- Tesla, Inc. v. Iqar Inc.Rehearing deniedPTAB · Nov 6, 2025 · IPR2024-00543 · APJ Sean P O’Hanlon · IPR · Rehearing
The Board denied Tesla’s rehearing request and left claims 8 and 18 not shown unpatentable under §103 over Hongo, Obradovich, Niki, and Newstrom.
RulingsRehearing decision- RehearingRehearing, deniedDenied
“II. STANDARD OF REVIEW A party requesting rehearing bears the burden of showing that the decision should be modified. 37 C.F.R. § 42.71(d). The party must identify specifically all matters we misapprehended or overlooked, and the place where each matter was previously addressed in a motion, an opposition, or a reply. Id.” slip op. at 2
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“Petitioner’s counsel during the hearing or any of Petitioner’s arguments and evidence. As confirmed by Petitioner’s counsel, Petitioner relies solely on Newstrom’s disclosure of loading its spatial database 20 into solid state memory via a “wireless connection to [a] server” in asserting that the database “may be hosted on a server that is remote from a vehicle.” Pet. 83 (citing Ex. 1012, 8:26–38; Ex. 1003 ¶ 197). Column 8, lines 27–29 is the only disclosure in Newstrom of a “wireless connection.” Although Petitioner argues that Newstrom’s system communicates wirelessly with the geospatial database while the vehicle is being driven (see Dec. 38 (citing Pet. 83); Tr. 19:20–22), Petitioner relies solely on the single instance of “wireless” in Newstrom’s disclosure to satisfy the recitation that the database (which Petitioner maps to Newstrom’s geospatial database 20) is “remote.” In the Decision, we explained that Petitioner’s reliance on Newstrom’s “wireless connection” and its assertion that the geospatial database may be hosted on a remote server were not persuasive to satisfy Petitioner’s burden to prove the unpatentability of claims 8 and 18 by a preponderance of the evidence, especially given Newstrom’s express disclosure that the geospatial database is located on the vehicle. Dec. 40–42. For example, we stated: Petitioner does not explain adequately why Newstrom’s disclosure that, when first initializing the database manager, the geospatial database is loaded into solid state memory by, for example, wirelessly transferring data from a server means that the geospatial database is remote from the vehicle. Similarly, Petitioner does not explain adequately why Newstrom’s disclosure that the database manager can load new portions of the data into solid state memory as the vehicle location changes means that the geospatial database is remote from the vehicle. Nor does Petitioner’s conclusory contention that “the geospatial database 20 may be hosted on a server that is remote from a vehicle” (Pet. 83 (emphasis added)) apprise us of disclosure that Newstrom’s geospatial database is remote from the vehicle. Dr. Morellas’ testimony is substantially identical to the Petition (see Ex. 1003 ¶197) and, thus, also fails to provide adequate support for Petitioner’s assertions. During the hearing, counsel for Petitioner confirmed that it relied solely on Newstrom’s disclose of the database using a “wireless connection” by which the database manager communicates with the database in arguing that Newstrom’s geospatial database 20 is remote from vehicle 12. Tr. 19:14–24; see also Ex. 1012, 8:27–29. Petitioner, however, fails to explain adequately how such wireless communication indicates that the database is not located on vehicle, especially given Newstrom’s express disclosure (discussed above) that the database is onboard the vehicle.” slip op. at 5
- Strike new argumentNew argument disregardedDecided for patent owner
“Initially, Petitioner’s reliance on assertions made in its Reply, relying on Dr. Morellas’ second declaration, fail to persuade us that we overlooked or misapprehended any arguments made in the Petition. Such post-institution arguments attempting to bolster the Petition are untimely and, thus, improper. See Patent Trial and Appeal Board Consolidated Trial Practice Guide 73 (Nov. 2019).6 Even considering Petitioner’s Reply arguments, however, we are not” slip op. at 7
§ 103 obviousnessPatents in suitUS 10,882,399 - Exotec Product France SAS / Exotec North America Inc. et al. v. Opex CorporationAll claims unpatentablePTAB · Oct 28, 2025 · IPR2024-00850 · APJ Arthur M Peslak · IPR · Final written decision
Claims 1, 3–12, 14, and 23–27 are unpatentable as obvious over Raizer and Hangzhou.
