• Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Maxell LtdNo claims unpatentable
  PTAB · Oct 31, 2025 · IPR2024-00777 · APJ Jameson Lee · IPR · Final written decision

  Claims 16–27 were not shown unpatentable because Petitioner failed to account for limitations 16[b] and 16[i] and their counterparts across the asserted obviousness grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner proposes that a person of ordinary skill in the art “would have a Bachelor of Science degree in Electrical Engineering, Computer Engineering, Computer Science, Human Computer Interaction, or a related technical field, with at least one year of experience working in the field of user interfaces and/or content management.” PO Resp. 11 (citing Ex. 2040 ¶ 53). The Decision on Institution adopted Petitioner’s proposed level of ordinary skill in the art. Inst. Dec. 10. We find Patent Owner’s stated level to be less precise than that proposed by Petitioner in that the modifier “at least” used by Patent owner imposes no upper bound on the amount of experience possessed by one of ordinary skill in the art. Also, Patent Owner states: “The difference between the Board’s definition and Patent Owner’s (EX2040. ¶53) does not change the arguments set forth herein.” PO Resp. 11. Thus, we continue to adopt Petitioner’s stated level of ordinary skill in the art.4 4 All of our findings and conclusions would still be the same, however, had we applied Patent Owner’s articulation of the level of ordinary skill in the art.” slip op. at 8

  • Prior constructionPrior construction adoptedDecided for patent owner

    “In its Reply, Petitioner does not assert that the district court’s construction is incorrect. We agree with Patent Owner that the district court’s construction is better than Petitioner’s proposed construction, because for reasons indicated by Patent Owner, which are not disputed by Petitioner, settings in the computer, e.g., dedicated folders for each user are the user profiles, rather than simply data alone of any kind. Further, when asked about the appropriateness of the district court’s construction, counsel for Petitioner expressed that Petitioner has no objection to the Board’s adopting the district court’s construction for “user profile”: JUDGE LEE: So, you’d be fine with just going with the District Court’s construction? MR. HEINTZ: Yes, Your Honor. Tr. 15:22–24. For the foregoing reasons, we adopt the district court’s construction for “user profile,” i.e., “a collection of settings and information associated with a user.”” slip op. at 13

  • BurdenNot shown unpatentable

    “PO Resp. 30–31 (Figure 26 omitted). In its Reply, Petitioner still does not provide an articulated reason for placing user profile selection buttons, labeled with user names, within Horn’s panes 2601 or 2602. Reply 12–14. Although Horn does describe personalized profile, Petitioner points to no disclosure of Horn as to how a user would have selected his or her own profile from among a plurality of user profiles. Petitioner presents no reason for placing these user profile selection buttons, labeled with user names, gleaned from or suggested by Baumgartner, within either pane 2601 or pane 2602 in Horn’s workspace view. Further, pane 2602 contains “a list of all collections defined by MFS and the user,” and pane 2601 lists the source examined by the user to create his or her collections. Ex. 1005, 19:41–46. That disclosure suggests the contents of panes 2601 and 2602 are tied to one particular user. No rational basis is articulated by Petitioner to place user profile selection buttons within these panes which appear to be in the profile space of one user. For the foregoing reasons, Petitioner has not adequately accounted for limitation 16[b].” slip op. at 22

  • Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner

    “The test for sufficiency of a written description under 35 U.S.C. § 112 is whether the earlier application’s disclosure “reasonably conveys to those skilled in the art that the inventor had possession of the claimed subject matter as of the filing date.” Ariad Pharms., Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc). The specification must “clearly allow persons of ordinary skill in the art to recognize that [the inventor] invented what is claimed.” Id. The Court of Appeals for the Federal Circuit has explained: One shows that one is “in possession” of the invention by describing the invention, with all its claimed limitations, not that which makes it obvious. Id. (“[T]he applicant must also convey to those skilled in the art that, as of the filing date sought, he or she was in possession of the invention. The invention is, for purposes of the ‘written description’ inquiry, whatever is now claimed.”) (emphasis in original). One does that by such descriptive means as words, structures, figures, diagrams, formulas, etc., that fully set forth the claimed invention. Although the exact terms need not be used in haec verba, see Eiselstein v. Frank, 52 F.3d 1035, 1038, 34 USPQ2d 1467, 1470 (Fed.Cir.1995) (“[T]he prior application need not describe the claimed subject matter in exactly the same terms as used in the claims. . . .”), the specification must contain an equivalent description of the claimed subject matter. A description which renders obvious the invention for which an earlier filing date is sought is not sufficient. Lockwood v. American Airlines, Inc., 107 F.3d 1565 (Fed. Cir. 1997).” slip op. at 31

  Patent outcomesUS 11,017,815 not shown unpatentable
  Claim construction§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham
  Patents in suitUS 11,017,815
• Ford Motor Company / General Motors LLC et al. v. Neo Wireless LLCNo claims unpatentable
  PTAB · Sep 3, 2025 · IPR2023-00763 · APJ Kristen L Droesch · IPR · Final written decision

  Claims 7 and 11 were not shown unpatentable as obvious over Park and IEEE 802.16-2004 because the combination did not teach a claimed mobile device.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “In summary, the extrinsic record shows that, in the context of wireless network communications using the IEEE 802.16 standard, a “mobile device” is distinct from and excludes a device that is “fixed” or “portable,” where a “mobile” device is described as a device that is mobile during wireless network communications, and a “fixed” or “portable” device is described as a device that is fixed or slowly moving during wireless network communications. See Ex. 1005 ¶ 11; Ex. 1025, 24, 34, 38, 45; Ex. 2025, 71. This understanding of a “mobile device” from the extrinsic record is consistent with the language of claim 7 which recites a mobile device configured for wireless network communications (e.g., receiving an identifier and a signal from a base station), and consistent with the ’450 Patent disclosure that repeatedly and consistently utilizes the term “mobile device.” Accordingly, based on the record, we construe “mobile device” as a device that is mobile during wireless network communications, and is not fixed or slowly moving during wireless network communications.” slip op. at 19

