- PTAB · Oct 6, 2025 · IPR2025-00698 · APJ Kevin W Cherry · IPR · Institution
Instituted review of claims 1–11, 18–20, 23–25, and 28 on all petitioned grounds, based on a reasonable likelihood of prevailing on the asserted obviousness challenges.
RulingsInstitution decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Relying on the declaration testimony of Dr. Doolittle, Petitioner contends that an ordinarily skilled artisan for the ’539 patent “would have had an undergraduate degree (i.e., B.S., B.S.E. or the equivalent) in electrical engineering, materials science, physics, or a similar discipline” and “would also have one to two years of experience in the field of LED packaging design.” Pet. 6. Petitioner additionally contends that “[m]ore education could substitute for experience, and vice versa.” Id. Petitioner further contends that “[t]his person would have been capable of understanding and applying the teachings of the ’539 patent and the prior-art references discussed herein,” and “[m]oreover, the prior art reflects the level of skill at the time of the claimed invention.” Id. (citing Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); Ex. 1102 ¶¶ 38–42). Patent Owner states that “solely for the purposes of this proceeding, Patent Owner and its technical expert employ the same level of skill in the art as Petitioners.” Prelim. Resp. 22. Based on this record, we adopt Petitioner’s articulation of the level of ordinary skill in the art, which is consistent with the ’539 patent and the asserted prior art, and we apply it in our obviousness analysisbelow. See Okajima, 261 F.3d at 1355 (the prior art, itself, can reflect appropriate level of ordinary skill in art).” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner contends that “no construction should be necessary to institute this petition.” Pet. 20. Patent Owner “requests that the Board adopt the ordinary and customary meaning of the claim terms as understood by one of ordinary skill in the art.” Prelim. Resp. 22. Having considered the record, we determine that, at this stage, no express claim construction is necessary for any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). We note, however, there may be some claim terms below whose constructions that the parties may wish to address during trial.” slip op. at 10
- Expert testimonyPetitioner expert creditedDecided for petitioner
“and “how” the references would have been combined. As the Petition explains, Krummacher discloses radiation scattering particles having a size range of 50 to 1000 nm. See Pet. 26 (citing Ex. 1107 ¶ 39). Petitioner further explains that a person of ordinary skill in the art would use Stokes teachings to further refine that size range to optimize the particle size to preferentially scatter blue light. See id. at 26–27. Petitioner further provides reasons, suggested in Stokes itself, why a person of ordinary skill would have made this modification to Krummacher. See id. at 27–28 (citing Ex. 1108, 7:17–26; Ex. 1102 ¶ 128). Petitioner provides sufficient evidence that such a particle size selection was within the level of skill in the art at the time of the invention. See Ex. 1102 ¶¶ 122–128, 140–144; Ex. 1108, 7:1– 17; Ex. 1124 ¶¶ 80–81. We note that we have reviewed the testimony of Patent Owner’s expert, Dr. Schubert, but this testimony does not, at this stage, diminish the weight we give to Petitioner’s expert. Thus, we find that Petitioner has shown sufficiently that the combination of Krummacher and Stokes accounts for this limitation and that a person of ordinary skill would have combined the references in the manner suggested with a reasonable expectation of success.” slip op. at 23
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“institute an inter partes review. The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted unless “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” The Supreme Court has held that the Board, in a decision to institute under 35 U.S.C. § 314(b), may not institute review on less than all claims challenged in the petition. SAS Inst. Inc. v. Iancu, 584 U.S. 357, 371 (2018). Moreover, in accordance with our rules, “[w]hen instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.” 37 C.F.R. § 42.108(a) (2020); see also PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (interpreting the statute to require “a simple yes-or-no institution choice respecting a petition, embracing all challenges included in the petition”). Applying those standards, and upon considering the Petition, the Preliminary Response, and the evidence of record, we determine the information presented demonstrates a reasonable likelihood that Petitioner would prevail in establishing the unpatentability of at least one of the challenged claims of the ’539 patent. Accordingly, we institute an inter partes review.” slip op. at 2
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,614,539 - PTAB · Sep 19, 2025 · PGR2025-00025 · APJ Kimberly Mcgraw · PGR · Institution
