PTAB
Advanced fields
513 decisions · 535msnewest first
  • PTAB · Jun 9, 2025 · IPR2025-00020 · APJ Matthew S Meyers · IPR · Institution

    The Board denied institution because Petitioner did not show a reasonable likelihood that claims 11–15 were unpatentable over the asserted obviousness grounds.

    RulingsInstitution decision
    • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

      “determine whether to institute an inter partes review. 35 U.S.C. § 314; 37 C.F.R. § 42.4(a) (2020). The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted unless “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least [one] of the claims challenged in the petition.”” slip op. at 2

    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “For purposes of the instant Decision, “Nike applies New Balance’s definition for a person of ordinary skill in the art.” Prelim. Resp. 11. Based on the record presented, we determine that Petitioner’s definition of a person of ordinary skill in the art is consistent with the scope and content of the ’932 patent and the asserted prior art, and, at this stage, we apply Petitioner’s definition for purposes of this Decision.” slip op. at 9

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “Patent Owner acknowledges that it agreed to the constructions identified by Petitioner. Prelim. Resp. 12. Patent Owner also notes that it agreed to these proposed constructions in the Related Litigation. Id. at 13. However, Patent Owner argues that for purposes of this Preliminary Response, “no terms require construction.” Id. (citing Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019)). Based on the record before us, we need not expressly construe any claim terms.” slip op. at 10

    • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

      “limitation would have been obvious because one of ordinary skill in the art would have understood that Becker’s stiffer outer lining would have “restrict[ed] the mobility of the ankle, “not allow[ed] for tightening,” and known to “hav[e] the inner lining extend up above the outer lining.” Pet. 33 (citing Ex. 1003 ¶¶ 122–123). Petitioner relies on conclusory reasoning grounded in hindsight to assert that it would have been obvious for “the skin layer [to be] absent from the ankle part of the knitted component,” as required by limitation [11.d]. The difficulty with Petitioner’s position is that neither Becker nor the other cited references disclose, teach, suggest, or otherwise provide motivation for “the skin layer being absent from the ankle part of the knitted component,” as claimed.” slip op. at 25

    Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 8,898,932
  • PTAB · Jun 9, 2025 · IPR2025-00151 · APJ Ken B Barrett · IPR · Institution

    The Board denied institution because Petitioner did not show a reasonable likelihood of proving any of claims 1–27 unpatentable on the asserted anticipation and obviousness grounds.

    RulingsInstitution decision
    • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

      “An inter partes review may not be instituted “unless . . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Having considered the arguments and evidence presented by Petitioner and Patent Owner, we determine that Petitioner has not demonstrated a reasonable likelihood of prevailing on at least one of the challenged claims of the ’636 patent. Accordingly, we do not institute an inter partes review of the challenged claims.” slip op. at 2

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

      “25:5 (limitation 1a1: “a portion of the knitted component defining the upper”). “Where a claim lists elements separately, ‘the clear implication of the claim language’ is that those elements are ‘distinct component[s]’ of the patented invention.” Becton, Dickinson & Co. v. Tyco Healthcare Grp., LP, 616 F.3d 1249, 1254 (Fed. Cir. 2010) (quoting Gaus v. Conair Corp., 363 F.3d 1284, 1288 (Fed. Cir. 2004)) (alteration in original). Thus, the claim language suggests that the “integral knit tongue” is a component distinct, at least to some degree, from the “upper.” See also Ex. 1001, 2:27–28 (the Specification stating that “[a] knitted component including the upper and an integral knit tongue is incorporated into the article of footwear.”). Limitation 1d reinforces this understanding by requiring the tongue to be joined to a portion of the throat area of the upper. See id. at 6:35–38 (the Specification indicating that the “throat area” is an area of the upper); cf. Ex. 2014, 18–19 (defining “Throat”: “The main opening of a shoe extending from the vamp [(the front part of a shoe upper that covers the toes and part of the foot)] to the ankle.”). In addition to suggesting that the tongue is a component distinct from the upper, the claim language indicates that the integral knit tongue extends through a throat area. See Ex. 1001, 25:10–11 (limitation 1b: “an integral knit tongue . . . extending through a throat area of the knitted component”). With that context, we turn to the parties’ arguments.” slip op. at 11

    • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentable

      “claim language does not specify it, both parties contend that the “portion of the knitted component” constitutes the majority of the upper. See Pet. 25– 26, 30 (Petitioner applying in this ground that which it characterizes as Patent Owner’s claim construction position); Prelim. Resp. 43 (Patent Owner noting that the Specification states that “a majority of upper 120 is formed from a knitted component 130,” and contending that limitation 1a1 means that “a majority of the upper must be knitted.” (quoting Ex. 1001, 6:57–59)). Nevertheless, we determine for the following reasons that Petitioner has not shown sufficiently that central textile element 60 of Dua-956 defines an upper within the meaning of the claims. See Pet. 26. Petitioner contends that, “[w]ith respect to what defines the upper, the ’636 patent discloses that the ‘upper generally extends over the instep and toe areas of the foot, along the medial and lateral sides of the foot, under the foot, and around the heel area of the foot.’” Pet. 27 (citing Ex. 1001, 1:44–46, 6:66–67). Petitioner reasons that, “[a]s such, the ’636 patent describes the upper as extending around six parts of the foot: (1) the instep area, (2) the toe area, (3) the medial side, (4) the lateral side, (5) under the foot, and (6) the heel area.” Id. Applying this reasoning to the reference, Petitioner contends that, “[o]f the six upper parts identified in the ’636 patent, only two of them—the medial and lateral sides—are not formed by the central textile element 60,” and therefor “the majority of the parts of the upper are formed by the central element 60.” Id. at 30 (citing Ex. 1002 ¶¶ 103–109). Petitioner provides an annotated versions of Figures 8B and 8C of Dua-956, reproduced below, to depict its contentions. Id. at 30. Above are Figures 8B and 8C of Dua-956—which are, respectively, perspective views depicting a second step and a third step in assembling the article of footwear (Ex. 1029, 3:41–45)—with central textile element 60 shaded green. As Petitioner concedes (Pet. 30) and as the annotated figures above show, central textile element 60 does not form the medial and lateral sides of the footwear. Thus, even if central textile element 60 constitutes the majority of parts of the upper, the sides of the upper remain undefined by the central textile element. Petitioner does not explain adequately how the upper is defined when the side components are missing. We determine that Petitioner has not demonstrated adequately for institution that Dua-956 discloses “a portion of the knitted component defining the upper,” as recited in independent claim 1.” slip op. at 20

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentable

      “Petitioner contends that “both upper 70 and 30' are constructed as a single, unitary knit element that defines the upper, and it would have been obvious to construct upper 30 in the same manner.” Pet. 65. Petitioner next turns to Horii, asserting that “Horii discloses “shoes 1 that are characterized by the fact that the entire upper is constructed of a single piece of upper member 2 that is made through weft knitting or circular knitting.’” Id. at 67 (citing Ex. 1017, 9) (emphasis omitted). Petitioner reasons that “[a] POSITA would have been motivated to manufacture Dua-956’s upper 30, for example, using the multilayer, single fabric of Horii because Horii’s single-piece knit upper would have provided upper 30 with a seamless structure.” Id. at 68. We disagree with Petitioner’s assertion that “[c]onstructing Dua-956’s upper 30 as a single, unitary knit component would not materially change the analysis under Ground 1A.” Pet. 70. In Ground 1A, Petitioner contends that “‘forward portion 61’ of the central textile element 60 is an integral knit tongue that extends through a throat area of the knitted component in the assembled upper 30.” Id. at 34. During the assembly of footwear 10, forward portion 61 is flipped over the top of the footwear and the separate textile elements 40 and 50 (the sides of the footwear) are stitched to the lateral and medial edges (64a and 64b) of forward portion 61—the purported tongue. See Ex. 1029, 9:5–11, Figs. 8B, 8C. Petitioner does not explain adequately how, when modifying the embodiment used in Ground 1A to have a seamless top portion, the purported integral knit tongue is retained in that combination. See Pet. 70 (Petitioner asserting that the proposed combination would still have an exterior surface, an inner surface, lace elements 33, channels 44/54, and loops 35, “along with the other structures identified under Ground 1A,” but not specifically discussing the purported integral knit tongue.). We determine that Petitioner has not demonstrated a reasonable likelihood of demonstrating that claims 1–6, 8–17, and 19–27 would have been obvious over Dua-596 alone or in combination with Horii.” slip op. at 24

    Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 9,510,636
  • PTAB · Jun 9, 2025 · IPR2025-00150 · APJ Ken B Barrett · IPR · Institution

    The Board denied institution because Skechers did not show a reasonable likelihood that claims 1–23 were unpatentable, principally because the asserted art did not disclose the construed integral knit tongue.

    RulingsInstitution decision
    • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsDenied

      “An inter partes review may not be instituted “unless . . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Having considered the arguments and evidence presented by Petitioner and Patent Owner, we determine that Petitioner has not demonstrated a reasonable likelihood of prevailing on at least one of the challenged claims of the ’562 patent. Accordingly, we do not institute an inter partes review of the challenged claims.” slip op. at 2

    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “Petitioner contends that: A person of ordinary skill in the art (“POSITA”) in the field of the ’562 patent in February 2012 would have been someone with at least a few years of experience in knit materials and knitting methods and machines that can be used in making footwear, or a bachelor’s degree in textile-related sciences, engineering, or industrial product design, or equivalent academic or work experience, including in the footwear industry. EX1002, ¶68. Such a person of ordinary skill would have at least a general understanding of general construction processes and materials used in the manufacturing process of fabric-based articles. For individuals with a lower educational level, a person could still be of ordinary skill in the art provided that person’s working experience compensates for any such lower educational level, or vice versa. See id. Pet. 22. Patent Owner states that, “[f]or the purposes of this Preliminary Response only, Nike applies Petitioner’s proposed level of skill in the art.” Prelim. Resp. 15. Petitioner’s definition is consistent with the level of ordinary skill reflected in the prior art references of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (recognizing that the prior art itself may reflect an appropriate level of skill in the art). For purposes of this decision, we apply Petitioner’s definition of the person of ordinary skill in the art.” slip op. at 8

