- Arthrex, Inc. v. Medshape, Inc.Institution deniedPTAB · Apr 25, 2025 · IPR2025-00053 · APJ James A Tartal · IPR · Institution
The Board denied institution of IPR challenging claims 1–10, exercising § 314(a) discretion because the Fintiv factors, considered holistically, favored denial.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied discretionary otherInstitution denied
“review. 35 U.S.C. § 314(b) (2018); 37 C.F.R. § 42.4(a) (2023). An inter partes review may not be instituted “unless . . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). However, institution of inter partes review is discretionary. Upon consideration of the Petition, the Preliminary Response, the Preliminary Reply, the Preliminary Sur-reply, and the evidence of record, we exercise our discretion to deny institution of inter partes review under 35 U.S.C. § 314(a) in view of the co-pending district court litigation.” slip op. at 2
- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“7. Balancing the Fintiv Factors As discussed above, factors 1 and 3–5 each favor denial. Factor 2 is the only factor that favors institution because there is no trial date in the Parallel Proceeding and the evidence presented of a median time-to-trial for civil trials in that district suggests a potential trial date after the statutory deadline for a final written decision in this proceeding. However, Patent Owner also shows that discovery and any dispositive motions will be completed in the Parallel Proceeding well before the statutory deadline for a final written decision in this proceeding, which presents a risk of duplicated efforts given the unmitigated overlap in issues between proceedings. On balance, considerations concerning an uncertain trial date in the Parallel Proceeding under Factor 2 do not outweigh the more substantial reasons identified under the other Fintiv Factors. Thus, considering all of the factors holistically, we find on balance that the factors on this unique record weigh in favor of discretionary denial of the Petition. Accordingly, we exercise discretion to deny institution under 35 U.S.C. § 314(a).” slip op. at 15
Discretionary denialPatents in suitUS 7,985,222 - Casper Sleep Inc. v. Werner Media Partners, LLCAll claims unpatentablePTAB · Apr 24, 2025 · IPR2024-00474 · APJ Ryan H Flax · IPR · Final written decision
The Board held claims 1 and 2 unpatentable as obvious under each of four asserted § 103 grounds.
RulingsFinal written decision- Obviousness (§103) › Objective indicia / secondary considerationsObjective indicia outweighedDecided for petitioner
“concerning objective indicia of non-obviousness are unpersuasive. In any event, even if Patent Owner’s alleged objective indicia of non-obviousness were entitled to some weight, we find that the evidence of obviousness on this record is quite strong and substantially outweighs any indicia of non-obviousness on this record. Pfizer, Inc. v. Apotex, Inc., 480 F.3d 1348, 1372 (Fed. Cir. 2007) (“Although secondary considerations must be taken into account, they do not necessarily control the obviousness conclusion.”); see also Tokai Corp. v. Easton Enters., Inc., 632 F.3d 1358, 1371 (Fed. Cir. 2011) (“A strong case of prima facie obviousness, such as that presented here, cannot be overcome by a far weaker showing of objective indicia of nonobviousness.”).” slip op. at 52
- ExcludeMotion to exclude, deniedDenied
“as appellate review. We have considered the parties’ Motions, the related briefing and arguments and, for the reasons above, we deny each Motion.” slip op. at 82
Patent outcomesUS 10,842,301 unpatentable§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 10,842,301 - Precision Planting LLC v. Maschio Gaspardo S.P.A.No claims unpatentablePTAB · Mar 21, 2025 · IPR2024-00008 · APJ Benjamin D M Wood · IPR · Final written decision
Claims 1–5, 7–14, and 16 were not shown unpatentable because the asserted anticipation and obviousness grounds failed to establish the claimed thrust-bearing element and its required location.
