- Meta Platforms, Inc. v. Mullen Industries LLCAdverse judgmentPTAB · Dec 19, 2025 · IPR2025-00746 · APJ Ken B Barrett · IPR · Adverse judgment
The Board denied Mullen Industries LLC’s motion to dismiss and entered adverse judgment after institution for disclaimed claims 1–3 of U.S. Patent 10,974,151.
RulingsAdverse judgment- Adverse judgmentAdverse judgmentGranted
“We determine that Petitioner has the better position. Our rules provide that “[a] party may request judgment against itself at any time during a proceeding,” and “[a]ctions construed to be a request for adverse judgment include . . . [c]ancellation or disclaimer of a claim such that the party has no remaining claim in the trial.” 37 C.F.R. § 42.73(b)(2). “The application of the [adverse judgment] rule on its face does not turn on the patentee’s characterization of its own request.” Arthrex, Inc. v. Smith & Nephew, Inc., 880 F.3d 1345, 1349 (Fed. Cir. 2018). In this case, Patent Owner, after the institution decisions, disclaimed the challenged claims such that there are no remaining claims in the trials. Patent Owner presents no persuasive reasons why we should not apply Rule 42.73 or why termination or dismissal is more appropriate. Under the IPR2025-00745 (Patent 9,662,582 B2) IPR2025-00746 (Patent 10,974,151 B2) circumstances of these cases, we construe the filing of disclaimers as requests for adverse judgment.” slip op. at 6
- PTAB / AIA Trials › Other PTAB motions (exclude, strike, seal, additional discovery, rehearing)Denied
“Constitution that there exist a case or controversy to be adjudicated by a district court. See Sanofi-Aventis, 933 F.3d at 1372–73. The Board is not a district court or any other Article III court, and Patent Owner has not shown persuasively that Sanofi-Aventis supports its argument that dismissal, as opposed to adverse judgement, is appropriate.” slip op. at 3
NonePatents in suitUS 10,974,151 - Silencerco Weapons Research, LLC v. Huxwrx Safety Co. LLCNo claims unpatentablePTAB · Dec 17, 2025 · IPR2024-01214 · APJ Sean P O’Hanlon · IPR · Final written decision
Claims 2, 3, 6, 9, 12–14, 18, and 20 were not shown unpatentable; the motion to amend was granted for substitute claims 23, 26, 27, 29, 30, 32, 33, 37–40, and 42, and denied for …
RulingsFinal written decision- Skill levelSkill level board ownOther
“The level of ordinary skill in the art is “a prism or lens” through which we view the prior art and the claimed invention. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). The person of ordinary skill in the art is a hypothetical person presumed to have known the relevant art at the time of the invention. In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995). In determining the level of ordinary skill in the art, we may consider certain factors, including: “(1) the educational level of the inventor; (2) type of problems encountered in the art; (3) prior art solutions to those problems; (4) rapidity with which innovations are made; (5) sophistication of the technology; and (6) educational level of active workers in the field.” Best Med. Int’l, Inc. v. Elekta Inc., 46 F.4th 1346, 1353 (Fed. Cir. 2022) (quoting Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007)). “The patent’s purpose can also be informative.” Id.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“The ’750 patent states that “the fluid pathway can be a radially serpentine fluid pathway which causes the fluids received in the off axis chamber to flow back and forth around a radius of the off axis chamber,” also using “radially serpentine fluid pathway” to refer to this rotation around the chamber radius “while also traversing a length of the off axis chamber.” Ex. 1001, 4:34–41 (emphasis added). This is the only description of “radially” serpentine flow in the ’750 patent. Notably, the ’750 patent does not use “radially” or “serpentine” to describe a fluid pathway “which causes the fluids to spiral around the central chamber within the off axis chamber along a length of the off axis chamber,” instead referring to such a fluid pathway as a “helical fluid pathway.” Id. at 4:41–44. See CAE Screenplates, Inc. v. Heinrich Fiedler GmbH & Co. KG, 224 F.3d 1308, 1317 (Fed. Cir. 2000) (“In the absence of any evidence to the contrary, we must presume that the use of . . . different terms in the claims connotes different meanings.”); Bd. of Regents of the Univ. of Tex. Sys. v. BENQ Am. Corp., 533 F.3d 1362, 1371 (Fed. Cir. 2008) (“Different claim terms are presumed to have different meanings.”). Inst. Dec. 11–12. We explained that the flow path depicted above, which is equivalent to that of Figure 14 of the ’750 patent, “flows circumferentially about the central chamber.” Id. at 14. We maintain this interpretation. Stated differently, the depicted flow is around a longitudinal axis of the chamber. See MTA PG 6 (describing the flow path depicted above as “a back and forth flow path around a longitudinal axis of the off axis chamber; that is, a circumferentially serpentine pathway”); see also Ex. 2003 ¶ 40 (Dr. Neitzel describing the flow path depicted above as “a back and forth flow path around a longitudinal axis of the off axis chamber”). The flow is not around a radius of the chamber, which Patent Owner recognizes is required for a flow path to be radially serpentine. See PO Resp. 10 (“Patent Owner agrees with the Board’s conclusion in the [Institution Decision] that ‘radially serpentine’ as recited in the claims of the ’750 patent means a back and forth flow around a radius of the off axis chamber.” (citation modified)); PO Sur-reply 2 (agreeing that “radially serpentine” requires “a back and forth flow around a radius of the off axis chamber”).” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable
