- PTAB · Jun 3, 2025 · IPR2025-00056 · APJ Ryan H Flax · IPR · Institution
The Board instituted IPR on claims 1–30 and all three grounds, finding a reasonable likelihood that at least one claim would have been obvious over Perrett.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsInstitution denied 325dDenied
“In determining whether to deny institution under § 325(d), we use the following two-part framework: (1) whether the same or substantially the same art previously was presented to the Office or whether the same or substantially the same arguments previously were presented to the Office; and (2) if either condition of [the] first part of the framework is satisfied, whether the petitioner has demonstrated that the Office erred in a manner material to the patentability of challenged claims. Advanced Bionics, LLC v. MED-EL Elektromedizinische Geräte GmbH, IPR2019-01469, Paper 6 at 8 (PTAB Feb. 13, 2020) (precedential) (“Advanced Bionics”). The Becton, Dickinson factors provide useful insight into how to apply the framework under 35 U.S.C. § 325(d). Id. at 9 (referencing Becton, Dickinson & Co. v. B. Braun Melsungen AG, IPR2017-” slip op. at 8
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“An inter partes review may be instituted if the information presented by a petitioner in the petition, in view of the patent owner’s preliminary response and the preliminary record, shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least one of the claims challenged in the petition. 35 U.S.C. § 314.” slip op. at 19
- Skill levelSkill level petitioner adoptedDecided for petitioner
“A person of ordinary skill in the art (“POSA”) related to the ’061 patent would have a Ph.D., another advanced degree, or its equivalent, in areas related to pharmaceutics, chemistry, biology, medicine, or a related discipline, and 2-3 years of experience in formulation development. Alternatively, a POSA would have a lesser degree in those fields, with at least five or more years of experience in formulation development. The 8 See infra Section II.C. 9 At this stage of the proceeding, there is no evidence of objective indicia of obviousness or non-obviousness. POSA would also have had access to a medical doctor with a specialty in gastroenterology, and other individuals with expertise related to the above subjects. EX1070 ¶30. Pet. 5. At this stage of the proceeding, Patent Owner neither contests Petitioner’s proposed definition of the ordinarily skilled artisan nor provides an alternative definition. See generally Prelim. Resp. For the purposes of this Decision, we accept and use Petitioner’s proposed, and unopposed, definition of the ordinarily skilled artisan. It appears that Petitioner’s proposed definition comports with the high level of skill in the art reflected in the prior art of record and the ’061 patent, itself. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art itself [may] reflect[] an appropriate level” as evidence of the ordinary level of skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). D.” slip op. at 20
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownNo construction neededOther
“When the specification explains and defines a term used in the claims, without ambiguity or incompleteness, there is no need to search further for the meaning of the term.” Multiform Dessicants, Inc. v. Medzam, Ltd., 133 F.3d 1473, 1478 (Fed. Cir. 1998). The Specification expressly states that “[t]he terms ‘orally disintegrating tablet’, ‘orally dispersing tablet’, or ‘ODT’ refer to a solid dosage form of the present invention, which disintegrates rapidly in the oral cavity of a patient after administration, without chewing.” Ex. 1001, 5:12–15. At this stage of the proceeding, we interpret the language “orally disintegrating tablet” / “orally dispersing tablet” / “ODT” to have the meaning as expressly set forth in the Specification, as noted above. slip op. at 23
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · GrahamPatents in suitUS 11,260,061 - Provisur Technologies, Inc. v. Weber Food Technology GmbHAll claims unpatentablePTAB · May 28, 2025 · IPR2024-00235 · APJ Carl M Defranco · IPR · Final written decision
Claims 1–6, 8, 10, and 14–16 are unpatentable as anticipated by Young and obvious over Young and Norrie; the Johnson and Belk ground was not reached.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Provisur proposes that one of ordinary skill in the art would have had: (1) a bachelor’s degree (or equivalent) in mechanical engineering (or a similar field) and at least two years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field); or (2) at least seven years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field). Pet. 12. Weber does not contest Provisur’s framing of the level of ordinary skill in the art. See generally PO Resp. There being no dispute, we adopt Provisur’s definition of the level of skill in the art.” slip op. at 5
