- Canadian Solar Inc. v. Maxeon Solar Pte. Ltd.Some claims unpatentablePTAB · Jan 12, 2026 · IPR2024-01039 · APJ Kristina M Kalan · IPR · Final written decision
Claims 9–11 are unpatentable as obvious; claim 12 was not shown unpatentable because Froitzheim does not disclose silver contacts formed over silicon dioxide.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“In the Institution Decision, we adopted the assessment offered by Petitioner. Inst. Dec. 7–8. Because Petitioner’s definition of the level of skill in the art is consistent with the ’516 patent and the asserted prior art, we maintain it for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“C. Claim Construction We construe each claim “in accordance with the ordinary and customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their plain and ordinary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). Based on our review of the complete trial record and the arguments raised by the parties, we determine that it is not necessary to expressly construe any claim terms to resolve the parties’ dispute. Realtime Data, 912 F.3d at 1375.” slip op. at 8
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“We are convinced Petitioner has shown that a person of ordinary skill in the art would have had a reason to combine the subject matter of Froitzheim and Gan for the reasons expressed by Petitioner (Pet. 42–48) and discussed above (see supra). Patent Owner’s arguments in response are not persuasive. Though Gan’s teachings are directed to silicon concentrator solar cells, the ordinarily skilled artisan would have understood Gan also refers to silicon solar cells in general. Compare Ex. 1007, 249 (stating “[t]he data in Fig. 6 are quite useful for silicon solar cells” and “cell efficiency is obtained for a backside contact solar cell”), with id. (explaining that “polysilicon emitters with these qualities can be quite useful for silicon concentrator solar cells”). Dr. Banerjee testifies that “the Skilled Artisan would interpret Gan as recommending the feature for solar cells in general” and “that its polysilicon emitter with interfacial oxide feature is beneficial for solar cell efficiency in general.” Ex. 1003 ¶ 146; Ex. 2023, 93:10–15. Furthermore, Dr. Ruby testified that when designing solar cells, he reviews published works in the field and would not necessarily limit his review to the type of solar cell being developed. Ex. 1066, 48:4–51:16. Q So you would agree that if you're developing a 1-Sun solar cell, it might be worthwhile to look at publications regarding concentrator solar cells? * * * THE WITNESS: Well, it would be advisable or suggest -- you know, it would certainly be worth -- worth looking at, although not all of the methods for creating solar cells -- concentrator cells are required for producing 1-Sun cells. So some things would be of use and many things would not. Ex. 1066, 51:7–16. That Dr. Banerjee and Dr. Ruby each testify that a person of ordinary skill in the art would have had reason to consult the teachings of both concentrator and non-concentrator solar cells—in fact describing such consideration as “advisable,” “suggest[ed],” and “worth looking at”—when designing a solar cell is dispositive of this issue. We acknowledge Dr. Ruby’s testimony that consideration of broader teachings may hinge on a specific application for the solar cells. Ex. 1066, 51:7–16. But the combination proposed here by Petitioner, which substitutes one known emitter for another, that is, a polysilicon emitter for a diffused emitter, to improve efficiency of solar cell performance, has been shown to have general applicability regardless of solar cell type. Ex. 1003 ¶¶ 142–148 (citing Ex. 1006, Abstr., ¶¶ 1, 9; Ex. 1007, 245, 248, 249; Ex. 1014; Ex. 1039); Ex. 1067 ¶¶ 21–28; Ex. 2023, 32:2–11. Accordingly, we are persuaded that Petitioner has shown that the” slip op. at 25
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner
“The standard for demonstrating teaching away is, as Petitioner notes, high. “A reference may be said to teach away when a person of ordinary skill, upon reading the reference, would be discouraged from following the path set out in the reference, or would be led in a direction divergent from the path that was taken by the [inventor].” In re Gurley, 27 F.3d 551, 553 (Fed. Cir. 1994). Under that standard, Patent Owner’s “teaching away” argument is unavailing. The permitted temperatures in Froitzheim include a range of 900°C-1200°C, which expresses a permitted range, rather than a discouragement or divergence from that range, and the Froitzheim range clearly encompasses the temperatures used by Gan. A reference will also “teach away” if it suggests that the developments flowing from its disclosures are “unlikely to produce the objective of the applicant’s invention,” which is not the case here. See, e.g., Syntex (U.S.A.) LLC v. Apotex, Inc., 407 F.3d 1371, 1380 (Fed. Cir. 2005). The record demonstrates that Gan’s teachings are consistent with Froitzheim’s and, in the proposed combination, likely to produce the desired objective. Pet. Reply 13. In sum, the evidence of record here does not support a conclusion that Froitzheim criticizes or discredits the use of the lower temperatures in its expressly stated range, or that an ordinarily skilled artisan would have been discouraged from considering the full range of Froitzheim’s identified temperatures. Nor does it support a conclusion that Gan’s temperature, which is within Froitzheim’s range of temperatures, amounts to a criticizing, discrediting, or discouraging that would constitute a teaching away.” slip op. at 28
Patent outcomesUS 8,222,516 mixedClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,222,516 - Canadian Solar Inc. v. Maxeon Solar Pte. Ltd.All claims unpatentablePTAB · Jan 12, 2026 · IPR2024-01040 · APJ Avelyn M Ross · IPR · Final written decision
