post-grant review is available for patents that issue from applications that at one point contained at least one claim with an effective filing date on or after March 16, 2013. See Leahy-Smith America Invents Act, Pub. L. No. 112- 29, 125 Stat. 284 (2011) (“AIA”), §§ 3(n)(1), 6(f)(2)(A). For the reasons discussed below, we determine that Petitioner establishes they are more likely than not to prevail with respect to the unpatentability of at least one of the challenged claims. Accordingly, we institute a post-grant review of claims 1, 3–7, and 12–20 of the ’838 patent.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“II. ANALYSIS A. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art (“POSITA”) would have had “a bachelor of science degree in electrical engineering or a similar discipline, along with 2–3 years of professional experience working with (e.g., researching, designing, or teaching) 3D memory devices, or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may substitute for professional experience).” Pet. 21 (citing Ex. 1003 ¶¶ 36–37). Petitioner further contends that a” slip op. at 5
- BurdenInstituted
“(c) Analysis We have reviewed and considered both parties’ arguments and evidence and determine that Petitioner has sufficiently shown that Kim discloses or suggests the limitations of claim 1. We disagree with Patent an “island” shaped landing pad that is surrounded on all four sides by auxiliary layer 122. Based on the present record, we do not understand the Petition to rely solely on the “island” landing pad embodiment of Kim because the Petition also refers to an embodiment in Kim that is not island shaped. See, e.g., Pet. 34–35 (citing, inter alia, Ex. 1005, Fig. 5). In this embodiment, the sides of protrusion pad PAD_P are “coplanar” with 2 of the edges of PAD_B (i.e., E3, E4). See, e.g., Ex. 1005, Fig. 5. We understand that, in this embodiment, PAD_P is not an “island” landing pad because the auxiliary layer would not surround the landing pad on the sides of the landing pad coplanar to edges E3 and E4. See, e.g., Ex. 1005, Fig. 5. Thus, in this embodiment, the asserted first material layer (i.e., insulating layer 110 and the portion of the auxiliary layer to the left of the landing pad) would not form one structure all the way around PAD_P, as contended by Patent Owner. Prelim. Resp. 21 (citing Ex. 2006 ¶ 61). Rather, the asserted first material layer would end as depicted by Petitioner. See, e.g., Pet. 34–35 (citing Ex. 1005, Fig. 4B).” slip op. at 18
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Patent Owner states that it does not believe any terms require construction. Prelim. Resp. 9. Based on the record before us, we determine that none of the claim terms discussed above require express construction for purposes of this Decision. To the extent the parties’ arguments raise additional claim construction issues, for efficiency, we address any such arguments in the context of our unpatentability analysis below.” slip op. at 7
Claim construction§ 103 obviousnesscites PhillipsPatents in suitUS 12,010,838 - PTAB · Aug 25, 2025 · IPR2025-00631 · APJ Kevin W Cherry · IPR · Institution
The Board instituted IPR on claims 1–3, 5, 7–9, 11–13, and 15–22 on all five asserted § 103 grounds, finding a reasonable likelihood of success on at least one claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“institute an inter partes review. The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted unless “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” The Supreme Court has held that the Board, in a decision to institute under 35 U.S.C. § 314(b), may not institute review on less than all claims challenged in the petition. SAS Inst. Inc. v. Iancu, 138 S. Ct. 1348, 1355–56 (2018). Moreover, in accordance with our rules, “[w]hen instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.” 37 C.F.R. § 42.108(a) (2020); see also PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (interpreting the statute to require “a simple yes-or-no institution choice respecting a petition, embracing all challenges included in the petition”). Applying those standards, and upon considering the Petition, the Preliminary Response, and the evidence of record, we determine the information presented shows a reasonable likelihood that Petitioner would prevail in establishing the unpatentability of at least one of the challenged claims of the ’027 patent. Accordingly, we institute an inter partes review of all challenged claims (i.e., 1–3, 5, 7–9, 11–13, and 15–22) of the ’027 patent, based on the grounds asserted in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art would have “possessed an undergraduate degree in chemistry, polymers, materials science, chemical engineering (or related field) and one to two years of experience with constructing and manufacturing tires, tire patches, tire decals/stickers and/or the like.” Pet. 8 (citing Ex. 1003 ¶¶ 6–11). According to Petitioner, “Additional education could compensate for less practical experience. Conversely, additional practical experience could compensate for less education.” Id. Patent Owner does not provide an alternate definition, but, “Patent Owner does not acquiesce to, and reserves the right to address, [Petitioner’s] definition of a POSA.” Prelim. Resp. 6 n.6. Petitioner’s proposed definition appears to be consistent with the disclosure of the ’027 patent, and we adopt it for purposes of this Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that the prior art itself may “reflect[] an appropriate level” of ordinary skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“Having considered the record, we determine that no express claim construction is necessary for any claim terms. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 10
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Instituted
“We disagree with Patent Owner’s contentions that these disclosures indicate that Wilson’s patch would not meet the construction of “barrier material composition.” None of these disclosures even suggests that the base of Wilson’s patch is rigid as Patent Owner suggests. To begin with, the fact that the housing is “more rigid” provides no information about the absolute rigidness of the patch. See Ex. 1009, 9:16–21. As for the disclosure that the patch is contoured (id. at 3:35–67), Patent Owner provides only attorney argument to support its contention that the contour demonstrates that Wilson’s patch must be so rigid that it cannot be meet the claim limitation. In contrast, Petitioner demonstrates that Wilson discloses using the exact same materials described in the challenged patent (see Ex. 1001, 6:33–58 (noting “[e]lastomeric materials useful for forming the intermediate layer 24 include but are not limited to gum rubber, vulcanized natural rubber SBR . . . or comparable materials”); Ex. 1009, 3:49–55 (noting the patch may be constructed from natural rubber (NR), a preferred mixture of chlorobutyl rubber and natural rubber (CR/NR), or a preferred mixture of SBR and natural rubber (SBR/NR)), and provides detailed testimony from its expert to support its contentions (see Ex. 1003 ¶¶ 114–119). On the current record, we find Petitioner’s reasoning and evidence to be persuasive, and find that Petitioner has shown sufficiently that Willson discloses or teaches this limitation.” slip op. at 20
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,124,027 - Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.Institution deniedPTAB · Aug 12, 2025 · IPR2025-00294 · APJ Kimberly Mcgraw · IPR · Institution
The Board denied institution because Patent Owner statutorily disclaimed all challenged claims: claims 6, 7, 10, and 20.