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Provisur construes the claim terms “according to their plain and ordinary meanings as understood by a [person of ordinary skill in the art] in view of the specification and prosecution history” and posits that “[n]o terms require an explicit construction to resolve the unpatentability controversy between the parties here.” Pet. 13. Weber appears to agree, stating in the related district court action that “most of [its] patent claims are plain and ordinary . . . [t]hey’re not difficult or complex claims or claim terms.” Ex. 3 US 5,514,032, issued May 7, 1996 (Ex. 1004, “Young”). 4 US 4,979,269, issued Dec. 25, 1990 (Ex. 1005, “Norrie”). 5 US 6,929,540 B2, issued Aug. 16, 2005 (Ex. 1006, “Johnson”). 6 US 6,198,834 B1, issued Mar. 6, 2001 (Ex. 1007, “Belk”). 1028, 5. This being the case, we do not find the need to expressly construe any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (confirming that the Board need not construe claim terms where their construction is not material to the dispute).” slip op. at 5
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“without first determining how much fat existed to begin with, i.e., prior to the side of meat being trimmed. But, as Provisur correctly notes, Weber ignores what one skilled in the art reasonably would have understood from reading Young’s disclosure as a whole. See Pet. 30–36 (citing Ex. 1003 ¶¶ 104–106, 109–112); Pet. Reply 2–12. When that is done, one skilled in the art would have understood that a necessary premise of Young’s determination of the thickness of fat to remain on the loin is knowing the thickness of the fat to begin with, which Young’s imaging system 190 and imaging processing routine 240 determine by first analyzing a series of “fat/lean separation lines” and “edge lines” in the side of meat being trimmed. Pet. 30–32 (citing Ex. 1004, 17:34–62, 18:33–56, 22:53–24:38, Figs. 2, 13); Pet. Reply 3–7 (citing portions of same evidence). More specifically, as described in Young (and articulated by Provisur), the side of meat is placed fat side down on a product support, i.e., platen 20. See Ex. 1004, 7:16–21, Figs. 1, 2. Using several cameras—top plan camera 196, end view camera 197, and fat line camera 198—Young’s imaging system 190 acquires multiple images of the side of meat from various angles and under various lighting conditions to “provide image data regarding each side of [meat].” See id. at 17:34–18:56. That image data is then used by Young’s image processing routine 240 to generate a series of demarcation lines on the side of meat, including: (1) fat/lean separation lines (representing the interface between the loin meat and the fat layer along top, side, and end views of the meat product; and (2) edge lines (representing lines along the outer surface of the meat product). See id. at 22:53–23:67, Figs. 10, 13 (Blocks 242, 246, 250, 254). In addition, “a plurality of points (preferably 20) are generated for each of the fat/lean separation and edge lines using known pattern matching routines.” Id. at 23:28–30, Fig. 13 (Blocks 244, 248, 252, 256); see also id. at 23:61–63 (essentially same). The fat/lean separation and edge lines (and points therein) generated by Young’s image processing routine 240 are then used to calculate certain dimensions and characteristics of the side of meat, such as height, length, and width. Id. at 24:10–22, Fig. 13 (Block 258). As Provisur’s expert credibly testifies, one skilled in the art would have understood that the dimension from the fat/lean separation line to the edge line along the outer surface represents the thickness of fat cover on the side of meat, i.e., before the fat is trimmed. See Ex. 1003 ¶ 106. Insofar as how that dimension is used, Young states that controller 172 uses “dynamic (real time) image data” of the fat/lean separation and edge lines “to dynamically modify the cutting profile of the loin knife assembly 100 so that the assembly follows a fixed distance from the separation line to provide the optimum fat cover for the loin.” Ex. 1004, 18:32–45; see also id. at 17:48–52 (describing “real time processor” for “image processing routines”). Notably, according to Young, the “fixed distance” represents the “desired” thickness of fat that remains on the loin, after trimming, and “sufficiently keeps the loin from drying out, but doesn’t make the loin look too fat,” although “[o]ther fat thicknesses may be desired in the alternative.” Id. at 20:60–66; see also id. at 10:39–42 (“Through control of the knife blade along several axes, assembly 100 preferably produces an optimum separation between loin and belly, with a desired fat covering left on the loin.” (emphases added)). Because the desired thickness of fat cover is what remains on the loin” slip op. at 9
- Strike new argumentNew argument consideredDecided for patent owner
“argument that Weber considers vital to its dispute of Provisur’s showing for the claimed fat thickness determination. During oral hearing, Weber repeatedly argued that Provisur changed theories midstream, i.e., between the time of the petition and the hearing. See Hrg. Tr. 22:18–24:47; see also id. at 31:14–22, 33:8–18, 34:16–20, 49:17–50:15, 54:16–56:25 (repeating same argument). More specifically, according to Weber, Provisur originally relied only on image data from Young’s “top view” camera as processed in “block 246” of Young’s image processing routine 240 when showing how Young meets the claimed fat thickness determination, whereas now Provisur relies on image data from Young’s “end view” cameras as processed in “Block 254.” Compare PO Sur-Reply 3–6 (focusing on Young’s “top view camera” in “block 246”), with Hrg. Tr. 27:4–16 (“[Block] 246, which is what they relied on, is processing images from the