- Apple Inc. v. Resonant Systems, Inc.All claims unpatentablePTAB · Oct 9, 2025 · IPR2024-00807 · APJ Karl D Easthom · IPR · Final written decision
Claims 2 and 3 are unpatentable under § 103 over Gregorio, Ramsay, Tierling, Rossi, and Aldrich; claim 2 is also unpatentable over Gregorio, Ramsay, Wakuda, Rossi, and Aldrich.
RulingsFinal written decision- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for petitioner
“The parties agree that independent claim 2 includes means-plus- function limitations under 35 U.S.C. § 112 ¶ 6.8 Pet. 2–6; PO Resp. 7–15. An element in a claim for a combination may be expressed as a means . . . for performing a specified function without the recital of structure, material, or acts in support thereof, and such claim shall be construed to cover the corresponding structure, material, or acts described in the specification and equivalents thereof. 35 U.S.C. § 112 ¶ 6. In particular, the parties agree that the “driving component” and “control component” requirements of independent claim 2 are means-plus-function limitations. Pet. 2–6; PO Resp. 7. Construing a means-plus-function limitation under 35 U.S.C. § 112 ¶ 6 involves two steps: 1) identifying the claimed function and 2) identifying in the specification the corresponding structure that performs the claimed function. Med. Instrumentation & Diagnostics Corp. v. Elekta AB, 344 F.3d 1205, 1210 (Fed. Cir. 2003); Cardiac Pacemakers, Inc. v. St. Jude Med., Inc., 296 F.3d 1106, 1119 (Fed. Cir. 2002).” slip op. at 10
- Claim Construction › Functional claiming / §112(f) means-plus-function › Corresponding structure / algorithm (indefinite if none)Term construed petitioner constructionDecided for petitioner
“1. Construction of “Driving Component” Petitioner contends that the claimed function of “driving component” is “drives the moveable component to oscillate within the housing.” Pet. 5; Ex. 2002, 2. Petitioner asserts that the corresponding structure is a coil of conductive wire 420” (Figures 4A–4G); “coil 514” (Figures 5A–5B); “coil 626” (Figure 6); “electromagnet” (Figures 10-11); “additional coils 1202 and 1204” (Figure 12); “coils 1302 and 1304” (Figure 13); “driving coils 1412 and 1414” (Figure 14); “coil 1510” (Figures 15–17); “stator coils” (Figures 24A-25). Pet. 5–6 (citing Ex. 1001, 5:2–34, 5:54–59, 6:32–35, 9:11–52, 9:64–10:22, 14:59); Ex. 2002, 2.). Patent Owner states that it “does not believe that the phrase involving a ‘driving component’ needs to be construed in order to resolve any issue in this proceeding.” PO Resp. 7. Patent Owner agreed to the above construction in the Apple Litigation, and the court adopted this construction. Ex. 2002, 2. The record supports Petitioner’s position and we adopt it.” slip op. at 11
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner’s expert declarant contends that a person of ordinary skill in the art (POSITA) would have had a degree in mechanical engineering, electrical engineering, physics, or a related technical field, and at least 2–3 years of experience related to the design or development of systems incorporating linear actuators; additional years of experience could substitute for the advanced-level degree. Ex. 1003 ¶ 30. Patent Owner offers “a similar level of ordinary skill in the art.” See PO Resp. 4. Based on a review of the record, we adopt Petitioner’s proposed level of ordinary skill in the art because it is consistent with the evidence of record, including the asserted prior art and ’337 patent specification.” slip op. at 9
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“In contrast to Petitioner’s showing, at the passage cited by Patent Owner, Dr. Goossen, Patent Owner’s expert, does not provide a basis for his opinion that “the combined system of Gregorio-Ramsay-Rossi-Aldrich does not teach the claimed output to the power supply.” Ex. 2009 ¶ 156; PO Resp. 21 (citing Ex. 2009 ¶ 156). To the extent Dr. Goossen addresses the issue, like Patent Owner, Dr. Goossen concedes that “a POSITA would recognize in the [annotated drawing of Gregorio supplied by Petitioner] that a power supply is required that is not shown.” Ex. 2009 ¶ 116. And also like Patent Owner, Dr. Goossen concludes that Petitioner’s rationale that an “unshown power supply receives a signal from the processor is a sweeping conclusion that does not follow.” Id. For the reasons discussed above in connection with Patent Owner’s parallel arguments, this testimony is conclusory and unsupported. Primarily, it does not adequately address Petitioner’s showing and Dr. Hannaford’s testimony, discussed above, which relies on Gregorio’s statement that “[p]rocessor 12 outputs the control signals to drive circuit 26 which includes electronic components and circuitry used to supply LRA 18 with the required electrical current and voltage to cause the desired haptic effects.” Ex. 1004, 2:36–39 (emphases added). Dr. Goossen and Patent Owner also do not address the initial finding in the Institution Decision that “[t]he ’337 patent does not disclose any detail or structure for the controllable power supply, indicating that such a controllable power supply was well-known.” Inst. Dec. 30 (citing Ex. 1001, 6:33–35 (“The power supply 612 receives a control input 624 from the CPU to control the current supplied to the H-bridge switch for transfer to the coil 626.”)).16 And while Dr. Goossen contends that Dr. Hannaford’s reliance on Ramsay to further suggest control of the power supply is conclusory because “Dr. Hannaford’s statement about ‘the current provided from a power supply to the driving component’ has nothing to do with Ramsay’s disclosure,’” Dr. Goossen addresses Ramsay and Gregorio in isolation, without adequately addressing the combination, specifically where Gregorio teaches or suggests controlling a power supply in order to provide desired LRA amplitude and frequency haptic effects, which is in line with Ramsay’s teaching of user-customizable parameters to control amplitude and frequency for the same purpose. See Ex. 2009 ¶ 126; Pet. 53–54 (summarized above). Therefore, the Petition shows persuasively that Gregorio’s processor controls Gregorio’s power supply to provide power to its haptic unit or that such power supply control would have been obvious in view of Ramsay in order to allow a user to control the desired haptic effect.” slip op. at 41