“We agree with Patent Owner that neither Petitioner nor its witness, Mr. Nixon, has explained adequately how Thurler’s disclosure of its tube e being perforated for two thirds of its length “contemplates other lengths of perforations.” See Pet. 48; Ex. 1013 ¶ 212. Such conclusory assertions fail to apprise us of why an ordinarily skilled artisan would have been motivated to modify Thurler’s device in contradiction to Thurler’s explicit disclosure. We are also not persuaded by Petitioner’s proffered reasoning for modifying Thurler’s device. First, the modification is not a matter of design choice because the perforations allow the gases generated by firing the projectile to pass into the space between tubes e and g where they partially expand. See Ex. 1015, 1:84–91. Thus, modifying the number of perforations necessarily affects the flow of gases through the device. Next, neither Petitioner nor Mr. Nixon explains adequately how reducing the amount of perforation in tube e results in an increased fluid length. See Pet. 49; Ex. 1013 ¶ 213. Rather, although less fluid may enter into tube e with Petitioner’s modification, it appears that that fluid would travel the same distance along tubes e and h as in Thurler’s unmodified device. Finally, neither Petitioner nor Mr. Nixon explains adequately how limiting the amount of gases generated by firing the projectile from entering the expansion zones of tubes g and h provides any benefit. To the contrary, limiting the amount of gases in the manner suggested by Petitioner would reduce the suppression of such gases, resulting in a less effective device. Moreover, Thurler discloses that “there is still a space of a few millimeters between [tubes] e and g which is necessary” to prevent the application of “pressure on the projectile causing the same to deviate.” Ex. 1015, 1:106–2:3. Thus, Petitioner’s modification would not result in the passage of gases occurring only at the first three of Thurler’s tubular sleeves as asserted by Petitioner. Additionally, in the Institution Decision, we explained that Petitioner did not provide adequate reasoning to support the proposed modification of Thurler’s device regarding parent claim 1 to have concentric tubes around the central tube e. See Inst. Dec. 29–31. This shortcoming, which we maintain, carries through to dependent claim 6. Accordingly, for the foregoing reasons, Petitioner has not shown, by a” slip op. at 26
- ScopeMotion to amend granted in partGranted in part
“We agree with Petitioner that the amendment is broadening. Petitioner’s witness testified that he “wouldn’t call a BB gun a high energy device or a high energy weapon.” Paper 33, 18:4–6. Thus, per Petitioner’s witness, use of a BB gun would not be covered by claim 22, no matter what is discharged from the BB gun. However, if high energy material is discharged from that same BB gun, that use would be covered by proposed substitute claim 43 (assuming the other claim recitations were met). See id. at 21:10–12 (Dr. Neitzel agreeing that “if something produces a high energy material, it automatically is a high energy weapon”). Thus, by deleting “high energy device” and replacing that language with “weapon,” proposed substitute claim 43 impermissibly broadens the scope of claim 22. See Sisvel Int'l S.A. v. Sierra Wireless, Inc., 81 F.4th 1231, 1241 (Fed. Cir. 2023) (“But if a substitute claim ‘is broader in any respect it is considered to be broader than the original claim even though it may be narrower in other respects.’” (citation modified) (quoting Hockerson-Halberstadt, Inc. v. Converse Inc., 183 F.3d 1369, 1374 (Fed. Cir. 1999))); see also Lectrosonics, Paper 15 at 6 (“A patent owner may not seek to broaden a challenged claim in any respect that enlarges the scope of the claims of the patent . . . . Likewise, a proposed substitute claim may not remove a feature of the claim in a manner that broadens the scope of the claims of the challenged patent.”).” slip op. at 45
Patent outcomesUS 8,286,750 not shown unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 8,286,750 - Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Ouraring, Inc.No claims unpatentablePTAB · Dec 17, 2025 · IPR2024-01077 · APJ Michael A Valek · IPR · Final written decision
Claims 1, 11, and 13–20 were not shown unpatentable over either Yuen and Mestas or Schröder and Mestas, principally because the curved-battery and waterproof-cavity showings were deficient.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“at least a four-year degree in electrical engineering, mechanical engineering, biomedical engineering, optical engineering, or related field of study, or equivalent experience, and at least two years’ experience in academia or industry studying or developing physiological monitoring devices such as non-invasive biosensors.” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner
“We agree with Petitioner that the term “ring” is not limited to a finger- worn ring. All of the challenged independent recite a “wearable ring computing device” (claims 1 and 11) or “ring computing device” (claim 14). Nothing in the claim language itself refers to where that device is worn. Moreover, the fact that Patent Owner has in several related patents added claim language to expressly recite a ring that is “finger-worn” or “worn around the finger” evidences that the plain meaning of the term “ring” by itself does not require such. Ex. 1362, 44:45–46:61 (claims 1–18); Ex. 1363, 44:64–46:56 (claims 1–17); Ex. 1364, 48:22–23 (claim 1); see Nystrom v. TREX Co., Inc., 424 F.3d 1135, 1143 (Fed. Cir. 2005) (explaining that the fact that another claim recites a “wood decking board” suggests the term “board” is not itself limited to one made from wood or cut from a log because “[w]hen different words or phrases are used in separate claims, a difference in meaning is presumed”). This understanding is further supported by the Specification of the ’859 patent. It is true, as Patent Owner asserts, that the Specification describes a preferred embodiment that is a finger-worn ring. See, e.g., Ex. 1001, Figs. 22A–B, 23A (depicting a finger-worn ring). But precedent cautions against importing limitations from the preferred embodiment into claims. See, e.g., Phillips v. AWH Corp., 415 F.3d 1303, 1323 (Fed. Cir. 2004) (en banc) (“[A]lthough the specification often describes very specific embodiments of the invention, we have repeatedly warned against confining the claims to those embodiments.”). Indeed, the Specification here anticipates such arguments and makes clear that the applicants’ wearable computing device (WCD) is not limited to a ring worn on the finger: The WCD can be in the form of a ring that can be worn on the finger of a human (or animal) user. Although the WCD of the present disclosure is depicted as a ring that can be worn on the finger of a user, other shapes, designs, and form factors can be utilized for the WCD. For example, the WCD can be in the form of a wrist band, bracelet, necklace, earring, or any other type of wearable accessory. In this regard, references to the finger of a user in the present application can be considered to apply to other portions of a human body depending on the form of the WCD, such as wrist, neck, ear, etc. Ex. 1001, 8:51–61.” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundReasonable expectation not foundNot shown unpatentable