The Board instituted PGR on claims 1–19 and all asserted grounds, finding it more likely than not that claim 1 is anticipated by the Gatorade Label.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“if “the information presented in the petition . . . demonstrate[s] that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” Post-grant review is available for patents that issue from applications that at one point contained at least one claim with an effective filing date on or after March 16, 2013. See Leahy-Smith America Invents Act, Pub. L. No. 112-29, 125 Stat. 284 (2011) (“AIA”), §§ 3(n)(1), 6(f)(2)(A). After considering the briefing and the evidence of record, for the reasons set forth below, we determine that Petitioner has shown that the ’422 Patent is eligible for post-grant review and has shown it is more likely than not that at least one challenged claim of the ’422 Patent is unpatentable under § 324(a). Accordingly, we institute a post-grant review of the challenged claims of the ’422 Patent.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art “would possess at least (1) a Bachelor’s degree in chemistry or a related field, with (2) five years of experience in material identification and characterization using multiple analytical methods and field sampling, or equivalent research or professional experience.” Pet. 12 (citing Ex. 1014 ¶ 24). Patent Owner does not dispute Petitioner’s definition for one of ordinary skill in the art nor provide a proposed definition of its own. See generally Prelim. Resp. For the purposes of this Decision, we adopt Petitioner’s undisputed proposal regarding the level of one of ordinary skill in the art.” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Prosecution history disclaimer / disavowalDisclaimer foundDecided for patent owner
“336. The applicant explained that not all combinations of shrink films and light blocking materials are recyclable. Id. at 335. The applicant explained that films can be compatible with PET recycling in two ways, (1) the film can float in water and be separated from PET that sinks in water or (2) the PET films crystallize and “can be recovered with the PET stream.” Id. at 336 (citing “A Resource Document by the Association of Plastic Recyclers (APR)”) (found at Ex. 1002, 323–332) (emphasis omitted). The applicant explained that “removing the label before or during the recycling process is not evidence of the recyclability of the label” and that “[r]emoving the label during the recycling process is not equivalent to actually recycling the label.” Id. at 335. As such, a POSITA reading the prosecution history would understand that a label is not recyclable with a PET container, as recited by the independent claims, by removing the label from the PET recycle stream before or during the recycling process.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownOther
“To determine how a person skill in the art would determine if a shrink label is “recyclable” as recited in the independent claims, we look to how the Specification of the ’422 Patent describes or defines recyclable shrink labels. For example, the ’422 Patent states that PET shrink films are generally considered recyclable if no inks are retained on the film after a caustic wash cycle typically used in PET reclaiming processes. Ex. 1001, 6:61–65. The ’422 Patent further states that labels are fully recyclable if the polymers used are clear, preferably clear PET, and the labels include inks that can be washed off in a “typical PET recycling wash (caustic wash).” Id. at 11:44– 49; see also id. at 11:49–54 (describing embodiments in which the labels are free or substantially free of inks that cannot be washed off in a caustic wash or where the labels are free or substantially free of color plastics that cannot be recycled). The ’422 Patent further discusses “industry standards” for determining whether various embodiments of shrink labels are recyclable. See, e.g., id. at 11:29–53. For example, the Specification states that the “Association for Plastic Recyclers (APR) Critical Guidance Protocol for Clear PET Articles with Labels and Closures (PET-CG-02)” (Ex. 1005) can certify that a film is fully recyclable with a container or bottle. Id. at 11:34– 38. Additionally, the Specification states that labels “are recyclable according to the Evaluation of the Near Infrared (NIR) Sorting Potential of a Whole Plastic Article (SORT-B-01)” (Ex. 1010) and/or the “Evaluation of Sorting Potential for Plastic Articles Utilizing Metal, Metalized, or Metallic Printed Components (SORT-B-03)” (Ex. 1011). Ex. 1001, 11:39–44. The ’422 Patent further states that embodiments of the labels “are fully recyclable. For example, the labels may include inks that can be washed off in a typical PET recycling wash (caustic wash) and the polymers” are preferably clear PET. Id. at 11:44–48. The ’422 Patent thus provides various descriptions or standards to determine the recyclability of shrink labels. For the purposes of addressing the anticipation and obviousness grounds, we determine that any of these standards can be used to determine if a shrink label is “recyclable.” We note that our construction is preliminary and is based on the present record. We invite the parties to further the address the construction of “wherein the recyclable shrink label is recyclable with a PET container” during trial.” slip op. at 12
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · NautilusPatents in suitUS 11,961,422 - PTAB · Sep 15, 2025 · IPR2025-00632 · APJ Mitchell G Weatherly · IPR · Institution