Patent outcomesUS 8,860,337 unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 8,860,337 - PTAB · Oct 6, 2025 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Institution
The Board instituted IPR of claims 1–10, 12, 13, 19, and 20 on all petition grounds after finding a reasonable likelihood that claim 1 was obvious over Douglas and Mark.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“A claim is unpatentable under § 103 “if the differences between the claimed invention and the prior art are such that the claimed invention as a whole would have been obvious before the effective filing date of the claimed invention to a person having ordinary skill in the art to which the claimed invention pertains.” 35 U.S.C. § 103; see KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 406 (2007). When a ground in a petition is based on a combination of references, we consider “whether there was an apparent reason to combine the known elements in the fashion claimed by the patent at issue.” KSR, 550 U.S. at 418 (citing In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006)).” slip op. at 8
- Skill levelSkill level petitioner adoptedDecided for petitioner
“The parties agree that experience could substitute for a degree, and vice versa. Pet. 3 (citing Ex. 1003 ¶¶ 19–21); Prelim. Resp. 9. The parties’ proposed levels of ordinary skill are substantially similar. Although we discern no difference in the outcome of this decision from choosing one over the other, we adopt Petitioner’s proposal for this decision. Only Petitioner’s proposed level is supported by testimonial evidence on the preliminary record, and it appears to be consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Therefore, we adopt Petitioner’s proposal for this decision.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“CLAIM CONSTRUCTION B. In an IPR, we construe a patent claim “using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. 282(b).” 37 C.F.R. § 42.100(b). This generally includes “construing the claim in accordance with the ordinary and customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” Id. The ordinary and customary meaning of a claim term “is its meaning to the ordinary artisan after reading the entire patent,” and “as of the effective filing date of the patent application.” Phillips, 415 F.3d at 1313, 1321. Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; Prelim. Resp. 9. However, the parties’ positions depend on interpreting the claim language in a particular way, and we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“At this stage, we find Petitioner’s arguments persuasive and disagree with Patent Owner. Patent Owner appears to equate a “fabrication profile” with a toolpath description, but nothing in the plain language of claim 1 supports that narrow interpretation. The ’774 patent describes a “fabrication profile” broadly and states that the profile can simply “include the dictionary [of configuration information],” or be “used to determine which machineready representation is available or suitable for a target printer.” Ex. 1001, 23:49–52. The preliminary evidence suggests that Douglas’s “operational parameters” would count as a “fabrication profile” because it is “the basis for generation of a machine-ready representation of the three-dimensional model that is executable on the target printer.” Id. at 23:37–39; see infra Section III.C.8. We also disagree that Petitioner’s argument is impermissible hindsight, because it is based on the disclosures in Douglas and Mark, and Petitioner has articulated a sufficiently persuasive reason to combine those references without referring to the ’774 patent itself. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”). Finally, Petitioner appears to rely on Mark for providing a particular example of a fabrication profile, not to replace Douglas’s overall system in which the 3D printer can receive “operational parameters” rather than just G-code. See Pet. 8–10, 17–23; see also Ex. 1005 ¶ 41 (the print queue, which stores tool instructions, may be maintained locally on printers 204 or on print servers 208); see In re Mouttet, 686 F.3d 1322, 1332 (Fed. Cir. 2012) (“[A] determination of obviousness based on teachings from multiple references does not require an actual, physical substitution of elements.” (citing In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc))).” slip op. at 19
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,886,774 - PTAB · Oct 6, 2025 · IPR2025-00423 · APJ Zhenyu Yang · IPR · Institution
The Board instituted IPR on claims 1–4 and 6–29 on all asserted grounds, finding a reasonable likelihood of unpatentability based on the asserted obviousness and anticipation challenges.