RulingsFinal written decision- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for patent owner
“We determine that the evidence of record overcomes the presumption that § 112, para. 6 does not apply because “thrust-bearing element” does not recite sufficiently definite structure in this case. See, e.g., Pet. 22 (the term is not used here according to its common meaning). First, the word “element” is a “[g]eneric term[]” or “verbal construct[]” often “used in a claim in a manner that is tantamount to using the word ‘means’” because it does not “connote sufficiently definite structure.” Williamson, 792 F.3d at 1350. We find nothing in the ’121 patent or elsewhere in the record suggesting that “element” in the term “thrust-bearing element” should be considered other than a generic placeholder term. Second, although the term “thrust bearing” may connote certain structure, “thrust-bearing element” does not. A “thrust bearing” is “a well-known term of art in engineering and is ‘a bearing which sustains axial loads and prevents axial movement of a loaded shaft.’” Ex. 1003 ¶ 46 (citing Ex. 1017, 2147). “The balls of traditional thrust bearings are positioned inline with the axial force, as thrust bearings are designed specifically to transmit axial load.” Id. Here, however, “thrust-bearing” is hyphenated, and is therefore a phrasal adjective modifying “element” rather than the noun phrase “thrust bearing.”8 Further, there are “substantial differences”” slip op. at 15
- Claim Construction › Functional claiming / §112(f) means-plus-function › Corresponding structure / algorithm (indefinite if none)Term construed board ownDecided for patent owner
“We largely agree with Petitioner. “[S]tructure disclosed in the specification is ‘corresponding’ structure only if the specification or prosecution history clearly links or associates that structure to the function recited in the claim.” B. Braun Med. Inc. v. Abbott Labs., 124 F.3d 1419, 1424 (Fed.Cir.1997). The Specification of the ’121 patent “clearly links or associates” two components with the function of bearing axial thrust from the sowing disc: shaft 27 with flanging 30, and thrust-bearing plate 31. Ex. 1001, 3:25–35. Thrust-bearing plate 31 is expressly described as “bear[ing] on that surface of the disc which faces seal 24 . . . in order to withstand at least some of the axial load produced by the disc 16 on the seal 24. Ex. 1001, 3:28–31. Rotatably-mounted shaft 27 with flanging 30 is “fixed” to thrust-bearing plate 31 and therefore bears the axial load from the disc via the thrust-bearing plate. Id. at 3:25–28.10 10 Drive element 32 is described as part of thrust-bearing element 26 and permits thrust-bearing element 26 to be driven in rotation with sowing disc 16. Ex. 1001, 3:36–40. It is not described as bearing any axial load, however. Further, it is not necessary for the thrust-bearing element to rotate with the sowing disc for that element to bear axial load from the sowing disc. See id. at 3:58–59 (“Provision is also made for the thrust-bearing element 26 to be made idle and not driven in rotation by the [drive] shaft 20.”). Ultimately, however, whether drive element 32 is properly considered as part of the corresponding structure is not relevant to the outcome of this case. We disagree with Patent Owner that bearings 28 and seat 29 should be considered corresponding structure. The Specification does not associate these structures with any axial load-bearing function. Instead, bearings 28 and seat 29 are described as the means by which, and the location in which, shaft 27 is rotatably mounted. Ex. 1001, 3:25–27. Regardless, whether or not bearings 28 and seat 29 are considered corresponding structure does not affect the outcome of this case. In summary, we construe “thrust-bearing element” as a means-plus- function claim term under 35 U.S.C. § 112, para. 6. Its recited function is to bear thrust, or more specifically to “withstand at least some of the axial load produced by the disc on the seal.” The structure described in the Specification as corresponding to this function is shaft 27 with flanging 30, and thrust-bearing plate 31. We construe the limitation as directed to this structure, and equivalent structures.” slip op. at 21