Claims 9–20 are unpatentable as obvious over the Froitzheim/Gan and Froitzheim/Kwark combinations, with Hartiti or Sivoththaman for the specified dependent claims.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art would have been someone with an advanced degree involving the discipline of electrical engineering, applied physics, chemistry, or materials science, and at least two years of experience designing, developing, or researching in the field. Alternatively, that person would have had a bachelor’s degree in electrical engineering, applied physics, or materials science, and at least three years of experience designing, developing, or researching in the field.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Petitioner contends that “the term ‘in situ’ in dependent claim 15 is appropriate for construction because it is defined in the 053 Patent.” Pet. 20. In particular, Petitioner argues that “in situ” refers to processing that occurs after a single manual loading of the substrate into a furnace or other single chamber or multi-chamber processing tool. EX1003, ¶157. Therefore, in the context of claim 15’s diffusion steps, the single, simultaneous drive-in/diffusion of the front and back dopants would constitute “in situ” steps that satisfy the claim. Pet. 56–57 (citing Ex. 1003 ¶ 157); see Ex. 1001, 5:9–18. Patent Owner argues that “in the parallel district court litigation, [Petitioner] advocates for an additional limitation on what constitutes the claimed ‘in situ.’” PO Resp. 35–36. In particular, Patent Owner asserts that Petitioner urges that “in situ” processing “covers only ‘in situ’ diffusion and not ‘in situ’ doping.” PO Resp. 36. But, Patent Owner states that it applies the construction adopted by Petitioner here. PO Resp. 36 Because the outcome of this Decision does not rest on any particular” slip op. at 9
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“Petitioner explains that “Froitzheim and Gan are analogous art because each is in the same field of endeavor—solar cell design” and “[e]ach is reasonably pertinent to the problems of efficiencies and cost-effectiveness of solar cell designs.” Pet. 29 (citing Ex. 1003 ¶94; Ex. 1006, Abstr., ¶¶ 1, 9; Ex. 1007, 245, 249). Petitioner asserts that a person of ordinary skill in the art “would have been motivated to replace Froitzheim’s diffused emitter with a deposited polysilicon emitter along with an oxide layer because Gan taught and suggested that this modification would be an improvement.” Pet. 29 (Ex. 1003 ¶ 95). Gan teaches that “the cell performance can be improved if the diffused-emitter [e.g., of Froitzheim] is replaced with the polysilicon emitter” and that “the J0 [i.e., measure of surface recombination] of the p-type polysilicon emitter (Fig 5) [beneficially] appears to be much lower than what has been previously reported,” which Gan attributes to the thermal oxide interfacial layer. Pet. 29–30 (quoting Ex. 1007, 245, 248); see also Ex. 1007, 249 (“polysilicon emitters with these qualities can be quite useful for silicon concentrator solar cells”). Petitioner also argues that the skilled artisan would have had a reasonable expectation of success because the combination is simply” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“reflected in the Gan Thesis, does not defeat obviousness because “obviousness cannot be avoided simply by a showing of some degree of unpredictability in the art so long as there was a reasonable probability of success.” Pfizer, Inc. v. Apotex, Inc., 480 F.3d 1348, 1364 (Fed. Cir. 2007); see also In re Longi, 759 F.2d 887, 896 (Fed. Cir. 1985) (“Only a reasonable expectation of success, not absolute predictability, is necessary for a conclusion of obviousness.”). In addition, “[w]hen prior art contains apparently conflicting references, the Board must weigh each reference for its power to suggest solutions to an artisan of ordinary skill” and, in so doing, “consider the degree to which one reference might accurately discredit another.” In re Young, 927 F.2d 588, 591 (Fed. Cir. 1991). The Gan Thesis describes known techniques that the skilled artisan could have employed to improve thin oxide growth. The Gan Thesis states that “it appears that the variation of the oxide thickness results mainly from the oxide-growth step. If this is the case, it is possible that the thin-oxide growth can be improved by performing the oxidation at a lower temperature such that the oxidation rate can be controlled more precisely.” Ex. 2003, 112. Though Patent Owner characterizes this disclosure as “an unproven assumption” or “speculation at best” (Tr. 32:23–26), Drs. Banerjee and Ruby disagree. For example, Dr. Banerjee explains that [l]owering the temperature slows down the chemical reaction between silicon and oxygen in the formation of silicon oxide and thus allows for greater control on the thickness of the oxide layer. As Gan Thesis shows, the oxide thickness increases with time, and slowing that process down by lowering the temperature allows a Skilled Artisan to optimize the oxygen flow time in order to achieve the desired thickness. Ex. 1082 ¶ 19 (citing Ex. 2003, 111). Dr. Banerjee further testifies that “since at least the 1990s,” the ordinarily skilled artisan was equipped with methods to reliably grown oxide layers with controlled thicknesses. Ex. 1082 ¶ 12. “These methods were able to finely tune conditions such as reaction time, temperature, pressure, and oxygen concentration of the oxidation reaction as it occurs to obtain reliable formation of thin oxide layers.” Ex. 1082 ¶ 12; see id. ¶ 19; Ex. 1048; Ex. 1078. Dr. Ruby, Patent Owner’s declarant, offers similar testimony explaining that prior to 2008, the purported date of invention, it was known that lowering the temperature at which the oxide is formed will slow the growth rate of that oxide. Ex. 1081, 103:3–18. Accordingly, the evidence of record suggests that the skilled artisan, at the time of invention, would have had a reasonable expectation of success in the combination of Froitzheim and Gan.” slip op. at 23
Patent outcomesUS 8,878,053 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,878,053 - Canadian Solar Inc. v. Maxeon Solar Pte. Ltd.No claims unpatentablePTAB · Jan 12, 2026 · IPR2024-01038 · APJ Jo-Anne M Kokoski · IPR · Final written decision