RulingsInstitution decision- PTAB / AIA Trials › §315(b) time barNot time barredDecided for petitioner
“After reviewing the evidence of record, we are persuaded the instant Petition is not time-barred as to the Chem-Mod Purchasers. Generic indemnity agreements are insufficient, without more, to establish privity. WesternGeco LLC, 889 F.3d at 1321 (“a contractual and fairly standard customer-manufacturer relationship regarding the accused product” does not suggest, “without more, that the parties were litigating . . . [an] IPR[] as proxies for the other.”). The only relationship alleged to exist between Chem-Mod, its affiliates, and the Chem-Mod Purchasers is that of a supplier-customer relationship. As part of that relationship, the parties entered into supply agreements that included an indemnification provision for the purchased products. Exs. 2037–2042 (discussed at Sur-reply 7–8).” slip op. at 12
- PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner
“In sum, Petitioners bear the burden of demonstrating compliance with 35 U.S.C. § 312(a)(2) and § 315(b), but the current record does not provide sufficient reason to doubt Petitioners’ assertion that Chem-Mod was not “funding this petition, advising on strategy for this petition, or exercising any control over Petitioners’ decision to file the petition (or the arguments included therein).” Pet. 2; see also Reply 2. Indeed, the current record supports that the relationship between Chem-Mod and the Chem-Mod Purchasers was a standard supplier/customer relationship. Exs. 2037–2042. The evidence does not support that Chem-Mod negotiated a license on behalf of the Chem-Mod Purchasers or that the Chem-Mod purchasers owned power plants that were at issue in the Delaware Litigation. Ex. 2009, 91; Ex. 2010, 107. Therefore, on this record, we determine that the relationship between Chem-Mod and the Chem-Mod Purchasers does not support that the Petition is time-barred.” slip op. at 16
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“inter partes review may not be instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a).” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“engineering, mechanical engineering, or a related field of study with at least two years of experience implementing pollution control in power generation plants for natural gas, coal, and/or industrial waste incineration.” Pet. 11–12 (citing Ex. 1002 ¶¶ 48–51). Patent Owner does not dispute the level of ordinary skill in the art. See generally Prelim Resp. For purposes of this Decision, we adopt Petitioners’ proposed definition of a POSITA because it is consistent with the skill level reflected in the disclosures of the ’430 patent and prior art. See Okajima, 261 F.3d at 1355 (the prior art may reflect an appropriate level of skill in the art).” slip op. at 21
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites PhillipsPatents in suitUS 10,668,430 - PTAB · Oct 6, 2025 · IPR2025-00422 · APJ Zhenyu Yang · IPR · Institution
Instituted IPR on claims 1–4 and 6–29 on all asserted grounds, finding a reasonable likelihood of prevailing on the asserted anticipation and obviousness challenges.
