- CMS Cepcor Ltd. / CMS Cepcor Americas LLC v. Sandvik Intellectual Property ABNo claims unpatentablePTAB · Apr 16, 2026 · IPR2024-01381 · APJ Arthur M Peslak · IPR · Final written decision
Claims 1–14 were not shown unpatentable because Polinski and Piepho do not teach the claimed tapered region extending from the shaft’s second end, and Petitioner did not establish adequate motivation to combine.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for patent owner
“Petitioner argues that a person of ordinary skill in the art (“POSITA”) relating to the ’090 patent would have had “a bachelor’s degree in mechanical engineering or a related field, and at least 2 years of experience with industrial equipment design and development.” Pet. 3 (citing Ex. 1002 ¶ 29). Petitioner further contends that one of ordinary skill “may also have a combination of more formal education and less work experience or a combination of less/different formal education and more work experience.” Id. In the Patent Owner Response, Patent Owner states that it “does not object to the defined level of skill in the art.” PO Resp. 12 (citing Pet. 3). appears consistent with the problems addressed in the ’090 patent and the prior art.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“challenge, the crux of the parties’ dispute revolves around the limitation in claim 1 of “an axial region of the shaft body extending from the second end and being tapered relative to a longitudinal axis of the shaft.” We agree with for the tapered axial region and that starting point would be the extremity of the shaft not an undefined point in the “end region.” Because Patent Owner proposes a construction of “end” that would have general application to all claim terms including the first end of the shaft, the second end of the shaft, and the sleeve end, and that construction has no bearing on the issues we address below, we do not reach Patent Owner’s proposed general construction of “end” by itself. We determine that no other claim terms require express construction for purposes of this Decision. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’”) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 17
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“As discussed above in our claim construction analysis, apart from the issue of the general construction of “end,” we determine that this limitation uppermost extremity of the shaft. Because neither Polinski nor Piepho disclose a tapered axial region starting at the uppermost extremity of the shaft, we find that Petitioner has not shown that the combination of Polinksi and Piepho discloses this limitation.” slip op. at 25
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundDecided for patent owner
“This paragraph discusses “accurate alignment” in connection with joint 21, not tapered end 25. Ex. 1018, 3:23–35. The paragraph subsequently states that both joint 21 and end 25 are tapered but that shaft end 25 may alternatively be cylindrical. Id. We also find nothing in this paragraph supporting Petitioner’s assertion that alignment “is notoriously more difficult with purely cylindrical shafting” (Pet. 16–17). In order to support its position, Petitioner improperly conflates separate statements in this paragraph of Piepho, i.e., joint 21 provides accurate alignment, joint 21 is tapered, and end 25 is tapered. Petitioner makes an unsupported logical leap that the result of these three statements is that tapered end 25 provides accurate alignment. However, Petitioner fails to reconcile this argument with the final sentence in this paragraph that shaft end 25 may also be cylindrical as shown in Figure 4. Figure 4 “is an external view of another embodiment of” Piepho’s shaft. Ex. 1018, 2:49–50. In Figure 4, joint 21 has the same tapered configuration as shown in Figure 3 but end 25 is not tapered. Based on our review of Piepho’s Figures 3 and 4, we find that Piepho’s reference to “accurate alignment” refers to joint 21 and not to tapered end 25 as Petitioner alleges. Because Mr. Smith’s testimony (Ex. 1002, 59) essentially parrots the Petition on this point and is inconsistent with our finding, his testimony is entitled to little, if any, weight. For the foregoing reasons, we find that Petitioner has not established that a person of ordinary skill in the art would have been motivated to would teach this claim limitation.8 Because Petitioner has not shown that the combination of Polinski and Piepho teaches limitation 1b or an adequate motivation to combine, Petitioner has not shown by a preponderance of the evidence that claim 1 is obvious over Polinski, Piepho, and Harless.” slip op. at 27
Patent outcomesUS 11,014,090 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,014,090 - Luxottica Of America Inc. v. E-Vision Smart Optics, Inc.Adverse judgmentPTAB · Mar 31, 2026 · IPR2025-00216 · APJ John D Hamann · IPR · Adverse judgment
The Board granted the Patent Owner’s request for adverse judgment after disclaimer of claims 1–20.