top-view camera in Young’s system. It is generating lines from the top-view camera in Young’s system. What they are newly trying to rely on today, for the first time, is Block 254 that is discussed toward the bottom of column 23 in Young, and that analyzes different images from a different camera. It is the end camera. It generates different lines. It demonstrates an end fat/lean line and an end edge line. Prior to today’s hearing, neither Petitioner, nor its expert, had ever discussed Block 254. You will not find a single reference to 254 in their papers, nor have they discussed the end edge line. It is completely new today. It finds absolutely no support in the record.” (emphases added)). We disagree with Weber’s contention. As shown and described in the petition, Provisur relies on more than simply Young’s “top view” camera and “block 246.” See Pet. 29–31. Rather, in its petition, Provisur annotates Young’s Figure 2 to show that image data from all three cameras of “imaging system 190”—“top plan camera 196, end view camera 197, [and] fat line camera 198”—play a role in the determination of fat thickness.8 Id. at 30. Moreover, Provisur cites the entire process depicted in “Figure 13” and described in columns “22:53–24:38” of Young as critical to the determination. Id. at 31. Those cited portions of Young involve not only the analysis of fat/lean and edge lines from “top view” images (block 246), but also the analysis of fat/lean and edge lines from “end view” images (blocks 250 and 254). See Ex. 1004, 23:12–24:13. In other words, Provisur’s showing for the claimed fat thickness determination is based on Young’s collective analysis of all those images. Indeed, Provisur’s expert confirms as much when confronted by Weber on cross-examination— Q. How does [Young] use the other cameras to identify that fat/lean separation line? A. Again, this is a -- this is a three-dimensional product that’s not regular, and all the views basically are needed to be able to describe that complex three-dimensional shape, so that the knife will be able to cut at that -- at that line, offset by whatever desired thickness there is, on that three-dimensional shape. Ex. 2006, 25:15–27:19 (emphasis added). 8 Indeed, contrary to Weber’s assertion, Provisur highlights “fat lean separation camera 198,” not top view camera 196, as most critical to the determination of fat thickness. Pet. 31. In the end, we reject the notion that Provisur changed theories” slip op. at 12
Patent outcomesUS 8,529,321 unpatentableClaim construction§ 102 anticipation§ 103 obviousnessPatents in suitUS 8,529,321 - Intel Corporation / Lenovo (United States) Inc. et al. v. Collision Communications, Inc.Institution deniedPTAB · May 28, 2025 · IPR2025-00301 · APJ Bart A Gerstenblith · IPR · Institution
The Board denied institution of review for claims 1–11, 16, and 21 under § 314(a), finding the Fintiv factors favored discretionary denial, and denied joinder.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Institution denied fintivInstitution denied
“2026. This date is nearly five months prior to the date on which the final written decision would be due if trial were instituted in this proceeding. And, even if we assume Petitioner’s alleged February–March 2026 trial date, this date too is several months prior to the projected final written decision deadline. As such, it is unlikely that a final written decision in this proceeding would issue before trial in the district court, unless the trial was delayed or rescheduled for a later time. Thus, we find this factor weighs in favor of exercising our discretion to deny institution. See ARM Ltd. v. Daedalus Prime LLC, IPR2025-00207, Paper 10 at 2 (May 16, 2025) (Before the Office of the Under Secretary of Commerce for Intellectual Property and Director of the United States Patent and Trademark Office) (exercising discretion to deny institution with the same relative timing between district court trial and final written decision deadline).” slip op. at 13
- PTAB / AIA Trials › Motions to amend / substitute claimsNot reached
- PTAB / AIA Trials › Joinder §315(c) / SAS all-or-nothingJoinder, deniedDenied
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied discretionary otherInstitution denied
“presented in the petition . . . and any [preliminary] response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Institution of inter partes review, however, is discretionary. See Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1367 (Fed. Cir. 2016) (“[T]he PTO is permitted, but never compelled, to institute an IPR proceeding.”). For the reasons discussed below, we exercise discretion pursuant to 35 U.S.C. § 314(a) not to institute inter partes review. Additionally, for the same reasons and because institution was denied in IPR2024-01248, we deny Petitioner’s Motion for Joinder. See 35 U.S.C. § 315(c) (“[T]he Director . . . may join as a party . . . any person who properly files a petition under section 311 that the Director . . . determines warrants the institution of an inter partes review under section 314.”).” slip op. at 3
Discretionary denialPatents in suitUS 9,814,071 - PTAB · May 23, 2025 · IPR2025-00196 · APJ Ryan H Flax · IPR · Institution
