- Nespresso USA, Inc. v. K-Fee System GmbHAll claims unpatentablePTAB · Sep 10, 2024 · IPR2023-00485 · APJ Jon B Tornquist · IPR · Final written decision
Claims 1–10 are unpatentable as obvious over the combined disclosures of Yoakim, Jarisch, Rossi, and Castellani.
RulingsFinal written decision- Skill levelSkill level board ownPetitioner expert creditedDecided for petitioner
“have a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products.” Pet. 31 (citing Ex. 1003 ¶ 40). In the Institution Decision, we preliminarily determined that a person of ordinary skill in the art “would have a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products, as well as experience with sensors for recognizing an identifier.” Inst. Dec. 8 (emphasis added). Neither party disputes this conclusion. PO Resp. 9; see generally Pet. Reply. As such, we adopt our preliminary definition of the ordinarily skilled artisan for purposes of this Final Written Decision.” slip op. at 8
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“designing medical devices and components, and that those experiences represent work designing products similar to mechanical beverage systems, Patent Owner fails to direct the Board to evidence sufficient to establish that this experience, in the aggregate, amounts to at least “five years” or involved “experience with sensors for recognizing an identifier.” Inst. Dec. 8 (adopting Patent Owner’s own proposed definition of one of ordinary skill in the art); see Sur-reply 3–4 (citing Ex. 1066, 34:16–35:9; Ex. 1067, 101:3– 12, 102:20–104:9; Ex. 2017 ¶¶ 3–4, 8–10) (failing to establish adequately, if at all, how Dr. Howle’s qualifications include the requisite minimum five-year period of relevant design experience). Accordingly, we determine that Dr. Howle is not qualified to offer expert testimony from the perspective of a person having ordinary skill in the art in this proceeding.10 See Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1376–77 (Fed. Cir. 2022). The Federal Circuit has explained that “[t]o offer expert testimony from the perspective of a skilled artisan in a patent case,” including the issue of patent “validity,” the “witness must at least have ordinary skill in the art.” Id. (Board’s emphasis). “Without that skill, the witness’[s] opinions are neither relevant nor reliable.” Id. at 1377.” slip op. at 13
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“Second, Patent Owner and Dr. Howell assert that a person of ordinary skill in the art “would have understood upon reading the second German application that the capsule features described would be intended to be combinable with each of the described embodiments.” PO Resp. 40; Ex. 2017 ¶ 61. But Patent Owner and Dr. Howell do not explain how a barcode could be used in the devices depicted in Figures 16–18, which place the detection means 2.4.2 on the outer circumference of the flange (not its underside) and rely on toothed-rings physically interacting with either the chamber, retaining arms, or a pinion. Ex. 1047, 12:22–31, 13:8–18. Indeed, the second German priority application explains that means 2.4.2 physically interacts with retaining arms 30 (embodiments of Figures 16 and 17) or a pinon (embodiment of Figure 18), and if means 2.4.2 were not present in these embodiments the capsule would either “drop through into a waste container” or could not be inserted through the insertion shaft. Id. at 12:22– 27, 13:9–12, 13:16–35 (noting that in the embodiment disclosed in Figure 18 a pinon interacts with means 2.4.2 and only when means 2.4.2 “is formed complementary to the teeth of the means” can the capsule be inserted). At no point does the second German application identify means 2.4.2 as a barcode or suggest a barcode could be used as the detection means. The second German application also states that A person skilled in the art is also aware that for example the insertion shaft may also contain a sensor, for example a camera, clear, however, that element 27 is part of the brewing chamber, and not the capsule. Ex. 1047, 12:27–31, 13:5–8, 13:21–26, 15:36. Thus, we are not persuaded that the toothed ring is in fact on the bottom side of the flange. which senses the shape of the means 2.4.2. For example, it would be possible, in the present case, for the shape of the teeth and/or the spacing between the same to be sensed. This signal, in turn, is passed to a control means, which frees, for example, the brewing chamber if the capsule is the correct one. Ex. 1047, 14:11–19. Again, despite using a camera to determine if a capsule is “the correct one,” the second German application does not suggest using a barcode in place of the toothed-ring structure, or suggest moving the location of the detection means 2.4.2 from the outer surface to the underside of the flange. This reinforces that the inventors did not contemplate using a barcode in the embodiments depicted in Figures 16–18.” slip op. at 23
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“As asserted by Petitioner, Jarisch teaches how to move a code in a centrifugal brewing system to the bottom of the flange and how to configure a light-conductive material so that the detector’s light source will reach the bottom of the flange. Pet. 48–49; Pet. Reply 23–24 (Ex. 1003 ¶¶ 184–185; Ex. 1005 ¶¶ 82–84, Fig. 5). And, although Figure 61 of Yoakim discloses a flare in its brewing chamber, bodily incorporation is not required, and we are directed to no persuasive argument or evidence that Yoakim could not be configured with a straight chamber, as generally depicted in Figure 5 of Jarisch. Pet. Reply 24 (noting that Dr. Howle’s testimony on this subject is “conclusory” and depends on “bodily incorporation”). As such, we credit the testimony of Mr. Jobin that a person of ordinary skill in the art would have sought to place the code at the bottom of the flange and would have had a reasonable expectation of success in so doing.17 Ex. 1003 ¶ 184. Patent Owner further contends that Yoakim requires that the capsule holder be capable of receiving a set of multiple volume capsules and that 17 As discussed above, Mr. Jobin has extensive experience in the design of brewing devices. Conversely, Dr. Howle has limited experience in this field and is not one of ordinary skill in the art. Although Mr. Jobin’s testimony is more persuasive regardless of the discrepancy in experience between the two declarants, when this difference in design experience is considered, it only serves to increase the weight we give to Mr. Jobin’s testimony. there