RulingsFinal written decision- Skill levelOther
“B. Level of Ordinary Skill in the Art We consider the asserted grounds of unpatentability in view of the” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“C. Claim Construction Neither Petitioner nor Patent Owner proposes an express construction” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable
“that it would improve similar devices in the same way, using the technique is obvious unless its actual application is beyond his or her skill.” KSR, 550 U.S. at 417. In this case, we must determine whether one of ordinary skill in the art would recognize that Hangzhou’s disclosure of driving its auto-guided trolleys 200 under shelves 100 would improve the operation of Raizer’s system in the same way. For us to resolve this question in Petitioner’s favor, Petitioner must provide “some articulated reasoning with some rational underpinning to support the legal conclusion of obviousness.” Id. at 418 (citing In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006)). However, bodily incorporation, i.e., “an actual physical substitution of” Hangzhou’s auto-guided trolleys or operating software into Raizer’s system, is not required. See In re Mouttet, 686 F.3d 1322, 1332 (Fed. Cir. 2012) (“It is well-established that a determination of obviousness based on teachings from multiple references does not require an actual, physical substitution of elements.”); In re Nievelt, 482 F.2d 965, 968 (CCPA 1973) (“Combining the teachings of references does not involve an ability to combine their specific structures.”).” slip op. at 23
Patent outcomesUS 11,472,632 unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,472,632 - PTAB · Oct 23, 2025 · IPR2025-00989 · APJ Timothy G Majors · IPR · Institution
The Board instituted IPR on all challenged claims based on the asserted grounds, finding a reasonable likelihood of success on the Schaffer-Hartley and Schaffer-Eller combinations.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Under 35 U.S.C. § 314(a), an inter partes review may not be instituted unless it is determined that there is a reasonable likelihood that the petitioner will prevail with respect to at least one of the claims challenged in the petition. For reasons explained below, we conclude that Petitioner shows a reasonable likelihood that it will prevail with respect to at least one of the ’291 patent’s challenged claims. We institute inter partes review on all challenged claims. See SAS Inst. Inc. v. Iancu, 584 U.S. 357, 362–63 (2018); 37 C.F.R. § 42.108(a) (“When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.”). Findings and conclusions at this stage are preliminary and based on the current record. Any final decision will be based on a full trial record.” slip op. at 2
- Skill levelSkill level patent owner adoptedDecided for patent owner
“We agree with Patent Owner that Petitioner’s proposed POSA definition lacks specificity. That definition, if interpreted generically, could mean that a person may qualify as a POSA if they had, for example, a B.S. in mechanical engineering and only two years of experience designing or engineering any type of product in any field. That is too broad. We find that a POSA would have had the agreed-upon educational credentials—an undergraduate degree in mechanical engineering or a related engineering discipline. Ex. 1003 ¶ 36; Ex. 2001 ¶ 73. We find that a POSA would also have had 2–4 years of design or engineering experience related to products in the field of the invention, which involves endovascular devices and the surgical procedures that use such devices. Ex. 1001, 1:24–60 (background of the invention). Such devices include, but are not necessarily limited to, hemostasis valves and catheters for minimally-invasive vascular surgeries. Id. And, consistent with the testimony of the parties’ experts, the POSA need not have had firsthand experience designing hemostasis valves. See, e.g., Ex. 1029 (Zalesky Tr.), 72:11–73:7 (testifying direct experience “designing” hemostasis valves or aspiration catheters is not necessary, but “general experience with vascular devices and procedures” is required); Ex. 2006 (Thornton Tr.), 180:13–19. Further, as Dr. Zalesky testified, the POSA’s experience related to developing such devices “could be as simple as bench testing and looking at clinical data.” Ex. 1029, 74:5–75:1. Lastly, a POSA would have had an” slip op. at 12
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“As noted above, the challenged claims require a “filament formed in a loop around the tubular sidewall” where, when a portion of the filament is pulled away from the loop, the loop’s diameter reduces, thereby reducing the diameter of the lumen formed by the tubular sidewall to seal the valve. See supra Section II.D. Every embodiment in the ’291 patent where the filament is described as forming a “loop” in the manner claimed involves a filament that is necessarily flexible. See, e.g., Ex. 1001, 13:17–29, Figs. 6–7. The valve would not work if the looped filament were somehow inflexible— pulling an end of the filament would not change the diameter of the loop, and the valve would not seal. Ex. 2001 ¶ 65 (testifying “a loop in a rigid component would necessarily be fixed in size” and the “inherent property of flexibility is essential to the loop structure of the claims”); Ex. 1023, 16–17” slip op. at 17