RulingsAdverse judgment- Adverse judgmentAdverse judgmentGranted
“Our Rules provide that “[a] party may request judgment against itself at any time during a proceeding,” and that “[a]ctions construed to be a request for adverse judgment include: . . . [c]ancellation or disclaimer of a claim such that the party has no remaining claim in the trial.” 37 C.F.R. § 42.73(b)(2). Such is the case here. Thus, we grant Patent Owner’s unopposed Request for Adverse Judgment.” slip op. at 2
NonePatents in suitUS 11,487,138 - PTAB · Mar 25, 2026 · IPR2024-01380 · APJ Arthur M Peslak · IPR · Final written decision
The Board cancelled original claims 1–10 and granted substitute claims 11–19 because Petitioner did not prove claim 11 obvious over Torrence and Piepho.
RulingsFinal written decision- 112 supportGranted
“relied upon reasonably conveys to those skilled in the art that the inventor had possession of the claimed subject matter as of the filing date.” Ariad Pharms., Inc. v. Eli Lilly and Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc) (citing Vas-Cath Inc. v. Mahurkar, 935 F.2d 1555, 1562–63 (Fed. Cir. 1991)). “[T]he hallmark of written description is disclosure.” Id. “[T]he test requires an objective inquiry into the four corners of the specification from the perspective of a person of ordinary skill in the art. Based on that inquiry, the specification must describe an invention understandable to that skilled artisan and show that the inventor actually invented the invention claimed.” Id. “In order to satisfy the written description requirement, the disclosure as originally filed does not have to provide in haec verba support for the claimed subject matter at issue.” Yingbin-Nature (Guangdong) Wood Ind. Co., Ltd. v/ Int’l Trade Com’n, 535 F.3d 1322, 1334 (Fed. Cir. 2008). “[T]he level of detail required to satisfy the written description requirement varies depending on the nature and scope of the claims and on the complexity and predictability of the relevant technology.” Ariad, 598 F.3d at 1351 (citing Capon v. Eshhar, 418 F.3d 1349, 1357–58 (Fed. Cir. 2005)). “This inquiry . . . is a question of fact.” Id. (citing Ralston Purina Co. v. Far-Mar-Co, Inc., 772 F.2d 1570, 1575 (Fed. Cir. 1985)). Further, inventions in the mechanical and electrical-based arts usually involve predictable factors and can be more predictable than other fields, such as chemistry and biology. See In re Fisher, 427 F.2d 833, 839 (CCPA 1970);” slip op. at 13
- Skill levelSkill level petitioner adoptedDecided for petitioner
“C. Level of Ordinary Skill in the Art The level of ordinary skill in the art is “a prism or lens” through which we view the prior art and the claimed invention. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). The person of ordinary skill in the art is a hypothetical person presumed to have known the relevant art at the time of the invention. In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995). In determining the level of ordinary skill in the art, we may consider certain factors, including: “(1) the educational level of the inventor; (2) type of problems encountered in the art; (3) prior art solutions to those problems; (4) rapidity with which innovations are made; (5) sophistication of the technology; and (6) educational level of active workers in the field.” Best Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007)).” slip op. at 15
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“D. Claim Construction We determine that no express construction of any claim term is necessary for purposes of this Decision. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’”) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 16
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundReasonable expectation not foundNot shown unpatentable
“[c]ombin[e] the tapered region of Piepho with the shaft of Torrence, the tapered region would extend from an uppermost extremity of the shaft.” RMTA Opp. 9. But, Petitioner concedes that neither reference discloses a tapered region extending from the uppermost extremity. Petitioner argues that Torrence’s shaft is straight (Amended RMTA Sur-reply 9) and that “[t]he tapered region of Piepho does not extend to the extreme end of the shaft.” RMTA Opp. 11 (emphasis added). Because neither Torrence nor Piepho discloses a shaft with a tapered region that “extends from an uppermost extremity of the shaft,” we find that the combination of Torrence and Piepho does not teach limitation 11[a]. We now analyze whether Petitioner provides reasoning with a rational underpinning why a person of ordinary skill in the art would have been motivated to modify Torrence with Piepho to extend Torrence’s taper from the upper extremity of its shaft. slip op. at 22