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached

    “We do not agree with Petitioner’s arguments because, as explained above in Section III.B., we construe “mobile device” as a device that is mobile during wireless network communications, and is not fixed or slowly moving during wireless network communications. Thus, after having considered both parties’ arguments and the cited supporting evidence, we are not persuaded that the combination of Park and IEEE 802.16-2004, including the application of Park to WiBro’s teaching of stationary or slowly moving devices communicating using band AMC, teaches or suggests a “mobile device,” as properly construed, that is configured to perform the limitations recited in the body of claim 7.” slip op. at 36

  • PTAB / AIA Trials › Other PTAB motions (exclude, strike, seal, additional discovery, rehearing)Granted

    “Under 37 C.F.R. § 42.123(a), a party may file a motion to submit supplemental information if the following requirements are met: (1) a request for authorization to file such motion must be made within one month of the date the trial was instituted; and (2) the supplemental information must be relevant to a claim for which trial has been instituted. In addition to these requirements, the Board considers the motion in light of its mandate under 37 C.F.R. § 42.1(b), i.e., “to secure the just, speedy, and inexpensive resolution of every proceeding.”” slip op. at 41

  Patent outcomesUS 10,447,450 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,447,450
• Ford Motor Company / General Motors LLC et al. v. Neo Wireless LLCNo claims unpatentable
  PTAB · Sep 3, 2025 · IPR2023-00962 · APJ Kristen L Droesch · IPR · Final written decision

  Claims 7 and 11 were not shown unpatentable as obvious over Park and IEEE 802.16-2004 because the combination did not teach a mobile device as construed.

  RulingsFinal written decision

  • Director reviewDirector review, grantedGranted

    “Ford requested Director Review of the Institution Denial Decision, which was granted. Papers 18, 19. On March 22, 2024, the Director issued a Decision Vacating the Ford Institution Denial Decision as an improper extension of the “significant relationship,” as set forth in General Plastic and Valve, and remanding to the Board to issue a decision on institution that addresses the merits of the Petition. Paper 28 (“Director’s Decision”). In addition, the Director sua sponte granted Director Review of the GM and Nissan Institution Denial Decision and, on March 22, 2024, vacated and remanded the GM and Nissan Institution Denial Decision for the same reasons as those set forth in the Director’s Decision. GM and Nissan IPR, Papers 12, 16.” slip op. at 3

  • PTAB / AIA Trials › Discretionary denial › General Plastic (serial petitions)Institution denied general plasticInstitution denied

    “On November 9, 2023, we denied institution under § 314(a), after considering the factors set forth in General Plastic Industrial Co. v. Canon Kabushiki Kaisha, IPR2016-01357, Paper 19 (PTAB Sept. 6, 2017) (precedential only as to Section II.B.4.i) (“General Plastic”), and expanded upon in Valve Corp. v. Electronic Scripting Products, Inc., IPR2019-00062, Paper 11 (PTAB Apr. 2, 2019) (precedential) (“Valve”). Paper 17 (“Ford Institution Denial Decision”). General Motors LLC and Nissan North America Inc. (“GM and Nissan”) filed a petition requesting inter partes review of claims 7 and 11 of the ’450 Patent and a motion for joinder with this proceeding. IPR2023- 00962 (“GM and Nissan IPR”), Papers 3, 4. On December 6, 2023, we denied institution under § 314(a) based on the petition filed in the GM and Nissan IPR after consideration of the factors set forth in General Plastic and Valve and denied the Motion for Joinder as moot on the basis of the Ford Institution Denial Decision. See GM and Nissan IPR, Paper 11 (“GM and Nissan Institution Denial Decision”).” slip op. at 2

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “Subsequently, pursuant to 35 U.S.C. § 314, we instituted trial on September 11, 2024, as to all of the challenged claims and all of the grounds raised in the Petition. Paper 30 (“Institution Decision,” “Dec. on Inst.”). We also instituted trial and granted the Motion for Joinder in IPR2023- 00962. See GM and Nissan IPR, Paper 18.” slip op. at 3

  • PTAB / AIA Trials › Joinder §315(c) / SAS all-or-nothingJoinder, grantedGranted

    “Subsequently, pursuant to 35 U.S.C. § 314, we instituted trial on September 11, 2024, as to all of the challenged claims and all of the grounds raised in the Petition. Paper 30 (“Institution Decision,” “Dec. on Inst.”). We also instituted trial and granted the Motion for Joinder in IPR2023- 00962. See GM and Nissan IPR, Paper 18.” slip op. at 3

  Patent outcomesUS 10,447,450 not shown unpatentable
  Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSR · Graham
  Patents in suitUS 10,447,450
• Tesla, Inc. v. Graphite Charging Company LLCNo claims unpatentable
  PTAB · Aug 19, 2025 · IPR2024-00388 · APJ Ken B Barrett · IPR · Final written decision

  Claims 1–20 were not shown unpatentable because Wang and Wang with AESO did not establish the claimed analysis, and Cooley did not disclose reducing current power consumption.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “the claims require a decision engine to perform those elements.” Tr. 48:17– 20. In light of this, we fail to understand the basis for Patent Owner’s objection to the characterization of the level of ordinary skill involving experience with “intelligent” techniques or devices that control grid electricity. We determine that Petitioner’s definition is consistent with the level of ordinary skill reflected in the Specification and the prior art references of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (recognizing that the prior art itself may reflect an appropriate level of skill in the art). We, therefore, apply Petitioner’s definition of the person of ordinary skill in the art. We note, however, that were we to adopt Patent Owner’s assessment, the outcome of this Decision would be the same.” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “Patent Owner (PO Resp. 12, 49–50) points to the Specification’s list of “[e]xamples of power reduction actions.” Ex. 1001, 8:47–63. Patent Owner asserts that the list includes numerous examples of power reductions that occur in the present and one that takes place in the future—namely, “scheduling nonessential operations at a different time (e.g., nonessential software or hardware upgrades).” Ex. 1001, 8:61–62 (cited at PO Resp. 12, 50). We are persuaded by Patent Owner’s contention (PO Resp. 12) that the applicant, by including the term “current” in the claims, intentionally narrowed the claims to power consumption reductions that occur temporally in the present, rather than those that occur in the future. See Pet. Reply 6–7 (Petitioner asserting that Patent Owner’s position is “inconsistent with the specification’s examples,” but then arguing that the Specification does not support that position rather than pointing to any purported inconsistencies). Because the independent claims recite the term “current,” construing the term in the temporal sense is not, as Petitioner argues, importing into the claims an example from the Specification. See Pet. Reply 8.” slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundReasonable expectation not foundNot shown unpatentable

