- Kohler Co. v. Delta Faucet Co.All claims unpatentablePTAB · Feb 18, 2026 · IPR2024-00700 · APJ Jane E Inglese · IPR · Remand
On remand, the Board held claims 1–24 unpatentable as obvious over the asserted prior-art grounds, including Tseng’s disclosure of side-emitted light under the Director’s construction.
RulingsRemand decision- RemandOther
“We have jurisdiction under 35 U.S.C. § 6. This Final Written Decision on Remand from Director Review is entered pursuant to 35 U.S.C. § 318(a). Having reviewed the complete trial record pursuant to the Director Review Order, we determine that Petitioner has shown, by a preponderance of the evidence, that the challenged claims are unpatentable.” slip op. at 3
- Skill levelSkill level petitioner adoptedDecided for petitioner
“For purposes of this Decision, we adopt Petitioner’s definition of a POSITA. Petitioner’s witness (Mr. Cook) qualifies as a POSITA under this definition, and, therefore, is qualified to opine from the perspective of a POSITA on technical matters included within the areas of expertise prescribed by the definition. As indicated above, Petitioner’s definition of a POSITA does not require education in the field of optics and professional experience designing or analyzing optical apparatus, unlike Patent Owner’s definition. We are aware, however, that Patent Owner’s witness (Dr. Klopp) has more extensive experience with optical systems and methods than Petitioner’s witness (Mr. Cook). Compare Ex 1003 ¶¶ 8–14, Ex. 2005, 39:21–59:17, with Ex. 2003 ¶¶ 3–20, Ex. 2004, 1–2, Ex. 1015, 10:22–13:25. Although Mr. Cook possesses excellent credentials in the field of mechanical engineering, his experience in the design and analysis of optical systems and methods is sparse and insubstantial compared to that of Dr. Klopp. Id. Due to this difference in experience levels, in instances where the witnesses express differing views on factual issues related to optical systems and methods, we accord more weight to Dr. Klopp’s testimony than to Mr. Cook’s.” slip op. at 9
- Expert testimonyPatent owner expert creditedDecided for patent owner
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“The Director’s Order instructs us to adopt its interpretation of the recitation in claim 10 of “an outer illumination surface extending perpendicular to the longitudinal axis of the housing” (“the disputed limitation”) as being “satisfied by any amount of light emitted from the side surface.” Order 3. We, accordingly, construe the disputed limitation of claim 10 as a surface extending perpendicular to the longitudinal axis of the housing through which any amount of light is emitted from the side surface.” slip op. at 10
Patent outcomesUS 10,393,363 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,393,363 - Shenzhen Root Technology Co., Ltd. v. Willow Blossom Holdco LimitedAll claims unpatentablePTAB · Feb 18, 2026 · IPR2024-01296 · APJ Barry L Grossman · IPR · Final written decision
Claims 1–46 are unpatentable as obvious under § 103 over the asserted combinations of Chang, Fang, Yuen, Khalil, Park, and Chen.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner asserts that before the effective filing date of the claimed invention a person of ordinary skill in the art (“POSITA”) “would have had at least a bachelor’s degree in mechanical engineering or a similar field and at least two years of experience designing human breast pump equipment” and that “[m]ore education could substitute for experience and vice versa.” Pet. 2 (citing Ex. 1003 ¶¶ 15–18). Mr. Bauer’s cited testimony supports Petitioner’s assertion.” slip op. at 16
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“[parent application to the application that matured into the ’380 patent], the Examiner construed the term ‘self-contained, in-bra wearable device’ to mean ‘complete, or having all that is needed, in itself’ and is capable of being worn in a bra.” Pet. 3 (citing Ex. 1005, 2290) (emphasis omitted). According to Petitioner, “PO did not dispute this construction, and Petitioner applies it herein.” Id. Petitioner also states that “[o]ther terms of the Challenged Claims should receive their plain and ordinary meaning, and no formal claim constructions are necessary in this proceeding because ‘claim terms need only be construed to the extent necessary to resolve the controversy.’” Id. (citing Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011); Ex. 1003 ¶¶ 69–70). Again, because Patent Owner did not file a Response, we exercise our discretion and look to Patent Owner’s Preliminary Response. We note that in the Preliminary Response Patent Owner states that “[f]or purposes of this Preliminary Response, no claim terms require construction to resolve the prior art grounds raised in the Petition.” Prelim. Resp. 19. According to specific construction, any such terms should be accorded their plain and ordinary meaning in light of the specification.” Id. Construction is needed only for those terms “that are in controversy, and only to the extent necessary to resolve the controversy.” See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). There are no claim terms in controversy. Accordingly, we need not construe any terms for our analysis.” slip op. at 17
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“Petitioner contends (Pet. 17) that a person of ordinary skill in the art “would have been motivated to implement Chang’s breast pump device as suggested by Fang” to achieve four benefits: (1) “to facilitate convenient cleaning and maintenance” (Pet. 19 (citing Ex, 1003 ¶ 102)); (2) “to facilitate more rapid assembly and disassembly (e.g., during use)” (id. at 20–21 (citing Ex. 1003 ¶ 105)); (3) “as a particularly effective and suitable option to generate negative” slip op. at 34
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“a breast pump device having “a diaphragm pump that generates negative air pressure.” Pet. 33; see also id. at 38. Petitioner explains Chang’s pump “generates suction by cyclical compression and decompression of a conduit or flex-tube, and expressly notes that other configurations were known and suitable.” Id. at 17 (citing Ex. 1007 ¶¶ 22, 25, 28, 68, 79, 84–86). Chang, however, does not mention, specifically, that Chang’s pump is a “diaphragm” pump. We note, however, that this claim clause does not state or require any specific type of pump. It merely requires a “pump.” Clause 1[e]/29[e], discussed below, however, does require a “diaphragm” pump. Petitioner here merely lays the foundation for this later clause by asserting that “Fang provides a straightforward suggestion of a diaphragm pump including a diaphragm housing component formed in a wall of the pump housing.” Id. at 18 (citing Ex. 1009 ¶¶ 24–25, Fig. 7; Ex. 1003 ¶ 97). Thus, Petitioner asserts, Fang teaches “an ‘air pump’ in pneumatic connection with the diaphragm that serves to generate negative air pressure,” and Chang teaches “the location of pump components (e.g., ‘motor’ [46]).” Pet. 33 (citing Ex. 1007 ¶¶ 72, 80, Fig, 6A; Ex. 1009 ¶¶ 19, 24). Petitioner then asserts that “the ‘air pump’ components of the combined device are positioned within the pump housing,” and the air pump is powered by Chang’s rechargeable battery. Id. (citing Ex. 1007 ¶¶ 72, 80).” slip op. at 34
Patent outcomesUS 11,413,380 unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,413,380 - Boe Technology Group Co., Ltd. v. Optronic Sciences LLCAll claims unpatentablePTAB · Feb 17, 2026 · IPR2024-01132 · APJ Kevin W Cherry · IPR · Final written decision