Claims 10–16 and 19 were not shown unpatentable because Petitioner did not establish a motivation to combine the cited references to meet the claimed dopant concentration.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Artisan”) would have had “an advanced degree involving the discipline of electrical engineering, applied physics, chemistry, or materials science, and at least two years of experience designing, developing, or researching in the field,” or “a bachelor’s degree in electrical engineering, applied physics, or materials science, and at least three years of experience designing, developing, or researching in the field.” Pet. 5–6 (citing Ex. 1003 ¶ 47); 1194IPR Pet. 11 (citing Ex. 1100 ¶ 47). Patent Owner states that it “accepts the level of ordinary skill in the art that is proposed in the Petition.” PO Resp. 11. In the Institution Decisions, we adopted the assessment offered by Petitioner. 1038IPR Dec. 5–6; 1194IPR Dec. 8. Because Petitioner’s definition of the level of skill in the art is consistent with the ’315 patent and the asserted prior art, we maintain it for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir 2001).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“B. Claim Construction We construe each claim “in accordance with the ordinary and customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their plain and ordinary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Only those terms in controversy need to be construed, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). Based on our review of the complete trial record, we determine that it is not necessary to expressly construe any claim terms to resolve the parties’ dispute. Realtime Data, 912 F.3d at 1375.” slip op. at 8
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“Petitioner fails to sufficiently demonstrate that the combination of Li and King, Swanson-352, or Marvin teaches “a portion of the silicon substrate has a dopant concentration of approximately less than or equal to 2x1018 cm-3” as recited in claim 10 because Petitioner fails to establish by a preponderance of the evidence that a Skilled Artisan would have been motivated to look to the dopant concentrations in King, Swanson-352, or Marvin to determine the concentration of dopants for use in Li’s silicon substrate.” slip op. at 17
- Strike new argumentNew argument disregardedDecided for patent owner
“Our rules provide that a petitioner must include “[a] full statement of the reasons for the relief requested, including a detailed explanation of the significance of the evidence including material facts, and the governing laws, rules, and precedent.” 37 C.F.R. § 42.22(a). Our rules also state that “[a] reply may only respond to arguments raised in the corresponding . . . patent owner response.” Id. § 42.23(b). “‘Respond,’ in the context of 37 C.F.R. § 42.23(b), does not mean proceed in a new direction with a new approach as compared to the positions taken in a prior filing.” PTAB Consolidated Trial Practice Guide, 74 (Dec. 2025) (“CTPG”). Our Trial argument in reply that it could have presented earlier, e.g., to make out a prima facie case of unpatentability.” Id. at 73; see also id. at 74 (“Examples of indications that a new issue has been raised in a reply include new evidence necessary to make out a prima facie case for the patentability or unpatentability of an original or proposed substitute claim, such as newly raised rationale to combine the prior art references that was not expressed in the petition.”). In the Petition, Petitioner argues that a Skilled Artisan would have been motivated to combine Li’s back contact cell with the front portion doping concentration disclosed in King, Swanson-352, or Marvin, because Li, King, Swanson-352, and Marvin are analogous art. Pet. 30–32. Petitioner also points to Li’s acknowledgement that techniques for increasing efficiency are generally desired because efficiency is an important characteristic of a solar cell. Id. at 32. As Patent Owner notes, however, the Petition does not include the phrase “finite number” or “obvious to try.” PO Sur-reply 20. Petitioner’s “obvious to try” argument is a newly raised rationale to combine the prior art references necessary to make out a prima facie case of unpatentability. See CTPG 74. Accordingly, we do not consider Petitioner’s untimely new argument.” slip op. at 21
Patent outcomesUS 11,251,315 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 11,251,315 - Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.No claims unpatentablePTAB · Dec 10, 2025 · IPR2024-01186 · APJ Brian D Range · IPR · Final written decision
Claims 1–20 were not shown unpatentable because Kwatra does not teach or suggest minimizing rotational velocity and acceleration as required by the claims.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art (POSITA) would have the following characteristics: “a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing or digital cameras.” Pet. 6 (citing Ex. 1002 ¶¶ 36–37). Petitioner states that, “[a]lternatively, a POSITA would have four years of experience working on image or video processing 6 Patent Owner asserts objective evidence of nonobviousness. Prelim. Resp. 19–27. or digital cameras.” Id. Petitioner further contends “[a]n advanced graduate degree in the disciplines cited above may make up for the work experience indicated above.” Id. Patent Owner does not dispute the level of ordinary skill in the art. Prelim Resp. 14–15. For purposes of this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the ’894 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“Petitioner “does not believe any terms require a formal construction.” Pet. 6. Patent Owner agrees “no claim terms presently require construction to resolve any current dispute between the parties.” PO Resp. 15. We do not discern a need to construe explicitly any claim language at this juncture because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 11
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“Kwatra teaches, at Equation 7, minimizing velocity and acceleration of a function representing camera path (P). FF ¶¶ 6, 8–9. Kwatra does not state that this camera path function considers rotation. Rather, the words “camera path” suggest x, y, z movement of the camera rather than rotation of the camera. Dr. Foroosh’s testimony that Kwatra’s minimization of a smoothed camera path does not result in minimizing rotational velocity and acceleration is credible because this testimony is consistent with Kwatra as a whole and consistent with the other evidence of record. Id. ¶ 10. Kwatra recognizes that image rotation angle (“θ”) may not remain smooth. Id. ¶ 12. But rather than attempting to minimize velocity and acceleration of rotation of the camera housing, Kwatra states that applying a smoothness constraint on rotation angle “may be non-linear.” Id. ¶ 13. Consistent with Kwatra, Dr. Foroosh credibly explains the difficulty of applying linear techniques to rotation. Id. Thus, Kwatra proposes instead constraining the sine and cosine of theta. Id. ¶ 14. The Kwatra provisional application is part of the Kwatra reference (id. ¶ 15), and it similarly opts for simpler schemes rather than estimating all parameters for all frames jointly. Id. ¶ 16. The provisional explains that the rotational component is relatively small such that non-linear computations minimizing velocity and rotation can be avoided. Id. ¶¶ 17–18. The testimony of Patent Owner’s witness, Dr. Foroosh, explaining the provisional is credible (Ex. 2018 ¶ 72) because it is consistent with Kwatra’s complete disclosure. Dr. Foroosh’s testimony is more credible than the testimony of Petitioner’s witness, Dr. Katsaggelos, because Dr. Katsaggelos did not review the Kwatra provisional application and, thus, did not review the entire disclosure of Kwatra. Id. ¶ 19; see also In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc) (obviousness analysis considers whether “the claimed inventions are rendered obvious by the teachings of the prior art as a whole” (emphasis added)).” slip op. at 28
- Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner
“(id. ¶ 15), and it similarly opts for simpler schemes rather than estimating all parameters for all frames jointly. Id. ¶ 16. The provisional explains that the rotational component is relatively small such that non-linear computations minimizing velocity and rotation can be avoided. Id. ¶¶ 17–18. The testimony of Patent Owner’s witness, Dr. Foroosh, explaining the provisional is credible (Ex. 2018 ¶ 72) because it is consistent with Kwatra’s complete disclosure. Dr. Foroosh’s testimony is more credible than the testimony of Petitioner’s witness, Dr. Katsaggelos, because Dr. Katsaggelos did not review the Kwatra provisional application and, thus, did not review the entire disclosure of Kwatra. Id. ¶ 19; see also In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc) (obviousness analysis considers whether “the claimed inventions are rendered obvious by the teachings of the prior art as a whole” (emphasis added)).” slip op. at 28
Patent outcomesUS 10,574,894 not shown unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,574,894 - Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.Some claims unpatentablePTAB · Dec 2, 2025 · IPR2024-01052 · APJ Brian D Range · IPR · Final written decision
Claims 1, 2, 7–12, and 17–20 are unpatentable as obvious; claims 3–6 and 13–16 were not shown unpatentable because the asserted Watanabe combinations were unsupported.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“cameras.” Pet. 6 (citing Ex. 1002 ¶¶ 36–38). Petitioner further contends “[a]n advanced graduate degree in the disciplines cited above may make up for the work experience indicated above.” Id. Patent Owner does not dispute and applies Petitioner’s proposed level of skill. PO Resp. 6. We find that Petitioner’s proposal is reasonable and consistent with the ’832 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art). Thus, we apply Petitioner’s proposal in our analysis.” slip op. at 13
- Prior constructionPrior construction adoptedDecided for petitioner
“In our Institution Decision, we construed “determin[ing] a viewing window for the visual content as a function of progress through the progress length” as “requiring determining a viewing window for different times of the video.” Inst. Dec. 21. Neither party disputes this construction. PO Resp. 7; Pet. Reply 1–7. We maintain this same construction.” slip op. at 13
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“Thomason are in the same field of endeavor. Thomason describes a camera and method for correctly orientating pictures from the camera. See, e.g., Ex. 1004 ¶¶ 1, 2 29–40, Figs. 3a–3b. In particular, Thomason is interested in rotating and cropping images to reduce the effect of poor orientation. Pet. 9 (citing Ex. 1004 ¶¶ 2, 34, 36). Pacurariu likewise describes aligning and resizing/cropping of a captured image to correct poor orientation. See, e.g., Ex. 1005 ¶¶ 1, 3, 45–56, Figs. 5A–5C. The preponderance of the evidence also supports that a person having ordinary skill in the art would have had reason to combine the Pacurariu’s teachings with Thomason to predictably improve Thomason. Thomason teaches correct rotation of video data and makes use of rotation sensor to correct rotated images. Pet. 19–21 (citing, e.g., Ex. 1004 ¶¶ 4, 27, 29, 35; Ex. 1002 ¶¶ 76–77). Pacurariu similarly uses sensors and measures tilt angle of the camera. Id at 21–22 (citing, e.g., Ex. 1005 ¶¶ 51–52, Fig. 6; Ex. 1002 ¶ 78). Pacurariu further teaches that its tilt data angle can be stored for each “video frame.” Id. at 22 (citing Ex. 1005 ¶ 52). Petitioner, with support from credible testimony of Dr. Katsaggelos, explains how the teachings of Thomason and Pacurariu could be successfully combined. Id. at 23 (citing, for example, Ex. 1002 ¶ 81). A person of ordinary skill in the art could have known that Thomason’s system could be improved by saving rotation data for each video frame and correcting images on a frame-by-frame basis. Id. at 23–24. The testimony of Dr. Katsaggelos is credible in this regard. Ex. 1002 ¶¶ 80–81. Petitioner and Dr. Katsaggelos explain the references’ teachings and, based on these teachings, assert that a person having skill in the art would have had reason to combine with reasonable expectation of success based on those teachings. Reason to combine may properly come from the references themselves. KSR Int’l Co., 550 U.S. at 418 (explaining reason to combine may come from “interrelated teachings of multiple patents”). Based on the evidence presented, Petitioner establishes by a preponderance of the evidence that a person having ordinary skill in the art would have had reason to combine the teachings of Thomason and Pacurariu with a reasonable expectation of success. Ex. 1002 ¶¶ 76–81, 89–92; Ex. 1004 ¶¶ 4, 8–9, 27, 29, 35; Ex. 1005 ¶¶ 26, 41, 46, 51–52, 55–57, Figs. 6, 7.” slip op. at 27
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for patent owner
“evaluating nexus between the claimed invention and objective evidence of nonobviousness, also referred to as secondary considerations. Lectrosonics, Inc. v. Zaxcom, Inc., IPR2018-01129, Paper 33 at 33 (PTAB Jan. 24, 2020) (precedential). We first consider whether Patent Owner has demonstrated “that its products are coextensive (or nearly coextensive) with the challenged claims,” resulting in a rebuttable presumption of nexus. Id. at 33. If not, that “does not end the inquiry into secondary considerations”; “the patent owner is still afforded an opportunity to prove nexus by showing that the evidence of secondary considerations is the ‘direct result of the unique characteristics of the claimed invention.’” Id. (quoting Fox Factory, 944 F.3d at 1373–75).” slip op. at 62