“ordinarily-skilled artisan to modify Yuen’s device to form the waterproof cavity recited in claim 1, much less explain the particular modifications Petitioner contends that artisan would have made to Yuen’s device housing to achieve such. This is particularly problematic given that the figures Petitioner relies upon in Yuen and Mestas uniformly depict larger, wrist/arm-band type devices. See Ex. 1006, Figs. 2–13, 12:52–55 (depicting a “wrist-worn or arm-mounted accessory such as a watch or bracelet”); Ex. 1010, Figs. 1–6, ¶ 151 (same). Thus, Petitioner’s obviousness theory requires multiple modifications to Yuen’s depicted structure: (1) modifying the identified portions of Yuen’s device housing so that they form a waterproof cavity therebetween; and (2) shrinking that device and its components down to a ring designed to fit around a single toe. We credit Dr. Mercier’s testimony that such modifications would require a “complex” re-engineering of Yuen’s existing structure that Petitioner and Dr. Anthony do not sufficiently explain. See Ex. 2018 ¶¶ 108–109, 129–130, 137–138. The testimony in Dr. Anthony’s supplemental declaration does not provide the missing explanation. Dr. Anthony continues to assert that Yuen’s sensor protrusion is sealed in the space between the alleged bounding members, relying on the same annotated versions of Figures 4 and 5, without addressing the fact that according to Petitioner’s own annotations those bounding members only form a shell that is open to the attachment band at either end. See Ex. 1079 ¶¶ 26–28. Indeed, Dr. Anthony appears to acknowledge that Yuen only teaches attaching the sensor module portion of the alleged cavity with watertight glue, but asserts that “it would not make sense to have a device that is waterproof in some areas and not others.” Id. ¶ 29. That assertion, however, is not supported by anything beyond Dr. Anthony’s say-so and ignores that Yuen’s teachings regarding a watertight seal/glue refer only to the sensor package portion of the alleged cavity. See Ex. 1006, 14:66–15:4, 15:10–14. Dr. Anthony’s assertion that Mestas teaches additional “waterproofing techniques” that could be applied to Yuen’s housing is similarly cursory. See Ex. 1079 ¶ 30. He does not identify what those techniques are or how a POSITA would use them to modify Yuen. Id. Accordingly, we do not credit this testimony.” slip op. at 27
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia with nexusDecided for patent owner
“the asserted evidence of secondary considerations and a patent claim if the patentee shows that the asserted evidence is tied to a specific product and that the product ‘is the invention disclosed and claimed.’” Fox Factory, Inc. v. SRAM, LLC, 944 F.3d 1366, 1373 (Fed. Cir. 2019) (quoting Demaco Corp. v. F. Von Langsdorff Licensing Ltd., 851 F.2d 1387, 1392 (Fed. Cir. 1988) (emphasis added)). “That is, presuming nexus is appropriate when the patentee shows that the asserted objective evidence is tied to a specific product and that product embodies the claimed features, and is coextensive with them.” Id. (internal quotation marks omitted). If, on the other hand, “the thing that is commercially successful is not coextensive with the patented invention—for example, if the patented invention is only a component of a commercially successful machine or process, the patentee is not entitled to a presumption of nexus.” Id. (internal quotation marks omitted).” slip op. at 33
Patent outcomesUS 10,139,859 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,139,859 - MPL Brands NV, Inc. v. Buzzballz, LLCAll claims unpatentablePTAB · Dec 16, 2025 · IPR2024-01098 · APJ Cynthia M Hardman · IPR · Final written decision
Claims 1–6 are unpatentable as anticipated by or obvious over Kick and as obvious over Ackermann and Kaminski, with or without Hutchinson.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“(sometimes abbreviated herein as “POSITA”) would have had “(i) an associate’s or bachelor’s degree in mechanical, industrial or manufacturing engineering and (ii) at least two to three years of practical experience with designing or manufacturing mechanical products, such as food or beverage packaging. A POSITA could substitute additional education for industry experience and vice versa.” Pet. 15 (citing Ex. 1002 (Delson Decl.) ¶ 14).” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“Petitioner asserts that no claim term requires an express construction. See Pet. 15. We agree and find it unnecessary to construe any claim term to resolve the issues in this case. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 13
- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date, deniedDecided for petitioner
“is no earlier than the February 25, 2020, filing date of the ’195 application. Petitioner demonstrates by a preponderance of the evidence that the volume limitations recited in independent claim 1 and dependent claims 2 and 6 lack adequate written description support in the ’934 application as filed. See Pet. 10–11. The specification, figures, and claims of the ’934 application as originally filed do not disclose any volume limitations. See Ex. 1004 (’934 prosecution history), 1–17. Instead, the volume limitations recited in the challenged claims find their first support in Figure 7, which was filed over one month after the ’934 application was filed. Compare id. at 1–17, with id. at 34–56. The addition of new matter during prosecution of a patent application is prohibited. See 35 U.S.C. § 132(a) (“No amendment shall introduce new matter into the disclosure of the invention.”); see also 37 C.F.R. § 1.121(f); Manual of Patent Examining Procedure § 608.04. Therefore, we agree with Petitioner that “the new matter improperly added during the prosecution of the ’934 application cannot be considered part of the disclosure of the original, April 19, 2010 application and/or relied upon for claiming priority in subsequent applications.” Pet. 9.” slip op. at 20
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“obvious over Kick. Pet. 16–41. Kick published with the additional figures and disclosure the applicant submitted during prosecution of the ’934 application, and its detailed description and figures are the same as or similar to that of the ’904 patent. See id. at 16; compare Ex. 1007 (Kick), with Ex. 1001. Petitioner compares Kick to each limitation of the challenged claims. See Pet. 16–41. Based on the record before us, we find that Kick teaches or suggests each of the limitations of the challenged claims, for the reasons discussed in the Petition. See id. Accordingly, we determine that Petitioner has established by a preponderance of the evidence that Kick renders claims 1–6 of the ’904 patent unpatentable as anticipated and as obvious.” slip op. at 22
Patent outcomesUS 11,738,904 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,738,904 - Anker Innovations Ltd. v. Powermat Technologies Ltd.All claims unpatentablePTAB · Dec 5, 2025 · IPR2024-00994 · APJ Ken B Barrett · IPR · Final written decision