Claims 1–7 are unpatentable: claims 1–3 and 5 are anticipated by Anzai, claim 4 is obvious over Anzai and Yamazaki, and claims 1–7 are obvious over Yamazaki and Anzai.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner describes a person of ordinary skill in the art (“POSITA” or “ordinarily skilled artisan”) at the time of the invention as having “a Bachelors’ degree in electrical engineering or a comparable field of study, plus approximately two to three years of professional experience with electronic and optoelectronic device design” and notes that “[a]dditional graduate education could substitute for professional experience, and significant experience in the field could substitute for formal education.” Pet. 5–6 (citing Ex. 1002, Neikirk Decl., ¶ 23). Patent Owner’s expert, Dr. Bretschneider testifies that In my opinion, the field of “electronic and optoelectronic device design” is too broad. A POSITA of the ’121, had at least a Bachelors’ degree in a field of engineering or physics and at least two to three years of professional experience related to the design and manufacture of the relevant aspects of flat panel displays. Additional relevant graduate education related [sic] could reduce but not eliminate the time requirement for professional experience. While Dr. Neikirk proposes a different definition of a POSITA, the differences do not have material effect on my opinions rendered below. Regardless of which definition of a POSITA were used, my conclusions would remain the same Ex. 2005, Bretschneider Decl., ¶ 39. We agree with and will apply Petitioner’s statement of the level of ordinary skill in the art. This level of ordinary skill is reflective of the education and experience that would have been required to understand the problems and solutions identified in the ’121 patent and the prior art. Okajima v. Bourdeau, 261 F.3d 1350 (Fed. Cir. 2001). We note that our conclusions would be the same even if we applied Patent Owner’s slightly narrower definition of a POSITA.” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“We find these definitions to be of some help in construing this term. We find that the common thread is that a “passivation layer” is an insulating layer that provides protection from the environment to the layers below it. See Ex. 1012, 140; Ex. 1013, 542, Ex. 1014, 798; Ex. 2010, 3; Ex. 2013, 1. We find this construction to be most consistent with the broad claim language and the disclosure in the Specification. Although “tying up dangling bonds,” may be a mechanism by which some materials provide such protection, nothing in the Specification or the extrinsic evidence provided appears to require that. Also, while chemical protection may be one kind of protection none of the evidence suggests that is the only protection that is provided. Moreover, nothing in the Specification supports reading a chemical protection requirement into the construction. Thus, we decline to adopt that portion of Patent Owner’s construction. Instead, we construe passivation layer as “an insulating layer that provides protection from the environment to the layers below it.” We need not construe the term any further to resolve the parties’ dispute over this claim language. See Realtime, 912 F.3d at 1375.” slip op. at 19
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“constructions for “passivation layer” and “capping layer.” We find that Petitioner has presented sufficient evidence to show that Anzai discloses both a “passivation layer” and a “capping layer.” As we explained above, we have construed “passivation layer” to mean “an insulating layer that provides protection from the environment to the layers below it.” Petitioner has shown that “first planarization film 17” is an insulating layer. See Ex. 1002 ¶¶ 62–65. We further find that Petitioner has shown sufficiently that “first planarization film 17” is “formed over the entire surface for flattening, which will protect the semiconductor surface from the surrounding environment.” Id. ¶ 63. We have rejected Patent Owner’s contentions that the film must tie up “dangling bonds,” and instead determined that protecting the surface from the environment is sufficient. Thus, we find that Petitioner has shown by a preponderance of the evidence that Anzai discloses the “passivation layer” of claim 3. As we explained above, we have construed “capping layer” to be “an insulation layer covering (i.e., capping) an underlying layer or structure.” Here, Petitioner has shown that Anzai’s planarization film 19 meets the claimed “capping layer.” See Pet. 20. We find that Petitioner has shown that it is more likely than not that “planarization film 19” is made of insulating material. As Dr. Neikirk persuasively testifies, Anzai discloses that planarization layer 17 may be made of an organic resin for flattening the surface. EX1003, 4:20-24. While Anzai does not disclose the material for planarization layer 19, it must be made of an insulation material because in the embodiment of Fig. 3A, it is the sole layer between electrode layer 71 and cathode layer 65 forming the second capacitor. Id., 6:3–8; Fig. 3A. Moreover, Anzai discloses that the first planarization film 17 and the second planarization film 19 for the first embodiment “function as the capacitance insulating film for this configuration.” Id., 5:62–67. Ex. 1002, Neikirk Decl., ¶ 62. We find this testimony well-reasoned and entitled to substantial weight. We further agree with Dr. Neikirk that a “POSITA would further understand that the second planarization film 19 is then further disposed on the first planarization film 17 (capping the passivation layer).” Id. ¶ 63 (citing Ex. 1003, 5:3–13; Figs. 2A–B, 3A–B). Thus, we find that Petitioner has shown by a preponderance of the evidence that Anzai discloses the claimed “capping layer.” Accordingly, we find that Petitioner has shown by a preponderance of” slip op. at 32
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“motivation to combine Anzai and Yamazaki. See Pet. 25–27; Ex. 1002, Neikirk Decl., ¶¶ 78–79. First, Patent Owner argues that essentially silicon nitride is an inferior material to use for Anzai’s planarization layer 17 compared with organic resin. PO Resp. 13–15. However, “[i]t’s not necessary to show that a combination is the best option, only that it be a suitable option.” Intel Corp. v. Qualcomm Inc., 21 F.4th 797, 800 (Fed. Cir. 2021) (emphasis in original). Patent Owner does not argue that silicon nitride would not work, but rather that it would be more difficult and more expensive to use. See PO Resp. 14. But “the fact that the two disclosed apparatus[es] would not be combined by businessmen for economic reasons is not the same as saying that it could not be done because skilled persons in the art felt that there was some technological incompatibility that prevented their combination. Only the latter is telling on the issue of nonobviousness.” Grit Energy Solutions LLC v. Oren Techs., LLC, 957 F.3d 1309, 1323 (Fed. Cir. 2020) (quoting Orthopedic Equip. Co., Inc. v. United States, 702 F.2d 1005, 1013 (Fed. Cir. 1983)). “Likewise, a given course of action often has simultaneous advantages and disadvantages, and this does not necessarily obviate motivation to combine.” Medichem, S.A. v. Rolabo, S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006). Here, Petitioner explains that “a POSITA would have known that organic materials usually have lower dielectric constants than inorganic materials, such as SiN, and a higher dielectric constant is desirable for the insulator in a capacitor since that leads to higher capacitance per unit area.” Pet. 26 (citing Ex. 1002, Neikirk Decl., ¶ 78). Petitioner further explains that this “then allows a reduced area storage capacitance element, one of the objectives of Anzai.” Id. (citing Ex. 1003, code (57)). Patent Owner’s focus