RulingsInstitution decision- PTAB / AIA Trials › Real party in interest / privityNot time barredDecided for petitioner
“Petition is not time-barred as to the Chem-Mod Purchasers. Generic indemnity agreements are insufficient, without more, to establish privity. WesternGeco LLC, 889 F.3d at 1321 (“a contractual and fairly standard customer-manufacturer relationship regarding the accused product” does not suggest, “without more, that the parties were litigating . . . [an] IPR[] as proxies for the other.”). The only relationship alleged to exist between Chem-Mod, its affiliates, and the Chem-Mod Purchasers is that of a supplier-customer relationship. As part of that relationship, the parties entered into supply agreements that included an indemnification provision for the purchased products. Exs. 2037–2042 (discussed at Sur-reply 8–9).” slip op. at 12
- PTAB / AIA Trials › §315(b) time barNot time barredDecided for petitioner
“are unpatentable, which includes the burden of establishing that any reference upon which it relies constitutes prior art under 35 U.S.C. § 102. See 35 U.S.C. § 316(e); Mahurkar v. C.R. Bard, Inc., 79 F.3d 1572, 1576 (Fed. Cir. 1996) (holding that a patent challenger “bore the burden of persuasion . . . on all issues relating to the status of [the asserted reference] as prior art”). Here, because Petitioners initially show Downs-Boiler qualifies as prior art on its face, Patent Owner bears the subsequent procedural burden to produce evidence antedating the reference. See Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1378–80 (Fed. Cir. 2015); Magnum Oil, 829 F.3d at 1375. Although the burden of production can be a shifting burden, the burden of persuasion is on Petitioners to ultimately prove “unpatentability by a preponderance of the evidence,” and that this burden never shifts to Patent Owner. Dynamic Drinkware, 800 F.3d at 1378.” slip op. at 37
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioners assert that “[a] person of ordinary skill in the art [“POSITA”] would have at least a bachelor’s degree in chemical engineering, mechanical engineering, or a related field of study with at least two years of experience implementing pollution control in power generation plants for natural gas, coal, and/or industrial waste incineration.” Pet. 12 (citing Ex. 1002 ¶¶ 48–51). Patent Owner does not dispute the level of ordinary skill in the art. See generally Prelim Resp. For purposes of this Decision, we adopt Petitioners’ proposed definition of a POSITA because it is consistent with the skill level reflected in the disclosures of the ’430 patent and prior art. See Okajima, 261 F.3d at 1355 (the prior art may reflect an appropriate level of skill in the art).” slip op. at 20
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b).” 37 C.F.R. § 42.100(b). Under that standard, the words of a claim “are generally given their ordinary and customary meaning,” which is “the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention, i.e., as of the effective filing date of the patent application.” Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc). Claim terms need only be construed to the extent necessary to resolve the controversy. Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011). On this record and for purposes of this Decision, we see no need to construe any claim term expressly.” slip op. at 21
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSRPatents in suitUS 10,668,430 - PTAB · Oct 3, 2025 · IPR2025-00680 · APJ Karl D Easthom · IPR · Institution
The Board instituted IPR of claims 2 and 3 on all grounds in the Petition and granted Nintendo’s motion to join IPR2024-00807, subject to participation limits.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“II. ANALYSIS A. Institution of Inter Partes Review We instituted an inter partes review in the Apple IPR on all challenged claims and all asserted grounds of unpatentability. Apple IPR, Paper 10 (institution decision); see also Apple IPR, Paper 2 (the “Apple Petition”). Petitioner here challenges the same claims and asserts the same grounds of unpatentability as those on which we instituted the Apple IPR. Compare Pet. 2, with Apple Petition 1; see also Mot. 1 (asserting the instant “Petition is substantively identical to Apple Inc.’s petition (‘Apple Petition’) in the Apple IPR, including that it relies on the same expert declaration,” and asserting “the same grounds presented in the Apple IPR”). As indicated, Petitioner also relies on the same declarant as did the petition in the Apple IPR. Mot. 1; compare Ex. 1003 (Hannaford Declaration), with Apple IPR, Ex. 1003 (same). Because the grounds of unpatentability in the instant Petition are identical to those in the Apple IPR and for the same reasons stated in our Decision to Institute in the Apple IPR, we institute inter partes review in this proceeding on the grounds presented in the Petition. See Apple IPR, Paper 10 (analyzing challenges in the Apple Petition).” slip op. at 7
