- Honeywell International Inc. v. DSM IP Assets B.V.Institution deniedPTAB · Aug 21, 2024 · IPR2024-00493 · APJ Erica A Franklin · IPR · Institution
The Board denied institution because Honeywell did not show a reasonable likelihood that claims 1–9 were unpatentable over any of its three obviousness combinations.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Accordingly, we determine that Petitioner has not shown a reasonable likelihood of prevailing in its obviousness challenge of independent claim 1 or dependent claims 2–9 over the combination of Simmelink and Section 73.1015.” slip op. at 23
- Skill levelOther
“PHOSITA) at the time of the ’532 patent “would have had at least a Bachelor’s degree in the field of chemistry, chemical engineering, polymer chemistry, or materials science and at least three years of relevant work experience in the field of high strength fibers.” Pet. 8 (citing Ex. 1003 ¶ 18). Petitioner adds that individuals with different educational backgrounds could still be of ordinary skill in the art if they have “additional experience [that] compensates for a deficit in their education and experience stated above.” Id. According to Patent Owner, a person or ordinary skill in the art, would have (i) a bachelor’s degree in chemistry, polymer chemistry, materials science, chemical engineering, or biomedical engineering and (ii) three years of experience in designing and manufacturing gel-spun UHMWPE yarns. At this level of skill, a PHOSITA would have a detailed understanding of the information provided in the Technology Background, Section II, supra, including (i) the differences between linear HDPE and UHMWPE, (ii) the history underlying Section 73.1015 and the early failures of the 1960s-era blue, melt-extruded polyethylene sutures, (iii) why the molecular orientation of polyethylene molecules leads to strong yarns in the special case of gel-spun UHMWPE, and (iv) the challenges associated with coloring gel-spun UHMWPE yarns, especially for end-use medical applications. Prelim. Resp. 33–34. We note that the parties’ proposed definitions are largely similar, except that Patent Owner additionally recognizes a Bachelor’s degree in biomedical engineering and requires experience in designing and manufacturing gel-spun UHMWPE yarns. In any event, we do not need to the same under either proposed definition.” slip op. at 6
- Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed patent owner constructionDecided for patent owner
“a skilled artisan would have understood that the “gel spinning” process recited in the claims requires the use of a solvent during the spinning process. Indeed, the Specification describes this term, as follows: Gel spinning is understood to include at least the steps of spinning filaments from a solution of ultra-high molecular weight polyethylene in a spin solvent; cooling the filament obtained to form a gel filament removing at least partly the spin solvent from the gel filament; removing at least partly the spin solvent from the gel filament; and drawing the filament in at least one drawing step before during or after removing spin solvent. Ex. 1001, 2:31–37. We recognize the inventor’s lexicography as dispositive with respect to the meaning of the term “gel spinning.” See Phillips v. AWHCorp., 415 F.3d 1303, 1316 (Fed. Cir. 2005); SciMed Life Sys., Inc. v. Advanced Cardiovascular Sys., Inc., 242 F.3d 1337, 1343–44 (Fed. Cir.” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITADecided for patent owner
“Claim 1 describes gel spinning as the manner by which the filaments comprised in the claimed colored multi-filament yarn are obtained. This, on its face, is a product-by-process claim element because it describes the filament structure being obtained in a particular way, i.e., by gel spinning. See Kamstrup A/S v. Axioma Metering UAB, 43 F.4th 1374, 1382 (Fed. Cir. 2022) (agreeing with the Board that “cast in one piece” is a product-by-process claim element as it describes the structure being cast “in a particular way”). For this element to be limiting, it must impart “structural and functional differences” that distinguish the claimed product from the prior art. See Amgen Inc. v. F. Hoffman-La Roche Ltd, 580 F.3d 1340, 1365–67 (Fed. Cir. 2009). Patent Owner argues persuasively that gel spinning imparts structural and functional differences to the claimed product because the process “creates overlap between polyethylene molecules within the UHMWPE filaments that maximizes the intermolecular Van der Waals interactions, resulting in highly crystalline filaments with high tensile strength.” Prelim. Resp. 38, 22 (citing Ex. 1014, 62–66). According to Patent Owner, “the structure of the gel spun UHMWPE is substantially different from other types of UHMWPE such as compression-molded and ram-extruded UHMWPE used to make joint replacements and other orthopedic implants.” Id. at 38.” slip op. at 9
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,280,532 - Apple Inc. v. RJ Technology, LLCInstitutedPTAB · Aug 20, 2024 · IPR2024-00597 · APJ Jon B Tornquist · IPR · Institution
The Board instituted review of claims 1–18 on all asserted grounds and granted Apple’s motion to join IPR2023-01183.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“An inter partes review may not be instituted “unless . . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). Having considered the arguments and evidence presented by Petitioner, we determine that Petitioner has demonstrated a reasonable likelihood of prevailing on at least one of the challenged claims of the ’641 patent. Accordingly, we institute an inter partes review as to all the challenged claims of the ’641 patent on all the grounds of unpatentability set forth in the Petition. And, for the reasons set forth below, we grant Petitioner’s Motion for Joinder.” slip op. at 2
- PTAB / AIA Trials › Joinder §315(c) / SAS all-or-nothingJoinder, grantedGranted