mainly on planarization (PO Sur-reply 16–17) ignores that the Anzai’s planarization layers 17 and 19 also “function as the capacitance insulating film.” Ex. 1003, 5:65–67. Thus, although there are tradeoffs, Petitioner has shown sufficiently that a POSITA would have been motivated to incorporate the teachings of Yamazaki regarding potential materials for planarization layers 17 and 19. Second, Patent Owner argues that a Petitioner has failed to provide an adequate reason to select silicon nitride from Yamazaki’s list of potential materials. We disagree. Petitioner has explained the benefits of selecting a high dielectric inorganic material. Pet. 26. Yamazaki provides only three potential options—silicon oxide, silicon nitride, and silicon oxynitride. See Ex. 1004, 11:45–50. Moreover, Dr. Neikirk testified, supported by multiple references, that using silicon nitride was well known in the prior art at the time of the invention. See Ex. 1002, Neikirk Decl., ¶ 75 (citing Ex. 1007; Ex. 1008; Ex. 1009). “When there is a design need or market pressure to solve a problem and there are a finite number of identified, predictable solutions, a person of ordinary skill has good reason to pursue the known options within his or her technical grasp.” KSR, 550 U.S. at 421. Indeed, “[i]f a person of ordinary skill can implement a predictable variation, § 103 likely bars its patentability.” Id. at 417. This is the case here. Petitioner has shown that a person of ordinary skill seeking to improve the capacitance of Anzai’s planarization layers 17 and 19, without increasing the size of the capacitor, would have looked at the inorganic materials identified in Yamazaki as suitable for the purpose, and it would have been would obvious to choose silicon nitride, a well-known, and predictable material for the application. Thus, we disagree with Patent Owner that Petitioner has failed to show a sufficient reason for selecting silicon nitride from Yamazaki’s list of suitable materials. Third, Patent Owner argues that Petitioner’s contentions only support” slip op. at 37
Patent outcomesUS 7,586,121 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,586,121 - Samsung Display Co., Ltd. v. Pictiva Displays International Ltd.All claims unpatentablePTAB · Feb 9, 2026 · IPR2024-01095 · APJ Garth D Baer · IPR · Final written decision
Claims 2, 4, 9–12, and 17 are unpatentable under § 103 because the prior-art combinations teach the claimed features and have adequate motivation and reasonable expectation of success.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner contends a person of ordinary skill in the art “would have had a Bachelor’s degree in chemistry, physics, or a comparable field of study, and at least three years of research or industrial experience with organic optoelectronic light-emitting devices.” Pet. 10. Further, “[a]n individual with additional education could have less research or industrial experience and vice versa.” Id. Patent Owner does not dispute Petitioner’s formulation. See generally PO Resp. We adopt Petitioner’s uncontested proposed definition because it is consistent with the disclosures of the asserted prior art. See, e.g., Ex. 1006, code (57); Ex. 1011, code (57).” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“electron-hopping dopant. See In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004) (“The prior art’s mere disclosure of more than one alternative does not constitute a teaching away from . . . alternatives because such disclosure does not criticize, discredit, or otherwise discourage the solution claimed.”). As Petitioner explains, “Liq acts as an n-dopant in Ma,” which “increases ETL conductivity.” Pet. Reply 10. Patent Owner does not contest that Liq acts as an n-dopant in Ma. See Pet. Reply 30. Thus, Petitioner’s proposed combinations “substitute one known n-dopant for another to further the same goal of improving ETL conductivity.” Pet. Reply 10. Next, Patent Owner faults Petitioner for failing to show that using Ma’s Liq dopant in Diekmann’s/Suzuki’s ETL would result in lower diffusion or higher efficiencies as compared to Diekmann’s/Suzuki’s preferred n-dopants, which included cesium, barium, or lithium fluoride. PO Resp. 31–35; see PO Sur-reply 4–5. We disagree with Patent Owner’s argument because Petitioner does not need to show that Ma’s Liq n-dopant “was an improvement in a categorical sense” over Diekmann’s/Suzuki’s n-dopants, so long as Ma’s n-dopant was known and one skilled in the art would understand that implementing it had advantages. See Intel Corp. v. Pact XPP Schweiz AG, 61 F.4th 1373, 1381 (Fed. Cir. 2023) (quotation marks omitted); In re Fulton, 391 F.3d 1195, 1200 (Fed. Cir. 2004) (“[O]ur case law does not require that a particular combination must be the preferred, or the most desirable, combination described in the prior art.”). Petitioner does not assert skilled artisans would have used Liq because it was a superior to Diekmann’s/Suzuki’s preferred dopants, but because doping ETLs with Liq had known benefits including lower driving voltage and enhanced power efficiency from enhanced carrier injection increased transport conductivity, as compared to an undoped device. Pet. 37 (citing Ex. 1010, 813). That other potentially suitable or even superior n-dopants were also known does not make Liq nonobvious. Given Liq’s benefits outlined above, Petitioner has articulated sufficient reasoning with rational underpinning to support the legal conclusion that its proffered combination of Ma’s known dopant in Diekmann’s/Suzuki’s device would have been obvious to one skilled in the art. See KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 418 (2007).” slip op. at 12
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“1. Whether Ma Qualifies as a Prior Art Printed Publication First, Patent Owner argues that Petitioner has not demonstrated that Ma was publicly accessible in August 2008 so as to qualify as prior art. PO 11 As Petitioner notes, the district court adopted a claim construction requiring only “one or more wavelengths” in the infrared-to-UV spectrum. PO Resp. 26 (citing Ex. 2031, 47–48). Resp. 16–24. We addressed this same issue in our Final Written Decision in IPR2024-01094. IPR2024-01094, Paper 42 at 9–13. As we explained there, Ma qualifies as prior art printed publication because the record evidence supports what Ma says on its face—that it was published online on August 29, 2008 by an Elsevier, an established publisher, in Synthetic Metals, which is a reputable journal. Id. For the same reason explained in IPR2024-01094, we agree with Petitioner that Ma qualifies as a prior art printed publication.” slip op. at 10
Patent outcomesUS 11,828,425 unpatentable§ 102 anticipation§ 103 obviousnessPatents in suitUS 11,828,425 - Boe Technology Group Co., Ltd. v. Optronic Sciences, LLCAll claims unpatentablePTAB · Jan 26, 2026 · IPR2024-01133 · APJ Thu A Dang · IPR · Final written decision
