- Weatherford U.S., L.P v. Halliburton Energy Services, Inc.Some claims unpatentablePTAB · Dec 9, 2025 · IPR2024-00990 · APJ Brent M Dougal · IPR · Final written decision
Claims 11–12 and 14–20 are unpatentable; claims 1–10 and 21–23 are not shown unpatentable. Substitute claims 29–37 are unpatentable, and the motion to amend is denied as to them.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“The level of skill is uncontested. Patent Owner adopts the level of skill identified by Petitioner as: [at] the time of the alleged invention in 2018, a POSITA[2] would have had a B.S. degree in mechanical or petroleum engineering or a similar technical discipline, with at least five years of experience in oil or gas well drilling, completion, and/or subsurface production operations or in technical support of such operations including at least some experience in unconsolidated formations utilizing sand control methods and means. Also,” slip op. at 8
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed
“on embodiments of Yeh with concentric sand screens having nine shunt tubes (six transport tubes and three packing tubes) (Yeh Figures 4A–B) and eccentric sand screens with four shunt tubes (two transport tubes and two packing tubes) (Yeh Figures 8A, 8C). See Pet. 32–37, 39, 41–43. Yet, Petitioner’s reasoning as to why “a higher-pressure shunt tube assembly necessitated greater wall thickness” rests on an unspoken one to one comparison between the shunt tubes of the different systems. See id.; see also Ex. 1003 ¶¶ 291–297 (Petitioner’s declarant comparing possible transport tubes of different pressure regions without considering or addressing any difference in the number of transport tubes). However, the embodiments relied on by Petitioner have different numbers of shunt tubes, and thus the greater wall thickness does not appear to be “necessitated” in the way inferred by Petitioner. Further, Petitioner’s analysis would seem to be most appropriate when comparing two concentric sand screens for different pressure regions, or two eccentric sand screens for different pressure regions. relies on Yeh’s teachings related to a horizontal well bore of 5000 feet for the “concentric screen → crossover tool → eccentric screen” arrangement, as well as, for why the concentric screen needs to be rated for a high pressure. Pet. 32–37, 39, 41–43. Petitioner also refers to these features for why one of skill in the art would combine the teachings of Yeh and Yeh2. Id. at 32. However, on cross-examination, Petitioner’s declarant agreed that it is concentric sand screens having a 6x3 shunt tube design that would provide the noted benefits of being rated for a higher pressure and being more robust (as relied on in the Petition), as compared to eccentric sand screens. Ex. 2013, 42:20–43:8; Sur-reply 4–5. This also exposes another issue with Petitioner’s arguments. Though Petitioner identifies that one of skill in the art would be aware that material choice, wall thickness, and pipe diameter all impact burst pressure of a pipe (Pet. 42 (citing Ex. 1017, 24 (Equation (14))), the Petition essentially ignores the fact that the claims do not require a single pipe in isolation. The claims require two shunt tube assemblies, each surrounding a base pipe within a wellbore. It is uncontested that a wellbore provides a confined space for such a system and thus any change in wall thickness of one pipe can result in a significant impact in the function of the other pipes. We find the testimony of Petitioner’s declarant (see, e.g., Ex. 1003 ¶¶ 290–297) unpersuasive when discussing wall thickness because it focusses on basic considerations of a standalone pipe, without sufficient consideration of the claimed completion assembly with its required pipe and tube structure. PO Resp. 20–26.” slip op. at 17
- Strike new argumentNew argument disregardedDecided for patent owner
“In response to Patent Owner’s argument concerning Yeh’s embodiments relied on in the Petition, Petitioner argues for the first time that Patent Owner’s declarant “conceded, Yeh discloses that both concentric and 47:19–48:21). Petitioner does not provide a citation to Yeh or a citation to where the Petition relies on the same number of shunt tubes between concentric and eccentric screens. The deposition cited by Petitioner discusses Yeh at column 16, lines 26 through 35. However, the Petition does not cite or rely on these teachings of Yeh. Thus, we decline to consider this late argument.4 See 35 U.S.C. § 312(a)(3) (requiring the petition to identify “with particularity . . . the grounds on which the challenge to each claim is based, and the evidence that supports the grounds”); 37 C.F.R. § 42.104(b)(5).” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“Thus, we agree with Petitioner that the combination of Yeh and Yeh2 teaches determining the shunt tube system operating pressures associated with the distal end of the production zone, but also more generally, determining the operating pressures along the entire production zone. With this knowledge of the system operating pressures, Petitioner argues that one of skill in the art would have selected eccentric screens for the distal end of the production zone “at any point at which the slurry pressure dropped below the pressure capacity of the eccentric screen shunt tubes.” Pet. 66 (citing Ex. 1005, 30:16–20; Ex. 1003 ¶ 388). In other words, knowing that the pressure decreases as you approach the toe, Yeh’s low-pressure rated eccentric screens could be used from some point prior to and covering the toe. determined pressure.” PO Resp. 37–38. We disagree. As discussed above, the record supports Petitioner’s position that one of skill in the art would have “understood the need to determine the shunt tube system operating pressure throughout the horizontal wellbore.” Ex. 1003 ¶ 383; see also Pet. 64–65. We find convincing Petitioner’s argument that one of skill with this understanding of the system pressures would select a shunt tube system rated to not only address the distal end, but also to address the needs of the adjacent region, so long as the pressure rating supported such a selection. See Pet. 65–67; Ex. 1003 ¶¶ 385–388.” slip op. at 22
Patent outcomesUS 11,333,007 mixedClaim construction§ 101 eligibility§ 103 obviousness§ 112 disclosurecites GrahamPatents in suitUS 11,333,007 - Anker Innovations Ltd. v. Powermat Technologies Ltd.All claims unpatentablePTAB · Dec 5, 2025 · IPR2024-00994 · APJ Ken B Barrett · IPR · Final written decision