Claim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 9,827,568 - Nxtgen Toys, LLC v. Zipstring, LLCAll claims unpatentablePTAB · Feb 20, 2026 · IPR2024-01213 · APJ Richard H Marschall · IPR · Final written decision
Claims 1–4, 12, and 15–17 are unpatentable; substitute claim 27 is allowed, while substitute claims 21–26 and 28 are denied as obvious.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person having ordinary skill in the art at the time of the invention “was typically a person with a bachelor’s degree in mechanical engineering, aerospace engineering, physics, or other science or 6 Patent Owner does not rely on any objective indicia of nonobviousness in this proceeding. engineering based degree that [was] familiar with general principles of mechanics and aerodynamics with at least two years of experience in product design and development in the field of toys or other amusement type devices.” Pet. 32 (citing Ex. 1002 ¶¶ 2–6, 22–26). Patent Owner states that it submitted the following proposal for a POSITA in the related district court litigation: “[a POSITA] would have had at least a B.S. degree in Mechanical Engineering, Electrical Engineering, Aerospace Engineering, Industrial Design, Product Design, or similar field, with at least two years industry experience in one of these fields, and such POSITA would have been familiar with general principles of mechanics, fluid mechanics and aerodynamics.” PO Resp. 4–5. We note that the parties’ proposals overlap considerably, and neither party argues the inadequacy of the other party’s proposal or that any patentability issue in this case turns on the resolution of this issue. We find Petitioner’s definition consistent with the problems and solutions disclosed in the ’774 patent and prior art of record, and adopt it as our own. See, e.g., GPAC, 57 F.3d at 1579 (approving the determination of the level of ordinary skill in the art by appeal to the references of record). We would arrive at the same findings and conclusions in this Decision if we adopted Patent Owner’s proposal.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Id. at 1312–13. Only terms in controversy need be construed, and only to the extent necessary to resolve the controversy. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Petitioner contends that no “term requires construction to resolve the invalidity grounds presented in this Petition since the prior art renders claims 1–4, 12, and 15–17 unpatentable under any reasonable interpretation of the claims.” Pet. 7. Patent Owner argues that it “does not believe express claim constructions are necessary during this proceeding because the claims can readily be given their ordinary and customary meaning in the context of the patent at the time it was filed.” PO Resp. 5. Based on the parties’ positions and our view of the record, we need not expressly construe any claim limitations to resolve the issues in this Decision. To the extent that any implicit claim construction issues relate to the issues raised by the parties, we address them in the context of the parties’ patentability arguments below.” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentableUnpatentable
“string, and that adding Scorch’s slot removes this arguably inconvenient process by allowing insertion and removal of a string without removing and reinstalling any aspects of the housing. See Pet 85–86 (citing Ex. 1002 ¶¶ 174–175; Ex. 1007, 3:30–3:53, 6:03; Ex. 1008, 3:46–4:45); Pet. Reply 18–20 (citing in part Ex. 2002 ¶ 187 (Dr. Janét’s testimony that Wagner’s removal and reinstallation of a cover “may be viewed as an inconvenient process”)). Making insertion and removal of the string easier and quicker provides a notable advantage over Wagner’s existing device. See id. Scorch itself supports this argument and the related expert testimony because it discusses insertion and removal of strings and stated that the slot allows a user to “swap them out really quick.” Ex. 1007, 3:30–53. Petitioner also persuasively argues that a POSITA would know how to add the slot while maintaining the proper operation of the device, such as allowing insertion and removal of the string and avoiding inadvertent exiting of the string from the device. See Pet. 86–87 (citing Ex. 1002 ¶¶ 175–176; Ex. 1007, 4:00–30, Ex. 1008, 2:49–52); Pet. Reply 19, 21 (citing Ex. 1002 ¶¶ 174–176). We find Petitioner’s arguments and reasoning in support of adding Scorch’s slot to Wagner’s housing straightforward and persuasive. Patent Owner’s arguments against the combination do not directly refute Petitioner’s reasoning or cast doubt on Scorch’s statement that its slot enables “quick” insertion and removal of a string—quicker than Wagner’s method that requires removal and replacement of a cover on its housing. See PO Resp. 16–22; PO Sur-reply 14–20; Ex. 2002 ¶ 187 (acknowledging inconvenience of Wagner’s existing process