is a “snug fit” to avoid “unbalances.” PO Sur-reply 8 (citing Ex. 1004 ¶¶ 205, 479, 484, 507, 512). According to Patent Owner, Petitioner does not explain adequately how the use of Jarisch’s “straight chamber” with a capsule holder that does not engage with the side wall of the capsule would allow insertion of the multiple volume capsules or permit a “snug fit.” Id.; PO Resp. 28. Patent Owner’s assertion that Yoakim discloses the use of certain capsules that might not fit into a device with Jarisch’s non-flared structure is ineffective to undercut the sufficiency of Petitioner’s showing on this point. As noted by Patent Owner, Yoakim discloses the use of certain capsules which might not fit into a device with Jarisch’s non-flared structure. But Petitioner is not seeking a bodily incorporation of Yoakim and Jarisch, and other embodiments of Yoakim do not require the type of flared capsule identified by Patent Owner. Ex. 1004, Fig. 63. Moreover, we are directed to no persuasive evidence that Jarisch’s lack of contact between the capsule side wall and the holder would render the device inoperable or even less effective. Id. (citing Ex. 2019, 36:18–37:6; Ex. 1005 ¶ 23 (Jarisch explaining that its device includes a capsule holding means and that the capsule may be successfully driven in rotation). As such, we credit the testimony of Mr. Jobin that one of ordinary skill in the art would have understood how to design the chamber of Yoakim to allow reading of a barcode on the underside of the flange and that this design would allow for successfully receiving single-serve capsules and driving them in rotation. Ex. 1003 ¶¶ 182–184; Ex. 1005 ¶ 23.” slip op. at 39
Patent outcomesUS 11,230,430 unpatentable§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 11,230,430 - Nespresso USA, Inc. v. K-Fee System GmbHAll claims unpatentablePTAB · Sep 10, 2024 · IPR2023-00502 · APJ Grace Karaffa Obermann · IPR · Final written decision
Claims 1–16 are unpatentable as obvious over the combined disclosures of Yoakim, Jarisch, and Rapparini.
RulingsFinal written decision- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportDecided for petitioner
“To obtain the benefit of the filing date of an earlier application, Patent Owner bears the burden of producing evidence to establish where each limitation of the challenged claims is disclosed in a single priority application. Studiengesellschaft Kohle, 112 F.3d at 1564; NTP, 654 F.3d at 1276. Petitioner identifies limitations of the challenged claims that are missing from each individual German priority application. Pet. 39–42. Patent Owner responds with no evidence or arguments suggesting that the identified limitations are disclosed in a single application. Resp. 10–12. On this record, no challenged claim is entitled to the benefit of the filing date of any of the three German priority applications; therefore, Jarisch qualifies as prior art under at least 35 U.S.C. § 102(e).” slip op. at 19
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“In other words, even if we accept that Dr. Howle has some experience designing medical devices and components, and that those experiences represent work designing products similar to mechanical beverage systems, Patent Owner fails to direct the Board to evidence sufficient to establish that this experience, in the aggregate, amounts to “at least five years” or involved “experience with sensors for recognizing identifiers.” Dec. 8 (adopting Patent Owner’s own proposed definition of ordinary skill in the art); see Sur-reply 3 (citing Ex. 1066, 34:16–35:9; Ex. 1067, 101:3–12, 102:30– 104:9; Ex. 2017 ¶¶ 3, 4) (failing to establish adequately, if at all, how Dr. Howle’s qualifications include the requisite minimum five-year period of relevant design experience). Accordingly, we determine that Dr. Howle is not qualified to offer expert testimony from the perspective of a person having ordinary skill in the art in this proceeding.12 Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1376–78 (Fed. Cir. 2022). The Federal Circuit has made plain that, “[t]o offer expert testimony from the perspective of a skilled artisan in a patent case,” including the issue of patent “validity,” the “witness must at least have ordinary skill in the art.” 12 To be clear, we are not saying that a witness supplying expert opinions must have satisfied the requirements of the level of ordinary skill in the art on or before the priority date of the challenged patent, which Patent Owner seems to understand. See Sur-reply 4–5. Instead, we evaluate whether Dr. Howle had at least the requisite qualifications of a person having ordinary skill in the art by the time he rendered his opinions. Osseo Imaging, LLC v. Planmeca USA, Inc., Appeal No. 2023-1627, slip op. at 7 (Fed. Cir. Sept. 4, 2024) (“[A]n expert can acquire the necessary skill later and develop an understanding of what a person of ordinary skill knew at the time of the invention,” however, where “the expert was not a person of ordinary skill at the time of the invention may well be used during cross-examination to undermine the credibility of the expert.”); see id., slip op. at 5–6 (affirmatively quoting Kyocera). Id. (Board’s emphasis). “Without that skill, the witness’[s] opinions are neither relevant nor reliable.” Id. at 1377. “‘Admitting testimony from a person . . . with no skill in the pertinent art serves only to cause mischief and confuse the factfinder.’” That testimony would ‘amount[ ] to nothing more than advocacy from the witness stand.’” Id. (quoting Sundance, Inc. v. DeMonte Fabricating Ltd., 550 F.3d 1356, 1362, 1364–65 (Fed. Cir. 2008)). Alternatively, even if we accept that Dr. Howle possesses “at least five years” of relevant design experience, on this record, we agree with Petitioner that his opinions are entitled to less weight than those of Petitioner’s witness, Mr. Jobin. Reply 27. Unlike Dr. Howle, Mr. Jobin is a designer by profession, with more than 30 years of industry experience. Reply 27 (citing Ex. 1003 ¶¶ 5–30). For example, Mr. Jobin designed a home-based beer dispensing system utilizing cartridge identification technologies. Id. (citing Ex. 1003 ¶ 24). Mr. Jobin also “has substantial experience with sensors for recognizing identifiers.” Id. (citing Ex. 1003 ¶ 19; Ex. 1072, 3712–19, 67:22–70:19). Dr. Howle, by contrast, “has never designed a beverage machine.” Reply 22; see generally Sur-reply (declining to contest that assertion).13” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“In Petitioner’s contrary view, Jarisch