PTAB
Advanced fields
3,956 decisions · 769msnewest first
  • PTAB · Aug 4, 2026 · IPR2025-00249 · APJ Michael J Fitzpatrick · IPR · Final written decision

    Claims 1 and 4–8 are unpatentable: claims 1 and 4–6 as obvious over Huang2 and Kuo, and claims 7–8 as anticipated by Huang2; claims 2–3 were not shown unpatentable.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for patent owner

      “(“POSITA”) “would be a Ph.D. student with a minimum of two years of experience in their faculty advisor’s laboratory” and would have an understanding of “electrospinning fibers, including for tissue engineering, tissue engineering techniques, and using/performing FFT analysis.” Pet. 20– 21 (citing Ex. 1003 § II.C7). Patent Owner does not dispute Petitioner’s proposal but specifies the set of disciplines within which the Ph.D. would have been earned, namely “bioengineering, chemical engineering, mechanical engineering, or a related engineering discipline.” PO Resp. 6. We adopt and apply Petitioner’s proposal as clarified by Patent Owner regarding the Ph.D. discipline.” slip op. at 7

    • Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed board ownDecided for patent owner

      “At the outset, we agree with Patent Owner that the Specification purports to define “major peaks” in the following sentence: “The ‘major peaks’ herein refer to peaks higher than the average of the peaks in the result.” Ex. 1001, 13:28–29. We determine that this language satisfies at least two of the criteria set forth in Alnylam. Specifically, the sentence at “refers to” to explain what qualifies as major peaks. That is not the end of the inquiry, however, as we find there is still some ambiguity as to whether the patentee intended to define “major peaks” so as to require so-called “minor peaks” in the claimed invention. See Bell Atlantic, 262 F.3d at 1268 (“[T]he intrinsic evidence must ‘clearly set forth’ or ‘clearly redefine’ a claim term so as to put one reasonably skilled in the art on notice that the patentee intended to so redefine the claim term.”). Importantly, the Specification does not treat the existence of minor peaks as prerequisites for the existence of major peaks. Indeed, the Specification does not discuss “minor peaks” at all. See generally Ex. 1001. Likewise, none of the claims of the ’227 patent, whether challenged or unchallenged, recites “minor peaks” or any additional peaks beyond the disputed “major peaks.” Id. at 23:30–24:42. Nor does the Specification include an example of FFT analysis results in which the average of the peaks therein is calculated and those higher than the average are identified as major peaks.8” slip op. at 9

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundMixed

      “Petitioner has the better position. Huang2 teaches crosslinking and provides a reason for doing so (stability). In particular, Huang2 states: “To better mimic skin ECM, electrospun collagen fibers have been fabricated, however, the rapid degradation and poor mechanical properties determine that either crosslinking or combination with other materials is necessary to obtain a stable scaffold.” Ex. 1005, 1791 (emphasis added). It is true that, in describing work actually carried out, Huang2 states that blending with PCL was performed and does not mention crosslinking. See id. at 1792 (“Nanofibrous matrices of PCL and Collagen at a weight ratio of 3:1 were fabricated using electrospinning as previously described.”). However, the prior art – here, Huang2 – is not limited to that which it describes having created. See In re Mills, 470 F.2d 649, 651 (C.C.P.A. 1972) (“a reference is not limited to the disclosure of specific working examples”); see also In re Lemelson, 397 F.2d 1006, 1009 (CCPA 1968) (“The use of patents as references is not limited to what the patentees describe as their own inventions or to the problems with which they are concerned. They are part of the literature of the art, relevant for all they contain.”); In re Fritch, 972 F.2d 1260, 1264 (Fed. Cir. 1992) (“It is well settled that a prior art reference is relevant for all that it teaches to those of ordinary skill in the art.”). Huang2 teaches two stabilization methods when using collagen in scaffolds. Huang2 states that one or the other “is necessary to obtain a stable scaffold” (when using collagen), but it does not preclude or teach away from using Patent Owner-cited testimony of Dr. Mikos is not as definitive as Patent Owner suggests; Dr. Mikos’s testimony is that a person of ordinary skill in the art “typically would not have done both.” Ex. 2015 ¶64 (emphasis added). The bottom line is that Huang2 teaches the person of ordinary skill in the art two ways to stabilize scaffolds/matrices comprised of collagen, provides a reason for doing so (stability), and does not teach away from using both. We are persuaded that a “scaffold comprising crosslinked fibers comprising collagen” would have been obvious in view of the cited teachings of Huang2.” slip op. at 33

    • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

      “We are not persuaded by Appellant’s citations to either reference. As discussed above, Petitioner’s Ground 1 is premised on a person of ordinary skill in the art altering the native flat sheet structure of Huang2 by rolling it into a jelly-roll structure as taught by Kuo. See Pet. 41 (Beginning its claim 2 arguments with the following: “Claim 1 is obvious for the reasons expressed above in § X.A., supra, which are incorporated herein.”); see also Pet. Reply 17 (“[B]ased on the explicit teaching of Kuo, a POSA would have been motivated to take the electrospun flat scaffold made by the techniques of Huang2, seed it with the desired cells, and roll it to treat a tendon and ligament.” (emphasis added)). Indeed, the paragraphs of Kuo that Petitioner cites for disclosing “scaffold sheets,” explicitly describe rolling them into jelly-roll like structures. See Ex. 1018 ¶7 (stating that “the sheet is spirally contacting a scaffold sheet of fibrous material with a cell; and rolling the scaffold sheet in a jelly-roll like manner to form a spirally wound tissue construct”), ¶22 (describing a method comprising “forming a tissue construct by contacting a scaffold sheet of fibrous material with a cell; and rolling the scaffold sheet in a jelly-roll like manner to form a spirally wound tissue construct” and implanting it in a patient). Petitioner fails to argue that that “one or more elongated sheets” recited in claim 2 would encompass the rolled structure of its proposed modification. Nor does Petitioner articulate a claim construction argument that could support such an argument. Petitioner has failed to prove, by a preponderance of the evidence, that claim 2 would have been obvious over Huang2 and Kuo.” slip op. at 42

    Patent outcomesUS 11,318,227 mixed
    Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · Markman · KSR
    Patents in suitUS 11,318,227
  • PTAB · Aug 4, 2026 · IPR2025-00248 · APJ Michael J Fitzpatrick · IPR · Final written decision