RulingsInstitution decision- Adverse judgmentAdverse judgmentDenied
“A disclaimer is “recorded” pursuant to 35 U.S.C. § 253(a) on the date that the Office receives a disclaimer meeting the above-listed requirements of 37 C.F.R. § 1.321(a) – no further action is required in the Office for a disclaimer to be “recorded.” Vectra Fitness, Inc. v. TNWK Corp., 162 F.3d 1379, 1382 (Fed. Cir. 1998).” slip op. at 3
NonePatents in suitUS 10,886,291 - Micron Technology, Inc. v. Yangtze Memory Technologies Co., Ltd.Institution deniedPTAB · Aug 8, 2025 · IPR2025-00244 · APJ Kimberly Mcgraw · IPR · Institution
The Board denied institution because the petition did not sufficiently show that Costa disclosed or suggested claim 11.H’s required arrangement, and the dependent claims did not cure that deficiency.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“In view of these deficiencies, the Petition fails to identify the proposed grounds for review with particularity as required by 35 U.S.C. § 312(a)(3) with respect to the limitations of independent claim [11.H]. Petitioner presents no arguments or evidence with respect to the dependent claims challenged under this ground that would remedy the defects noted above with respect to independent claim 11. See generally Pet. Thus, Petitioner has failed to demonstrate a reasonable likelihood that the subject matter of claims 11, 12, or 14–19 would have been obvious over Costa.” slip op. at 23
- BurdenDenied
“3. Analysis A petition is required to identify “with particularity[ ] the grounds on which the challenge to each claim is based, and the evidence that supports the grounds for the challenge.” 35 U.S.C. § 312(a)(3). The “petition . . . must include . . . [a] full statement of the reasons for the relief requested, including a detailed explanation of the significance of the evidence”). 37 C.F.R. § 42.22(a)(2). Our rules require that a petition include fully developed arguments. See 37 C.F.R. § 42.22(a)(2) (the “petition . . . must include . . . [a] full statement of the reasons for the relief requested, including a detailed explanation of the significance of the evidence”). The petition must include both an adequate explanation of how the claims should be construed as well as how the construed claims are unpatentable over the asserted prior art. 37 C.F.R. § 42.104(b)(3), (b)(4). Additionally, the “petition must specify where each element of the claim is found in the prior art.” 37 C.F.R. § 42.104(b)(4). A petition should also “explain why a person of ordinary skill in the art would have combined elements from specific references in the way the claimed invention does.” ActiveVideo Networks, Inc. v. Verizon Comm'ns, Inc., 694 F.3d 1312, 1328 (Fed. Cir. 2012). Thus, based on our rules, we only consider fully developed arguments set forth in the petition.” slip op. at 16
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITANot reached
“arguments. See, e.g., id. at 34–35 (arguing that “on” does not require overlap in the Z direction but “includes both objects that are merely touching (in any dimension) and objects that are in proximity to each other but not touching” (citing Ex. 1078, 1; Ex. 1001, 8:3–12)); see also id. at 36–38 (arguing that if “on” is construed to mean “directly on or on with an intermediate feature or layer therebetween,” then Costa’s second stacked layer 232, 242 and third channel structure (173) are “directly on” each other, because their edges are directly touching each other). The Petition, however, does not clearly present any of the claim construction arguments set forth in the Opposition Brief. See Paper 22 (not clearly identifying where the Petition provides the proposed claim construction); see generally Pet.; see also Pet. 33, 43, 56 (arguing “on” does not require “directly on” and permits intermediate layers but not presenting any of the other claim construction arguments set forth in the Opposition Brief). Nor did the Petition provide any particularized argument as to how Costa discloses or suggests a second stacked layer disposed on the third channel structure applying any of the claim constructions proposed in the Opposition Brief. See generally Pet. (presenting no argument that Costa’s second stacked layer 232, 242 is “on” semiconduction portion layer 173 (the asserted third channel structure) because they touch each other as shown above in Petitioner’s annotation of Costa Figure 21A). We will not consider any arguments not sufficiently set forth in the Petition. See 37 C.F.R. § 42.104(b)(3) (“the petition must set forth . . . [h]ow the challenged claim is to be construed”); 37 C.F.R. § 42.104(b)(4) (“the petition must set forth . . . [h]ow the construed claim is unpatentable”).” slip op. at 19
- Parallel petitionsNot reached
“Because we determine that Petitioner did not show a reasonable likelihood that it would prevail on the merits, we do not address Patent Owner’s parallel petitions argument.” slip op. at 23