    “Given the interchangeable nature taught for various features of Wang’s embodiments, it would have been a routine and obvious matter for a POSA to combine aspects from Wang’s various embodiments (e.g., data acquisition, internal hardware, data analysis performed by the UMC receiver 400 and/or the display 200). Moreover, many of Wang’s embodiments–particularly of specific smart appliance types– include common components, thus further confirming combinability of aspects of the disclosed embodiments. A POSA would have had a reasonable expectation of success in combining features of the embodiments together. Id. at 77–78 (citing Ex. 1003 ¶¶ 201–203). We determine that these reasons are inadequate and too generic to satisfy Petitioner’s burden as they lack a clear explanation of what and how “aspects from Wang’s various embodiments” are proposed to be combined along with reasoning specific to that proposal. Petitioner, for example, does not explain adequately or persuasively why a person of ordinary skill in the art would have added a display that purportedly receives and analyzes data to a “smart appliance,” when that appliance already has an application processor that purportedly receives and analyzes the same data. It is not enough for Petitioner to allege that all of the elements of the challenged claims can be found somewhere in the various embodiments of Wang; Petitioner must also show that a person of ordinary skill in the art would have had a reason to combine the elements in the manner as arranged in the challenged claims. See KSR Int’l Co., 550 U.S. at 418 (“[A] patent composed of several elements is not proved obvious merely by demonstrating that each of its elements was, independently, known in the prior art. Although common sense directs one to look with care at a patent application that claims as innovation the combination of two known devices according to their established functions, it can be important to identify a reason that would have prompted a person of ordinary skill in the relevant field to combine the elements in the way the claimed new invention does.”). We find Petitioner has not shown an adequate reason to combine embodiments.” slip op. at 38

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentable

    “We determine that these reasons are inadequate and too generic to satisfy Petitioner’s burden as they lack a clear explanation of what and how “aspects from Wang’s various embodiments” are proposed to be combined along with reasoning specific to that proposal. Petitioner, for example, does not explain adequately or persuasively why a person of ordinary skill in the art would have added a display that purportedly receives and analyzes data to a “smart appliance,” when that appliance already has an application processor that purportedly receives and analyzes the same data. It is not enough for Petitioner to allege that all of the elements of the challenged claims can be found somewhere in the various embodiments of Wang; Petitioner must also show that a person of ordinary skill in the art would have had a reason to combine the elements in the manner as arranged in the challenged claims. See KSR Int’l Co., 550 U.S. at 418 (“[A] patent composed of several elements is not proved obvious merely by demonstrating that each of its elements was, independently, known in the prior art. Although common sense directs one to look with care at a patent application that claims as innovation the combination of two known devices according to their established functions, it can be important to identify a reason that would have prompted a person of ordinary skill in the relevant field to combine the elements in the way the claimed new invention does.”). We find Petitioner has not shown an adequate reason to combine embodiments.” slip op. at 38

  Patent outcomesUS 8,291,243 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,291,243
• AT&T Mobility LLC / AT&T Services Inc. et al. v. Daingean Technologies Ltd.No claims unpatentable
  PTAB · Jul 14, 2025 · IPR2024-00402 · APJ Mary C Hoffman · IPR · Final written decision

  The Board granted Patent Owner’s revised non-contingent motion to amend, canceling claims 1–4 and substituting claims 7 and 8, which Petitioner did not prove unpatentable.

  RulingsFinal written decision

  • PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend, grantedGranted

    “whether the motion to amend meets the statutory and regulatory requirements set forth in 35 U.S.C. § 316(d) and 37 C.F.R. § 42.121.” See Lectrosonics, Inc. v. Zaxcom, Inc., IPR2018-01129, Paper 15 at 4 (PTAB Feb. 25, 2019) (precedential). A “patent owner bears the burden of persuasion to show, by a preponderance of the evidence, that the motion to amend complies” with the applicable statutory and regulatory requirements. 37 C.F.R. § 42.121(d)(1). Specifically, a patent owner must demonstrate the following: (1) the amendment proposes a reasonable number of substitute claims; (2) the amendment responds to a ground of unpatentability involved in the trial; (3) the amendment does not seek to enlarge the scope of the claims of the patent; and (4) the amendment does not introduce new matter. See 35 U.S.C. § 316(d); 37 C.F.R. § 42.121(a)–(b). For the reasons explained below, Patent Owner satisfies its burden of persuasion to show that the amendments comply with the applicable statutory and regulatory requirements.” slip op. at 8

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “Both parties rely on expert testimony for their respective positions relating to the number of years of experience needed to attain ordinary skill, but neither expert cites supporting evidence for their testimony. See Ex. 1002 ¶ 33; Ex. 2002 ¶ 15. Our decision is the same regardless of whether the length of experience is two years or three. We find Patent Owner’s proposed “wireless communications” is more consistent with the ’958 patent than Petitioner’s proposed “telecommunication,” which encompasses a variety of technologies including, e.g., landline and wireless telephones, cable, and satellite. See Ex. 1001, 1:11–62 (describing the invention in terms of wireless communications). Accordingly, we adopt a modified version of Petitioner’s proffered level of ordinary skill in the art, substituting “wireless communications” for “telecommunication.” Neither party, moreover, indicates the overall result would change based on a different definition.” slip op. at 18