“In considering a motion for joinder, and whether such joinder is appropriate, the Board may consider “whether a new ground of unpatentability is raised in the second petition, how the cost and schedule of the first proceeding will be impacted if joinder is granted, and whether granting joinder will add to the complexity of briefing and/or discovery.” Patent Trial and Appeal Board Consolidated Trial Practice Guide November 20197 at 76 (citing Kyocera Corp. v. SoftView LLC, IPR2013-00004, Paper 15 at 4 (PTAB Apr. 24, 2013)).” slip op. at 9
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art “would have had a Master’s degree in material science, chemical engineering, chemistry, or similar field with four years experience designing testing, and building secondary lithium batteries.” Pet. 11 (citing Ex. 1002 ¶ 51). Petitioner further contends that a person of ordinary skill in the art would have been aware of “(1) positive electrode materials, (2) negative electrode materials, (3) separators, (4) electrolytes, (5) charge-discharge parameters, and (6) protection circuits, as well as ‘battery failure modes’ such as plating and the formation of dendrites.” Id. at 11–12 (citing Ex. 1002 ¶¶ 50–51). Upon review of the prior art of record and the Petitioner’s arguments, we adopt Petitioner’s uncontested definition of the person of ordinary skill in the art for purposes of this Decision as it appears consistent with the ’641 patent and the prior art of record.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner provides constructions for the terms “A method for improving . . . characterized in that,” “ratio of positive electrode material to negative electrode material as calculated by a theoretic capacity with a charge cut-off voltage set at 4.2 V” (claim 5), “as calculated by a specific capacity with a charge voltage limited to 4.2 V” (claim 1), and “at least 7500 of capacity” (claim 11). Pet. 8–11. For purposes of this decision, we determine that no claim terms require express construction. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 8
Claim constructioncites Phillips · KSR · GrahamPatents in suitUS 7,749,641 - Nespresso USA, Inc. v. K-Fee System GmbHInstitutedPTAB · Jun 25, 2024 · IPR2024-00299 · APJ James J Mayberry · IPR · Institution
The Board instituted review of claims 1–8 based on a reasonable likelihood that claim 1 is obvious over Yoakim, Jarisch ’929, Rossi, and Rapparini.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“institute review. 35 U.S.C. § 314 (2018); see also 37 C.F.R. § 42.4(a) (2023) (permitting the Board to institute trial on behalf of the Director). To institute an inter partes review, we must determine that the information presented in the Petition shows “a reasonable likelihood that the petitioner would prevail with respect to at least [one] of the claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons set forth below, upon considering the Petition, Preliminary Response, and evidence of record, we institute an inter partes review.” slip op. at 2
- Skill levelSkill level petitioner adoptedOther
“Petitioner contends that a person of ordinary skill in the art would have had “a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products, and experience with sensors for recognizing an identifier.” Pet. 16 (referencing Ex. 1003 ¶ 40; IPR2022-01574, Paper 12, 15). Patent Owner does not dispute Petitioner’s characterization of the level of ordinary skill in the art of the ’910 patent. For purposes of this Decision, based on the prior art, the sophistication of the technology at issue, and Mr. Jobin’s Declaration testimony, we adopt Petitioner’s unopposed definition of the level of ordinary skill. The ’901 patent, as well as the prior art of record, includes systems that use identifiers on a capsule to control the operation of a beverage machine. See, e.g., Ex. 1001, 1:28–34 (“[T]he present invention . . . has an identifier, which allows to individualize the respective portion capsule.”); Ex. 1004 ¶ 25 (discussing the system’s “identification means”); Ex. 1006 ¶ 1 (“The present invention relates in particular to coding supports adapted to store information related to a capsule, capsules associated with/for embedding coding supports, reading and processing arrangements for reading and using such information for preparing a beverage.”); Ex. 1041, code (57) (“The process for controlling the operation of an edible-product making machine [includes] . . . recogni[zing] an” slip op. at 17
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b).” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their ordinary and customary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1312–14 (Fed. Cir. 2005) (en banc) (“We have frequently stated that the words of a claim ‘are generally given their ordinary and customary meaning.’” (quoting Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996)).” slip op. at 18
- Obviousness (§103) › Analogous artAnalogous artOther
“a) Petitioner’s contentions Petitioner contends that Yoakim, Jarisch ’929, Rossi, and Rapparini are “analogous art in the field of portion capsule beverage extraction, each disclosing an invention that may be applied in automatic coffee/expresso machines.” Pet. 37 (referencing Ex. 1004 ¶¶ 2, 3; Ex. 1006 ¶¶ 1, 2; Ex. 1008 ¶ 1; Ex. 1041, 3; Ex. 1003 ¶ 220); cf. In re Bigio, 381 F.3d 1320, 1325 (Fed. Cir. 2004) (“References within the statutory terms of 35 U.S.C. § 102 qualify as prior art for an obviousness determination only when analogous to the claimed invention.”). Patent Owner does not dispute this contention at this stage of the proceeding.” slip op. at 20
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,554,910 - PTAB · May 24, 2024 · IPR2023-00861 · APJ Christopher M Kaiser · IPR · Remand
The Board denied institution because Petitioner did not show a reasonable likelihood that any challenged claim was unpatentable under any asserted ground.