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

      “inquiries.” Medichem, S.A. v. Rolabo, S.L., 353 F.3d 928, 933 (Fed. Cir. 2003). “The first step in both analyses is a proper construction of the claims . . . [and t]he second step in the analyses requires a comparison of the properly construed claim to the prior art.” Id. Although an explicit claim construction analysis by a petitioner is not required in every case, a petition nonetheless must identify how the challenged claims are to be construed and how, as so construed, they are unpatentable under the statutory grounds asserted. 37 C.F.R. § 42.104(b)(3)–(4). And, being part of a prima facia case, such an analysis is part of Petitioner’s burden to demonstrate a reasonable likelihood of prevailing on its patentability challenges. Petitioner has failed to satisfy the threshold burden for every ground based on this construction.” slip op. at 14

    • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

      “We do not find Petitioner’s contentions regarding the two annotated figures to be persuasive. First, those contentions, and the cited opinions of Dr. Adanur, are based on a claim construction that, as discussed above, we reject and for which neither party advocates. Second, Petitioner does not explain adequately why a person of ordinary skill in the art would discern, even with Petitioner’s added red ovals, a tongue distinct from the upper and tongue extending through the throat area. We also do not find persuasive Petitioner’s contentions regarding differing textures. See Pet. 32–33. Even if differing textures could rise to the level of distinguishing an integral knit tongue from the upper, the purported tongue texture 48" is not confined to the area identified by Petitioner as the tongue. See Pet. 31 (annotated Figure 11, reproduced above). For example, texture 48" outside of Petitioner’s oval appears to wrap approximately halfway around the ankle opening, which is not argued to be consistent with an ordinary artisan’s understanding of a tongue. Or, put another way, there is no indication that the portion of the 48" texture within Petitioner’s red oval, which purportedly represents the tongue, is distinguishable from the remaining portion of the 48" texture outside of the red oval. We are not persuaded that Petitioner has demonstrated a reasonable likelihood of proving that a person of ordinary skill in the art would consider the relatively large area depicted as having texture 48" to be an “integral knit tongue.” In light of the above, we determine that Petitioner has not demonstrated a reasonable likelihood of prevailing on its challenge to independent claim 1 and its dependent claims 2–4 as anticipated by Dua-592.” slip op. at 23

    Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 9,060,562
  • PTAB · May 27, 2025 · IPR2025-00143 · APJ Michael J Fitzpatrick · IPR · Institution

    The Board denied institution because the Petition did not show a reasonable likelihood of proving claims 1–20 obvious over either asserted combination.

    RulingsInstitution decision
    • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

      “For this reason, the Petition fails to demonstrate that the asserted prior art teaches, or renders obvious, the subject matter of claims 1 and 12. Thus, there is not a reasonable likelihood of Petitioner prevailing as to either of the independent claims. 2. Dependent Claims The remaining claims, namely claims 2–11 and 13–20, all ultimately depend from either claim 1 or claim 12. Thus, there is not a reasonable likelihood of Petitioner prevailing as to any of the dependent claims. See In re Fine, 837 F.2d 1071, 1076 (Fed. Cir. 1988) (“Dependent claims are nonobvious under section 103 if the independent claims from which they depend are nonobvious.”).” slip op. at 18

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

      “[c]onventional articles of athletic footwear include two primary elements, an upper and a sole structure.” Ex. 1001, 1:3940 (cited at Prelim. Resp. 16). Patent Owner also cites its statement that “[t]he primary elements of footwear 10 are depicted in FIG. 1 as being a sole structure 20 and an upper 30.” Ex. 1001, 4:62– 63 (cited at Prelim. Resp. 16). Additionally, Patent Owner points out (correctly) that every figure of the ’781 patent “depict[s] shoes[] or textile elements that are designed to be incorporated into shoes.” Prelim. Resp. 16. Finally, Patent Owner points to surrounding claim language in both of independent claims 1 and 12 that supports its construction. With respect to claim 1, Patent Owner points out that it “recite[s] an ‘upper’ that is ‘for an article of footwear.’” Id. (quoting claim 1). With respect to claim 12, Patent Owner points out that it “recite[s] . . . an ‘article of footwear comprising’ an ‘upper.’” Id. (quoting claim 12). We agree that the Specification supports Patent Owner’s construction. slip op. at 10

    • Claim Construction › Intrinsic evidence (Phillips canons) › Preamble limiting or notPreamble limitingDecided for patent owner