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “We agree with Patent Owner that the recited second type SIBs exclude first type SIBs. The plain meaning of “first type” and “second type” indicates that the first type and second type are different in kind. RMTA 22 (App. A). Our interpretation is consistent with the Specification, which explains that second type SIBs exclude first type SIBs. As Patent Owner points out, the ’958 patent discloses “first type of system information (1TYP SIB) is . . . essential . . . for initial system access” and “second type of system information (2TYP SIB) is nonessential system information . . . defined as all other types of information, and thus excludes the [] information required for initial access.” Id. at 11–12 (citing Ex. 1001, 8:34– 46); see also Ex. 1001, Abstract (interchangeably using the terms second type and non-essential). Despite Petitioner’s argument that this disclosure is non-limiting and directed to a disclaimed example embodiment (Opp. 8–9), Petitioner could not identify any embodiment, among the approximately forty disclosed embodiments, describing something other than the first type SIB being essential information and the second type SIB being non-essential information. Tr. 22:18–26. Even the Petition acknowledges that “the ’958 Patent further classifies a second type of system information, the ‘non-essential’ SI, which is defined as all other types of information excluding that first type of information required for initial access.” Pet. 5. Furthermore, the prior art of record suggests that a person of ordinary skill would have understood second type SIBs exclude first type SIBs. See Ex. 1008 ¶ 48 (describing two categories of system information, “essential SI” and “Other SI”). Patent Owner’s expert also understood the recited first and second type SIBs as being mutually exclusive. See Ex. 1011, 49:10–13. For the above reasons, we do not agree with Petitioner that the recited second type SIB lacks any requirements, nor do we interpret claims 7 and 8 such that the first type SIB could be a second type SIB.” slip op. at 19

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “(d) Limitation 7h: Analysis We agree with Patent Owner that Petitioner’s arguments with respect to limitation 7h are insufficient because they fail to address the limitation as written and improperly incorporate previous arguments by reference. For example, Petitioner did not map the recited “group identifier” when opposing Patent Owner’s Revised Motion to Amend. See Opp. 16–17. In its Sur-reply, Petitioner contends that limitation 7h’s requirement of transmitting the group identifier was previously “set out in Patent Owner’s prior papers,” but does not refer to any specific papers or exhibits. Pet. Surreply 11–12. We decline to search for and piece together Petitioner’s arguments and evidence to develop a persuasive theory of unpatentability. See 37 C.F.R. section 42.6(a)(3). Petitioner similarly failed to address adequately where Lee discloses or suggests the recited “compressed format” and “plural parameters.” See Opp. 16–17. Aside from the above concerns, we also do not see sufficient explanation with respect to limitation 7h’s requirement that the transmitting by broadcast be based on a comparison of the value tag. Petitioner argues that, because Patent Owner does not dispute limitation 7g, “it would have been obvious to a POSITA to use the same value tag[] to determine the system information broadcast in Lee’s compressed format embodiment.” Pet. Sur-reply 12. This conclusory statement is not supported by any citations to evidence and was improperly introduced in the Sur-reply. Moreover, whether it was obvious to determine what system information is broadcast is not commensurate with the claim scope because limitation 7h requires that the broadcasting (not the broadcast content) be based on a comparison of the value tag. See supra III.B.4 and IV.B. Further, we are not persuaded that Lee’s transmitting by broadcast is” slip op. at 26

  Patent outcomesUS 10,841,958 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham · Nautilus
  Patents in suitUS 10,841,958
• Njoy, LLC / Njoy Holdings, Inc. v. Juul Labs, Inc.No claims unpatentable
  PTAB · Jun 10, 2025 · IPR2024-00231 · APJ Avelyn M Ross · IPR · Final written decision

  Claims 14–16, 18, 27–29, 31, and 32 were not proven unpatentable because the asserted references failed to establish the claimed airflow path or a reason to make the proposed combinations.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner’s and Patent Owner’s proposed levels of skill are similar and differ in that Petitioner’s relevant degrees and corresponding two years of experience additionally includes “industrial design” and “product design” and familiarity with “electrically powered vaporizing articles, their components or the underlying technologies” where Patent Owner requires two years of experience “designing electro-mechanical consumer products or an advanced degree.” Compare Pet. 7, with PO Resp. 2. Patent Owner alleges that “Petitioner has failed to establish unpatentability under either standard,” indicating that the level of skill in the art is not a dispositive issue. PO Resp. 3. In light of the record before us, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’123 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand the ’123 patent and the prior art. We note that the outcome of this Decision would be the same under Patent Owner’s proposed definition.” slip op. at 11

  • Expert testimonyPetitioner expert creditedOther

    “In this case, Mr. McAlexander meets both Petitioner’s and Patent Owner’s proposed level of skill in the art. As a result, we are persuaded Mr. McAlexander has the requisite skill and relevant expertise to offer testimony in this matter. For example, Mr. McAlexander has a Bachelor’s Degree in Electrical Engineering and far more than 2 years of experience in the electrical engineering field. Ex. 1027, 3–6, 7. In addition, Mr. McAlexander has provided expert consulting services in a wide range of technology areas involving the process and design of electro-mechanical consumer products. Ex. 1003 ¶ 5. Through one of Mr. McAlexander’s business ventures, his laboratory has “performed detailed airflow analyses, designing and constructing specialized apparatuses to emulate human breath, allowing for precise activation testing of ENDS devices.” Ex. 1043 ¶ 16. That said, a declarant’s expertise, even clothed as a skilled artisan, does not entitle a naked opinion persuasive weight. Ashland Oil, Inc. v. Delta Resins & Refractories, Inc., 776 F.2d 281, 294 (Fed. Cir. 1985). Here, Patent Owner had the opportunity to, and in fact did, thoroughly cross examine Mr. McAlexander about the purported deficiencies in his testimony. See, e.g., Exs. 2052, 2054; Daubert v. Merrell Dow Pharm., Inc., 509 U.S. 579, 595 (1993) (“Vigorous cross examination [and] presentation of contrary evidence . . . are the traditional and appropriate means of attacking shaky but admissible evidence.”). Therefore, to the extent Patent Owner credibly identifies deficiencies in Mr. McAlexander’s testimony or that testimony lacks factual support or is based on broad, conclusory assertions, we will assign appropriate weight. See Velander v. Garner, 348 F.3d 1359, 1371 (Fed. Cir. 2003) (explaining that it is within the Board’s discretion, as the trier of fact, to accord appropriate weight to the evidence presented).” slip op. at 12

