- Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Power2b Inc.All claims unpatentablePTAB · Oct 27, 2025 · IPR2021-01257 · APJ Sheila F Mcshane · IPR · Remand
On remand, the Board held claims 1, 2, 6–8, 13, 14, 16, 18, 19, 21–23, 26, and 30 unpatentable as obvious over the stated Newton and Reime grounds.
RulingsRemand decision- RemandOther
“On February 12, 2025, the Federal Circuit issued an opinion vacating and remanding our Final Written Decision based on the determination of the construction of the impingement term recited in the ’170 patent. Appeal Dec. 9. More specifically, the Federal Circuit found that the Board’s construction was too limited. Id. at 8–9. The Federal Circuit found that As properly construed, in the context of the challenged claims, ‘impingement of an electromagnetic radiation spot’ must include ‘reflected, projected, and interrupted or blocked radiation.’ In other words, when a finger or non-light-emitting stylus interrupts or blocks a beam of electromagnetic radiation, and does so over a certain spot on the surface of a device, the claim limitation is satisfied. Contrary to the Board’s construction, as articulated by Power2B on appeal, the ‘electromagnetic radiation spot on . . . [the] interactive surface element’ does not ‘require[that] radiation imping[e] on the surface element’ and, hence, does not exclude interrupting or blocking radiation. Appeal Dec. 9 (citations omitted).” slip op. at 3
- Skill levelSkill level petitioner adoptedDecided for petitioner
“better definition for purposes of this proceeding, except we again decline to adopt “at least” because that language is vague and open-ended. With respect to the educational qualifications, Petitioner’s proposed qualifications are that one of ordinary skill in the art would have had a bachelor’s degree in electrical engineering, computer engineering, computer science, or a related field. Pet. 8 (citing Ex. 1002 ¶ 41) (emphasis added). The claims are directed to an interactive assembly comprising at least one input sensor to provide an output indicative of an impingement of an electromagnetic radiation spot. Individuals with bachelor’s degrees in physics would be knowledgeable in researching, designing, or developing such assemblies and would be able to comprehend and evaluate the teachings of the prior art. Accordingly, Petitioner’s proposed qualifications are overly narrow in not including individuals with bachelor’s degrees in physics. With respect to work experience, a person having two years of experience would be able to comprehend and evaluate the teachings of the prior art, consistent with Petitioner’s proposal.” slip op. at 10
- Prior constructionPrior construction adoptedDecided for petitioner
“impingement of an electromagnetic radiation spot” includes “reflected, projected, and interrupted or blocked radiation” and “when a finger or nonlight-emitting stylus interrupts or blocks a beam of electromagnetic radiation, and does so over a certain spot on the surface of a device, the claim limitation is satisfied.” Appeal Dec. 9. Under this construction, we determine that Petitioner has demonstrated that Newton teaches this claim limitation. More specifically, Newton discloses that a user touch interrupts beams of electromagnetic radiation over certain spots over a surface, which provides an output. See Ex. 1012 ¶¶ 13, 25; see also Ex. 1002 ¶ 72. slip op. at 18
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“We agree with Petitioner that the claims do not require a detector assembly to be physically separate from the interactive surface element. The language of the claims does not require this, nor is there any disclosure in the ’170 patent specification that indicates that separation of these elements is required. Patent Owner refers to certain embodiments that have separate structures, but we decline to import this as a requirement to the claim term. We also agree with Petitioner that the ’170 patent broadly views what it means to be “at an edge,” and that can include being behind, about, or along an edge within its scope. See Ex. 1001, 55:63–56:2.” slip op. at 24
Patent outcomesUS 9,317,170 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,317,170 - Western Digital Technologies, Inc. v. Godo Kaisha IP Bridge 1Institution deniedPTAB · Oct 8, 2025 · IPR2025-00701 · APJ Sheila F Mcshane · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–14 were obvious over the asserted combinations.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsDenied
“Institution of an inter partes review is authorized by statute when “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). Upon consideration of the Petition, the Preliminary Response, and the evidence of record, we determine that Petitioner has not established a reasonable likelihood of prevailing with respect to the unpatentability of at least one claim of the ’138 patent. Accordingly, for the reasons that follow, we decline to institute an inter partes review of claims 1–14 of the ’138 patent.” slip op. at 2
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner states that “the claim terms should be given their plain and ordinary meaning and no claim construction is necessary to find the claims unpatentable.” Pet. 6. Patent Owner does not address claim construction. See generally Prelim. Resp. We determine that we need not expressly construe any claim terms to resolve the parties’ disputes on the current record. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 8