    Claims 1–3 and 5–12 are unpatentable as anticipated by Huang2; claim 4 is unpatentable as obvious over Huang2 and Kumbar. Lee grounds failed.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “understanding of “electrospinning fibers, including for tissue engineering, tissue engineering techniques, and using/performing FFT analysis.” Pet. 18– 19 (citing Ex. 1003 § II.C5). Patent Owner does not dispute Petitioner’s proposal but specifies the set of disciplines within which the Ph.D. would have been earned, namely “bioengineering, chemical engineering, mechanical engineering, or a related engineering discipline.” PO Resp. 5–6. We adopt and apply Petitioner’s proposal as clarified by Patent Owner regarding the Ph.D. discipline.” slip op. at 7

    • Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed board ownDecided for patent owner

      “A patentee “may choose to be his own lexicographer and use terms in a manner other than their ordinary meaning, as long as the special definition of the term is clearly stated in the patent specification or file history.” Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996) (citing Hoechst Celanese Corp. v. BP Chemicals Ltd., 78 F.3d 1575, 1578 (Fed. Cir. 1996)); see Markman v. Westview Instruments, Inc., 52 F.3d 967, 980 (Fed. Cir. 1995) (en banc) (“[A]ny special definition given to a word must be clearly defined in the specification.”), aff'd, 517 U.S. 370 (1996); CCS Fitness, Inc. v. Brunswick Corp., 288 F.3d 1359, 1366 (Fed. Cir. 2002). “[T]he intrinsic evidence must ‘clearly set forth’ or ‘clearly redefine’ a claim term so as to put one reasonably skilled in the art on notice that the patentee intended to so redefine the claim term.” Bell Atlantic Network Services, Inc. v. Covad Communications Group, Inc., 262 F.3d 1258, 1268 (Fed. Cir. 2001). Among the criteria to consider in whether the patentee acted as a lexicographer to define a claim term include (a) whether the patent specification included the statement in question under a section for marks, (c) whether the sentence uses the term “refer to,” which generally “conveys an intent for [that sentence] to be definitional,” and (d) whether there are other non-limiting terms (e.g., “for example,” or “include”) that contradict a definitional intent. Alnylam Pharms., Inc. v. Moderna, Inc., 138 F.4th 1326, 1333 (Fed. Cir. 2025) (alteration in original). At the outset, we agree with Patent Owner that the Specification purports to define “major peaks” in the following sentence: “The ‘major peaks’ herein refer to peaks higher than the average of the peaks in the result.” Ex. 1001, 13:6–7. We determine that this language satisfies at least two of the criteria set forth in Alnylam. Specifically, the sentence at issue sets out “major peaks” in quotation marks, and then uses the term “refers to” to explain what qualifies as major peaks. That is not the end of the inquiry, however, as we find there is still some ambiguity as to whether the patentee intended to define “major peaks” so as to require so-called “minor peaks” in the claimed invention. See Bell Atlantic, 262 F.3d at 1268 (“[T]he intrinsic evidence must ‘clearly set forth’ or ‘clearly redefine’ a claim term so as to put one reasonably skilled in the art on notice that the patentee intended to so redefine the claim term.”).” slip op. at 8

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

      “As discussed above, we agree with Patent Owner that the sentence it cites from the Specification of the ’223 patent bears sufficient hallmarks of lexicography. However, the Specification nonetheless lacks any indication that so-called “minor peaks” are a necessary component of the claimed invention. “Although it is firmly settled that an applicant may act as a 9 Figure 8B does not contain “major peaks” despite clearly depicting two “peaks higher than the average of the [three or possibly four] peaks in the result” because none of the peaks is a reflection of fiber alignment. 10 After presenting claim construction arguments based on Ayres 2008, Patent Owner confusingly states: “Finally, whether Ayres-2008 supports [Patent Owner’s] construction is irrelevant.” PO Sur-Reply 5 (emphasis added). definition that is contrary to the ordinary meaning of a claim term unless it communicates a deliberate and clear preference for this alternative definition.” Kumar v. Ovonic Battery Co., 351 F.3d 1364, 1368 (Fed. Cir. 2003). There is no indication that the patentee sought to require “minor peaks” within the scope of the claimed invention. Nor are we persuaded that a person of ordinary skill in the art would readily understand the scope of the term “major peaks” to require non-major peaks. We interpret the Specification’s statement that “‘major peaks’ herein refer to peaks higher than the average of the peaks in the result” (Ex. 1001, 13:6–7) to be teaching a person of ordinary skill in the art how to identify or discern “major peaks,” which indicate a principal axis of alignment, from any non-major peaks, which would be caused by something else. We conclude that a person of ordinary skill in the art would consider “major peaks” as used in the ’223 patent as referring to peaks that reflect the sole axis or primary axis of fiber alignment. See, e.g., id. at code (54) (“ALIGNED FIBER AND METHOD OF USE THEREOF”), code (57) (“A scaffold comprising an aligned fiber.”), 1:6–7 (“The invention relates to an aligned fiber and method of use thereof.”), 1:11–12 (“The invention relates to a scaffold comprising an aligned fiber.”), 13:16–17 (“Alignment of the fibers in the scaffold may be measured by a fast Fourier transform (FFT) analysis.”). This would certainly include peaks materially higher than the average of the peaks in the result, but it would not be limited to situations involving peaks of different heights or require so-called minor peaks. Based on the totality of the evidence before us, we do not construe the claims to require non-major peaks.” slip op. at 16

    • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableNot shown unpatentableMixed