The Board instituted IPR on all challenged claims and grounds, finding a reasonable likelihood that claims 1, 2, 7–9, 11, 12, and 20–24 are obvious over Yamaguchi-727.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Cerebrum Sensor Technologies, Inc. (“Patent Owner”) timely filed a Preliminary Response. Paper 9 (“Prelim. Resp.”).1 Institution of an inter partes review is authorized by statute when “the information presented in the petition filed under section 311 and any response filed under section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Based on our review of the record, we conclude that Petitioner is reasonably likely to prevail with respect to at least one of the challenged claims.” slip op. at 2
- BurdenInstituted
“We disagree. Positioning module 6 to face a “predetermined direction” is a form of preventing movement that falls within the scope of limitation 1b. Moreover, Yamaguchi-727 uses a method for preventing movement of its module 6 in its housing 20, silicone potting material, that is expressly recognized by the Specification of the ’421 patent when it states: “A common technique used to assist in fixturing the electrical sensor device 40 known within the automotive industry is to fill the internal cavity with a coating material such as a neutral silicone or the like for purposes of retaining placement position.” Ex. 1001, 13:56–60. Although the Specification also asserts that the sensor assemblies disclosed in the 421 patent “do not use or require the use of any such coating or filing agents or materials for any fixturing of the electrical sensor device 40,” id. at 13:61–64, limitation 1b merely requires that the “sensor device . . . is disposed within the internal cavity and attached therein to prevent movement of the device within the internal cavity,” id. at 30:25–27. Absent a persuasive argument to the contrary, we preliminarily conclude that Yamaguchi-727’s use of potting material to hold its module 6 in place within its housing 20 meets the requirements of limitation 1b. Both parties are encouraged to adduce intrinsic evidence relating to the meaning of limitation 1b at trial. For all the reasons set forth above, we find that Petitioner has established a reasonable likelihood of proving the Yamaguchi-727 renders claim 1 unpatentable as obvious. 2. Dependent Claims 2, 7–9, 11, 12, and 20–24 Petitioner identifies the portions of Yamaguchi-727 that teach the limitations introduced in dependent claims 2, 7–9, 11, 12, and 20–24, all of which ultimately depend from claim 1. Pet. 32–40. Patent Owner relies upon its argument that Petitioner’s showing for claim 1 is deficient as the reason why Petitioner’s challenge to dependent claims 2, 7–9, 11, 12, and 20–24 fails. We reject this argument for the reasons stated in Part II.C.1 above. Based on our review of Petitioner’s otherwise uncontested argument and evidence cited in support, we find that Petitioner also establishes a reasonable likelihood of proving that Yamaguchi-727 renders dependent claims 2, 7–9, 11, 12, and 20–24 unpatentable as obvious. D. Remaining Challenges” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“Petitioner complies with the requirement of identifying “[h]ow the claim language is to be construed” by setting forth proposed interpretations of various claim terms in the table above.7 Both cases cited by Patent Owner relate to an issue presented by a petitioner’s alleged inconsistent handling of whether a claim term is subject to interpretation as a means-plus-function element under 35 U.S.C. § 112(f). Orthopediatrics Corp. v. K2M, Inc., IPR2018-01546, Paper 10 at 11 (PTAB Feb. 14, 2019); 10x Genomics, Inc. v. President and Fellows of Harvard College, IPR2023- 7 Neither party has identified any claim language that might invoke interpretation as a means-plus-function limitation, and we discern no such claim language. Additionally, we do not imply that a petitioner must always propose express interpretations for specific claim language to comply with Rule 42.104(b)(3). Rather, we only note that Petitioner has, by any measure, complied by expressly proposing interpretations for identified claim language.” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“We disagree. Positioning module 6 to face a “predetermined direction” is a form of preventing movement that falls within the scope of limitation 1b. Moreover, Yamaguchi-727 uses a method for preventing movement of its module 6 in its housing 20, silicone potting material, that is expressly recognized by the Specification of the ’421 patent when it states: “A common technique used to assist in fixturing the electrical sensor device 40 known within the automotive industry is to fill the internal cavity with a coating material such as a neutral silicone or the like for purposes of retaining placement position.” Ex. 1001, 13:56–60. Although the Specification also asserts that the sensor assemblies disclosed in the 421 patent “do not use or require the use of any such coating or filing agents or materials for any fixturing of the electrical sensor device 40,” id. at 13:61–64, limitation 1b merely requires that the “sensor device . . . is disposed within the internal cavity and attached therein to prevent movement of the device within the internal cavity,” id. at 30:25–27. Absent a persuasive argument to the contrary, we preliminarily conclude that Yamaguchi-727’s use of potting material to hold its module 6 in place within its housing 20 meets the requirements of limitation 1b. Both parties are encouraged to adduce intrinsic evidence relating to the meaning of limitation 1b at trial. For all the reasons set forth above, we find that Petitioner has established a reasonable likelihood of proving the Yamaguchi-727 renders claim 1 unpatentable as obvious. 