- Amperex Technology Ltd. v. Semiconductor Energy Laboratory Co., Ltd.Institution deniedPTAB · Dec 5, 2023 · IPR2023-01016 · APJ Christopher M Kaiser · IPR · Institution
Institution was denied because the petition did not show a reasonable likelihood that claims 1–8 were unpatentable over the asserted Shim- or Fujiki-based grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Because Petitioner relies on Shim and Fey to show that a person of ordinary skill in the art would have understood that fluorine would be present in a crack portion of the Shim or Shim/Lee particle, because the requirement for fluorine to be present in a crack portion appears in all the challenged claims, and because Petitioner does not show sufficiently that Shim and Fey would have suggested the presence of fluorine in a crack portion, we determine that Petitioner has not shown a reasonable likelihood of prevailing with respect to any claim challenged on the basis of Shim.” slip op. at 17
- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner asserts that a person of ordinary skill in the art “would have had at least a bachelor’s degree in chemistry, chemical engineering, or materials science and at least five years of experience in the field of batteries and battery materials.” Pet. 33. According to Petitioner, “[i]ndividuals with different education and additional experience could still be of ordinary skill in the art if that additional experience compensates for a deficit in their education and experience.” Id. (citing Ex. 1003 ¶¶ 83–91). On the present record, Patent Owner does not contest Petitioner’s definition of a person of ordinary skill in the art. Prelim. Resp. 19–20. In light of the record before us, and for purposes of this Decision, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’828 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand and implement the teachings of the ’828 patent and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown”) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)).” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“As explained more fully below, we need not construe any claim terms to determine that Petitioner fails to show sufficiently that the prior art teaches or suggests the subject matter of the challenged claims. Thus, after considering the arguments and information presented in the Petition and Preliminary Response, we determine that we do not need to construe any terms expressly for purposes of this Decision. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 8
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached
“Because Petitioner relies on Shim and Fey to show that a person of ordinary skill in the art would have understood that fluorine would be present in a crack portion of the Shim or Shim/Lee particle, because the requirement for fluorine to be present in a crack portion appears in all the challenged claims, and because Petitioner does not show sufficiently that Shim and Fey would have suggested the presence of fluorine in a crack portion, we determine that Petitioner has not shown a reasonable likelihood of prevailing with respect to any claim challenged on the basis of Shim.” slip op. at 17
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,741,828 - PTAB · Nov 17, 2023 · IPR2023-00900 · APJ Jon B Tornquist · IPR · Institution
Instituted IPR on claims 13–17 on all petitioned grounds after finding a reasonable likelihood of prevailing on at least one obviousness challenge.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2023). The standard for institution is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons set forth below, Petitioner demonstrates a reasonable likelihood of prevailing with respect to claims 13–17 of the ’702 patent. Accordingly, we institute an inter partes review.” slip op. at 2
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for petitioner
“On this preliminary record, we agree with Petitioner that the intrinsic record does not support a construction of “stackable add-on layer” that encompasses formation of memory cells by sequential deposition on a plain language of the claim does not require merely a “layer” having a plurality of vertically oriented semiconductor memory cells, but rather “a stackable add-on layer” having a plurality of vertically oriented semiconductor memory cells that is bonded to the dielectric layer. Ex. 1001, 12:29–32. The written description of the ’702 patent strongly suggests that such “a stackable add-on layer” is formed separately from the substrate and then stacked on and bonded to the substrate. Id. at 1:47–50 (“Briefly, a plurality of vertically oriented semiconductor memory devices, or cells, may be added to a separately fabricated substrate that includes electrical devices and/or interconnect lines.” (emphasis added)). It is unclear how memory cells sequentially deposited on a substrate could be considered to be a plurality of memory devices “added to a separately fabricated substrate.”” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“Petitioner contends one of ordinary skill in the art would have combined Watanabe and Lee because Watanabe discloses an alternate method of forming a memory device that is applicable to the memory devices of Lee and Watanabe, and Watanabe discloses that its “stacking method” improves the accuracy of the wiring and provides “a semiconductor memory device with improved integration density” and “low interconnection wire resistance.” Id. at 72.” slip op. at 24
- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“3. Factor 3 – Investment in the parallel proceeding by the court and the parties Under the third Fintiv factor, we consider the “investment in the parallel proceeding by the court and the parties.” Fintiv, Paper 11 at 6. Petitioner contends that, at the time of the filing of the Petition, the court had not yet held a case management conference or set a Markman or trial date, and that no hearings or substantive activities or hearings have occurred in the case. Pet. 75. “Because the investment in the trial has been minimal and Petitioner acted diligently” in filing the Petition, Petitioner contends “this factor weighs strongly against discretionary denial.” Id. Patent Owner contends the co-pending district court case has been moving forward, with infringement and invalidity contentions being exchanged and discovery and deposition underway. Prelim. Resp. 34. Patent Owner further contends that by the institution deadline of November 28, 2023, the parties will be in the “home stretch of discovery.” Id. at 34– 35. “Based on the considerable resources already expended on contentions and discovery in the district court,” Patent Owner argues that Fintiv factor 3 weighs in favor of denying institution. Id. at 35. directed to no substantive rulings by the district court to suggest that it has invested considerable resources in the case. Nor are we presented with evidence that the parties have expended significant resources in the district court litigation. Fact discovery is not scheduled to be completed until July 1, 2024, and expert discovery is to be completed by August 5, 2024, i.e., more than seven months after the institution deadline. Ex. 2001, 3. Accordingly, we determine that Fintiv factor 3 weighs against discretionary denial of institution. 4. Factor 4 – Overlap between issues raised in the petition and in the parallel proceeding Under the fourth Fintiv factor, we consider the “overlap between issues raised in the petition and in the parallel proceeding.” Fintiv, Paper 11 at 6. Petitioner contends that in the district court litigation Patent Owner asserts infringement under only claim 13, whereas the Petition challenges claims 13–17. Pet. 76. Petitioner argues that because it is challenging more claims than are asserted in the district court litigation, this proceeding “is the only venue in which the invalidity challenges against several claims in the ’702 Patent will be adjudicated,” and this proceeding will promote efficiency because it “will resolve disputes against future district court defendants.” Id. Patent Owner responds that Petitioner’s “invalidity contentions challenge the same Claims 13–16 based on the identical Watanabe, Lee, and Endoh references relied upon in the Petition.” Prelim. Resp. 35. Petitioner responds that it has signed and served a stipulation “not to pursue in the parallel district court proceeding any obviousness ground that includes the primary references in the Petition.” Prelim. Reply 2. According to Petitioner, “[t]his stipulation mitigates concerns of potentially the PTAB.” Id. Patent Owner argues in response that Petitioner’s “meager agreement” slip op. at 30
Claim construction§ 103 obviousnessDiscretionary denialPatents in suitUS 7,378,702 - PTAB · Aug 30, 2023 · IPR2023-00521 · APJ Jon B Tornquist · IPR · Institution
The Board instituted IPR on claims 19–61 and 63–81 on all petitioned grounds, finding a reasonable likelihood that Doud anticipates claims 19–61 and 63–75.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2022). The standard for institution is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons set forth below, we determine that Petitioner demonstrates a reasonable likelihood of prevailing with respect to at least one claim of the ’740 patent. Accordingly, we grant institution of an inter partes review.” slip op. at 2
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateOther
“the application describe the claim limitations exactly,” the application must demonstrate to persons of ordinary skill in the art that the applicants invented a composition including those limitations. Wertheim, 541 F.2d at 262. On its face, the range of “at least 0.01 wt. %” encompasses a range that is broader than 0.01–35 wt. %, and Patent Owner does not sufficiently explain why a person of ordinary skill in the art would understand from merely a disclosure of 35 wt.% that the inventors were in possession of the entire claimed range for copper, cobalt, or nickel in the magnesium composition.” slip op. at 11
- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date, deniedOther
“On this record, the term “at least 0.01 wt. %” in the ’740 patent encompasses values for nickel, copper, and cobalt that are higher than the 35 wt. % (nickel and copper) and 20 wt. % (cobalt) limits outlined in the parent and grandparent applications. Accordingly, we determine that there is a reasonable likelihood that claim 19 of the ’740 patent is not entitled to the benefit of the filing dates of its priority applications. Challenged claims 20–61 and 63–75 depend from claim 19 and there is no argument presented that these claims have independent written description support in Doud. For example, there is no evidence presented that any of these dependent claims narrow the ranges for each of copper, nickel, and cobalt recited in in the ’295 application for these claims.7 Accordingly, for purposes of this Decision, we apply Doud as prior art to challenged claims 19–61 and 63–75.” slip op. at 12