- PTAB / AIA Trials › Joinder §315(c) / SAS all-or-nothingJoinder, grantedGranted
“We determine that Petitioner has met its burden of showing that joinder is appropriate because, as set forth above, the Petition (1) is substantially identical to the Apple Petition, (2) contains the same grounds based on the same evidence, and (3) relies on the same declaration, the Hannaford Declaration (Ex. 1003). Mot. 1, 4. Petitioner represents that “joinder will not negatively impact the Apple IPR trial schedule” and “expressly consents to the existing trial schedule.” Id. at 10; see also id. at 7 (“Proceeding with a consolidated inter partes review would avoid potential inconsistency, promote efficient review of the same claims for the same patent under the same grounds, and would result in a final written decision without delay.”). Petitioner also represents that as “long as Apple remains in the joined IPR, Nintendo remains in a limited ‘silent understudy’ role that does not actively participate in the IPR.” Id. at 8. The record supports Petitioner. In addition, the final written decision in the Apple IPR is due to issue on or before October 15, 2025, with the Oral Hearing complete and no further briefing due. See IPR 2024-00807, Paper 15 (Oral Hearing Transcript); Paper 18, 2–3. Therefore, as Petitioner argues, joinder by Petitioner will have little or no impact on the trial schedule in the Apple IPR. On the other hand, if the Board denies joinder, Petitioner submits that it “intends to file a separate petition for IPR (‘Second Petition’) that includes grounds in addition to some (or all) of the grounds in the Apple IPR.” Mot. 14.” slip op. at 10
NonePatents in suitUS 8,860,337 - PTAB · Sep 15, 2025 · IPR2025-00632 · APJ Mitchell G Weatherly · IPR · Institution
The Board instituted IPR on all challenged claims and grounds, finding a reasonable likelihood that claims 1, 2, 7–9, 11, 12, and 20–24 are obvious over Yamaguchi-727.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Cerebrum Sensor Technologies, Inc. (“Patent Owner”) timely filed a Preliminary Response. Paper 9 (“Prelim. Resp.”).1 Institution of an inter partes review is authorized by statute when “the information presented in the petition filed under section 311 and any response filed under section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Based on our review of the record, we conclude that Petitioner is reasonably likely to prevail with respect to at least one of the challenged claims.” slip op. at 2
- BurdenInstituted
“We disagree. Positioning module 6 to face a “predetermined direction” is a form of preventing movement that falls within the scope of limitation 1b. Moreover, Yamaguchi-727 uses a method for preventing movement of its module 6 in its housing 20, silicone potting material, that is expressly recognized by the Specification of the ’421 patent when it states: “A common technique used to assist in fixturing the electrical sensor device 40 known within the automotive industry is to fill the internal cavity with a coating material such as a neutral silicone or the like for purposes of retaining placement position.” Ex. 1001, 13:56–60. Although the Specification also asserts that the sensor assemblies disclosed in the 421 patent “do not use or require the use of any such coating or filing agents or materials for any fixturing of the electrical sensor device 40,” id. at 13:61–64, limitation 1b merely requires that the “sensor device . . . is disposed within the internal cavity and attached therein to prevent movement of the device within the internal cavity,” id. at 30:25–27. Absent a persuasive argument to the contrary, we preliminarily conclude that Yamaguchi-727’s use of potting material to hold its module 6 in place within its housing 20 meets the requirements of limitation 1b. Both parties are encouraged to adduce intrinsic evidence relating to the meaning of limitation 1b at trial. For all the reasons set forth above, we find that Petitioner has established a reasonable likelihood of proving the Yamaguchi-727 renders claim 1 unpatentable as obvious. 2. Dependent Claims 2, 7–9, 11, 12, and 20–24 Petitioner identifies the portions of Yamaguchi-727 that teach the limitations introduced in dependent claims 2, 7–9, 11, 12, and 20–24, all of which ultimately depend from claim 1. Pet. 32–40. Patent Owner relies upon its argument that Petitioner’s showing for claim 1 is deficient as the reason why Petitioner’s challenge to dependent claims 2, 7–9, 11, 12, and 20–24 fails. We reject this argument for the reasons stated in Part II.C.1 above. Based on our review of Petitioner’s otherwise uncontested argument and evidence cited in support, we find that Petitioner also establishes a reasonable likelihood of proving that Yamaguchi-727 renders dependent claims 2, 7–9, 11, 12, and 20–24 unpatentable as obvious. D. Remaining