2. Dependent Claims 2, 7–9, 11, 12, and 20–24 Petitioner identifies the portions of Yamaguchi-727 that teach the limitations introduced in dependent claims 2, 7–9, 11, 12, and 20–24, all of which ultimately depend from claim 1. Pet. 32–40. Patent Owner relies upon its argument that Petitioner’s showing for claim 1 is deficient as the reason why Petitioner’s challenge to dependent claims 2, 7–9, 11, 12, and 20–24 fails. We reject this argument for the reasons stated in Part II.C.1 above. Based on our review of Petitioner’s otherwise uncontested argument and evidence cited in support, we find that Petitioner also establishes a reasonable likelihood of proving that Yamaguchi-727 renders dependent claims 2, 7–9, 11, 12, and 20–24 unpatentable as obvious. D. Remaining Challenges” slip op. at 11
Claim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,835,421 - PTAB · Sep 9, 2025 · IPR2025-00389 · APJ Kevin W Cherry · IPR · Institution
The Board instituted IPR of claims 1–22 on all asserted grounds after finding a reasonable likelihood that at least one challenged claim would be shown unpatentable as obvious.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“institute an inter partes review. The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted unless “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” The Supreme Court has held that the Board, in a decision to institute under 35 U.S.C. § 314(b), may not institute review on less than all claims challenged in the petition. SAS Inst. Inc. v. Iancu, 138 S. Ct. 1348, 1355–56 (2018). Moreover, in accordance with our rules, “[w]hen instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.” 37 C.F.R. § 42.108(a) (2025); see also PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (interpreting” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“contends that a person of ordinary skill in the art for the ’498 patent “would have had a Bachelor’s Degree in Physics or an Engineering field relevant to battery technology (e.g., Electrical or Mechanical Engineering) and at least two years of industry experience in lithium-ion battery manufacturing and/or design.” Pet. 3 (citing Ex. 1003 ¶¶ 27–30).” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner “does not believe any claim terms require specific construction.” Pet. 10–11. Patent Owner states “no claim construction is necessary to deny institution because Patent Owner’s arguments for denial do not rely on the outcome of an actual controversy about claim interpretation.” Prelim. Resp. 10. Having considered the record, we determine that no express claim construction is necessary for any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner
“Patent Owner may be correct that the invention Takemura discloses seeks to improve on the “conventional” design disclosed in Figures 8 and 9, and, as part of its description of its inventions, Takemura discloses a variety of benefits to its approach over the approach disclosed in Figures 8 and 9. However, that does not negate the teachings provided in Figures 8 and 9. “A reference must be considered for everything it teaches by way of technology and is not limited to the particular invention it is describing and attempting to protect.” EWP Corp. v. Reliance Universal Inc., 755 F.2d 898, 907 (Fed. Cir. 1985) (emphases in original). As Petitioner explains, Sato discloses the use of tape, but does not provide details regarding its precise size and placement. See Pet. 34–39. Petitioner relies on Takemura for teaching how such tape would be sized and placed. Id. Indeed, Takemura teaches that such a placement was used in “conventional” lithium-ion batteries at the time. “It’s not necessary to show that a combination is “the best option, only that it be a suitable option.” Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 800 (Fed. Cir. 2021) (quoting PAR Pharm., Inc. v. TWI Pharms., Inc., 773 F.3d 1186, 1197–98 (Fed. Cir. 2014)). Here, Petitioner only relies on Takemura for teaching how the tape disclosed in Sato would be sized and placed. Although Takemura might teach a different ultimate approach, that does not diminish Takemura’s teachings of a known size and placement that was conventionally used in the art. “[I]f a technique has been used to improve one device, and a person of ordinary skill in the art would recognize that it would improve similar devices in the same way, using the technique is obvious unless its actual application is beyond his or her skill.” KSR, 550 U.S. at 417. Thus, we are not persuaded, on the current record, that Takemura teaches away from the particular combination that has been proposed.” slip op. at 24
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,923,498 - Champion Laboratories, Inc. / First Brands Group, LLC v. Hengst SENo claims unpatentablePTAB · Sep 8, 2025 · IPR2024-00603 · APJ Sheldon M Mcgee · IPR · Final written decision
Claims 1, 3, 5, 8–11, 15–17, 19, 23–25, and 28–30 were not shown unpatentable over Yokoyama, Yokoyama and Cline, or Honermann and Cline.