The Board instituted IPR on claims 1–16 under both § 103 grounds, finding a reasonable likelihood that at least one claim would have been obvious over Best-2008 and Osada.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“Under our current guidance, the filing of a Sotera-type stipulation is not conclusive, but remains “highly relevant” and will be considered “as part of [our] holistic analysis” here. See Guidance Memo. Whether Petitioner has other bases for invalidating the ’457 patent, such as the CarnoJet prior art product identified in the district court, is not a consideration here if such bases could not be asserted in this proceeding (and are not being used to argue over the asserted prior art here as a loop hole from the stipulation, of which there is no evidence).” slip op. at 15
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“satisfied that Petitioner has met its burden for institution. No argument by Patent Owner persuades us otherwise. Petitioner has shown that each limitation and element of claim 1 is taught or suggested by the combination of Best-2008 and Osada. Moreover, Petitioner’s asserted reason to combine the references is supported by the references’ disclosures: Best-2008 suggests filtration of its coolant is desirable, but provides no specific means for doing so; Osada teaches a way of filtering fluid from an open-top tank, similar to Best-2008’s.” slip op. at 42
- Skill levelSkill level petitioner adoptedDecided for petitioner
“A POSITA[12]in the field of the ’457 patent at the time of the earliest possible effective filing date (December 14, 2012) would have had Bachelor of Science degree in mechanical or chemical engineering and at least two years of experience relating to the design and/or implementation of fluid circulation systems involving application of fluid dynamics and heat transfer principles. Additional education may serve as a substitute for a lack of experience and vice versa. (Ex-1003- Dahm at ¶¶36-41, 63-70.) Pet. 18–19. Patent Owner applies this same definition. Prelim. Resp. 6–7. At this stage of the proceeding, we accept and use Petitioner’s proposed and unopposed definition of the ordinarily skilled artisan. It appears that Petitioner’s proposed definition comports with the level of skill in the art reflected in the prior art of record and the ‘457 patent, itself. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art” slip op. at 20
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Although either of the district court proceedings’ definitions of the term “weir” appears to accurately describe the feature, at this stage of the proceeding, we do not find it necessary to expressly interpret this claim language.” slip op. at 23
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · GrahamPatents in suitUS 10,405,457 - PTAB · May 16, 2025 · IPR2024-01487 · APJ Julia Heaney · IPR · Institution
The Board instituted IPR on all challenged claims and grounds, finding a reasonable likelihood that claim 1 would have been obvious over Nakazawa and Glaug.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Institution of an inter partes review is authorized by statute when “the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Upon consideration of the Petition in view of the record at this stage, we determine that Petitioner has established a reasonable likelihood that it would prevail in showing the unpatentability of at least one claim challenged in the Petition. We also determine that the arguments and evidence of record do not support discretionary denial of the Petition under 35 U.S.C. § 314(a). Accordingly, we grant institution of an inter partes review of all claims and all grounds asserted in the Petition.1” slip op. at 2
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“person of ordinary skill would modify either Nakazawa’s diffusion sheet or Glaug’s fluid acquisition system, but rather Petitioner argues “various layers in absorbent articles are invariably interchangeable.” Prelim. Resp. 41–42. Contrary to Patent Owner’s argument, as discussed above, Petitioner explains why and how a person of ordinary skill would modify Nakazawa’s diffusion sheet, and provides reasons for doing so. On this record, we find Petitioner’s reasoning sufficient.” slip op. at 24
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner
“Patent Owner further argues Nakazawa teaches away from Petitioner’s asserted modification in which Glaug’s lower non-perforated layer is added to Nakazawa’s diffusion sheet. Prelim. Resp. 42. Specifically, Patent Owner argues Nakazawa teaches that its embodiment in which the second absorbent material is wrapped in a hydrophilic sheet has the advantage of preventing leakage of super absorbent polymer (“SAP”) from the second absorbent material without impeding permeation of excretory fluid through the hydrophilic sheet. Id. at 43 (citing Ex. 1008 ¶ 85, Fig. 15). Patent Owner further relies on Petitioner’s argument that Nakazawa’s hydrophilic layer is analogous to the lower non-perforated layer in Glaug. Id. (citing Pet. 93–94). Therefore, Patent Owner argues, Nakazawa teaches that Glaug’s fluid acquisition system would impede permeation of fluid rather than promote it. Id. Patent Owner’s teaching away argument is unavailing based on the current record. Patent Owner improperly relies on Petitioner’s contention in its anticipation challenge based on Nakazawa, and characterizes it as an argument about Glaug. As further discussed in Section II.G below, Petitioner’s anticipation challenge is based on analogizing Nakazawa’s hydrophilic sheet to a core wrap feature identified in Patent Owner’s infringement contention in parallel district court litigation. See Pet. 92–93. Contrary to Patent Owner’s argument, Petitioner’s obviousness contention does not argue Nakazawa’s hydrophilic layer is analogous to Glaug’s nonperforated fibrous layer. Because Patent Owner is not properly characterizing Petitioner’s obviousness contention, Patent Owner’s teaching away argument is not persuasive.” slip op. at 24
- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“Under Fintiv, we consider the following factors: 1. whether the court granted a stay or evidence exists that one may be granted if a proceeding is instituted; 2. proximity of the court’s trial date to the Board’s projected statutory deadline for a final written decision; 3. investment in the parallel proceeding by the court and the parties; 4. overlap between issues raised in the petition and in the parallel proceeding; 5. whether the petitioner and the defendant in the parallel proceeding are the same party; and 6. other circumstances that impact the Board’s exercise of discretion, including the merits. Fintiv at 5–6.” slip op. at 35
Claim construction§ 103 obviousnessDiscretionary denialcites KSR · GrahamPatents in suitUS 9,308,138 - Arthrex, Inc. v. Medshape, Inc.Institution deniedPTAB · Apr 25, 2025 · IPR2025-00053 · APJ James A Tartal · IPR · Institution
The Board denied institution of IPR challenging claims 1–10, exercising § 314(a) discretion because the Fintiv factors, considered holistically, favored denial.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied discretionary otherInstitution denied
“review. 35 U.S.C. § 314(b) (2018); 37 C.F.R. § 42.4(a) (2023). An inter partes review may not be instituted “unless . . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). However, institution of inter partes review is discretionary. Upon consideration of the Petition, the Preliminary Response, the Preliminary Reply, the Preliminary Sur-reply, and the evidence of record, we exercise our discretion to deny institution of inter partes review under 35 U.S.C. § 314(a) in view of the co-pending district court litigation.” slip op. at 2
- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“7. Balancing the Fintiv Factors As discussed above, factors 1 and 3–5 each favor denial. Factor 2 is the only factor that favors institution because there is no trial date in the Parallel Proceeding and the evidence presented of a median time-to-trial for civil trials in that district suggests a potential trial date after the statutory deadline for a final written decision in this proceeding. However, Patent Owner also shows that discovery and any dispositive motions will be completed in the Parallel Proceeding well before the statutory deadline for a final written decision in this proceeding, which presents a risk of duplicated efforts given the unmitigated overlap in issues between proceedings. On balance, considerations concerning an uncertain trial date in the Parallel Proceeding under Factor 2 do not outweigh the more substantial reasons identified under the other Fintiv Factors. Thus, considering all of the factors holistically, we find on balance that the factors on this unique record weigh in favor of discretionary denial of the Petition. Accordingly, we exercise discretion to deny institution under 35 U.S.C. § 314(a).” slip op. at 15
Discretionary denialPatents in suitUS 7,985,222 - Casper Sleep Inc. v. Werner Media Partners, LLCAll claims unpatentablePTAB · Apr 24, 2025 · IPR2024-00474 · APJ Ryan H Flax · IPR · Final written decision
The Board held claims 1 and 2 unpatentable as obvious under each of four asserted § 103 grounds.
RulingsFinal written decision- Obviousness (§103) › Objective indicia / secondary considerationsObjective indicia outweighedDecided for petitioner
“concerning objective indicia of non-obviousness are unpersuasive. In any event, even if Patent Owner’s alleged objective indicia of non-obviousness were entitled to some weight, we find that the evidence of obviousness on this record is quite strong and substantially outweighs any indicia of non-obviousness on this record. Pfizer, Inc. v. Apotex, Inc., 480 F.3d 1348, 1372 (Fed. Cir. 2007) (“Although secondary considerations must be taken into account, they do not necessarily control the obviousness conclusion.”); see also Tokai Corp. v. Easton Enters., Inc., 632 F.3d 1358, 1371 (Fed. Cir. 2011) (“A strong case of prima facie obviousness, such as that presented here, cannot be overcome by a far weaker showing of objective indicia of nonobviousness.”).” slip op. at 52
- ExcludeMotion to exclude, deniedDenied
“as appellate review. We have considered the parties’ Motions, the related briefing and arguments and, for the reasons above, we deny each Motion.” slip op. at 82
Patent outcomesUS 10,842,301 unpatentable§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 10,842,301 - Precision Planting LLC v. Maschio Gaspardo S.P.A.No claims unpatentablePTAB · Mar 21, 2025 · IPR2024-00008 · APJ Benjamin D M Wood · IPR · Final written decision
Claims 1–5, 7–14, and 16 were not shown unpatentable because the asserted anticipation and obviousness grounds failed to establish the claimed thrust-bearing element and its required location.