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“We are unpersuaded that Schaffer describes a valve with a filament as claimed. If, as construed above (supra Section III.C), the filament requires flexibility, Petitioner has not demonstrated that Schaffer describes such a feature in its valves. Instead, we agree with Patent Owner that a POSA would more likely understand Schaffer’s two U-shaped actuating members as being rigid features. Prelim. Resp. 33–36. We agree with Patent Owner that Petitioner implicitly admits that Schaffer’s actuating members are rigid leakage around tools inserted through the central lumen when in use and compared to the use of a flexible string or wire (of Hartley or Eller). Prelim. Resp. 34 (citing Pet. 51). We also find Dr. Zalesky’s interpretation of Schaffer more plausible than Mr. Thornton’s on the question of whether a POSA would have regarded Schaffer’s actuating members as being rigid structures. Ex. 2001 ¶¶ 78–85 (testifying, inter alia, that a POSA would have understood from Schaffer’s disclosure about making the actuator and actuating members from machining pre-existing amounts of metals and/or plastics, and further explaining that flexible parts would deform and be difficult to machine through conventional techniques); Ex. 1005 ¶¶ 81–82. Mr. Thornton opines that Schaffer’s disclosed manufacturing techniques for the actuator/actuating members are only examples and “a person of ordinary skill in the art could have simply purchased pre-made [flexible] flat wire or plastic tapes or ribbons.” Ex. 1003 ¶ 96. Such opinion invokes, at best, obviousness-based reasoning. This does not establish that Schaffer alone describes a filament sufficient to anticipate the claims. Furthermore, Mr. Thornton’s opinion that a POSA “would have understood that Schaffer’s U-shaped actuating members would have preferably been formed from a thin, flexible material” finds no support in Schaffer itself. Ex. 1003 ¶ 95. This opinion is also at odds with his testimony in related cases about an alleged formation of gaps with Schaffer’s actuating members, which suggested those members had a set “size” and lacked flexibility. See IPR2025-01157 (Ex. 1003 ¶ 81 (testifying a POSA “would have recognized that Hartley’s flexible string may better seal the valve than Schaffer’s metallic/plastic actuating members” because, “if a tool did not fit the size of” slip op. at 31
Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,865,291 - Alpinestars S.P.A. / Alpinestars USA Inc. v. Dainese S.P.A.Institution deniedPTAB · Oct 15, 2025 · IPR2025-00750 · APJ Benjamin D M Wood · IPR · Institution
The Board denied institution for claims 1–22 because Petitioner did not show a reasonable likelihood of prevailing on any of its three obviousness grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Because Petitioner has not shown a reasonable likelihood of establishing that one of ordinary skill in the art would have combined EP’536 (with or without Hatton) and CN’180 in the proposed manner, Petitioner has not shown a reasonable likelihood of prevailing with respect to claims 1 and 18. 5. Claims 2–17 and 19–22 Because Petitioner has not shown a reasonably likelihood of prevailing with respect to independent claims 1 and 18, Petitioner also has not shown a reasonable likelihood of prevailing with respect to the claims that depend therefrom (claims 2–17 and 19–22).” slip op. at 20
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner does not offer its own definition of the level of ordinary skill or dispute Petitioner’s definition. See generally Prelim. Resp. The level of ordinary skill in the art usually is evidenced by the references themselves. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978). As Petitioner’s unchallenged description of an ordinarily skilled artisan appears consistent with the subject matter discussed in the references and that of the challenged claims, for purposes of this Decision we apply Petitioner’s description of a person of ordinary skill in the art.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other
“For purposes of our analysis, we need only address the meaning of “planar structure,” and only to note that this limitation requires that all portions of the casing body, when inflated against the first mesh portion, second mesh portion, and tie elements, “form a planar structure” when the casing body is inflated. This is evident from both the claim language and the written description of the ’065 patent. Limitation [1e] of claim 1 recites that in the inflated condition, “said portions of the casing body” are “inflated against said first mesh portion, said second mesh portion, and said tie elements.” We understand “said portions of the casing body” to refer to all of the portions of the casing body. Likewise, “said first mesh portion, said second mesh portion, and said tie elements” refers to the entire mesh structure recited in limitation [1a]. Thus, this limitation requires all of the casing-body portions to inflate against the entire mesh structure to form the “planar structure.” This reading is consistent with the Specification. The Specification teaches that “[t]he first mesh portion and the second mesh portion together with the tie elements determine with the casing body the final shape of the inflatable element,” which “can reach a generally flat and planar final shape.” Ex. 1001, 4:19–23; see also id. at 4:59–5:3 (teaching that the casing body inflated within the mesh structure results in a “globally planar structure”). Here, “inflatable element” refers to the entire structure because it is comprised of the mesh structure and casing body. Id. at 3:11–18. Thus, the entire structure, when inflated, is “generally flat and planar.”” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“portions of the casing body, when inflated against the first mesh portion, second mesh portion, and tie elements, “form a planar structure” when the casing body is inflated. This is evident from both the claim language and the written description of the ’065 patent. Limitation [1e] of claim 1 recites that in the inflated condition, “said portions of the casing body” are “inflated against said first mesh portion, said second mesh portion, and said tie elements.” We understand “said portions of the casing body” to refer to all of the portions of the casing body. Likewise, “said first mesh portion, said second mesh portion, and said tie elements” refers to the entire mesh structure recited in limitation [1a]. Thus, this limitation requires all of the casing-body portions to inflate against the entire mesh structure to form the “planar structure.” This reading is consistent with the Specification. The Specification teaches that “[t]he first mesh portion and the second mesh portion together with the tie elements determine with the casing body the final shape of the inflatable element,” which “can reach a generally flat and planar final shape.” Ex. 1001, 4:19–23; see also id. at 4:59–5:3 (teaching that the casing body inflated within the mesh structure results in a “globally planar structure”). Here, “inflatable element” refers to the entire structure because it is comprised of the mesh structure and casing body. Id. at 3:11–18. Thus, the entire structure, when inflated, is “generally flat and planar.”” slip op. at 10