Claims 1–7 and 9–14 are unpatentable as obvious over the asserted combinations of Onishi, Flowerdew, Baarman392, Partovi, and Tocci.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner’s proposed experience of two years in the field of wireless/inductive charging is a bit more specific than Petitioner’s proposal of three years of experience with circuits and “familiarity with power electronics and inductive power transfer circuits.” We, however, discern little material difference between the parties’ proposed definitions. Petitioner’s definition is consistent with the level of ordinary skill reflected in the prior art references of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (recognizing that the prior art itself may reflect an appropriate level of skill in the art). For purposes of this decision, we apply Petitioner’s definition of the person of ordinary skill in the art. We note, however, that were we to adopt Patent Owner’s assessment, the outcome of this Decision would be the same.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionDecided for petitioner
“Even if the Specification identified “linear regulation/control as being a central aim” of the ’696 patent, Patent Owner has offered no persuasive reason why a linear-control-related limitation should be read into independent claim 1, and we decline to do so. Hill-Rom Servs., Inc. v. Stryker Corp., 755 F.3d 1367, 1371 (Fed. Cir. 2014) (“While we read claims in view of the specification, of which they are a part, we do not read limitations from the embodiments in the specification into the claims.” (citing Liebel–Flarsheim Co. v. Medrad, Inc., 358 F.3d 898, 904 (Fed. Cir. 2004))); cf. Ex. 1105, 40 (the District Court, in the parallel litigation, excluding a witness’s testimony that the “substantially different” term requires “allow[ance] for some incremental change (increase or decrease) in frequency while remaining in the near-linear/linear regions” because, inter alia, Powermat “fails to offer any particularized arguments explaining why the ‘allow[ance]’ construction is proper.” (alterations in original)). Patent Owner also relies on dependent claim 2, which depends from independent claim 1. PO Resp. 28–29. Dependent claim 2 adds to claim 1 the requirement that the driver be configured to increase and decrease the transmission frequency when a particular signal is received. See Ex. 1001, 28:47–54. Patent Owner asserts that this means that the driver is configured to increase/decrease the “substantially different” frequency, namely a frequency that lies within the near-linear region of a frequency-amplitude graph, and argues that, “[i]n reading claim 2 as a whole, a POSITA would understand that the ’696 Patent is directed to a linear control technique for predictably regulating power transfer.” PO Resp. 28–29 (citing Ex. 2006 ¶ 101). Even if dependent claim 2 called for linear control as Patent Owner appears to assert, we would not read such a limitation into the underlying independent claim. See Karlin Tech., Inc. v. Surgical Dynamics, Inc., 177 F.3d 968, 971–72 (Fed. Cir. 1999) (“The doctrine of claim differentiation . . . normally means that limitations stated in dependent claims are not to be read into the independent claim from which they depend.”); but see PO Sur-reply 4 (arguing for a narrower interpretation of independent claim 1 because it must be read in the context of the entire patent, which includes dependent claim 2). In light of the parties’ agreement and the Specification’s description” slip op. at 15
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“Dr. Woods testifies that Onishi’s “Paragraph [0180] is unambiguous that FIG. 4 does not illustrate the frequency-response of a single coil in isolation, but instead illustrates the ‘resonance characteristics of the primary coil L1 and the secondary coil L2’ when the coils are brought in electromagnetic proximity of each other for charging—i.e., in an inductively coupled state.” Ex. 1101 ¶ 18. Dr. Woods, in support of his opinion, notes that Onishi’s legend for Figure 4 describes f0 as the “RESONANCE FREQUENCY IN LOAD-CONNECTED STATE.” Id. We find Dr. Woods’s testimony more credible than Dr. Mercier’s. We disagree with Patent Owner’s argument (PO Resp. 35) that Petitioner’s reliance on Onishi’s Figure 4 is misplaced, and we find that Figure 4 discloses a resonant frequency of the inductive couple between the primary and secondary coils, as recited in limitations 1.4 and 1.7.” slip op. at 32
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“We do not find Patent Owner’s arguments persuasive. We agree with Petitioner that Patent Owner’s arguments are incorrectly premised on a hypothetical combination involving the bodily incorporation of the two references’ specific structures. See Pet. Reply 17. “The test for obviousness is not whether the features of a secondary reference may be bodily incorporated into the structure of the primary reference . . . . Rather, the test is what the combined teachings of the references would have suggested to those of ordinary skill in the art.” In re Keller, 642 F.2d 413, 425 (CCPA 1981); see also In re Sneed, 710 F.2d 1544, 1550 (Fed. Cir. 1983) (“[I]t is not necessary that the inventions of the references be physically combinable to render obvious the invention under review.”); In re Nievelt, 482 F.2d 965, 968 (CCPA 1973) (“Combining the teachings of references does not involve an ability to combine their specific structures.”). Rather, “if a technique has been used to improve one device, and a person of ordinary skill in the art would recognize that it would improve similar devices in the same way, using the technique is obvious unless its actual application is beyond his or her skill.” KSR Int’l Co., 550 U.S. at 417. Petitioner’s proposed combination is the application, to Onishi’s charging system, of Flowerdew’s general teaching of the technique of using an alignment mechanism in order to optimize the alignment of the inductive coils and to maximize the inductive coupling. See, e.g., Pet. 15 (“[A] POSITA would have been motivated to implement Onishi in a manner that includes an alignment mechanism as suggested by Flowerdew (e.g., a dished recess or other shaped surface feature, a directional logo/marker, or both) so that the primary and secondary coils would be more readily ‘optimized’ for alignment and the inductive ‘coupling is maximized.’”). Flowerdew teaches, for example, that, with the use of a dished charging surface, the secondary unit “tends to align in one axis” and “[t]his alignment is such that the coupling between a solenoid receive coil in secondary unit 304 and the charging coils of charger 302 is maximized.” Ex. 1005, 11:25–52. Petitioner, with the supporting testimony of Dr. Woods, contends, and we agree, that a person of ordinary skill in the art “would have been sufficiently skilled to implement [the proposed] combination given the predictable techniques disclosed in each reference and the relatively advanced state of the art at the time.” Id. at 17 (citing Ex. 1003 ¶ 55). We determine that Petitioner has shown that the proposed combination teaches or suggests the subject matter of limitation 1.3 and that Petitioner has set forth adequate and persuasive reasons with rational underpinning as to why a person of ordinary skill in the art would have modified Onishi’s system to utilize an alignment mechanism. We also determine, for the reasons stated by Petitioner, that a person of ordinary skill in the art would have had a reasonable expectation of success in making the proposed combination. See Pet. 16–17; Ex. 1003 ¶ 55.” slip op. at 23