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“as the ’740 patent. For example, Doud and the ’740 patent both disclose a method of forming a novel magnesium composite that includes melting an AZ91D magnesium alloy containing 90 wt. % magnesium, 9 wt. % aluminum, and 1 wt. % zinc. Ex. 1005 ¶¶ 45, 47; Ex. 1001, 21:43–51, 22:48–53, 33:32–43, 34:9–12. To this alloy is added either 7 wt. % nickel or 10 wt. % copper. Ex. 1005 ¶¶ 45, 47, 53, 57; Ex. 1001, 21:48–51, 22:53–56, 33:35–36, 34:12–13. These additives are mixed in the magnesium alloy at a temperature that is less than the melting point of copper or nickel, and the casting is then cooled. Ex. 1005 ¶¶ 45, 47, 53, 57; Ex. 1001, 21:51–54, 22:56–58, 33:35, 34:12-13. Doud reports that nickel and copper, when added to molten magnesium, will form Mg2Ni and CuMg2 intermetallic, galvanically-active, in situ precipitates. Ex. 1005 ¶¶ 12–13. Doud discloses that the dissolution rate of the resulting casting material is either 325 mg/cm2-hr (nickel) or 50 mg/cm2-hr (copper) in a 3% KCl solution at 90° C. Ex. 1005 ¶¶ 45, 47, 53, 57; Ex. 1001, 21:60–62, 22:61–63, 33:41–43, 34:15–17. Doud also discloses that the average particle diameter of the additives used in the invention is generally “at least about 0.1 microns” and “typically no more than about 500 microns.” Ex. 1005 ¶ 6. Petitioner explains how the identified disclosures of Doud anticipate independent claim 19. Pet. 39–40. Petitioner also identifies where the limitations of dependent claims 20–61 and 63–75 are disclosed in Doud. Id. at 41–45. Patent Owner does not address Petitioner’s anticipation arguments with respect to claims 19–61 and 63–75, apart from arguing that Doud is not prior art to these claims. Prelim. Resp. 27–39. demonstrates a reasonable likelihood that claims 19–61 and 63–75 are anticipated by Doud.” slip op. at 16
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosureDiscretionary denialPatents in suitUS 10,689,740 - Samsung Electronics Co., Ltd. v. Lynk Labs, Inc.All claims unpatentablePTAB · Jun 7, 2023 · IPR2022-00100 · APJ Scott Raevsky · IPR · Final written decision
Claims 8–10 and 15–18 are unpatentable as obvious over Piepgras, Michael, and Butler, with Schultz or Naskali added for claims 16 and 17.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“Petitioner contends that there is “no meaningful dispute over [the definition of] a POSITA.” Reply 1. We agree. However, we adopt Patent Owner’s definition of the level of skill because we are persuaded that it is more consistent with the problems and solutions in the ’583 patent. In particular, Patent Owner’s definition requires experience with LED devices, whereas Petitioner’s definition makes LED experience optional (“experience with LED devices and/or related circuit design”). We note that the outcome of this decision would not have changed had we adopted Petitioner’s definition.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“The parties propose no constructions. Pet. 7; PO Resp 8–9; Reply 1. At institution, we discussed the meaning of the term “array.” Dec. 16 n.12. Patent Owner traverses this construction and submits that “no special construction for ‘LED array’ is needed,” as it does not dispute any limitation reciting an “LED circuit array.” See PO Resp. 9. We agree. Based on our review of the record, no terms need to be construed. See Realtime Data, LLC v. Iancu, 912 F.3d 1368 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 8
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“fails to identify any deficiencies or drawbacks of Piepgras’s two-button remote control because the law does not require Petitioner to identify problems with a reference in order to establish obviousness. See PO Resp. 28–30; In re Heck, 699 F.2d 1331, 1333 (Fed. Cir. 1983) (“The use of patents as references is not limited to what the patentees describe as their own inventions or to the problems with which they are concerned. They are part of the literature of the art, relevant for all they contain.”). What the Petition must demonstrate is that there was some reason why one of ordinary skill in the art would have sought to combine the elements of the prior art in the manner proposed. KSR, 550 U.S. at 418. The Petition provides multiple, persuasive reasons (discussed above) as to why one of ordinary skill in the art would have sought to use a touch screen, as disclosed in Butler, to permit user control of a remote control, as disclosed in Piepgras.” slip op. at 21
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“Petitioner argues, and we agree, that the Piepgras-Michael-Butler combination discloses that the portable telecommunications device can detect a human touch. Pet. 43. Further, Dr. Baker testifies, and we agree, that a POSITA would have understood that the modified device “would use an LED touch display and thus when touched, the LED(s) of the display would change (e.g., turning on and/or changing interface content).” Ex. 1002 ¶ 141. We credit this testimony by Dr. Baker because it is well-supported by evidence. See, e.g., Exs. 1009 (Hack), 1022 (Gillespie); Pet. 43 (citing same).13 Patent Owner does not offer any contrary evidence that would undermine Dr. Baker’s persuasive testimony that a POSITA would have understood that the modified device would use an LED touch display and that when touched, the LED(s) of the display would change (and thus provide light). See Ex. 2001 ¶¶ 105–16 (attacking the sufficiency of Petitioner’s evidence but not disputing Dr. Baker’s core assertion regarding the understanding of a POSITA). It is somewhat ironic that Patent Owner asserts that Dr. Baker’s testimony is “conclusory and not tied to supporting evidence.” Sur-reply 26 (citing Ex. 1002 ¶ 141). In reality, Petitioner supplies ample supporting evidence (e.g., Hack and Gillespie), but Patent Owner denies that we can consider it. See, e.g., Pet. 43 (citing, e.g., Exs. 1009, 1022); PO Resp. 44. Petitioner’s reliance on evidence to show the understanding of a skilled artisan is appropriate because “the obviousness ‘analysis requires an assessment of the . . . background knowledge possessed by a person having ordinary skill in the art.’” Koninklijke Philips, 948 F.3d at 1337. Petitioner does not rely upon references such as Hack and Gillespie to supply a missing claim limitation.14 Rather, Petitioner relies on Butler’s disclosure of a touch screen for this limitation and points to Hack and Gillespie to show that prior art touch screens often included LED displays and that one of ordinary skill in the art would have understood that a touch screen would have provided 13 As we explain below, we need not rely on Swartz. 