- Skill levelSkill level petitioner adoptedOther
“a Ph.D. or master’s degree in electrical engineering, physics, materials science, or a related field, and at least one year or four years, respectively, of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent. Pet. 8 (citing Ex. 1024 ¶¶ 25–29). Petitioner contends that less work experience can be compensated for by a higher level of experience and vice versa. Id. (citing Ex. 1024 ¶ 25). Petitioner also asserts that the proposed level of skill would be the same under any of the United States, Japanese, or PCT application dates. Id. at 8–9 (citing Ex. 1024 ¶¶ 24–25). Patent Owner does not challenge Petitioner’s proposed level of qualifications for one of ordinary skill in the art. Prelim. Resp. 20. At this stage of the proceeding, we adopt Petitioner’s assessment of the level of skill in the art, which is consistent with the ’138 patent and the asserted prior art of record.” slip op. at 7
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“As discussed above, Petitioner relies upon Parkin, and its layers 115 and 175, as the claimed first and second ferromagnetic material layers, respectively. See Pet. 10, 16. Petitioner admits that these layers are 8 In the Petition, Petitioner refers to the lower electrode “ferromagnetic layer 110’ as discussed in Claim 1[a]” in the discussion of limitation 1[d]. Pet. 18. Petitioner’s reference to “layer 110’” appears to be in error because the Petition’s discussion for limitation 1[a] refers to layer 115 of Parkin, as does Dr. Bokor’s testimony related to limitations 1[a] and 1[d]. Pet. 10; Ex. 1024 ¶¶ 109, 136. amorphous, but contends that, as Parkin discloses, these layers may be annealed. Id. at 17. Petitioner, however, refers to Parkin’s disclosure that only “a portion of the storage layer 175” is crystallized after annealing. Id. at 17–18 (citing Ex. 1062, 18:51–55) (emphasis added). Petitioner also relies upon Parkin’s “thin crystalline ferromagnetic layer” that is crystallized to teach limitation 1[d]. Id. at 18 (citing Ex. 1062, 18:55–59; Ex. 1024 ¶¶ 131–132) (emphasis added). Dr. Bokor additionally testifies that it is “Parkin’s ‘thin crystalline ferromagnetic layer’ of CoFeB” that meets the “entirely crystallized” requirement of limitation 1[d]. Ex. 1024 ¶ 132. Parkin, however, states that a thin crystalline ferromagnetic layer is formed, but “the bulk of storage layer 175 remains amorphous.” Ex. 1062, 18:55–60 (emphasis added). Petitioner fails to reconcile how its assertions that the first and second ferromagnetic layers, which are mapped to the totality of layers of 115 and 175, meet the limitation that the first and second ferromagnetic layers are each “entirely crystallized” when Petitioner relies only a thin layer, that is, a portion, of the 115 and 175 layers for the teaching that the respective layers are entirely crystallized. Put another way, Petitioner’s mapping is inconsistent: Petitioner relies upon the full depth of certain “layers” of Parkin for the teaching of the ferromagnetic layers, but then only relies upon thin portion of that depth for the assertion that the “layers” are entirely crystallized.” slip op. at 16
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,367,138 - PTAB · Sep 19, 2025 · PGR2025-00025 · APJ Kimberly Mcgraw · PGR · Institution
The Board instituted PGR on claims 1–19 and all asserted grounds, finding it more likely than not that claim 1 is anticipated by the Gatorade Label.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“if “the information presented in the petition . . . demonstrate[s] that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” Post-grant review is available for patents that issue from applications that at one point contained at least one claim with an effective filing date on or after March 16, 2013. See Leahy-Smith America Invents Act, Pub. L. No. 112-29, 125 Stat. 284 (2011) (“AIA”), §§ 3(n)(1), 6(f)(2)(A). After considering the briefing and the evidence of record, for the reasons set forth below, we determine that Petitioner has shown that the ’422 Patent is eligible for post-grant review and has shown it is more likely than not that at least one challenged claim of the ’422 Patent is unpatentable under § 324(a). Accordingly, we institute a post-grant review of the challenged claims of the ’422 Patent.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art “would possess at least (1) a Bachelor’s degree in chemistry or a related field, with (2) five years of experience in material identification and characterization using multiple analytical methods and field sampling, or equivalent research or professional experience.” Pet. 12 (citing Ex. 1014 ¶ 24). Patent Owner does not dispute Petitioner’s definition for one of ordinary skill in the art nor provide a proposed definition of its own. See generally Prelim. Resp. For the purposes of this Decision, we adopt Petitioner’s undisputed proposal regarding the level of one of ordinary skill in the art.” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Prosecution history disclaimer / disavowalDisclaimer foundDecided for patent owner