for insertion and removal of a string). Patent Owner suggests that Petitioner’s proposed combination fails to take into consideration certain drawbacks such as the risk of inadvertent string exit from the housing or slot, but Petitioner expressly addresses such concerns in the Petition. See PO Resp. 18 (stating that Scorch’s slotted funnel may allow the string to “shoot out the slot” and that Scorch addresses this by adding “a bent wire” to “prevent the string from coming out the side”); PO Sur-reply 16–17; Pet. 86–87 (arguing that Wagner’s flanges would help to trap the string in place, but if not, Scorch’s additional structures could be used to restring the string and “to further reduce the risk of a string inadvertently exiting” the device). We agree with Petitioner that a POSITA would understand how to incorporate Scorch’s slot without causing inadvertent removal of the string—using structures already present in Wagner and Scorch—and the need to add such unclaimed structurers does not teach away from the combination as Patent Owner suggests. See Pet. 86–87; PO Resp. 22. We also agree with Petitioner that a POSITA would understand how to make minor modifications, if necessary, to allow insertion and removal of the string around Wagner’s flanges. See Pet. Reply 21 (citing Ex. 1002 ¶¶ 174–176).” slip op. at 26
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner
“refute Petitioner’s reasoning or cast doubt on Scorch’s statement that its slot enables “quick” insertion and removal of a string—quicker than Wagner’s method that requires removal and replacement of a cover on its housing. See PO Resp. 16–22; PO Sur-reply 14–20; Ex. 2002 ¶ 187 (acknowledging inconvenience of Wagner’s existing process for insertion and removal of a string). Patent Owner suggests that Petitioner’s proposed combination fails to take into consideration certain drawbacks such as the risk of inadvertent string exit from the housing or slot, but Petitioner expressly addresses such concerns in the Petition. See PO Resp. 18 (stating that Scorch’s slotted funnel may allow the string to “shoot out the slot” and that Scorch addresses this by adding “a bent wire” to “prevent the string from coming out the side”); PO Sur-reply 16–17; Pet. 86–87 (arguing that Wagner’s flanges would help to trap the string in place, but if not, Scorch’s additional structures could be used to restring the string and “to further reduce the risk of a string inadvertently exiting” the device). We agree with Petitioner that a POSITA would understand how to incorporate Scorch’s slot without causing inadvertent removal of the string—using structures already present in Wagner and Scorch—and the need to add such unclaimed structurers does not teach away from the combination as Patent Owner suggests. See Pet. 86–87; PO Resp. 22. We also agree with Petitioner that a POSITA would understand how to make minor modifications, if necessary, to allow insertion and removal of the string around Wagner’s flanges. See Pet. Reply 21 (citing Ex. 1002 ¶¶ 174–176). At best, Patent Owner’s arguments on this issue establish potential drawbacks in Petitioner’s proposed combination, but drawbacks alone do not defeat Petitioner’s obviousness rationale that includes readily apparent benefits. See Winner Int’l Royalty Corp. v. Wang, 202 F.3d 1340, 1349 n.8 (Fed. Cir. 2000) (“The fact that the motivating benefit comes at the expense of another benefit . . . should not nullify its use as a basis to modify the disclosure of one reference with the teachings of another.”); Medichem, S.A. v. Rolabo, S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006) (“a given course of action often has simultaneous advantages and disadvantages, and this does not necessarily obviate motivation to combine “). In addition, even if Patent Owner were correct that Wagner’s existing design works as well as Petitioner’s proposed combination, given all of the tradeoffs involved, that would not fatally undermine Petitioner’s showing. In re Fulton, 391 F.3d 1195, 1200 (Fed. Cir. 2004) (obviousness does not require that the proposed combination “is the preferred, or most desirable, combination”). On this record, Petitioner’s (and Scorch’s) stated advantages that are achieved when adding Scorch’s slot to Wagner’s housing adequately support Petitioner’s motivation to combine rationale.” slip op. at 26
Patent outcomesUS 11,674,774 unpatentableClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · NautilusPatents in suitUS 11,674,774 - Alpinestars S.P.A. / Alipinestars USA Inc. v. Dainese S.P.A.Rehearing deniedPTAB · Feb 9, 2026 · IPR2025-00750 · APJ Benjamin D M Wood · IPR · Rehearing
The Board denied rehearing, leaving institution denied because Petitioner did not show a reasonable likelihood of prevailing on claims 1–22 under the challenged obviousness grounds.