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“The question is not whether the patentee disclaimed coverage over structures in which the thrust-bearing element is not located entirely in the movable portion of the housing. Instead, we must simply ascertain what the patentee meant by “supported rotatably in the movable portion.” To answer this question, we look to the Specification, which “is the single best guide to the meaning of a disputed term.” Phillips, 415 F.3d at 1315. “The construction that stays true to the claim language and most naturally aligns with the patent’s description of the invention will be, in the end, the correct construction.” Id. at 1316. Here, it is undisputed that in the sole embodiment described by the ’121 patent, the thrust-bearing element is supported by and entirely within the movable portion of the housing. Ex. 1001, Figs. 1, 2; Pet Post-Hearing Resp. 1; PO Post-Hearing Resp. 2. Construing “in the movable portion” to require the thrust-bearing element to be entirely within the movable portion both “stays true to the claim language and most naturally aligns” with the sole disclosed embodiment. Such a construction does not import the word “entirely” from the sole embodiment into the claims because the construction “arises from the claim language itself.” See SharkNinja Operating LLC v. iRobot Corp., 2024 WL 1132219, *2–*3 (Fed. Cir. 2024) (construing “primary brush assembly disposed within the round housing perimeter” to require that the primary brush assembly be “entirely within” the round housing perimeter is not an improper incorporation of “entirely” from embodiments into the claims because the construction “arises from the claim language itself”). Accordingly, having reviewed the complete record and the parties’ pre- and post-hearing briefing, we determine that “supported rotatably in the movable portion” means supported rotatably entirely in the space defined by the movable portion.” slip op. at 25
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“b. When “Thrust-Bearing Element” is Construed as a Means-Plus-Function Claim Limitation, there is Insufficient Evidence in the Record to Support a Finding that VenHuizen Discloses a Thrust- Bearing Element that is Supported Rotatably in the Movable Portion As noted above, Petitioner contends that VenHuizen’s shaft 55, retaining hub 56, and handle 58 together constitute the claimed thrust-bearing element “under a proper means-plus-function definition.” Pet. Reply 18–19.12 We do not discern sufficient evidence of record or persuasive technical reasoning from Petitioner to support a finding that these elements together are “supported rotatably in the movable portion” of the housing, as claim 1 requires. Ex. 1001, 4:38–39. We construed this limitation to require the thrust-bearing element to be supported rotatably entirely in the space defined by the movable portion (the space defined by VenHuizen’s second housing member 90). Petitioner does not contend, much less show, that these components are supported rotatably entirely in the movable second housing member 90. On the contrary, of the three components constituting VenHuizen’s thrust-bearing element, all of retaining hub 56 and most of shaft 55 are located in the fixed portion of the housing (first housing member 50), not the movable portion 90. See Ex. 1001, Fig. 6. Only handle 58 is ever located in the movable portion (when the fixed and movable portions are joined together). See id. Accordingly, Petitioner has not shown that VenHuizen discloses a thrust-bearing element rotatably supported in the movable portion.” slip op. at 35
Patent outcomesUS 8,770,121 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSRPatents in suitUS 8,770,121 - Mastercard Incorporated And Mastercard International Incorporated v. Ov Loop, Inc.All claims unpatentablePTAB · Mar 19, 2025 · IPR2023-01289 · APJ James A Tartal · IPR · Final written decision
Claims 1–33 are unpatentable as obvious over Collinge; the Board did not reach the anticipation grounds based on Collinge or the grounds based on Fiske.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner asserts that a person of ordinary skill in the art would have had “the equivalent of an undergraduate degree in electrical and computer engineering (or a related field) and approximately two years of work experience in the field of secure payment system,” and that “[a]dditional education in the field could be substituted for industry experience, and vice versa.” PO Resp. 4. Patent Owner does not suggest that its proposed level of ordinary skill materially differs from the level of skill proposed by Petitioner. See id. We find, on the current record, that the ’171 patent and the cited prior art references reflect the appropriate level of skill at the time of the claimed invention and that the level of appropriate skill reflected in these references and in the ’171 patent is consistent with the definition of a person of ordinary skill in the art proposed by Petitioner. Accordingly, we adopt Petitioner’s proposed level of ordinary skill. We would have reached the same conclusions in this Decision had we adopted Patent Owner’s proposed level of ordinary skill in the art.” slip op. at 14