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 12,012,065 - PTAB · Oct 14, 2025 · IPR2025-00685 · APJ John G New · IPR · Institution
The Board instituted IPR on claims 1–23 and all petitioned grounds, finding a reasonable likelihood that the claims are obvious over Wei and Liu.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Summary Based upon the record as presently developed, we conclude that Petitioner has met its burden of showing a reasonable likelihood of showing at trial that at least claim 1 of the ’370 patent is obvious over the cited prior art. Because we determine that Petitioner has demonstrated a reasonable likelihood of success at trial in showing that at least one claim is unpatentable on at least one of the stated Grounds, we institute inter partes review of all challenged claims of the ’370 patent, based on all of the remaining grounds identified in the Petition. See 37 C.F.R. § 42.208(a); SAS Inst., Inc. v. Iancu, 584 U.S. 357, 371 (2018); PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (interpreting the statute to require “a simple yes-or-no institution choice respecting a petition, embracing all challenges included in the petition”).” slip op. at 44
- Skill levelSkill level board ownOther
“appears to be generally consistent with the level of skill presented in the cited prior art. See generally, e.g., Exs. 1005–1008; see also Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art itself may reflect an appropriate level of skill in the art). However, at this point we reject the portion of Petitioner’s proposed definition that includes having “access to other individuals with that knowledge and experience,” as not reflecting the individual level of skill of a given skilled artisan. See, e.g., Custom Accessories, Inc. v. Jeffrey-Allan Indus., Inc., 807 F.2d 955, 962 (Fed. Cir. 1986) (holding that “[t]he person of ordinary skill is a hypothetical person who is presumed to be aware of all the pertinent prior art. The actual inventor’s skill is not determinative”) (emphasis added, footnotes omitted). Consequently, and for the purposes of this Decision, we adopt Petitioner’s proposed definition as defining a person of ordinary skill in the art as a person who would have had “a Ph.D. in immunology, molecular biology, cellular biology, or a similar field, or an M.D. with similar experience, and would further have had at least five years of experience with antibodies and antibody engineering.”” slip op. at 6
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Plain and ordinary meaningOther
“Petitioner states that no term of the challenged claims requires construction to resolve the challenges in this Petition. Pet. 32. Patent Owner does not contest Petitioner’s assertion. See generally Prelim. Resp. We find, for the purposes of this Decision, that no terms of the challenged claims require construction beyond the ordinary and customary meaning of the terms, as understood by a person of ordinary skill in the art at the time of the invention. Phillips, 415 F.3d at 1312–13.” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“We find, based upon the present record and for the purposes of this Decision, that Petitioner has sufficiently established that a person of ordinary skill in the art would have been motivated to combine the teachings of Wei and Liu to determine the activity and suitability of Liu’s humanized anti- EGFR antibodies in an ADC. We acknowledge that Liu is silent regarding the pH selectivity or tissue preference of its binding affinity, but Patent Owner points to no prior art reference that would have informed a skilled artisan upon this point or that would have discouraged a person of ordinary skill in the art from combining the references. See fn.7, supra. And, even if a skilled artisan might have recognized that Liu’s humanized cetuximab might have been potentially problematic if it failed to show pH-selective activity like Wei’s Y104D, the mere fact that some disadvantage may come with an advantage when combining prior art does not foreclose their combination under § 103. Medichem, S.A. v. Rolabo S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006). In the instance of Liu’s humanized anti-EGFR antibody, a person of ordinary skill in the art would have recognized that its advantages (enhanced activity against tumor cells compared to chimeric cetuximab, thus requiring smaller dosages) could balance or outweigh its possible disadvantages (e.g., possible activity against non-tumor cells). Furthermore, it is in the nature of scientific research to continue to try new substitutions in drug therapy, even if a promising candidate has been discovered. As the Supreme Court stated in KSR: When there is a design need or market pressure to solve a problem and there are a finite number of identified, predictable solutions, a person of ordinary skill has good reason to pursue the known options within his or her technical grasp. If this leads to the anticipated success, it is likely the product not of innovation but of ordinary skill and common sense. In that instance the fact that a combination was obvious to try might show that it was obvious under § 103. 550 U.S. at 421.” slip op. at 39
Claim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 10,792,370 - Tanklogix, LLC v. Sitepro, Inc.Institution deniedPTAB · Oct 10, 2025 · IPR2025-00653 · APJ Bart A Gerstenblith · IPR · Institution