      “Petitioner argues that, for the aligned sample, a major peak occurs at about 90° as identified by Petitioner’s annotation (red arrow). Pet. 30–31. As support, Petitioner directs us to Huang2’s explicit description of what the peak indicates, namely that “[t]he narrow peak of the normalized intensity values in anisotropic [aligned] matrices (Figure 1C) indicated that PCL/Coll nanofibers aligned along a single axis (Fig. 1B).” Id. at 31 (alterations in original) (quoting Ex. 1005, 1794). Patent Owner disputes that the illustrated peak is a major peak solely based on the lack of any lesser peaks. See PO Resp. 13 (“[T]he height of the sole peak is identical to—not higher than—the average height of the peaks in the result.”). As discussed above, however, we do not construe “major peaks” as requiring the existence of non-major peaks. We find that the illustrated peak in the Aniso plot of the FFT analysis results (Figure 1C) is a major peak within the meaning of the claim. The evidence in support of this finding is overwhelming. First, the term “Aniso” as used in Huang2 refers to fibers “with alignment.” Ex. 1005, 1792. Huang2 describes fabricating such matrices of aligned fibers with electrospinning, the same method used to impart alignment in the ’223 patent. Id. at 1791–92. Huang2 visually confirms that the fibers in fact are aligned via scanning electron microscopy. Id. at Fig. 1B. Further, Huang2 explicitly states that the peak illustrated in the Aniso plot of the FFT analysis results (Figure 1C) is caused by the fact that the “PCL/Coll nanofibers aligned along a single axis (Fig. 1B).” Id. at 1794. This is precisely what electrospinning may yield aligned fibers and images of aligned fibers will yield FFT results with major peaks. Ex. 1001, 2:18–19, 4:46–60, 13:16–26. Additionally, Huang2 itself considers the peak illustrated in the Aniso plot of the FFT analysis to be significant, stating: “In contrast [to the Aniso plot], the lack of a significant peak for the fibers collected on a stationary surface [(i.e., without electrospinning)] demonstrated no preferred fiber orientation in the isotropic matrices” (i.e., the Iso plot). Ex. 1005, 1794. Indeed, the asserted major peak in the Aniso plot shown in Huang2’s Figure 1C is higher than any other data point on the plot. For these reasons, we find the peak to be a major peak.15 Petitioner acknowledges that Figure 1C only reports its results” slip op. at 32

    Patent outcomesUS 10,137,223 unpatentable
    Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · Markman
    Patents in suitUS 10,137,223
  • PTAB · Aug 3, 2026 · IPR2025-00283 · APJ Lilan Ren · IPR · Final written decision

    The Board cancelled claim 11 and granted substitute claims 14–16, finding Petitioner had not shown those claims unpatentable on any asserted ground.

    RulingsFinal written decision
    • PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend, grantedGranted

      “must determine whether the motion to amend meets the statutory and regulatory requirements set forth in 35 U.S.C. § 316(d) and 37 C.F.R. § 42.121. Lectrosonics, Paper 15 at 4. In that regard, Patent Owner bears the burden of persuasion to show that: (1) the amendment proposes a reasonable number of substitute claims; (2) the amendment responds to a ground of unpatentability involved in the trial; (3) the amendment does not seek to enlarge the scope of the claims of the patent or introduce new subject matter;” slip op. at 9

    • ExcludeMotion to exclude, deniedDenied

      “In this case, Patent Owner’s expert “Dr. Zhou signed the second declaration, stood behind its contents, and was available for cross-examination.” Paper 35, 4. Petitioner does not dispute this statement. Paper 39, 1. Petitioner does not identify any specific undue prejudice caused by Exhibit 2008. For example, Petitioner argues that “the failure to impress upon a witness that a statement is under oath goes to the heart of its reliability as evidence” and that “as the Board has recognized, hearsay is inherently unreliable” without specifying what statement in Exhibit 2008 lacks reliability. Paper 39, 4. Because Petitioner does not provide specific evidence of undue prejudice, we find Petitioner has suffered no such undue prejudice in this case. See Liquidia, 2021 WL 4860773 at *25. We therefore deny Petitioner’s Motion to Exclude on the basis of lack of authenticity. With regard to the assertion that Exhibit 2008 is hearsay, Petitioner objects to the exhibit because the testimony is based “on other informal and unpublished documents that are hearsay under FRE 802.” Paper 29, 1. Petitioner does not specify what such “informal and unpublished documents” are. See id. Federal Rule of Evidence 703 expressly states, “[a]n expert may base an opinion on fact or data in the case that the expert has been made aware of or personally observed.” The facts or data “need not be deny Petitioner’s Motion to Exclude on the basis of hearsay.” slip op. at 50

    • Disclosure Requirements (§112) › Written description (Ariad)Written description adequateNot shown unpatentable

      “Petitioner’s argument is unpersuasive. Paragraph 59 of the ’503 application describes formula 8-1 but does not support Petitioner’s argument that other unknown formulas may be included in the recited modified heavy chains. Ex. 2003 ¶ 59. Petitioner’s hypothesis that the recited heavy chains may (or may not) encompass unknown formulas is also inapposite to the written description inquiry before us — that is, whether the inventor was in possession of the subject matter recited in claims 14–16 based on the disclosure including formulas 8-1, 8-2, and 8-3. See PowerOasis, 522 F.3d at 1306.” slip op. at 14

    • Disclosure Requirements (§112) › Enablement (Wands, Amgen full scope)EnabledNot shown unpatentable