Claims 1–7 and 9–14 are unpatentable as obvious over the asserted combinations of Onishi, Flowerdew, Baarman392, Partovi, and Tocci.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner’s proposed experience of two years in the field of wireless/inductive charging is a bit more specific than Petitioner’s proposal of three years of experience with circuits and “familiarity with power electronics and inductive power transfer circuits.” We, however, discern little material difference between the parties’ proposed definitions. Petitioner’s definition is consistent with the level of ordinary skill reflected in the prior art references of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (recognizing that the prior art itself may reflect an appropriate level of skill in the art). For purposes of this decision, we apply Petitioner’s definition of the person of ordinary skill in the art. We note, however, that were we to adopt Patent Owner’s assessment, the outcome of this Decision would be the same.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionDecided for petitioner
“Even if the Specification identified “linear regulation/control as being a central aim” of the ’696 patent, Patent Owner has offered no persuasive reason why a linear-control-related limitation should be read into independent claim 1, and we decline to do so. Hill-Rom Servs., Inc. v. Stryker Corp., 755 F.3d 1367, 1371 (Fed. Cir. 2014) (“While we read claims in view of the specification, of which they are a part, we do not read limitations from the embodiments in the specification into the claims.” (citing Liebel–Flarsheim Co. v. Medrad, Inc., 358 F.3d 898, 904 (Fed. Cir. 2004))); cf. Ex. 1105, 40 (the District Court, in the parallel litigation, excluding a witness’s testimony that the “substantially different” term requires “allow[ance] for some incremental change (increase or decrease) in frequency while remaining in the near-linear/linear regions” because, inter alia, Powermat “fails to offer any particularized arguments explaining why the ‘allow[ance]’ construction is proper.” (alterations in original)). Patent Owner also relies on dependent claim 2, which depends from independent claim 1. PO Resp. 28–29. Dependent claim 2 adds to claim 1 the requirement that the driver be configured to increase and decrease the transmission frequency when a particular signal is received. See Ex. 1001, 28:47–54. Patent Owner asserts that this means that the driver is configured to increase/decrease the “substantially different” frequency, namely a frequency that lies within the near-linear region of a frequency-amplitude graph, and argues that, “[i]n reading claim 2 as a whole, a POSITA would understand that the ’696 Patent is directed to a linear control technique for predictably regulating power transfer.” PO Resp. 28–29 (citing Ex. 2006 ¶ 101). Even if dependent claim 2 called for linear control as Patent Owner appears to assert, we would not read such a limitation into the underlying independent claim. See Karlin Tech., Inc. v. Surgical Dynamics, Inc., 177 F.3d 968, 971–72 (Fed. Cir. 1999) (“The doctrine of claim differentiation . . . normally means that limitations stated in dependent claims are not to be read into the independent claim from which they depend.”); but see PO Sur-reply 4 (arguing for a narrower interpretation of independent claim 1 because it must be read in the context of the entire patent, which includes dependent claim 2). In light of the parties’ agreement and the Specification’s description” slip op. at 15
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“Dr. Woods testifies that Onishi’s “Paragraph [0180] is unambiguous that FIG. 4 does not illustrate the frequency-response of a single coil in isolation, but instead illustrates the ‘resonance characteristics of the primary coil L1 and the secondary coil L2’ when the coils are brought in electromagnetic proximity of each other for charging—i.e., in an inductively coupled state.” Ex. 1101 ¶ 18. Dr. Woods, in support of his opinion, notes that Onishi’s legend for Figure 4 describes f0 as the “RESONANCE FREQUENCY IN LOAD-CONNECTED STATE.” Id. We find Dr. Woods’s testimony more credible than Dr. Mercier’s. We disagree with Patent Owner’s argument (PO Resp. 35) that Petitioner’s reliance on Onishi’s Figure 4 is misplaced, and we find that Figure 4 discloses a resonant frequency of the inductive couple between the primary and secondary coils, as recited in limitations 1.4 and 1.7.” slip op. at 32
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“We do not find Patent Owner’s arguments persuasive. We agree with Petitioner that Patent Owner’s arguments are incorrectly premised on a hypothetical combination involving the bodily incorporation of the two references’ specific structures. See Pet. Reply 17. “The test for obviousness is not whether the features of a secondary reference may be bodily incorporated into the structure of the primary reference . . . . Rather, the test is what the combined teachings of the references would have suggested to those of ordinary skill in the art.” In re Keller, 642 F.2d 413, 425 (CCPA 1981); see also In re Sneed, 710 F.2d 1544, 1550 (Fed. Cir. 1983) (“[I]t is not necessary that the inventions of the references be physically combinable to render obvious the invention under review.”); In re Nievelt, 482 F.2d 965, 968 (CCPA 1973) (“Combining the teachings of references does not involve an ability to combine their specific structures.”). Rather, “if a technique has been used to improve one device, and a person of ordinary skill in the art would recognize that it would improve similar devices in the same way, using the technique is obvious unless its actual application is beyond his or her skill.” KSR Int’l Co., 550 U.S. at 417. Petitioner’s proposed combination is the application, to Onishi’s charging system, of Flowerdew’s general teaching of the technique of using an alignment mechanism in order to optimize the alignment of the inductive coils and to maximize the inductive coupling. See, e.g., Pet. 15 (“[A] POSITA would have been motivated to implement Onishi in a manner that includes an alignment mechanism as suggested by Flowerdew (e.g., a dished recess or other shaped surface feature, a directional logo/marker, or both) so that the primary and secondary coils would be more readily ‘optimized’ for alignment and the inductive ‘coupling is maximized.’”). Flowerdew teaches, for example, that, with the use of a dished charging surface, the secondary unit “tends to align in one axis” and “[t]his alignment is such that the coupling between a solenoid receive coil in secondary unit 304 and the charging coils of charger 302 is maximized.” Ex. 1005, 11:25–52. Petitioner, with the supporting testimony of Dr. Woods, contends, and we agree, that a person of ordinary skill in the art “would have been sufficiently skilled to implement [the proposed] combination given the predictable techniques disclosed in each reference and the relatively advanced state of the art at the time.” Id. at 17 (citing Ex. 1003 ¶ 55). We determine that Petitioner has shown that the proposed combination teaches or suggests the subject matter of limitation 1.3 and that Petitioner has set forth adequate and persuasive reasons with rational underpinning as to why a person of ordinary skill in the art would have modified Onishi’s system to utilize an alignment mechanism. We also determine, for the reasons stated by Petitioner, that a person of ordinary skill in the art would have had a reasonable expectation of success in making the proposed combination. See Pet. 16–17; Ex. 1003 ¶ 55.” slip op. at 23