RulingsRehearing decision- RehearingRehearing, deniedDenied
“Petitioner misstates the Decision’s reasoning. As is clear from the previous discussion, we determined that Petitioner’s articulated reasons for combining EP’536 with CN’180 lacked a rational underpinning, not because “EP’536 does not relate to ‘air bags,’” but because the means by which EP’536’s device inflates differs fundamentally from that of CN’180’s device. Dec. 17–18. Petitioner did not acknowledge this critical difference in the Petition, and continues not to do so in its Rehearing Request.” slip op. at 5
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“EP’536 with CN’180 lacked a rational underpinning because EP’536’s inflation mechanism differs fundamentally from CN’180’s inflation mechanism. Dec. 17–18. As we stated, whereas CN’180’s fall-protection belt uses an airbag that requires an external source of pressurized air to inflate, EP’536’s garment does not need an external inflation device because “the gas generating agent 18 in each envelope automatically generates gas and inflates the envelopes in response to rising temperatures.” Id. at 18 (citing Ex. 1004 ¶ 15; Ex. 1005 ¶¶ 5, 19). This difference reflects the fundamentally different purposes of the two devices: CN’180’s device is designed to provide “fall protection” to, e.g., “elderly people,” (Ex. 1005 ¶ 1, 3), whereas EP’536’s device provides “adaptive thermal insulation” for, e.g., garments worn by fire fighters. Ex. 1004 ¶¶ 1–3, 250. Because of the different means by which EP’536’s and CN’180’s devices inflate and the different purposes for doing so, we were not persuaded that one of ordinary skill in the art would have combined the references as Petitioner proposed. Dec. 18. We further noted that the modification would not have improved the reusability of EP’536’s device “by having only one mechanism to recharge,” because EP’536’s “gas generating agent does not need any ‘mechanism to recharge.’” Dec. 18. Instead, we noted EP’536’s teaching that its gas generating agent “automatically recombines or condenses in response to a temperature decrease to return the envelopes, and therefore the garment, to its original thickness, at which point the gas generating agent is ready for subsequent reactivation.” Id. (citing Ex. 1004 ¶¶ 139–141). Finally, we determined that replacing EP’536’s envelopes with CN’180’s airbag “would have made EP’536’s invention unsuitable for its intended purpose: providing a protective garment with ‘adaptive thermal insulation.’” Dec. 19. We stated that “Petitioner does not suggest, and we have found nothing in the record to establish, that CN’180’s airbag would provide this feature.” Id. at 20.” slip op. at 3
- Obviousness (§103) › KSR rationalesMotivation not foundNot shown unpatentable
“rationales for combining EP’536 and CN’180. Reh’g Req. 6–7. First, Petitioner asserts that we “improperly rejected Petitioner’s ‘simple substitution’ evidence in view of [the Board’s] incorrect conclusion that EP’536 does not disclose an ‘external source of inflation [EP’536’s dosing aids].’” Id. at 6 (citing Dec. 18–19). This argument is unpersuasive at least because, as we discussed above, EP’536’s dosing aids do not constitute an external source of inflation. Petitioner further argues that we incorrectly evaluated its “obvious to try” rationale because, contrary to our analysis, Petitioner did in fact identify a problem to be solved by its “finite number of solutions”: “simplify[ing] the design and reduc[ing] the number of required inflation mechanisms.” Id. at 6–7. The Petition’s entire “obvious to try” discussion is as follows: [A] POSITA would have found it obvious to try a one-piece airbag 10 with strip-shaped inflation units 12 in the EP’536- CN’180 airbag system because it would have been a selection from a finite number of identified predictable solutions (i.e., using one chamber with connected individual inflation units 12 versus multiple individual envelopes 20). 