RulingsRemand decision- RemandOther
“Accordingly, the Director instructed us to “determine whether Petitioner has demonstrated that Figure 1 of Godefroy ‘is clear on its face’ or would have reasonably suggested the placement of Godefroy’s sacrificial anode ‘within 10 inches’ of the hot liquid inlet.” Id. at 9. “In making this determination,” the Director instructed us to “consider whether the expert testimony provides sufficient ‘technical detail, explanation, or statements supporting why the expert determines that the feature in question was required or would have been obvious based on the prior art disclosure.’” Id. In addition, although the Director’s decision “is limited to [our] application of Hockerson to the grounds in the Petition involving Godefroy,” the Director instructed us also to “consider what effect, if any, this decision has on the other asserted grounds.” Id. Finally, the Director instructed us to “set forth [our] interpretation” of “the limitation ‘within 10 inches of a hot liquid inlet to the radiator.’” Id. at 8 n.4.” slip op. at 4
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“original decision, the Director’s decision, and the evidence currently of record, we determine that Petitioner has not shown a reasonable likelihood that it will prevail in showing that at least one of the challenged claims is unpatentable. Accordingly, we do not institute an inter partes review of any challenged claim based on any ground asserted in the Petition. IV. ORDER For the reasons given, it is: ORDERED that, pursuant to 35 U.S.C. § 314, the Petition is denied, and no inter partes review is instituted.” slip op. at 19
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“evidence. The challenged claims require that a sacrificial anode be placed within a certain distance—10 inches—of the hot liquid inlet, and, because the inlet has some non-zero size, it might be possible for an anode to be within that distance from some parts, but not from all parts, of the inlet. Accordingly, specifying the center axis of the inlet as the point from which to measure the distance to the anode improves on the plain words of the claim in terms of achieving the claim’s objective of placing the anode within a specified distance of the inlet. Moreover, when discussing the distance from the inlet to the anode, the specification of the ’494 patent uses the language “within 10 inches in any direction of the center axis of the inlet connection.” Ex. 1001, 7:61–64. Thus, the intrinsic evidence supports adopting Petitioner’s claim construction. Petitioner’s declarant, Dr. Medlin, relies on Petitioner’s proposed construction. See, e.g., Ex. 1004 ¶¶ 20 (noting that the construction “within 10 inches of the center axis of [a] hot liquid inlet” “ha[s] been adopted by Petitioner”), 96 (“the sacrificial anodes contained in each of the turbulators 2 would be placed within 10 inches of a center axis of a hot liquid inlet to the radiator of Tomosada”), 144 (“A POSITA would understand from Figure 1 that the sacrificial anode 14 is within 10 inches of a center axis of a hot liquid inlet”), 267 (“These teachings would further motivate a POSITA to located the sacrificial anode 12 within 10 inches of a center axis of the hot liquid inlet.”). This support for Petitioner’s proposed construction provides further reason for us to adopt it. Because it is supported by the intrinsic evidence of record, because Patent Owner proposes no alternative construction, and because Petitioner’s expert supports it, we adopt the construction of “within 10 inches of a hot liquid inlet to the radiator” that Petitioner proposes. Thus, we construe this term as “within 10 inches of the center axis of a hot liquid inlet to the radiator.” In other words, when discussing the distance between a hot liquid inlet and a sacrificial anode, we interpret “hot liquid inlet” as “center axis of the hot liquid inlet.”” slip op. at 5
- BurdenNot shown unpatentable
“Inherency may be relied upon in arguing either anticipation or obviousness. Schering, 339 F.3d at 1377 (applying inherency in an anticipation context); Par Pharma. Inc. v. TWI Pharma., Inc., 773 F.3d 1186, 1195–96 (Fed. Cir. 2014) (applying inherency in an obviousness context). In both cases, however, “[t]he mere fact that a certain thing may result from a given set of circumstances is not sufficient.” Therasense, Inc. v. Becton, Dickinson & Co., 593 F.3d 1325, 1332 (Fed. Cir. 2010). Instead, “the limitation at issue necessarily must be present, or the natural result of the combination of elements expressly disclosed by the prior art.” Par Pharma., 773 F.3d at 1195–96. Here, Petitioner has not shown sufficiently that, in Godefroy, the sacrificial anode necessarily is placed within 10 inches of the center axis of the hot liquid inlet. Dr. Medlin testifies that Figure 1 of Godefroy shows that “an entirety . . . or at least a significant portion of the sacrificial anode 14, is within 10 inches of a center axis of the inlet.” Ex. 1004 ¶ 144. But we cannot say that Figure 1 of Godefroy is clear on its face, or reasonably suggests, that this is necessarily the case. There are no dimensions shown on Figure 1, so it is unclear from the figure what the diameter of pipe 12 is. If that diameter is larger than 20 inches, then it simply is untrue that “sacrificial anode 14 is . . . necessarily placed within 10 inches of a center axis of a hot liquid inlet to the radiator,” as Dr. Medlin testifies. Id. ¶ 361. As noted above, neither Petitioner nor Dr. Medlin relies on the hot liquid inlet of Godefroy having any particular diameter, and Godefroy is silent as to the diameter of its inlet. Pet. 69–70; Ex. 1004 ¶¶ 144, 359–361, 381–382, 406–408; Ex. 1008, 1–15. Moreover, as Patent Owner notes, there is a wide range of sizes of radiators, including automobile radiators, available. Prelim. Resp. 3–5; Exs. 2001–2003. In the absence of any testimony or other evidence that tends to show that radiator inlet pipes necessarily have diameters less than 20 inches, Petitioner has not shown sufficiently that the diameter of Godefroy’s inlet pipe is small enough to ensure that any portion of the anode necessarily is within 10 inches of the center axis of the inlet.” slip op. at 11