teaches how to move a code in a centrifugal brewing system to the bottom of the flange and how to configure a light-conductive material so that the detector’s light source will reach the bottom of the flange. Pet. 45–46; Reply 21–22 (Ex. 1003 ¶¶ 194–195; Ex. 1005 ¶¶ 82–84, Fig. 5). Although Figure 61 of Yoakim discloses a flare in its brewing chamber, bodily incorporation is not required, and we are directed to no persuasive argument or evidence that Yoakim could not be configured with a straight chamber, as depicted in Figure 5 of Jarisch. We credit the testimony of Mr. Jobin that a person of ordinary skill in the art would have sought to place the code at the bottom of the flange and would have had a reasonable expectation of success in so doing. Ex. 1003 ¶ 184. For reasons explained above, we assign little or no weight to Dr. Howle’s conflicting testimony because he has little or no experience designing a mechanical beverage system or similar product. See supra 10– 16. Petitioner lays out persuasive reasons why Dr. Howle’s testimony, on this particular point, is “conclusory” and rests on “bodily incorporation” of the references. Reply 24; see id. at 22–24 (pointing out with particularity fundamental flaws in Dr. Howle’s opinions); In re Mouttet, 686 F.3d 1322, 1332 (Fed. Cir. 2012) (“It is well-established that a determination of obviousness based on teachings from multiple references does not require an actual, physical substitution of elements.”); In re Nievelt, 482 F.2d 965, 968 (CCPA 1973) (“Combining the teachings of references does not involve an ability to combine their specific structures.”). In addition, Patent Owner contends that Yoakim requires that the capsule holder be capable of receiving a set of multiple volume capsules and that there is a “snug fit” to avoid “unbalances.” Sur-reply 8 (citing Ex. 1004 ¶¶ 205, 479, 484, 507, 512). According to Patent Owner, Petitioner does not explain adequately how the use of Jarisch’s “straight chamber” with a capsule holder that does not engage with the side wall of the capsule would allow insertion of multiple volume capsules or permit a “snug fit” in the modified device of Yoakim. Id. at 8–9. Patent Owner’s view that Yoakim discloses the use of certain capsules which might not fit into a device with Jarisch’s non-flared structure is ineffective to undercut the sufficiency of Petitioner’s showing on this point. Petitioner is not seeking a bodily incorporation of Yoakim and Jarisch and, in any event, other embodiments of Yoakim do not require the type of flared capsule identified by Patent Owner. Ex. 1004, Fig. 63. Furthermore, we credit the testimony of Mr. Jobin that one of ordinary skill in the art would have understood how to design the chamber of Yoakim to allow reading of a barcode on the underside of the flange. Ex. 1003 ¶¶ 187–195. With respect to the argument that the use of Jarisch’s design would not allow a snug fit, we are directed to no persuasive evidence that Jarisch’s lack of contact between the capsule side wall and the holder would render the device inoperable or less effective. Resp. 39–40; see Reply 22 (citing Ex. 2019, 36:18–37:6). Indeed, as Petitioner points out, Jarisch indicates that its device, including its capsule holding means, allows the capsule to be successfully driven in rotation. Reply 22 (citing Ex. 1005 ¶ 23).” slip op. at 49
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“That argument is not persuasive. A reference need not identify or discuss another prior art patent or application in order for that reference to be deemed relevant or analogous art. Nor do we endeavor to determine why, or why not, a particular reference is discussed in a prior art reference. The analogous art inquiry focuses on reasonable pertinence and involves assessing the similarities between the claimed invention and the prior art, including the problems addressed and the closeness of the subject matter, as viewed by an ordinarily skilled artisan. Donner Tech., LLC v. Pro Stage Gear, LLC, 979 F.3d 1353, 1360 (Fed. Cir. 2020); see Airbus S.A.S. v. Firepass Corp., 941 F.3d 1374, 1380-81 (Fed. Cir. 2019) (relevant analysis focuses on comparing the disclosed embodiments, function, and structure of the claimed invention to the disclosures of the prior art). Against that backdrop, we reject Patent Owner’s suggestion that the inquiry involves whether the inventors of Jarisch saw a need to discuss Yoakim’s disclosure in Jarisch’s priority document.” slip op. at 45
Patent outcomesUS 10,994,923 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,994,923 - Apple Inc. v. RJ Technology, LLCInstitutedPTAB · Aug 20, 2024 · IPR2024-00597 · APJ Jon B Tornquist · IPR · Institution
The Board instituted review of claims 1–18 on all asserted grounds and granted Apple’s motion to join IPR2023-01183.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“An inter partes review may not be instituted “unless . . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). Having considered the arguments and evidence presented by Petitioner, we determine that Petitioner has demonstrated a reasonable likelihood of prevailing on at least one of the challenged claims of the ’641 patent. Accordingly, we institute an inter partes review as to all the challenged claims of the ’641 patent on all the grounds of unpatentability set forth in the Petition. And, for the reasons set forth below, we grant Petitioner’s Motion for Joinder.” slip op. at 2
- PTAB / AIA Trials › Joinder §315(c) / SAS all-or-nothingJoinder, grantedGranted
“In considering a motion for joinder, and whether such joinder is appropriate, the Board may consider “whether a new ground of unpatentability is raised in the second petition, how the cost and schedule of the first proceeding will be impacted if joinder is granted, and whether granting joinder will add to the complexity of briefing and/or discovery.” Patent Trial and Appeal Board Consolidated Trial Practice Guide November 20197 at 76 (citing Kyocera Corp. v. SoftView LLC, IPR2013-00004, Paper 15 at 4 (PTAB Apr. 24, 2013)).” slip op. at 9