5 Petitioner also argues that dosing aids are “needed in order to make the disclosed device reusable.” Reh’g Req. 5–6. This is incorrect, as EP’536 conveys that the reusability of the device is a result of the gas generating agent condensing or recombining when temperatures fall. Ex. 1004 ¶¶ 139– 141. Even if it were true, however, it is unclear how it would support Petitioner’s argument. Pet. 16. As is evident, Petitioner did not identify a design need, market pressure, or other problem that would have been addressed by its identified “solutions,” and therefore we were not persuaded by this rationale. Dec. 19. Petitioner’s attempt to cure this deficiency in its Rehearing Request is tardy. We cannot misapprehend or overlook an assertion that Petitioner fails to make in the Petition. It is also insufficient. Petitioner does not provide any evidence of a known design need or market pressure to “simplify [EP’536’s] design” or reduce the number of “required inflation mechanism” it uses.” slip op. at 7
§ 103 obviousnessPatents in suitUS 12,012,065 - Geneoscopy, Inc. v. Exact Sciences CorporationAll claims unpatentablePTAB · Feb 5, 2026 · IPR2024-01330 · APJ Ryan H Flax · IPR · Final written decision
Claims 3, 4, and 12–19 are unpatentable as obvious under each asserted ground.
RulingsFinal written decision- Skill levelOther
- Expert testimonyOther
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“embody claims of the ’746 patent, the product has features not covered by the ’746 patent’s claims, some of which are critical unclaimed elements according to Patent Owner. Accordingly, Cologuard is not coextensive with the challenged claims, and no nexus between the product and the challenged claims is shown on this record.” slip op. at 35
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable
“developed where the patient need not manipulate their fecal sample to portion it, but the law of obviousness does not require an option to be the best option to be obvious. For these reasons, bearing in mind that the ultimate burden here is always on Petitioner, we are not persuaded by Patent Owner’s argument. We also reject Patent Owner’s argument that only impermissible” slip op. at 60
Patent outcomesUS 11,970,746 unpatentable§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,970,746 - Allstate Insurance Company v. Atos, LLCSome claims unpatentablePTAB · Jan 30, 2026 · IPR2021-01449 · APJ Jon M Jurgovan · IPR · Remand
Claims 3–5 are unpatentable; claims 1 and 2 are not shown unpatentable. Claims 3 and 4 are obvious over the applied grounds under the remand construction of “movement vector.”
RulingsRemand decision- RemandOther
“was incorrect, vacated the Final Written Decision as to claims 3 and 4, and remanded the case to the Board to determine the ordinary and customary meaning of “movement vector” and decide the outcome for claims 3 and 4 in accordance with that meaning. Atos, LLC v. Allstate Insurance Company, 2025 WL 1482404, at *5 (Fed. Cir. May 23, 2025); Paper 35 (“Federal Circuit Remand,” “Remand,” or “Fed. Cir. Remand”). Pursuant to the Federal Circuit’s instructions, the Board authorized the” slip op. at 3
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“considered individually and together, have well-understood, common meanings to ordinarily skilled artisans as of the invention date, reflected by the ’174 patent’s specification and other evidence of record noted above. Accordingly, we determine that the ordinary and customary meaning of “movement vector” is “a vector indicating movement of an object.” 3) “operation indicator” Petitioner” slip op. at 20
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“Dr. Kanellakopoulos’s explanation that angular momentum is not inherent to an object, and its computation requires an arbitrary choice of a point of origin that has no physical meaning in the context of vehicle motion, also supports Patent Owner’s position. Id. ¶ 71 (citing Ex. 2004, 262). Accordingly, Patent Owner’s argument, that angular momentum cannot be used to detect a vehicle turning, is persuasive. Id. We also find persuasive, as Dr. Kanellakopoulos explains, that Petitioner’s argument regarding the figure on Kleppner 234 is based on misinterpretation of the vectors in that figure. Id. ¶ 67 (explaining that Kleppner 233–234 does not depict a gravity vector).” slip op. at 35