Patent outcomesUS 9,048,696 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,048,696 - Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Ouraring, Inc.All claims unpatentablePTAB · Dec 2, 2025 · IPR2024-00928 · APJ Neil T Powell · IPR · Final written decision
Claims 1–5, 11–13, and 16–18 are unpatentable as obvious over Schröder and Yuen, LeBoeuf, or LeBoeuf and Wissmar; Schröder alone did not render its challenged claims unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedOther
“Patent Owner agrees with Petitioner’s proposed definition of a person of ordinary skill in the art. PO Resp. 14. We adopt this uncontested definition of the level of ordinary skill in the art. This definition is supported by the record and consistent with the disclosure in the ’034 patent and the references cited in the Petition.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“Petitioner has the better position, as we agree with Petitioner that the ’034 patent discloses an embodiment that uses transparent potting as a window, rather than to form the overall form factor and encapsulate components: [Figure] 16C is a perspective view of the WCD with potting material 1630. As described above, the PCB, battery, and components can be disposed within the space. Once disposed therein, a potting 1630 can be provided atop the components and within the cutaway portion 1616. The potting 1630 can be transparent to allow for transmission of light through the cutaway portions 1616. Ex. 1001, 20:51–57. This configuration is shown below in Figure 16C. “[Figure] 16C is a perspective view of the WCD with potting material.” Ex. 1001, 6:1–2. As Figure 16C shows, potting material 1616 forms a window in only a portion of the WCD’s exterior. can be used to encapsulate components and form the overall form factor in some embodiments. E.g., Ex. 1001, 17:4–8, 18:61–62. But Patent Owner does not persuade us that claim 12 is limited to those embodiments. PO Resp. 29; SuperGuide Corp. v. DirecTV Enters., Inc., 358 F.3d 870, 875 (Fed. Cir. 2004) (“Though understanding the claim language may be aided by the explanations contained in the written description, it is important not to import into a claim limitations that are not part of the claim.”). Accordingly, we do not construe claim 12’s “external transparent potting” as requiring material that “forms the ‘overall form factor of the WCD 120, in addition to providing a housing for one or more electronic components,’” as suggested by Patent Owner. PO Resp. 29. Nor do we construe the claim language as requiring material that “also fills the space and encapsulates the components,” as suggested by Patent Owner. Id.” slip op. at 11
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“We are not persuaded by Petitioner’s arguments and find that Patent Owner has the better position. Although Schröder describes some aspects that are similar to those of a printed circuit board, Petitioner has not sufficiently demonstrated that a person having ordinary skill in the art would understand Schröder’s inlay 12 or carrier foil to be a “printed circuit board,” as recited in independent claims 1, 11, and 16. As an initial matter, while Schröder refers to a “circuit board” in another context, it never refers to the carrier foil or inlay in its finger-ring embodiment as such. See Ex. 1007, 22:48–49; see also Ex. 1079 ¶ 21 (Dr. Anthony acknowledging that Schröder’s only reference to a “circuit board” is “unrelated to Schröder’s finger-ring teachings”). Instead, Schröder describes features of that inlay, explaining that “[t]he carrier foil itself consists of a flexible plastic material, e.g.[,] PET or Kapton” and “antenna coil 8 can for example be printed on the carrier foil by means of a conductive paste” and “a depression is manufactured in the carrier foil, e.g.[,] by milling, lasering, etching, before the chip module 10, the antenna coil 8 and optional further electronic devices are inserted into the depression.” Ex. 1007, 13:26–31, 13:35–37. Schröder further describes that “[a]t least one further foil can be applied to the carrier foil or the ring blank on at least one side” to produce a “multilayer foil composite” that can be “interconnected” by means of “glue” slip op. at 23
- Expert testimonyPetitioner expert discountedOther
“show that Schröder’s inlay 12 is a PCB. Relying on testimony from Dr. Anthony, Petitioner asserts that Schröder’s inlay 12 serves as a flexible carrier made of materials “commonly understood to be printed circuit board materials” such as PET and Kapton. Pet. 23 (citing Ex. 1002 ¶ 172; Ex. 1006, 12:28–29). Dr. Anthony did not provide a clear explanation of a person of ordinary skill in the art’s understanding of a PCB in his direct testimony. article describing a PCB as a “laminated sandwich structure of conductive and insulating layers” was an accurate description of a PCB: Q. So is the first sentence of this Wiki page, in your mind, an accurate description of a printed circuit board? A. So, the first sentence, “A printed circuit board (PCB)[] also called [a] printed wiring board, []is a laminated sandwich structure of conductive and insulating layers, each with a pattern of traces, planes, and other features (similar to wires on a flat surface) etched from one or more sheets of copper laminated onto or between sheet layers of nonconductive substrate.” And so your question again was? Q. Is that a fair definition of printed circuit board in your mind? A. It’s a fair description of the general process for circuit boards, layers of conductive traces.” slip op. at 21
Patent outcomesUS 9,582,034 unpatentableClaim construction§ 103 obviousnessPatents in suitUS 9,582,034 - Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Ouraring, Inc.Some claims unpatentablePTAB · Nov 25, 2025 · PGR2024-00030 · APJ Linda E Horner · PGR · Final written decision
Claims 17 and 18 are unpatentable under §112(d) for improper dependent form; claims 1–10 and 12–16 were not shown unpatentable on the asserted obviousness grounds.