Claim constructioncites Phillips - Canon U.S.A., Inc. / Canon Inc. v. Slingshot Printing LLCAll claims unpatentablePTAB · May 20, 2024 · IPR2022-01541 · APJ Jon B Tornquist · IPR · Final written decision
Claims 1–7, 9, 10, 20–22, and 24 are unpatentable as obvious over Hamafuku, Whitman, and Imanaka, with Cleland added for claim 5.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Upon review of the prior art of record, we determine that no claim terms require construction for purposes of this Final Written Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 11
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Upon review of the prior art of record, we adopt Petitioner’s definition of a person of ordinary skill in the art as it is consistent with the prior art of record, but note that neither party contends the outcome of this case depends on whether a person of ordinary skill could include an individual with a degree in Materials Science.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“In this case, there was a known desire to increase nozzle pitch in inkjet printheads, Imanaka’s heater and nozzle configuration had been used in the art to achieve this goal, and there is no suggestion that combining the teachings of Hamafuku, Whitman, and Imanaka was beyond the skill of an ordinarily skilled artisan. See Intel Corp. v. PACT XPP Schweiz AG, 61 F.4th 1373, 1381 (Fed. Cir. 2023). Thus, we credit the testimony of Mr. Curley that one of ordinary skill in the art would have sought to use Imanaka’s heater and nozzle pitch in Hamafuku in order to provide a more compact and higher density printhead. Ex. 1002 ¶¶ 404–05. A conclusion of obviousness requires a reasonable expectation of success. Intelligent Bio-Systems, Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1365 (Fed. Cir. 2016). This inquiry asks whether one of ordinary skill in the art would have had a reasonable expectation of combining the references to achieve what is claimed in the patent-at-issue. Id. at 1367. The inquiry does not look to whether unclaimed elements or functions would or would not also be achieved, or whether “one would reasonably expect the prior art reference to operate as those references intended once combined.” Id.” slip op. at 42
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner
“As noted by Patent Owner, the components of Imanaka are made of silicon-based materials, manufactured using thin film technology. PO Resp. 53–54 (citing Ex. 1008, 6:50–61). We are not persuaded, however, that Imanaka’s preference for silicon-based materials would teach away from, or otherwise discourage, one of ordinary skill in the art from combining Hamafuku, Whitman, and Imanaka. Imanaka does not suggest that failure to use silicon-based materials would result in an inoperable device. Rather, Imanaka states that use of silicon-based materials may “improve the mechanical characteristics” and “reliability” of “the liquid discharge head.” Ex. 1008, 6:50–61. Given the considerable increase in printhead nozzle pitch and print resolution provided by Imanaka’s heater and nozzle pitch configuration, we are not persuaded that a failure to capture the same improvement in mechanical characteristics and reliability from the use of silicon-based materials would prevent one of ordinary skill in the art from implementing Imanaka’s nozzle pitch in Hamafuku and Whitman or counsel against this modification.” slip op. at 41
Patent outcomesUS 7,152,951 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,152,951 - Mara Renewables Corporation v. DSM IP Assets, B.V.Institution deniedPTAB · Apr 18, 2024 · IPR2024-00070 · APJ Zhenyu Yang · IPR · Institution
The Board denied institution because the Petition did not show a reasonable likelihood that claims 1–15 were anticipated by Radianingtyas or obvious over either asserted combination.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“We have authority under 35 U.S.C. § 314, which provides that an inter partes review may not be instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons provided below, we determine Petitioner has not demonstrated a reasonable likelihood that it would prevail with respect to at least one claim challenged in the Petition. Accordingly, we deny institution of an inter partes review.” slip op. at 2
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b).” 37 C.F.R. § 42.100(b). Under this standard, we construe the claim term “in accordance with the ordinary and customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” Id.; see also Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc) (holding that the words of a claim “are generally given their ordinary and customary meaning,” which is “the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention, i.e., as of the effective filing date of the patent application”). Claim terms need only be construed to the extent necessary to resolve the controversy. Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011). On this record and for purposes of this Decision, we see no need to construe any claim term.” slip op. at 6