      “A claim’s preamble is not necessarily limiting. See, e.g., Pitney Bowes Inc. v. Hewlett Packard Co., 182 F.3d 1298, 1305 (Fed. Cir. 1999). The Petition does not take a position as to whether the preambles of claims 1 and 12 are limiting. See Pet. 53 (“If the preamble [of claim 1] is limiting, Cusinato, Bellak, and Dua each disclose an upper for an article of footwear.”), 85 (claim 12 analysis referring back to claim 1 analysis). We construe the preambles of claims 1 and 12 to be limiting, as guided by case law. It is clear that the preambles are being used to help define the invention, i.e., an upper for an article of footwear in the case of claim 1 and an article of footwear having an upper in the case of claim 12. See Bell Communications Research Inc. v. Vitalink Commcations Corp., 55 F.3d 615, 620 (Fed. Cir. 1995) (“[A] claim preamble has the import that the claim as a whole suggests for it. In other words, when the claim drafter chooses to use both the preamble and the body to define the subject matter of the claimed invention, the invention so defined, and not some other, is the one the patent protects.”). Moreover, the bodies of both claims recite “the upper” which, in the case of claim 1, derives its antecedent basis directly from the preamble and, in the case of claim 12, relies on the preamble’s article of footwear which is recited as comprising an upper. See Eaton Corp. v. Rockwell Int’l Corp., 323 F.3d 1332, 1339 (Fed. Cir. 2003) (“When limitations in the body of the claim rely upon and derive antecedent basis from the preamble, then the preamble may act as a necessary component of the claimed invention.”).” slip op. at 14

    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “As to this hypothetical construct, Petitioner proposes the following: A person of ordinary skill in the art (“POSITA”) in the field of the '781 [patent] in March 2004 would have been someone with at least a few years of experience in knit materials and knitting methods and machines that can be used in making footwear, or a bachelor’s degree in textile-related sciences, engineering, or industrial product design, or equivalent academic or work experience, including in the footwear industry. See EX1002, ¶78. Such a person of ordinary skill would have at least a general understanding of general construction processes and materials used in the manufacturing process of fabric-based articles. Id. For individuals with a lower educational level, a person could still be of ordinary skill in the art provided that person's working experience compensates for any such lower educational level, or vice versa. Id. Pet. 36. Patent Owner does not oppose Petitioner’s proposal. Prelim. Resp. 14– 15. Thus, for purposes of deciding the Petition, we adopt Petitioner’s proposal.” slip op. at 8

    Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 9,986,781
  • PTAB · May 21, 2025 · IPR2025-00193 · APJ Sheridan K Snedden · IPR · Institution

    The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1, 3, 6, 10, 11, 16, 18, 21, 24–26, or 30 were unpatentable on any asserted ground.

    RulingsInstitution decision
    • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

      “To institute an inter partes review, we must determine that the information presented in the Petition shows “a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). After considering the evidence and arguments presented in the Petition, we determine that Petitioner has not demonstrated a reasonable likelihood of success in proving that at least 1 claim of the ’030 patent is unpatentable.” slip op. at 2

    • BurdenNot shown unpatentable

      “What is missing from Petitioner’s stated motivation for modifying the array of Cantor is a reason why a POSA would seek to correlate the identification sequence with a location on the array at all. Prelim. Resp. 72. Indeed, the location of a bead on the substrate is not pertinent to the analysis disclosed in Cantor. Ex. 2002 ¶ 172; see also id. at ¶ 31 (Cantor “does not relate to the [spatial] analysis of tissue samples . . . .”). “[O]bviousness concerns whether a skilled artisan not only could have made but would have been motivated to make the combinations or modifications of prior art to arrive at the claimed invention.” Belden Inc. v. Berk-Tek LLC, 805 F.3d 1064, 1073 (Fed. Cir. 2015). Here, Cantor fails to teach or suggest capture probes distributed randomly on a substrate comprising a nucleic acid sequence that identifies a unique location on the substrate as required by the challenged claims, and Petitioner fails to adequately articulate why a person of ordinary skill in the art would have modified Cantor to make the recited capture probes. In view of the above, we find that, on this record, Petitioner has failed to establish that Cantor teaches or suggests each element of the challenged claims. Accordingly, we determine that Petitioner has not demonstrated a reasonable likelihood of prevailing on its challenge that any of claims 1, 3, 6, 10, 11, 16, 18, 21, 24–26, and 30 would have been obvious over Cantor.” slip op. at 20

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “Petitioner does not argue that any claim term requires construction. Pet. 22–23. Likewise, Patent Owner takes the position that “no claim terms 2 Person of ordinary skill in the art. require explicit construction” for purposes of determining whether to institute inter partes review. Prelim. Resp. 19. Having considered the parties’ positions and evidence of record, we determine that no express construction of any claim term is necessary to determine whether to institute inter partes review. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Matal, 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 8

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

      “What is missing from Petitioner’s stated motivation for modifying the array of Cantor is a reason why a POSA would seek to correlate the identification sequence with a location on the array at all. Prelim. Resp. 72. Indeed, the location of a bead on the substrate is not pertinent to the analysis disclosed in Cantor. Ex. 2002 ¶ 172; see also id. at ¶ 31 (Cantor “does not relate to the [spatial] analysis of tissue samples . . . .”). “[O]bviousness concerns whether a skilled artisan not only could have made but would have been motivated to make the combinations or modifications of prior art to arrive at the claimed invention.” Belden Inc. v. Berk-Tek LLC, 805 F.3d 1064, 1073 (Fed. Cir. 2015). Here, Cantor fails to teach or suggest capture probes distributed randomly on a substrate comprising a nucleic acid sequence that identifies a unique location on the substrate as required by the challenged claims, and Petitioner fails to adequately articulate why a person of ordinary skill in the art would have modified Cantor to make the recited capture probes. In view of the above, we find that, on this record, Petitioner has failed to establish that Cantor teaches or suggests each element of the challenged claims. Accordingly, we determine that Petitioner has not demonstrated a reasonable likelihood of prevailing on its challenge that any of claims 1, 3, 6, 10, 11, 16, 18, 21, 24–26, and 30 would have been obvious over Cantor.” slip op. at 20