The Board denied institution on all claims because the Petition did not show a reasonable likelihood that any challenged claim was unpatentable over the asserted grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“An inter partes review may be instituted only if “the information presented in the petition . . . and any [preliminary] response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2024). For the reasons given below, on this record Petitioner has not established a reasonable likelihood that it would prevail in showing the unpatentability of any of the Challenged Claims. Accordingly, we do not institute an inter partes review.” slip op. at 2
- Skill levelSkill level patent owner adoptedDecided for patent owner
“The parties’ proposed levels of ordinary skill in the art are similar, although Patent Owner proposes two years of experience along with a bachelor’s degree whereas Petitioner proposes “significant” experience. Patent Owner also proposes an alternative with more extensive experience in lieu of a bachelor’s degree. Although we find Petitioner’s proposed qualifications acceptable, we adopt Patent Owner’s proposed qualifications for the purposes of this Decision because they offer a wider range of qualifications that nonetheless comport with the level of ordinary skill necessary to understand and implement the teachings of the ’504 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978). Our analysis and findings herein, however, do not turn on any differences in the parties’ proposed qualifications.” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Additionally, only terms that are in controversy need to be construed, and these need be construed only to the extent necessary to resolve the controversy. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). The parties assert that each claim term should be construed in accordance with its plain and ordinary meaning. Pet. 9; Prelim. Resp. 4 (citing Ex. 2009 ¶ 72); see Ex. 1002 ¶ 22 (opining the same). And, in the respective claim construction sections of their briefs, the parties do not propose any claim terms for express construction. We agree with the parties that no claim terms require express construction to resolve the controversy before us. See Realtime Data, 912 F.3d at 1375.” slip op. at 13
- Expert testimonyPetitioner expert discountedDecided for patent owner
“Ex. 1002 ¶ 47. As reflected above, Dr. Wooley’s testimony as to element [1.2] does not even assert that Cardamone discloses a tank, let alone one or more sensors disposed at a tank as recited in element [1.2]. Thus, Dr. Wooley’s testimony does not support Petitioner’s argument on this issue.” slip op. at 18
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,726,504 - Tanklogix, LLC v. Sitepro, Inc.Institution deniedPTAB · Oct 10, 2025 · IPR2025-00652 · APJ Bart A Gerstenblith · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–23 and 25–30 were unpatentable over the asserted grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsDenied
“presented in the petition . . . and any [preliminary] response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2024). For the reasons given below, on this record Petitioner has not established a reasonable likelihood that it would prevail in showing the unpatentability of any of the Challenged Claims. Accordingly, we do not institute an inter partes review.” slip op. at 2
- Skill levelSkill level patent owner adoptedDecided for patent owner
“The parties’ proposed levels of ordinary skill in the art are similar, although Patent Owner proposes two years of experience along with a bachelor’s degree whereas Petitioner proposes “significant” experience. Patent Owner also proposes an alternative with more extensive experience in lieu of a bachelor’s degree. Although we find Petitioner’s proposed qualifications acceptable, we adopt Patent Owner’s proposed qualifications for the purposes of this Decision because they offer a wider range of qualifications that nonetheless comport with the level of ordinary skill necessary to understand and implement the teachings of the ’403 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978). Our analysis and findings herein, however, do not turn on any differences in the parties’ proposed qualifications.” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“The parties assert that each claim term should be construed in accordance with its plain and ordinary meaning. Pet. 10; Prelim. Resp. 4 (citing Ex. 2009 ¶ 73); see Ex. 1002 ¶ 22 (opining the same). And, in the respective claim construction sections of their briefs, the parties do not propose any claim terms for express construction. We agree with the parties that no claim terms require express construction to resolve the controversy before us. See Realtime Data, 912 F.3d at 1375.” slip op. at 13
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“We agree with Patent Owner that the Petition fails to demonstrate that Kahn discloses element [1.2] because the evidence cited does not disclose a “first computer system being configured to provide remote control of the first pump or first valve” (i.e., a fluid-handling device). Kahn is directed to providing access to fluid sensing data and analyzing and providing visual information on that data, but Petitioner has not identified any disclosure of the capability to remotely control fluid-handling devices. See, e.g., Ex. 1005, code (54), 1:27–36, 2:50–3:2. More specifically, Kahn’s disclosures that Petitioner relies on for allegedly teaching remote control are deficient. We discuss each. First, Petitioner points to the following, “[f]or instance, as illustrated in FIG. 1C, a fluid control device such as a valve 15A is located on the input side of a sen[s]or unit 110.” Ex. 1005, 8:19–21, cited in Pet. 13. This portion of Kahn, however, does not disclose remote control. Second, Petitioner cites to the following: Finally, or in addition to, the communication unit 112B can include on-site alerts such as optical (indicator lights), audible alerts (e.g., alarm sounds), tactile (e.g., vibration of the unit) or can be interfaced to an appropriate control valve for simply shutting off the supply of fluid upon the detection of emergency events, for instance. Pet. 13 (citing Ex. 1005, 10:62–67). We agree with Patent Owner that this portion of Kahn teaches on-site alerts and local control of the fluid-handling device. See Prelim. Resp. 7. This portion of Kahn does not disclose remote control.” slip op. at 18