14 For this reason, Petitioner need not have included Swartz, Hack, or Gillespie in its ground listing, and Petitioner need not show a motivation to combine Swartz, Hack, or Gillespie with Piepgras, Michael, and Butler. light based upon detection of human touch. Reply 20; see also Pet. 43. Arendi is therefore inapposite because Petitioner’s detailed explanations and supporting evidence are the opposite of relying on “common sense” as a “wholesale substitute for reasoned analysis and evidentiary support.” See 832 F.3d at 1362.” slip op. at 33
Patent outcomesUS 10,750,583 unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,750,583 - PTAB · May 22, 2023 · IPR2022-01541 · APJ Jon B Tornquist · IPR · Institution
The Board instituted IPR on claims 1–7, 9, 10, 20–22, and 24 on all asserted grounds, finding a reasonable likelihood that at least one challenged claim would have been obvious.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2022). The standard for institution is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons set forth below, Petitioner demonstrates a reasonable likelihood of prevailing with respect to claims 1–7, 9, 10, 20–22, and 24 of the ’951 patent. Accordingly, we institute an inter partes review with respect to all grounds asserted in the Petition. See SAS Inst. Inc. v. Iancu, 138 S.Ct. 1348, 1355 (2018).” slip op. at 2
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b).” 37 C.F.R. § 42.100(b). Under that standard, the words of a claim are generally given their “ordinary and customary meaning,” which is the meaning the term would have had to a person of ordinary skill at the time of the invention, in the context of the entire patent including the specification. Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc). Neither party asserts that any claim terms of the ’951 patent require construction. See Pet. 7; Prelim. Resp. 18–19. And, upon review of the parties’ arguments and supporting evidence, we find that no terms require construction for purposes of this Decision. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 6
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
- Expert testimonyPetitioner expert creditedDecided for petitioner
“arrangement,” allowing for an increased density of dots to be formed on the recording paper. Ex. 1007 ¶¶ 10–12, 17. One aspect of the “ink ejection parts” is the row of nozzles 22. Id. ¶¶ 17–18, 43, Fig. 1. In light of these disclosures, Mr. Curley testifies that one of ordinary skill in the art would have understood that the nozzles of Hamafuku are arranged in a row at “high density,” which was considered to be 600 dpi or higher in the relevant time period. Ex. 1002 ¶¶ 321–323. We find this testimony sufficient to present, at a minimum, a material issue of fact as to whether Hamafuku teaches or suggests nozzles that are spaced apart with a pitch ranging from about 600 to about 2400 dpi, as recited in claim 1. declaration are not persuasive. The Petition clearly details why Petitioner contends one of ordinary skill in the art would have understood Hamafuku to teach or suggest a nozzle pitch of between about 600 and 2400 dpi. Pet. 67– 69. The Petition supports this conclusion with citation to prior art references and Mr. Curley’s declaration testimony. Id. In his declaration, Mr. Curley supports his conclusions with respect to the “high density” disclosure of Hamafuku with specific references to the same prior art disclosures that are cited in the Petition. Ex. 1002 ¶¶ 318–323; Pet. 68 (both citing to disclosures in Exhibit 1008 and Exhibit 1025). We find this approach is appropriate. As noted by Patent Owner, Mr. Curley’s declaration spans over two hundred pages and contains a more extensive discussion of the prior art and the knowledge of one of ordinary skill in the art in the relevant time period. A declaration containing an in-depth discussion of the background of the relevant art, as well as a more complete analysis of the relevant prior art disclosures, is often more persuasive than a declaration that merely parrots the Petition, or vice versa, as it not only assists the panel in understanding the relevant technology, but also tends to demonstrate the declarant’s knowledge in the relevant field and his or her depth of analysis pertaining to the issues at hand. Of course, this extended analysis may not be incorporated-by-reference wholesale into a petition, but we discern no attempt to do so here, at least with respect to the nozzle pitch limitation disputed by the parties at this stage of the proceeding.” slip op. at 21
Claim construction§ 103 obviousnessPatents in suitUS 7,152,951 - Samsung Electronics Co., Ltd. v. Lynk Labs, Inc.Some claims unpatentablePTAB · May 5, 2023 · IPR2022-00098 · APJ Arthur M Peslak · IPR · Final written decision