RulingsFinal written decision- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for patent owner
“We determine that the evidence of record overcomes the presumption that § 112, para. 6 does not apply because “thrust-bearing element” does not recite sufficiently definite structure in this case. See, e.g., Pet. 22 (the term is not used here according to its common meaning). First, the word “element” is a “[g]eneric term[]” or “verbal construct[]” often “used in a claim in a manner that is tantamount to using the word ‘means’” because it does not “connote sufficiently definite structure.” Williamson, 792 F.3d at 1350. We find nothing in the ’121 patent or elsewhere in the record suggesting that “element” in the term “thrust-bearing element” should be considered other than a generic placeholder term. Second, although the term “thrust bearing” may connote certain structure, “thrust-bearing element” does not. A “thrust bearing” is “a well-known term of art in engineering and is ‘a bearing which sustains axial loads and prevents axial movement of a loaded shaft.’” Ex. 1003 ¶ 46 (citing Ex. 1017, 2147). “The balls of traditional thrust bearings are positioned inline with the axial force, as thrust bearings are designed specifically to transmit axial load.” Id. Here, however, “thrust-bearing” is hyphenated, and is therefore a phrasal adjective modifying “element” rather than the noun phrase “thrust bearing.”8 Further, there are “substantial differences”” slip op. at 15
- Claim Construction › Functional claiming / §112(f) means-plus-function › Corresponding structure / algorithm (indefinite if none)Term construed board ownDecided for patent owner
“We largely agree with Petitioner. “[S]tructure disclosed in the specification is ‘corresponding’ structure only if the specification or prosecution history clearly links or associates that structure to the function recited in the claim.” B. Braun Med. Inc. v. Abbott Labs., 124 F.3d 1419, 1424 (Fed.Cir.1997). The Specification of the ’121 patent “clearly links or associates” two components with the function of bearing axial thrust from the sowing disc: shaft 27 with flanging 30, and thrust-bearing plate 31. Ex. 1001, 3:25–35. Thrust-bearing plate 31 is expressly described as “bear[ing] on that surface of the disc which faces seal 24 . . . in order to withstand at least some of the axial load produced by the disc 16 on the seal 24. Ex. 1001, 3:28–31. Rotatably-mounted shaft 27 with flanging 30 is “fixed” to thrust-bearing plate 31 and therefore bears the axial load from the disc via the thrust-bearing plate. Id. at 3:25–28.10 10 Drive element 32 is described as part of thrust-bearing element 26 and permits thrust-bearing element 26 to be driven in rotation with sowing disc 16. Ex. 1001, 3:36–40. It is not described as bearing any axial load, however. Further, it is not necessary for the thrust-bearing element to rotate with the sowing disc for that element to bear axial load from the sowing disc. See id. at 3:58–59 (“Provision is also made for the thrust-bearing element 26 to be made idle and not driven in rotation by the [drive] shaft 20.”). Ultimately, however, whether drive element 32 is properly considered as part of the corresponding structure is not relevant to the outcome of this case. We disagree with Patent Owner that bearings 28 and seat 29 should be considered corresponding structure. The Specification does not associate these structures with any axial load-bearing function. Instead, bearings 28 and seat 29 are described as the means by which, and the location in which, shaft 27 is rotatably mounted. Ex. 1001, 3:25–27. Regardless, whether or not bearings 28 and seat 29 are considered corresponding structure does not affect the outcome of this case. In summary, we construe “thrust-bearing element” as a means-plus- function claim term under 35 U.S.C. § 112, para. 6. Its recited function is to bear thrust, or more specifically to “withstand at least some of the axial load produced by the disc on the seal.” The structure described in the Specification as corresponding to this function is shaft 27 with flanging 30, and thrust-bearing plate 31. We construe the limitation as directed to this structure, and equivalent structures.” slip op. at 21
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“The question is not whether the patentee disclaimed coverage over structures in which the thrust-bearing element is not located entirely in the movable portion of the housing. Instead, we must simply ascertain what the patentee meant by “supported rotatably in the movable portion.” To answer this question, we look to the Specification, which “is the single best guide to the meaning of a disputed term.” Phillips, 415 F.3d at 1315. “The construction that stays true to the claim language and most naturally aligns with the patent’s description of the invention will be, in the end, the correct construction.” Id. at 1316. Here, it is undisputed that in the sole embodiment described by the ’121 patent, the thrust-bearing element is supported by and entirely within the movable portion of the housing. Ex. 1001, Figs. 1, 2; Pet Post-Hearing Resp. 1; PO Post-Hearing Resp. 2. Construing “in the movable portion” to require the thrust-bearing element to be entirely within the movable portion both “stays true to the claim language and most naturally aligns” with the sole disclosed embodiment. Such a construction does not import the word “entirely” from the sole embodiment into the claims because the construction “arises from the claim language itself.” See SharkNinja Operating LLC v. iRobot Corp., 2024 WL 1132219, *2–*3 (Fed. Cir. 2024) (construing “primary brush assembly disposed within the round housing perimeter” to require that the primary brush assembly be “entirely within” the round housing perimeter is not an improper incorporation of “entirely” from embodiments into the claims because the construction “arises from the claim language itself”). Accordingly, having reviewed the complete record and the parties’ pre- and post-hearing briefing, we determine that “supported rotatably in the movable portion” means supported rotatably entirely in the space defined by the movable portion.” slip op. at 25