RulingsFinal written decision- Expert testimonyPetitioner expert discountedPatent owner expert creditedDecided for patent owner
“We do not credit Dr. Anthony’s testimony, which is based on the arbitrary shading in Figure 7 (see Ex. 1002 ¶ 174), that Schröder teaches or suggests limitation 1[d] because it (1) is inconsistent with Petitioner’s reasoning for limitation 1[c], and (2) it is based on an admitted misreading of the embodiment of Schröder’s Figure 5 (see Ex. 1002 ¶ 175). As to the first item, Dr. Anthony states that “a POSITA would have been motivated to place a battery in a part of the cavity that is far from a PCB holding other electrical components because that configuration allows for better thermal management.” Ex. 1002, para. 175. The problem with this statement is that Petitioner relies on Schröder’s teaching that inlay 12, i.e., the alleged PCB, could include “other electrical components,” such as a battery to support its position that Schröder suggests placing a battery between the ring halves. See, e.g., Pet. Reply 2 (pointing to Dr. Mercier’s depo testimony that inlay 12 with “other components” is inserted between ring halves); id. at 3 (relying on Schröder’s teaching about placing components in depressions on inlay 12). So, Petitioner earlier asserts for the battery limitation 1[c] that Schröder teaches or suggests putting a battery on inlay 12 inside the ring halves, but then for limitation 1[d], Dr. Anthony testifies that a POSITA would place the battery “far” away from the inlay 12 (i.e., the alleged PCB). These positions are inconsistent.” slip op. at 25
- Skill levelSkill level board ownOther
“at least a four-year degree in electrical engineering, mechanical engineering, biomedical engineering, optical engineering, or related field of study, or equivalent experience, and at least two years’ experience in academia or industry studying or developing physiological monitoring devices such as non-invasive biosensors. Pet. 8 (citing Ex. 1002 ¶¶ 18–22). Petitioner also contends that a person of ordinary skill would have been “familiar with, for example, sensor system design and signal processing” and that “[a] higher level of education or skill might make up for less experience, and vice versa.” Id. Patent Owner agrees with Petitioner’s proposed definition of a person of ordinary skill in the art. Resp. 26. We adopt this uncontested definition of the level of ordinary skill in the art. This definition is supported by the record and consistent with the disclosure in the ’178 patent and the references cited in the Petition.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Patent Owner indicates that in the related ITC proceeding involving the ’178 patent, the Administrative Law Judge (ALJ) adopted three constructions agreed-upon by the parties in that proceeding8 and also construed two disputed terms.9 Resp. 26–27 (citing Ex. 2016, 5, 6, 14). Patent Owner agrees with Petitioner, however, that no terms need to be construed to decide the issues raised in the Petition. Id. at 27. We reviewed the constructions adopted by the ITC. Ex. 2016, 5, 6, 14. 8 In the ITC proceeding, the ALJ adopted the parties’ agreed-upon constructions that: (1) the preamble of claim 1 [a finger-worn wearable ring device] is limiting; (2) [positioned/configured to fit] within a “cavity” is [positioned/configured to fit] within a “hollow space”; and (3) [the internal housing component] “coupled with” [the external housing component] is [the internal housing component] “connected with” [the external housing component]. Ex. 2016, 5. 9 In the ITC proceeding, the ALJ construed the claims such that: (1) the internal and external housing components of claims 1, 12, and 17 enclose space and do not necessarily exclude potting material; and (2) “circumferential,” as recited in claims 1, 17, and 18, does not require a closed shape. Ex. 2016, 14, 17. These constructions are not germane to the issues we need to decide to resolve this proceeding. Thus, we agree that no explicit claim construction is necessary for this decision. To the extent the parties’ arguments raise any implicit issues of claim construction, we address those issues within the context in which they are raised in our analysis below.” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable
“The record supports Patent Owner’s argument that Mestas’s batteries are much too large to fit within a ring form factor, and “Mestas’s batteries, layout, and other components . . . would have to be scaled down 5 to 10 times to be appropriately sized for a finger worn ring.” Resp. 64 (internal quotation marks omitted) (citing Dr. Anthony’s cross-examination testimony at Ex. 2021, 313:12). Moreover, we do not credit Dr. Anthony’s testimony that miniaturization of the battery would have been “trivial to implement.” Ex. 1002 ¶ 242. Dr. Anthony admitted on cross-examination that it would not have been within the level of skill of a person having ordinary skill in the art to design a smaller version of Mestas’s battery, and that such a person would need to procure a battery of the appropriate size and specifications for implementation in a finger-ring from a battery manufacturer. Ex. 2021, 315:9–318:9. Yet Dr. Anthony had not ascertained, for purposes of his testimony, whether there was a battery available in 2013 that was appropriate to fit within the inlay space of the modified version of Schröder’s finger-ring that he and Petitioner allege would have been obvious to one of skill in the art at that time. Id. at 321:5–10. Further, we credit Dr. Mercier’s testimony that Dr. Anthony’s testimony fails to consider the differences in power requirements between Mestas and Schröder or to account for the constraints of such a substantially smaller form factor in Schröder’s finger-ring as compared to Mestas’s wrist device. Ex. 2018 ¶¶ 159–160. Although large curved batteries suitable for use in a wrist band or other larger wearable device, such as shown in Mestas, were known at the time of the ’178 patent, we also have evidence that prior art “finger ring wearables up to the ’178 patent had used ‘coin’ type batteries.” Id. at 66 (citing Ex. 2018 ¶ 161). We credit Dr. Mercier’s testimony that a person having ordinary skill in the art would look to a coin type battery for the necessary power requirements of Schröder’s device. Ex. 2018 ¶ 161. Indeed, this testimony is consistent with the other art of record that consistently shows the use of flat batteries in finger-ring devices, often stacked above and protruding from the general ring shape of the device. See, e.g., Ex. 1005 (Niwa), Figs. 22, 28; Ex. 2025 (Asada ’701 patent), Fig. 4; Ex. 1035 (Rhee), Figs. 7-1, 8-1, 8-2; Ex. 1037 (Asada article), Fig. 9; Ex. 1034 (Asada ’199 patent), Fig. 2; Ex. 1028 (Kimura), Fig. 24; Ex. 2018 ¶¶ 61–70. In fact, Oura’s first-generation ring design, released in 2015, used a Superbowl ring-type design, with the battery and other components mounted on top of the ring. Ex. 2034; Ex. 2018 ¶ 71. Based on these findings, Petitioner has not met its burden to show by a preponderance of the evidence that a person having ordinary skill in the art would have been led to modify Schröder’s finger-ring to place a curved battery between the internal and external housing components in light of the teachings in Mestas. Thus, Petitioner has not met its burden to show by a preponderance of the evidence that dependent claim 3 of the ’178 patent is unpatentable over Schröder and Mestas.” slip op. at 38