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“In light of the lack of any dispute over the Second Construction, a construction we find consistent with the ordinary and customary meaning of the claim language, we need not resolve whether the claim language also encompasses Petitioner’s First Construction. Moreover, as explained below, we find Collinge renders obvious the subject matter of the limitation under either construction. See infra Section III.D.5. For the foregoing reasons, we find that an express construction of any claim term is not necessary for purposes of this Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 16
- Obviousness (§103) › Analogous artNot reached
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“We disagree with Patent Owner’s arguments because here Petitioner is not relying on some other disclosure to fill a missing limitation absent from Collinge, but is instead relying only on Collinge and the knowledge a person of ordinary skill in the art would possess when appreciating the teachings of Collinge. Petitioner is not suggesting Collinge needed to be modified to add the use of an APDU, but, rather, that Collinge’s disclosure already contemplated it based on the well-known background of the art. Petitioner shows by a preponderance of the evidence that “the Collinge Provisionals state the disclosures therein are intended to be used in a ‘standard’ PayPass transaction,” and that a person of ordinary skill in the art would have considered “the PayPass Specification (and EMV Specifications, with which the PayPass Specification complies) when reading Collinge.” Pet. Reply 8 (citing Ex. 1009, 8, 14–15, 22–23; Ex. 1050 ¶ 22). in a “standard” PayPass transaction and that a person of ordinary skill in the art would have known, at a minimum, that it would have been obvious from Collinge that the “first set of data” (i.e., the encrypted payload in Collinge) would have been “usable” by the application of Collinge “to formulate an application protocol data unit response,” as required by limitation [1.C]. Petitioner further demonstrates how Collinge discloses that the “first set of data” was “useable by the application to formulate” an APDU response in addressing limitation [1.E–3], which specifically requires “generating a response.” See Pet. Reply 11 (explaining that “[d]etails of how [the encrypted payload] is used to formulate an APDU response are explained where that is separately claimed”); see also id. (citing Pet. 48–50 (addressing limitation [1.E-3])).” slip op. at 36
Patent outcomesUS 10,032,171 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,032,171 - Encube Ethicals PTV. Ltd. v. Dermavant Sciences GmbHAdverse judgmentPTAB · Mar 7, 2025 · IPR2024-00834 · APJ Tawen Chang · IPR · Adverse judgment
The Board entered adverse judgment against Patent Owner on all challenged claims, 1–4, 6–10, 16, 18, 21, and 22, following their disclaimer.
RulingsAdverse judgment- Adverse judgmentAdverse judgmentGranted
“Terminate Proceeding and Parties’ Joint Motion for Entry of Adverse Judgment (collectively “Motion”). The parties jointly request that the Board enter adverse judgment in light of the disclaimer filed by Patent Owner disclaiming all challenged claims. Mot. 1 (citing 37 C.F.R. § 42.73(b)(2)). The Motion attaches as an exhibit a disclaimer under 37 C.F.R. § 1.321(a), filed January 28, 2025, of claims 1–4, 6–10, 16, 18, 21, and 22 of the ’088 patent, which constitute all of the claims challenged in the inter partes review. Ex. 2001; Paper 1, 3.” slip op. at 2
- PTAB / AIA Trials › Other PTAB motions (exclude, strike, seal, additional discovery, rehearing)Denied
“Accordingly, we grant the Parties’ Joint Motion for Entry of Adverse Judgment. This Adverse Judgment is sufficient to dispose of this proceeding and Patent Owner’s Motion to Terminate is denied as moot.1” slip op. at 3
NonePatents in suitUS 11,590,088 - Biofrontera Inc. / Biofrontera Bioscience GmbH et al. v. Sun Pharmaceutical Industries, Inc.InstitutedPTAB · Feb 24, 2025 · IPR2024-01312 · APJ Erica A Franklin · IPR · Institution
The Board instituted review of claims 1, 2, 4-6, 16, 17, and 19-21 on all asserted grounds, finding a reasonable likelihood of unpatentability over Lundahl and Larsen.