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “Petitioner contends that the parties proposed a construction for “pressure valve,” a limitation appearing in claims 18 and 31, during the ITC investigation. Pet. 7 (citing Ex. 1001, 41:58–65). Patent Owner contends that the terms of the ’123 patent should be given their plain and ordinary meaning. PO Resp. 4. Because resolution of the issues presented in this case do not require construction of the term “pressure valve,” we do not expressly construe this claim term. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 14

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “We agree with Patent Owner. To anticipate a claim, a reference “must not only disclose all elements of the claim within the four corners of the document, but must also disclose those elements ‘arranged as in the claim.’” Net MoneyIN, 545 F.3d at 1369. “The requirement that the prior art elements themselves be arranged as in the claim means that the claims cannot be treated . . . as mere catalogs of separate parts, in disregard of the part-to-part relationships set forth in the claims.” Therasense, Inc. v. Becton, Dickinson & Co., 593 F.3d 1325, 1332 (Fed. Cir. 2010). Indeed, the prior art reference “must clearly and unequivocally disclose the claimed [invention] or direct those skilled in the art to the [invention] without any need for picking, choosing, and combining various disclosures not directly related to each other by the teachings of the cited reference.” Net MoneyIN, 545 F.3d at 1371 (citation omitted). “[D]ifferences between the prior art reference and the claimed invention, however slight, invoke the question of obviousness, not anticipation.” Id.” slip op. at 20

  Patent outcomesUS 10,130,123 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,130,123
• DBR Finance, Inc. v. Rugged Cross Hunting Blinds, LLCNo claims unpatentable
  PTAB · May 29, 2025 · IPR2024-00291 · APJ Cynthia L Murphy · IPR · Final written decision

  The Board held claims 1–19 not unpatentable because Petitioner did not prove the proposed Whybrew–Strength combinations disclosed the claimed mesh panels with spaced holes.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “We question, therefore, whether someone having an education in textile engineering or physics, but no experience in the field of hunting blinds, would be consistent with the level of skill portrayed by the ’535 Patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). We note that Petitioner’s expert’s experience, education, and qualifications are rooted in textiles, fibers and physics, and sophisticated subjects related thereto. See Ex. 1007 ¶¶ 14–20. But his deposition revealed that he has little or no experience in the field of hunting blinds. See Ex. 2038, 8–14.5 5 The same might be said of Patent Owner’s expert. See Ex. 2031, ¶¶ 6–7; Ex. 1023, 16. However, our obviousness analysis leaned lightly, if at all, on her declarations and testimony.” slip op. at 12

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionDecided for petitioner

    “1. Mesh Material In the Petition, Petitioner asks that “the term ‘mesh material’” be interpreted in accordance with “a plain and ordinary usage.” Pet. 25. Per Petitioner, the “plain and ordinary” meaning of the term “mesh material” is “a woven material of open texture with spaced holes therein.” Id. Per Petitioner, “[o]ther typical terms used to describe a mesh-like material” are “a screen material, or a netting material, which are believed to be synonyms.” Id. Patent Owner does not dispute that a mesh material would have an open texture with spaced holes therein. See PO Resp. 18. We find that Petitioner’s proposed construction aligns with the ’535 Patent’s specification. See Ex. 1001. The drawings in the ’535 Patent depict the mesh material 26 as having an array of uniformly spaced circular holes forming a net-like structure (see id., Fig. 1A, 1B, 4, 9) or an array of uniformly spaced rectangular openings (see id. Fig. 8) forming a screen-like structure. The embodiments of the mesh material 26 listed in the ’535 Patent (e.g., a mesh banner material, scrims, a network of fibers, etc.) are materials having net-like or screen-like structures. See id. at 6:47–7:28.6” slip op. at 14

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “Our construction aligns with the claim language; Petitioner’s proposed construction does not. See Ex. 1001, 10:4–19. The independent challenged claims set forth “one or more panels of mesh material” and then set forth “said one or more panels comprising: a first side with a camouflage pattern; and a second side with a dark color coating.” Id. at 10:4–11. The recited “said one or more panels” corresponds to the previously recited “one or more panels of mesh material,” not panels comprising a material that was only a “mesh” prior to printing/coating. See id. Also, the independent challenged claims set forth that “the one or more panels of the mesh material define an outer surface of the camouflage structure.” See id. at 10:18–19, 1:23–24 (emphasis added). And the panel(s) defining a hunting blind’s outer surface would include the dark color coating. Our construction aligns with the ’535 Patent’s specification; Petitioner’s proposed construction does not. See Ex. 1001. The ’535 Patent repeatedly describes the relevant panel material in the hunting blind (i.e., post printing/coating) as a mesh material. See id., Abst., 1:19–5:34, 6:47–7:28, 9:16–54, Figs. 1A, 1B, 9. The ’535 Patent expressly describes and depicts the mesh material 26 as including the camouflage pattern and the dark-color coating. See id. at 1:52–56, 3:24–25, 3:31–33, Figs. 1A, 1B. The ’535 Patent says that “panels” of this coated mesh material 26 “are used to form” a hunting blind. Id. at 3:22–26. The ’535 Patent says that “[m]esh material is presented for a hunting blind with a camouflage pattern printed on a first side and a second side with a color coating.” Id. at Abst. The ’535 Patent says that “mesh material of interwoven fabric is provided for a hunting blind including a camouflage pattern printed on a first side and a second side with a dark color coating.” Id. at 1:19–22; see also id. at 1:44–49. Our construction aligns with the ’535 Patent’s prosecution history; Petitioner’s proposed construction does not. See Ex. 1006. As mentioned above, throughout prosecution of the ’535 Patent, the same prior art material was mapped to the claimed panel(s) of mesh material. See Ex. 1006, 64–72, 122–106. The mapped-to prior art mesh material was described during prosecution as an “interwoven fabric” with “a pattern” printed on a first side and “a dark color coating” on a second side. Ex. 1006, 64; see also id. at 122. And the mapped-to prior art mesh material (i.e., which included not only the interwoven fabric but also the printed pattern and the dark color coating) had a “net-like structure” with an array of uniformly spaced “net holes” that are “not closed.” Ex. 2021, 4:1–5, see also id. at 2:58–3:6, 4:34–45, Figs. 1, 2a. Thus, we understand that claimed panel(s) of mesh material must have” slip op. at 17