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art “would have had a Master’s degree in material science, chemical engineering, chemistry, or similar field with four years experience designing testing, and building secondary lithium batteries.” Pet. 11 (citing Ex. 1002 ¶ 51). Petitioner further contends that a person of ordinary skill in the art would have been aware of “(1) positive electrode materials, (2) negative electrode materials, (3) separators, (4) electrolytes, (5) charge-discharge parameters, and (6) protection circuits, as well as ‘battery failure modes’ such as plating and the formation of dendrites.” Id. at 11–12 (citing Ex. 1002 ¶¶ 50–51). Upon review of the prior art of record and the Petitioner’s arguments, we adopt Petitioner’s uncontested definition of the person of ordinary skill in the art for purposes of this Decision as it appears consistent with the ’641 patent and the prior art of record.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner provides constructions for the terms “A method for improving . . . characterized in that,” “ratio of positive electrode material to negative electrode material as calculated by a theoretic capacity with a charge cut-off voltage set at 4.2 V” (claim 5), “as calculated by a specific capacity with a charge voltage limited to 4.2 V” (claim 1), and “at least 7500 of capacity” (claim 11). Pet. 8–11. For purposes of this decision, we determine that no claim terms require express construction. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 8
Claim constructioncites Phillips · KSR · GrahamPatents in suitUS 7,749,641 - Nespresso USA, Inc. v. K-Fee System GmbHInstitutedPTAB · Jun 25, 2024 · IPR2024-00299 · APJ James J Mayberry · IPR · Institution
The Board instituted review of claims 1–8 based on a reasonable likelihood that claim 1 is obvious over Yoakim, Jarisch ’929, Rossi, and Rapparini.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“institute review. 35 U.S.C. § 314 (2018); see also 37 C.F.R. § 42.4(a) (2023) (permitting the Board to institute trial on behalf of the Director). To institute an inter partes review, we must determine that the information presented in the Petition shows “a reasonable likelihood that the petitioner would prevail with respect to at least [one] of the claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons set forth below, upon considering the Petition, Preliminary Response, and evidence of record, we institute an inter partes review.” slip op. at 2
- Skill levelSkill level petitioner adoptedOther
“Petitioner contends that a person of ordinary skill in the art would have had “a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products, and experience with sensors for recognizing an identifier.” Pet. 16 (referencing Ex. 1003 ¶ 40; IPR2022-01574, Paper 12, 15). Patent Owner does not dispute Petitioner’s characterization of the level of ordinary skill in the art of the ’910 patent. For purposes of this Decision, based on the prior art, the sophistication of the technology at issue, and Mr. Jobin’s Declaration testimony, we adopt Petitioner’s unopposed definition of the level of ordinary skill. The ’901 patent, as well as the prior art of record, includes systems that use identifiers on a capsule to control the operation of a beverage machine. See, e.g., Ex. 1001, 1:28–34 (“[T]he present invention . . . has an identifier, which allows to individualize the respective portion capsule.”); Ex. 1004 ¶ 25 (discussing the system’s “identification means”); Ex. 1006 ¶ 1 (“The present invention relates in particular to coding supports adapted to store information related to a capsule, capsules associated with/for embedding coding supports, reading and processing arrangements for reading and using such information for preparing a beverage.”); Ex. 1041, code (57) (“The process for controlling the operation of an edible-product making machine [includes] . . . recogni[zing] an” slip op. at 17
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b).” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their ordinary and customary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1312–14 (Fed. Cir. 2005) (en banc) (“We have frequently stated that the words of a claim ‘are generally given their ordinary and customary meaning.’” (quoting Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996)).” slip op. at 18
- Obviousness (§103) › Analogous artAnalogous artOther
“a) Petitioner’s contentions Petitioner contends that Yoakim, Jarisch ’929, Rossi, and Rapparini are “analogous art in the field of portion capsule beverage extraction, each disclosing an invention that may be applied in automatic coffee/expresso machines.” Pet. 37 (referencing Ex. 1004 ¶¶ 2, 3; Ex. 1006 ¶¶ 1, 2; Ex. 1008 ¶ 1; Ex. 1041, 3; Ex. 1003 ¶ 220); cf. In re Bigio, 381 F.3d 1320, 1325 (Fed. Cir. 2004) (“References within the statutory terms of 35 U.S.C. § 102 qualify as prior art for an obviousness determination only when analogous to the claimed invention.”). Patent Owner does not dispute this contention at this stage of the proceeding.” slip op. at 20
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,554,910 - Canon U.S.A., Inc. / Canon Inc. v. Slingshot Printing LLCAll claims unpatentablePTAB · May 20, 2024 · IPR2022-01541 · APJ Jon B Tornquist · IPR · Final written decision
Claims 1–7, 9, 10, 20–22, and 24 are unpatentable as obvious over Hamafuku, Whitman, and Imanaka, with Cleland added for claim 5.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Upon review of the prior art of record, we determine that no claim terms require construction for purposes of this Final Written Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 11
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Upon review of the prior art of record, we adopt Petitioner’s definition of a person of ordinary skill in the art as it is consistent with the prior art of record, but note that neither party contends the outcome of this case depends on whether a person of ordinary skill could include an individual with a degree in Materials Science.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“In this case, there was a known desire to increase nozzle pitch in inkjet printheads, Imanaka’s heater and nozzle configuration had been used in the art to achieve this goal, and there is no suggestion that combining the teachings of Hamafuku, Whitman, and Imanaka was beyond the skill of an ordinarily skilled artisan. See Intel Corp. v. PACT XPP Schweiz AG, 61 F.4th 1373, 1381 (Fed. Cir. 2023). Thus, we credit the testimony of Mr. Curley that one of ordinary skill in the art would have sought to use Imanaka’s heater and nozzle pitch in Hamafuku in order to provide a more compact and higher density printhead. Ex. 1002 ¶¶ 404–05. A conclusion of obviousness requires a reasonable expectation of success. Intelligent Bio-Systems, Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1365 (Fed. Cir. 2016). This inquiry asks whether one of ordinary skill in the art would have had a reasonable expectation of combining the references to achieve what is claimed in the patent-at-issue. Id. at 1367. The inquiry does not look to whether unclaimed elements or functions would or would not also be achieved, or whether “one would reasonably expect the prior art reference to operate as those references intended once combined.” Id.” slip op. at 42