RulingsInstitution decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“justification for requiring a POSITA to have both an engineering degree and a medical degree. We agree, insofar as Petitioner has not clearly set out any particular explanation or evidence in support of its dual-degree requirement. In all other respects, we note that the parties’ proposed definitions are largely similar. Because we determine that Patent Owner’s proposed definition is reasonable and consistent with the ’028 patent and the cited art, we adopt Patent Owner’s definition for purposes of this Decision. In any event, our decision whether to institute does not turn on this level of skill determination.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“used to construe the claim in a civil action under 35 U.S.C. § 282(b); 37 C.F.R. § 100(b). Under that standard, claim terms “are generally given their ordinary and customary meaning” as understood by a person of ordinary skill in the art at the time of the invention. Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc) (quoting Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996)). See Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011) (“[C]laim terms need only be construed ‘to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Petitioner and Patent Owner assert that the Board need not construe any claims for the purpose of deciding whether to institute an inter partes review. Pet. 12; Prelim. Resp. 24. We agree.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“Based on our review of the Petition, Petitioner explains that a driving motivation for a POSITA to modify Lundahl to include Larsen’s five panels is “to increase the flexibility of the device to ensure the light panels could be maintained at a distance of 2-4′′ from surface of the treatment area, whether the face, arm, or back, etc.” Pet. 29 (emphasis added). As Lundahl’s device is not flexible, and such flexibility would improve its ability to treat areas other than an average sized face, we determine, at this stage in the proceeding, that this motivation for the combination is sufficient.” slip op. at 20
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightInstituted
“would have been motivated to modify Lundahl’s device by incorporating Larsen’s use of LEDs on the surface of the light applicators in place of Lundahl’s fluorescent tubes with a reasonable expectation of success. Prelim. Resp. 55. Patent Owner argues that Petitioner’s modification is based on improper hindsight bias because “Petitioner cherry-picks Larsen’s LEDs (together with the five panels) and purports to arrange them according to the [sic] ‘the uneven spacing’ of Lundahl’s fluorescent tubes.” Id. at 56 (citing Pet. 46–49; Ex. 1015 ¶¶ 175–80). According to Patent Owner, “Petitioner cannot on the one hand argue that a ‘POSITA would have understood that Larsen’s applicator is configured to uniformly illuminate a treatment surface of the patient,’ while on the other ignore Larsen’s teaching that the ‘light sources 17 are placed in regular row arrangements.’” Id. Patent Owner asserts that Petitioner’s proposed modification “mish-mashes aspects of Lundahl and Larsen ([while] avoiding the overall teachings of [challenged] claims.” Id. at 56–57. As discussed above, based on our consideration of the current record, Petitioner has provided sufficient motivation for employing Larsen’s flexible five panel configuration. These panels in Larsen already use LEDs as their light source. So, in our view, Petitioner’s incorporation of the five panels includes the lighting source, i.e., LEDs, for those panels taught by Larsen. Further, we note that Petitioner has persuasively asserted that a skilled artisan would have been motivated to use Larsen’s LEDs as they are more cost-efficient and last longer. See Pet. 31.” slip op. at 20
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 11,697,028 - PTAB · Feb 6, 2025 · IPR2024-01212 · APJ Robert A Pollock · IPR · Institution
The Board instituted IPR of claims 1–27 on all petitioned grounds after finding a reasonable likelihood that claim 1 would be obvious over Racz, Fitz, and Lee.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“§ 314. An inter partes review may not be instituted unless “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Further, a decision to institute may not do so on fewer than all claims challenged in the petition. SAS Inst., Inc. v. Iancu, 138 S. Ct. 1348, 1359–60 (2018); 37 C.F.R. § 42.108(a). After considering the evidence and arguments presented in the Petition, we determine that Petitioner demonstrates a reasonable likelihood of prevailing in showing that at least one of the challenged claims of the ’664 patent is unpatentable. Accordingly, we institute an inter partes review as to all the challenged claims of the ’664 patent on all the grounds of unpatentability set forth in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“According to Petitioner, the relevant technical field is “‘thermal ablation systems and methods,’ which includes ‘methods for performing Radio Frequency (RF) neurotomy.”’ Pet. 11 (citing Ex. 1003, 1:24–27). Relying on the testimony of Dr. Tucker, Petitioner contends that the ordinarily skilled artisan in this field would have had at least (i) a bachelor’s degree in biomedical engineering, or a related field, such as mechanical engineering, biomechanical engineering, or bioengineering, who also has at least 3 years of experience with thermal ablation system and methods; or (ii) an advanced degree in the same areas of academic study with at least 1 years of experience with thermal ablation systems and methods. Id. (citing Ex. 1034 ¶ 105) (paragraphing added). Absent evidence or argument to the contrary, we apply Petitioner’s proposed definition, as it appears consistent with the prior art and is supported by the presently unopposed testimony of Dr. Tucker. See Okajima v. Bourdeau, 261 F.3d 1350, 1355, (Fed. Cir. 2001) (the level of ordinary skill in the art may be reflected in the prior art itself). We note, however, that Petitioner’s open-ended language “at least” expands the ranges of education and experience indefinitely with no upper bound, thereby encompassing those of extraordinary skill. Therefore, we do not adopt this aspect of Petitioner’s formulation. B.” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“Claim Construction The Board interprets claim terms in an inter partes review using the same claim construction standard that is used to construe claims in a civil action in federal district court. See 37 C.F.R. § 42.100(b)). In construing claims, district courts give claims their ordinary and customary meaning, which is “the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention.” Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc). With respect to the challenged claims, Petitioner contends that no claim term requires express construction. Pet. 11 (citing Ex. 1034 ¶ 106 (Dr. Tucker’s testimony that “the terms in the Challenged Claims would be understood by a POSA to have their plain and ordinary meaning and do not require a special construction or definition”)). On the presents record, we agree with Petitioner that no term requires express construction. C.” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“through [1e]. Pet. 28–30. Petitioner further relies on “Racz as modified in view of Fitz and Lee,” with respect to elements [1e] through [1h]. See generally, id. at 30–47. Supported by the testimony of Dr. Tucker, Petitioner contends that one of ordinary skill in the art would have been motivated to combine the teachings of Racz, Fitz, and Lee with a reasonable expectation of success of arriving at the claimed invention. Id. at 1–6, 21–27; Ex. 1034 ¶¶ 132–149. In short, Petitioner contends that “[m]ost of the recited RF needle features—including an elongate cannula, a removable RF probe, a conductive tip, and a monopolar configuration—are conventional features disclosed in . . . Racz,” whereas Fitz discloses that a single-tip device, such as disclosed in Racz, “would produce limited ablation volumes and would have motivated a POSA to solve this problem by adding deployable filaments,” as recited in claim elements [1e] and [1f]. Id. at 4–5, 21–22. In addition to its reliance on the multiple electrode tips disclosed in Fitz, Petitioner contends that Lee would have “motivate[ed] a POSA to implement deployable filaments on the tip of Racz’s device using channels within the cannula,” and “also shows how the filaments can extend outwardly around the needle’s tip to advantageously expand and control the ablation volume.” Id. at 5–6. Accordingly, Petitioner contends, one of ordinary skill in the art “would have found it obvious to modify Racz’s device to include the well-known deployable filaments described in Fitz and Lee,” and would have implemented this combination as “a matter of routine engineering.” Id. at 6, 27.” slip op. at 20
Claim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 10,925,664 - PTAB · Feb 6, 2025 · IPR2024-01211 · APJ John G New · IPR · Institution
The Board instituted IPR on claims 18–47 and 53–74 and all petition grounds, finding a reasonable likelihood that claims 18–25, 27, and 29–33 are obvious over Racz, Fitz, and Lee.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“§ 314. An inter partes review may not be instituted unless “the information presented in the petition … and any response … shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Further, a decision to institute may not do so on fewer than all of the claims challenged in the petition. SAS Inst., Inc. v. Iancu, 138 S. Ct. 1348, 1359–60 (2018); 37 C.F.R. § 42.108(a); see also PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (interpreting the statute to require “a simple yesor-no institution choice respecting a petition, embracing all challenges included in the petition”).” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Absent evidence or argument to the contrary, we apply Petitioner’s proposed definition, as it appears to be consistent with the level of skill of the prior art and is supported by the presently unopposed testimony of Dr. Tucker. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the level of ordinary skill in the art may be reflected in the prior art itself). We note, however, that the open-ended language ‘at least’ expands the ranges of education and experience indefinitely with no upper bound, thereby also encompassing those of extraordinary skill as well. Therefore, we do not adopt this aspect of Petitioner’s formulation.” slip op. at 13