      “These arguments in the Sur-Reply are unpersuasive to show a lack of enablement first and foremost because the arguments do not specifically provide evidence showing that any purported experimentation is undue. See Sur-Reply 2–8 (asserting, but without providing evidence under any specific Wands factors, that the examples and guidance in the specification do not extend to the broad scope of all antibodies); see Wands, 858 F.2d at 737. We again emphasize that the analysis of undue experimentation does not necessarily require every Wands factor to be explicitly addressed but the analysis must be based on “weighing many factual considerations” depending on the nature of the invention and underlying art. Cephalon, Inc. v. Watson Pharms., Inc., 707 F.3d 1330, 1336 (Fed. Cir. 2013). The assertion that the claim scope is broad alone does not suffice to show a lack of enablement based on the record before us. Moreover, as we note supra, Petitioner’s claim scope argument is based on the false premise that the scope of claims 14–16 is as broad as the claim term “antibody” without taking into account all other claim elements. For example, Petitioner does not disagree with Patent Owner’s statement that “[t]he ’675 Patent’s specification discloses the structural modification site, the chemistry used to modify that residue, and working examples demonstrating the modification” (Reply 2), but asserts only that “[t]he disclosure of SSFI that only binds to IgG1 Fc domains (SEQ ID NO:1) is . . . . inconsistent with the expansive scope of the claims.” Sur-Reply 5. Petitioner’s argument that the claims encompass proteins that lack a lysine reside at a 248 position improperly excludes from the claim language the “lysine residue at 248 position . . . [as] determined by the EU numbering system” that claims 14–16 require. As Dr. Zhou testifies, “each proposed lysine residue at position 248 (EU numbering) is covalently modified with a specific attachment with a terminal bio-orthogonal click-chemistry functional group. The specification describes targeted transfer of a chemical functional group to lysine 248” and when claims 14–16 are considered in their entirety, which includes all claim elements, “[a] POSA would understand the claim itself to limit the modified antibodies to those with lysine at position 248.” Ex. 2004 ¶ 48; Ex. 2008 ¶ 47. We also note that Patent Owner states “a POSA would understand that the phrase ‘one or more modified heavy chain’ encompasses antibodies within typical DAR distributions (i.e., fractional numbers) rather than requiring a distinct process for producing antibodies bearing modified heavy chains in exact integers.” Reply 2–3. Moreover, Patent Owner states that PepTalk Presentation demonstrates that “a POSA would understand antibody conjugation products to exist as mixtures rather than discrete whole number species” because PepTalk Presentation “presents DAR values as non-integer measurements, i.e. DARs of 1.8 and 1.9 reflecting such distributions.” Id. at 3 (citing Ex. 1007, 28). According to Patent Owner, “preparations having an average DAR of approximately 1.8 (commonly referred to in practice as ‘DAR2’) may reflect typical reaction distributions in which some antibodies contain two modified heavy chains while others contain fewer.” Id. at 3 (citing Ex. 2008 ¶ 46). Petitioner does not rebut these statements. See Sur-Reply 2–8. Based on the foregoing, the evidence before us does not show any” slip op. at 27

    Patent outcomesUS 11,896,675 not shown unpatentable
    § 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham · Nautilus
    Patents in suitUS 11,896,675
  • PTAB · Jul 27, 2026 · IPR2025-00565 · APJ Michael R Zecher · IPR · Final written decision

    Claims 1–5 are unpatentable because Amazon showed they are anticipated by Shin; the Board did not reach Amazon’s contingent obviousness ground over Shin.

    RulingsFinal written decision
    • BurdenOther

      “Written Decision under 35 U.S.C. § 318(a) as to the patentability of claims 1–5 of the ’337 patent. For the reasons we identify below, we hold that Amazon has demonstrated by a preponderance of the evidence that these claims are unpatentable.” slip op. at 2

    • Skill levelOther

      “2. Level of Skill in the Art In determining whether an invention would have been obvious, we” slip op. at 18

    • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

      “1. Principles of Law To establish anticipation, “all of the elements and limitations of the” slip op. at 17

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableNot shown unpatentableMixed

      “1. Principles of Law To establish anticipation, “all of the elements and limitations of the” slip op. at 17

    Patent outcomesUS 11,069,337 unpatentable
    Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
    Patents in suitUS 11,069,337
  • PTAB · Jul 27, 2026 · IPR2025-01570 · APJ Monica S Ullagaddi · IPR · Final written decision

    The majority held claims 1–19 not shown unpatentable: Wang did not anticipate claims 1–10, and Wang with Xiong did not render claims 11–19 obvious.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedOther

      “field of the ’690 Patent would have had at least (1) an undergraduate degree in electrical engineering, computer engineering, computer science, or a comparable field of study and (2) at least two years of experience with optical data communications or a comparable field of work.” Pet. 14 (citing Ex. 1003 ¶ 22). Petitioner also states that “[i]ndividuals having different educational backgrounds and supplemental experience might still be of ordinary skill in the art if such experience compensates for any deficiencies in education relative to the criteria stated above” and “[i]n some cases, additional education might be an acceptable substitute for some experience, or vice versa.” Id. Patent Owner does not dispute Petitioner’s characterization of the level of skill in the art. See e.g., PO Resp. 9. We adopt Petitioner’s unopposed definition of the level of ordinary skill in the art as it appears consistent with the disclosures of the ’690 patent and the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “Patent is self-explanatory and would have been recognized by a [person of ordinary skill in the art] as having plain and ordinary meanings.” Pet. 10. “Petitioner submits that no special constructions are required” because “the claim terms appear understandable in the context of the disclosure provided by the specification of the ’690 Patent.” Id. (citing Ex. 1003 ¶ 58). Patent Owner “agrees that the claim terms should be given their plain and ordinary meaning as understood by a [person of ordinary skill in the art].” PO Resp. 10. After reviewing the arguments and evidence before us, we determine that we do not need to expressly construe any claim term to resolve any controversy in the proceeding. Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 8

    • BurdenNot shown unpatentable

      “Also relevant to our analysis is that this is an anticipation ground and Petitioner is required to show that the reference discloses not only the elements of the claimed invention, but also discloses those elements as arranged in the claim. Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1371 (Fed. Cir. 2008). Although our Institution Decision concluded that Petitioner had demonstrated a reasonable likelihood of prevailing with respect to its anticipation challenge to independent claim 1 applying Wang (Inst. Dec. 6), at this stage of the proceeding we are required to evaluate Petitioner’s challenges under a higher standard, the preponderance of evidence standard. For the foregoing reasons, we are not persuaded that Petitioner sufficiently establishes that claim 1 is unpatentable under 35 U.S.C. § 102 as anticipated by Wang by a preponderance of the evidence.” slip op. at 13

    • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

      “Wang discloses that “the isolator 100 is bonded to the substrate by means of an adhesive” in which “[t]he adhesive is not only used to fix the isolator 100 to the substrate, but also fills a gap between the isolator 100 and the substrate to improve the installation accuracy of the isolator 100.” Ex. 1006 ¶ 41 (emphasis added). Petitioner does not explain how filling in a gap between the isolator 100 and a substrate necessarily results in “each of the plurality of optical isolators [being] disposed substantially in parallel relative to each other,” as recited in claim 1. The cited portion in paragraph 43 references Figures 5 and 6, which depict Embodiment 1 of Wang and are reproduced below. Figures 5 and 6 of Wang depict isolators 100, base 311, and baffles 312. Although paragraph 44 of Wang states that “[t]he substrate includes a base 311, and baffles 312 and isolators 100 sequentially disposed on the base 311,” Petitioner does not sufficiently persuade us how Wang’s disclosure “sequentially disposed” isolators necessarily discloses that the isolators are “disposed substantially in parallel relative to each other” as recited in independent claim 1. Ex. 1006 ¶ 44. Although the cited portion in Figure 6 of Wang apparently shows a possibly parallel arrangement of Petitioner cites to Dr. Kirk’s Declaration, but Dr. Kirk does not opine on why cited portions of Wang necessarily disclose or depict the claimed “disposed substantially in parallel relative to each other” requirement. Ex. 1003 ¶¶ 73, 74; Ex. 1006 ¶¶ 41, 43, Figs. 6, 8, 10. At best, Dr. Kirk testifies that “a POSITA would have understood that Wang anticipates Claim 1.” Ex. 1003 ¶ 75. Also relevant to our analysis is that this is an anticipation ground and Petitioner is required to show that the reference discloses not only the elements of the claimed invention, but also discloses those elements as arranged in the claim. Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1371 (Fed. Cir. 2008). Although our Institution Decision concluded that Petitioner had demonstrated a reasonable likelihood of prevailing with respect to its anticipation challenge to independent claim 1 applying Wang (Inst. Dec. 6), at this stage of the proceeding we are required to evaluate Petitioner’s challenges under a higher standard, the preponderance of evidence standard.” slip op. at 12

    Patent outcomesUS 10,788,690 not shown unpatentable
    Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 10,788,690
  • PTAB · Jul 27, 2026 · IPR2025-00437 · APJ Monica S Ullagaddi · IPR · Final written decision

    The majority held claims 1–19 not unpatentable: Wang did not establish anticipation of claims 1–10, and Wang with Xiong did not establish obviousness of claims 11–19.

    RulingsFinal written decision
    • BurdenNot shown unpatentable

      “Wang discloses that “the isolator 100 is bonded to the substrate by means of an adhesive” in which “[t]he adhesive is not only used to fix the isolator 100 to the substrate, but also fills a gap between the isolator 100 and the substrate to improve the installation accuracy of the isolator 100.” Ex. 1006 ¶ 41 (emphasis added). Petitioner does not explain how filling in a gap between the isolator 100 and a substrate necessarily results in “each of the plurality of optical isolators [being] disposed substantially in parallel relative to each other,” as recited in claim 1. The cited portion in paragraph 43 references Figures 5 and 6, which depict Embodiment 1 of Wang and are reproduced below. Figures 5 and 6 of Wang depict isolators 100, base 311, and baffles 312. Although paragraph 44 of Wang states that “[t]he substrate includes a base 311, and baffles 312 and isolators 100 sequentially disposed on the base 311,” Petitioner does not sufficiently persuade us how Wang’s disclosure “sequentially disposed” isolators necessarily discloses that the isolators are “disposed substantially in parallel relative to each other” as recited in independent claim 1. Ex. 1006 ¶ 44. Although the cited portion in Figure 6 of Wang apparently shows a possibly parallel arrangement of Petitioner cites to Dr. Kirk’s Declaration, but Dr. Kirk does not opine on why cited portions of Wang necessarily disclose or depict the claimed “disposed substantially in parallel relative to each other” requirement. Ex. 1003 ¶¶ 73, 74; Ex. 1006 ¶¶ 41, 43, Figs. 6, 8, 10. At best, Dr. Kirk testifies that “a POSITA would have understood that Wang anticipates Claim 1.” Ex. 1003 ¶ 75. Also relevant to our analysis is that this is an anticipation ground and Petitioner is required to show that the reference discloses not only the elements of the claimed invention, but also discloses those elements as arranged in the claim. Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1371 (Fed. Cir. 2008). Although our Institution Decision concluded that Petitioner had demonstrated a reasonable likelihood of prevailing with respect to its anticipation challenge to independent claim 1 applying Wang (Inst. Dec. 6), at this stage of the proceeding we are required to evaluate Petitioner’s challenges under a higher standard, the preponderance of evidence standard.” slip op. at 12

    • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

      “Wang discloses that “the isolator 100 is bonded to the substrate by means of an adhesive” in which “[t]he adhesive is not only used to fix the isolator 100 to the substrate, but also fills a gap between the isolator 100 and the substrate to improve the installation accuracy of the isolator 100.” Ex. 1006 ¶ 41 (emphasis added). Petitioner does not explain how filling in a gap between the isolator 100 and a substrate necessarily results in “each of the plurality of optical isolators [being] disposed substantially in parallel relative to each other,” as recited in claim 1. The cited portion in paragraph 43 references Figures 5 and 6, which depict Embodiment 1 of Wang and are reproduced below. Figures 5 and 6 of Wang depict isolators 100, base 311, and baffles 312. Although paragraph 44 of Wang states that “[t]he substrate includes a base 311, and baffles 312 and isolators 100 sequentially disposed on the base 311,” Petitioner does not sufficiently persuade us how Wang’s disclosure “sequentially disposed” isolators necessarily discloses that the isolators are “disposed substantially in parallel relative to each other” as recited in independent claim 1. Ex. 1006 ¶ 44. Although the cited portion in Figure 6 of Wang apparently shows a possibly parallel arrangement of Petitioner cites to Dr. Kirk’s Declaration, but Dr. Kirk does not opine on why cited portions of Wang necessarily disclose or depict the claimed “disposed substantially in parallel relative to each other” requirement. Ex. 1003 ¶¶ 73, 74; Ex. 1006 ¶¶ 41, 43, Figs. 6, 8, 10. At best, Dr. Kirk testifies that “a POSITA would have understood that Wang anticipates Claim 1.” Ex. 1003 ¶ 75. Also relevant to our analysis is that this is an anticipation ground and Petitioner is required to show that the reference discloses not only the elements of the claimed invention, but also discloses those elements as arranged in the claim. Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1371 (Fed. Cir. 2008). Although our Institution Decision concluded that Petitioner had demonstrated a reasonable likelihood of prevailing with respect to its anticipation challenge to independent claim 1 applying Wang (Inst. Dec. 6), at this stage of the proceeding we are required to evaluate Petitioner’s challenges under a higher standard, the preponderance of evidence standard. For the foregoing reasons, we are not persuaded that Petitioner” slip op. at 12