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,294,403 - Tanklogix, LLC v. Sitepro, Inc.Institution deniedPTAB · Oct 10, 2025 · IPR2025-00651 · APJ Bart A Gerstenblith · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–3, 6, 7, and 9–20 were unpatentable over any asserted ground.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsDenied
“presented in the petition . . . and any [preliminary] response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2024). For the reasons given below, on this record Petitioner has not established a reasonable likelihood that it would prevail in showing the unpatentability of any of the Challenged Claims. Accordingly, we do not institute an inter partes review.” slip op. at 2
- Skill levelSkill level patent owner adoptedDecided for patent owner
“The parties’ proposed levels of ordinary skill in the art are similar, although Patent Owner proposes two years of experience along with a bachelor’s degree whereas Petitioner proposes “significant” experience. Patent Owner also proposes an alternative with more extensive experience in lieu of a bachelor’s degree. Although we find Petitioner’s proposed qualifications acceptable, we adopt Patent Owner’s proposed qualifications for the purposes of this Decision because they offer a wider range of qualifications that nonetheless comport with the level of ordinary skill necessary to understand and implement the teachings of the ’680 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978). Our analysis and findings herein, however, do not turn on any differences in the parties’ proposed qualifications.” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“target value” is part of a command that is sent from a computing device to a server and then to a controller. The controller then receives a measurement of the fluid by a sensor and determines whether the measurement satisfies the “target value.” If the measurement does not satisfy the “target value,” further operations are undertaken. The recited operation sequence makes clear that the plain and ordinary meaning of “target value” is not as Dr. Wooley opines because the particular operating condition that a device is in at a particular time is represented by the measurement taken by the sensor, 11 Some claim language less relevant to construing “target value” was omitted for ease of reference. which the controller then uses to determine whether the measurement satisfies the “target value.” Additionally, claim 1 recites that the “target value” is sent as part of a command to the controller. The “target value” is not sent to the controller from the sensor, as might be expected if the plain and ordinary meaning of “target value” were as Dr. Wooley opines. Petitioner and Dr. Wooley’s construction would also result in “target value” meaning effectively the same thing as the measurement of the fluid by the sensor, a concept that is separately recited in claim 1 and to which the “target value” is compared. The Specification of the ’680 patent does not support Petitioner’s understanding of the plain and ordinary meaning of “target value.” Although the Specification does not recite “target value,” it recites “target state,” and describes “target state” sufficiently to understand the plain and ordinary meaning of “target” as used in “target value” and “target state.” In particular, the ’680 patent explains that “[i]n some embodiments, the process 104 includes receiving, via a network interface, from a remote user device, (e.g., via a command-center server) a command to change a state of a fluid-handling device to a target state.” Ex. 1001, 11:48–51. This portion reflects that the command is seeking to change a state of a fluid-handling device to a target state. In other words, the “target value” or “target state” is not generally “the particular operating condition that a device is in at a particular time”; rather, it is a value or state that the fluid-handling device is desired to be in, as Patent Owner and Dr. Durham explain. Additionally, just as claim 1 recites a directional component for the “target value” to be sent to the controller in a command, so too does the Specification describe a “target state” as being sent in a command from a remote user device. Thus, the Specification clearly supports the plain and ordinary meaning proposed by Patent Owner and Dr. Durham and not the plain and ordinary meaning proposed by Petitioner and Dr. Wooley. slip op. at 14
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“time-stamped process data, report exception therein to the remote host, and extract and transmit time-stamped process data to the remote host.” Ex. 1005, Abst. (emphases added). Almadi explains that its remote field systems must include a plurality of controller units “to issue commands to, and gather and process data from a plurality of field devices, including remote systems and instruments, . . . [and] a database server for the storage of process data retrieved from the remote subsystems and instruments.” Id. at 2:22–30 (emphases added). Based on these disclosures, we agree with Patent Owner that Petitioner has not established that Almadi discloses element [1.4]. Specifically, the teachings from Almadi identified by Petitioner refer to process data, which is data retrieved from the remote subsystems/field devices. Thus, we understand that Almadi’s teaching—of using an Ethernet switch to transmit “process data”—describes transmitting data from the remote subsystems/field devices. See Ex. 1005, 3:13–17, cited in Pet. 15. But claim 1 and particularly element [1.4], recites “sending, with the server, the target value to the network address [which identifies a controller of the fluid-handling device13] via the network,” which is different than sending process data from the field devices to the remote host or database server for storage.” slip op. at 19