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“With respect to the challenged claims, Petitioner contends that no claim term requires express construction. Pet. 11 (citing Ex. 1033 ¶ 120 (Dr. Tucker’s testimony that “the terms in the Challenged Claims would be understood by a POSA to have their plain and ordinary meaning and do not require a special construction or definition”)). We agree with Petitioner that, on the record presently before us, no claim term requires express construction.” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“Petitioner argues that, in view of these teachings in Racz and Lee, a skilled artisan would have found implementing Lee’s perimeter filaments (22/1622) on Racz’s distal tip (14/38) to be a routine engineering task. Pet. 39 (citing Ex. 1033 ¶ 179). According to Petitioner, a person of ordinary skill in the arts would have recognized that it would be appropriate to implement Lee’s perimeter filaments (22/1622) without including Lee’s central filament. Id. Petitioner asserts that Lee discloses that any number and arrangement of filaments may be implemented to provide a desired ablation volume. Id. at 38 (citing Ex. 1010 ¶¶ 103, 105, 106). Additionally, Petitioner argues, because Racz’s tip (14/38) is already active, a skilled artisan would have recognized that Lee’s central filament would not be necessary. Id. (citing Ex. 1009, col. 3, ll. 60–63, col. 4, ll. 18–23; Ex. 1033 ¶ 179). Petitioner therefore argues that a person of ordinary skill in the art a person of ordinary skill in the art would have been motivated to implement Lee’s perimeter deployable filaments (22/1622) on the distal tip (14/38) of Racz’s cannula (10/33) for the purpose of expanding and controlling the energy coverage area of Racz’s device. Pet. 40. Specifically, Petitioner asserts that a skilled artisan would have been motivated to implement Lee’s perimeter filaments (22/1622) around Racz’s tip (14/38) to provide a desired ablation volume (e.g., in a full or partial “cone” shape) and omit Lee’s central filament. Pet. 38 (citing Ex. 1033 ¶¶ 179, 73–75, 79–83). Petitioner contends that, as both Lee and Fitz confirm, this would improve Racz’s device by providing an expanded and controlled energy coverage area. Id. (citing Ex. 1011 ¶¶ 9–10, Abstr.; Ex. 1010 ¶¶ 12, 84, 123–131; Ex. 1033 ¶ 179). Petitioner argues further that, in implementing Lee’s perimeter filaments (22/1622) on Racz’s distal tip (14/38), a person of ordinary skill in the art would have found it obvious to modify Racz’s tip (14/38) to include internal deflection surfaces (12/1612) (e.g., channels and ramps as disclosed in Lee) to guide the perimeter filaments (22/1622) outwardly around Racz’s tip (14/38). Pet. 41 (citing Ex. 1010 ¶¶ 16, 18, 92, 102, claims 8, 10; Ex. 1033 ¶ 180). Petitioner asserts that it would have been obvious to provide openings in Racz’s distal tip (14/38) (e.g., in communication the internal deflection surfaces as disclosed in Lee) such that Lee’s perimeter filaments (22/1622) can, when deployed, exit Racz’s distal tip (14/38). Id. (citing Ex. 1010 ¶ 92, 102; Ex. 1033 ¶ 180). Furthermore, argues Petitioner, and to preserve the functionality of Racz’s removable electrical probe (22/52) and active tip (14/38) (and consistent with Lee’s teachings) a skilled artisan would have arranged the perimeter filaments, channels, and ramps around the internal perimeter of Racz’s cannula (10/33). Pet. 41 (citing Ex. 1010 ¶¶ 91, 92, 98, 102; Ex. 1033 ¶ 181). Petitioner recapitulates that Racz’s probe (22/52) is configured to extend the full length of the cannula’s shaft (12/34) to supply RF energy to the tip (14/38) and measure tissue temperature. Pet. 42. According to Petitioner, by omitting Lee’s central filament and arranging the perimeter filaments, channels, and ramps around the inner perimeter of Racz’s cannula (10/33), a skilled artisan could have implemented Lee’s perimeter filaments (22/1622) without obstructing Racz’s cannula (10/33). Id. at 40. Petitioner contends that this modification would preserve the functionality of Racz’s electrical probe (22/52), which is needed to transmit RF energy. Id. (citing Ex. 1033 ¶ 181–182).” slip op. at 29
Claim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 10,736,688 - PTAB · Feb 6, 2025 · IPR2024-01210 · APJ John G New · IPR · Institution
The Board instituted IPR on claims 1–17 and 48–52 on all asserted grounds, finding a reasonable likelihood that at least one claim was obvious over Racz, Fitz, and Lee.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“§ 314. An inter partes review may not be instituted unless “the information presented in the petition … and any response … shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Further, a decision to institute may not do so on fewer than all of the claims challenged in the petition. SAS Inst., Inc. v. Iancu, 138 S. Ct. 1348, 1359–60 (2018); 37 C.F.R. § 42.108(a); see also PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (interpreting the statute to require “a simple yesor-no institution choice respecting a petition, embracing all challenges included in the petition”).” slip op. at 2