Claims 1–13 are unpatentable: claims 1–5, 9, and 12–13 as anticipated by Weaver, and claims 6–8 and 10–11 as obvious over the stated combinations.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1354–55 (Fed. Cir. 2001) (holding that absent evidence to the contrary, “the prior art itself [may] reflect[] an appropriate level” of ordinary skill in the art). In general, we agree with the areas of agreement in the parties’ proposals. In particular, Patent Owner proposes “at least a Bachelors’ degree in a field of engineering or physics,” which includes “electrical engineering or a comparable field of study” as Petitioner proposes. Pet. 4 (emphasis added); PO Resp. 10. We agree with Petitioner that by defining the engineering field as “electrical” or “comparable,” we can exclude engineering fields “having nothing to do with displays, such as biomedical, civil, chemical or environmental engineering.” Pet. Reply 1. Petitioner also proposes approximately “one or more years of professional experience” which includes Patent Owner’s “at least two years of professional experience.” Pet. 4; PO Resp. 10. Furthermore, both parties agree that “[a]dditional graduate education could [reduce . . . the time requirement] for professional experience.” Id. Thus, we adopt both parties’ proposed POSITA of having a Bachelors’ degree in electrical engineering or a comparable field of study, plus at least two years of professional experience, wherein additional graduate education could reduce the time requirement for professional experience. Id. Such proposal comports with the level of ordinary skill in the art reflected in the prior art of record.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownOther
“The plain language in claim 1 of “auxiliary electrode” does not preclude that the “electrode” may be a power line, bus line, or resistor. Ex. 1001, 8:47–52. Nothing in the Specification clearly precludes “auxiliary electrode” from being a “bus line” or “power line,” as Patent Owner proposes. PO Resp. 25–27. We are unpersuaded by Patent Owner’s contention that the Specification discloses that “the power line ‘PL’ is shown in Figure 1, but the power line PL is not an electrode that is shown in Figure 2.” Id. at 26–27. Here, Patent Owner points to no portions in the Specification that provide the requisite “reasonable clarity, deliberateness, and precision” to warrant interpreting the claim language at issue as supporting Patent Owner’s contention that an auxiliary electrode cannot be a power line, bus line, or resistor. Id.; In re Paulsen, 30 F.3d 1475, 1480 (Fed. Cir. 1984). That is, although Patent Owner points to Figures 1 and 2 of the Specification for support of its contention, Figures 1 and 2 of the Specification merely show various examples of power line and an auxiliary electrode. PO Resp. 26–27. Thus, although the referenced portions of the Specification discuss various examples wherein an auxiliary electrode may be implemented, nothing in these referenced portions of the Specification clearly precludes the “auxiliary electrode” from being a power line or any electrode that is “the road to get to an end point,” as Patent Owner contends. Id. Patent Owner points to no special definition, implicit or explicit, for “auxiliary electrode” that is set forth in the Specification which supports Patent Owner’s construction with reasonable clarity, deliberateness, and precision. Paulsen, 30 F.3d at 1480.” slip op. at 15
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“We find Patent Owner’s arguments unavailing. In particular, we find unavailing Patent Owner’s contention that “‘bus line 430’ is not an ‘auxiliary electrode’” (PO Resp. 28–33), because Patent Owner is relying on a claim construction of “auxiliary electrode” as precluding “essential” elements and requiring “more than the end structure of a conductor” (id.), that is not adopted by our construction discussed above. Here, we are persuaded by Petitioner’s reliance on Weaver’s bus line 430 for providing the claimed “electrode,” that is “supplemental to other electrodes in the structure.” Pet. 18; see also Ex. 1004 ¶ 26, Fig. 4; Ex. 1003 ¶ 92. We find availing Petitioner’s contention, supported by Dr. Baker’s testimony, that a POSITA would have understood that “anode 406 and bus line 430 are connected in parallel,” which means that “bus line 430 is a supplemental electrode that reduces the total resistance of the pixel structure.” Pet. 19; Ex. 1003 ¶ 94. Thus, we find availing Petitioner’s contention, supported by Dr. Baker’s testimony, that Weaver’s bus line 430 is an electrode supplemental to other electrodes in the structure that is electrically insulated from transistor 410 by passivation layer 409, wherein OLED 400, which includes cathode 422, organic layer 424, and anode 406, is disposed above bus line 430, and wherein anode 406 of OLED 400 is electrically connected to bus line 430 by via 428. Pet. 16–19; Ex. 1003 ¶¶ 89–94. That is, we find availing Petitioner’s contention that, like the ’509 patent’s auxiliary electrode 120, bus line 430 is electrically insulated from transistor 410, wherein OLED 400 is disposed above bus line 430 and anode 406 electrically connected with bus line 430. Compare Pet. 2–3 (annotated” slip op. at 26
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“We also find unavailing Patent Owner’s contention that the proposed modifications to Weaver would involve changing the process. PO Resp. 33– 34. We agree with Petitioner, whose contentions are supported by Dr. Baker’s testimony, that “to provide additional components from the same layer is a layout change that a POSITA would have been able to perform without changing the process.” Pet. Reply 17–18 (citing Ex 1003 ¶ 157; Ex. 1020 ¶ 45). Further, contrary to Patent Owner’s contention that POSITA would not have combined Weaver with Lee ’053, Song, Lee ’149, or Bae without the use of hindsight (PO Resp. 33–45), as Petitioner points out, Lee ’149, for example, “explicitly teaches that ‘the electrode pattern 45 serves to lower the resistance of the first electrode 41.” Pet. Reply 58 (citing Ex. 1011 ¶ 38). Similarly, Bae “explicitly teaches that the “auxiliary electrodes 139 contact the first electrode 132 to commonly apply a voltage to the sub-pixels” and “reduces the resistance of the first electrode.” Id. at 66 (citing Ex. 1012 ¶¶ 37, 59). As such, Petitioner’s proposed combinations are supported by at least by Lee ’149’s and Bae’s teachings of applying a second electrode to lower the resistance and voltage drop between anode 406 and the VDD line of Weaver. See, e.g., Ex. 1011 ¶ 38; Ex. 1012 ¶¶ 37, 59. We are persuaded by Dr. Baker’s testimony that a POSITA would have understood that higher resistance between the power or ground line to the light emitting device would consume more power and require higher operating voltages, and thus, would have been motivated to implement the solutions of Lee ’053, Song, Lee ’149, or Bae to lower the resistance between anode 406 and voltage source VDD in Weaver. Ex. 1003 ¶¶ 145, 158, 184, 203. We agree with Petitioner, supported by Dr. Baker’s testimony, that a POSITA would have had a reasonable expectation of success the combining the references as suggested, wherein such modification “involves modifications of only routine skill in the art,” which “involve known method,” and “would have yielded predictable results. Pet. 42, 48–49, 59, 67–68; Ex. 1003 ¶¶ 145, 158, 184, 203. That is, we determine that Petitioner has set forth reasoning with rational underpinning explaining why it would have been obvious to combine the teachings with a reasonable expectation of success. Based on the complete record presented, we determine Petitioner has shown by a preponderance of the evidence that claims 6–8 would have been obvious over the combination of Weaver and Lee ’053 or alternatively over the combination of Weaver and Song, and that claims 10 and 11 would have been obvious over the combination of Weaver and Lee ’149 or alternatively over the combination of Weaver and Bae.” slip op. at 33
Patent outcomesUS 9,263,509 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,263,509 - Boe Technology Group Co., Ltd. v. Optronic Sciences LLCSome claims unpatentablePTAB · Jan 26, 2026 · IPR2024-01130 · APJ Benjamin D M Wood · IPR · Final written decision
Claims 5 and 6 are unpatentable over the instituted grounds; claims 7–9 were not shown unpatentable because their scope could not be ascertained.