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,175,680 - Tanklogix, LLC v. SiteproInstitution deniedPTAB · Oct 10, 2025 · IPR2025-00650 · APJ Sheila F Mcshane · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 18–32 and 34 were unpatentable over Kahn or Kahn and Gutierrez.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2024). Upon consideration of the Petition, the Preliminary Response, and the evidence of record, we determine that Petitioner has not established a reasonable likelihood of prevailing with respect to the unpatentability of at least one claim of the ’871 patent. Accordingly, for the reasons that follow, we decline to institute an inter partes review of claims 18–32 and 34 of the ’871 patent.” slip op. at 2
- Skill levelSkill level patent owner adoptedDecided for patent owner
“The respective proposed levels of qualifications for a person of ordinary skill in the art are similar, with Patent Owner proposing two years of experience compared to Petitioner proposing significant experience with remotely controlling fluid-handling devices, like SCADA systems. Patent Owner also proposes more extensive experience in lieu of educational experience. While we find Petitioner’s proposed qualifications to be acceptable, we adopt Patent Owner’s proposed qualifications for the purposes of this Decision because they offer a wider range of qualifications that nonetheless comport with the level of skill necessary to understand and implement the teachings of the ’871 patent and the asserted prior art. Our analysis and findings herein, however, do not turn on any differences in the qualifications adopted.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We determine that we need not expressly construe any claim terms to resolve the parties’ disputes on the current record. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 10
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“actuators and the remote control of fluid handling devices, including the receipt with the user-interface module of “a user command to actuate an actuator via a presented control interface” (limitation [18.7]) and “account authorized to send commands to remotely control fluid handling devices” (limitation [18.11]). We agree with Patent Owner that the Petition fails to demonstrate that Kahn discloses or teaches these limitations because the evidence does not provide support that there is remote control of fluid handling devices or the use of a user command on a control interface to send a command to a fluid handling device, for instance. Kahn is directed to providing access to fluid sensing data and analyzing and providing visual information on that data, but we do not discern that it teaches or discloses the capability to remotely control fluid handling devices. See, e.g., Ex. 1005, code (54), 1:27–36, 2:50–3:2. More specifically, the Kahn disclosures that Petitioner repeatedly relies upon for allegedly teaching this control are deficient. See Ex. 1005, 10:62–67, 14:35– 15:2, 15:62–16:32; see also Pet. 12–14, 16–18. Kahn discloses that “the communication unit 112B can include on-site alerts such as optical (indicator lights), audible alerts (e.g., alarm sounds), tactile (e.g., vibration of the unit) or can be interfaced to an appropriate control valve for simply shutting off the supply of fluid upon the detection of emergency events, for instance.” Ex. 1005, 10:62–67. Communication unit 112B is part of the local “sensor unit,” wherein the detection conditions determined by the sensor are communicated to remote devices by communication unit 112B. See id. at 3:31–33, 5:62–6:2, 6:27–35, 7:33–37, 13:7–12, Figs. 1A–1C. Kahn discloses that the sensor units, which include communication units 112B, can be located near shut-off valves and can communicate with distant locations. See id. at 11:1–13. There are no disclosures, however, in the above passages that there is remote control of fluid handling devices, that there is a user command on a control interface that actuates an actuator, or that there is a command sent to the facility actuators via a network connection, as required in limitations [18.5]–[18.7] and [18.9]–[18.12], respectively. Rather, the disclosure indicates that the communication unit 112B includes on-site alerts and that the local (non-remote) communication unit 112B can be interfaced with the control valve.” slip op. at 18
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,488,871 - PTAB · Oct 10, 2025 · IPR2025-00728 · APJ Timothy G Majors · IPR · Institution
The Board instituted IPR on all challenged claims and all five grounds, finding a reasonable likelihood of success based on at least one claim, including claim 1 over Hartley and Eller.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Under 35 U.S.C. § 314(a), an inter partes review may not be instituted unless it is determined that there is a reasonable likelihood that the petitioner will prevail with respect to at least one of the claims challenged in the petition. For reasons explained below, we conclude that Petitioner shows a reasonable likelihood that it will prevail with respect to at least one of the ’921 patent’s challenged claims.1 We institute inter partes review on all challenged claims. See SAS Inst. Inc. v. Iancu, 584 U.S. 357, 362–63 (2018); 37 C.F.R. § 42.108(a) (“When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.”). Findings and conclusions at this stage are preliminary and based on the current record. Any final decision will be based on a full trial record.” slip op. at 2
- Skill levelSkill level patent owner adoptedDecided for patent owner