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner
“As noted by Patent Owner, the components of Imanaka are made of silicon-based materials, manufactured using thin film technology. PO Resp. 53–54 (citing Ex. 1008, 6:50–61). We are not persuaded, however, that Imanaka’s preference for silicon-based materials would teach away from, or otherwise discourage, one of ordinary skill in the art from combining Hamafuku, Whitman, and Imanaka. Imanaka does not suggest that failure to use silicon-based materials would result in an inoperable device. Rather, Imanaka states that use of silicon-based materials may “improve the mechanical characteristics” and “reliability” of “the liquid discharge head.” Ex. 1008, 6:50–61. Given the considerable increase in printhead nozzle pitch and print resolution provided by Imanaka’s heater and nozzle pitch configuration, we are not persuaded that a failure to capture the same improvement in mechanical characteristics and reliability from the use of silicon-based materials would prevent one of ordinary skill in the art from implementing Imanaka’s nozzle pitch in Hamafuku and Whitman or counsel against this modification.” slip op. at 41
Patent outcomesUS 7,152,951 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,152,951 - PTAB · Mar 26, 2024 · IPR2023-01382 · APJ Kimberly Mcgraw · IPR · Institution
The Board instituted IPR of claims 1–3 on all asserted grounds, finding a reasonable likelihood that at least one challenged claim would be unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. 35 U.S.C. § 314; 37 C.F.R. § 42.4(a). The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons set forth below, we determine the information presented in the Petition establishes a reasonable likelihood that Petitioner would prevail with respect to at least one of the challenged claims. Accordingly, we institute an inter partes review of all challenged claims of the ’347 patent on all grounds asserted in the Petition. See SAS Inst., Inc. v. Iancu, 138 S. Ct. 1348, 1359–60 (2018); PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (stating that a decision to institute is “a simple yes-or-no institution choice respecting a petition, embracing all challenges included in the petition”).” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“had a “at least a four-year degree in electrical engineering, chemical engineering, physics, or material science or a closely related field, and at least two years of experience in semiconductor device design and/or fabrication, including the processing of semiconductor materials, analysis of device operation, or the development of new device topologies.” Pet. 19 (citing Ex. 1003 ¶¶ 52–53). Petitioner also contends that “[a]dditional education could substitute for professional experience and vice versa.” Pet. 19. Patent Owner does not challenge Petitioner’s definition or offer its own. See generally Prelim. Resp. In light of the record before us, and for purposes of this Decision, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’347 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand and implement the teachings of the ’347 patent and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown”)” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“type gate material of independent claim 1 requires that the “bottom of the ptype gate material is more than 10% wider than the top of the material.” Pet. 19. We begin our analysis with the language of the claims themselves. See Phillips, 415 F.3d at 1312. Here, the claims do not recite any numerical degree of horizontal extension, let alone a requirement that the bottom of the p-type gate material must be more than 10% wider than the top of the material. Thus, the plain language of the claims themselves do not support Petitioner’s proposed construction. Of course, the claims do not stand alone, but rather, must be read in view of the specification, of which they are part. Phillips, 415 F.3d at 1313. Petitioner relies on a numerical value for horizontal extension disclosed in Lidow, which is incorporated by reference in the ’347 patent. Pet. 20 (citing Ex. 1011 ¶¶ 41–42, Fig. 8; Ex. 1003 ¶¶ 70–74). But Lidow’s disclosure of a numerical value (10%) is made in the context of discussing a single embodiment. Ex. 1011 ¶ 41. Lidow does not include a numerical value in its disclosure of other embodiments. See, e.g., Ex. 1011 ¶¶ 43–51.” slip op. at 13
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“Again, Patent Owner’s arguments raise issues that are best resolved on a full record. While we do have some concern’s regarding Petitioner’s asserted reasons to combine all of the prior art references, Petitioner has provided sufficient argument and evidence for purposes of institution that a POSITA would have had reason to manufacture the modified Figure 1A of Saxler by using Beach’s self-aligned technique with Shenoy’s isotropic etching process, and would have had a reasonable expectation of success. Pet. 32 (citing Ex. 1003 ¶¶ 60–62, 93; Ex. 1014 (Xu); Ex. 1021 (Sheppard); Ex. 1015 (Smith); Ex. 1018 (Hu); Ex. 1009 (Shenoy); Widmann (Ex. 1023); Ahn (Ex. 1010); see also Pet. 31–35. For example, Dr. Shealy testifies that a POSITA would have recognized that using Beach’s self-aligned techniques and Shenoy’s isotropic etching process to arrive at Saxler’s non-recessed gate structure would have been a simple and predictable combination in view of Smith’s use of self-alignment techniques to create its stacked gate structure and would have done so to reduce steps and costs while improving reproducibility. Ex. 1003 ¶ 93. We also note that we understand Petitioner’s proposed combination uses a single photomask when etching both the gate metal and the p-type gate material layer, including when etching the gate metal to form a pair of ledges on the p-type gate material below the gate metal. See, e.g., Pet. 48 (stating that it would have been obvious to use one mask to etch the gate metal and cap layer and further stating that using Shenoy’s method of isotropically etching the gate metal would form symmetric undercuts of the photomask). To the extent, the Board’s understanding of Petitioner’s argument is not correct, the parties are urged to address this issue. Finally, Patent Owner asserts that Shenoy is non-analogous art and may not be combined with Saxler or Beach because Shenoy involves electrochemical etching, a highly specialized etching method with little relevance to the process described in the ’347 patent or Saxler. Prelim. Resp. 27.” slip op. at 32