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableNot shown unpatentable

    “However, Patent Owner does not bear the burden of proving Strength’s camouflage material 10 does not have holes. Rather, Petitioner bears the burden of proving that Strength’s camouflage material 10 does have holes. And Petitioner’s arguments that undermine Patent Owner’s position that Strength’s camouflage material 10 does not have holes, concurrently undermine Petitioner’s position that Strength’s camouflage material 10 does have holes. Per Petitioner, “Strength is silent on whether visible holes exist in the fabric” (Pet. Reply 8) and “the Strength reference doesn’t discuss anything about holes” (Tr. 14). Petitioner’s expert testified that it was his “understanding that Strength is silent” on “whether or not there are holes.” Ex. 2038, 44. Petitioner contends that Strength’s silence about the presence/ absence of holes hinders Patent Owner from proving that Strength’s camouflage material 10 does not have holes. See Pet. Reply 8. We agree. But this same silence likewise hinders Petitioner from proving that Strength’s camouflage material 10 does have holes.” slip op. at 35

  Patent outcomesUS 11,399,535 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,399,535
• Juul Labs, Inc. v. Njoy, LLCNo claims unpatentable
  PTAB · May 21, 2025 · IPR2024-00161 · APJ Christopher M Kaiser · IPR · Final written decision

  Claims 1–27 were not shown unpatentable because the asserted obviousness grounds failed to establish the claimed central airflow passageway or a reason to combine the references.

  RulingsFinal written decision

  • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

    “Relying on the testimony of Patent Owner’s declarant Dr. Singhose, Petitioner argues that a person of ordinary skill in the art “would have known a central straight path has less airflow resistance than a circuitous one.” Reply 22–23 (citing Ex. 1035, 127:15–128:9). But the same witness also testified that higher airflow resistance might be desirable and explained that providing more resistance to airflow might result in improved mixing. Ex. 1035, 21:21–22:12, 127:20–24, 170:10–14. In addition, Dr. Singhose testifies that the complicated design of the airflow passageway in Xia “serves important functions,” including “allow[ing] large droplets to be reabsorbed by the liquid-guiding mechanism,” allowing “excessive liquid in the airflow [to] condense,” and “prevent[ing] the chemical liquid from being sucked into the mouth.” Ex. 2022 ¶ 183 (citing Ex. 1004, 11, 13–14, 16). Although Petitioner’s declarant Dr. Sturges testifies that a straight airflow passageway “would provide improved, smoother air flow,” he does not provide any evidence supporting the view that the air flow would be improved. Ex. 1007 ¶ 118. We credit the testimony of Dr. Singhose that using a straight passageway in Xia would have been detrimental rather than beneficial. Ex. 2022 ¶ 183. Petitioner also argues that the inventors’ use of a straight path is evidence that the use of a straight passageway was “merely common-sense obviousness.” Reply 22–23. This is hindsight. Otsuka Pharm. Co. v. Sandoz, Inc., 678 F.3d 1280, 1296 (Fed. Cir. 2012) (“The inventor’s own path itself never leads to a conclusion of obviousness; that is hindsight.”). Moreover, it does not address the testimony of Dr. Singhose that the use of a complicated passageway like that in Xia had benefits not present in a straight central passageway.” slip op. at 29

  • Skill levelSkill level petitioner adoptedOther

    “B. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art (“POSITA”) “would have had a mechanical or electrical engineering degree, industrial design degree, or a similar technical degree, or equivalent work experience, and 5 to 10 years of experience in electromechanical devices.” Pet. 10 (citing Ex. 1007 ¶ 16). Prior to institution, Patent Owner stated that, for “the limited purpose of this Preliminary Response,” it “does not challenge the definition of a POSITA set forth in the Petition.” Prelim. Resp. 9. We adopted Petitioner’s proposed definition in our Decision granting institution. During trial, neither party disputed this definition. Upon a complete record, we see no reason to change the adopted definition.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “Patent Owner argues, however, that this presumption is overcome in the present case, and we agree. PO Resp. 28–32. We note that, although the claims require the first aperture to be “on the first end,” the claims still require that the “housing hav[e] a first aperture.” Thus, the issue is whether the aperture must be on the housing itself or part of the housing, as well as whether the aperture is on the first end of the housing. Although “having” and “includes” are used with respect to the solution holding medium to refer to elements located inside the housing, the specification of the ’881 patent suggests that the ends of the housing are part of the housing itself, rather than located inside the housing. First, “the first end . . . can be integrated into a single assembly as part of the housing.” Ex. 1001, 6:16–17. Second, “the housing . . . may comprise the cylindrical wall and two end-caps,” or “the housing . . . may comprise the cartridge wall and a single end-cap.” Id. at 3:55–59. The only figures of the ’881 patent that depict first end 206 show it at the end of the housing rather than located within the interior of housing 202. Id. at Figs. 2, 3. Moreover, there is no requirement to construe a claim term uniformly across multiple uses in the claims when doing so would be nonsensical. Microprocessor Enhancement Corp. v. Texas Instruments, Inc., 520 F.3d 1367, 1375 (Fed. Cir. 2008). Here, construing a first element that is recited as “having” or “includ[ing]” a second element always as encompassing not only second elements that are part of the first element, but also second elements that are located within the interior of the first element, would lead to nonsensical results. Claim 2 recites an airflow passageway “having a length having a circular cross section.” Ex. 1001, 17:59–60. It would be nonsensical to interpret this claim as encompassing an airflow passageway of non-circular cross section that contains another object that has a circular cross section, and neither party argues in favor of such a reading. Similarly, claim 16 recites an “airflow passageway having an interior having a uniform cross-sectional area,” and there is no reason to interpret this claim as encompassing an airflow passageway of non-uniform cross-sectional area that contains another object that itself has uniform cross-sectional area. Id. at 19:47–48. Thus, the claims do not use “having” or “includes” consistently to refer to elements located within the interior of an object; instead, they sometimes use these terms to refer to elements that are a part of an object. See Epcon Gas Sys., Inc. v. Bauer Compressors, Inc., 279 F.3d 1022, 1030–31 (Fed. Cir. 2002) (terms should be construed based on the context of how the terms are used in the claims).” slip op. at 13