RulingsFinal written decision- PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner
“After the hearing, with our authorization,1 Patent Owner moved to dismiss this proceeding because, according to Patent Owner, the Petition did not identify all real parties-in-interest as required be 35 U.S.C. § 312(a)(2). 1 IPR2024-01131, Paper 43, 45:1–8. Paper 42. Petitioner opposed the motion. Paper 44. We denied the motion. Paper 46.” slip op. at 2
- Skill levelSkill level board ownOther
“arguments and evidence in support of its proposed definition of the level of ordinary skill in the art at the time of the invention, we determine that Petitioner’s definition is too broad. Petitioner asserts that one of ordinary skill in the art would have “approximately one or more years of professional experience with electronic and optoelectronic system design.” Pet. 3. But Petitioner does not appear to dispute the testimony of Patent Owner’s declarant, Dr. Bretschneider, that “the field of optoelectronics” is “broad and expansive and encompasses solar cells, optical fiber, and any application of LEDs, not just the design of LED packages.” Ex. 2020 ¶ 78. Therefore, one having experience with optoelectronic system design would not necessarily have experience designing LED backlights for LCD displays. We have also carefully considered Patent Owner’s arguments and evidence in support of its proposed definition of the level of ordinary skill in the art at the time of the invention. In light of our analysis of the prior art and the AAPA, we determine that Patent Owner’s requirement of “at least one year of practical experience in design of LED packages and one year of practical experience in design of thermal management systems for LEDs” is not sufficiently precise. Patent Owner does not specify that the required experience is in the context of designing LED backlights for LCD displays. One having this experience would necessarily have experience addressing thermal-management concerns associated with such backlights.” slip op. at 18
- Expert testimonyPetitioner expert discountedDecided for patent owner
“Because Dr. Baker does not have the requisite experience designing LED backlights for LCD displays, he is not qualified to offer expert testimony from the vantage point of a person of ordinary skill in the art of designing LED backlights for LCD displays. Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1377–78 (Fed. Cir. 2022).” slip op. at 23
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“Neither party asserts that “connecting” is a term of art requiring expert testimony to construe. We agree with Petitioner that “connecting” should be construed consistently with the “fastener” term, because it is the “fastener” (or the second portion thereof) to which the circuit board is “connecting.” Because the parties agree that “fastener” is “[a] feature that attaches or holds something in place, “connecting” means “attaching or holding.”” slip op. at 26
Patent outcomesUS 7,168,842 mixedClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,168,842 - Samsung Display Co., Ltd. v. Pictiva Displays International Ltd.Some claims unpatentablePTAB · Jan 22, 2026 · IPR2024-01094 · APJ Grace Karaffa Obermann · IPR · Final written decision
Claims 1, 2, 6, and 8–14 are unpatentable as obvious over Ma; claims 3 and 4 were not shown unpatentable over Werner.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends: A person of ordinary skill in the art (“POSA”) at the time of the alleged invention of the ’223 patent would have had a university degree in chemistry and additional expertise or a second university degree in the field of electrical engineering, particularly optoelectronics, or alternatively a university degree in electrical engineering and additional expertise or a second university degree in the field of chemistry. The person of ordinary skill in the art has spent several years studying the structure and function of organic optoelectronic components, in particular OLEDs, and has detailed knowledge of the chemical structure of light-emitting organic layers and the transport of charge carriers to these layers. In this respect, the person of ordinary skill in the art works at the interface between electrical engineering/physics (charge carrier transport and light emission processes in optoelectronic components) and chemistry, in particular organic chemistry (materials and layer stack combinations suitable). Pet. 14 (citing Ex. 1003 ¶¶ 46–47). Patent Owner does not dispute Petitioner’s contention. See generally Resp. Neither party indicates that the result would change depending on the definition selected. We adopt Petitioner’s uncontested proposed definition, because it is consistent with the disclosures of the asserted prior art references. See Ex. 1005, (code 57); Ex. 1007, 8107 (abstracts of the references asserted in the patentability challenges).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under that standard, claim terms generally are given their plain and ordinary meaning as would have been understood by the ordinarily skilled artisan at the time of the invention and within the context of the entire patent disclosure. See Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). We construe claim terms only as relevant to the parties’ contentions and only to the extent necessary to resolve the issues in dispute. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999); Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017). Neither party indicates that an express construction for any claim term is necessary to resolve the disputes at hand. Pet. 15; see generally Resp. On this record, we determine that no claim term requires express construction for purposes of this Decision. In our analysis of the challenges, however, we discuss the meaning of the terms “metal complex” and “central metal atom,” which appear in claim 1 (Ex. 1001, 19:19–20) to the extent necessary to resolve Patent Owner’s contention that Petitioner fails to establish that Ma invalidates claim 1. See Resp. 53, 56–58.” slip op. at 9