Patent outcomesUS 9,048,696 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,048,696 - PTAB · Nov 21, 2025 · IPR2025-00956 · APJ Ryan H Flax · IPR · Institution
The Board instituted IPR on claims 1–12 under all asserted grounds, finding a reasonable likelihood that at least one claim is unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“institute trial in an inter partes review. We institute an inter partes review only if the information presented in the petition filed under 35 U.S.C. § 311, and any preliminary response filed under § 313, shows that there is a reasonable likelihood that Petitioner would prevail with respect to at least one of the claims challenged in the petition. 35 U.S.C. § 314. After reviewing the parties’ submissions in view of the existing record, we conclude that Petitioner demonstrates a reasonable likelihood it would prevail in showing that at least one challenged claim of the ’992 patent is unpatentable under the presented grounds. See Pet. Therefore, we grant institution of inter partes review. Our reasoning is discussed below. A.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“These two proposed definitions of the ordinarily skilled artisan share many consistencies, for example, the types of degrees and experience such a person would have had, but differ in the number of years of experience. Petitioner proposes the ordinarily skilled artisan would have had at least five years of experience and Patent Owner proposes at least three years (which would necessarily include five years, too). Patent Owner also proposes that the ordinarily skilled artisan would have consulted a dentist, oral surgeon, prosthodontist, or periodontist with experience in dental implants and prosthetics. At this point, we find little meaningful difference between the two proposed definitions. In fact, neither does Patent Owner’s witness, Mr. Leinsing, who states that his “opinions would not change under either definition.” Ex. 2011 ¶ 40. Thus, at this stage, we accept and use Petitioner’s proposed definition of the ordinarily skilled artisan, which, unlike Patent Owner’s, does not implicate reliance on the knowledge of people other than the individual ordinarily skilled artisan. Petitioner’s definition appears to comport with the level of skill in the art reflected in the prior art of record and the ’992 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art itself [may] reflect[] an appropriate level” of the ordinary level of skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). This parties may further developed this issue at trial, if desired. C.” slip op. at 13
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“The Board interprets claim terms in an inter partes review using the same claim construction standard that is used to construe patent claims in a civil action in federal district court. 37 C.F.R. § 42.100(b). In construing claims, district courts and the Board here, by default, give claim terms their ordinary and customary meaning, which is “the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention.” Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc).” slip op. at 14
- Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateNot entitled to earlier dateDecided for petitioner
“Here, the first claim limitation at issue is broad, i.e., different thread pattern/profile between a definite and a temporary screw, and the Specification’s and priority applications’ disclosure is narrow and specific, asymmetric buttress style threads in a temporary screw and symmetrical threads in a definite screw (are different). Any apparent predictability in or maturity of the relevant field here must be contrasted with the fact that the Specification, considering the ’992 patent itself or any of the identified priority applications, never once even discusses the (claimed) concept of specifically differing the thread style between a temporary and a definitive screw. Any differences in thread style are not called out by the disclosure, but are described and can be discerned only in relation to the respective threads’ functionality, i.e., Fig. 75’s temporary screw 190 has buttress-style threading so it can be pulled out rather than unscrewed from the abutment; Fig. 9’s definitive screw 75 has male threads that fill the female threads of the abutment 8 for a secure permanent engagement. Ex. 1001, 15:23–30, 21:25–44, 23:3–36; Ex. 1012, 97–98, Figs. 9, 75. And, although it is possible for a single disclosed species to provide written description support for a claimed genus, “a sufficient description of a genus . . . requires the disclosure of either a representative number of species falling within the scope of the genus or structural features common to the members of the genus so that one of skill in the art can ‘visualize or recognize’ the members of the genus.” Ariad, 598 F.3d at 1350; see also Synthes USA, LLC v. Spinal Kinetics, Inc., 734 F.3d 1332, 1344 (Fed. Cir. 2013). That does not appear to be the case here—the present record does not support that the described asymmetrical buttress, serrated style of different temporary screw threading (relative to that of the definitive screw and regardless of the direction of the threads for rotation) is sufficiently representative of the genus’s “different” thread patterns/profiles. See, e.g., Ex. 1006 (a buttress style thread does not function the same as a buttress reverse or 75º joint profile or rounded, or trapezoidal thread).” slip op. at 30
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · GrahamPatents in suitUS 11,937,992 - Tesla, Inc. v. Iqar Inc.Rehearing deniedPTAB · Nov 6, 2025 · IPR2024-00543 · APJ Sean P O’Hanlon · IPR · Rehearing
The Board denied Tesla’s rehearing request and left claims 8 and 18 not shown unpatentable under §103 over Hongo, Obradovich, Niki, and Newstrom.