RulingsFinal written decision- Skill levelSkill level board ownDecided for petitioner
“On this record, we determine that the level of ordinary skill is reflected in the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (specific findings on the ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163–64 (Fed. Cir. 1985))). Because the level of ordinary skill in the art is not in dispute, and because the parties’ definition is consistent with the disclosures in the ʼ203 patent, the prior art, and the declaration testimony of Mr. Nranian and Dr. Basirat, we view the prior art and arguments through this lens when determining whether the claims are unpatentable as obvious over the prior art.5 See Graham, 383 U.S. at 17 (identifying “the level of ordinary skill in the pertinent art” as an underlying factual inquiry to be resolved in deciding obviousness, which is a question of law).” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“Although the parties spend significant portions of their briefing discussing the term “eccentric” and how it applies to certain figures from the ʼ203 patent and the relied-upon prior art, we determine that it is not necessary to expressly construe the term “eccentric” beyond the parties’ agreed-upon definition. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Ltd., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). Rather, we adopt Patent Owner’s proffered definition because it is consistent with the intrinsic record and because it is not in dispute. Specifically, Patent Owner asserts that the plain meaning of the term “eccentric” is defined as “located elsewhere than at the geometric center; also: having the axis or support so located.” PO Resp. 18–19 (citing the Merriam-Webster online dictionary definition of the term “eccentric” for support). Petitioner agrees with this definition. Pet. 35 (asserting that certain prior art elements are eccentric “because they are not located at the center of the filter insert or housing”); Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”); see also Ex. 2017 ¶ 33 (Dr. Basirat testifying that “[a] POSITA would understand that ‘eccentric’ in the context of [the] ʼ203 patent, means that central axis is located elsewhere than at the geometric center [and] not placed centrally or not having its axis or other part placed centrally”). The parties’ definition of “eccentric” is also consistent with the usage of the term in the ʼ203 patent. Ex. 1001, 10:23–31; Fig. 17.” slip op. at 14
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“Rather, we adopt Patent Owner’s proffered definition because it is consistent with the intrinsic record and because it is not in dispute. Specifically, Patent Owner asserts that the plain meaning of the term “eccentric” is defined as “located elsewhere than at the geometric center; also: having the axis or support so located.” PO Resp. 18–19 (citing the Merriam-Webster online dictionary definition of the term “eccentric” for support). Petitioner agrees with this definition. Pet. 35 (asserting that certain prior art elements are eccentric “because they are not located at the center of the filter insert or housing”); Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”); see also Ex. 2017 ¶ 33 (Dr. Basirat testifying that “[a] POSITA would understand that ‘eccentric’ in the context of [the] ʼ203 patent, means that central axis is located elsewhere than at the geometric center [and] not placed centrally or not having its axis or other part placed centrally”). The parties’ definition of “eccentric” is also consistent with the usage of the term in the ʼ203 patent. Ex. 1001, 10:23–31; Fig. 17.” slip op. at 14
- Expert testimonyPetitioner expert discountedDecided for patent owner
“(opining that “Patent Owner’s construction of ‘having an axis no located in a geometric center’ is too narrow”). Mr. Nranian’s Declaration testimony in this respect is not persuasive for several reasons. First, it is internally inconsistent. Compare Ex. 1016 ¶ 3 (criticizing the “axis” language in Patent Owner’s definition), with id. ¶¶ 9, 11 (relying on that very language to support an argument). Also, Mr. Nranian’s proposed definition of “eccentric” to merely mean “not located at the center” begs the question of what, precisely, is “the center”? Mr. Nranian does not persuasively explain how far a person of ordinary skill in the art would understand she could travel from the exact center point of an object and still be in “the center” of that object. See Tr. 10:13–19 (Judge McGee asking whether the center is “a miniscule point in the middle of [the] disc”); see also id. at 10:25–12:26 (Judge Weatherly highlighting the significant ambiguity in referring to something as in “the center”). Also, Mr. Nranian’s opinion is inconsistent with how the ʼ203 patent compares something that is “central,” i.e., “at the center,” and something that is “eccentrically” located. Ex. 1001, 7:13–14 (describing pipe nozzle 15 as “central”); id. at 8:53–56 (describing a “through hole” as “located in the center of the front panel 22” depicted in Figures 7 and 8); id. at 10:23–31 (describing return 12 as “in the center” and outlet 13 as “eccentrically thereto” in Figure 17). Patent Owner’s colorized and annotated Figure 7 is reproduced below: Patent Owner’s colorized and annotated version of Figure 7 of the ʼ203 patent illustrates “central pipe nozzle 15” in yellow passing through the “through hole” located