  • Prior constructionPrior construction not adoptedDecided for patent owner

    “When we instituted trial, we preliminarily construed this phrase to encompass apertures that are located within the first end of the housing, determining on the record available at that time that “[t]he term does not require that the first aperture be located in the housing itself.” Inst. Dec. 16. We invited the parties to “address [the] construction of this term during trial,” id., and, on the full record developed during trial, we reach a different conclusion.” slip op. at 10

  Patent outcomesUS 10,334,881 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,334,881
• Hanshow America Inc. / Hanshow Technology Co., Ltd. v. Ses-Imagotag Inc.No claims unpatentable
  PTAB · May 14, 2025 · IPR2024-00189 · APJ William V Saindon · IPR · Final written decision

  Claims 1–9 were not shown unpatentable because Fujiwara lacks the claimed horizontal position, and Bandy with Fowler lacks the claimed vertical position.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “A person of ordinary skill in the art . . . would have had at least a Master of Science Degree in an academic area emphasizing electrical engineering, computer engineering, wireless telecommunication systems, or an equivalent field (or a similar technical Master’s Degree, or higher degree). Ex. 1009, ¶34. Alternatively, . . . a Bachelor’s Degree (or higher degree) in an academic area emphasizing electrical engineering, computer engineering, wireless telecommunication systems, or an equivalent field with two or more years of work experience in electrical engineering, wireless telecommunication systems, computer engineering, or an equivalent field. Id. Additional education in a relevant field or relevant industry experience may compensate for a deficit in one of the other aspects of the requirements stated above. Id. Pet. 9. Patent Owner applies the same definition. PO Resp. 17. We apply the parties’ proposed level of ordinary skill because it is reasonably consistent with the level of skill implied in the disclosure of the ’340 patent and the cited prior art.” slip op. at 6

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownNo construction neededGranted in part

    “c) Conclusion Having reviewed the claim language and the specification, we determine that the claimed planogram stores one piece of data with respect to identification—a unique identifier—and two pieces of data with respect to location—a vertical position and a horizontal position. Further, claim 1 states that each location (i.e., each horizontal/vertical position pair) is unique (“one-to-one”) for each unique identifier. Ex. 1001, 8:25–27. Thus, we determine that no horizontal/vertical position pair will be associated with more than one unique identifier (and vice versa). No other terms require construction at this time. See Realtime, 912 F.3d at 1375.” slip op. at 9

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “taught by “the horizontal position of the electronic shelf label along the horizontal shelf part 21, as shown in FIG. 4.” Pet. 21 (citing Ex. 1009 ¶ 75). Certainly, each shelf label in the real world, as well as in the drawing of Figure 4, has a horizontal position. However, that does not mean that Fujiwara’s database stores information indicating the horizontal position of the shelf label as required by the claim. The claim is not calling for the shelf label to have a location; it is calling for location information to be accessible by the server so that the server can determine the location of the mobile terminal. Ex. 1001, 8:19–24 (claiming a “method being performed by a central server configured to access a planogram associating . . . identifiers . . . with . . . locations . . . defined by a vertical and horizontal position”), 8:41–46 (claiming a method step of “determining a location of the mobile terminal . . . based on . . . the planogram). For example, fields in a database storing horizontal and vertical positions would be sufficient. Id. at 6:31–36 (“The central server 2 determines the location of said mobile terminal 1 from the identifier of said electronic label 3 using the data of a planogram associating a location with the label identifier.”), 7:16–18 (calling for the planogram to be stored in a database). To the extent we accept that Fujiwara teaches a unique identifier (shelf label ID) and a vertical position (e.g., shelf number 21-1), we find Fujiwara to be missing a horizontal position as required by the claim because neither the shelf number nor the shelf label ID provides an indication of where along the shelf the shelf label is located.” slip op. at 14

  • ExcludeMotion to exclude, deniedDenied

    “III. PATENT OWNER’S MOTION TO EXCLUDE Patent Owner moves to exclude Exhibits 1013–1021 and 1024–1027. PO Mot. Excl. 1. Our analysis above focuses on a dispositive issue regarding the claimed planogram. We are not apprised of any citations to these documents in the briefing regarding the planogram issue. Indeed, according to Patent Owner, Exhibits 1013–1021 involve one of the issues we did not address, regarding near-field communications. PO Mot. Excl. 3–4. Because this motion involves a question on evidence that is not relevant to the issues discussed in this Decision, we need not rule on the motion at this time. We dismiss Patent Owner’s motion to exclude as moot.” slip op. at 27

  Patent outcomesUS 10,674,340 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 10,674,340
• Precision Planting LLC v. Maschio Gaspardo S.P.A.No claims unpatentable
  PTAB · Mar 21, 2025 · IPR2024-00008 · APJ Benjamin D M Wood · IPR · Final written decision

  Claims 1–5, 7–14, and 16 were not shown unpatentable because the asserted anticipation and obviousness grounds failed to establish the claimed thrust-bearing element and its required location.