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner does not provide a definition of the level of ordinary skill in the art. See Prelim. Resp. 19. Patent Owner also states that any differences between the parties’ proposed definition of the skill level would not impact its arguments. Id. For purposes of this Decision, we adopt Petitioner’s definition of the skill level because it is consistent with the prior art’s demonstration of the level of ordinary skill at the relevant time. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (holding that the prior art itself can reflect the appropriate level of ordinary skill in the art).” slip op. at 7
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“triglyceride, DHA, and heptadecanoic acid content recited therein. In order to anticipate a claim, a prior art reference “must not only disclose all elements of the claim within the four corners of the document, but must also disclose those elements arranged as in the claim.” NetMoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1370 (Fed. Cir. 2008) (quotation marks omitted). A reference, however, can anticipate a claim “even if it does not expressly spell out all the limitations arranged or combined as in the claim, if a person of skill in the art, reading the reference, would at once envisage the claimed arrangement or combination.” Microsoft Corp. v. Biscotti, Inc., 878 F.3d 1052, 1068 (Fed. Cir. 2017) (quotation marks and brackets omitted). As explained below, here, Petitioner has not shown Radianingtyas discloses a microbial oil comprising the required triglyceride, DHA and heptadecanoic acid content. Specifically, although the exemplified strain ONC-T18 produces oil that meets the claimed triglyceride fraction and heptadecanoic acid level, Petitioner has not shown the same oil contains the recited DHA level.” slip op. at 10
Claim construction§ 102 anticipation§ 103 obviousnesscites PhillipsPatents in suitUS 8,207,363 - PTAB · Mar 20, 2024 · IPR2023-01383 · APJ Kimberly Mcgraw · IPR · Institution
The Board instituted review of claims 1–5 on all asserted grounds after finding a reasonable likelihood that claim 1 would have been obvious over Yoshida, Beach, and Sheppard.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. 35 U.S.C. § 314; 37 C.F.R. § 42.4(a). The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons set forth below, we determine that Petitioner has sufficiently shown a reasonable likelihood that it would prevail with respect to at least one claim of the ’508 patent. Accordingly, we institute an inter partes review of all challenged claims of the ’508 patent on all grounds asserted in the Petition. See SAS Inst., Inc. v. Iancu, 138 S. Ct. 1348, 1359– 60 (2018); PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (stating that a decision to institute is “a simple yes-or-no institution choice respecting a petition, embracing all challenges included in the petition”).” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“had a “at least a four-year degree in electrical engineering, chemical engineering, physics, or material science or a closely related field and at least two years of experience in semiconductor device design or fabrication, including the processing of semiconductor materials, analysis of device 1 The Leahy-Smith America Invents Act (“AIA”), Pub. L. No. 112–29, 125 Stat. 284 (Sept. 16, 2011), includes revisions to Section 103 that became effective on March 16, 2013. Because the challenged claims issued from an application filed before March 16, 2013, we apply the pre-AIA law to the challenges. See Ex. 1001, code (30). 2 JP H11-261053, published Sept. 24, 1999 (Ex. 1004, pp. 8–11 (original language), pp. 1–7 (certified English translation), p. 12 (certification) “Yoshida”)). All references are to the English translation portion of Ex. 1004. 3 US 2007/0057624, published June 23, 2005 (Ex. 1005, “Beach”). 4 US 7,238,560, issued July 3, 2007 (Ex. 1006, “Sheppard”). 5 US Pub. App. No. 2006/0273347, published Dec. 7, 2006 (Ex. 1007, “Hikita-347”). 6 US Pub. App. No. 2008/0079023, published Apr. 3, 2008 (Ex. 1008, “Hikita-023”). education could substitute for professional experience and vice versa.” Pet. 11 (citing Ex 1003 ¶ 69). Patent Owner does not challenge Petitioner’s definition or offer its own. See generally, Prelim. Resp. In light of the record before us, and for purposes of this Decision, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’508 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand and implement the teachings of the ’508 patent and the prior art.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther
“At this stage of the proceeding, based on the present record, we determine that the claims require that the dielectric layer steps of [1f] must occur before the ohmic contact steps of [1g] but that the claims do not require that the gate structure be formed before the source and drain contacts. Step [1f] recites depositing a dielectric layer; applying a contact photo resistant pattern; etching the dielectric layer to open the drain and source contact area; and removing the contact photo resistant pattern. Ex. 1001, 7:5–9. Thus, it appears that the drain and source contact area recited in step [1f3] is the area where the drain and source contacts are formed. The ohmic contact steps of [1g] are directed to forming the drain and source contacts. As a matter of logic, the drain source contact area must be opened before the drain and source contacts are formed. As such, the dielectric layer steps of and removal of the contact photo resistant pattern––must be performed before the ohmic contact steps of [1g] to form the Ohmic drain and source contacts are performed. Petitioner does not dispute this construction. See Reply 1–9 (disputing whether the gate must be formed before the source and drain, but not disputing that the dielectric layer [1f1] must be deposited before forming the source and drain contacts [1g]).” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“contact is formed after the source and drain contacts are formed––differs from Beach’s process––which appears to form the gate contact at the same time as the ohmic (source/drain). We also acknowledge Patent Owner’s arguments that these two methods are inconsistent and contrary to each other. Prelim. Resp. 20–22. However, Petitioner has provided evidence and argument, supported by declaration testimony, that it would have been obvious to combine Yoshida and Beach to arrive at the subject matter of claim 1. For example, Petitioner asserts that a POSITA would have been motivated to use Beach’s resist pattern 13 as a single gate photo resistant pattern to etch away both Yoshida’s gate contact layer and doped GaN layer in order to remove the second mask step to decrease costs and simplify the manufacturing process, as well as improve gate alignment. Pet. 21 (citing, inter alia, Ex. 1003 ¶¶ 125–126). Petitioner has also provided evidence and arguments, supported by declaration testimony, that a POSITA would have been motivated to use Beach’s resist pattern 13 as a metal photo resistant pattern to etch away Yoshida’s metal Al (ohmic contact metal) deposited on layer 4. Pet. 35 (citing Ex. 1004 ¶¶ 10, 22; Ex. 1003 ¶ 135). These contentions are sufficient, for purposes of institution, to show that a POSITA would have had reason to combine Yoshida and Beach in the manner and arguments, supported by declaration testimony, that a POSITA would have had a reasonable expectation of success in combining the teachings of the prior art to arrive at the claimed invention. Pet. 20. We have considered all of Patent Owner’s arguments to the contrary, and determine they raise issues best resolved on a full record. For all of the foregoing reasons, we determine that Petitioner has sufficiently shown that Yoshida, Beach, and Sheppard teach or suggest all of the limitations of claim 1 and that a person of ordinary skill in the art would have had reason to combine the teachings of the asserted art. Accordingly, we determine that Petitioner has demonstrated a reasonable likelihood of showing that claim 1 would have been obvious over Yoshida, Beach, and Sheppard.” slip op. at 29
Claim construction§ 103 obviousnesscites PhillipsPatents in suitUS 8,404,508 - Amphenol Corp. v. PPC Broadband, Inc.InstitutedPTAB · Mar 20, 2024 · IPR2023-01363 · APJ Jon B Tornquist · IPR · Institution
Instituted IPR on claims 1, 2, and 10–13 because Petitioner showed a reasonable likelihood of prevailing on at least one challenged claim, including obviousness over Holmberg and Battey.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“An inter partes review may not be instituted “unless . . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). Having considered the arguments and evidence presented by Petitioner and Patent Owner, we determine that the information presented in the Petition demonstrates a reasonable likelihood that Petitioner would prevail on at least one of the Challenged Claims of the ’483 patent. Accordingly, we institute an inter partes review as to all the Challenged Claims of the ’483 patent on all the grounds of unpatentability set forth in the Petition.” slip op. at 2
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner contends claim 1 should be construed to require that “the drop cable retain its external jacket as it is routed internally.” Pet. 10. Petitioner contends this construction differs from Patent Owner’s apparent construction in the district court, “which allows the external jacket to be removed as the drop cable enters the DIB and the fibers routed inside the box without the external jacket.” Id. at 10–11. Patent Owner contends Petitioner’s narrower construction requiring the “drop cable” retain its external jacket is incorrect, but contends “the Board need not resolve this claim construction dispute to deny institution because Petitioner’s proposed Grounds 1–5 are all insufficient under” either party’s construction. Prelim. Resp. 9. Upon review of the parties’ arguments and the prior art of record, we determine that no claim terms require express construction for purposes of this decision. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)). We address below, however, whether the recited cable types themselves constitute claim limitations.” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“slack fiber. Prelim. Resp. 33–37. These arguments are not persuasive. First, Petitioner does not propose a bodily incorporation of Battey’s shelf into the device of Holmberg. Rather, Petitioner’s proposed combination retains splice tray 230 of Holmberg and relies on Battey for its disclosure of using a hinge connection for the splice tray. Pet. 40 (asserting that one of ordinary skill in the art “would have found it obvious to modify Holmberg pursuant to Battey, resulting in splice tray 230 moveable relative to main body 216”), 43 (“Such a modification would have been a simple substitution of a hinged connection instead of a fastener.”). Second, although Battey utilizes a fixedly mounted slack basket to store excess cable, we are directed to no disclosure or teaching in Battey that teaches away from using other means of storing slack fiber.” slip op. at 23