Patent outcomesUS 11,336,832 mixedClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,336,832 - Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.Some claims unpatentablePTAB · Nov 26, 2025 · IPR2024-00984 · APJ Nabeel U Khan · IPR · Final written decision
Claims 6 and 7 are unpatentable as obvious over Meulen and Chao; claim 1 was not shown unpatentable because Meulen does not disclose transforming an image captured by its camera.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner argues that a person of ordinary skill in the art in the relevant field “would have a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing, or digital cameras,” or alternatively “would have four years of experience working on image or video processing, or digital cameras.” Pet. 6. Petitioner further argues that an “advanced graduate degree” may “make up for the work experience.” Id. (citing Ex. 1002 ¶¶ 33–34). “Patent Owner applies Petitioner’s proposed level of skill.” PO Resp. 4–5 (citing Ex. 2027 ¶¶ 19–20). We adopt Petitioner’s proposed level of ordinary skill because it is consistent with the level of skill in the art at the time of the invention as reflected by the ’413 patent and the cited prior art.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“From the outset we note that the words of the claim recite “non- uniformly shift[ing] the pixels” and do not recite a “non-linear” transformation. This favors Petitioner’s position, which is based directly off the definition of “non-uniform,” over Patent Owner’s position, which substitutes “non-linear” for “non-uniform.” Generally, then, we would determine the ordinary and customary meaning of the claim term in the context of the entire Specification. Here, however, the ʼ413 patent does not mention “uniform” or “non-uniform” shifting of pixels anywhere except in the claims. The Specification, therefore, provides limited guidance, by itself, as to the ordinary and customary meaning of the term. Nonetheless, even reviewing the portions of the Specification cited by the parties, we see no clear or unambiguous effort to limit the challenged claims to require only non-linear transformations in which the pixels to which a transformation is applied do not have the same amount of shift. is not non-linear. Pet. Reply 1. Specifically, Petitioner argues that the center circle of Figure 2B maintains the original circular shape after the transformation is applied to the image which contradicts Patent Owner’s argument that no two pixels will have the same amount of shift. Pet. Reply 1–2. We agree. In Figure 2B of the ʼ413 patent, the center of the image is chosen to be the region of interest. Ex. 1001, 4:19–21. After the input image goes through linear scaling (step 204) and then non-linear warping (step 206) the circles become more vertically compressed as they approach the top and bottom edges and more horizontally stretched as they approach the left and right edges. Id. at 4:22–30. But “the center circle is fully corrected so that it maintains the original circular shape of the corresponding circle in the input image 212.” Id. at 4:23–25. This means that at least some pixels, such as those of the center circle, undergo the same amount of shift after being transformed.” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“readable instructions” of claims 1 and 2 must occur in a particular order. Specifically, Patent Owner argues that the step of “determine a portion within the input image” must occur after “obtain[ing] an image” and before “apply[ing] a transformation to the input image.” PO Resp. 17 (citing Ex. 2027 ¶ 59). Petitioner argues, on the other hand, that the specification does not require such an order and, in fact, describes an embodiment where such an order is not followed. Pet. 3. We determine that the “determine a portion within the input image” step does not need to occur after the “obtain an image” step and before the “apply a transformation to the input image” step. As Patent Owner itself points out, claims 1 and 2 are apparatus and system claims respectively, and an ordering of the limitations of such claims is not necessary. PO Resp. 17. Even if we were to treat the apparatus and system claims as reciting the steps of a method, “as a general rule the claim is not limited to performance of the steps in the order recited, unless the claim explicitly or implicitly requires a specific order.” Baldwin Graphic Systems, Inc. v. Siebert, Inc., 512 F.3d 1338, 1345 (Fed. Cir. 2008) (citing Interactive Gift Express, Inc. v. Compuserve Inc., 256 F.3d 1323, 1342–43 (Fed. Cir. 2001)). We see nothing in the claims that would cause us to break this general rule. Patent Owner argues that the claims imply a “specific order because the ‘determine a portion’ requirement operates on ‘the [obtained] input image’ and defines the ‘portion’ that is necessary for the 23; Ex. 2027 ¶ 59). Although the steps are recited in a specific order in the claim, as they necessarily must be, the claim does not expressly specify that the certain steps must occur before or after other instructions, nor does logic imply such a requirement. For example, if certain characteristics of the image are known before the image is obtained (e.g. the size, dimensions, resolution, aspect ratio, or content etc.) the determination of the portion of the image could be made before the image is obtained. These characteristics may be based on the specific device taking the image or the subject matter of the image, both of which may be known before the image is captured or obtained. It is, therefore, not necessary that the image be obtained in order for a portion of the image to be determined. Similarly, we do not find the written description to expressly or implicitly specify an order the claimed step of “determine a portion of the input image.” For example, the written description of the ʼ413 patent states that in Figure 2B “the center of the image is chosen to be the region of interest that is most fully corrected and the distortion increases in each direction as the frame boundary is approached.” Ex. 1001, 4:19–22. Patent Owner emphasizes that this disclosure implies that an input image is obtained before the center portion is chosen. PO Resp. 19 (citing Ex. 1001, 3:63–64, 4:19–22). But the description of this embodiment does not expressly recite an order. For example, the description of Figure 2A explains that “an input image is obtained” in step 202, “the image is then scaled” in step 204, and a “non-linear warping is then applied” in step 206. Ex. 1001, 3:63–4:3. This description does not mention “determin[ing] of a portion of the image” as a separate step or as part of the listed steps, and therefore, does not specify an order in which this step must occur. is configured so that some areas of the image are fully corrected geometrically, while some other areas are distorted. . . . [T]he center of the image is chosen to be the region of interest that is most fully corrected and the distortion increases in each direction.” Id. at 4:17–19. This excerpt from the ʼ413 patent, which the Patent Owner specifically relies on (PO Resp. 19), also does not specify an order in which the determination step (choosing of the region of interest) takes place. Moreover, because the ʼ413 patent states that the warp module is configured so that some areas are fully corrected while others are not, the determination step could take place at the time the warp module was configured, presumably before the image was obtained. Finally, the ʼ413 patent states that “in the case, of video, the area may dynamically change between images (e.g. to follow a moving object).” Ex. 1001, 4:34–36. Patent Owner argues that this description “requires first obtaining the image in order to locate the object that is being followed.” PO Resp. 19–20. This embodiment is related to the case of video or a moving object, which the challenged claims do not mention. We, therefore, decline to limit the scope of the claim based on this embodiment. Phillips v. AWH Corp., 415 F.3d 1303, 1323 (Fed. Cir. 2005) (en banc) (“[A]lthough the specification often describes very specific embodiments of the invention, we have repeatedly warned against confining the claims to those embodiments.”).” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“Having reviewed the parties’ arguments and cited evidence we determine Petitioner has established, by a preponderance of the evidence, that a POSITA would have been motivated to combine Meulen and Chao. For example, Petitioner argues that “[i]t would have been obvious that when performing image scaling, pixels from the input to output positions are shifted based on a scaling factor.” Pet. 91. Meulen teaches scaling but does not provide the details regarding scaling. E.g., Ex. 1007, 1:55–56, 4:37–49. We agree that in light of Meulen’s disclosure of scaling, a POSITA would have looked to other references, such as Chao, for further details on how to perform scaling. Dr. Katsaggelos provides credible support, testifying that “Meulen mentions ‘compression and/or scaling,’ and provides details on how to perform compression. But Meulen does not disclose the details of how to perform scaling. A POSITA when faced with Meulen and having the knowledge about scaling would have been motivated to turn to a prior art reference that discloses the details of scaling.” Ex. 1002 ¶ 262. Patent Owner argues that Petitioner provides no motivation to combine other than asserting that it involves combining prior art elements. PO Resp. 35 (quoting Pet. 92). As explained above, however, Petitioner does more than just assert that the motivation involves combining prior art elements. Instead, Petitioner explains that Meulen discusses both compression and scaling, and provides details regarding compression but does not provide details on how to scale. Pet. 91–92; Ex. 1002 ¶¶ 262–262. Thus, Meulen teaches that scaling was a known technique. See Hybritech, (“a patent need not teach, and preferably omits, what is well known in the art”). Dr. Katsaggelos testifies that, in this situation, a POSITA would have looked to Chao for details regarding scaling. Ex. 1002 ¶¶ 262–263. We determine this establishes, by a preponderance of the evidence, that a POSITA would have had reason to combine Meulen’s teachings with Chao. Patent Owner draws a distinction between Meulen and Chao, arguing that “Meulen is concerned with modifying content from a media source to be displayed on a device’s screen while Chao, by contrast, is directed to changing the aspect ratio of a document intended for printing.” Id. at 36 (citing Ex. 2027 ¶¶ 89–90). Patent Owner’s argument is contradicted, however, by Chao’s disclosure which states that “after all the background and foreground elements in the image have been resized . . . [t]he image may be output by displaying the image on or as part of: a display screen such as a computer monitor, camera screen, printer screen, printed page, projected image, or the like.” Ex. 1008 ¶ 32. Patent Owner argues that Meulen’s system avoids distortion near the middle where the user’s focus is more likely to be, while Chao, on the other hand, is directed to avoiding distortion of stylized borders on differently sized pages. PO Resp. 36–37 (citing Ex. 1006, 1:26–29; Ex. 1008 ¶¶ 1, 25; Ex. 2027 ¶¶ 91–92). This argument reads the prior art too narrowly and does not address Petitioner’s combination. Petitioner does not rely on Chao for its teaching of avoiding distortion near the borders of the image, but rather on its teaching of scaling the image while maintaining the design intent of the original image. Ex. 1008 ¶ 22; Ex. 1014 ¶ 67. Thus, Petitioner is applying Chao’s techniques of scaling (regardless of where the area of 92. Finally, Patent Owner argues that Chao’s approach of stretching/shrinking only the background and uniformly scaling entire foreground objects is suitable for graphic design but incompatible with Meulen which is concerned with adapting externally derived media source content for display on a fixed size screen. PO Resp. 37–38 (citing Ex. 2027 ¶ 93). We disagree with Patent Owner’s argument because it does not address Petitioner’s combination. Petitioner relies on Chao’s teaching of stretching/shrinking of background elements and applies that stretching/shrinking to Meulen’s images displayed on its screen. Pet. 91–92 (citing Ex. 1008 ¶¶ 28, 63; Ex. 1002 ¶ 263). The fact that Chao applies its teaching to graphic design does not prevent a POSITA from applying those teachings to Meulen’s media content displayed on its screen.” slip op. at 20
Patent outcomesUS 10,015,413 mixedClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,015,413 - Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, IncNo claims unpatentablePTAB · Nov 25, 2025 · IPR2024-01165 · APJ William V Saindon · IPR · Final written decision
Claims 1–21 were not shown unpatentable because Zhou does not teach the claimed low-light high-pass or stickiness parameter limitations.