    Claim construction§ 102 anticipation§ 103 obviousness
    Patents in suitUS 11,761,030
  • PTAB · May 21, 2025 · IPR2025-00192 · APJ Sheridan K Snedden · IPR · Institution

    The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1, 5, 17, 20, 23, 28, or 29 were unpatentable over the asserted grounds.

    RulingsInstitution decision
    • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

      “To institute an inter partes review, we must determine that the information presented in the Petition shows “a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). After considering the evidence and arguments presented in the Petition, we determine that Petitioner has not demonstrated a reasonable likelihood of success in proving that at least 1 claim of the ’138 patent is unpatentable.” slip op. at 2

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

      “[O]bviousness concerns whether a skilled artisan not only could have made but would have been motivated to make the combinations or modifications of prior art to arrive at the claimed invention.” Belden Inc. v. Berk-Tek LLC, 805 F.3d 1064, 1073 (Fed. Cir. 2015). Here, Cantor fails to teach or suggest capture probes distributed randomly on a substrate comprising a nucleic acid sequence that identifies a unique location on the substrate as required by the challenged claims, and Petitioner fails to adequately articulate why a person of ordinary skill in the art would have modified Cantor to make the recited capture probes. In view of the above, we find that, on this record, Petitioner has failed to establish that Cantor teaches or suggests each element of the challenged claims. Accordingly, we determine that Petitioner has not demonstrated a reasonable likelihood of prevailing on its challenge that any of claims 1, 5, 17, 20, 23, 28, and 29 would have been obvious over Cantor. slip op. at 21

    • Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date awardedDecided for patent owner

      “3. Discussion Petitioner challenges whether certain elements of independent claims 1 and 17 are supported by the ’124 provisional and/or whether the ’138 patent’s priority chain is intact. Pet. 52–60. Having considered the parties’ positions and evidence of record, however, we agree with Patent Owner’s written description analysis, summarized above, and find (1) that the ’124 Provisional provides adequate written description support for each of the challenged claim elements; (2) that the ’138 patent’s priority chain is intact; and (3) that the ’138 patent is therefore entitled to the priority date of April 5, 2010. Consequently, Frisen is not prior art to the challenged claims.” slip op. at 28

    • Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference not prior artDecided for patent owner

      “3. Discussion Petitioner challenges whether certain elements of independent claims 1 and 17 are supported by the ’124 provisional and/or whether the ’138 patent’s priority chain is intact. Pet. 52–60. Having considered the parties’ positions and evidence of record, however, we agree with Patent Owner’s written description analysis, summarized above, and find (1) that the ’124 Provisional provides adequate written description support for each of the challenged claim elements; (2) that the ’138 patent’s priority chain is intact; and (3) that the ’138 patent is therefore entitled to the priority date of April 5, 2010. Consequently, Frisen is not prior art to the challenged claims.” slip op. at 28

    Claim construction§ 102 anticipation§ 103 obviousness
    Patents in suitUS 11,549,138
  • PTAB · Apr 25, 2025 · IPR2024-01463 · APJ David Cotta · IPR · Institution

    The Board instituted inter partes review of claims 1–10 on all asserted grounds, finding a reasonable likelihood of success on at least one claim.

    RulingsInstitution decision
    • PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner

      “predict how the district court in the related district court litigation will proceed because the court may determine whether or not to stay any individual case . . . based on a variety of circumstances and facts beyond our control and to which the Board is not privy.” Sand Revolution II LLC v. Cont’l Intermodal Grp., IPR2019-01393, Paper 24, 7 (PTAB June 16, 2020) (informative). We decline to speculate on how the court may rule on the pending motion to stay. Accordingly, this factor is neutral.” slip op. at 13

    • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

      “Under 35 U.S.C. § 314(a), inter partes review may not be instituted unless the Petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Petitioner has established a reasonable likelihood of prevailing on its assertion that at least one of the challenged claims is unpatentable based on the grounds advanced here. We decline to deny the Petition on a discretionary basis as requested by Patent Owner. Thus, for reasons explained below, we institute inter partes review of claims 1–10 of the ’706 patent.” slip op. at 2