“We agree with Patent Owner that Petitioner’s proposed POSA definition lacks specificity. That definition, if interpreted generically, could mean that a person may qualify as a POSA if they had, for example, a B.S. in mechanical engineering and only two years of experience designing or engineering any type of product in any field. That is too broad. We find that a POSA would have had the agreed-upon educational credentials—an undergraduate degree in mechanical engineering or a related engineering discipline. Ex. 1003 ¶ 35; Ex. 2024 ¶ 61. We find that a POSA would also have had 2–4 years of design or engineering experience related to products in the field of the invention, such devices. Ex. 1001, 1:16–54 (background of the invention). Such devices include, but are not necessarily limited to, hemostasis valves and catheters for minimally-invasive vascular surgeries. Id. And, consistent with the testimony of the parties’ experts, the POSA need not have had firsthand experience designing hemostasis valves. See, e.g., Ex. 1037 (Zalesky Tr.), 72:11–73:7 (testifying direct experience “designing” hemostasis valves or aspiration catheters is not necessary, but “general experience with vascular devices and procedures” is required); Ex. 2030 (Thornton Tr.), 180:13–19. Further, as Dr. Zalesky testified, the POSA’s experience related to developing such devices “could be as simple as bench testing and looking at clinical data.” Ex. 1037, 74:5–75:1. Lastly, a POSA would have had an understanding of such devices’ design requirements as determined by the needs of the physician, patient, and procedure, which understanding may be informed by work experience and/or study. Ex. 2030, 24:5–21.” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“That does not, however, address the dispute about “flexibility.” On that issue, the argument and evidence at this stage tends to favor Patent Owner’s position that a “filament” as claimed is flexible. which include claim 1’s recitation of an “active tensioning mechanism” comprising the filament and the Specification’s description of a filament that can be both “loosened” and “tightened.” Prelim. Resp. 14–16 (citing, e.g., Ex. 1001, 9:36–37, 9:53–56 (teaching “the filament 150 is tightened” when the actuator buttons are released and “the filament 150 is loosened” when the buttons are pressed to open the valve)); see also Ex. 2025, 1288 (defining “tension” as to “tighten to a desired or appropriate degree”). These descriptions from the patent appear at this stage more consistent with the view that the filament is characteristically flexible, not rigid. So too, as we explained in related matters, the ’921 patent’s loop embodiments (where the filament forms one or more loops like depicted and described in Figures 6–7) require a flexible structure. See, e.g., Ex. 2032, 15–16 (explaining that the device would not work to constrict the tubular sidewall and lumen (analogous to the elongate member defining a lumen of the claims here) if the filament forming the loop(s) was inflexible); Ex. 1001, Figs. 6–7 (filament 150, with sub-filaments 150-A and 150-B). Although flexibility of the filament in the patent’s “bight” embodiments (e.g., as shown in Figures 8 and 9) is not manifestly clear, there is a dearth of evidence from Petitioner—either intrinsic or extrinsic to the patent— showing why a POSA would have understood the bights as embracing rigid structures. See Ex. 1001, Figs. 8–9 (similar to the loop embodiments, depicting structures 150-A and 150-B forming sub-filaments of the bight(s)). Moreover, as admitted by Petitioner’s expert, that a filament may be made from various materials described in the patent (e.g., synthetics or metals) does not, absent more information, lead to a conclusion that a filament is “rigid.” Ex. 2030, 125:2–126:4 (testifying “the relative stiffness or rigidity” slip op. at 14
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“Based on the current record, we are unpersuaded that Schaffer describes a valve with a filament as claimed. If, as construed above (supra Section III.C), a filament requires flexibility, Petitioner has not demonstrated that Schaffer describes such a feature in its valves. Instead we agree with Patent Owner that Petitioner “implicitly admits” that Schaffer’s actuating members are rigid insofar as Petitioner argues those members would form gaps for fluid leakage around tools inserted through the central lumen when in use and compared to the use of a flexible string or wire (of Hartley or Eller). Prelim. Resp. 29 (citing Pet. 36). Moreover, we find Dr. Zalesky’s interpretation of Schaffer more plausible than Mr. Thornton’s on the question of whether a POSA would have regarded Schaffer’s actuating members as being substantially rigid structures. Ex. 2024 ¶¶ 92–100 (testifying, inter alia, that a POSA would have understood from Schaffer’s disclosure about making the actuator and actuating members from machining pre-existing amounts of metals and/or plastics, and further explaining that flexible parts would deform and be difficult to machine through conventional techniques); Ex. 1005 ¶¶ 81–82. Mr. Thornton testifies that Schaffer’s disclosed manufacturing techniques for the actuator/actuating members are only examples and “a [and flexible] flat wire or plastic tapes or ribbons.” Ex. 1003 ¶ 79. Such testimony invokes, at best, obviousness-based reasoning. This does not establish that Schaffer alone describes a filament sufficient to anticipate the claims. Trintec Indus., Inc. v. Top-U.S.A. Corp., 295 F.3d 1292, 1296 (Fed. Cir. 2002) (explaining that the “test for novelty” requires “strict identity”); Jamesbury Corp. v. Litton Indus. Prods., Inc., 756 F.2d 1556, 1560 (Fed. Cir. 1985) (holding “anticipation is not shown by a prior art disclosure which is only ‘substantially the same’ as the claimed invention”), overruled on other grounds, A.C. Aukerman Co. v. R.L. Chaides Constr. Co., 960 F.2d 1020 (Fed. Cir. 1992) (en banc). Because we determine on this preliminary record that Schaffer does not describe a valve comprising a “filament” as claimed, Schaffer cannot anticipate the challenged claims.” slip op. at 26
Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,844,921
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.