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDecided for petitioner
“For the reasons set forth below, we determine that part two of the Advanced Bionics framework has not been satisfied. Thus, we need not address whether part one of the framework is satisfied in view of the alleged cumulative nature of Laporte and Battey.” slip op. at 30
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 9,008,483 - Apple Inc. v. RJ Technology, LLCInstitutedPTAB · Feb 23, 2024 · IPR2023-01350 · APJ Jon B Tornquist · IPR · Institution
The Board instituted inter partes review of claims 5–14 on all four asserted obviousness grounds, finding a reasonable likelihood that Apple would prevail on at least one challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“An inter partes review may not be instituted “unless . . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). Having considered the arguments and evidence presented by Petitioner and Patent Owner, we determine that the information presented in the Petition demonstrates a reasonable likelihood that Petitioner would prevail on at least one of the challenged claims of the ’641 patent. Accordingly, we institute an inter partes review as to all the challenged claims of the ’641 patent on all the grounds of unpatentability set forth in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends a person of ordinary skill in the art, as of the earliest possible priority date for the ’641 patent, “would have held a Bachelor’s degree in chemistry or chemical engineering, with at least 4 years of experience in cell design, electrochemical techniques, and battery materials development.” Pet. 4. Petitioner further contends that a “Master’s Degree can substitute[] for some of the relevant experience,” and “[e]quivalent training with battery specific experience can accommodate other degreed fields.” Id. Patent Owner does not dispute Petitioner’s definition, “except noting that other majors may provide equivalent education and experience designing, testing, and building lithium-ion batteries.” Prelim. Resp. 14. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the person of ordinary skill in the art for purposes of this Decision. The parties may further address at trial whether “other majors” should be added to this definition, and whether such a modification would have any impact on the unpatentability analysis in this case.” slip op. at 6
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Neither party contends any terms of the ’641 patent require express construction. Pet. 4–5; Prelim. Resp. 13–14. And, for purposes of this decision, we agree that no claim terms require express construction. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“This argument is not persuasive. Contrary to Patent Owner’s arguments, the Federal Circuit has held that “generic” reasons to combine are not inherently suspect, and may reasonably include a desire to make a device “stronger, cheaper, cleaner, faster, lighter, smaller, more durable or more efficient.” See Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 797 (Fed. Cir. 2021) (quoting DyStar Textilfarben GmbH v. C.H. Patrick Co., 464 F.3d 1356, 1368 (Fed. Cir. 2006)). Regardless, Petitioner’s asserted reasons to combine are specific (improved safety and less deterioration after repeated charging and discharging cycles), as is the proposed combination (implementing Sakamoto’s range of ratios for the positive and negative electrode materials in Yamaki’s lithium ion battery). Pet. 9–12. Identification of specific benefits that are tied to specific elements of specific prior art references is sufficient to support an obviousness ground. See Intel, 21 F.4th at 797.” slip op. at 11
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 7,749,641 - Mara Renewables Corporation v. DSM IP Assets, B.V.Institution deniedPTAB · Feb 23, 2024 · IPR2023-01342 · APJ Jon B Tornquist · IPR · Institution
The Board denied institution because the petition did not show a reasonable likelihood that any challenged claim was anticipated or obvious over the asserted references.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). Having considered the arguments and evidence presented by Petitioner and Patent Owner, we determine that Petitioner has not demonstrated a reasonable likelihood of prevailing on at least one of the challenged claims of the ’959 patent. Accordingly, we deny institution of an inter partes review.