Patent outcomesUS 11,868,178 mixedClaim construction§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 11,868,178 - PTAB · Nov 21, 2025 · IPR2025-01055 · APJ Stephen E Belisle · IPR · Institution
The Board denied institution because the Petition did not show a reasonable likelihood that claims 1–18 were unpatentable as obvious over the asserted combinations.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“review. 35 U.S.C. § 314(b) (2024); 37 C.F.R. § 42.4(a) (2024). We may not institute an inter partes review “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). The “reasonable likelihood” standard is “a higher standard than mere notice pleading” but “lower than the ‘preponderance’ standard to prevail in a final written decision.” Hulu, LLC v. Sound View Innovations, LLC, IPR2018-01039, Paper 29 at 13 (PTAB Dec. 20, 2019) (precedential). When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim. 37 C.F.R. § 42.108(a). Applying those standards, and based on the record before us, we determine that Petitioner has not demonstrated a reasonable likelihood of success in proving that any one of the Challenged Claims is unpatentable. See 35 U.S.C. § 314; 37 C.F.R. § 42.4(a). Accordingly, we deny institution of an inter partes review of the ’326 patent.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“In determining the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (citation omitted). The level of ordinary skill in the art also may be reflected by the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). Neither party argues that the outcome of this case would differ based on our adoption of any particular definition of the level of ordinary skill in the art. Considering the subject matter of the ’326 patent, the background technical field, the prior art, and Petitioner’s unopposed definition of the skilled artisan, which is supported with testimony of Dr. Easttom (Ex. 1004 ¶ 22–23), we apply the level of skill set forth above.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner
“Claim 1 explicitly recites “partially,” not “fully” or “completely.” On its face, “partially” appears to have its plain and ordinary meaning, i.e., not completely. The use of “partially” in the subject limitation shows or at least strongly suggests that the claimed invention contemplates at least some frequency gap to remain between the first channel and the second channel. In addition, as argued persuasively by Patent Owner, this interpretation is further supported by claim 1’s requirement of “transmitting data subcarriers occupying the first channel, the second channel, and the frequency gap in parallel to a receiver”: [T]he “transmitting” step in claim 1 requires that the frequency gap be included in the transmitted signal. Inclusion of the frequency gap in the transmitted signal necessarily requires that the frequency gap be only partially filled -- but not fully filled -- with added data subcarriers at the time of transmission, because if the frequency gap were fully filled it would no longer exist at the time of signal transmission. Prelim. Resp. 23. Petitioner offers no explanation for how the language of claim 1 itself would allow for “partially” to encompass “completely.”” slip op. at 15
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“For all but one sentence of Petitioner’s arguments for how each of the subject combinations allegedly would have taught the Partially Filling Limitation as variously recited in claims 1, 16, and 18, Petitioner relies (implicitly) on a construction of “partially” that allows for completely filling the frequency gap between the first channel and the second channel, and alleges that the asserted combinations teach completely filling such gap. See Pet. 26–28 (Gardner and Mori), 64–67 (Mori, Lu, and Williams); Prelim. Resp. 25–29, 38–40 (Patent Owner agreeing that the asserted combinations teach only completely or fully filling the frequency gap.). We reject such a construction of “partially” as discussed above in Section III.C.2, and thus find Petitioner’s arguments unpersuasive.” slip op. at 18
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,027,326 - PTAB · Nov 21, 2025 · IPR2025-00931 · APJ Georgianna W Braden · IPR · Institution
The Board denied institution on claims 1–27 because the Petition did not show a reasonable likelihood that any challenged claim would be unpatentable over the asserted obviousness combinations.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“review. 35 U.S.C. § 314(b) (2024); 37 C.F.R. § 42.4(a) (2024). We may not institute an inter partes review “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). The “reasonable likelihood” standard is “a higher standard than mere notice pleading” but “lower than the ‘preponderance’ standard to prevail in a final written decision.” Hulu, LLC v. Sound View Innovations, LLC, IPR2018-01039, Paper 29 at 13 (PTAB Dec. 20, 2019) (precedential). When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim. 37 C.F.R. § 42.108(a). Applying those standards, and based on the record before us, we determine Petitioner has not demonstrated a reasonable likelihood of success in proving that any one of the Challenged Claims is unpatentable. See 35 U.S.C. § 314; 37 C.F.R. § 42.4(a). Accordingly, we deny institution of an inter partes review of the ’844 patent.” slip op. at 2
- Skill levelSkill level petitioner adoptedOther