Claim construction§ 103 obviousnesscites PhillipsPatents in suitUS 9,748,347 - PTAB · Mar 26, 2024 · IPR2023-01384 · APJ Jeffrey W Abraham · IPR · Institution
The Board instituted IPR on claims 1–7 and all petitioned grounds, finding a reasonable likelihood that claims 1, 3, and 4 are unpatentable over the asserted obviousness grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“III. CONCLUSION Because Petitioner has demonstrated a reasonable likelihood that at least one challenged claim of the ’335 patent is unpatentable over the prior art of record, we institute an inter partes review of all challenged claims. And because we find some grounds sufficient for institution, we institute on all grounds in the petition. See SAS, 138 S. Ct. at 1353 (2018); PGS Geophysical, 891 F.3d at 1360. determination with respect to the patentability of any challenged claim or any underlying factual or legal issue, including claim construction. IV. ORDER For the reasons given, it is: ORDERED that, pursuant to 35 U.S.C. § 314(a), an inter partes review of claims 1–7 of the ’335 patent is instituted with respect to all grounds of unpatentability asserted in the Petition, commencing on the entry date of this Decision; and FURTHER ORDERED that, pursuant to 35 U.S.C. § 314(c) and 37 C.F.R. § 42.4, notice is hereby given of the institution of trial.” slip op. at 54
- Skill levelSkill level petitioner adoptedDecided for petitioner
“II. ANALYSIS A. Level of Ordinary Skill in the Art Petitioner asserts that a person of ordinary skill in the art would have had “at least a four-year degree in electrical engineering, chemical engineering, physics, or material science or a closely related field, and at least two years of experience in semiconductor device design and/or 1 The relevant sections of the Leahy-Smith America Invents Act (“AIA”), Pub. L. No. 112–29, took effect on March 16, 2013. Because the ’335 patent has an effective filing date prior to the effective date of the applicable AIA amendments, the pre-AIA version of § 103 applies. 2 US 2006/0108606 A1, published May 25, 2006 (Ex. 1007). 3 JP H11-261053, published Sept. 24, 1999 (Ex. 1005 (original language); Ex. 1006 (certified English translation)). 4 US 2007/0007547 A1, published Jan. 11, 2007 (Ex. 1008). 5 R.V. Shenoy, et. al, Effect of Mask Wall Angle on Shape Evolution during Through-Mask Electrochemical Micromachining, J. ELECTROCHEM. SOC., Vol. 143, No. 2, 544, Feb. 1996 (Ex. 1013). device operation, or the development of new device topologies.” Pet. 18 (citing Ex. 1003 ¶¶ 52–53). Petitioner also contends that “[a]dditional education could substitute for professional experience and vice versa.” Pet. 18. Patent Owner does not challenge Petitioner’s definition or offer its own. See generally Prelim. Resp. In light of the record before us, and for purposes of this Decision, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’335 patent and the prior art of record, at this stage of the proceeding we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand and implement the teachings of the ’335 patent and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown”) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)).” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“type gate material of independent claims 1 and 5 requires that the “bottom of the p-type gate material is more than 10% wider than the top of the material.” Pet. 19. We begin our analysis with the language of the claims themselves. See Phillips, 415 F.3d at 1312. Here, the claims do not recite 7 Patent Owner cites to the Lidow-508 patent itself, instead of the published application included in the record as Ex. 1011, which Petitioner cites to. The parties have not identified any difference between the two references. the bottom of the p-type gate material must be more than 10% wider than the top of the material. Ex. 1001, 5:5–6:30. Thus, the plain language of the claims themselves does not support Petitioner’s proposed construction.” slip op. at 13
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“As discussed above, however, we are persuaded, at this stage, by Petitioner’s argument that that Saxler teaches or suggests an operable enhancement-mode device. See § II.D.1.a.i, supra. Additionally, Patent Owner’s argument regarding modifications that “could be detrimental” to certain devices is not only speculation, but also comprised entirely of attorney argument. Finally, Patent Owner does not directly address Petitioner’s arguments and accompanying evidence that a person of ordinary skill in the art would have had reason to combine the teachings of Saxler and Yoshida to take advantage of simplified manufacturing steps and reduced costs. Based on the present record, Petitioner has sufficiently shown that Saxler and Yoshida disclose or suggest all of the limitations in claims 1, 3, and 4, and that a person of ordinary skill in the art would have had a reason to combine the teachings of Saxler and Yoshida with a reasonable expectation of success. Accordingly, we determine Petitioner has established a reasonable likelihood of prevailing on its challenge that claims 1, 3, and 4 are unpatentable as obvious in view of Saxler and Yoshida. For the same reasons as noted above, we decline to address Petitioner’s challenge of claims 2 and 5–7 based on Saxler and Yoshida alone at this stage. See § II.D.1.c, supra.” slip op. at 44
Claim construction§ 103 obviousnesscites PhillipsPatents in suitUS 10,312,335 - PTAB · Mar 20, 2024 · IPR2023-01381 · APJ Jon B Tornquist · IPR · Institution