in “the center” of front panel 22. PO Resp. 20. Significantly, pipe nozzle 15 and the through hole in panel 22 are both described as “central” and in “the center” but must have different diameters; otherwise, “central pipe nozzle 15” would not be capable of traveling through “through hole 22.” Ex. 1001, Fig. 7. Thus, the ʼ203 patent intrinsically bases whether an element is “central” or “in the center” on whether its axis is located at the geometric center. This is also illustrated in Figure 17 of the ʼ203 patent, reproduced below: Figure 17 of the ʼ203 patent illustrates filter housing 10 with return 12 “in the center . . . and, eccentrically thereto, the outlet 13 with the seat 14 for the blocking element 24.” Ex. 1001, 10:23–30. Finally, Mr. Nranian’s narrow interpretation of “eccentric”––which excludes the “having the axis or support so located” in the geometric center language––is at odds with the arguments it was proffered to support. Cf. Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”).” slip op. at 29
Patent outcomesUS 9,023,203 not shown unpatentableClaim construction§ 103 obviousnesscites GrahamPatents in suitUS 9,023,203 - PTAB · Aug 26, 2025 · IPR2025-00432 · APJ Kevin W Cherry · IPR · Institution
The Board instituted IPR of claims 1–19 on all asserted grounds after finding a reasonable likelihood that at least one challenged claim is unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“institute an inter partes review. The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted unless “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” The Supreme Court has held that the Board, in a decision to institute under 35 U.S.C. § 314(b), may not institute review on less than all claims challenged in the petition. SAS Inst. Inc. v. Iancu, 138 S. Ct. 1348, 1355–56 (2018). Moreover, in accordance with our rules, “[w]hen instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.” 37 C.F.R. § 42.108(a) (2020); see also PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (interpreting the statute to require “a simple yes-or-no institution choice respecting a petition, embracing all challenges included in the petition”). Applying those standards, and upon considering the Petition, the Preliminary Response, and the evidence of record, we determine the information presented a reasonable likelihood that Petitioner would prevail in establishing the unpatentability of at least one of the challenged claims of the ’148 patent. Accordingly, we institute an inter partes review.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Relying on the declaration testimony of Dr. Gido, Petitioner contends that an ordinarily skilled artisan for the ’148 patent “would have had at least a bachelor’s degree or equivalent degree from an accredited institution in chemistry, chemical engineering, materials science, or a similar discipline covering relevant principles of organic and inorganic chemistry, polymer processing, ceramic materials, and ceramic processing” and “three or more years of experience in electrochemical energy storage devices, lithium-ion battery technology, separators, characterizations and analyses of particle size, film thickness, and/or materials compositions, battery performance characterization, or other applications of polymer chemistry, ceramic chemistry, and ceramic processing.” Pet. 14. Petitioner additionally contends “[m]ore education could substitute for less experience, and vice versa.” Id. (citing Ex. 1003 ¶ 17). Patent Owner “adopts the definition proposed by the Petitioner.” Prelim. Resp. 14. Based on this record, we adopt Petitioner’s articulation of the level of ordinary skill in the art, which is consistent with the ’148 patent and the asserted prior art, and we apply it in our obviousness evaluations below. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art, itself, can reflect appropriate level of ordinary skill in art). We note that our decision would be the same applying either party’s definition of a person of ordinary skill in the art.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner contends that “[n]o claim terms require express construction.” Pet. 14–15. Patent Owner does not at this time address claim construction. See Prelim. Resp. 14–15. Having considered the record, we determine that no express claim construction is necessary for any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). We note, however, there may be some claim terms below whose constructions that the parties may wish to address during trial.” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“Petitioner has shown sufficiently that there would be a motivation to combine Murakami and Beard with a reasonable expectation of success. As Petitioner explains, Beard teaches particular benefits of its porous structure that a person of ordinary skill in the art would be motivated to combine with the teachings of Murakami. See Pet. 54–56. At this stage, Patent Owner’s counterarguments do not undermine this showing. To begin with, we note that Patent Owner appears to mischaracterize the combination as incorporating Beard’s cell structure into Murakami, when it is merely to incorporate Beard’s technique of closely packing inorganic particles in the cell walls into Murkami. Thus, at this stage and on the current record, Patent Owner’s arguments about alleged incompatibilities between Beard’s and Murakami’s particle size distributions, amounts