“336. The applicant explained that not all combinations of shrink films and light blocking materials are recyclable. Id. at 335. The applicant explained that films can be compatible with PET recycling in two ways, (1) the film can float in water and be separated from PET that sinks in water or (2) the PET films crystallize and “can be recovered with the PET stream.” Id. at 336 (citing “A Resource Document by the Association of Plastic Recyclers (APR)”) (found at Ex. 1002, 323–332) (emphasis omitted). The applicant explained that “removing the label before or during the recycling process is not evidence of the recyclability of the label” and that “[r]emoving the label during the recycling process is not equivalent to actually recycling the label.” Id. at 335. As such, a POSITA reading the prosecution history would understand that a label is not recyclable with a PET container, as recited by the independent claims, by removing the label from the PET recycle stream before or during the recycling process.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownOther
“To determine how a person skill in the art would determine if a shrink label is “recyclable” as recited in the independent claims, we look to how the Specification of the ’422 Patent describes or defines recyclable shrink labels. For example, the ’422 Patent states that PET shrink films are generally considered recyclable if no inks are retained on the film after a caustic wash cycle typically used in PET reclaiming processes. Ex. 1001, 6:61–65. The ’422 Patent further states that labels are fully recyclable if the polymers used are clear, preferably clear PET, and the labels include inks that can be washed off in a “typical PET recycling wash (caustic wash).” Id. at 11:44– 49; see also id. at 11:49–54 (describing embodiments in which the labels are free or substantially free of inks that cannot be washed off in a caustic wash or where the labels are free or substantially free of color plastics that cannot be recycled). The ’422 Patent further discusses “industry standards” for determining whether various embodiments of shrink labels are recyclable. See, e.g., id. at 11:29–53. For example, the Specification states that the “Association for Plastic Recyclers (APR) Critical Guidance Protocol for Clear PET Articles with Labels and Closures (PET-CG-02)” (Ex. 1005) can certify that a film is fully recyclable with a container or bottle. Id. at 11:34– 38. Additionally, the Specification states that labels “are recyclable according to the Evaluation of the Near Infrared (NIR) Sorting Potential of a Whole Plastic Article (SORT-B-01)” (Ex. 1010) and/or the “Evaluation of Sorting Potential for Plastic Articles Utilizing Metal, Metalized, or Metallic Printed Components (SORT-B-03)” (Ex. 1011). Ex. 1001, 11:39–44. The ’422 Patent further states that embodiments of the labels “are fully recyclable. For example, the labels may include inks that can be washed off in a typical PET recycling wash (caustic wash) and the polymers” are preferably clear PET. Id. at 11:44–48. The ’422 Patent thus provides various descriptions or standards to determine the recyclability of shrink labels. For the purposes of addressing the anticipation and obviousness grounds, we determine that any of these standards can be used to determine if a shrink label is “recyclable.” We note that our construction is preliminary and is based on the present record. We invite the parties to further the address the construction of “wherein the recyclable shrink label is recyclable with a PET container” during trial.” slip op. at 12
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · NautilusPatents in suitUS 11,961,422 - Champion Laboratories, Inc. / First Brands Group, LLC v. Hengst SENo claims unpatentablePTAB · Sep 8, 2025 · IPR2024-00603 · APJ Sheldon M Mcgee · IPR · Final written decision
Claims 1, 3, 5, 8–11, 15–17, 19, 23–25, and 28–30 were not shown unpatentable over Yokoyama, Yokoyama and Cline, or Honermann and Cline.
RulingsFinal written decision- Skill levelSkill level board ownDecided for petitioner
“On this record, we determine that the level of ordinary skill is reflected in the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (specific findings on the ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163–64 (Fed. Cir. 1985))). Because the level of ordinary skill in the art is not in dispute, and because the parties’ definition is consistent with the disclosures in the ʼ203 patent, the prior art, and the declaration testimony of Mr. Nranian and Dr. Basirat, we view the prior art and arguments through this lens when determining whether the claims are unpatentable as obvious over the prior art.5 See Graham, 383 U.S. at 17 (identifying “the level of ordinary skill in the pertinent art” as an underlying factual inquiry to be resolved in deciding obviousness, which is a question of law).” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“Although the parties spend significant portions of their briefing discussing the term “eccentric” and how it applies to certain figures from the ʼ203 patent and the relied-upon prior art, we determine that it is not necessary to expressly construe the term “eccentric” beyond the parties’ agreed-upon definition. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Ltd., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). Rather, we adopt Patent Owner’s proffered definition because it is consistent with the intrinsic record and because it is not in dispute. Specifically, Patent Owner asserts that the plain meaning of the term “eccentric” is defined as “located elsewhere than at the geometric center; also: having the axis or support so located.” PO Resp. 18–19 (citing the Merriam-Webster online dictionary definition of the term “eccentric” for support). Petitioner agrees with this definition. Pet. 35 (asserting that certain prior art elements are eccentric “because they are not located at the center of the filter insert or housing”); Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”); see also Ex. 2017 ¶ 33 (Dr. Basirat testifying that “[a] POSITA would understand that ‘eccentric’ in the context of [the] ʼ203 patent, means that central axis is located elsewhere than at the geometric center [and] not placed centrally or not having its axis or other part placed centrally”). The parties’ definition of “eccentric” is also consistent with the usage of the term in the ʼ203 patent. Ex. 1001, 10:23–31; Fig. 17.” slip op. at 14
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“Rather, we adopt Patent Owner’s proffered definition because it is consistent with the intrinsic record and because it is not in dispute. Specifically, Patent Owner asserts that the plain meaning of the term “eccentric” is defined as “located elsewhere than at the geometric center; also: having the axis or support so located.” PO Resp. 18–19 (citing the Merriam-Webster online dictionary definition of the term “eccentric” for support). Petitioner agrees with this definition. Pet. 35 (asserting that certain prior art elements are eccentric “because they are not located at the center of the filter insert or housing”); Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”); see also Ex. 2017 ¶ 33 (Dr. Basirat testifying that “[a] POSITA would understand that ‘eccentric’ in the context of [the] ʼ203 patent, means that central axis is located elsewhere than at the geometric center [and] not placed centrally or not having its axis or other part placed centrally”). The parties’ definition of “eccentric” is also consistent with the usage of the term in the ʼ203 patent. Ex. 1001, 10:23–31; Fig. 17.” slip op. at 14
- Expert testimonyPetitioner expert discountedDecided for patent owner
“(opining that “Patent Owner’s construction of ‘having an axis no located in a geometric center’ is too narrow”). Mr. Nranian’s Declaration testimony in this respect is not persuasive for several reasons. First, it is internally inconsistent. Compare Ex. 1016 ¶ 3 (criticizing the “axis” language in Patent Owner’s definition), with id. ¶¶ 9, 11 (relying on that very language to support an argument). Also, Mr. Nranian’s proposed definition of “eccentric” to merely mean “not located at the center” begs the question of what, precisely, is “the center”? Mr. Nranian does not persuasively explain how far a person of ordinary skill in the art would understand she could travel from the exact center point of an object and still be in “the center” of that object. See Tr. 10:13–19 (Judge McGee asking whether the center is “a miniscule point in the middle of [the] disc”); see also id. at 10:25–12:26 (Judge Weatherly highlighting the significant ambiguity in referring to something as in “the center”). Also, Mr. Nranian’s opinion is inconsistent with how the ʼ203 patent compares something that is “central,” i.e., “at the center,” and something that is “eccentrically” located. Ex. 1001, 7:13–14 (describing pipe nozzle 15 as “central”); id. at 8:53–56 (describing a “through hole” as “located in the center of the front panel 22” depicted in Figures 7 and 8); id. at 10:23–31 (describing return 12 as “in the center” and outlet 13 as “eccentrically thereto” in Figure 17). Patent Owner’s colorized and annotated Figure 7 is reproduced below: Patent Owner’s colorized and annotated version of Figure 7 of the ʼ203 patent illustrates “central pipe nozzle 15” in yellow passing through the “through hole” located in “the center” of front panel 22. PO Resp. 20. Significantly, pipe nozzle 15 and the through hole in panel 22 are both described as “central” and in “the center” but must have different diameters; otherwise, “central pipe nozzle 15” would not be capable of traveling through “through hole 22.” Ex. 1001, Fig. 7. Thus, the ʼ203 patent intrinsically bases whether an element is “central” or “in the center” on whether its axis is located at the geometric center. This is also illustrated in Figure 17 of the ʼ203 patent, reproduced below: Figure 17 of the ʼ203 patent illustrates filter housing 10 with return 12 “in the center . . . and, eccentrically thereto, the outlet 13 with the seat 14 for the blocking element 24.” Ex. 1001, 10:23–30. Finally, Mr. Nranian’s narrow interpretation of “eccentric”––which excludes the “having the axis or support so located” in the geometric center language––is at odds with the arguments it was proffered to support. Cf. Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”).” slip op. at 29
Patent outcomesUS 9,023,203 not shown unpatentableClaim construction§ 103 obviousnesscites GrahamPatents in suitUS 9,023,203 - Microchip Technology Inc. v. Aptiv Technologies AGSome claims unpatentablePTAB · Aug 18, 2025 · IPR2024-00495 · APJ Terrence W Mcmillin · IPR · Final written decision
Claims 13 and 14 are unpatentable as obvious over Chang and Chang II; claims 18–20 were not shown unpatentable.