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“Whether Ma qualifies as a “printed publication” involves an inquiry into the facts and circumstances surrounding the reference’s disclosure to members of the public. In re Klopfenstein, 380 F.3d 1345, 1350 (Fed. Cir. 2004). A reference is considered “publicly accessible” upon a satisfactory showing that the document has been “disseminated or otherwise made available to the extent that persons interested and ordinarily skilled in the subject matter or art exercising reasonable diligence[] can locate it.” Kyocera Wireless Corp. v. ITC, 545 F.3d 1340, 1350 (Fed. Cir. 2008); see Hulu, LLC v. Sound View Innovations, LLC, IPR2018-01039, Paper 29, 10– 11 (PTAB Dec. 20, 2019) (precedential).” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“Based on the information presented, we find Petitioner has the better position. Patent Owner admits that joint vaporization means “two materials vaporize together.” Reply 21 (quoting Resp. 54). As Petitioner argues, “This is what Ma discloses.” Id. We agree with Petitioner that Ma describes a “two-component” electron transport layer having a “thickness with one value.” Id.; see Ex. 1007, 811 (reporting a “co-deposited” application of “BPhen:LiQ” that is “50 nm thick”). Ma’s disclosure, thereby, strongly “indicates that the two components were vaporized together––as opposed to creating a ‘macroscopically homogenous form’” prepared by sequentially vaporizing the individual components as Patent Owner “hypothesizes.” Reply 21 (citing Ex. 1020 ¶¶ 42–44; Ex. 2041 ¶¶ 155–157); see Resp. 54– 55; see also Ex. 1007, 811 (Ma’s description of its device fabrication, appearing in the third paragraph of the experiments section). Petitioner further advances evidence that “[p]reparing a layer that is ‘macroscopically homogeneous’ but potentially microscopically heterogeneous,” as Patent Owner postulates, “would introduce excessive variability and render the data noncomparable and unreliable, thus undermining the experiment’s purpose.” Reply 21 (citing Ex. 1020 ¶ 44); see Resp. 54–55. Patent Owner presents no counterargument or evidence that is persuasive to undercut Petitioner’s reasoning or evidence on that point. See Sur-reply 19–22. Petitioner also argues that an ordinarily skilled artisan would have recognized “that vaporizing materials together would best achieve Ma’s objective of assessing the current density using different Liq doping percentages.” Reply 22 (citing Ex. 1007, 811; Ex. 1020 ¶ 51). Here again, Petitioner’s evidence on point stands uncontested. See Sur-reply 19–22 (declining to contest that point). On this record, therefore, we agree with Petitioner that, as to the relevant disclosure in Ma, “the most natural interpretation of ‘co-deposition’ for forming a layer, particularly when there is nothing to indicate that the materials” are “vaporized sequentially,” is that the materials are co-deposited by joint vaporization. Reply 22 (citing Ex. 1020 ¶ 46–51). We further agree that, “[u]nder a preponderance standard, Ma’s disclosures are sufficient to render joint vaporization at least obvious.” Id. For the above reasons, we determine that Petitioner demonstrates by a preponderance of the evidence that Ma discloses joint vaporization as required by the challenged claims.” slip op. at 15
Patent outcomesUS 8,558,223 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 8,558,223 - Samsung Display Co., Ltd. v. Pictiva Displays International Ltd.All claims unpatentablePTAB · Jan 22, 2026 · IPR2024-01093 · APJ Grace Karaffa Obermann · IPR · Final written decision
Claims 1–16 are unpatentable: claims 1–13 and 15–16 on anticipation and obviousness grounds, and claim 14 on obviousness over Choulis.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“A person of ordinary skill in the art (“POSITA”) at the time of the alleged invention of the ’164 patent would have had a Bachelor’s degree in chemistry, physics, or a comparable field of study, and at least three years of research or industrial experience with organic optoelectronic light-emitting devices. An individual with additional education could have less research or industrial experience and vice versa. Pet. 12. Patent Owner repeatedly refers to “a POSITA” without addressing the definition of that term or contesting Petitioner’s proposed definition. See Resp. 1, 2 n.1, 3, 8, 9, 15–21, 23, 26, 29, 32–33, 35, 37, 38, 40, 41, 44–49, 51–57, 61, 62 (bare references to “a POSITA”). Neither party indicates that the ultimate result on patentability would change depending on the definition selected. We adopt Petitioner’s proposed definition, which is not contested, because it is consistent with the disclosures of the asserted prior art. See Ex. 1004, (code 57); Ex. 1006, code (57); Ex. 1008, code (57); Ex. 1009, code (57) (abstracts of the references asserted in the patentability challenges).” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageDisclaimer not foundTerm construed board ownDecided for petitioner
“because no information raised during the trial phase of this review changes the calculus: First and foremost, the plain terms of claim 1 include no language from which we reasonably can impose limits on the phrase “matrix material” as urged by Patent Owner. In addition, the specification includes no special definition of that phrase that supports importing Patent Owner’s proposed narrowing limitation into the claim. Furthermore, we are directed to no disclaimer of claim scope during patent prosecution that would support Patent Owner’s twice-rejected argument that the phrase “matrix material” in claim 1 excludes embedded dopants and dispersed agglomerations. And the extrinsic evidence advanced by Patent Owner during this review is ineffective to override the clear interpretation of “matrix material” that is established by the intrinsic evidence. Reply 1–7.10” slip op. at 8
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableNot shown unpatentableMixed
“We find that Petitioner establishes by a preponderance of the evidence that Choulis anticipates claim 13. We agree with Petitioner, in that regard, that Choulis explicitly teaches “using spin-coating as a method for depositing materials, which involves a simultaneous application process” as required by claim 13. Reply 16 (citing Pet. 40–41; Ex. 1044 ¶ 45).16 We 15 Petitioner raises Djobo as a background reference supporting that Choulis anticipates deposition of PVK by evaporation. Pet. 41. Patent Owner counters that Djobo, to the contrary, shows that Choulis does not teach deposition of PVK by evaporation. Resp. 48. In other words, both parties cite Djobo in connection with the ground based on anticipation by Choulis. Against that backdrop, we determine that Patent Owner waives any argument that Petitioner improperly cites Djobo as a background reference in support of the anticipation challenge, which is based on Choulis alone. Resp. 48 (nowhere asserting that the challenge is deficient on that basis). That waiver arises because no argument, in that regard, is raised in Patent Owner’s Response see Inst. Dec. 34 (“The Board shall deemed waived any issue not raised by Patent Owner in a timely response to the Petition . . . .”). 