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“b. When “Thrust-Bearing Element” is Construed as a Means-Plus-Function Claim Limitation, there is Insufficient Evidence in the Record to Support a Finding that VenHuizen Discloses a Thrust- Bearing Element that is Supported Rotatably in the Movable Portion As noted above, Petitioner contends that VenHuizen’s shaft 55, retaining hub 56, and handle 58 together constitute the claimed thrust-bearing element “under a proper means-plus-function definition.” Pet. Reply 18–19.12 We do not discern sufficient evidence of record or persuasive technical reasoning from Petitioner to support a finding that these elements together are “supported rotatably in the movable portion” of the housing, as claim 1 requires. Ex. 1001, 4:38–39. We construed this limitation to require the thrust-bearing element to be supported rotatably entirely in the space defined by the movable portion (the space defined by VenHuizen’s second housing member 90). Petitioner does not contend, much less show, that these components are supported rotatably entirely in the movable second housing member 90. On the contrary, of the three components constituting VenHuizen’s thrust-bearing element, all of retaining hub 56 and most of shaft 55 are located in the fixed portion of the housing (first housing member 50), not the movable portion 90. See Ex. 1001, Fig. 6. Only handle 58 is ever located in the movable portion (when the fixed and movable portions are joined together). See id. Accordingly, Petitioner has not shown that VenHuizen discloses a thrust-bearing element rotatably supported in the movable portion.” slip op. at 35
Patent outcomesUS 8,770,121 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSRPatents in suitUS 8,770,121 - Samsung Electronics America, Inc. / Samsung Electronics Co., Ltd. v. Collision Communications, Inc.Institution deniedPTAB · Mar 21, 2025 · IPR2024-01250 · APJ Bart A Gerstenblith · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood of proving claims 1–5, 7, 9–16, or 20 unpatentable over the asserted grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“An inter partes review may be instituted only if “the information presented in the petition . . . and any [preliminary] response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). For the reasons given below, on this record Petitioner has not established a reasonable likelihood that it would prevail in showing the unpatentability of any of the Challenged Claims. Accordingly, we do not institute an inter partes review.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner, supported by Dr. Min’s testimony, proposes that a person of ordinary skill in the art at the time of the invention would have had “at least a bachelor’s [degree] in [electrical engineering, computer engineering, or computer science], physics, or equivalent, and two years of experience with cellular telecommunications, radio-access network architectures, protocols and signal propagation in wireless networks.” Pet. 3 (citing Ex. 1003 ¶ 59). Dr. Min testifies that “[a]dditional education could substitute for professional experience and vice versa.” Ex. 1003 ¶ 59. Additionally, Petitioner contends that Dr. Min “exceeded this level of experience by the priority date.” Pet. 3 (citing Ex. 1010 (curriculum vitae of Dr. Min)). In its Preliminary Response, Patent Owner does not take a position on the relevant level of ordinary skill in the art. See generally Prelim. Resp. At this stage of the proceeding and on the present record, we adopt Petitioner’s uncontested proposed level of ordinary skill in the art, which we find consistent with the level of ordinary skill in the art reflected by the ’946 patent and the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978).” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Neither party contends that any claim terms require an express construction to resolve the present controversy. Pet. 8 (“For purposes of this Petition only, Petitioner does not believe any terms require a formal construction.”); see generally Prelim. Resp. Nonetheless, Petitioner explains that the Petition is structured such that “Ground 1 is based on Patent Owner’s infringement contentions in the district court litigation, where the claimed ‘MUD module’ is generally mapped to multiple-input multiple-output (MIMO) receivers in a wireless network.” Pet. 2. Petitioner contends that “[u]nder this broad interpretation of a ‘MUD module,’ Walton’s MIMO receiver renders every challenged claim obvious.” Id. In contrast to Ground 1, the Petition states that “Ground 2 is based on the plain meaning of ‘MUD module,’ which is a component that detects, separates, and decodes signals from multiple users transmitting simultaneously over the same frequency band.” Id. Petitioner contends that, “[a]pplying the correct meaning of the term, Walton’s MIMO receiver does not necessarily comprise a MUD module.” Id. Therefore, Petitioner explains that “Ground 2 combines Walton with Learned, which expressly discloses [a] multi-user detector, and thus renders every challenged claim obvious in combination with Walton.” Id. at 2–3.7 In other words, the Petition presents Ground 1 and Grounds 2/3 as alternatives depending on the meaning of 7 Although not specifically relevant to claim construction, Petitioner explains that “Ground 3 further combines Walton and Learned with Quigley, to the extent Patent Owner argues Walton does not disclose providing a burst control input.” Pet. 3. “MUD module,” where Ground 1 is based on Petitioner’s understanding of Patent Owner’s interpretation of the term and Grounds 2 and 3 are based on Petitioner’s interpretation of the term as having its plain meaning. Petitioner further contends that “[e]very other claim term carries its ‘ordinary and customary meaning’ . . . .” Id. at 8. Although Petitioner presents a potential dispute regarding the meaning of “MUD module,” we need not construe this term expressly because the determination we reach herein does not depend on which meaning MUD module is applied. Accordingly, we do not construe any claim terms expressly because express constructions are not necessary to resolve the controversy before us. See Realtime Data, 912 F.3d at 1375.” slip op. at 12
- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Not reached
“IV. DISCRETIONARY DENIAL Patent Owners contends that the factors set forth in Apple Inc. v. Fintiv, Inc., IPR2020-00019, Paper 11 at 9 (PTAB Mar. 20, 2020) (precedential), weigh heavily in favor of discretionary denial. Prelim. Resp. 40–46; Paper 10. Petitioner disagrees. Pet. 74–77; Paper 9. In light of the conclusion reached above, we need not address the parties’ arguments regarding discretionary denial.” slip op. at 25
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 8,089,946 - Samsung Electronics America, Inc. / Samsung Electronics Co., Ltd. v. Collision Communications, Inc.Institution deniedPTAB · Mar 21, 2025 · IPR2024-01248 · APJ Bart A Gerstenblith · IPR · Institution
The Board denied institution because the Petition did not show a reasonable likelihood of proving claims 1–11, 16, and 21 unpatentable over the asserted obviousness grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“presented in the petition . . . and any [preliminary] response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). For the reasons given below, on this record Petitioner has not established a reasonable likelihood that it would prevail in showing the unpatentability of any of the Challenged Claims. Accordingly, we do not institute an inter partes review.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“At this stage of the proceeding and on the present record, we adopt Petitioner’s uncontested proposed level of ordinary skill in the art, which we find consistent with the level of ordinary skill in the art reflected by the ’071 patent and the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978).” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Neither party proposes a specific construction of any claim term, although Petitioner contends each term should be construed according to its plain and ordinary meaning. Pet. 16; see generally Prelim. Resp. Accordingly, we need not construe any claim terms expressly because the meaning of the terms is not in dispute and an express construction is not necessary to resolve the controversy before us.” slip op. at 13
- BurdenNot shown unpatentable
“We find the Petition lacking in particularity because it does not clearly identify what aspect of Jin is alleged to teach the unique signal parameters (or unique estimated signal parameters) recited in claim 1. See, e.g., 35 U.S.C. § 312(a)(3) (“A petition filed under section 311 may be considered only if — (3) the petition identifies, in writing and with particularity, . . . the evidence that supports the ground for the challenge to each claim . . . .”). First, as reflected above, the Petition asserts that something called a “unique pilot parameter” teaches the recited unique estimated signal parameters. But “unique pilot parameter” is not a term or phrase recited in Jin. See Prelim. Resp. 19 (arguing the same). So, when Petitioner states “Jin discloses that the base station uses the unique pilot parameter (i.e., ‘unique estimated signal parameters’) to ‘identify which user (i.e., mobile terminal) has transmitted the received data,’” it is not clear what element in Jin Petitioner intends to identify by the term “unique pilot parameter.” Dr. Min’s testimony does not help resolve the ambiguity in the Petition. In particular, Dr. Min also refers to a “unique pilot parameter (i.e., ‘unique signal parameter’) for each user.” Ex. 1003 ¶ 89. But, as noted above, Jin does not disclose an element referred to as a “pilot parameter” and it is not clear what element Dr. Min intended to identify in Jin.8” slip op. at 18
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 9,814,071
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.