of binder, and binding and dispersion processes are not persuasive. As for the contentions regarding Figure 2, we note that Petitioner does not rely on Figure 2, which appears to include the incorporation of fibers. Thus, it is unclear why the pore structure of Figure 2 would be relevant to the combination that Petitioner proposes. Finally, we find that Petitioner has shown sufficiently, on this record, that Petitioner has shown a reasonable expectation of success. As Petitioner and its expert explain, Beard and Murakami teach similar manufacturing techniques (which are also similar to the ’148 patent), and Beard and Murakami provide ample detail on how to implement their techniques. See Ex. 1003 ¶¶ 167–172; Ex. 1010 ¶¶ 57–60; Ex. 1005 ¶¶ 71–72. We find this level of detail adequate, at this stage, to show that a person of ordinary skill would have a reasonable expectation of success in making the combination. See Pfizer Inc. v. Apotex, Inc., 480 F.3d 1348, 1365 (Fed. Cir. 2007) (noting that “the expectation of success need only be reasonable, not absolute”).” slip op. at 37
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,575,148 - PTAB · Aug 25, 2025 · IPR2025-00631 · APJ Kevin W Cherry · IPR · Institution
The Board instituted IPR on claims 1–3, 5, 7–9, 11–13, and 15–22 on all five asserted § 103 grounds, finding a reasonable likelihood of success on at least one claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“institute an inter partes review. The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted unless “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” The Supreme Court has held that the Board, in a decision to institute under 35 U.S.C. § 314(b), may not institute review on less than all claims challenged in the petition. SAS Inst. Inc. v. Iancu, 138 S. Ct. 1348, 1355–56 (2018). Moreover, in accordance with our rules, “[w]hen instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.” 37 C.F.R. § 42.108(a) (2020); see also PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (interpreting the statute to require “a simple yes-or-no institution choice respecting a petition, embracing all challenges included in the petition”). Applying those standards, and upon considering the Petition, the Preliminary Response, and the evidence of record, we determine the information presented shows a reasonable likelihood that Petitioner would prevail in establishing the unpatentability of at least one of the challenged claims of the ’027 patent. Accordingly, we institute an inter partes review of all challenged claims (i.e., 1–3, 5, 7–9, 11–13, and 15–22) of the ’027 patent, based on the grounds asserted in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art would have “possessed an undergraduate degree in chemistry, polymers, materials science, chemical engineering (or related field) and one to two years of experience with constructing and manufacturing tires, tire patches, tire decals/stickers and/or the like.” Pet. 8 (citing Ex. 1003 ¶¶ 6–11). According to Petitioner, “Additional education could compensate for less practical experience. Conversely, additional practical experience could compensate for less education.” Id. Patent Owner does not provide an alternate definition, but, “Patent Owner does not acquiesce to, and reserves the right to address, [Petitioner’s] definition of a POSA.” Prelim. Resp. 6 n.6. Petitioner’s proposed definition appears to be consistent with the disclosure of the ’027 patent, and we adopt it for purposes of this Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that the prior art itself may “reflect[] an appropriate level” of ordinary skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“Having considered the record, we determine that no express claim construction is necessary for any claim terms. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 10
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Instituted
“We disagree with Patent Owner’s contentions that these disclosures indicate that Wilson’s patch would not meet the construction of “barrier material composition.” None of these disclosures even suggests that the base of Wilson’s patch is rigid as Patent Owner suggests. To begin with, the fact that the housing is “more rigid” provides no information about the absolute rigidness of the patch. See Ex. 1009, 9:16–21. As for the disclosure that the patch is contoured (id. at 3:35–67), Patent Owner provides only attorney argument to support its contention that the contour demonstrates that Wilson’s patch must be so rigid that it cannot be meet the claim limitation. In contrast, Petitioner demonstrates that Wilson discloses using the exact same materials described in the challenged patent (see Ex. 1001, 6:33–58 (noting “[e]lastomeric materials useful for forming the intermediate layer 24 include but are not limited to gum rubber, vulcanized natural rubber SBR . . . or comparable materials”); Ex. 1009, 3:49–55 (noting the patch may be constructed from natural rubber (NR), a preferred mixture of chlorobutyl rubber and natural rubber (CR/NR), or a preferred mixture of SBR and natural rubber (SBR/NR)), and provides detailed testimony from its expert to support its contentions (see Ex. 1003 ¶¶ 114–119). On the current record, we find Petitioner’s reasoning and evidence to be persuasive, and find that Petitioner has shown sufficiently that Willson discloses or teaches this limitation.” slip op. at 20