16 Patent Owner’s statement that “spin coating tends to cause phase separation” is not developed adequately on this record and, therefore, is further agree with Petitioner that Patent Owner “has not contested this point.” Resp. 48. “Therefore, there is no genuine dispute regarding the unpatentability of claim 13,” although Patent Owner raises “arguments concerning evaporation, which is a distinct process from spin-coating” relevant to the additional limitations of claim 14. Reply 16. We determine that Petitioner establishes by a preponderance of the evidence that Choulis anticipates claim 13. Patent Owner, however, has the better position on whether Choulis anticipates claim 14, which “includes the requirement of applying matrix materials via evaporation coating.” Reply 16. Petitioner seems to abandon that challenge in the Reply by raising arguments that appear, on this record, to bear exclusively on whether the subject matter of claim 14 would have been obvious over Choulis.17 Id. at 16–17. Those arguments are insufficient to counter Patent Owner’s reasons why Choulis does not anticipate the “evaporation coating” limitation of claim 14. Compare id., with Resp. 48. On this record, therefore, we determine that Petitioner does not establish by a preponderance of the evidence that Choulis anticipates claim 14. unpersuasive to persuade us “that Choulis does not have three matrix materials.” Sur-reply 15. That argument runs counter to Choulis’s explicit, intrinsic disclosures, which illustrate (Ex. 1004, Fig. 4) and describe (id. ¶ 30) an organic light emitting layer composed of three matrix materials. See Pet. 24–25 (citing Ex. 1004, Fig. 4, ¶ 30); see also Ex. 1003 ¶¶ 85–88 (persuasive declaration testimony of Dr. Holmes, cited at Pet. 24–25). 17 There is some confusion on this point, given that both parties sometimes collapse, into a single argument, whether Choulis anticipates or renders obvious claim 1. Compare Resp. 48, with Reply 16–17.” slip op. at 35
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable
“On this record, therefore, we determine that Choulis, at minimum, suggests that a person of ordinary skill in the art at the time of the invention would have recognized PMMA as a suitable alternative to PVK in Choulis’s Figure 4 embodiment, notwithstanding any differences raised by Patent Owner. Ex. 1004 ¶ 44. Patent Owner’s argument that no disclosure in Choulis suggests that an ordinarily skilled artisan “would have found it desirable to use PMMA in place of PVK in Choulis’s devices” misses the mark, where Choulis includes both PMMA and PVK in lists of materials suitable for use as host or matrix materials. Resp. 38; Ex. 1004 ¶ 44. “Our caselaw is clear. It’s not necessary to show that a combination is ‘the best option, only that it is a suitable option.’” Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 800 (Fed. Cir. 2021). Even if Choulis does not expressly disclose substituting PMMA for PVK in the Figure 4 embodiment, “an ordinarily skilled artisan would have found it obvious to make that substitution.” Reply 10 (citing Pet. 31 (citing Ex. 1003 ¶ 100; Ex. 1044 ¶ 23)). The suggestion for that substitution is set forth unambiguously in Choulis’s listing of both “PVK” and “PMMA” as materials suitable for use as a first “host” material in Choulis’s organic functional layer; that is, “the light emitting layer” that is “described above” in Figure 4. Ex. 1004 ¶ 44. ii. Alternative Reasoning for Replacing PVK with PMMA Patent Owner counterargues that using PPMA in place of PVK would have been understood to “upset the hole and electron balance,” as well as “affect hole-charge recombination,” and “degrade the performance of the resulting OLED system.” Resp. 37. Petitioner responds with evidence that “it would have been a routine task for” an ordinarily skilled artisan “to optimize the composition of each component within the light-emitting layer to achieve the desired charge balance.” Reply 11 (citing Ex. 1004 ¶ 24). Petitioner’s response brings to light a second reason why an ordinarily” slip op. at 40
Patent outcomesUS 8,723,164 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,723,164 - Samsung Display Co., Ltd. v. Pictiva Displays International Ltd.All claims unpatentablePTAB · Jan 22, 2026 · IPR2024-01095 · APJ Garth D Baer · IPR · Final written decision
Claims 2, 4, 9–12, and 17 are unpatentable under § 103 over the Diekmann- and Suzuki-based combinations with the respective secondary references.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“had a Bachelor’s degree in chemistry, physics, or a comparable field of study, and at least three years of research or industrial experience with organic optoelectronic light-emitting devices.” Pet. 10. Further, “[a]n individual with additional education could have less research or industrial experience and vice versa.” Id. Patent Owner does not dispute Petitioner’s formulation. See generally PO Resp. We adopt Petitioner’s uncontested proposed definition because it is consistent with the disclosures of the asserted prior art. See, e.g., Ex. 1006, code (57); Ex. 1011, code (57).” slip op. at 7
- BurdenUnpatentable
“III. OBVIOUSNESS ANALYSIS Petitioner contends that claims 2, 4, 9–12, and 17 are unpatentable under 35 U.S.C. § 103. For the reasons explained below, we find that Petitioner has shown by a preponderance of evidence that these claims are unpatentable over the asserted prior art.” slip op. at 7
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“Resp. 16–24. We addressed this same issue in our Final Written Decision in IPR2024-01094. IPR2024-01094, Paper 42 at 9–13. As we explained there, Ma qualifies as prior art printed publication because the record evidence supports what Ma says on its face—that it was published online on August 29, 2008 by an Elsevier, an established publisher, in Synthetic Metals, which is a reputable journal. Id. For the same reason explained in IPR2024-01094, we agree with Petitioner that Ma qualifies as a prior art printed publication.” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“additional feature in claims 2 and 12, Patent Owner raises a number of challenges to Petitioner’s asserted rationale for combining Ma. See PO Resp. 27–47. First, Patent Owner asserts that skilled artisans would not have used Ma’s Liq dopant in Diekmann/Suzuki because both employ electron-donor dopants that operate differently from Liq’s electron-hopping dopant. Id. at 28–31. We disagree with Patent Owner’s argument because it highlights a difference in the references’ dopants without identifying any incompatibility. Even if Diekmann and Suzuki teach electron-donor type ndopants as Patent Owner asserts, neither precludes or disparages Ma’s electron-hopping dopant. See In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004) (“The prior art’s mere disclosure of more than one alternative does not constitute a teaching away from . . . alternatives because such disclosure does not criticize, discredit, or otherwise discourage the solution claimed.”). As Petitioner explains, “Liq acts as an n-dopant in Ma,” which “increases ETL conductivity.” Pet. Reply 10. Patent Owner does not contest that Liq acts as an n-dopant in Ma. See Pet. Reply 30. Thus, Petitioner’s proposed combinations “substitute one known n-dopant for another to further the same goal of improving ETL conductivity.” Pet. Reply 10. Next, Patent Owner faults Petitioner for failing to show that using Ma’s Liq dopant in Diekmann’s/Suzuki’s ETL would result in lower diffusion or higher efficiencies as compared to Diekmann’s/Suzuki’s preferred