Challenges” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“Petitioner complies with the requirement of identifying “[h]ow the claim language is to be construed” by setting forth proposed interpretations of various claim terms in the table above.7 Both cases cited by Patent Owner relate to an issue presented by a petitioner’s alleged inconsistent handling of whether a claim term is subject to interpretation as a means-plus-function element under 35 U.S.C. § 112(f). Orthopediatrics Corp. v. K2M, Inc., IPR2018-01546, Paper 10 at 11 (PTAB Feb. 14, 2019); 10x Genomics, Inc. v. President and Fellows of Harvard College, IPR2023- 7 Neither party has identified any claim language that might invoke interpretation as a means-plus-function limitation, and we discern no such claim language. Additionally, we do not imply that a petitioner must always propose express interpretations for specific claim language to comply with Rule 42.104(b)(3). Rather, we only note that Petitioner has, by any measure, complied by expressly proposing interpretations for identified claim language.” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“We disagree. Positioning module 6 to face a “predetermined direction” is a form of preventing movement that falls within the scope of limitation 1b. Moreover, Yamaguchi-727 uses a method for preventing movement of its module 6 in its housing 20, silicone potting material, that is expressly recognized by the Specification of the ’421 patent when it states: “A common technique used to assist in fixturing the electrical sensor device 40 known within the automotive industry is to fill the internal cavity with a coating material such as a neutral silicone or the like for purposes of retaining placement position.” Ex. 1001, 13:56–60. Although the Specification also asserts that the sensor assemblies disclosed in the 421 patent “do not use or require the use of any such coating or filing agents or materials for any fixturing of the electrical sensor device 40,” id. at 13:61–64, limitation 1b merely requires that the “sensor device . . . is disposed within the internal cavity and attached therein to prevent movement of the device within the internal cavity,” id. at 30:25–27. Absent a persuasive argument to the contrary, we preliminarily conclude that Yamaguchi-727’s use of potting material to hold its module 6 in place within its housing 20 meets the requirements of limitation 1b. Both parties are encouraged to adduce intrinsic evidence relating to the meaning of limitation 1b at trial. For all the reasons set forth above, we find that Petitioner has established a reasonable likelihood of proving the Yamaguchi-727 renders claim 1 unpatentable as obvious. 2. Dependent Claims 2, 7–9, 11, 12, and 20–24 Petitioner identifies the portions of Yamaguchi-727 that teach the limitations introduced in dependent claims 2, 7–9, 11, 12, and 20–24, all of which ultimately depend from claim 1. Pet. 32–40. Patent Owner relies upon its argument that Petitioner’s showing for claim 1 is deficient as the reason why Petitioner’s challenge to dependent claims 2, 7–9, 11, 12, and 20–24 fails. We reject this argument for the reasons stated in Part II.C.1 above. Based on our review of Petitioner’s otherwise uncontested argument and evidence cited in support, we find that Petitioner also establishes a reasonable likelihood of proving that Yamaguchi-727 renders dependent claims 2, 7–9, 11, 12, and 20–24 unpatentable as obvious. D. Remaining Challenges” slip op. at 11
Claim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,835,421 - LG Energy Solution, Ltd. v. Molecular Rebar Design, LLCAdverse judgmentPTAB · Sep 2, 2025 · IPR2025-00355 · APJ Avelyn Ross · IPR · Adverse judgment
The Board entered adverse judgment against Patent Owner after it disclaimed claims 1–23, terminated the IPR, and cancelled the scheduled hearing.
RulingsAdverse judgment- Adverse judgmentAdverse judgmentGranted
“Under our rules, a party may request adverse judgment against itself at any time during a proceeding, and we construe a disclaimer of all claims involved in a trial as a request for adverse judgment. 37 C.F.R. §42.73(b). Because Patent Owner has disclaimed all challenged claims, and has requested adverse judgment, we determine that it is appropriate to enter adverse judgment against Patent Owner pursuant to 37 C.F.R. § 42.73(b) and to terminate this proceeding. Under these circumstances, we grant Patent Owner’s Motion, and grant Patent Owner’s request that the hearing in this matter, scheduled for September 15, 2025, be cancelled.” slip op. at 2
NonePatents in suitUS 9,636,649 - LG Energy Solution, Ltd. v. Molecular Rebar Design, LLCAdverse judgmentPTAB · Sep 2, 2025 · IPR2024-01005 · APJ Avelyn Ross · IPR · Adverse judgment
The Board entered adverse judgment against Patent Owner, terminated review of claims 1–23, and cancelled the scheduled hearing after Patent Owner disclaimed all challenged claims.