RulingsRehearing decision- RehearingRehearing, deniedDenied
“II. STANDARD OF REVIEW A party requesting rehearing bears the burden of showing that the decision should be modified. 37 C.F.R. § 42.71(d). The party must identify specifically all matters we misapprehended or overlooked, and the place where each matter was previously addressed in a motion, an opposition, or a reply. Id.” slip op. at 2
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“Petitioner’s counsel during the hearing or any of Petitioner’s arguments and evidence. As confirmed by Petitioner’s counsel, Petitioner relies solely on Newstrom’s disclosure of loading its spatial database 20 into solid state memory via a “wireless connection to [a] server” in asserting that the database “may be hosted on a server that is remote from a vehicle.” Pet. 83 (citing Ex. 1012, 8:26–38; Ex. 1003 ¶ 197). Column 8, lines 27–29 is the only disclosure in Newstrom of a “wireless connection.” Although Petitioner argues that Newstrom’s system communicates wirelessly with the geospatial database while the vehicle is being driven (see Dec. 38 (citing Pet. 83); Tr. 19:20–22), Petitioner relies solely on the single instance of “wireless” in Newstrom’s disclosure to satisfy the recitation that the database (which Petitioner maps to Newstrom’s geospatial database 20) is “remote.” In the Decision, we explained that Petitioner’s reliance on Newstrom’s “wireless connection” and its assertion that the geospatial database may be hosted on a remote server were not persuasive to satisfy Petitioner’s burden to prove the unpatentability of claims 8 and 18 by a preponderance of the evidence, especially given Newstrom’s express disclosure that the geospatial database is located on the vehicle. Dec. 40–42. For example, we stated: Petitioner does not explain adequately why Newstrom’s disclosure that, when first initializing the database manager, the geospatial database is loaded into solid state memory by, for example, wirelessly transferring data from a server means that the geospatial database is remote from the vehicle. Similarly, Petitioner does not explain adequately why Newstrom’s disclosure that the database manager can load new portions of the data into solid state memory as the vehicle location changes means that the geospatial database is remote from the vehicle. Nor does Petitioner’s conclusory contention that “the geospatial database 20 may be hosted on a server that is remote from a vehicle” (Pet. 83 (emphasis added)) apprise us of disclosure that Newstrom’s geospatial database is remote from the vehicle. Dr. Morellas’ testimony is substantially identical to the Petition (see Ex. 1003 ¶197) and, thus, also fails to provide adequate support for Petitioner’s assertions. During the hearing, counsel for Petitioner confirmed that it relied solely on Newstrom’s disclose of the database using a “wireless connection” by which the database manager communicates with the database in arguing that Newstrom’s geospatial database 20 is remote from vehicle 12. Tr. 19:14–24; see also Ex. 1012, 8:27–29. Petitioner, however, fails to explain adequately how such wireless communication indicates that the database is not located on vehicle, especially given Newstrom’s express disclosure (discussed above) that the database is onboard the vehicle.” slip op. at 5
- Strike new argumentNew argument disregardedDecided for patent owner
“Initially, Petitioner’s reliance on assertions made in its Reply, relying on Dr. Morellas’ second declaration, fail to persuade us that we overlooked or misapprehended any arguments made in the Petition. Such post-institution arguments attempting to bolster the Petition are untimely and, thus, improper. See Patent Trial and Appeal Board Consolidated Trial Practice Guide 73 (Nov. 2019).6 Even considering Petitioner’s Reply arguments, however, we are not” slip op. at 7
§ 103 obviousnessPatents in suitUS 10,882,399 - PTAB · Nov 3, 2025 · IPR2025-00827 · APJ Barry L Grossman · IPR · Institution
The Board instituted IPR on claims 1–5, 7–14, 16–19, 22–26, and 28–32, finding a reasonable likelihood that Renisch anticipates at least one challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“We have considered Patent Owner’s arguments, but, on this record, are not persuaded. We recognize that Dr. Sonka provides a different opinion than Petitioner and Dr. Rosen. Dr. Sonka testifies that in his opinion “the distinctions between Renisch and claim 1 go beyond terminology.” Ex. 2014 ¶ 79. At this stage, in the absence of a full record, we need not record, it appears that Renisch discloses the elements of limitation [1(c)] at paragraphs 26–31, where it discloses obtaining a scanned 3D image of a fuller anatomy, i.e., a segmentation map, and then using a segmentation unit (76) to define the boundaries of anatomical structures of interest within that fuller anatomy, i.e., creating a plurality of segmentation masks, using a library, models, clustering, edge detection, region growing, neural networks, and/or an atlas of normal anatomical structures, and then identifying hot spots of interest within those anatomical structures of interest, and identifying organs with lesions and those without. Ex. 1005 ¶¶ 26–31. Based on the record before us and the specific disclosures in Renisch, as discussed in this Decision, we determine that Petitioner has met the “reasonable likelihood” standard necessary to institute an inter partes review proceeding. Although we address only Ground A and claims 1 and 10 herein for the purposes of institution, as noted above, we will address all asserted grounds and challenged claims in any final decision.” slip op. at 20
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Ltd., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). We do not perceive a need to construe any claim limitation at this time. This, however, does not preclude the parties from arguing proposed constructions of the claims during trial. Indeed, the parties are hereby given notice that any disputed claim construction, in general, should be addressed at trial and, if so, should be addressed clearly in a designated section of briefing rather than relegated to arguments on the merits of patentability. Claim construction, if necessary, will be determined at the close of the evidentiary record and after any hearing. slip op. at 15
- BurdenDecided for petitioner