  RulingsFinal written decision

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for patent owner

    “We determine that the evidence of record overcomes the presumption that § 112, para. 6 does not apply because “thrust-bearing element” does not recite sufficiently definite structure in this case. See, e.g., Pet. 22 (the term is not used here according to its common meaning). First, the word “element” is a “[g]eneric term[]” or “verbal construct[]” often “used in a claim in a manner that is tantamount to using the word ‘means’” because it does not “connote sufficiently definite structure.” Williamson, 792 F.3d at 1350. We find nothing in the ’121 patent or elsewhere in the record suggesting that “element” in the term “thrust-bearing element” should be considered other than a generic placeholder term. Second, although the term “thrust bearing” may connote certain structure, “thrust-bearing element” does not. A “thrust bearing” is “a well-known term of art in engineering and is ‘a bearing which sustains axial loads and prevents axial movement of a loaded shaft.’” Ex. 1003 ¶ 46 (citing Ex. 1017, 2147). “The balls of traditional thrust bearings are positioned inline with the axial force, as thrust bearings are designed specifically to transmit axial load.” Id. Here, however, “thrust-bearing” is hyphenated, and is therefore a phrasal adjective modifying “element” rather than the noun phrase “thrust bearing.”8 Further, there are “substantial differences”” slip op. at 15

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Corresponding structure / algorithm (indefinite if none)Term construed board ownDecided for patent owner

    “We largely agree with Petitioner. “[S]tructure disclosed in the specification is ‘corresponding’ structure only if the specification or prosecution history clearly links or associates that structure to the function recited in the claim.” B. Braun Med. Inc. v. Abbott Labs., 124 F.3d 1419, 1424 (Fed.Cir.1997). The Specification of the ’121 patent “clearly links or associates” two components with the function of bearing axial thrust from the sowing disc: shaft 27 with flanging 30, and thrust-bearing plate 31. Ex. 1001, 3:25–35. Thrust-bearing plate 31 is expressly described as “bear[ing] on that surface of the disc which faces seal 24 . . . in order to withstand at least some of the axial load produced by the disc 16 on the seal 24. Ex. 1001, 3:28–31. Rotatably-mounted shaft 27 with flanging 30 is “fixed” to thrust-bearing plate 31 and therefore bears the axial load from the disc via the thrust-bearing plate. Id. at 3:25–28.10 10 Drive element 32 is described as part of thrust-bearing element 26 and permits thrust-bearing element 26 to be driven in rotation with sowing disc 16. Ex. 1001, 3:36–40. It is not described as bearing any axial load, however. Further, it is not necessary for the thrust-bearing element to rotate with the sowing disc for that element to bear axial load from the sowing disc. See id. at 3:58–59 (“Provision is also made for the thrust-bearing element 26 to be made idle and not driven in rotation by the [drive] shaft 20.”). Ultimately, however, whether drive element 32 is properly considered as part of the corresponding structure is not relevant to the outcome of this case. We disagree with Patent Owner that bearings 28 and seat 29 should be considered corresponding structure. The Specification does not associate these structures with any axial load-bearing function. Instead, bearings 28 and seat 29 are described as the means by which, and the location in which, shaft 27 is rotatably mounted. Ex. 1001, 3:25–27. Regardless, whether or not bearings 28 and seat 29 are considered corresponding structure does not affect the outcome of this case. In summary, we construe “thrust-bearing element” as a means-plus- function claim term under 35 U.S.C. § 112, para. 6. Its recited function is to bear thrust, or more specifically to “withstand at least some of the axial load produced by the disc on the seal.” The structure described in the Specification as corresponding to this function is shaft 27 with flanging 30, and thrust-bearing plate 31. We construe the limitation as directed to this structure, and equivalent structures.” slip op. at 21

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “The question is not whether the patentee disclaimed coverage over structures in which the thrust-bearing element is not located entirely in the movable portion of the housing. Instead, we must simply ascertain what the patentee meant by “supported rotatably in the movable portion.” To answer this question, we look to the Specification, which “is the single best guide to the meaning of a disputed term.” Phillips, 415 F.3d at 1315. “The construction that stays true to the claim language and most naturally aligns with the patent’s description of the invention will be, in the end, the correct construction.” Id. at 1316. Here, it is undisputed that in the sole embodiment described by the ’121 patent, the thrust-bearing element is supported by and entirely within the movable portion of the housing. Ex. 1001, Figs. 1, 2; Pet Post-Hearing Resp. 1; PO Post-Hearing Resp. 2. Construing “in the movable portion” to require the thrust-bearing element to be entirely within the movable portion both “stays true to the claim language and most naturally aligns” with the sole disclosed embodiment. Such a construction does not import the word “entirely” from the sole embodiment into the claims because the construction “arises from the claim language itself.” See SharkNinja Operating LLC v. iRobot Corp., 2024 WL 1132219, *2–*3 (Fed. Cir. 2024) (construing “primary brush assembly disposed within the round housing perimeter” to require that the primary brush assembly be “entirely within” the round housing perimeter is not an improper incorporation of “entirely” from embodiments into the claims because the construction “arises from the claim language itself”). Accordingly, having reviewed the complete record and the parties’ pre- and post-hearing briefing, we determine that “supported rotatably in the movable portion” means supported rotatably entirely in the space defined by the movable portion.” slip op. at 25

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “b. When “Thrust-Bearing Element” is Construed as a Means-Plus-Function Claim Limitation, there is Insufficient Evidence in the Record to Support a Finding that VenHuizen Discloses a Thrust- Bearing Element that is Supported Rotatably in the Movable Portion As noted above, Petitioner contends that VenHuizen’s shaft 55, retaining hub 56, and handle 58 together constitute the claimed thrust-bearing element “under a proper means-plus-function definition.” Pet. Reply 18–19.12 We do not discern sufficient evidence of record or persuasive technical reasoning from Petitioner to support a finding that these elements together are “supported rotatably in the movable portion” of the housing, as claim 1 requires. Ex. 1001, 4:38–39. We construed this limitation to require the thrust-bearing element to be supported rotatably entirely in the space defined by the movable portion (the space defined by VenHuizen’s second housing member 90). Petitioner does not contend, much less show, that these components are supported rotatably entirely in the movable second housing member 90. On the contrary, of the three components constituting VenHuizen’s thrust-bearing element, all of retaining hub 56 and most of shaft 55 are located in the fixed portion of the housing (first housing member 50), not the movable portion 90. See Ex. 1001, Fig. 6. Only handle 58 is ever located in the movable portion (when the fixed and movable portions are joined together). See id. Accordingly, Petitioner has not shown that VenHuizen discloses a thrust-bearing element rotatably supported in the movable portion.” slip op. at 35

  Patent outcomesUS 8,770,121 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR
  Patents in suitUS 8,770,121

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.