RulingsFinal written decision- BurdenFwd all claims patentableNot shown unpatentable
“4. Conclusion for the Prior Art Analysis In sum, we find that Zhou does not disclose the low-light high-pass parameter or the stickiness parameter. Petitioner’s grounds for both independent claims 1 and 16 rely on Zhou for teaching a low-light high-pass parameter or a stickiness parameter. Pet. 23–28, 64. Because we find Zhou does not teach these limitations, all of Petitioner’s grounds fall for this reason. III. CONCLUSION For the reasons given above, we determine that Petitioner has not established by a preponderance of the evidence that any claim of the ’840 patent would have been obvious in view of the prior art cited.” slip op. at 18
- Skill levelSkill level petitioner adoptedOther
“A person of ordinary skill in the art (POSITA) in the field of the ’840 patent would have a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing, or digital cameras. Alternatively, a POSITA would have four years of experience working on image or video processing, or digital cameras. An advanced graduate degree in the disciplines cited above may make up for the work experience indicated above. Pet. 6 (citing Ex. 1002 ¶ 32). Patent Owner applies the same standard. PO Resp. 26–27. We use this agreed-upon standard for purposes of this Decision.” slip op. at 7
- Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner
“We review this testimony based on the strength of the underlying factual basis. 37 C.F.R. § 42.65(a); Ashland Oil, Inc. v. Delta Resins & Refractories, Inc., 776 F.2d 281, 294 (Fed. Cir. 1985) (“Lack of factual support for expert opinion going to factual determinations, however, may render the testimony of little probative value . . ..”). Here, the underlying factual basis is not very strong for either witness. That said, we find that Dr. Foroosh’s testimony is more logically sound and consistent with the ’840 patent disclosure. Based on our reading of the specification, we find a clear indication that “stickiness” has to do with the past. In order to control “the extent by which preceding portion(s) . . . impacts determination of the smoothed trajectory” (emphasis added), one must control the degree by which the past frames impact determination. And to control the degree of the past’s influence, one must, as a consequence, favor the past over the future. That is, the frame of reference of the stickiness parameter is the past. The specification could have used a time-agnostic term, like a “nearness” or “adjacency” parameter, but it did not. Thus, the fact that “stickiness” is used in conjunction with “preceding” indicates that it deals with a preference for preceding frames. On this basis, we find Dr. Katsaggelos’s testimony less persuasive than Dr. Foroosh’s.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“That said, we do not construe a stickiness parameter as prohibiting consideration of future frames. Instead, we determine that the stickiness parameter’s value determines the impact of the preceding portions, versus the following portions. The ’840 patent recognizes this, when it says that a stickiness parameter value of “1,” representing a “lazy” stabilizer that maximally favors the past, would not override a violation of the margin constraint based on the look-ahead (i.e., would not allow the viewing window to fall out of bounds in the event of large future motion). See Ex. 1001, 22:26–30; see also id. at 12:61–13:29 (acknowledging that favoring the past may lead to a conflict with the viewing window determination), 15:39–60 (adjusting the viewing window to ensure it does not violate a margin constraint). Thus, while a past-favoring parameter by necessity favors the past over the future, it does not prohibit consideration of the future. In view of the above, we construe the claimed “stickiness parameter” as a parameter that controls the extent by which preceding portions of the trajectory impacts determination of the smoothed trajectory, with an understanding that in order to favor preceding portions, to some extent, the parameter must relatively disfavor following portions.” slip op. at 10
Patent outcomesUS 10,958,840 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,958,840 - Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, IncNo claims unpatentablePTAB · Nov 25, 2025 · IPR2024-01164 · APJ William V Saindon · IPR · Final written decision
Claims 1–21 were not shown unpatentable because Shi does not disclose the claimed low-light high-pass parameter required by the asserted obviousness grounds.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“Given the teachings of the specification, we agree with Patent Owner that a low-light high-pass parameter is a parameter of a smoothing function that favors high frequencies (high pass) when exposure times are long (low light). See Tr. 42:10–18 (Patent Owner’s counsel stating that “high-pass” means “there’s a bias or preference for high frequencies”); Ex. 2020, 93:23– 94:15 (Petitioner’s declarant, Dr. Katsaggelos, agreeing that a high-pass system attenuates the low frequency of a signal). Although we acknowledge Petitioner’s position that the specification provides other ways or considerations in implementing a smoothing function, based on our above analysis of the specification, we find that the specification describes the lowlight high-pass parameter as a specific component of a smoothing function. See, e.g., Ex. 1001, 21:17–25 (setting out several parameters besides the low-light high-pass parameter used in trajectory smoothing).” slip op. at 10
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“position and a real device position. Id. at 18:27–40. In other words, the blur is addressed by analyzing the image to identify motion and then shifting the image. Shi, however, does not disclose how its parameter is based on low light (or the long exposure times indicative of low light). In its Petition, Petitioner asserts that a person of ordinary skill in the art would understand that “blurs can be caused by low light conditions.” Pet. 28 (citing Ex. 1003 ¶ 111). Although this is true, that does not mean that Shi’s blurs are identified by a parameter that considers low light. As we just described, Shi identifies the blur by quantifying the amount of motion of the points in an image, not by identifying low light. This is simply a different way to determine the presence of motion blur. In Shi, blur is measured, whereas in the ’840 patent, it is inferred based on low-light conditions (e.g., by observing the exposure time). See, e.g., Ex. 1007, 18:7– 26; Ex. 1001, 19:12–26. In its Reply, Petitioner does not point to any further disclosures. Accordingly, we find that Shi does not disclose the “low-light” aspect of the claimed low-light high-pass parameter. This is sufficient to determine that Petitioner’s ground does not meet all claim limitations. Similarly, we find that Shi does not disclose the “high-pass” aspect of the parameter. Shi’s blur compensation uses a spherical interpolation to modify the image. Ex. 1007, 18:27–40. The low-light high-pass parameter, as we have construed the term, allows more high frequencies. To allow more high frequencies, this necessarily means either allowing fewer low frequencies, or allowing more high frequences as opposed to some counterfactual situation in which fewer high frequencies were going to be allowed. See Ex. 2020, 94:23–95:15; Ex. 2022. We are directed to no persuasive evidence from Petitioner that Shi’s spherical interpolation favors high frequencies over low frequencies. Accord Ex. 2018 ¶ 107 (Patent Owner’s expert stating that Shi’s spherical interpolation “reintroduce[es] both high- and low-frequency motion”). Even if Shi allows the viewing window to track the camera position “consistent with the natural blur in the image” (Ex. 1007, 17:63–67), we are not provided with sufficient evidence to conclude by a preponderance of the evidence that providing a similar visual goal as a high-pass parameter (Ex. 1001, 22:16–18, “the output motion may include high frequencies that mask motion blur”) is the same as having a high-pass parameter. Again, merely preserving high frequencies is not the same as having a “high-pass parameter” because, as construed, a “high-pass parameter” also involves some degree of attenuation of low frequencies or relative increase of high frequencies. Accordingly, we find that Shi does not disclose the “high-pass” aspect of the claimed low-light high-pass parameter.” slip op. at 18