“Compliance with the Particularity Requirements of 35 U.S.C. § 312(a)(3) Patent Owner asserts that the Petition fails to meet the particularity requirements of 35 U.S.C. § 312(a)(3). Prelim. Resp. 18–26. According to Patent Owner, “Petitioner’s excessive internal cross-referencing impermissibly forces the Board and Patent Owner to piece together scattered portions of the Petition (and exhibits).” Id. at 26. Patent Owner concludes that “the Petition fails to adequately map the references to the claim elements with particularity.” Id. We disagree. Using claims 1 and 10 as an example, Petitioner asserts: Claim 10 recites a “system for automatically processing 3D images” that is substantively identical to the “method for automatically processing 3D images” recited in claim 1, addressed above. Whereas claim 1 (the method claim) recites a series of steps, each performed “by a processor,” claim 10 (the system claim) recites a “processor” with stored instructions that perform the same steps recited in claim 1. Similarly, dependent claims 11–14, 16, and 26 are substantively identical to dependent claims 2–5, 7, and 19. Pet. 41–42. Claims 1 and 10 contain similar elements and limitations. Petitioner’s reference, for example, in the Petition’s analysis of claim 10, back to the analysis of claim 1 concerning nearly identical elements and limitations (id. at 42) is a matter of efficiency and is sufficiently clear for us to determine the basis for Petitioner’s challenges. We determine that the Petition does not violate the statutory requirement for particularity.” slip op. at 16
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“We have considered Patent Owner’s arguments, but, on this record, are not persuaded. We recognize that Dr. Sonka provides a different opinion than Petitioner and Dr. Rosen. Dr. Sonka testifies that in his opinion “the distinctions between Renisch and claim 1 go beyond terminology.” Ex. 2014 ¶ 79. At this stage, in the absence of a full record, we need not record, it appears that Renisch discloses the elements of limitation [1(c)] at paragraphs 26–31, where it discloses obtaining a scanned 3D image of a fuller anatomy, i.e., a segmentation map, and then using a segmentation unit (76) to define the boundaries of anatomical structures of interest within that fuller anatomy, i.e., creating a plurality of segmentation masks, using a library, models, clustering, edge detection, region growing, neural networks, and/or an atlas of normal anatomical structures, and then identifying hot spots of interest within those anatomical structures of interest, and identifying organs with lesions and those without. Ex. 1005 ¶¶ 26–31. Based on the record before us and the specific disclosures in Renisch, as discussed in this Decision, we determine that Petitioner has met the “reasonable likelihood” standard necessary to institute an inter partes review proceeding. Although we address only Ground A and claims 1 and 10 herein for the purposes of institution, as noted above, we will address all asserted grounds and challenged claims in any final decision.” slip op. at 20
Claim construction§ 102 anticipationDiscretionary denialcites PhillipsPatents in suitUS 11,941,817 - PTAB · Oct 16, 2025 · IPR2025-00776 · APJ John G New · IPR · Institution
Instituted review of claims 9, 11, 32–58, 60–62, and 64–67 on all remaining petition grounds, after finding a reasonable likelihood that claim 9 is unpatentable over Thomas and Faucette.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“For the reasons set forth below, we determine that Petitioner has demonstrated that there is a reasonable likelihood that at least one of claims 9, 11, 32–58, 60–62, and 64–67 of the ’802 patent is unpatentable, and we on the Grounds set forth in the Petition.” slip op. at 2
- Settled expectationsOther
“Patent Owner also filed a Request with the Acting Director of the USPTO seeking discretionary denial of institution of inter partes review (Paper 6, the “Request”). Petitioner subsequently filed a brief opposing Patent Owner’s Request (Paper 8). On September 3, 2025, the Acting Director denied Patent Owner’s Request for discretionary denial of institution of inter partes review and referred the case to the panel for an institution decision on the merits (Paper 11).” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner asserts that a person of ordinary skill would have an M.D. or a Ph.D. degree in virology, immunology, and vaccinology, and at least 3 years of experience in one or more of the research, design, development, and testing of antiviral vaccines. Pet. 17. Petitioner asserts that a person of ordinary skill may be part of a multidisciplinary team having such experience. Id. (citing Ex. 1002 ¶ 81). Patent Owner does not dispute the level of skill asserted by Petitioner.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Neither party requests construction of any claim terms. Petitioner asserts that all claim terms should be given their ordinary and customary meaning, and Patent Owner does not disagree. See Pet. 17. Accordingly, we find, for the purposes of this Decision, that no terms of the challenged claims requires construction beyond the ordinary and customary meaning of the terms, as understood by a person of ordinary skill in the art at the time of the invention. Phillips, 415 F.3d at 1312–13; see also Vivid Techs., Inc. v. construes claims only to the extent necessary to resolve a dispute).” slip op. at 10
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · GrahamPatents in suitUS 11,730,802 - PTAB · Oct 14, 2025 · IPR2025-00685 · APJ John G New · IPR · Institution
The Board instituted IPR on claims 1–23 and all petitioned grounds, finding a reasonable likelihood that the claims are obvious over Wei and Liu.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Summary Based upon the record as presently developed, we conclude that Petitioner has met its burden of showing a reasonable likelihood of showing at trial that at least claim 1 of the ’370 patent is obvious over the cited prior art. Because we determine that Petitioner has demonstrated a reasonable likelihood of success at trial in showing that at least one claim is unpatentable on at least one of the stated Grounds, we institute inter partes review of all challenged claims of the ’370 patent, based on all of the remaining grounds identified in the Petition. See 37 C.F.R. § 42.208(a); SAS Inst., Inc. v. Iancu, 584 U.S. 357, 371 (2018); PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (interpreting the statute to require “a simple yes-or-no institution choice respecting a petition, embracing all challenges included in the petition”).” slip op. at 44