RulingsFinal written decision- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“Accordingly, in the context of Chang, a POSITA would have been motivated to implement dual-role ports by including a switch (e.g., multiplexer or crossbar) that connects the dual-role port(s) directly to the hub’s upstream port (when the consumer product is configured as a device, i.e., path 48) or to the hub through the bridge (when the consumer product is configured as host, i.e., path 54. Id. at 40–41 (citing Ex. 1013 ¶¶ 182–187). Petitioner’s argument that a skilled artisan would have been motivated to modify Chang to include switching functionality as taught by Chang II and supported by other substantial evidence appears well-reasoned and well-supported. Petitioner argues that “[a] POSITA would have been further motivated to improve Chang in view of Chang II, because Chang II expressly states its relevance to USB hubs.” Pet. 41 (citing Ex. 1013 ¶ 181; Ex. 1015 ¶¶ 27, 40). And, Petitioner argues that “while Chang discloses little regarding its bridge (EX1014, [0020]), Chang II details various aspects of its bridge (EX1015, Title, Figs. 1-2 and 5).” Id. In support of this argument, the Petition provides: Importantly, Chang II further details exemplary switching for either a host- or device-product: “the main feature is the provision of two different transmission paths, so that by automatically detecting the type of device connected (host or slave) the present invention can switch to the proper transmission path.” EX1015, [0021]. In other words, Chang II describes “switch[ing]” to connect a “bridge” transmission path (when the product is host) or “bypass” path (when the product is device). Id., Figs. 1, 5, [0013]. And Chang II further discloses “detection unit 134” for detecting whether the consumer product is host or device. Id., [0038]. Id. (bracketed material in original, footnote omitted). Petitioner contends that “[a]ccordingly, a POSITA would have been motivated, with a high expectation of success, to route the dual-role ports (and products attached thereto) to the appropriate path using a switch.” Id. at 41–42. We determine that this contention is well-reasoned and well-supported. Patent Owner challenges on several grounds the showing regarding” slip op. at 51
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“Id. As discussed above, we determine that any alleged commercial success secondary consideration evidence has not been established to have a nexus to the claimed invention. Accordingly, we consider the evidence of commercial success but accord it little weight in our overall obviousness determination.” slip op. at 60
- Obviousness (§103) › Objective indicia / secondary considerationsNot shown unpatentableDecided for petitioner
“Id. As discussed above, we determine that any alleged commercial success secondary consideration evidence has not been established to have a nexus to the claimed invention. Accordingly, we consider the evidence of commercial success but accord it little weight in our overall obviousness determination.” slip op. at 60
- Strike new argumentDenied
“because the Reply improperly presents new theories of unpatentability with belated supporting evidence that could have been present in the Petition itself.” Paper 37, 1. Patent Owner contends that, in response to an argument Patent Owner made in the Response that “Petitioner’s proposed prior art combination features a structural flaw” (id. at 2), Petitioner’s Reply improperly presents a new argument not found in the Petition (id. at 3–6). As discussed supra (section II.E.3.a.), we determine that, because Patent Owner’s structural flaw argument fails, we do not reach the alleged new argument and evidence that Patent Owner seeks to strike. Accordingly, this motion is moot.” slip op. at 77
Patent outcomesUS 9,619,420 mixed§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 9,619,420 - Microchip Technology Inc. v. Aptiv Technologies AGAll claims unpatentablePTAB · Jul 30, 2025 · IPR2024-00230 · APJ John D Hamann · IPR · Final written decision
Claim 1 is unpatentable as obvious over Chang and Chang II; the Board did not reach the Chang, Chang II, and Chutorash ground.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“We agree with Patent Owner and find that “computer network protocols” is correct in light of the ’072 patent’s disclosure and claim 1. In particular, the ’072 patent teaches that it “generally relates to [USB] connectivity between, for example, mobile consumer devices and vehicle electronic systems.” Ex. 1009, 1:21–23. And the ’072 patent’s teachings focus on common network components (e.g., hub, bridge, ports) and common networking concepts (e.g., master/slave network architecture and bridging) which are used in the USB context, rather than detailed aspects (e.g., signal timing, signal levels, power levels) of the USB protocol. See generally Ex. 1009; see also Ex. 1084, 103:21–104:2, 104:24–105:4; Pet. Reply 4 (citing Ex. 1084,7 100:17–101:12 (acknowledging that Dr. Houh testifies that one of ordinary skill in the art “would know basic USB concepts like bridging, master/slave architecture, etc.”), 102:3–8, 103:21– 104:2, 104:24–105:4). Likewise, claim 1 repeatedly recites “USB,” but does so to identify that all of the components of the data system (i.e., USB ports, USB hub, USB bridge, USB host, USB multiplexing switches) employ the USB protocol. Ex. 1009, 9:15–10:18. As the ’072 patent teaches, “USB 7 Houh Deposition Tr. (2024/12/18, Day 1). technology . . . [wa]s commonly available, familiar to the end user, cost effective and ubiquitous.” Id. at 1:35–37. Thus, although the ’072 patent is taught in the USB context, “computer network protocols” concepts are the focus. For these same reasons, we find unavailing Petitioner’s argument that one of ordinary skill in the art “would have been well-versed in USB standards (including the USB 2.0 and 3.0 Specifications and the OTG Supplement) and the design/deployment of USB hosts, USB devices, and USB hubs, including suitable environments for USB systems.” Pet. 26.” slip op. at 11
- Expert testimonyPetitioner expert discountedOther