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached

      “challenge set forth in the Petition by citing the background of the ’690 patent and Dr. Willner’s deposition testimony and characterizing the same as “admissions” of Patent Owner in Petitioner’s Reply, such “evidence” did not form the basis of Appellant’s original position set forth in the Petition.6 Petitioner’s arguments that all of the components recited in claim 11 “were known in the prior art” or that Dr. Willner admitted the same are unpersuasive at least because the Petition did not set forth this position. Contrary to Petitioner’s arguments during the oral hearing, the Petition does not present challenges based on “Applicant Admitted Prior Art.” See generally Pet.” slip op. at 23

    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “field of the ’690 Patent would have had at least (1) an undergraduate degree in electrical engineering, computer engineering, computer science, or a comparable field of study and (2) at least two years of experience with optical data communications or a comparable field of work.” Pet. 14 (citing Ex. 1003 ¶ 22). Petitioner also states that “[i]ndividuals having different educational backgrounds and supplemental experience might still be of ordinary skill in the art if such experience compensates for any deficiencies in education relative to the criteria stated above” and “[i]n some cases, additional education might be an acceptable substitute for some experience, or vice versa.” Id. Patent Owner does not dispute Petitioner’s characterization of the level of skill in the art. See e.g., PO Resp. 9. We adopt Petitioner’s unopposed definition of the level of ordinary skill in the art as it appears consistent with the disclosures of the ’690 patent and the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7

    Patent outcomesUS 10,788,690 not shown unpatentable
    Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 10,788,690
  • PTAB · Jul 15, 2026 · IPR2026-00100 · APJ Thu A Dang · IPR · Adverse judgment

    The Board granted adverse judgment against SitNet after its disclaimer left no challenged claims remaining in the instituted trial.

    RulingsAdverse judgment
    • Adverse judgmentAdverse judgmentGranted

      “judgment include: . . . [c]ancellation or disclaimer of a claim such that the party has no remaining claim in the trial.” 37 C.F.R. § 42.73(b)(2). “The application of the [adverse judgment] rule on its face does not turn on the patentee’s characterization of its own request.” Arthrex, Inc. v. Smith & Nephew, Inc., 880 F.3d 1345, 1349 (Fed. Cir. 2018). In this case, Patent Owner’s disclaimer of all claims of the ’290 patent leaves no claims remaining in the trial. Although Patent Owner argues that “it was filed to conserve the limited resources of the Board and the Parties in light of the fact that the ’290 Patent is no longer involved in any copending litigation” (Ex. 3001), we deem such argument not a persuasive reason as to why we should not apply § 42.73(b)(2), or why termination is more appropriate. Pursuant to 37 C.F.R. § 42.73(b)(2), we construe Patent Owner’s disclaimer of all claims at trial as a request for adverse judgment, which we grant.” slip op. at 3

    None
    Patents in suitUS 10,117,290
  • Klipsta Pty Ltd v. Lindsay AlbaneseSome claims unpatentable
    PTAB · Jul 10, 2026 · IPR2025-00346 · APJ Annette R Reimers · IPR · Final written decision

    Claim 16 is unpatentable as obvious over the asserted grounds; claims 1–15, 17, and 18 were not shown unpatentable.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995). Petitioner contends that a person having ordinary skill in the art at the time of the invention (“POSITA”) “would be a regular consumer/shopper with a rudimentary knowledge of the use of magnetic clips and a basic understanding of clip construction.” Pet. 13. We find that the ’047 patent and the cited prior art references reflect the appropriate level of skill at the time of the claimed invention and that the level of skill reflected in these references and in the ’047 patent is consistent with the definition of a person of ordinary skill in the art proposed by Petitioner. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 10

    • BurdenMixed

      “Petitioner’s mapping of the components of KR ’458’s fastening device is insufficient. Although Petitioner maps the center line of fastening member 115 to the recited second end, Petitioner fails to adequately map the recited first end of the second strap or explain why one of skill in the art would consider the second ferromagnetic member (convex member 117) to be disposed at the first end of the second strap as required by claim 1. that the first end is “upward to connector 117.” Pet. 24. This is not the end of the second strap. As discussed above, the end of the second strap wraps around rectangular ring 210 and is then secured to itself.7 Connector 117 is positioned below the true end of the strap, more in the middle of this segment of the strap. In other words, Petitioner arbitrarily defines the strap as only the portion of hat holder 110 between the center line and connector 117, in contradiction to what KR ’458 actually discloses. Nowhere does Petitioner explain why connector 117 is disposed at the first end of the second strap. Neither does Petitioner explain why we should disregard the true end of the strap, nor why one of skill in the art would consider only a middle portion of the strap to be the second strap. Thus, Petitioner has not satisfied its burden in this regard. Therefore, Petitioner has not shown that KR ’458 discloses “a second strap having a first end and a second end, the second strap joined to the first strap,” with “a second ferromagnetic member disposed at the first end of the second strap.” For the foregoing reasons, we determine that a preponderance of the evidence does not support that claim 1 is anticipated by KR ’458.” slip op. at 23

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionDecided for petitioner

      “The ’047 patent discloses that in addition to being separate straps, the rear strap and the front strap “can be formed from a single piece of material.” Ex. 1001, 3:40–44, 5:24–32, 10:18–25. In particular, Figures 5A–5B of the ’047 patent illustrate rear strap 510 and front strap 520 as being “formed from a single piece of material that is folded approximately in half where a first half can be the rear strap 510 and a second half can be the front strap 520.” Id. at 10:18–21, Figs. 5A–5B. Indeed, Patent Owner acknowledges “[i]t should be noted that forming the first and second straps from a single piece of material is well within the scope of the claimed invention.” Ex. 1007, 5 (citing the ’047 patent at 3:37–44). Moreover, we note the positions taken by the parties are consistent with the fact that claim second strap are formed from a single folded strap.” Ex. 1001, 14:47–48. We, therefore, adopt Petitioner’s construction of “the second strap joined to the first strap” to include “a single piece of material.”” slip op. at 11