n-dopants, which included cesium, barium, or lithium fluoride. PO Resp. 31–35; see PO Sur-reply 4–5. We disagree with Patent Owner’s argument because Petitioner does not need to show that Ma’s Liq n-dopant “was an improvement in a categorical sense” over Diekmann’s/Suzuki’s n-dopants, so long as Ma’s n-dopant was known and one skilled in the art would understand that implementing it had advantages. See Intel Corp. v. Pact XPP Schweiz AG, 61 F.4th 1373, 1381 (Fed. Cir. 2023) (quotation marks omitted); In re Fulton, 391 F.3d 1195, 1200 (Fed. Cir. 2004) (“[O]ur case law does not require that a particular combination must be the preferred, or the most desirable, combination described in the prior art.”). Petitioner does not assert skilled artisans would have used Liq because it was a superior to Diekmann’s/Suzuki’s preferred dopants, but because doping ETLs with Liq had known benefits including lower driving voltage and enhanced power efficiency from enhanced carrier injection increased transport conductivity, as compared to an undoped device. Pet. 37 (citing Ex. 1010, 813). That other potentially suitable or even superior n-dopants were also known does not make Liq nonobvious. Given Liq’s benefits outlined above, Petitioner has articulated sufficient reasoning with rational underpinning to support the legal conclusion that its proffered combination of Ma’s known dopant in Diekmann’s/Suzuki’s device would have been obvious to one skilled in the art. See KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 418 (2007).” slip op. at 11
Patent outcomesUS 11,828,425 unpatentable§ 102 anticipation§ 103 obviousnessPatents in suitUS 11,828,425 - PTAB · Jan 15, 2026 · IPR2025-01231 · APJ Mary C Hoffman · IPR · Institution
The Board instituted IPR on claims 1–13 on all asserted grounds, finding a reasonable likelihood that at least one challenged claim is unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner
“petition identifies all real parties in interest. 35 U.S.C. § 312(a)(2). Whether an unnamed party is a real party in interest “is a highly fact-dependent question.” See Applications in Internet Time, LLC v. RPX Corp., 897 F.3d 1336, 1351, 1360 (Fed. Cir. 2018) (“AIT”); Ventex Co., Ltd. v. Columbia Sportswear N. Am., Inc., IPR2017-00651, Paper 152 at 4–5 (PTAB Jan. 24, 2019) (precedential) (citing Worlds Inc. v. Bungie, Inc., 903 F.3d 1237, 1242 (Fed. Cir. 2018)); Consolidated Trial Practice Guide, 13 (2019), https://www.uspto.gov/sites/default/files/documents/tpgnov.pdf (CTPG). “A common consideration is whether the non-party exercised or could have exercised control over a party’s participation in a proceeding.” CTPG at 16. Other considerations include whether the non-party is funding or directing the proceeding; the non-party’s relationship with the petitioner; the non-party’s relationship to the petition itself, including the nature and/or degree of involvement in the filing; and the nature of the entity filing the petition. Id. at 17–18.” slip op. at 8
- Skill levelSkill level board ownOther
“person of ordinary skill in the art (“POSITA”) “would have at least a bachelor’s degree in electrical engineering or a related field and at least two years of experience with lighting technology.” Pet. 2 (citing Ex. 1017 ¶ 35). Petitioner makes additional contentions about what a POSITA would have understood. Id. (“A POSITA would understand that all types of cameras (e.g., analog and digital, photo and video) generally involve the same lighting considerations . . . . [and] that it is important to provide light that evenly illuminates the target subject or object to minimize reflected glare and shadows.”). Patent Owner contends that a POSITA would have at least: (a) a bachelor’s degree in electrical engineering, optical engineering, or a related field; (b) two years of practical experience in designing and developing lighting systems, particularly those integrated with electronic devices such as webcams or computer monitors; and (c) knowledge of user-interface considerations for consumer electronics . . . . Additional experience can substitute for education and vice versa. Prelim. Resp. 12 (citing Ex. 2036 ¶ 48). Patent Owner disputes Petitioner’s contentions regarding what a POSITA would have understood. Prelim. Resp. 12–13 (“[O]ne of ordinary skill in the art would have understood that analog and digital cameras have different operating principles and lighting requirements [and] Petitioner’s lack of appreciation for the suitability and unsuitability of different lights for different applications infects and dooms its invalidity analysis.” (citing Ex. 2036 ¶¶ 36–47)). and years of experience required for a POSITA. Pet. 2; Prelim. Resp. 12. For purposes of this Decision, we consider a person of ordinary skill in the art to have a bachelor’s degree in electrical engineering or related field and two years of practical experience in lighting technology, and that additional experience may substitute for education and vice versa, which is consistent with the level of skill reflected in the ’729 patent and prior art of record. See Exs. 1001, 1005–1010, 1012–1015; see also Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))).” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Patent Owner agrees that the Board need not formally construe any claim terms in order to adjudicate the merits of the Petition and argues Petitioner fails to show unpatentability of any claim under any reasonable construction of the claims. Prelim. Resp. 13 (citing Ex. 2036 ¶ 51). We determine that no express claim construction is necessary to determine whether institution is warranted in this proceeding. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only terms in controversy must be construed “and only to the extent necessary to resolve the controversy”) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 14
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“claimed subject matter and the prior art are “such that the subject matter as a whole would have been obvious at the time the invention was made to a person having ordinary skill in the art to which said subject matter pertains.” KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 406 (2007). When a ground in a petition is based on a combination of references, we consider “whether there was an apparent reason to combine the known elements in the fashion claimed by the patent at issue.” Id. at 418 (citing In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006)). We base our obviousness inquiry on factual considerations including (1) the scope and content of the prior art, (2) any differences between the claimed subject matter and the prior art, (3) the level of skill in the art, and (4) any objective indicia of obviousness or non-obviousness that may be in evidence.14 See Graham, 383 U.S. at 17–18.” slip op. at 24
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,841,729
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.