“Lastly, we give little weight to Mr. Welch’s testimony regarding the level of one of ordinary skill as he does not indicate what precisely constitutes the basis of his testimony on this issue. See Ex. 1013 ¶ 47.” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Here, Petitioner argues that “embedded USB host” means “USB host physically embedded in a vehicle.” See Pet. 27–28. “Patent Owner does not contend that any claim construction is required.” PO Resp. 5. We agree with Patent Owner that we do not need to construe any term to resolve the disputes between the parties. See, e.g., Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’”). And we afford the claim terms their plain and ordinary meaning.” slip op. at 13
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“that the asserted objective evidence is tied to a specific product that ‘embodies the claimed features, and is coextensive with them.’” Id. (quoting Brown & Williamson Tobacco Corp. v. Philip Morris, Inc., 229 F.3d 1120, 1130 (Fed. Cir. 2000)). In other words, “[a] presumption of nexus requires both that the product embodies the invention and is coextensive with it.” Id. at 1211 (citing Brown, 229 F.3d at 1130). Patent Owner fails to show either of these requirements. First, Patent Owner argues that in his Supplemental Declaration, Dr. Houh “provides on a per limitation basis how [Patent Owner]’s dual role hub meets all limitations of claim 1.” PO Resp. 73 (citing Ex. 2019 ¶ 136). Notably, Patent Owner cites to a single paragraph in this declaration, without providing any specific arguments in its Response that its product practices claim 1. Id. Rather, Patent Owner incorporates its arguments by reference, which is not permitted. See 37 C.F.R. § 42.6(a)(3) (“Arguments must not be incorporated by reference from one document into another document.”). Thus, we do not consider these arguments, and we are not persuaded that Patent Owner’s product practices claim 1. Consolidated Trial Practice Guide November 2019,8 35–36 (citing Cisco Systems, Inc. v. C-Cation Techs., LLC, IPR2014-00454, Paper 12 (PTAB Aug. 29, 2014) (informative)) (“[P]arties that incorporate expert testimony by reference in their petitions . . . without providing explanation of such testimony risk having the testimony not considered by the Board.”).” slip op. at 16
Patent outcomesUS 11,176,072 unpatentableClaim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,176,072 - PTAB · Jun 11, 2025 · IPR2025-00115 · APJ Annette R Reimers · IPR · Institution
Instituted review of claims 1–4, 10, 11, 14, 15, 17, 21, 22, 24, 26, 28–30, 32, 33, and 35 on all asserted grounds, based on a reasonable likelihood of prevailing.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“4. Determination as to a Reasonable Likelihood of Prevailing Upon consideration of the arguments and evidence of record, we conclude, for the reasons provided above, that the information presented in the Petition demonstrates a reasonable likelihood that Petitioner would prevail in showing the unpatentability of claims 1–4, 10, 11, 14, 15, 17, 21, and Wampler.” slip op. at 41
- BurdenDecided for patent owner
“With respect to Patent Owner’s assertions about word count limits, the Patent Trial and Appeal Board Consolidated Trial Practice Guide November 2019 (“Consolidated TPG”) states that “deleting spacing between words, or using excessive acronyms or abbreviations for word phrases, in order to circumvent the rules on word count, may lead to a party’s brief not being considered.” Consolidated TPG, 40 (citing Pi-Net Int’l, Inc. v. JPMorgan Chase & Co., 600 F. App’x 774 (Fed. Cir. 2015)). As the basis for denying the Petition, Patent Owner alleges “undue prejudice.” Prelim. Resp. 76. Patent Owner, however, did not raise with the Board, prior to filing its Preliminary Response, any concern with the manner in which Petitioner formatted its Petition. As a result, Patent Owner did not avail itself of the opportunity to seek relief to address any alleged undue prejudice short of denying the Petition through, for example, an increase in the word count for its own brief. See 37 C.F.R. § 42.24(a)(2). Under the circumstances alleged improper formatting.8” slip op. at 12
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends a person of ordinary skill in the art at the time of the invention “would have at least a bachelor’s degree in engineering; knowledge and experience in human circulatory system anatomy and physiology; and at least five years’ experience designing and developing implantable medical devices.” Pet. 6 (citing Ex. 1003 ¶ 18). At this stage of the proceeding, Patent Owner does not contest Petitioner’s proposed level of ordinary skill in the art. See Prelim. Resp. 1–2. We find, for purposes of the appropriate level of skill at the time of the claimed invention and that the level of skill reflected in these references and in the ’517 patent is consistent with the definition of a person of ordinary skill in the art proposed by Petitioner. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 22
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“In sum, Petitioner maintains a narrower construction of “magneto coupling” is correct, and alleges grounds of unpatentability based on both its narrower proposed construction (a construction encompassed by the broader construction), as well as based on the broader construction that Patent Owner does not dispute. We, therefore, find no merit to Patent Owner’s argument that Petitioner’s contention “contradicts itself” or fails to present a “prima facie obviousness position.” See Prelim. Resp. 3. Patent Owner does not dispute the broader construction applied by Petitioner, which encompasses the narrower construction Petitioner proposes. For purposes of this Decision, we apply the broader construction of “magneto coupling,” which encompasses generating a rotating field either by rotating magnets or by an electromagnet / stator.” slip op. at 26
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,674,517 - PTAB · Jun 11, 2025 · IPR2025-00116 · APJ John D Hamann · IPR · Institution