- Skill levelSkill level board ownOther
“appears to be generally consistent with the level of skill presented in the cited prior art. See generally, e.g., Exs. 1005–1008; see also Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art itself may reflect an appropriate level of skill in the art). However, at this point we reject the portion of Petitioner’s proposed definition that includes having “access to other individuals with that knowledge and experience,” as not reflecting the individual level of skill of a given skilled artisan. See, e.g., Custom Accessories, Inc. v. Jeffrey-Allan Indus., Inc., 807 F.2d 955, 962 (Fed. Cir. 1986) (holding that “[t]he person of ordinary skill is a hypothetical person who is presumed to be aware of all the pertinent prior art. The actual inventor’s skill is not determinative”) (emphasis added, footnotes omitted). Consequently, and for the purposes of this Decision, we adopt Petitioner’s proposed definition as defining a person of ordinary skill in the art as a person who would have had “a Ph.D. in immunology, molecular biology, cellular biology, or a similar field, or an M.D. with similar experience, and would further have had at least five years of experience with antibodies and antibody engineering.”” slip op. at 6
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Plain and ordinary meaningOther
“Petitioner states that no term of the challenged claims requires construction to resolve the challenges in this Petition. Pet. 32. Patent Owner does not contest Petitioner’s assertion. See generally Prelim. Resp. We find, for the purposes of this Decision, that no terms of the challenged claims require construction beyond the ordinary and customary meaning of the terms, as understood by a person of ordinary skill in the art at the time of the invention. Phillips, 415 F.3d at 1312–13.” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“We find, based upon the present record and for the purposes of this Decision, that Petitioner has sufficiently established that a person of ordinary skill in the art would have been motivated to combine the teachings of Wei and Liu to determine the activity and suitability of Liu’s humanized anti- EGFR antibodies in an ADC. We acknowledge that Liu is silent regarding the pH selectivity or tissue preference of its binding affinity, but Patent Owner points to no prior art reference that would have informed a skilled artisan upon this point or that would have discouraged a person of ordinary skill in the art from combining the references. See fn.7, supra. And, even if a skilled artisan might have recognized that Liu’s humanized cetuximab might have been potentially problematic if it failed to show pH-selective activity like Wei’s Y104D, the mere fact that some disadvantage may come with an advantage when combining prior art does not foreclose their combination under § 103. Medichem, S.A. v. Rolabo S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006). In the instance of Liu’s humanized anti-EGFR antibody, a person of ordinary skill in the art would have recognized that its advantages (enhanced activity against tumor cells compared to chimeric cetuximab, thus requiring smaller dosages) could balance or outweigh its possible disadvantages (e.g., possible activity against non-tumor cells). Furthermore, it is in the nature of scientific research to continue to try new substitutions in drug therapy, even if a promising candidate has been discovered. As the Supreme Court stated in KSR: When there is a design need or market pressure to solve a problem and there are a finite number of identified, predictable solutions, a person of ordinary skill has good reason to pursue the known options within his or her technical grasp. If this leads to the anticipated success, it is likely the product not of innovation but of ordinary skill and common sense. In that instance the fact that a combination was obvious to try might show that it was obvious under § 103. 550 U.S. at 421.” slip op. at 39
Claim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 10,792,370 - CQV Co., Ltd. v. Merck Patent GmbHNo claims unpatentablePTAB · Oct 14, 2025 · PGR2021-00054 · APJ Kristina M Kalan · PGR · Remand
Claims 1–22 were not shown unpatentable because Sample C was not proven publicly available as prior art, and the original decision found the remaining grounds insufficient.
RulingsRemand decision- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication not establishedNot shown unpatentable
“We agree with Patent Owner that Petitioner’s evidence in Kuntz (Ex. 1026), the Annual Report (Ex. 1028), Masuko (Ex. 1029), and Pfaff (Ex. 1034) is insufficient to show that Xirallic® Sample C was available to the public before the effective filing date of the ’861 patent. Petitioner has not asserted, nor do we find, that any of these documents refer to or describe the lot of Xirallic® from which Sample C was taken. See Final Dec. 26. Kuntz, the Annual Report, Masuko, and Pfaff may support a finding that the Xirallic® line of products was available to the public, but these documents do not support a finding that the lot of Xirallic® from which Sample C was taken was available to the public. We also agree with Patent Owner that the Technical Data Sheets (Exs. 1005–1010), Certificates of Analysis (Exs. 1011–1017), and Material Safety Data Sheet (Ex. 1025) are insufficient to show that Xirallic® Sample C was available to the public. Petitioner has not asserted, nor do we find, that any of these documents refer to or describe the lot of Xirallic® from which Sample C was taken. See Final Dec. 26–27. Regardless of how the Technical Data Sheets were used in the Opposition against the European counterpart of the ’861 patent (Exs. 1040, 1041) and during the prosecution of the application from which the ’861 patent issued (Ex. 1003, 102–104), the Technical Data Sheets do not refer to or describe the lot of Xirallic® from which Sample C was taken. Moreover, as noted by Patent Owner, the Technical Data Sheets (Exs. 1005–1010) indicate that they are “preliminary” and Petitioner has not provided any evidence that the Technical Data Sheets were ever issued to the public, as opposed to just issued internally. See PO Resp. 18–19. We also find persuasive Patent Owner’s argument that the Technical Data Sheets are preliminary because other, later-dated technical data sheets (Exs. 2012, 2013) lack the “preliminary” label and list characteristics that are different from those in Exhibits 1005–1010. See PO Resp. 19 (comparing, e.g., Ex. 1009 and Ex. 2013; Ex. 1005 and Ex. 2012). The Technical Data Sheets may support a finding that the Xirallic® products they describe existed as of the dates on the documents, but they do not support a finding that the lot of Xirallic® from which Sample C was taken was available to the public.” slip op. at 20