- Skill levelSkill level petitioner adoptedOther
“Absent evidence or argument to the contrary, we apply Petitioner’s proposed definition, as it appears to be consistent with the level of skill of the prior art and is supported by the presently unopposed testimony of Dr. Tucker. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the level of ordinary skill in the art may be reflected in the prior art itself). We note, however, that the open-ended language ‘at least’ expands the ranges of education and experience indefinitely with no upper bound, thereby also encompassing those of extraordinary skill as well. Therefore, we do not adopt this aspect of Petitioner’s formulation.” slip op. at 13
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“With respect to the challenged claims, Petitioner contends that no claim term requires express construction. Pet. 11 (citing Ex. 1032 ¶ 120 (Dr. Tucker’s testimony that “the terms in the Challenged Claims would be understood by a POSA to have their plain and ordinary meaning and do not require a special construction or definition”)). We agree with Petitioner that, on the record presently before us, no claim term requires express construction.” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“person of ordinary skill in the art would have been motivated to implement Lee’s perimeter deployable filaments (22/1622) on the distal tip (14/38) of Racz’s cannula (10/33) for the purpose of expanding and controlling the energy coverage area of Racz’s device. Pet. 35. Specifically, Petitioner asserts that a skilled artisan would have been motivated to implement Lee’s perimeter filaments (22/1622) around Racz’s tip (14/38) to provide a desired ablation volume (e.g., in a full or partial “cone” shape) and omit Lee’s central filament. Pet. 38 (citing Ex. 1032 ¶¶ 179, 73–75, 79–83). Petitioner contends that, as both Lee and Fitz confirm, this would improve Racz’s device by providing an expanded and controlled energy coverage area. Id. (citing Ex. 1011 ¶¶ 9–10, Abstr.; Ex. 1010 ¶¶ 12, 84, 123–131; Ex. 1032 ¶ 179). Petitioner argues further that, in implementing Lee’s perimeter filaments (22/1622) on Racz’s distal tip (14/38), a person of ordinary skill in the art would have found it obvious to modify Racz’s tip (14/38) to include internal deflection surfaces (12/1612) (e.g., channels and ramps as disclosed in Lee) to guide the perimeter filaments (22/1622) outwardly around Racz’s tip (14/38). Pet. 39 (citing Ex. 1010 ¶¶ 16, 18, 92, 102, claims 8, 10; Ex. 1032 ¶ 180). Petitioner asserts that it would have been obvious to provide openings in Racz’s distal tip (14/38) (e.g., in communication the internal deflection surfaces as disclosed in Lee) such that Lee’s perimeter filaments (22/1622) can, when deployed, exit Racz’s distal tip (14/38). Id. (citing Ex. 1010 ¶ 92, 102; Ex. 1032 ¶ 180).” slip op. at 29
Claim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 10,736,688 - PTAB · Feb 6, 2025 · IPR2024-01209 · APJ Robert A Pollock · IPR · Institution
The Board instituted IPR on claims 1–27 and all petition grounds, finding a reasonable likelihood that at least one claim is obvious over Racz, Fitz, and Lee.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“314. An inter partes review may not be instituted unless “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Further, a decision to institute may not do so on fewer than all claims challenged in the petition. SAS Inst., Inc. v. Iancu, 138 S. Ct. 1348, 1359–60 (2018); 37 C.F.R. § 42.108(a).” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Absent evidence or argument to the contrary, we apply Petitioner’s proposed definition, as it appears consistent with the prior art and is supported by the presently unopposed testimony of Dr. Tucker. See Okajima v. Bourdeau, 261 F.3d 1350, 1355, (Fed. Cir. 2001) (the level of ordinary skill in the art may be reflected in the prior art itself). We note, however, that Petitioner’s open-ended language “at least” expands the ranges of education and experience indefinitely with no upper bound, thereby encompassing those of extraordinary skill. Therefore, we do not adopt this aspect of Petitioner’s formulation. B.” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“With respect to the challenged claims, Petitioner contends that no claim term requires express construction. Pet. 11 (citing Ex. 1031 ¶ 106 (Dr. Tucker’s testimony that “the terms in the Challenged Claims would be understood by a POSA to have their plain and ordinary meaning and do not require a special construction or definition”)). On the presents record, we agree with Petitioner that no term requires express construction.” slip op. at 12
Claim constructioncites Phillips · KSRPatents in suitUS 10,966,782
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.