The Board instituted inter partes review on all challenged claims and all asserted grounds, finding a reasonable likelihood that Abbott would prove at least one claim unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2024); see 37 C.F.R. § 42.108 (2024). Upon consideration of the papers, we conclude that the information presented shows that there is a reasonable likelihood that Petitioner would prevail in establishing the unpatentability of at least one challenged claim of the ’077 patent.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“least a bachelor’s degree in engineering; knowledge and experience in human circulatory system anatomy and physiology; and at least five years’ experience designing and developing implantable medical devices.” Pet. 6 (citing Ex. 1003 ¶ 18). At this stage, “Patent Owner takes no position regarding the appropriate level of skill for a person of ordinary skill in the art.” Prelim. Resp. 1. For purposes of this Decision, we adopt Petitioner’s definition of the level of skill for one of ordinary skill in the art. Pet. 6. We view this definition for the level of ordinary skill as consistent with the ’077 patent and the asserted prior art, and we apply it in our analysis below.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner
“axially adjacent.” In particular, Petitioner argues in connection with mapping cited art to challenged claims for the Wampler and Akamatsu asserted grounds that “a magnetic element sealed within a rotor is . . . ‘axially adjacent.’” Pet. 20 n.6. Petitioner fails to point to any intrinsic evidence to support this construction. Rather, Petitioner alleges that Patent Owner took this position in the parallel litigation in a chart mapping claim 1 to accused products. Id. (citing Ex. 1019,6 5–7). Petitioner does not explain how Patent Owner’s chart supports Petitioner’s construction here. See id. at 6 Petitioner identifies this exhibit as “Exhibit 13 of Complaint, dated November 27, 2023,” which comprises a claim chart mapping accused products to claim 1. when “a magnetic element [is] sealed within a rotor,” it necessarily means being “axially adjacent,” as Petitioner alleges. See Ex. 1019. Rather, we agree with Patent Owner that this chart instead labels product components that are adjacent to one another as measured along a central axis. Prelim. Resp. 21 (citing Ex. 1019, 6–7). In addition, we agree with Patent Owner that “[t]his [mapping] is in accordance with the plain and ordinary meaning of the claim terms and does not suggest that any component ‘sealed within’ another component would categorically be axially adjacent thereto.” Id. We note that Petitioner applies the plain and ordinary meaning of “axially adjacent” for other asserted grounds, arguing that components which are adjacent to one another along a central axis are “axially adjacent.” E.g., Pet. 55–57. Accordingly, we find, for purposes of this Decision, that the plain and ordinary meaning of “axially adjacent” is being adjacent to one another as measured along a central axis, and does not mean a magnetic element sealed within a rotor. Id. at 20. slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“would have found it obvious to include Wampler’s “techniques related to its axially aligned inflow tube” in the HeartMateIII device taught by Bourque. Pet. 81–88. Petitioner argues that Wampler teaches an arrangement for which “[g]ood anatomic compatibility is possible . . . fitting well between the apex of the heart and the adjacent diaphragm.” Id. at 83 (quoting Ex. 1008 ¶ 76) (alterations in original). Petitioner reasons that applying Wampler’s arrangement to Bourque combines old elements performing known functions yielding expected results. Id. at 83–84. According to Petitioner, a person of ordinary skill in the art would have known from Wampler that an axial inflow, as taught by Wampler, would have improved blood flow for the device of Bourque by eliminating the flow restrictive elbow in Bourque. Id. at 84 (citing Ex. 1003 ¶¶ 648–649; Ex. 1007, 2; Ex. 1008 ¶¶ 75–76). Petitioner contends that Bourque recognized certain components, including inflow components, were the cause of clinical troubles, and that Wampler “taught how to eliminate these components that caused clinical troubles–using the inlet to also ‘serve[] as the inflow canula.’” Id. at 85–86 (citing Ex. 1003 ¶¶ 741–747; Ex. 1007, 1, 5; Ex. 1008 ¶¶ 75–76). Petitioner also argues that a person of ordinary skill in the art would have understood Wampler’s arrangement would have reduced “rates of infection” by avoiding placement of the pump in a preperitoneal pocket person of ordinary skill in the art “would have adhered to the express teachings of [Wampler], which focused on ‘[g]ood anatomic compatibility’ so that the device ‘fit[s] well between the apex of the heart and the adjacent diaphragm,’ eliminating the need for a peritoneal pocket dissection associated with increased rates of infection.” Id. at 86–87 (citing Ex. 1003 ¶¶ 651–654; Ex. 1008 ¶ 76) (second and third alterations in original). Petitioner reasons that a person of ordinary skill in the art would have had a reasonable expectation of success because the asserted combination of Bourque and Wampler “would ‘fit[] well between the apex of the heart and the adjacent diaphragm’ due to the pump’s ‘development as a compact’ device and the existence of several similar LVADs that fit well at that position.” Id. at 87 (citing Ex. 1003 ¶¶ 652–655; Ex. 1007, 5). Lastly, Petitioner argues that the asserted combination would have been obvious to try, because “there were a finite number (i.e., two) [of] options for LVAD implantation: the device would be implanted at a preperitoneal pocket, or at the cardiac apex.” Id. at 87–88 (citing Ex. 1003 ¶ 656). At this stage, we find Petitioner’s arguments persuasive, and find that Petitioner has provided sufficiently articulated reasoning with rational underpinning to support combining Wampler and Bourque’s teachings in the manner Petitioner does.” slip op. at 20
Claim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,754,077 - PTAB · Jun 10, 2025 · IPR2025-00114 · APJ Annette R Reimers · IPR · Institution