Claims 1, 3, and 4 are unpatentable as obvious over the stated combinations; claim 2 was not shown unpatentable because the driver was not shown configured to receive the rectifier’s forward voltages.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“We agree with Patent Owner that a person of ordinary skill in the art would have had experience in LED devices. For this reason, we apply Patent Owner’s proposed level of ordinary skill in the art because it comports with the level of skill reflected in the ’149 patent and the prior art of record. However, if we were to apply Petitioner’s proposed level of skill, our Decision would not be affected.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Upon review of the entire record, we determine that no claim terms require express construction. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’”) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 10
- Expert testimonyPetitioner expert creditedPatent owner expert discountedMixed
“Dr. Ducharme’s testimony that “the spacing of the chips in Zhang would not likely be so close as to create overheating issues” (Ex. 2002 ¶ 111) is unsupported by any disclosure of the actual spacing of Zhang’s chips. Consequently, his testimony that there would be no overheating concerns in Zhang due to the spacing of the chips is entitled to little, if any, weight. Dr. Ducharme further testifies that the components of Zhang’s driver “could easily increase the temperature of the LED 19 chips on the circuit board, which can cause LEDs to generate less illumination, burn out and otherwise adversely affect their performance.” Ex. 2002 ¶ 126. Dr. Ducharme further testifies that “[i]t is well-known that excessive operational temperatures can reduce the illumination provided by the LEDs, can decrease the operational lifetime of the LEDs, and if the temperature is sufficiently high, it can cause LED junction failure and a burnt-out LED.” Id. We agree with this testimony, which as discussed below, is consistent with Salam. Dr. Ducharme’s testimony concerning overheating issues caused by the driver components contradicts Patent Owner’s ’s contention that there would not be “an overheating issue with Zhang’s LED exit sign circuit in Figure 2.1.” PO Resp. 30. Regardless of whether Zhang’s LEDs in Figure 2.1 have a heat problem or not, Salam teaches the advantages of using a heat sink. Salam teaches that a heat sink will result in a higher efficiency of the LEDs and improved life. Ex. 1006, 16:38–43. The Federal Circuit, in DyStar Textilfarben GmBH & Co v. C.H. Patrick Co., 464 F.3d 1356 (Fed. Cir. 2006), stated that “the desire to enhance commercial opportunities by improving a product or process is universal–and even common-sensical . . . the proper question is whether the ordinary artisan possesses the knowledge and skills rendering him capable of combining the prior art references.” Id. at 1368. Dr. Ducharme testified that a person of ordinary skill in the art “would have an understanding of the generation of heat and using a heat sink to remove unwanted heat from electronics and LED lighting devices.” Ex. 1102, 23:18–24:3. Dr. Ducharme’s testimony is consistent with Petitioner’s contention that the combination of Zhang and Salam “would have been a straightforward combination of known components and technologies, according to known methods, to produce the predictable result of reducing/ mitigating heat effects in a circuit.” Pet. 17 (citing Ex. 1002 ¶ 106). Patent Owner next contends it would be extremely burdensome and costly to modify Zhang to add a heat sink layer because “each of the multiple chips mounted and epoxied to Zhang’s circuit board in the exit sign would have to be modified.” PO Resp. 30 (citing Ex. 2002 ¶ 112). Dr. Ducharme’s testimony repeats the Patent Owner Response verbatim and is entitled to little, if any, weight. Ex. 2002 ¶ 112. Nonetheless, this contention is unavailing because it is based on Patent Owner’s bodily incorporation of Zhang and Salam. Patent Owner next contends that a person of ordinary skill in the art” slip op. at 27
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“Regardless of whether Zhang’s LEDs in Figure 2.1 have a heat problem or not, Salam teaches the advantages of using a heat sink. Salam teaches that a heat sink will result in a higher efficiency of the LEDs and improved life. Ex. 1006, 16:38–43. The Federal Circuit, in DyStar Textilfarben GmBH & Co v. C.H. Patrick Co., 464 F.3d 1356 (Fed. Cir. 2006), stated that “the desire to enhance commercial opportunities by improving a product or process is universal–and even common-sensical . . . the proper question is whether the ordinary artisan possesses the knowledge and skills rendering him capable of combining the prior art references.” Id. at 1368. Dr. Ducharme testified that a person of ordinary skill in the art “would have an understanding of the generation of heat and using a heat sink to remove unwanted heat from electronics and LED lighting devices.” Ex. 1102, 23:18–24:3. Dr. Ducharme’s testimony is consistent with Petitioner’s contention that the combination of Zhang and Salam “would have been a straightforward combination of known components and technologies, according to known methods, to produce the predictable result of reducing/ mitigating heat effects in a circuit.” Pet. 17 (citing Ex. 1002 ¶ 106).” slip op. at 27
Patent outcomesUS 10,517,149 mixedClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,517,149 - Home Depot USA, Inc. v. Lynk Labs, Inc.Some claims unpatentablePTAB · May 5, 2023 · IPR2022-00023 · APJ Arthur M Peslak · IPR · Final written decision
Claims 1 and 4 are unpatentable over the stated § 103 combinations; Petitioner did not show claim 2 unpatentable because it did not explain how the LED array’s forward voltage is received by the driver.