- Expert testimonyPetitioner expert discountedPatent owner expert creditedOther
“witnesses. See Elbit Systems of Am., LLC v. Thales Visionix, Inc., 881 F.3d 1354, 1358 (Fed. Cir. 2018) (citing Trs. of Columbia Univ. v. Illumina, Inc., 620 F. App’x 916, 922 (Fed. Cir. 2015); Inwood Labs., Inc. v. Ives Labs., Inc., 456 U.S. 844, 856 (1982)). We have reviewed the witness testimony in the record and, more particularly, Mr. Choi’s deposition answers regarding Petitioner’s purchase of the lot of Xirallic® from which Sample C came. We find that Mr. Choi’s responses cast doubt on the credibility of his declaration testimony, namely with regard to the public availability of Sample C. Mr. Choi represented that he was involved in the purchase of the lot of Xirallic® from which Sample C was taken. Ex. 2011, 48:1–23. Mr. Choi stated that he instructed Petitioner’s marketing team manager to buy the sample from a distributor of Patent Owner’s products located in Europe. Id. at 48:24–49:4. Mr. Choi stated that he has evidence of the transaction, but refused to reveal the name of the company from which Petitioner purportedly purchased the lot of Xirallic® (id. at 49:5–50:3) and refused to produce an email in his possession that would corroborate his testimony regarding Petitioner’s acquisition of the product (id. at 50:8–16, 51:10–23). Mr. Choi represented that he does not remember how much Petitioner paid for Sample B. Id. at 56:4–5. Mr. Choi admitted that the entity from which Petitioner acquired the lot of Xirallic® from which Sample C was taken is “not currently a Merck distributor” (Ex. 2011, 50:4–7) and was not “a Merck distributor at the time” that “samples B and C were purchased” (id. at 51:25–52:2). According to Mr. Choi, the company is a “former distributor” of Patent Owner’s products. Id. at 52:3–6. Mr. Choi did not know, according to his testimony, when that unnamed entity first obtained the lot of Xirallic® (id. at 52:7–10) and he stated that he did not have personal knowledge of how the entity obtained the lot of Xirallic® (id. at 52:12–19). Instead, Mr. Choi assumed the entity was “able to obtain the sample through the routine course or process” the entity uses “to take samples or get samples.” Id. at 52:12–19. Mr. Choi believed the sample of Xirallic® from which Sample C was taken was sealed when Petitioner received it because samples from dealers are sealed, and he remembered observing that the package was from a dealer. Id. at 52:24– 54:25. However, Mr. Choi admitted that he did not obtain a technical data sheet or certificate of analysis for the lot of Xirallic® from which Samples B and C were taken. Id. at 59:6–11. Mr. Choi also answered questions regarding Petitioner’s purchase of Samples D and H. Ex. 2011, 62:20–66:8, 67:7–9, 73:12–13, 73:17–22. Similar to his testimony regarding Samples B and C, Mr. Choi admitted withholding an email regarding the purchase of the lot of Xirallic® from which Sample D was taken. Id. at 62:20–63:9. Mr. Choi also admitted that he did not know how Akzo USA or Axalta obtained the Xirallic® the companies sold to him, and admitted that Akzo USA was not a distributor of Patent Owner’s products at the time Petitioner purchased the product. Id. at 63:10–66:8, 73:17–22. Mr. Choi also admitted that Petitioner did not pay Akzo USA for the lot of Xirallic® from which Sample D was taken, and did not pay Axalta for the lot of Xirallic® from which Sample H was taken. Id. at 67:7–9, 73:12–13. Although Petitioner presents declaration testimony from Mr. Choi representing that he purchased the lot of Xirallic® from which Samples B and C were taken in October 2011 (Ex. 1004 ¶ 16), Mr. Choi’s declaration testimony lacks corroborating evidence, and his deposition testimony does not support that the product was available to the public, as we found in our Final Written Decision. See Final Dec. 27–28. Notably, Petitioner produced corroborating evidence for Mr. Choi’s acquisition of Samples A, H, and I. See Ex. 1004 ¶¶ 13 (citing Ex. 1047), 18 (citing Exs. 1024, 1025). However, Mr. Choi withheld similar evidence for the Xirallic® lots from which Samples B, C, and D were taken. See Ex. 2011, 50:8–16, 51:10–23, 62:20– 63:9; Final Dec. 28. As Patent Owner argues, there is “no information to determine when a contract was established, that there was consideration for the exchange, that the product was available to be delivered when the alleged transaction took place, or even when the product was delivered. Choi has no memory of what was paid for the product.” Sur-Reply 24–25; see also PO Resp. 13–14; PO Br. Rem. 2–4.” slip op. at 34
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“Based on the evidence discussed above, we are not persuaded that Petitioner has shown by a preponderance of the evidence that Sample C was available to the public. Regardless of whether a company avoids wasting shelf life of its products (Ex. 1004 ¶¶ 15–16), there is no persuasive evidence in the record showing that the lot of Xirallic® from which Sample C was taken was released from quality control and then made available to the public by Patent Owner. Mr. Choi’s testimony shows that Petitioner obtained the lot of Xirallic® from which Sample C was taken in an atypical manner (i.e., not from Patent Owner or one of Patent Owner’s current distributors) (Ex. 2011, 49:5–50:7, 50:8–16, 51:10–23, 51:25–52:6, 52:12– 19), and there is no evidence in the record to show that the lot of Xirallic® was intended for sale, rather than for experimental use only or for some other restricted use. Accordingly, we determine Petitioner has not demonstrated by a preponderance of the evidence that Sample C qualifies as prior art against the ’861 patent, and we determine that Petitioner has not shown by a preponderance of the evidence that the ’861 patent is unpatentable over the grounds relying on Sample C.” slip op. at 38