Claim constructionDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 10,886,291 - Micron Technology, Inc. v. Yangtze Memory Technologies Co., Ltd.Institution deniedPTAB · Aug 8, 2025 · IPR2025-00245 · APJ Michael T Cygan · IPR · Institution
Institution was denied because Petitioner did not show a reasonable likelihood that claims 11, 13, and 15–17 would have been obvious over Costa or Costa and Oh.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“§ 42.4(a), we may only institute an inter partes review when “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a); see also 37 C.F.R. § 42.108(c). Based upon our review of the present record, Petitioner has not sufficiently shown a reasonable likelihood it will prevail with respect to at least one of the challenged claims. Accordingly, we do not institute inter partes review.” slip op. at 2
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner states that none of the claims require express construction and the claims should receive their plain and ordinary meaning. Pet. 23. Patent Owner argues that no claim construction is necessary for the institution determination, and that the Petition “still fails if the claim term ‘on’ receives its plain and ordinary meaning -- e.g., physically in contact with or directly on top of with intervening objects therebetween.” Prelim. Resp. 20 (citing Ex. 2006 ¶ 66). Although Patent Owner argues that Petitioner has construed “on” as including indirectly on; i.e., where there is no physical contact, the Petition addressed now-disclaimed claim 18, and the Petition does not advance any construction for the remaining claims. See id. at 16–17 (citing Pet. 92; Ex. 1003 ¶ 258). Consequently, we determine that no construction is required to resolve the issues for institution.” slip op. at 7
- Skill levelSkill level petitioner adoptedOther
“we consider the level of ordinary skill at the time of filing. 35 U.S.C. § 103; see also Graham v. John Deere Co., 383 U.S. 1, 17 (1966) (discussing pre- AIA obviousness). Petitioner contends that a person of ordinary skill in the art (“POSITA”) would have had “a bachelor’s degree in electrical engineering or a similar discipline, along with 2–3 years of professional experience working with (e.g., researching, designing, or teaching) monolithic 3D structures and NAND memory devices, or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace 1 The Leahy-Smith America Invents Act, Pub. L. No. 112-29, 125 Stat. 284 (2011) (“AIA”), amended 35 U.S.C. § 103. The earliest claimed priority date for the ’241 patent is after the effective date of the applicable AIA amendment. See Ex. 1001, (63). Thus, we refer to the AIA version of 35 U.S.C. § 103. 2 Costa, US 2018/001282771 (filed Feb. 28, 2017, published June 28, 2018) (Ex. 1005, “Costa”). 3 Oh, US 2017/0154892 A1 (filed June 10, 2016, published June 1, 2017) (Ex. 1006, “Oh”). some of the professional experience). Pet. 23–24. Petitioner also asserts that a POSITA “would have been aware of and generally knowledgeable about 3D NAND’s structure, how it is manufactured, and its component parts.” Id. (citing Ex. 1003 ¶¶ 36–40). Patent Owner does not take a position on the level of ordinary skill in the art. Prelim. Resp. 11; see also Ex. 2006 ¶ 34 (applying Petitioner’s definition of a POSITA to the opinions set forth in the declaration but reserving the right to opine to an alternative level of a POSITA). At this stage of the proceeding, we adopt Petitioner’s definition of a POSITA as it appears consistent with the level of ordinary skill in the art that is reflected by the prior art of record.” slip op. at 6
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“We agree with Patent Owner that the Petition fails to sufficiently show that Costa teaches a “second stacked layer disposed on the third channel structure” as required by apparatus claim element [11.E]. The Petition asserts that Costa’s second alternating stack 232, 242 is formed “on the top surface of joint-level material layers.” Pet. 64. However, Costa refers to the term “joint-level material layers” as representing layers 175–177, not the asserted third channel structure 173. Ex. 1005 ¶¶ 166, 178, 184–85; see Ex. 2006 ¶ 77. Thus, under Petitioner’s characterization, which is consistent with Costa, Costa’s second alternating stack is not formed on the third channel structure, but instead, “on the top surface of the joint level material layers” that surround the third channel structure. Because Petitioner has not explained how a second alternating stack on the surface of the joint material layers teaches a second alternating stack disposed on the third channel structure, Petitioner has not met its obviousness burden for limitation [11.E].” slip op. at 11
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,482,532
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.