RulingsFinal written decision- Skill levelSkill level board ownOther
“degree in electrical engineering, or similar technical field, with two years of experience in the field of design and/or development of light-emitting diodes (LEDs) and circuits in the context of lighting control systems.” Pet. 11–12 (citing Ex. 1002 ¶ 34). Petitioner further contends that “[a]n increase in experience could compensate for less education.” Id. at 12. Patent Owner proposes the same level of skill in the art. See PO Resp. 6. We apply the parties’ undisputed level of ordinary skill in the art because it comports with the level of skill reflected in the ’149 patent and the prior art of record.” slip op. at 8
- Expert testimonyPetitioner expert creditedDecided for petitioner
“We credit Dr. Lebby’s testimony over Dr. Ducharme for the following reasons. First, in Deese, power cable 28 is inserted into an opening in rubber housing 21. Ex. 1008, Fig. 2A. [R]ubber housing 21 forms a water-tight seal around the power cable 28.” Id. at 4:63–65. Dr. Ducharme does not explain why Hochstein’s protruding heat sink shell could not similarly be inserted through rubber housing 21 with a water-tight seal. Further, Dr. Lebby relies on the similarity between the structures of Deese and Hochstein. Hochstein uses gasket 45 and weather seal 48 to seal housing 10 with electrical lead 49 and heat sink shell 38 extending therethrough. Ex. 1010, 5: 39–40, 5:63:65, Fig. 8.” slip op. at 47
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed patent owner constructionOther
“Our analysis starts with the claim language. Claim 1 recites “a driver, wherein the driver includes at least one transistor and at least one capacitor” and “the driver is configured to receive an AC voltage from a mains power source and provide a voltage and current to the at least one LED circuit.” Ex. 1001, 23:16–17, 26:22–24. Dr. Ducharme testifies that power is determined by multiplying voltage and current. Ex. 2008 ¶ 63. The language of claim 1, thus, supports Patent Owner’s construction which is also consistent with the dictionary definition offered by Petitioner which also defines “driver” as [a] program, circuit or device used to power or control other programs, circuits or devices.” Ex. 1007, 4 (emphasis added). The Specification provides “the driver providing an AC voltage and current to one or more LED circuits.” Ex. 1001, 3:65–67. Thus, the Specification also provides support for Patent Owner’s construction. For the foregoing reasons, we apply Patent Owner’s proposed construction of “driver” because it is consistent with the language of claim 1 and the description of driver in the Specification. We note that the adjective “LED” prior to circuits or devices in Patent Owner’s construction is not necessary because that it essentially repeats limitation 1.e.” slip op. at 12
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITADecided for petitioner
“We begin with the claim language itself which is “the package is a heat sinking reflective material.” Ex. 1001, 23:18–19 (emphasis added). In its analysis, Patent Owner parses “heat sinking reflective material” out of context by omitting the italicized language “the package is” preceding “heat sinking reflective material.” PO Resp. 29. The deposition testimony of Dr. Lebby and Dr. Ducharme’s declaration testimony cited by Patent Owner are also out of context. The Specification of the ’149 patent defines “package” as an integrated unit that “in certain applications may preferably include a heat sink, a reflective material, a lens for directing light, phosphor nano-crystals or light changing or enhancing substances.” Ex. 1001, 5:30–33. Because heat sink and reflective material are listed separately in the Specification, this disclosure suggests that, at least in certain embodiments, a package with a heat sink separate from a reflective material would fall within the scope of limitation 1.c. This is further confirmed by comparing the packages illustrated in Figures 25 and 26 of the ’149 patent which are reproduced above. Figure 25 is described as illustrating “heat sinking material 198 . . . integrated into the package 30.” Id. at 17:34–35. Figure 26 is described as illustrating reflector 202 “integrated into the package 30 for optimized light dispersion.” Id. at 17:47–49. As can be seen from a visual comparison of Figures 25 and 26, reflector 202 is separate from heat sinking material 198. Given the disclosure in the ’149 patent of a package with a heat sink” slip op. at 15
Patent outcomesUS 10,517,149 mixedClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,517,149 - Home Depot USA, Inc. v. Lynk Labs, Inc.All claims unpatentablePTAB · Mar 29, 2023 · IPR2021-01540 · APJ Scott Raevsky · IPR · Final written decision
Claims 33, 34, 38, 39, and 43 are unpatentable as obvious over Teshima and SISE, or over Teshima, Butterworth, and SISE.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“[a] person of ordinary skill in the art (“POSITA”) . . . would have had a bachelor’s degree in electrical engineering, or similar technical field, with two years of relevant experience in the field of design and/or development of LEDs and circuits in the context of lighting control and networking systems. An increase in experience could compensate for less education. Pet. 10–11 (citing Ex. 1002 ¶ 34). Patent Owner states that it “adopts this definition of level of ordinary skill for purposes of this proceeding only.” PO Resp. 5. We are persuaded that Petitioner’s proposal is consistent with the problems and solutions in the ’842 patent and prior art of record. We adopt Petitioner’s definition of the level of skill.” slip op. at 6