Instituted IPR of claims 1–12 on all petition grounds; the Board found a reasonable likelihood of success on at least one challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“An inter partes review may not be instituted “unless . . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). Having considered the arguments and evidence presented by Petitioner and Patent Owner, we determine that the information presented in the Petition demonstrates a reasonable likelihood that Petitioner would prevail on at least one of the challenged claims of the ’294 patent. Accordingly, we institute an inter partes review as to all of the challenged claims of the ’294 patent on all of the grounds of unpatentability set forth in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends a person of ordinary skill in the art “would have possessed at least a four-year degree in electrical engineering, chemical engineering, physics, or material science, or a closely related field, and at least two years of experience in semiconductor device design or fabrication, including the processing of semiconductor materials, analysis of device operation, or the development of new device topologies.” Pet. 5–6. Patent Owner does not address the knowledge or education of a person of ordinary skill in the art. On this record, we adopt Petitioner’s unopposed definition of the person of ordinary skill in the art as it appears consistent with the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (holding that the prior art itself can reflect the appropriate level of ordinary skill in the art).” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“Petitioner contends the terms “compensated GaN layer” and “above” require construction. Pet. 12–17; Prelim. Reply 1–5. Patent Owner contends only the term “compensated GaN layer” requires construction. Prelim. Resp. 5–15; Prelim. Sur-reply 1–3. Upon review of the parties’ arguments and evidence, we determine that only the term “compensated GaN layer” requires construction. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“Claims Claim terms are generally given their ordinary and customary meaning, which is the “meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention.” Phillips, 415 F.3d at 1313. Patent Owner does not present evidence that the ordinary meaning in the art of a “GaN layer” is “GaN gate material.” Indeed, the prior art of record discloses multiple GaN layers that do not appear to be “gate material.” Ex. 1006 ¶ 32; Ex. 1005 ¶ 74 (“the channel layer 20 is GaN”); Ex. 1008 ¶¶ 24–25 (noting that the buffer layer and semiconductor layer are GaN). Nor does Patent Owner contend that the term “compensated” requires or implies a particular orientation or location with respect to the gate contact. Thus, by itself, the term “compensated GaN layer” does not require a “compensated GaN gate material.” Rather, Patent Owner contends that given the placement of the “compensated GaN layer” above the barrier layer and below the gate contact, one of ordinary skill in the art would have understood that the claimed “compensated GaN layer” is a “compensated GaN gate material.” Prelim. Resp. 7. We are not persuaded by this argument, at this stage of the proceeding, because the prior art (Uemoto) discloses a compensated GaN layer that is above a barrier layer and below a gate contact, as recited in claim 1, and Patent Owner contends this layer is not a “compensated GaN layer.” Ex. 1006, Fig. 7; Prelim. Resp. 31–32. This tends to suggest that the placement of a “compensated GaN layer” above a barrier layer and below a gate contact, without more, does not necessarily indicate that said layer is part of the gate. In view of the foregoing, on this record, we determine that the language and structure of claim 1 does not support a construction requiring that the “compensated GaN layer” be a “compensated GaN gate material.”” slip op. at 11
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,350,294 - PTAB · Mar 20, 2024 · IPR2023-01383 · APJ Kimberly Mcgraw · IPR · Institution
The Board instituted review of claims 1–5 on all asserted grounds after finding a reasonable likelihood that claim 1 would have been obvious over Yoshida, Beach, and Sheppard.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. 35 U.S.C. § 314; 37 C.F.R. § 42.4(a). The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons set forth below, we determine that Petitioner has sufficiently shown a reasonable likelihood that it would prevail with respect to at least one claim of the ’508 patent. Accordingly, we institute an inter partes review of all challenged claims of the ’508 patent on all grounds asserted in the Petition. See SAS Inst., Inc. v. Iancu, 138 S. Ct. 1348, 1359– 60 (2018); PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (stating that a decision to institute is “a simple yes-or-no institution choice respecting a petition, embracing all challenges included in the petition”).” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“had a “at least a four-year degree in electrical engineering, chemical engineering, physics, or material science or a closely related field and at least two years of experience in semiconductor device design or fabrication, including the processing of semiconductor materials, analysis of device 1 The Leahy-Smith America Invents Act (“AIA”), Pub. L. No. 112–29, 125 Stat. 284 (Sept. 16, 2011), includes revisions to Section 103 that became effective on March 16, 2013. Because the challenged claims issued from an application filed before March 16, 2013, we apply the pre-AIA law to the challenges. See Ex. 1001, code (30). 2 JP H11-261053, published Sept. 24, 1999 (Ex. 1004, pp. 8–11 (original language), pp. 1–7 (certified English translation), p. 12 (certification) “Yoshida”)). All references are to the English translation portion of Ex. 1004. 3 US 2007/0057624, published June 23, 2005 (Ex. 1005, “Beach”). 4 US 7,238,560, issued July 3, 2007 (Ex. 1006, “Sheppard”). 5 US Pub. App. No. 2006/0273347, published Dec. 7, 2006 (Ex. 1007, “Hikita-347”). 6 US Pub. App. No. 2008/0079023, published Apr. 3, 2008 (Ex. 1008, “Hikita-023”). education could substitute for professional experience and vice versa.” Pet. 11 (citing Ex 1003 ¶ 69). Patent Owner does not challenge Petitioner’s definition or offer its own. See generally, Prelim. Resp. In light of the record before us, and for purposes of this Decision, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’508 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand and implement the teachings of the ’508 patent and the prior art.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther
“At this stage of the proceeding, based on the present record, we determine that the claims require that the dielectric layer steps of [1f] must occur before the ohmic contact steps of [1g] but that the claims do not require that the gate structure be formed before the source and drain contacts. Step [1f] recites depositing a dielectric layer; applying a contact photo resistant pattern; etching the dielectric layer to open the drain and source contact area; and removing the contact photo resistant pattern. Ex. 1001, 7:5–9. Thus, it appears that the drain and source contact area recited in step [1f3] is the area where the drain and source contacts are formed. The ohmic contact steps of [1g] are directed to forming the drain and source contacts. As a matter of logic, the drain source contact area must be opened before the drain and source contacts are formed. As such, the dielectric layer steps of and removal of the contact photo resistant pattern––must be performed before the ohmic contact steps of [1g] to form the Ohmic drain and source contacts are performed. Petitioner does not dispute this construction. See Reply 1–9 (disputing whether the gate must be formed before the source and drain, but not disputing that the dielectric layer [1f1] must be deposited before forming the source and drain contacts [1g]).” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“contact is formed after the source and drain contacts are formed––differs from Beach’s process––which appears to form the gate contact at the same time as the ohmic (source/drain). We also acknowledge Patent Owner’s arguments that these two methods are inconsistent and contrary to each other. Prelim. Resp. 20–22. However, Petitioner has provided evidence and argument, supported by declaration testimony, that it would have been obvious to combine Yoshida and Beach to arrive at the subject matter of claim 1. For example, Petitioner asserts that a POSITA would have been motivated to use Beach’s resist pattern 13 as a single gate photo resistant pattern to etch away both Yoshida’s gate contact layer and doped GaN layer in order to remove the second mask step to decrease costs and simplify the manufacturing process, as well as improve gate alignment. Pet. 21 (citing, inter alia, Ex. 1003 ¶¶ 125–126). Petitioner has also provided evidence and arguments, supported by declaration testimony, that a POSITA would have been motivated to use Beach’s resist pattern 13 as a metal photo resistant pattern to etch away Yoshida’s metal Al (ohmic contact metal) deposited on layer 4. Pet. 35 (citing Ex. 1004 ¶¶ 10, 22; Ex. 1003 ¶ 135). These contentions are sufficient, for purposes of institution, to show that a POSITA would have had reason to combine Yoshida and Beach in the manner and arguments, supported by declaration testimony, that a POSITA would have had a reasonable expectation of success in combining the teachings of the prior art to arrive at the claimed invention. Pet. 20. We have considered all of Patent Owner’s arguments to the contrary, and determine they raise issues best resolved on a full record. For all of the foregoing reasons, we determine that Petitioner has sufficiently shown that Yoshida, Beach, and Sheppard teach or suggest all of the limitations of claim 1 and that a person of ordinary skill in the art would have had reason to combine the teachings of the asserted art. Accordingly, we determine that Petitioner has demonstrated a reasonable likelihood of showing that claim 1 would have been obvious over Yoshida, Beach, and Sheppard.” slip op. at 29
Claim construction§ 103 obviousnesscites PhillipsPatents in suitUS 8,404,508 - Amphenol Corp. v. PPC Broadband, Inc.InstitutedPTAB · Mar 20, 2024 · IPR2023-01363 · APJ Jon B Tornquist · IPR · Institution
Instituted IPR on claims 1, 2, and 10–13 because Petitioner showed a reasonable likelihood of prevailing on at least one challenged claim, including obviousness over Holmberg and Battey.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“An inter partes review may not be instituted “unless . . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). Having considered the arguments and evidence presented by Petitioner and Patent Owner, we determine that the information presented in the Petition demonstrates a reasonable likelihood that Petitioner would prevail on at least one of the Challenged Claims of the ’483 patent. Accordingly, we institute an inter partes review as to all the Challenged Claims of the ’483 patent on all the grounds of unpatentability set forth in the Petition.” slip op. at 2
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner contends claim 1 should be construed to require that “the drop cable retain its external jacket as it is routed internally.” Pet. 10. Petitioner contends this construction differs from Patent Owner’s apparent construction in the district court, “which allows the external jacket to be removed as the drop cable enters the DIB and the fibers routed inside the box without the external jacket.” Id. at 10–11. Patent Owner contends Petitioner’s narrower construction requiring the “drop cable” retain its external jacket is incorrect, but contends “the Board need not resolve this claim construction dispute to deny institution because Petitioner’s proposed Grounds 1–5 are all insufficient under” either party’s construction. Prelim. Resp. 9. Upon review of the parties’ arguments and the prior art of record, we determine that no claim terms require express construction for purposes of this decision. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)). We address below, however, whether the recited cable types themselves constitute claim limitations.” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“slack fiber. Prelim. Resp. 33–37. These arguments are not persuasive. First, Petitioner does not propose a bodily incorporation of Battey’s shelf into the device of Holmberg. Rather, Petitioner’s proposed combination retains splice tray 230 of Holmberg and relies on Battey for its disclosure of using a hinge connection for the splice tray. Pet. 40 (asserting that one of ordinary skill in the art “would have found it obvious to modify Holmberg pursuant to Battey, resulting in splice tray 230 moveable relative to main body 216”), 43 (“Such a modification would have been a simple substitution of a hinged connection instead of a fastener.”). Second, although Battey utilizes a fixedly mounted slack basket to store excess cable, we are directed to no disclosure or teaching in Battey that teaches away from using other means of storing slack fiber.” slip op. at 23
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDecided for petitioner
“For the reasons set forth below, we determine that part two of the Advanced Bionics framework has not been satisfied. Thus, we need not address whether part one of the framework is satisfied in view of the alleged cumulative nature of Laporte and Battey.” slip op. at 30
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 9,008,483
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.