RulingsAdverse judgment- Adverse judgmentAdverse judgmentGranted
“Under our rules, a party may request adverse judgment against itself at any time during a proceeding, and we construe a disclaimer of all claims involved in a trial as a request for adverse judgment. 37 C.F.R. §42.73(b). Because Patent Owner has disclaimed all challenged claims, and has requested adverse judgment, we determine that it is appropriate to enter adverse judgment against Patent Owner pursuant to 37 C.F.R. § 42.73(b) and to terminate this proceeding. Under these circumstances, we grant Patent Owner’s Motion, and” slip op. at 2
NonePatents in suitUS 9,636,649 - Adc Solutions Auto LLC v. The Noco CompanyAll claims unpatentablePTAB · Aug 26, 2025 · IPR2024-00671 · APJ Avelyn M Ross · IPR · Final written decision
Claims 1, 2, 15, 17, 18, 51, 54, and 57 are unpatentable as obvious over the asserted combinations of Richardson, Zhao, Yu, Paparrizos, and Dao.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“claimed priority date of July 3, 2014, would have been a person with at least a bachelor’s degree in electrical engineering or its equivalent and at least two years of experience in the field of electrical engineering including some experience with DC power supply or battery charger design[;] . . . [l]ess work experience could be compensated for by a higher level of education, such as a master’s degree, and vice versa.” Pet. 17–18 (citing Ex. 1003 ¶¶ 41–44; Ex. 1014, 10–11). Patent Owner “does not propose a different level of skill in the art.” PO Resp. 19. In light of the record before us, and for purposes of this Decision, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’243 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand the ’243 patent and the prior art.” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“As neither party proposes an express construction for our consideration and because we determine that claim construction is not necessary to decide whether to institute, we do not expressly construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“We agree with Petitioner that the skilled artisan would have had reason to combine the teachings of Richardson and Zhao to achieve the subject matter of claim 1. For example, Petitioner contends that a person of ordinary skill in the art would have modified Richardson’s system to include the USB input circuit of Zhao “to avoid the need to supply a proprietary charger or other type of AC ‘power brick’ that would be less ubiquitous or less standardized,” increase flexibility and convenience, and cater to consumer demand for USB technology. Pet. 36 (citing Ex. 1003 ¶¶ 88–89). Petitioner further alleges that the addition of a USB input circuit would provide for an alternative where traditional charging methods are lost, damaged, or otherwise unavailable. Id. at 35 (citing Ex. 1003 ¶ 88). Thus, Petitioner has provided sufficient reasoning with rational underpinnings to explain why a person of ordinary skill in the art would have modified the teachings of the applied references. See KSR, 550 U.S. at 418.” slip op. at 21
- Expert testimonyPetitioner expert creditedDecided for petitioner
“Ex. 1005 ¶ 28 (emphasis added). Dr. MacCarley testifies that a person of ordinary skill in the art would have known what external battery charger could have been used and where to place it in Richardson’s system. Ex. 1044 ¶ 13. In particular, Dr. MacCarley explains that there are numerous points in the circuitry disclosed by Richardson where a charging pathway from an external battery charger (e.g. the “battery charger” that Richardson explains is “not shown”, EX1005, ¶ [0028]) could be connected to charge Richardson’s batteries. EX2010, 52:3–54:5. Any of these connection points would be a trivial modification of Richardson’s embodiment. A PHOSITA would have understood how to implement this type of well-known configuration of an external battery charger and associated charging circuitry, which would have been as simple as wiring connections to the terminal anode and cathode of the batteries. The simplicity of this connection is why it is not surprising that Richardson describes such a pathway and leaves it “not shown” in the figures. Id. We credit the testimony of Dr. MacCarley in this regard. Moreover, Dr. Fayed confirms that it was known to recharge a jump starter with a barrel charger. Ex. 2014 ¶ 23.” slip op. at 28
Patent outcomesUS 11,584,243 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,584,243 - Adc Solutions Auto LLC v. The Noco CompanyAll claims unpatentablePTAB · Aug 26, 2025 · IPR2024-00577 · APJ Avelyn M Ross · IPR · Final written decision