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted

      “TC(220), and ΔRz/Ra are result effective variables and that copper foils having ΔPD, TC(220), and ΔRz/Ra values that meet the values recited in claim 1 have advantageous properties. See, e.g., Ex. 1005 ¶ 45 (Kim ’761, disclosing that preferably the “difference in peak count roughness Rpc between the shiny surface . . . and the matte surface . . . of the electrolytic copper foil . . . is preferably 60 or less” because “when the difference in the peak count roughness Rpc exceeds 60 capacity maintenance of the secondary battery is deteriorated.”);15 Ex. 1007, 3:16–23, 4:14–23 (Cheng, disclosing that the foils of Cheng’s invention have (220) and (311) surfaces that provide increased elongation and that solve a high roughness problem that rendered traditional products unsuitable for use in a lithium ion secondary battery), 10:27–34 (Cheng, disclosing that in the foils of Cheng’s invention “the roughness difference between both sides was extremely small” and thus “it was . . . not easy for the electrolytic copper foil to break or fracture during the charging-discharging cycles and the life of a battery is thus increased”), Tables 3 & 4 (Cheng, disclosing embodiments and comparative examples with TC(220) values meeting the requirements of claim 1); Ex. 1008, 6:36–44 (Wolski, disclosing that “the surface roughness Rz at the matte side of the untreated copper foil of the present invention is the same or smaller than the surface roughness Rz at the shiny side . . . so that the surface treated copper foil . . . becomes more low-profiled . . . whereby it becomes a foil having a large etching factor”), 9:1–29 & Table 2 (Wolski, disclosing 15 Dr. Randall testifies that “Kim ’761’s peak count roughness Rpc corresponds to the peak density PD of the ’706 patent.” Ex. 1003 ¶ 52. At this stage in the proceeding, this testimony is unrebutted. 38 embodiments meeting the ΔRz/Ra of claim 1, describing them as having “matte side roughnesses” that are “sufficiently small,” and as having “excellent” “high temperature elongation characteristics”), 11:37–41 (Wolski, describing comparative examples as having “large” matte side roughnesses “whereby etching factors are not good”), 12:12–27 (Wolski, teaching that “as compared with a conventional untreated copper foil, both surfaces of the untreated copper foil obtained by [Wolski’s] invention are flat” resulting in a low profile foil that has “excellent elongations at room temperature and high temperature and also high tensile strength”). The teachings in the prior art support the presently unrebutted testimony of Dr. Randall explaining why the POSA would have been motivated to modify Kim ’761’s copper foil to have the claimed TC(220) and ΔRz/Ra. Ex. 1003 ¶¶ 66–68, 71–74; Pfizer Inc., v. Sanofi Pasteur Inc., 94 F.4th 1341, 1348 (Fed. Cir. 2024) (“Where [a gap in prior art] includes a parameter not necessarily disclosed in the prior art, it is not improper to consider whether or not it would have been recognized as result-effective. If so, then the optimization of that parameter is ‘normally obvious.’”). Accordingly, we are not persuaded by Patent Owner’s argument that Petitioner failed to articulate a sufficient motivation to combine the references. To the contrary, the preliminary record presents a strong showing that the POSA would have been motivated to combine the references in the manner described in the Petition.” slip op. at 38

    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “At this stage of the proceeding, Patent Owner does not contest Petitioner’s definition of the level of skill in the art. Prelim. Resp. 4 (“For purposes of this Preliminary Response, Patent Owner applies Petitioner’s level of skill for a person of ordinary skill in the art”). Petitioner’s definition appears to be consistent with the field of the invention reflected in the prior art of record and the disclosure of the ’706 patent. Accordingly, for purposes of this Decision, we adopt Petitioner’s proposed definition of the person of ordinary skill in the art.” slip op. at 21

    Claim construction§ 103 obviousnessDiscretionary denialcites KSR · Graham
    Patents in suitUS 11,591,706
  • PTAB · Apr 25, 2025 · IPR2024-01462 · APJ Jo-Anne M Kokoski · IPR · Institution

    The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–8 were unpatentable under the asserted obviousness grounds.

    RulingsInstitution decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “experience working on the development of materials or components for electronic devices such as batteries.” Pet. 2. Petitioner further contends that “[a]dditional education, such as a graduate degree, could compensate for less work experience, and additional work experience could compensate for less formal education.” Id. Patent Owner states that, “[f]or purposes of this Preliminary Response, Patent Owner applies Petitioner’s level of skill for a person of ordinary skill in the art.” Prelim. Resp. 4. For purposes of this Decision, we adopt Petitioner’s undisputed proposed definition because it appears to be consistent with the cited prior art and the disclosure of the ’014 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))).” slip op. at 8

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their plain and ordinary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. Realtime Data LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). in this proceeding.” Pet. 3. Patent Owner contends that “[t]he Board need not construe any term in order to determine that institution should be denied.” Prelim. Resp. 4. Based on the record before us, we determine that no claim term requires express construction for purposes of this Decision. See Realtime Data, 912 F.3d at 1375.” slip op. at 8

    • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

      “For these reasons, we are not persuaded that Petitioner sufficiently establishes that a POSITA would have been motivated to modify Hanafusa in light of Dobashi with a reasonable expectation of success as Petitioner contends. Accordingly, we determine that Petitioner fails to demonstrate a reasonable likelihood of prevailing in its assertion that the subject matter of claim 1, and claims 4 and 8 that depend therefrom, would have been obvious over the combined teachings of Hanafusa and Dobashi.” slip op. at 18