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We determine that no other terms require construction. See Realtime Data, LLC v. Iancu, 912 F.3d 1368 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner
“We find Petitioner’s arguments more persuasive. As a threshold matter, we disagree with Patent Owner that “coated” requires a “thin layer.” We note that Patent Owner did not construe “coated” in its Patent Owner Response, relying only on a single citation to its expert declaration for the proposition that “coated” refers to a “thin layer.” PO Resp. 27 (citing Ex. 2007 ¶ 80). There, Dr. Bretschneider merely cites a dictionary definition without analysis or discussion in support of his testimony that “[c]oating an LED is adding a thin layer or covering to something.” Ex. 2007 ¶ 79. When questioned about this, he testified, “I didn’t equate that [statement in the declaration] to an opinion equivalent to claim construction.” Ex. 1038, 132:2–14. Patent Owner also does not discuss the intrinsic record in support of its implicit claim construction position. Based on our review of the intrinsic record, we can find no special definition or disavowal associated with the term “coated.” We also find Patent Owner’s dictionary definition unhelpful, as the meaning of “thin” layer is unclear. See Ex. 2007 ¶ 79. Moreover, Leung refers to “coating an LED with a phosphor layer” and that “it is often difficult to control the phosphor layer’s geometry and thickness,” which undercuts Patent Owner’s position that a coated layer must be thin. See Ex. 1037 ¶ 8.” slip op. at 26
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“We agree with Petitioner that SISE is analogous art to the ’842 patent. The field of endeavor of the ’842 patent is LED lighting systems. The ’842 patent explains that “LED based lighting may be used for general lighting, specialty lighting, signs, and decoration such as for Christmas tree lighting.” Ex. 1001, 1:66–2:2; see also id. at code (54) (“AC Light Emitting Diode and AC LED Drive Methods and Apparatus”). This is a broad field of endeavor, and we discern no relevant distinction between LED lighting systems that are used to illuminate an area or object and those used to signal information, such as traffic signals. Further, Patent Owner’s arguments here are inconsistent with its arguments in a related proceeding, IPR2021-01369. There, Patent Owner argued that the field of endeavor in a continuation patent of the ’842 patent was “LED lighting systems.” Home Depot USA, Inc. v. Lynk Labs, Inc., IPR2021-01369, Paper 45 at 17 (PTAB Feb. 14, 2023). Here, Patent Owner contends that the ’842 patent’s field of endeavor is “LED lighting systems and specifically circuits for driving LED lighting systems.” PO Resp. 42. As both patents share a common specification and Patent Owner does not explain why it proposes a different field of endeavor, we determine that the field of endeavor here is also “LED lighting systems.”” slip op. at 15
Patent outcomesUS 10,091,842 unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,091,842 - Samsung Electronics Co., Ltd. v. Lynk Labs, Inc.All claims unpatentablePTAB · Mar 15, 2023 · IPR2021-01346 · APJ Scott Raevsky · IPR · Final written decision
Claims 3–16 are unpatentable as obvious under §103 over the seven combinations of prior art listed in the decision.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“These definitions are very similar, but we are persuaded that Patent Owner’s proposal is more consistent with the problems and solutions in the ’466 patent and prior art of record. Petitioner’s use of the term “and/or” is problematic because it makes experience with LED devices optional. In contrast, Patent Owner’s definition requires two or more years of experience with LED devices and related LED circuit design. We therefore adopt Patent Owner’s definition of the level of skill. Had we adopted Petitioner’s level of skill, however, the outcome here would not have changed.” slip op. at 6
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Neither party proposes any claim constructions. Pet. 6; PO Resp. 8–9; Reply 1. We determine that no terms require construction. See Realtime Data, LLC v. Iancu, 912 F.3d 1368 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“We agree with Petitioner. Patent Owner indeed relies on an improper bodily incorporation argument. Petitioner does not propose bodily incorporating Siwinski and Srivastava together, but rather taking certain teachings from these references and applying them to Hack. Reply 11, 14. For example, Petitioner argues that a POSITA would have relied on Siwinski’s teachings “to configure Hack’s device to implement a circuit configured to detect touch via capacitive sensing.” Pet. 28 (citing Ex. 1002 ¶ 124). And Petitioner relies on Srivastava for the teaching that a POSITA would have configured Hack’s device with a lens doped with particles configured to receive and transmit light from a plurality of