Claims 1, 32, 38, 39, 47, 52, and 54 are unpatentable as obvious over Richardson and Zhao and over Yu and Paparrizos.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art, as of the claimed priority date of July 3, 2014, would have been a person with at least a bachelor’s degree in electrical engineering or its equivalent and at least two years of experience in the field of electrical engineering including some experience with DC power supply or battery charger design[;] . . . [l]ess work experience could be compensated for by a higher level of education, such as a master’s degree, and vice versa. Pet. 22 (citing Ex. 1003 ¶¶ 39–42; Ex. 1014, 10–11). Patent Owner “does not propose a different level of skill in the art.” PO Resp. 19. In light of the record before us, and for purposes of this Decision, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’023 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand the ’023 patent and the prior art.” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner submits there are no formal claim constructions necessary in this proceeding.” Pet. 23. Patent Owner “does not propose any terms need to be construed.” PO Resp. 18. As neither party proposes an express construction for our consideration and because we determine that claim construction is not necessary to decide whether to institute, we do not expressly construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review). slip op. at 12
- Expert testimonyPetitioner expert creditedDecided for petitioner
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“We agree with Petitioner that the skilled artisan would have had reason to combine the teachings of Richardson and Zhao to achieve the subject matter of claim 1. For example, Petitioner contends that a person of ordinary skill in the art would have modified Richardson’s system to include the USB input circuit of Zhao to avoid the need to supply a proprietary charger or other type of AC ‘power brick’ that would be less ubiquitous or less standardized,” increase flexibility and convenience, and cater to consumer demand for USB technology. Pet 45–46 (citing Ex. 1003 ¶¶ 88– 89). Petitioner further alleges that the addition of a USB input circuit would provide for an alternative where traditional charging methods are lost, damaged. or otherwise unavailable. Id. at 45 (citing Ex. 1003 ¶ 88). Thus, Petitioner has provided sufficient reasoning with rational underpinnings to explain why a person of ordinary skill in the art would have modified the teachings of the applied references. See KSR, 550 U.S. at 418. We acknowledge, but are not convinced by, Patent Owner’s arguments that the nature of Richardson requires the ability to charge a high capacity battery and rapid recharging and therefore would not have led a person of ordinary skill in the art to include Zhao’s USB charging circuit in Richardson. See PO Resp. 25–31. In particular, we are not persuaded that Richardson is limited to high capacity, rapid recharging of batteries as Patent Owner suggests. Instead, Richardson broadly describes “an apparatus and method for temporarily delivering supplemental power to the electrical system of a vehicle” (Ex. 1005 ¶ 6) where “[t]he jump starter 10 may be configured for 12, 18, 24, 30, 36, 42 or 48 volts” (id. ¶ 34). According to Richardson, this may be achieved by using “two or more batteries of the same or different voltage levels . . . to achieve the voltage requirements of the vehicle to be started.” Id. By way of example, Richardson states that “if the batteries 23 are both 12-volt batteries, the system may be configured for 12- or 24-volt operation” and “[i]f the batteries 23 are 12-volt batteries and a battery 25 is a 6-volt battery, 18- or 30-volt configurations may be provided.” Id. Neither Richardson’s claims nor its specification require any particular charging capacity or charging time. See generally Ex. 1005. While a single, near-final paragraph of Richardson introduces the concept of rapid charging of the jump starter batteries to charge a fleet of vehicles, Richardson characterization is permissive or optional. For example, Richardson states The charging system of the vehicle may be used to charge the capacitors 21 and jump starter batteries 22. . . . This allows the capacitors 21 and jump starter batteries 22 to be fully recharged in about 1 to 5 minutes and can therefore start many vehicles in a row without becoming discharged. Id. ¶ 55 (emphasis added). We do not view this singular occurrence as supplanting the breadth of Richardson’s complete disclosure. Furthermore, the crux of Patent Owner’s argument is that because of Richardson’s goal of charging high capacity batteries a USB charger would require significant charging time. PO Resp. 29; Sur-reply 2–14 But, nowhere does Patent Owner allege that a USB charger would not work given sufficient time.11 See generally PO Resp. and Sur-reply. And, when faced with no alternative, the person of ordinary skill in the art must balance the trade-offs and consider charging slowly, or not at all. Medichem, S.A. v. Rolabo, S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006) (explaining that “a given course of action often has simultaneous advantages and disadvantages, and this does not necessarily obviate motivation to combine”); see also Winner 11 Petitioner in its Reply presents some evidence of charging times using a USB input charger. Pet. Reply 4–7; Ex. 1044 ¶¶ 6–12, Appendix A. Patent Owner disputes the accuracy of Petitioner’s calculations. Sur-reply 2–11. But, whether Petitioner’s calculations are accurate or not, Petitioner’s proposed alternative modification does not remove the faster charging path and instead adds the convenience and flexibility of a secondary charging method where the primary and faster charging path is unavailable. Ex. 1044 ¶ 12.” slip op. at 21
Patent outcomesUS 11,447,023 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,447,023
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.