The Board instituted IPR on claims 1, 2, 4, 5, 7, 8, 11, 12, 14–16, and 18–20 on all petitioned grounds, finding a reasonable likelihood of unpatentability over Bourque and Wampler.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. 35 U.S.C. § 314(b) (2018); 37 C.F.R. § 42.4(a) (2024). An inter partes review may not be instituted “unless . . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Upon consideration of the Petition, the Preliminary Response, and the evidence of record, we conclude that the information demonstrates a reasonable likelihood that Petitioner would prevail in showing the unpatentability of at least one of the Challenged Claims. Accordingly, we institute an inter partes review as to the Challenged Claims of the ’879 patent.” slip op. at 2
- BurdenMixed
“Decision we find “axially adjacent” to mean “adjacent to one another as measured along a central axis.” Petitioner does not contend or show in the Petition that Wampler teaches a magnetically driven rotor adjacent to a first magnetic device as measured along a central axis. See Pet. 24–26. In” slip op. at 30
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends a person of ordinary skill in the art at the time of the invention “would have at least a bachelor’s degree in engineering; knowledge and experience in human circulatory system anatomy and physiology; and at least five years’ experience designing and developing implantable medical devices.” Pet. 7 (citing Ex. 1003 ¶ 18). At this stage of the proceeding, Patent Owner does not contest Petitioner’s proposed level of ordinary skill in the art. See Prelim. Resp. 1. We find, for purposes of this appropriate level of skill at the time of the claimed invention and that the level of skill reflected in these references and in the ’879 patent is consistent with the definition of a person of ordinary skill in the art proposed by Petitioner. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 22
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“Magnetic Device” and “Magnetically Driven Rotor” along a “Central Axis”. Ex. 1019, 6. We find nothing in Exhibit 1019 that defines “axially adjacent” to mean “a magnetic element sealed within a rotor,” as Petitioner alleges. In this regard, Patent Owner argues as follows: Exhibit 1019 contains no mention of “a magnetic element sealed within a rotor” or a contention that such a configuration would represent an “axially adjacent” orientation of such components. Instead, [in Exhibit 1019], Patent Owner illustrates a Petitioner product and labels components identified as the claimed magnetically driven rotor and first magnetic device that are adjacent to one another as measured along a central axis. [See Ex. 1019 at 5]. This is in accordance with the plain and ordinary meaning of the claim terms and does not suggest that any component “sealed within” another component would categorically be axially adjacent thereto.” slip op. at 29
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,572,879 - PTAB · Jun 9, 2025 · IPR2025-00112 · APJ James A Tartal · IPR · Institution
The Board instituted IPR on claims 1–3, 10, 11, 14, and 17 on all petitioned grounds, finding a reasonable likelihood of success on obviousness over Bourque and Wampler.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. 35 U.S.C. § 314(b) (2018); 37 C.F.R. § 42.4(a) (2024). An inter partes review may not be instituted “unless . . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Upon consideration of the Petition, the Preliminary Response, and the evidence of record, we conclude that the information demonstrates a reasonable likelihood that Petitioner would prevail in showing the unpatentability of at least one of the Challenged Claims. Accordingly, we institute an inter partes review as to the Challenged Claims of the ’357 patent.” slip op. at 2
- BurdenDecided for petitioner
“4. Determination as to a Reasonable Likelihood of Prevailing Upon consideration of the arguments and evidence of record, we conclude, for the reasons provided above, that the information presented in the Petition demonstrates a reasonable likelihood that Petitioner would prevail in showing the unpatentability of claims 1–3, 10, 11, 14, and 17 of the ’357 patent as obvious over Bourque and Wampler.” slip op. at 37
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends a person of ordinary skill in the art at the time of the invention “would have at least a bachelor’s degree in engineering; knowledge and experience in human circulatory system anatomy and physiology; and at least five years’ experience designing and developing implantable medical devices.” Pet. 6 (citing Ex. 1003 ¶ 18). At this stage of the proceeding, Patent Owner does not contest Petitioner’s proposed level of ordinary skill in the art. See Prelim. Resp. 1. We find, for purposes of this appropriate level of skill at the time of the claimed invention and that the level of skill reflected in these references and in the ’357 patent is consistent with the definition of a person of ordinary skill in the art proposed by Petitioner. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 18
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“In sum, Petitioner maintains a narrower construction of “magneto coupling” is correct, and alleges grounds of unpatentability based on both its narrower proposed construction (a construction encompassed by the broader construction), as well as based on the broader construction that Patent Owner does not dispute. We, therefore, find no merit to Patent Owner’s argument that Petitioner’s contention “contradicts itself” or fails to present a “prima facie obviousness position.” See Prelim. Resp. 3. Patent Owner does not dispute the broader construction applied by Petitioner, which encompasses the narrower construction Petitioner proposes. For purposes of this Decision, we apply the broader construction of “magneto coupling,” which encompasses generating a rotating field either by rotating magnets or by an electromagnet / stator.” slip op. at 22
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,351,357
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.