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

      “Petitioner also focuses on Hanafusa’s teaching that all known methods can be used to make a rough surface low-profile, and Dobashi’s teaching that RSm can be used as an indicator for judgment of the surface, to support its contention that a POSITA would have been motivated to apply Dobashi’s RSm to further achieve Hanafusa’s purpose, without explaining how and why that would be the case. In particular, neither Petitioner nor Dr. Josefowicz adequately explain why a POSITA looking for ways to make Hanafusa’s surface roughness low-profile would look to methods to achieve as the period of waviness, RSm can also be used as an indicator for judgment of the surface.” Ex. 1005, 2:66–3:1, 6:23–26. Dobashi explains that waviness is “an indicator for determining whether the fine pattern forming performance is good or bad,” and “[t]he surface has small waviness and is smooth when RSm is large, and the surface has large waviness and is rough when RSm is small.” Id. at 3:1–3, 6:27–29. Dobashi also teaches that surface roughness Rzjis is used as a low-profile indicator. Ex. 1005, 2:66– 3:1. Dobashi, therefore, teaches that RSm is an indicator of surface waviness, which Dobashi explains is different than surface roughness. Id. at 2:66–3:3, 6:23–29. Given these teachings in Dobashi, neither Petitioner nor Dr. Josefowicz sufficiently explains how or why a POSITA would have been motivated to implement Dobashi’s RSm values to make Hanafusa’s surface roughness low-profile. See Pet. 10–12; Ex. 1003 ¶¶ 46–52.” slip op. at 14

    Claim construction§ 103 obviousnesscites Phillips · KSR
    Patents in suitUS 11,346,014
  • PTAB · Apr 23, 2025 · IPR2024-01461 · APJ Jo-Anne M Kokoski · IPR · Institution

    The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–10 were unpatentable over either asserted § 103 ground.

    RulingsInstitution decision
    • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

      “Institution of an inter partes review is authorized by statute when “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314 (2018); see also 37 C.F.R. § 42.4 (2023). For the reasons discussed below, we deny the Petition and do not institute an inter partes review.” slip op. at 2

    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “II. ANALYSIS A. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art (“POSITA”) “would have had at least an undergraduate degree in materials science, chemical engineering, electrical engineering, or related field, or equivalent knowledge, training, or experience, with at least two years of experience working on the development of materials or components for electronic devices such as batteries.” Pet. 4. Petitioner further contends that “[a]dditional education, such as a graduate degree, could compensate for less 7 We refer to the page numbers added by Petitioner to the bottom-center of the page. formal education.” Id. (citing Ex. 1003 ¶ 10). Patent Owner states that, “[f]or purposes of this Preliminary Response, Patent Owner applies Petitioner’s level of skill for a person of ordinary skill in the art.” Prelim. Resp. 4. For purposes of this Decision, we adopt Petitioner’s undisputed proposed definition because it appears to be consistent with the cited prior art and the disclosure of the ’689 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163–64 (Fed. Cir. 1985))).” slip op. at 10

    • Expert testimonyPetitioner expert discountedDecided for patent owner

      “We are not persuaded, on this record, that Petitioner adequately establishes that Khatibi discloses a CTE in the claimed range of 16 to 22 µm/(m·°C.). Petitioner’s argument that Khatibi’s reported values meet this claim limitation are based solely on Dr. Randall’s testimony that Khatibi’s measurement method would produce results that would not significantly differ from results determined using the claimed method. See Pet. 16–18 (citing Ex. 1003 ¶¶ 56–60). Dr. Randall’s testimony, however, is largely conclusory and unsupported by adequate explanation and/or objective evidence. For example, Dr. Randall does not provide adequate explanation or objective evidence to support his opinion that Khatibi’s use of a laser speckle based dilatometer instead of the claimed thermomechanical analyzer “is unlikely to significantly impact the CTE value” because “variations in equipment and a heating speed of 5° C/min would not significantly alter the results.” Ex. 1003 ¶ 58. In particular, Dr. Randall neither explains what constitutes a “significant” impact on CTE, nor provides objective evidence to support his contention that equipment variations and heating differences would not “significantly alter” the resulting measurements. And although Dr. Randall opines that “the heating rate (5°C per minute) is typical for certain devices” such as a thermomechanical analyzer or dilatometer, and “[t]ypically, these devices use temperature ramp rates between 2°C and 20°C per minutes, so the ‘5° C./min’ recited in [1d] is common and should not drastically affect the measurement results,” Dr. Randall fails to point us to any evidence showing that these temperatures are “typical” or that the claimed heating rate is “common.” Id. ¶ 59 (emphases added). to little weight. See 37 C.F.R. § 42.65(a) (“Expert testimony that does not disclose the underlying facts or data on which the opinion is based is entitled to little or no weight.”); Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 12 at 5 (PTAB Feb. 10, 2023) (finding that “the Board was correct in giving little weight to Petitioner’s expert because the expert declaration merely offered conclusory assertions without underlying factual support”); Upjohn Co. v. Mova Pharm. Corp., 225 F.3d 1306, 1311 (Fed. Cir. 2000) (“Lack of factual support for expert opinion to factual determinations, however, may render the testimony of little probative value in a validity determination.” (quoting Ashland Oil, Inc. v. Delta Resins and Refractories, Inc., 776 F.2d 281, 294 (Fed. Cir. 1985))); see also In re Ethicon, Inc., 844 F.3d 1344, 1348, 1352 (Fed. Cir. 2017) (concluding that the Board properly gave “little weight” to conclusory expert testimony of objective indicia). Because Petitioner offers Dr. Randall’s testimony to supply a limitation missing from the prior art, namely, the CTE measurement method, and we give Dr. Randall’s unsupported and conclusory testimony little weight, we are not persuaded that Petitioner establishes a reasonable likelihood of showing that Khatibi discloses limitation [1d].” slip op. at 17