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITADecided for patent owner

      “Petitioner’s construction of a “hook” to include a “structure that serves to attach the hat holder to another object” is based on function, rather embodiments in the Specification of the ’047 patent. Although strap-style hook 340 of Figures 3A–3C is a flexible component rather than a more rigid component like hook 140 shown in Figures 1A–1C , both can be considered types of hooks. All of the embodiments, whether rigid or flexible, can be considered to have a hook-like structure when serving the function of attaching the hat holder to another object. Petitioner’s proposed construction would render the term “hook” meaningless, as various types of structures could be used to attach the hat holder to another object, that would not reasonably be considered to be a “hook.” For example, a snap, safety pin, ring, or button could be used to attach a hat holder to another object. Petitioner’s identification of different embodiments in the ’047 patent of hook-like structures does not show why one of skill in the art would consider almost any structure to be considered a “hook.” We, therefore, reject Petitioner’s construction of a “hook” as a “structure that serves to attach the hat holder to another object.” “wherein the first strap and the second strap are configured to retain a” slip op. at 12

    Patent outcomesUS 10,413,047 mixed
    Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 10,413,047
  • PTAB · Jul 10, 2026 · IPR2025-00147 · APJ Linda E Horner · IPR · Final written decision

    The Board found claims 1–6 and 8–20 not shown unpatentable under three obviousness grounds, principally because the proposed combinations did not establish a feasible curved battery or transparent potting encapsulating the components.

    RulingsFinal written decision
    • Skill levelSkill level board ownOther

      “at least a four-year degree in electrical engineering, mechanical engineering, biomedical engineering, optical engineering, or related field of study, or equivalent experience, and at least two years’ experience in academia or industry studying or developing physiological monitoring devices such as non-invasive biosensors. Pet. 8 (citing Ex. 1002 ¶ 29). Petitioner also contends that a person of ordinary skill would have been “familiar with, e.g., sensor system design, including inertial and other motion sensor system design, and signal processing” and that “[a] higher level of education or skill might make up for less experience, and vice versa.” Id. Patent Owner agrees with Petitioner’s proposed definition of a person of ordinary skill in the art. Resp. 25. We adopt this uncontested definition of the level of ordinary skill in the art. This definition is supported by the record and consistent with the disclosure in the ’124 patent and the references cited in the Petition.” slip op. at 10

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “We need not reach the issue of whether the preamble is limiting for purposes of determining patentability of the challenged claims. Even were we to agree with Patent Owner that the preamble is limiting and the claims are limited to a finger-worn ring wearable computer device, Petitioner has relied on Schröder in each ground to disclose a “wearable computing device configured to be worn around a finger of a wearer.” Pet. 22 (Ground 1), 45 (Ground 2, relying on Yuen for adding the functionality of light sources with a photodetector, temperature sensors, and varying the sampling frequency of sensor data acquisition), 56 (Ground 3). We agree with Petitioner that Schröder discloses such a device. Thus, no explicit claim construction is necessary for this decision.” slip op. at 11

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successReasonable expectation not foundNot shown unpatentableNot shown unpatentable

      “We are not persuaded by Petitioner’s arguments and find that Patent Owner has the better position for several reasons. First, the record supports Patent Owner’s argument that Mestas’s batteries are much too large to fit within a ring form factor, and “would have to be reduced in size on the 6 There is no Exhibit 2022 in the record of this case. magnitude of 5-10x from its current size to fit in a ring of Schröder.” Resp. 38 (citing Dr. Anthony’s cross-examination testimony at Ex. 2021, 313:12). Second, Petitioner relies on evidence in the Reply that Petitioner failed to specifically identify in the Petition. Compare Reply 3–5 (citing Ex. 1369 ¶¶ 7–14; Ex. 1079 ¶¶ 47, 71; Ex. 2022, 138:7–143:1; Ex. 1002 ¶¶ 96, 337; Ex. 2021, 12–13, 307:7–17; Ex. 2020, 212:6–214:13; Ex. 1081, 130:18–131:14; Ex. 1010 ¶ 168), 9 (referring back to Section § II.B.2) with Pet. 25–26 (citing Ex. 1002 ¶¶ 193–99; Ex. 1010 ¶¶ 157, 163, 168, 201, Fig. 6). More specifically, while the portion of Dr. Anthony’s Declaration cited in the Petition (see Pet. 25–26 (citing Ex. 1002 ¶¶ 193–99)) mentions the Technology Background Section V of his Declaration (Ex. 1002 ¶¶ 42–147), neither Petitioner nor Dr. Anthony sufficiently explains what evidence supports his opinion that it was feasible to incorporate batteries or battery-like devices into finger-rings, or how a person of ordinary skill in the art would have miniaturized a curved battery for incorporation into Schröder’s ring. Ex. 1002 ¶ 196 (describing that rechargeable batteries powering wearable electronic devices were “well-known by 2013” and “had also undergone significant advances in terms of miniaturization and energy density [that] made it feasible to incorporate batteries or battery-like devices such as supercapacitors into smaller form factors, such as finger rings, without sacrificing functionality” such as “lithium-polymer (Li-Po) batteries and solid-state batteries.”). Moreover, some of Petitioner’s citations in the Reply appear to be incorrect as there is no Exhibit 2022 of record in this case, as noted above. These issues undermine the strength of Petitioner’s showing by making it difficult to follow its reasoning, much less identify where in the record that reasoning finds support. See DeSilva v. DiLeonardi, 181 F.3d 865, 866–67 (7th Cir. 1999) (“A brief must make all arguments accessible to the judges, rather than ask them to play archaeologist with the record.”); United States v. Dunkel, 927 F.2d 955, 956 (7th Cir. 1991) (“Judges are not like pigs, hunting for truffles buried in briefs.”). Third, even considering Petitioner’s new Reply arguments and” slip op. at 27

    • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

      “We credit Dr. Mercier’s testimony over Dr. Anthony’s and agree that Dr. Anthony’s testimony fails to account for the constraints of a substantially smaller form factor in Schröder’s finger-ring as compared to Mestas’s wrist device. Ex. 2018 ¶ 140. Although large curved batteries suitable for use in a wrist band or other larger wearable device, such as shown in Mestas, were known at the time of the ’124 patent, we also have evidence that prior art “finger ring wearables up to the ’124 patent had used ‘coin’ type batteries.” Resp. 40 (citing Ex. 2018 ¶ 140). We credit Dr. Mercier’s testimony that a person having ordinary skill in the art would have looked to a coin type battery for the necessary power requirements of Schröder’s device. Ex. 2018 ¶ 141. Indeed, this testimony is consistent with the other art of record that consistently shows the use of flat batteries in finger-ring devices, often stacked above and protruding from the general ring shape of the device. See, e.g., Ex. 1005 (Niwa), Figs. 22, 28; Ex. 2025 (Asada ’701 patent), Fig. 4; Ex. 1035 (Rhee), Figs. 7-1, 8-1, 8-2; Ex. 1037 (Asada article), Fig. 9; Ex. 1034 (Asada ’199 patent), Fig. 2; Ex. 1028 (Kimura patent), Fig. 24; Ex. 2018 ¶¶ 74–84. In fact, Oura’s first-generation ring design, released in 2015, used a Superbowl ring type design, with the battery and other components mounted on top of the ring. Ex. 2034; Ex. 2018 ¶ 85. We also agree with Dr. Mercier that Dr. Anthony’s testimony lacks evidence or a technical analysis of the power requirements for the various sensors he suggests including in a wearable device and the capacity of the proposed GMBPow battery. See, e.g., Ex. 1002 ¶¶ 94, 210, 214–17; Ex. 2018 ¶ 97. Moreover, Dr. Anthony does not address the issues with the batteries that are identified in the references he discusses. For example, Dr. Anthony does not address Lee’s disclosure that “direct coating of electrode slurry onto plain paper led to the occasional internal-shorting of the device due to the leakage of the electrode material through a large-sized hole in the paper.” Ex. 1019, 2415. In contrast, Dr. Mercier discusses the pitfalls the skilled artisan faced in developing finger-ring devices. See, e.g., Ex. 2018 ¶¶ 77–79 (discussing the issues Rhee’s and Asada’s large rings), 83 (identifying power requirements as a design constraint). For example, Dr. Mercier explains that “flexible or curved batteries include flexible packaging materials such as aluminum laminated films that house the electrodes and electrolyte” such that “once the battery packaging is added to a battery such as GMBPow and then placed within a housing (e.g., external housing shell and internal potting), the resulting device would have dimensions that are not suitable for a finger-worn ring.” Id. ¶ 96 (citing Ex. 2026).” slip op. at 34

    Patent outcomesUS 11,188,124 not shown unpatentable
    Claim construction§ 103 obviousnesscites KSR · Graham
    Patents in suitUS 11,188,124
  • PTAB · Jul 10, 2026 · IPR2025-00225 · APJ Matthew S Meyers · IPR · Final written decision

    Claims 1–6, 11, 12, and 15–17 are unpatentable: claims 1–4, 6, 11, 12, 15, and 17 over Blain; claims 5 and 16 over Blain, Bray, and Steffee.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “Petitioner asserts that one of ordinary skill in the art would have had a bachelor’s or equivalent degree in mechanical engineering or a related discipline (e.g., biomedical engineering, metals and materials engineering), and at least five years of experience with a) designing, developing, evaluating and/or using spine devices, b) anatomy, physiology and biology of soft and calcified tissues including bone healing and fusion, and c) biomechanical and functional loading of orthopedic implants. Pet. 18–19 (citing Ex. 1002 ¶¶ 77–78). Petitioner also asserts that “[m]ore education can supplement practical experience and vice versa.” Id. (citing Ex. 1002 ¶ 78). “Patent Owner does not dispute the proffered definition for a POSA.” PO Resp. 10. proposed level of skill is reasonable and consistent with the ’805 patent and the asserted prior art. Thus, for these reasons, we adopt Petitioner’s level of skill in the art.” slip op. at 8

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for petitioner

      “Based on the full record, we determine that “housing,” as it appears in the context of the term “delivery housing” is a component that is a part of the delivery mechanism (see Ex. 1001, 11:27–31) and that simply contains and guides another component during delivery. See Ex. 1001, 13:25–27, 21:30–50. Thus, we apply the ordinary meaning of “housing,” as it appears in the context of the term “delivery housing,” and address in the context of “delivery housing,” as recited by claims 2 and 4.” slip op. at 12

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

      “understanding of plain and ordinary meaning as set forth in the litigation.” Pet. Reply 13 (citing Ex. 1022, 2 (“channel . . . [that] has a curved path”)). Thus, Petitioner concludes that the parties agree on construction of “curved channel.” Id. at 13–14.10 9 Although the parties refer to “curved” alone or to a “curved channel,” we understand the parties to be referring to a “channel of the fusion member [that] is curved,” as recited in claims 5 and 16. 10 At oral argument, the parties confirmed that there was no dispute as to the meaning of “curved channel.” See Tr. 15:12–14 (Petitioner stating that “the term “curved channel” appears consistent with the plain language of the claims and Specification. Thus, we adopt the parties’ agreed-upon construction and construe a channel that is “curved” to mean a channel following a curved trajectory.” slip op. at 13

    • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

      “We have considered Petitioner’s arguments and evidence, and Patent Owner’s counterarguments and find, on the complete trial record, that Petitioner demonstrates, by a preponderance of the evidence, that Blain discloses “a fusion member for positioning between two vertebral bodies, the fusion member having a first plurality of channels, each channel of the first plurality of channels having an opening on a same side of the fusion member,” as recited by limitation 1.1. At the outset, we find Patent Owner fails to establish that any of the alleged differences between Blain’s “apertures and the ’805 [p]atent’s internal channel geometry” relate to any particular recitation in argued limitation 1.1. Although we acknowledge that claims 5 and 16 each requires curved trajectories (see, e.g., claim 5 reciting “each channel of the fusion member is curved”), limitation 1.1 does not recite such a feature. As Petitioner correctly notes, “[n]othing in the claim requires a special ‘internal channel geometry,’ ‘shaped block,[’] ‘curved tubular channels,’ non ‘straight-through’ apertures, or ‘flexible’ anchors.” Pet. Reply 14 (footnote omitted). See In re Self, 671 F.2d 1344, 1348 (CCPA 1982) (rejecting arguments “not based on limitations appearing in the claims”). Therefore, after reviewing the arguments and evidence, we determine that Petitioner has shown by a preponderance of the evidence that Blain discloses the subject matter of limitation 1.1.” slip op. at 19

    Patent outcomesUS 9,730,805 unpatentable
    Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 9,730,805

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.