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,124,027 - Zhuhai Cosmx Battery Co., Ltd. v. Ninge Amperex Technology LimitedInstitution deniedPTAB · Aug 20, 2025 · IPR2025-00385 · APJ Debra L Dennett · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–10 were anticipated by Nishikawa or obvious over the asserted combinations.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“review under 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a). The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least [one] of the claims challenged in the petition.” For the reasons set forth below, upon considering the Petition and Preliminary Response, we determine that Petitioner has not established a reasonable likelihood of prevailing with respect to at least one challenged claim. Accordingly, we deny the Petition and decline to institute an inter partes review.” slip op. at 2
- Skill levelSkill level petitioner adoptedOther
“Petitioner contends that A person of ordinary skill in the relevant art would typically hold an advanced degree in chemistry, material science, and/or a related discipline, and have at least two years of experience with designing and/or fabricating battery separators or have an equivalent level of education, training, and experience. Pet. 5. Patent Owner “adopts the definition proposed by Petitioner” for the purposes of the Preliminary Response. Prelim. Resp. 22. In light of the record before us, and for purposes of this Decision, we adopt Petitioner’s unopposed definition because it is consistent with the specification. We note that neither party indicated that the result would change under any different definition.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Absolute plastic deformation rate” and “relative plastic deformation rate” are the only claim terms disputed in this proceeding, and are clearly defined in the Specification and in claim 1. See Spec. 4:22–27, 4:47–54; 25:31–37. Because we determine that claim construction is not necessary to decide whether to institute, we do not expressly construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review). slip op. at 11
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“Petitioner’s arguments are unconvincing. Petitioner points to nothing in Nishikawa that allows a POSITA to determine L2 (defined as “a length of 4 Tensile strength is measured as force per units area, such as MPa or psi. One MPa equals one N/mm2. Nishikawa Table 1 discloses tensile strength in N/cm. Ex. 1004 Table 1. Petitioner makes calculations to convert the reported N/cm into N/m2 and then to GPa, but provides no explanation for why tensile strength is reported in N/cm or how it was measured. See Pet. 31. the porous substrate after the porous substrate is stretched to breakage and docked along the fracture caused by the breakage and flattened”) or L2 – L0. See generally Pet., Ex. 1004. Petitioner and its expert, Dr. Pecht, fail to adequately explain why tensile strength divided by Young’s modulus is “a proxy for L1 – L2” or why such a proxy is sufficient to disclose the limitation as stated. Instead, we are required to rely on “approximations” and “estimates” with insufficient explanation of why such they are appropriate or adequate. See Pet. 26, 30, 32; see also Ex. 1003 ¶¶ 97, 105–108, 111.” slip op. at 13
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,964,927 - PTAB · Aug 19, 2025 · IPR2025-00431 · APJ Donna M Praiss · IPR · Institution
The Board instituted review of claims 1–7 and 14–17 on the petition’s grounds, finding the preliminary record showed a reasonable likelihood that at least one challenged claim was unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review under 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a). The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least [one] of the claims challenged in the petition.” For the reasons set forth below, upon considering the Petition and Preliminary Response, we determine that Petitioner has established a reasonable likelihood of prevailing with respect to at least one challenged claim. Accordingly, we grant the Petition and institute inter partes review.” slip op. at 2
Nonecites Phillips · KSR · GrahamPatents in suitUS 11,799,131 - PTAB · Aug 12, 2025 · IPR2025-00405 · APJ Debra L Dennett · IPR · Institution
The Board instituted IPR on claims 1–6 and 12–26 because Petitioner showed a reasonable likelihood of prevailing on at least one challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review under 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2025). The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least [one] of the claims challenged in the petition.” For the reasons set forth below, upon considering the Petition, Preliminary Response, and the evidence of record as presently developed, we determine that Petitioner has established a reasonable likelihood of prevailing with respect to at least one challenged claim. Accordingly, we grant the Petition and institute an inter partes review.” slip op. at 2
- BurdenNot reached
“3. Analysis On the preliminary record, we agree with Patent Owner that Petitioner fails to demonstrate that it meets the threshold showing under 35 U.S.C. § 314(a) for institution of trial with respect to Grounds 4C, 5C, and 6C.” slip op. at 91
Nonecites Phillips · KSR · GrahamPatents in suitUS 11,769,910
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.