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

      “second surfaces of the electrolytic copper foil ranges from 3 to 92.” Ex. 1001, 13:62–63. Petitioner contends that “Kim teaches that the electrolytic copper foil (e.g., untreated or treated copper foil) having Rz less than 2 µm is advantageous toward battery efficiency and performance,” and, similarly, Griesi describes the use of untreated electrolytic copper foil with an Rz value less than 2 µm in printed circuit boards that are compatible with secondary batteries. Pet. 58–59 (citing Ex. 1012, claim 2, ¶¶ 13, 25, 27; Ex. 1003 ¶ 157). In particular, Petitioner notes that Griesi’s Figure 3.16 describes an “Rz value of 1.2 µm.” Id. at 59 (citing Ex. 1015, 53–54; Ex. 1003 ¶ 158). Petitioner asserts that “Dr. Randall explains that a POSITA would have also recognized another surface roughness-related parameter, Rpc, in Griesi as a potentially useful parameter that can be optimized to further enhance uniformity or generally improve Kim’s copper foil surface, for example, to prevent wrinkles or achieve other advantageous effects.” Id. (citing Ex. 1003 ¶ 159). Although Dr. Randall demonstrates that Griesi’s Pc (or Rpc) value is 19.2 over a 4 mm sampling length (Ex. 1003 ¶ 155), Petitioner does not contend that Griesi addresses this value, or indicates any benefit that might be derived from its use. Instead, Griesi’s Pc value appears to be an incidental finding, which is not discussed or analyzed in the reference. See incidental, unexamined finding would lead a POSITA to import Griesi’s Pc value into Kim’s copper foil, absent a hindsight desire to reconstruct the claimed invention. As such, Petitioner’s arguments with respect to Kim and Griesi are not persuasive. See Cheese Sys. Inc. v. Tetra Pak Cheese and Powder Sys., Inc., 725 F.3d 1341, 1352 (Fed. Cir. 2013) (“Obviousness cannot be based on the hindsight combination of components selectively culled from the prior art to fit the parameters of the patented invention.” (internal quotations marks omitted)). Thus, we are not persuaded, on this record, that the combined disclosures of Kim and Griesi teach all of the elements of limitation [1g].” slip op. at 23

    § 103 obviousnesscites Phillips
    Patents in suitUS 10,811,689
  • PTAB · Apr 22, 2025 · IPR2024-01460 · APJ Jon B Tornquist · IPR · Institution

    The Board denied institution of review of claims 1–11 because the Fintiv factors, including the early trial date and close merits case, favored discretionary denial.

    RulingsInstitution decision
    • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied fintivInstitution denied

      “whether to institute an inter partes review. Applying the standard set forth in 35 U.S.C. § 314(a), we may not institute an inter partes review unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Institution of inter partes review, however, is discretionary. See Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1367 (Fed. Cir. 2016) (“[T]he PTO is permitted, but never compelled, to institute an IPR proceeding.”). For the reasons stated below, we exercise our discretion not to institute an inter partes review. A. Real Parties-in-Interest” slip op. at 2

    • PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Institution denied fintivDenied

      “Board’s projected statutory deadline to issue a final written decision. Fintiv, Paper 11 at 9. “If the court’s trial date is at or around the same time as the projected statutory deadline . . . the decision whether to institute will likely implicate other factors.” Id. Conversely, “[i]f the court’s trial date is earlier than the projected statutory deadline,” this has generally weighed “in favor of exercising authority to deny institution.” Id.” slip op. at 15

    • PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsNot reached

      “Petition under 35 U.S.C. § 325(d) because the same or substantially the same art and arguments were before the Examiner during prosecution and Petitioner’s has not demonstrated that the Examiner erred in a material manner when allowing the claims. Pet. 17–18. Given our discretionary denial of the Petition in view of the Fintiv factors, we do not address Petitioner’s further arguments with respect to § 325(d).” slip op. at 32

    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “Patent Owner applies Petitioner’s recited level of ordinary skill in the art for purposes of its Preliminary Response. Prelim. Resp. 4. Upon review of the parties’ arguments and the prior art of record, we adopt Petitioner’s unopposed definition of the ordinarily skilled artisan for purposes of this decision as it appears consistent with the disclosures of the ’090 patent and the prior art of record. C. Claim Construction” slip op. at 9

    § 103 obviousnessDiscretionary denialcites Phillips · KSR · Graham
    Patents in suitUS 10,480,090

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.