Patent outcomesUS 10,647,861 not shown unpatentable§ 102 anticipation§ 103 obviousnessPatents in suitUS 10,647,861 - Prime Time Toys LLC / Prime Time Toys Ltd. et al. v. Spin Master, Inc.No claims unpatentablePTAB · Oct 10, 2025 · IPR2023-01339 · APJ Brent M Dougal · IPR · Final written decision
Claims 4–9, 12, and 14 were not shown unpatentable because Petitioner failed to establish a reason to combine Peev and Spitballs.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedOther
“We agree that the three definitions are similar. The parties do not advocate for any particular definition. We also determine that no distinction between the definitions is material to this Decision. As such, we do not repeat all three definitions and accept Patent Owner’s definition as most closely fitting the legal requirements: a bachelor’s degree in mechanical engineering, industrial design, or equivalent, with at least one year of relevant experience designing projectile launching systems but would also be a member of a team, which would include a person with a bachelor’s in materials science, chemistry, or equivalent (e.g., chemical engineering), or has at least one year experience working with materials for use in consumer products equivalent work experience may substitute for educational experience, and vice versa” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Neither Petitioner or Patent Owner advocate for the construction of any particular claim term. Pet. 20–21; see generally PO Resp. We determine that no terms require express construction. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 8
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable
“conducting this kind of basic muzzle energy analysis—a conventional, even industry standard technique at the time—would not have concluded that the polymer balls that Spitballs teaches are a safer form of ammunition simply because they are softer than lightweight airsoft rounds,” because the record supports it. Ex. 2015 ¶ 59. slip op. at 12
- Obviousness (§103) › Objective indicia / secondary considerationsNot reached
“that softer ammunition was a possible solution and that Vat19 shows Spitballs exploding on contact with a person without harm. Reply 28–30 (citing Paper 12, 16–17; PO Resp. 63). However, we agree with Patent Owner, that Kim and Vat19 do not disclose all of the limitations of the claims. PO Resp. 61–62; PO Sur-reply 26; Ex. 1004, 302:7–22; Ex. 1022, 8, 9; Ex. 1024; Ex. 2007, 100 (ALJ concluding “there is no disclosure that [Kim’s] gel material is a SAP”); Ex. 2015 ¶¶ 236–239. Petitioner makes no assertions to the contrary. See Pet. 57–60; Reply 28–30. As discussed above, the full record does not support that one of ordinary skill in the art would have combined Peev and Spitballs for the reasons asserted by Petitioner. Petitioner’s insufficient evidence of simultaneous invention does not overcome that deficiency.” slip op. at 21
Patent outcomesUS 8,640,683 not shown unpatentableClaim construction§ 103 obviousnesscites GrahamPatents in suitUS 8,640,683 - Prime Time Toys LLC / Prime Time Toys Ltd. et al. v. Spin Master, Inc.No claims unpatentablePTAB · Oct 10, 2025 · IPR2023-01348 · APJ Neil T Powell · IPR · Final written decision
The Board held claims 2, 3, 5–15, 17, and 19–21 not shown unpatentable over Spitballs and Peev because the evidence did not establish an obvious reason to use the SAP ammunition in Peev’s airsoft gun.
RulingsFinal written decision- Adverse judgmentAdverse judgmentOther
“After the Petition was filed, Patent Owner disclaimed independent claim 1 and dependent claim 4 of the ’282 patent. Prelim. Resp. 26; Ex. 2013. Accordingly, we need not reach Petitioner’s challenges to claims 1 and 4. E.g., 37 C.F.R. § 42.107(e). Thus, the remaining challenged claims are claims 2, 3, 5–15, 17, and 19–21.” slip op. at 2
- Skill levelSkill level board ownOther
“that were proposed in the ITC proceeding as “similar” and noting the ITC ALJ’s determination that “all of the proposals are appropriate,” Petitioner does not argue for the application of any particular level of skill in the art in this proceeding. Pet. 20 (citing Ex. 1015, 8). We too find the definitions advanced in the ITC proceeding similar. Indeed, any differences between the definitions do not rise to a level that would affect our analysis of whether the Petition and associated evidence are sufficiently persuasive for purposes of institution. In our view, the foregoing level of ordinary skill in the art proposed by Patent Owner in the ITC proceeding best fits the legal requirements. Accordingly, we adopt and apply that level of ordinary skill in the art in our analysis of the merits.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“The parties’ arguments and evidence do not raise any issues that necessitate an express claim construction in order to determine whether Petitioner has demonstrated by a preponderance of the evidence the unpatentability of at least one of the challenged claims. Accordingly, we need not and do not expressly construe any claim language. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 11
- Expert testimonyPetitioner expert discountedPatent owner expert creditedDecided for patent owner
“success in an airsoft gun such as Peev, including rubber, cork, foam, and soft plastics, such as SAPs.” Ex. 1016 ¶ 78; Pet. 37. For multiple reasons, this testimony fails to support Petitioner’s suggestion that using SAP ammunition in Peev’s airsoft gun was among a finite number of identified, predictable solutions. For example, because Mr. Delman does not support this testimony with objective supporting evidence, it is not entitled to persuasive weight in Petitioner’s favor. Ex. 1016 ¶ 78; 37 C.F.R. § 42.65(a) (“Expert testimony that does not disclose the underlying facts or data on which the opinion is based is entitled to little or no weight.”). Additionally, even if Mr. Delman substantiated his view that an ordinarily skilled artisan “could have considered” SAPs as airsoft ammunition, that would not persuade us that SAPs were identified, predictable solutions for airsoft ammunition.” slip op. at 17
Patent outcomesUS 8,371,282 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,371,282
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.