Patent outcomesUS 10,958,840 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,958,840 - PTAB · Nov 6, 2025 · IPR2025-00820 · APJ Neil T Powell · IPR · Institution
The Board instituted IPR on claims 1–11 on all petition grounds, finding a reasonable likelihood that claim 1 would have been obvious over Tadros, Porter, Kalili, and Texin 990R.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. See 35 U.S.C. § 314; 37 C.F.R. § 42.4(a). To institute an inter partes review, we must determine that the information presented in the Petition and the Preliminary Response shows “a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons set forth below, we determine that there is a reasonable likelihood that Petitioner will prevail with respect to at least one challenged claim. We institute an inter partes review of claims 1–11 based on the grounds set forth in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Pet. 17–18 (citing Ex. 1007 ¶¶ 13–15). Patent Owner does not dispute Petitioner’s explanation of the level of skill in the art. See generally Prelim. Resp. At this stage of the proceeding and on the present record, we adopt Petitioner’s uncontested proposed level of ordinary skill in the art, which we find consistent with the level of ordinary skill in the art reflected by the ’090 patent and the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Additionally, only terms that are in controversy need to be construed, and these need be construed only to the extent necessary to resolve the controversy. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Both parties indicate that no claim terms need to be expressly construed. Pet. 29–30; Prelim. Resp. 5. Consistent with that, we determine that we need not construe any claim terms expressly in order to resolve the parties’ dispute regarding whether Petitioner has demonstrated a reasonable likelihood of prevailing.” slip op. at 8
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“Weighing the parties’ arguments and evidence, we find Petitioner’s arguments and evidence sufficient at this stage to demonstrate a reasonable likelihood of prevailing. Pet. 8–17, 30–49. For example, regarding whether of Porter’s disclosure to the problem faced by inventor of the ’090 patent. Pet. 8; Ex. 1007 ¶¶ 98–108, 125–127, 144–164. The ’090 patent illustrates that its inventor faced the problem of selecting desirable materials for an aligner, including selecting a desirable material for an aligner’s hard layer. Ex. 1001, 5:44–59. Petitioner and Dr. Osswald provide significant evidence and reasoning tending to show that Porter’s discussion of Tritan logically would have commended itself to the attention of an inventor facing the problem of selecting an aligner hard layer. Pet. 8 (citing Ex. 1007 ¶¶ 98–108, 125–127, 144–164). For example, Dr. Osswald explains that “because Tritan copolyesters are BPA-free, Rafih specifically discloses Tritan EX401 as an exemplary material” for its oral appliance. Id. ¶ 99 (citing Ex. 1104, 5:4–64, claims 2, 9, 10). In view of this, Dr. Osswald testifies that “Rafih would inform a [person of ordinary skill in the art] that Porter’s guidance regarding replacing polycarbonate with Tritan applies to dental appliances.” Ex. 1007 ¶ 146. At this stage, weighing Petitioner’s evidence against Patent Owner’s contrary attorney argument that Porter focuses on dishware, we determine Petitioner has shown sufficiently that Porter is analogous art. Pet. 8; Ex. 1007 ¶¶ 98–108, 125–127, 144–164; Prelim. Resp. 1, 9–10, 18–21.” slip op. at 11
Claim construction§ 103 obviousnesscites PhillipsPatents in suitUS 11,648,090 - PTAB · Nov 6, 2025 · IPR2025-00821 · APJ Neil T Powell · IPR · Institution
The Board instituted review of claims 1–23, 25, and 26 on all asserted grounds, finding a reasonable likelihood that claim 1 would have been obvious over Tadros, Porter, Kalili, and Texin 990R.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“We have authority to determine whether to institute an inter partes review. See 35 U.S.C. § 314; 37 C.F.R. § 42.4(a). To institute an inter partes review, we must determine that the information presented in the Petition and the Preliminary Response shows “a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons set forth below, we determine that there is a reasonable likelihood that Petitioner will prevail with respect to at least one challenged claim. We institute an inter partes review of claims 1–23, 25, and 26 based on the grounds set forth in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Pet. 17 (citing Ex. 1007 ¶¶ 13–15). Patent Owner does not dispute Petitioner’s explanation of the level of skill in the art. See generally Prelim. Resp. At this stage of the proceeding and on the present record, we adopt Petitioner’s uncontested proposed level of ordinary skill in the art, which we find consistent with the level of ordinary skill in the art reflected by the ’090 patent and the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Additionally, only terms that are in controversy need to be construed, and these need be construed only to the extent necessary to resolve the controversy. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Neither party indicates that we need to construe expressly any claim terms. Pet. 27–28; Prelim. Resp. 5. Consistent with that, we determine that we need not construe any claim terms expressly in order to resolve the parties’ dispute regarding whether Petitioner has demonstrated a reasonable likelihood of prevailing.” slip op. at 8
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“arguments and evidence sufficient at this stage to demonstrate a reasonable likelihood of prevailing. Pet. 8–17, 53–71. For example, regarding whether Porter is analogous art, Petitioner sufficiently shows reasonable pertinence of Porter’s disclosure to the problem faced by inventor of the ’091 patent. Pet. 8; Ex. 1007 ¶¶ 98–108, 125–127, 146–165. The ’091 patent illustrates that its inventor faced the problem of selecting desirable materials for an aligner, including selecting a desirable material for an aligner’s hard layer. Ex. 1001, 5:44–59. Petitioner and Dr. Osswald provide significant evidence and reasoning tending to show that Porter’s discussion of Tritan logically would have commended itself to the attention of an inventor facing the problem of selecting an aligner hard layer. Pet. 8 (citing Ex. 1007 “because Tritan copolyesters are BPA-free, Rafih specifically discloses Tritan EX401 as an exemplary material” for its oral appliance. Id. ¶ 99 (citing Ex. 1104, 5:4–64, claims 2, 9, 10). In view of this, Dr. Osswald testifies that “Rafih would inform a [person of ordinary skill in the art] that Porter’s guidance regarding replacing polycarbonate with Tritan applies to dental appliances.” Ex. 1007 ¶ 147. At this stage, weighing Petitioner’s evidence against Patent Owner’s countervailing attorney argument that Porter focuses on dishware, we determine Petitioner has shown sufficiently that Porter is analogous art. Pet. 8; Ex. 1007 ¶¶ 98–108, 125–127, 146–165; Prelim. Resp. 1–2, 9–10, 34–36.” slip op. at 13
Claim construction§ 103 obviousnesscites PhillipsPatents in suitUS 11,648,091
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.