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that, as of the earliest claimed priority date of the ’959 patent, an ordinarily skilled artisan “would have had a Master of Science degree in an academic discipline emphasizing chemistry, chemical engineering, or biochemistry, in combination with training or at least two to three years of related work experience with lipid chemistry technologies, including but not limited to lipid extraction technologies.” Pet. 6 (citing Ex. 1003 ¶¶ 63–64). Alternatively, Petitioner proposes that an ordinarily skilled artisan “could have also had a Doctorate degree in a relevant academic discipline with one to two years of related work experience in the same discipline.” Id. Petitioner argues that an ordinarily skilled artisan “would have been familiar with microbial oils” and “would have understood the benefits of polyunsaturated fats (PUFAs), microbial sources for obtaining them, and methods for culturing and extracting oils from those microbial sources.” Id. (citing Ex. 1003 ¶¶ 36–48, 64). Patent Owner does not provide a definition of the level of ordinary skill in the art, but “reserves its right to proffer what it contends to be the appropriate level of ordinary skill in the art should the Board institute review.” Prelim. Resp. 15. Patent Owner asserts, however, that a person of ordinary skill in the art would have a detailed understanding of the information provided in its Technology Background section, including “the expected impact of cellular biomass growth characteristics on the proportion of triglycerides and phospholipids produced during a microbial fermentation.” Id. For purposes of this Decision, we adopt Petitioner’s definition of the skill level of an ordinarily skilled artisan as it is consistent with the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (holding that the prior art itself can reflect the appropriate level of ordinary skill in the art). As to the background knowledge possessed by the ordinarily skilled artisan, we agree that such an artisan would have been aware of methods for culturing and extracting oils from microbial sources, including the impact of growth characteristics on the proportions of triglycerides and phospholipids produced during microbial fermentation. Pet. 6; Prelim. Resp. 15.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner contends that all claim terms of the ’959 patent “should be given their plain and ordinary meaning.” Pet. 3. Patent Owner does not contend that any claim terms require construction. Prelim. Resp. 14–15. For purposes of this Decision, we determine that no claim terms require express construction. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 8
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“3. Analysis In order to anticipate a claim, a prior art reference “must not only disclose all elements of the claim within the four corners of the document, but must also disclose those elements ‘arranged as in the claim.’” NetMoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1370 (Fed. Cir. 2008) (quoting Connell v. Sears, Roebuck & Co., 722 F.2d 1542, 1548 (Fed. Cir. 1983)). Radianingtyas discloses microbial oils with various levels of DHA and arachidonic acid. There is no disclosure of an individual microbial oil, however, that contains at least 45% DHA and 1.5% or less arachidonic acid by weight as required by claim 1. With respect to the level of DHA, although Radianingtyas might be interpreted to disclose that some microorganisms can produce up to 60% DHA,8 Radianingtyas discloses that the DHA content of ONC-T18 is “typical[ly]” 35% of the total intracellular fatty acids, and in each experiment disclosed in Radianingtyas DHA was produced by ONC-T18 at 8 Radianingtyas discloses that “the oil producing microbe can produce a lipid composition comprising from about 25% to about 40% of an omega-3 fatty acid, such as n-3 DHA.” Ex. 1007, 26:31–33. It then gives examples that include 15%, 20%, 45%, 50%, 55%, and 60%, which are outside of the disclosed range. Id. at 26:33–34. Dr. Curtis contends the disclosure as a whole should be read as “from about 15% to about 60% of an omega-3 fatty acid, such as n-3 DHA.” Ex. 1003, 39 n.1. Dr. Curtis identifies no microbe in Radianingtyas, however, that is shown to produce more than 40% DHA, and Radianingtyas expressly notes that the typical DHA content produced by ONC-T18 is 35%. Thus, we question Dr. Curtis’ conclusions regarding the DHA content disclosure of Radianingtyas. levels less than “at least 45%.”9 Ex. 1007, 32:21–25 (noting that the “typical composition of fatty acids” produced by ONC-T18 includes 25% DHA), 34:4–37:14 (noting that the control microorganism produced 13.54%, 19.98%, 18.77%, 18.77%, 21.48%, 28.48%, and 14.13% DHA) (Figure 12), 91 (Table 5) (noting that total DHA produced by ONC-T18 was from 24- 34.2%), 99:22–24 (“Of particular interest is ONC-T18 which produces up to 90% of its C20 to C22 content as DHA which is approximately 35% of the total intracellular fatty acids.”). Thus, we are not persuaded that Radianingtyas discloses microbial oils produced by ONC-T18 that have a DHA content of “at least 45%.” As noted by Petitioner, Radianingtyas provides a definition of “purify” and “purifying,” and notes that when these terms are used, it means that a composition could be, for example, 90% pure. Pet. 11; Ex. 1007, 7:26–8:2. As an example of how the term “purified” may be used, Radianingtyas states “[f]or example, if a disclosed eukaryotic microorganism, for example, produces 35% DHA, this could be further ‘purified’ such that the final lipid composition was greater than 90% DHA.” Id. at 8:2–4. We are directed to no actual microbial oil in Radianingtyas, however, that was purified to have increased levels of DHA. Rather, Petitioner only proffers what Radianingtyas might say if such an oil existed or had been purified to increase levels of DHA.10” slip op. at 12
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,757,959
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.