“critical time. See generally Prelim. Resp. Patent Owner’s Declarant, Dr. Newman, states that for his analysis he uses the definition provided by Dr. Zadok. Ex. 2014 ¶ 13. We discern no meaningful difference between the definitions proffered by Petitioner or its Declarant. Neither party argues that the outcome of this case would differ based on our adoption of any particular definition of the level of ordinary skill in the art. Considering the subject matter of the ’844 patent, the background technical field, the prior art, and Dr. Zadok’s unopposed definition of the ordinarily skilled artisan (Ex. 1003 ¶ 35), which is adopted by Dr. Newman (Ex. 2014 ¶ 13) and is consistent with the asserted prior art references, we apply the level of skill set forth by Dr. Zadok.” slip op. at 13
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Only those claim terms that are in controversy need to be construed, and only to the extent necessary to resolve the controversy. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (stating that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). Petitioner contends “that the challenged claims are obvious under any reasonable interpretation under the Phillips standard, and thus Petitioners submit that the Board need not resolve any express constructions.” Pet. 11 Patent Owner asserts “the Board should resolve this IPR under the plain-and ordinary-meaning standard without adopting any special constructions beyond what is necessary to address a concrete dispute.” Prelim. Resp. 11. Based on our review of the current record, we agree with parties that no express construction of any term is necessary to resolve this case.” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“We agree with Patent Owner that Petitioner fails to offer sufficient explanation as to why a person of ordinary skill in the art would have combined the teachings of Sapuntzakis and Holzmann. Rather, Petitioner appears to argue that, based on the advantages described by Holzmann (Ex. 1007 ¶ 33), and using well-known techniques with unspecified predictable results, a person of ordinary skill in the art would have had sufficient reason to combine these disparate elements taught in the prior art references to render the challenged claims obvious. Pet. 23–24, 33. Yet, other than Petitioner’s cursory assertion of advantageously incorporating the memory module from Holzmann to provide a caching mechanism (Pet. 33), which cites equally cursory and unsupported testimony by Dr. Zadok (Ex. 1003 ¶¶ 329, 333, 336–355), Petitioner fails to identify what particular advantages or efficiencies would have prompted a person of ordinary skill in the art to combine Holzmann’s memory module with Sapuntzakis’s system.” slip op. at 29
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,332,844 - PTAB · Nov 18, 2025 · IPR2025-00782 · APJ Ken B Barrett · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that any challenged claim was unpatentable over the asserted grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“An inter partes review may not be instituted “unless . . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Having considered the arguments and evidence presented by Petitioner and Patent Owner, we determine that Petitioner has not demonstrated a reasonable likelihood of prevailing on at least one of the challenged claims of the ’469 patent. Accordingly, we do not institute an inter partes review of the challenged claims.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that: [A] POSITA would have had at least a bachelor’s degree in computer science, computer engineering, business information systems, software engineering, or systems engineering and at least two years of experience in computer networking or telecommunications. Ex.1002 ¶21; see also Ex.1001 (1:14-31). Additional education could substitute for professional experience. Ex.1002 ¶21. Significant work experience could substitute for formal education. Ex.1002 ¶21. Pet. 7–8. Patent Owner, at this stage, does not disagree or propose a different definition of the person of ordinary skill in the art. Petitioner’s definition is consistent with the level of ordinary skill reflected in the prior art references of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (recognizing that the prior art itself may reflect an appropriate level of skill in the art). For purposes of this decision, we apply Petitioner’s definition of the person of ordinary skill in the art.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner states that it “do[es] not believe explicit construction is required to resolve this Petition.” Pet. 7. Patent Owner proposes constructions for “Internet,” “access the Internet,” “subscriber access website.” Prelim. Resp. 12–15. On this record and for purposes of this decision, we determine that no claim terms require express construction. D. Alleged Anticipation of Claims 1, 2, 10, 11, and 24–28 by Bruner and” slip op. at 10
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentable
“We find Patent Owner’s argument to be persuasive. Petitioner does not explain adequately how Bruner discloses the positional requirement of a subscriber access unit being coupled between the satellite dish and the router. Accordingly, Petitioner has not shown sufficiently for purposes of institution that Bruner anticipates independent claim 24. Although, for the obviousness challenge, Petitioner contends that Clark discloses a wireless router (for limitation 24c), Petitioner relies solely on Bruner for the “between” limitation. See Pet. 17 (“Bruner and/or Bruner in view of Clark both disclose each limitation of claim 24c, including a router (e.g., Bruner’s ‘ADS’ and Clark’s ‘wireless router’)”); id. at 18–19 (the discussion of the “between” limitation 24d asserting that “Bruner discloses claim 24d,” with no mention of Clark). Furthermore, Petitioner merely asserts that both Bruner and Clark disclose a router. See id. at 17–18. Petitioner, however, does not indicate clearly which is used in the proposed combination, does not describe the configuration of a proposed combination or a proposed modification of Bruner’s system, and fails to set forth an adequate and persuasive reason with rational underpinning as to why a person of ordinary skill in the art would have modified Bruner’s system to arrive at the positional requirement of the subscription access unit being coupled between the satellite dish and a router. See id. at 13–14 (motivation section for this ground); id. at 18–19 (addressing the “between” limitation 24d). Accordingly, Petitioner has not shown a reasonable likelihood of prevailing on its challenge to independent claim 24 as obvious over Bruner in view of Clark.” slip op. at 14
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,324,469
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.