LEDs. Id. at 29– 30 (citing Ex. 1002 ¶¶ 126–32). Patent Owner’s argument that Srivastava’s shell is not combinable with Siwinski’s touch screen misdirects our attention to a combination that Petitioner did not propose, and is a bodily incorporation that fundamentally misapplies the law of obviousness. “The test for obviousness is not whether the features of a secondary reference may be bodily incorporated into the structure of the primary reference . . . . Rather, the test is what the combined teachings of the references would have suggested to those of ordinary skill in the art.” MCM Portfolio LLC v. Hewlett-Packard Co., 812 F.3d 1284, 1294 (Fed. Cir. 2015) (quoting In re Keller, 642 F.2d 413, 425 (CCPA 1981)). Regardless, Petitioner’s arguments are not conclusory. The Reply persuasively argues that “Srivastava’s express applicability to OLEDs and display backlights is consistent with Hack’s OLED backlight features.” Reply 11 (citing, e.g., Ex. 1052, 1:10–12, 5:29–38). We are further persuaded by Petitioner’s evidence supporting that “the use of a lens with LED backlight configurations was known,” which undercuts Mr. Credelle’s testimony that Srivastava’s lens would be incompatible with a touch screen backlight. Id. (citing, e.g., Ex. 1090 (depicting a lens over multiple OLED color elements), Fig. 13; Ex. 1098, code (57) (“display back lighting system” with an “entrance lens” and a “reflecting lens”); Ex. 1099, code (57) (“backlight assembly” with “a closely packed array of hemispherical or spherical lenses”)); see Ex. 2001 ¶¶ 96–97. And contrary to Mr. Credelle’s testimony that “[i]t would be illogical to form Srivastava’s shell over Siwinski’s touch screen because the shell would prevent touching the touch screen, which is the function of the touch screen,” Petitioner persuasively argues that “Srivastava explains that it was known that LEDs are used as a backlight in liquid crystal displays.” Reply 11. In other words, Petitioner’s reliance on Srivastava’s backlight teachings would not prevent a user from touching a screen (in front of the backlight) in the modified device. Accordingly, we agree with Petitioner that one of ordinary skill in the art would have combined Hack, Siwinski, and Srivastava to achieve this limitation.” slip op. at 16
- Strike new argumentNew argument disregardedDecided for petitioner
“We start our analysis with the Sur-reply because it exposes several weaknesses in Patent Owner’s arguments. First, contrary to what the Sur-reply contends, the Patent Owner response did not argue that “Srivastava’s LED shell is incompatible with Hack’s touch screen because the hard shell would interfere with the functionality of the touchscreen.” Id. This is a new argument first made in the Sur-reply, and we do not consider it. See 37 C.F.R. § 42.23(b). What Patent Owner actually argued in its Response was that “[a] POSITA would not combine Srivastava’s LED shell for a single LED with Hack’s flexible display.” PO Resp. 24. There is no mention of a “hard shell” interfering with the functionality of the touch screen in the Patent Owner Response. See id. At most, Patent Owner contends that the shell would “prevent touching the screen,” and that the “curvature of the shell” would be incompatible, not that any hardness of the shell would present a problem. Id. at 25–26 (quoting Ex. 2001 ¶ 97). Regardless, even if we consider this argument, it is inapposite because as the Reply correctly notes, “Srivastava explains that it was known that LEDs are used as a backlight in liquid crystal displays,” and we accordingly find that a backlight with a hard shell would not interfere with a user touching a display. See Reply 11 (citing Pet. 30–33; Ex. 1052, 1:10–12).” slip op. at 28
Patent outcomesUS 10,499,466 unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,499,466 - Eve Energy Co., Ltd. v. Varta Microbattery GmbHInstitution deniedPTAB · Mar 14, 2023 · IPR2022-01487 · APJ Christopher M Kaiser · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 9–16 were obvious over either asserted ground.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“review. 35 U.S.C. § 314(b); 37 C.F.R. § 42.4(a) (2020). The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted unless “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.”” slip op. at 2
- BurdenNot shown unpatentable
“crimping or beading-over process of closing a battery casing, Petitioner offers only attorney argument for the proposition that such a process creates a battery casing that is “held together by a force-fitting connection.” Id. But “[a]ttorney argument is not evidence.” Elbit Sys. of Am., LLC v. Thales Visionix, Inc., 881 F.3d 1354, 1359 (Fed. Cir. 2018) (quoting Icon Health & Fitness, Inc. v. Strava, Inc., 849 F.3d 1034, 1043 (Fed. Cir. 2017)).” slip op. at 15
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“27–28. Patent Owner responds that no term requires construction at this stage of the proceeding. Prelim. Resp. 20. For the reasons discussed below, we are able to determine whether to institute trial without construing “insulating means,” so we do not construe this term. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Ltd., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 9
Claim constructionPatents in suitUS 9,799,913
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.