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“Kleppner does not disclose a rotation vector, a person of ordinary skill would have used the knowledge of a rotation vector (because it is a term of art) alongside Kleppner’s teaching, to arrive at claim 1. See Pet. Reply 11. This argument does not satisfy Petitioner’s burden to provide articulated reasoning with some rational underpinning to support the conclusion of obviousness. See KSR, 550 U.S. at 419 (citing In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006)). Petitioner does not explain which teaching of Kleppner a person of ordinary skill would have selected and combined with their knowledge of a rotation vector to yield the method of claim 1, or explain why a person of ordinary skill would have recognized based on Kleppner that estimating the angle between a rotation vector and gravity vector could be used to detect a vehicle turning. Nor does Petitioner respond to Patent Owner’s assertion that Kleppner provides no rationale for estimating an angle of alignment between a rotation vector and gravity vector as a way of detecting a vehicle turning. See Ex. 2001 ¶ 65.” slip op. at 35
Patent outcomesUS 9,846,174 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 9,846,174 - Dr. Falk Pharma GmbH v. Ellodi Pharmaceuticals, L.P.Adverse judgmentPTAB · Jan 26, 2026 · IPR2025-00055 · APJ Zhenyu Yang · IPR · Adverse judgment
The Board granted Patent Owner’s motion, entered adverse judgment against Patent Owner on claims 1–42 after statutory disclaimer, and terminated the proceeding.
RulingsAdverse judgment- Adverse judgmentAdverse judgmentGranted
“A party may request judgment against itself at any time during a proceeding. 37 C.F.R. § 42.73(b). Under the Rules, actions construed as a request for entry of adverse judgment include “[c]ancellation or disclaimer of a claim such that the party has no remaining claim in the trial.” 37 C.F.R. § 42.73(b)(2). Here, Patent Owner has disclaimed, under 37 C.F.R. § 1.321, claims 1–42 of the ’407 patent, which constitute all challenged claims involved in this trial. See Ex. 2031. We thus construe the statutory disclaimer as a request for entry of adverse judgment. Having reviewed the statutory disclaimer, we determine that adverse judgment against Patent Owner with respect to claims 1–42 of the ’407 patent is appropriate.” slip op. at 2
NonePatents in suitUS 9,486,407 - Dr. Falk Pharma GmbH v. Ellodi Pharmaceuticals, L.P.Adverse judgmentPTAB · Jan 23, 2026 · IPR2025-00054 · APJ John G New · IPR · Adverse judgment
The Board granted Patent Owner’s unopposed motion and entered adverse judgment against Patent Owner as to claims 1–16 after statutory disclaimer.
RulingsAdverse judgment- Adverse judgmentAdverse judgmentGranted
“A party may request judgment against itself at any time during a proceeding. Actions construed to be a request for adverse judgment include … [d]isclaimer of the involved application or patent.” 37 C.F.R. § 42.73(b)(1). We find that good cause exists to grant Patent Owner’s unopposed request for adverse judgment and to terminate this proceeding. Consequently, we grant Patent Owner’s Motion to Terminate and Request for Adverse Judgment. slip op. at 2
NonePatents in suitUS 11,246,828 - Dr. Falk Pharma GmbH v. Ellodi Pharmaceuticals, L.P.Adverse judgmentPTAB · Jan 23, 2026 · IPR2025-00052 · APJ John G New · IPR · Adverse judgment
The Board granted Patent Owner’s unopposed motion and entered adverse judgment against Patent Owner as to claims 1–17 following statutory disclaimer of all claims.
RulingsAdverse judgment- Adverse judgmentAdverse judgmentGranted
“A party may request judgment against itself at any time during a proceeding. Actions construed to be a request for adverse judgment include … [d]isclaimer of the involved application or patent.” 37 C.F.R. § 42.73(b)(1). We find that good cause exists to grant Patent Owner’s unopposed request for adverse judgment and to terminate this proceeding. Consequently, we grant Patent Owner’s Motion to Terminate and Request for Adverse Judgment. slip op. at 2
NonePatents in suitUS 10,632,069
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.